Used Stork Jansen&Sutor. Stork Jansen&Sutor. Premixer 15,000 L/H Mixer (1969) for sale (85,027)

Condition: excellent (used), Year of construction: 2020, Ref:11141. 2020 Horizon Stitchliner Mark III L Iiedpszyu Ugefx Agysh Stitchliner with A4 Landscape capability. Features: Simple, fast set-ups by non-specialist finishing operators Works from flat-sheet 4-page sections No need to pre-fold Integrated automatic set-up 3-knife trimmer High quality books with sharp spine definition Comprising: 24 station (1 x VAC L600Ha + 3 x VAC L600Hm) 6 station tower suction collators with touch-screen control, double- and miss-sheet control. Accumulator/Folder ACF-40 with double gate-fold to; SPF-40 Saddle stitcher with 2 x Hohner 43/6S stitching heads to; HTS-40 Three knife trimmer Specification: Max sheet size: (Portrait: 356 × 508mm) (Landscape: 267 × 610mm) Min sheet size: 140 × 194mm Finished booklet size (approx): Max: 352 × 303mm Min: 120 × 85mm Typical formats: A3, A4, A5, B4, B5 Paper weight: Uncoated: 52–350 gsm / Coated: 73–350gsm Max stitch thickness: 5mm Equivalent to ~10mm booklet thickness (~50 sheets of 80gsm) Loop stitching: Max ~3mm stitch thickness Wire size: Typically 0.4 – 0.6mm (No.24–27 range) Trim width: 2 – 25.4mm Max trim thickness: 10mm Max speed: Up to 6,000 booklets/hour A4 landscape: 5,300/hour

Condition: excellent (used), Year of construction: 2020, Ref:11142 . 2020 Horizon Stitchliner Mark III L Stitchliner with A4 Landscape capability. Features: Simple, fast set-ups by non-specialist finishing operators Works from flat-sheet 4-page sections No need to pre-fold Integrated automatic set-up 3-knife trimmer Isdpfx Ajzyu Uyegyeih High quality books with sharp spine definition Comprising: 24 station (1 x VAC L600Ha + 3 x VAC L600Hm) 6 station tower suction collators with touch-screen control, double- and miss-sheet control. Accumulator/Folder ACF-40 with double gate-fold to; SPF-40 Saddle stitcher with 2 x Hohner 43/6S stitching heads to; HTS-40 Three knife trimmer Specification:

Condition: used, functionality: fully functional, power: 35.3 kW (47.99 HP), Highly efficient 4-pipe heat pump with R290 (propane) This state-of-the-art 4-pipe heat pump has been specifically developed for the flexible, simultaneous or independent provision of chilled and hot water. Thanks to cutting-edge inverter technology and the environmentally friendly refrigerant R290, the unit offers maximum energy efficiency with a minimal environmental footprint. The device features robust enclosure panels and integrated sound insulation in the compressor compartment to ensure extremely quiet operation. Equipped with a factory-integrated hydraulic kit (1 pump) and a 100-liter buffer tank, the unit is ready for immediate operation and can be seamlessly integrated into complex building systems. Key technical data at a glance: • Cooling capacity: 14.1 – 35.3 kW (modulating) • Heating capacity: 19.2 – 39.5 kW (modulating) • Refrigerant: R290 (propane – future-proof and GWP-compliant) • Compressor configuration: 1 highly efficient, semi-hermetic reciprocating compressor / 1 refrigeration circuit • System type: 4-pipe unit Iiedpfx Aoz Ix D Segyoh Intelligent operating modes for maximum energy savings • Flexible 4-pipe logic system: Complete hydraulic separation of air conditioning and domestic hot water (DHW). The control system regulates the pumps fully automatically as needed and allows for exclusive DHW activation via a digital input. • Highly efficient combined cycle (simultaneous operation): • In cooling mode: When DHW is required, the system utilizes complete heat recovery. It provides free hot water while the fan stops. • In heating mode: The system prioritizes DHW production and automatically switches back to room heating once the setpoint is reached. • On-demand individual operation: Efficient single-mode operation for cooling, heating, or hot water only, with precise inverter control to avoid partial load losses.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, clamping force: 1,500 kN, screw diameter: 50 mm, clearance between the columns: 520 mm, displacement volume: 392 cm³, injection pressure: 2,000 bar, injection weight: 359 g, mold height (min.): 250 mm, plate length: 695 mm, plate width: 695 mm, total length: 5,205 mm, total width: 1,670 mm, total height: 2,200 mm, overall weight: 6,500 kg, Clamping force: 150 t Year of manufacture: 2012 Injection shot weight: 359 g Injection unit 800 Screw diameter: 50 mm Specific injection pressure: 2000 bar Iiodpfxsz Iz Exs Agysh Injection volume: 392 cm³ Injection shot weight: 359 g Screw L/D ratio: 24 Tool closing unit 1500 Clamping force: 150 t Tool plate dimensions: 695 x 695 mm Distance between columns: 520 x 520 mm Tool height: 250...650 mm Opening stroke: 400 mm Maximum plate distance: 650...1050 mm Weight: 6500 kg Dimensions (m) L x W x H: 5.25 x 1.67 x 2.20 m Control system: Selogica Equipment: Hydraulic core 12-zone hot runner system Accumulator Frequency converter Hidrive drive 4 x pneumatic valve

