Used Shelf Connectors For Double Shelf Series for sale (17,802)

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Kledpfx Aaoxnlgcjyor Storage location: Garbsen

Condition: used, Year of construction: 1987, faceplate diameter 3600 mm Kljdoyz Db Uopfx Aayor swing diameter 4500 mm turning height 1850 mm turning speed range 0,6- 50 U/min weight of the machine ca. 72 t verticale turning machine double coloumn - digital scale - double coloumn - 2x ram - movable cross slide - extra toolholder (four station) on the side of facing plate

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,577 kg, axle configuration: 3 axles, first registration: 06/2023, total length: 13,550 mm, total width: 2,600 mm, suspension: air, wheelbase: 760 mm, color: white, Year of construction: 2023, Equipment: cooling unit, full service history, power assisted steering, Technical specifications FP 60 SMART. Variable height double deck V7 1650 for 11x3 EURO pal with 22 ALU beams. CARRIER VECTOR 1550, with E-Motor and battery. Installation package for mono temp fridge,SKO. FP double leaf insulated rear door, NX17 foam, w. double stainl. steel lock. mech Plastic toolbox with cover holder, sleeves and drawer behind the unit. SCHMITZ black plastic fuel tank 245l 1 filling neck; BIO-Diesel proofing. Tyres 385/65 R22.5. Kedsyy H Dvjpfx Aayslr Overall length - 13550 mm. Overall trailer width - 2600mm. Total height (unladen) - 4000 mm. Pallet rack for 36 Euro/ 24 ISO pallets. ROTOS SCB running gear (disc brakes). Lifting front axle. 1 insulated ventilation flap in the left hand rear door at the top.

Condition: used, Year of construction: 2002, cutting height (max.): 100 mm, cutting width (max.): 2,500 mm, saw blade diameter: 400 mm, saw blade bore: 50 mm, total length: 4,400 mm, total width: 3,600 mm, total height: 1,100 mm, overall weight: 1,500 kg, No. 3270 Double cut-off saw Eima 122 Used, year of construction 2002 Double cut-off saw / double crosscut saw 2 motors, 4.4 kW Both saw units are swiveling Maximum saw blade diameter 400 mm Bore 50 mm Cutting width 210 - 2500 mm Cutting depth 2500 mm Cutting height 100 mm Vacuum suction for workpiece clamping Automatic width adjustment defective, cutting width is currently adjusted using the hand crank Installation dimensions approx. 4400 x 3600 x 1100 mm LWH Weight approx. 1500 kg Kjdjy Ef Hyspfx Aayslr Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: used, Year of construction: 1965, pressure 160 t stroke 15 - 170 mm no. of strokes 15 - 40 /min distance between columns 2050 / 1900 mm dayligth (stroke and adjustment up) 690 mm column travel -side 800 mm table surface area 1600 x 800 mm table height over floor 900 mm ram surface 1620 x 700 mm ram adjustment 140 mm power requirement 15,0 kW Weight 24,0 t dimensions of the machine ca. 3,3 x 2,3 x 5,3 mxmxm Kedpfx Aovuk S Usayelr total height over floor 4,8 m height under floor 0,5 m permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch, pneumatic counterbalance in ram, motoric ram adjustment, two-hand and foot operation as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1979, pressure 60 t distance between columns 650 mm stroke 220 mm distance table/ram, max. stroke up, adjustment up 410 mm table surface area 600 x 525 mm pressure of drawing cushion in table 5 t stroke of drawing cushion in table 80 mm table height over floor 900 mm side window 200 mm ram surface 560 x 490 mm dimensions (WxDxH) 1,9 x 1,3 x 2,7 m Klodjvuk Nmepfx Aaysr permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, light-guard (Sick FGS 600), hydraulic drawing cushion in table, two-hand and foot operation No foundation pit necessary can be offered without or with putting into operation in given condition

Condition: used, Year of construction: 1980, pressure 50 t distance between columns 1750 mm stroke 500 mm Distance table/ram, max. stroke up, adjustment up 800 mm table surface area 1700 x 750 mm table height over floor 800 mm side window 650 x 750 mm ram surface 1700 x 750 mm power requirement 11,0 kW weight 11,0 t Dimensions (WxDxH) 2,1 x 1,15 x 3,4 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way Kjdpovuk Ngjfx Aayelr No foundation pit necessary can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 1983, pressure 160 t stroke fix 160 mm Ksdpfxevuk E Uj Aayelr no. of strokes 30 - 120 /min distance between columns 1190 mm dayligth (stroke and adjustment up) 735 mm column travel -side 600 mm table surface area 1200 x 1000 mm hole in the table 500 x 300 mm table height over floor 900 mm ram surface 1000 x 800 mm ram adjustment 125 mm material width 550 mm material thickness 0 - 6,0 mm material cross-cut 1100 mm² feed length 350 mm power requirement 45,0 kW Weight 25,0 t dimensions of the machine ca. 2,3 x 2,1 x 4,7 mxmxm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive (PIV), hydraulic overload protection in ram, motoric ram adjustment, pneumatic counterbalance in ram, ram interlocking, centralized lubrication, mechanical pincer feed (Haulick, RS 350/550 SL 90) as is where is, WITHOUT putting into operation

Condition: excellent (used), functionality: fully functional, Usable cutting length: 4000 mm Blade diameter: 500 mm Pneumatic head tilting Kedpfx Aoy Ax R Heayelr Tilting 90°/45-22.5° Touch probe

Condition: used, Year of construction: 2007, faceplate diameter 2500 mm max. swing diameter over bed 2700 mm turning height 2500 mm Control Siemens 840D CNC workpiece weight max. 30 t workpiece dia. 2500 mm Crossbar travel distance every 100 mm 1200 mm Piston rod 1500 mm ram diameter 250 x 250 mm traversing speed 8 m/min Max. vertical feed rate 6000 mm/min Max. cross feed 8000 mm/min Speed of the machine table 180 U/min tool changing time 1 min cutting speed 140 m/min Cutting depth 14 mm Power Capacity of main drive 100 kW weight of the machine ca. 47 t dimensions of the machine ca. 12,5 x 8,0 x 6,7 m Features/Accessories: - Crossbars every 100 mm, including locking mechanism - 2 ram units with a cross-section of 250 x 250 mm; travel distance 1500 mm - Both ram units can be moved through the center (100 mm each, i.e., both ball screws are offset from each other with collision protection - ZF gearbox for main drive: AC 100 kW / S1 Siemens, speed 0–180 rpm - 2 tool changers, each with 16 stations - Max. tool weight 50 kg; max. 800 kg in the tool changer - 2 Renishaw touch probes with zero-point touch - Renishaw touch probe for workpiece measurement Kljdjy Dvlwepfx Aayor

Condition: used, machine/vehicle number: 008269, Position 1: Panel Feeding and Loading IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Ksdpfx Aasx A Hggeyolr Position 2: Panel Turning Device IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 3: Double Sided Squaring/Edgebanding Machines IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 4: Panel Turning Device IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 5: Panel Stacking and Offloading IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3

Condition: excellent (used), 2 component gun, multi-function gun, cartridge gun, cartridge press, double cartridge dosing gun, 2K mixing gun -Manufacturer: Plunger, double cartridge dispensing gun Mixpac Strap Kit -Number: 2x cartridge gun available Kledpfsu Aigkex Aayer -Price: per piece -Dimensions: 300/210/H85 mm -Weight: 1.2 kg

Condition: used, Year of construction: 1979, pressure 1000 t distance between columns 3030 mm stroke 350 mm Distance table/ram, max. stroke up, adjustment up 1400 mm table surface area 3000 x 2000 mm table height over floor 430 mm side window 1450 x 1400 mm ram surface 3000 x 2000 mm speed down 300 mm/s speed up 340 mm/s working speed 18 - 44 mm/s return capacity 120 t oil volume 4400 l width with platform 4950 mm power capacity 2 x 90,0 + 10,0 kW weight 87,0 t Dimensions (WxDxH) 4,35 x 3,65 x 7,55 m height over floor 6,05 m height beneath floor 1,5 m SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work stored in partly dismantled condition Kledpfovuk I Asx Aaysr free loaded to truck

Year of construction: 2026, condition: new, Compact and reliable mechanical decoilers for light and medium coil handling with multiple capacity options. Bosporas Machinery is a manufacturer of coil processing and press feeding systems, delivering high-performance and customized industrial solutions worldwide. Our mechanical decoilers are designed for efficient, stable and cost-effective coil handling in various industrial applications. These machines offer reliable unwinding performance with compact design and easy operation, making them ideal for press feeding lines and light coil processing systems. The system is based on a mechanical expansion mandrel structure combined with motor-driven rotation and adjustable speed control, ensuring controlled and stable coil feeding. AVAILABLE MODELS 750 kg Mechanical Decoiler 2.500 kg Mechanical Decoiler 4.000 kg Mechanical Decoiler TECHNICAL RANGE Coil Weight Capacity: 750 kg – 4000 kg Coil Width Range: 20 mm – 1300 mm (depending on model) Coil Outer Diameter: 700 – 1300 mm Coil Inner Diameter: 300 – 630 mm / 480 – 600 mm (model dependent) ENGINEERING FEATURES Mechanical expansion mandrel system Motor-driven rotation system Frequency inverter controlled speed adjustment Kledeyzd I Ispfx Aayjr Belt and pulley transmission system Brake-controlled mandrel system Right-to-left / left-to-right operation capability OPTIONAL FEATURES Pneumatic upper arm (snubber arm) system Coil hold-down system Custom mandrel configurations Integration with press feeding systems OPERATIONAL ADVANTAGES Compact and space-saving design Cost-effective solution for light and medium coils Easy installation and operation Low maintenance requirements Flexible configuration options APPLICATION AREAS Press feeding lines Stamping and metal forming Sheet metal processing Roll forming lines General industrial applications REFERENCE & EXPERIENCE Images included in this listing show reference installations of similar mechanical decoilers successfully manufactured and commissioned in different countries. These references demonstrate our proven engineering capability and international project experience. Additional references and technical details can be provided upon request.

Condition: good (used), Year of construction: 2006, Approx. 100 bays of heavy-duty shelving racks, Gemac; this system does not require cross braces. Frame heights: 2.48m and 2.31m. Shelves: 1.20m x 1.30m, 130kg per level – used – Price per bay ex location: only €95 (net), dismantled, packed, and loaded! Price for minimum 100 bays: Per bay ex location: only €85 (net), dismantled, packed, and loaded! Manufacturer: Gemac Model: likely Normaflex Year of manufacture: 2006 Frame height: approx. 2.48m Bay depth: 1.20m Bay width: approx. 1.31m (including the frame, two bays are approx. 2.74m wide) Shelves: Ksdpfx Aajy D Tm Soyelr Load capacity per shelf: 120kg Load capacity per bay: 850kg Shelves per bay: 6, including a top shelf that can also be used for storage The 6 shelf levels consist of 3 large continuous shelves and 3 levels made of narrower shelves (that together also create a large surface) Shelf anti-lift locks must be re-purchased new if required by the buyer – normally they are not necessary (plastic locks are usually damaged during dismantling – but there are also new metal types available) Feet are plugged in and then screwed once The upper shelf is bolted to the next frame or shelf with a connector plate (everything else is plugged), so no cross braces or similar are required due to this and the three large shelves with stiffeners Available: approx. 100 bays immediately, for installation in 25 x 4-bay sections Condition: good – very good Location: D-77749 Hohberg

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 3,860 mm, total width: 1,200 mm, total height: 3,000 mm, overall weight: 5,500 kg, warranty duration: 12 months, blade width: 75 mm, power: 60 kW (81.58 HP), rotor length: 770 mm, MIZAR DSH Series - Double Shaft Shredder for Metal, E-Waste & Plastics High-Torque Performance for Demanding Industrial Applications Engineered for continuous operation, the MIZAR DSH Series delivers powerful, low-speed, high-torque shredding performance for the toughest materials. Designed for reliability, built for industrial scale. CORE ADVANTAGES • Drive System: Independent dual shafts powered by heavy-duty planetary gearboxes. High torque at low RPM ensures efficient size reduction with minimized wear. • Industrial-Grade Components: Siemens/WEG motors, SKF/FAG bearings, Schneider or ABB electrical systems. Globally trusted brands for long-term reliability. • Blade Technology: Custom-engineered, high-alloy wear-resistant steel blades [Örn: HARDOX or equivalent]. Optimized cutting geometry for aggressive intake and consistent output size. • Structural Strength: Reinforced steel frame construction for vibration resistance and extended service life. Fully CE-certified for international compliance. APPLICATION FIELDS • Scrap Metal: Aluminum profiles, radiators, light scrap, sheet metal. • E-Waste: PCBs, motherboards, hard drives, mixed WEEE materials. • Cable Recycling: Copper and aluminum cables, wiring harnesses. • Plastic Waste: HDPE pipes, industrial drums, PET, big bags. • Wood & Alternative Fuels: Pallets, MDF waste, pre-shredding for RDF and SRF production lines. MODEL RANGE & TECHNICAL HIGHLIGHTS (Please ask for the exact configuration based on your material) • DSH S1: Compact footprint. Ideal for medium-capacity operations. Kjdpjgwhb Iofx Aayjlr • DSH M1: High-performance all-round solution for diverse material streams. • DSH L1: Heavy-duty industrial powerhouse for large-scale recycling plants. Why Mizar DSH? • High torque without high energy consumption • Modular design for seamless integration into complete recycling lines • Easy maintenance access and quick blade-change system • Built for 24/7 industrial environments Need a tailored shredding solution? Contact us for a customized quotation, technical drawings, or send your material for a performance test. Mizar Recycling Machinery

Condition: not inspected (used), functionality: unexamined, total length: 8,000 mm, total height: 2,000 mm, total width: 1,200 mm, overall weight: 400 kg, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection between 23/06/2026 and 26/06/2026! TECHNICAL DETAILS Shelf dimensions: 1,800 x 1,100 mm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 8,000 x 1,200 x 2,000 mm Weight: 400 kg External reference: 9 Kodpfxsy D Sc Ee Aayslr

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, controller model: E555 Touchscreen, overall weight: 2,300 kg, cutting length (max.): 6,000 mm, saw blade diameter: 550 mm, rotational speed (max.): 2,800 rpm, TECHNICAL DETAILS Max. cutting length: 6000 mm Saw blade diameter: 550 mm Saw blade speed: 2800 rpm MACHINE DETAILS Control: E555 touchscreen Ksdpfxey Egahs Aayjlr Compressed air supply: 7 bar Dimensions & Weight Dimensions (L x W x H): 7500 x 1500 x 2000 mm Weight: 2,300 kg

Condition: used, Year of construction: 1980, spindle diameter 135 mm x-travel 950 mm distance between columns 1100 mm y-travel 700 mm cross rail adjustment - vertical 780 mm quill travel 300 mm max. distance between table and spindle-nose 1000 mm table surface area 1100x842 mm table load 1500 kg speeds 40-2000 U/min adjustment speed 5-1500 mm/min electrics - voltage/frequency 380/50 V/Hz total power requirement 8 kW Klsdsy Ehwhjpfx Aayer weight of the machine ca. 9,5 t dimensions of the machine ca. 3,3x2,34x2,8 m total power requirement 8 kW weight of the machine ca. 9,5 t dimensions of the machine ca. 3,3x2,34x2,8 m

Year of construction: 2026, condition: new, Bosporas Machinery is a manufacturer of coil processing lines, roll forming lines and press feeding systems, delivering high-performance and customized industrial solutions worldwide. Our compact coil slitting lines are designed for efficient and precise slitting of light and medium gauge materials. These systems offer flexible configurations ranging from entry-level compact lines to more advanced solutions with integrated straightening units. The lines are engineered to provide stable operation, consistent slit quality and optimized production efficiency while maintaining a compact footprint and cost-effective investment level. AVAILABLE CONFIGURATIONS 1 mm | 1300 mm | 4 Ton | Pitless Compact Slitting Line 3 mm | 600 mm | 6 Ton | Compact Slitting Line (Pinch Roller Feeding) Kjdsyzbm Uepfx Aayjlr 3 mm | 600 mm | 6 Ton | Slitting Line with Straightener Unit 3 mm | 1000 mm | 6 Ton | Compact Slitting Line (Pinch Roller Feeding) SYSTEM CONFIGURATION OPTIONS Depending on production requirements, the line can be supplied with: Straightener unit for improved material flatness and feeding stability Pinch roller feeding system for compact and cost-effective operation Single pit or pitless design based on layout requirements TECHNICAL RANGE Material Thickness: 0.3 – 3 mm Coil Width: up to 1300 mm Coil Weight: 4 – 6 Ton Slitting Accuracy: ±0.1 mm MAIN LINE COMPONENTS Hydraulic decoiler (expanding mandrel system) Coil loading system (optional) Infeed system with pinch rollers or straightener unit Slitting head with precision knife adjustment Scrap winder system Tension unit and separator system Recoiler with hydraulic mandrel Electrical control and automation system (HMI controlled) ENGINEERING FEATURES High precision slitting performance Adjustable slitting knives with fine positioning system Robust gearbox-driven slitting head Stable tension control system Compact and modular machine design Bidirectional operation capability OPERATIONAL ADVANTAGES Flexible configurations for different budgets and needs Compact design for limited factory space Stable and continuous production Easy operation and maintenance Short lead time compared to European manufacturers APPLICATION AREAS Steel service centers Sheet metal processing companies HVAC and construction materials Automotive sub-suppliers General metal processing industries

Year of construction: 2026, condition: new, High precision sheet metal leveler system with servo-driven technology and customizable thickness and width configurations. Bosporas Machinery is a manufacturer of coil processing lines, roll forming lines and press feeding systems, delivering high-performance and customized industrial solutions worldwide. Our precision leveler machines are designed to eliminate internal stresses and ensure perfect flatness in sheet metal processing applications. Equipped with advanced servo motor technology, the system delivers synchronized, stable and repeatable leveling performance for demanding industrial operations. The machine is engineered as a high-performance solution combining precision leveling, material stability and continuous production efficiency in a compact and robust structure. The system is equipped with multiple precision straightening rollers supported by backup rollers, ensuring superior flatness correction and internal stress relief across the entire material width. This advanced structure enables consistent, high-accuracy leveling performance even in demanding applications. THICKNESS RANGE (FLEXIBLE CONFIGURATION) The system can be manufactured in different configurations depending on application requirements: 0.5 – 2.5 mm 0.4 – 8 mm 1.5 – 10 mm 2 – 15 mm 10 – 20 mm Custom production is available according to material type, thickness and project requirements. ENGINEERING & DESIGN High precision straightening performance Servo motor driven system for stable and accurate operation Advanced cassette-type structure for easy maintenance and fast adjustment Heavy-duty gear transmission system Bidirectional operation capability (left-right / right-left) Klsdpfeyzbmzox Aayer PERFORMANCE High flatness accuracy Continuous and stable operation Reduced internal stress in material Optimized for industrial production environments SYSTEM COMPONENTS Precision leveler unit Cassette structure Gear transmission system Electrical and automation system Entry / exit conveyor (optional) OPERATIONAL ADVANTAGES Excellent flatness and surface quality High repeatability and process stability Reduced downstream processing problems Flexible design for different industries Short lead time compared to European manufacturers APPLICATION AREAS Steel service centers Cut to length lines Coil processing lines Automotive and metal industries Sheet metal production OPTIONAL EQUIPMENT Entry / exit conveyor systems Automation and control upgrades Integration with coil processing lines (especially cut-to-length lines) Custom engineering solutions

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,813 kg, axle configuration: 3 axles, first registration: 12/2020, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2020, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SCB Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Klodoyx Auzopfx Aaysr Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels (6+1) tyres - 385/65R22.5 (11.75x22.5) Variable height double deck with 22 ALU beams Loading capacity 33 / 66 euro paletts Length/width/heigth - 1341cm/246cm/265cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 682 kg 3 axles Pallet rack for 36 Euro pallets

Year of construction: 1999, condition: used, Angle display: digital Kjdpoy A Hikjfx Aayolr Length stop flap measurement display: digital

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,927 kg, axle configuration: 3 axles, first registration: 03/2020, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2020, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SCB Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Kledpoyuf Hkjfx Aaysr Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels (6+1) tyres - 385/65R22.5 (11.75x22.5) Variable height double deck with 22 ALU beams Loading capacity 33 / 66 euro paletts Length/width/heigth - 1341cm/246cm/265cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 710 kg 3 axles Pallet rack for 36 Euro pallets

Condition: repair required (used), Year of construction: 2022, functionality: limited functionality, machine/vehicle number: 20082500, number of ink cartridges: 6, number of print heads: 6, number of feeding trays: 2, counter reading (color): 85,723, year of last overhaul: 2024, Equipment: raster image processor, type plate available, Good morning Kljdpfeyi Ak Aox Aaysr We have an AEOON COMPACT SERIES DTG printer for sale. The machine was purchased and installed in June 2022 and operated until mid-2025. During this time, it was regularly serviced by the distributor. The machine features two separate printing stations, which makes work much easier and faster. The AEOON requires a printhead replacement. We will assist with packaging and transport.