Condition: used, mileage: 19,578 km, power: 92 kW (125.09 HP), first registration: 03/1988, fuel type: diesel, overall weight: 9,700 kg, axle configuration: 2 axles, color: red, gearing type: mechanical, total width: 2,500 mm, total height: 3,000 mm, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle today, subject to prior sale, errors, and omissions: IFA W 50L LF fire engine with double cab, pump, and tank First registration: March 10, 1988 19,578 km (original) Engine: 6,560 cc 92 kW / 125 hp Permissible gross vehicle weight: 9,700 kg, unladen weight: 81.50 kg, payload: 1,550 kg Overall length: 7,700 mm x overall width: 2,500 mm x overall height: 3,000 mm Double cab, 2 seats in front, 7 in the back 2 rotating beacons in front, 1 on the passenger side in the back + 1 flashing light on the left and right in the back, on top Iisdpfxoz Rktlj Agyjh Towing eye in front Power connection/supply connection on the passenger side in front 2 hose holder housings on top, walkable roof rack 2 water connections on the driver's side and passenger side in the back, 1 in the back Water tank under the vehicle Hose reel Complete pump unit Trailer hitch Hose reel holder in the back Work spotlights in the back, on top 2 seats in front, 10 seats in the back 5-speed manual transmission Manual roof Auxiliary heater Siren Good overall condition Price: €5,500.00 (VAT not shown) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties is the local court of Ludwigslust for disputes up to €10,000, and the regional court of Schwerin for disputes exceeding this amount. Subject to errors, omissions, and prior sale.

Condition: used, Year of construction: 2019, operating hours: 808 h, Wacker Neuson ET16 mini excavator, manufactured in 2019, with only 808 operating hours! ---- * Manufacturer: Wacker Neuson * Model: ET16 * Year of manufacture: 2019 * Operating hours: approx. 808 * Operating weight: approx. 1,715 kg * Includes 2 buckets * Fully enclosed cabin * Extendable undercarriage * Very good rubber tracks! * Video available upon request * Price: €12,900, net + 19% VAT ---- For further questions, please call: Erik Kortum: WhatsApp ?All information without guarantee. Errors and prior sale are reserved.? Isdjz Rkwwspfx Agysih

Condition: used, Year of construction: 2013, x-travel 700 mm y-travel 700 mm z-travel 700 mm control 840 D sl Siemens Max. Speed Subspindle 10.000 min/-1 power capacity - main spindel 42 kW max. Torque 236 Nm tool taper HSK-A 63 DIN 69893 Number of pallet-stations 10 pos. size of pallet 500 x 500 mm max. workpiece weight 600 kg Iodpfx Agjz I Dy Seyoih max. workpiecediameter 800 mm max. workpiece height 1.000 mm number of toolpositions 180 pos. tool taper HSK-A63 max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool length 550 mm max. tool weight 12,0 kg change-time tool to tool 0,9 sec change-time chip to chip 2,8 sec rapid traverse ( X / Y / Z ) 60 m/min feed speeds max. 60.000 mm/min Accelaration x/y/z: 6 / 6 / 5 m/s² feed power 10 kN total power requirement 67 kW weight of the machine ca. 9,7 t dimensions of the machine ca. 7,5 x 5,0 x 2,8 m CNC - Machiningcenter Horizontal DECKEL MAHO - DMC 65 H duoBLOCK

Condition: used, Year of construction: 2023, operating hours: 444 h, load capacity: 2,500 kg, fuel type: diesel, gearing type: mechanical, Serviced according to manufacturer’s specifications. ----Moffett piggyback forklift M4 25.3 NX, year of manufacture 07/2023, operating hours 444 h, lifting and load capacity 2,500 kg at LSP 600 mm, all-wheel drive with switchable differential lock, engine: Kubota D1305 18.4 kW/25 hp with emission stage 5, lifting height 3,040 mm, 65 mm side shift per side via lifting mast, fork carriage width 1,300 mm, fork dimensions: FEM 3A 1800x120x50, driver’s seat suspended and foldable. Detailed specifications available upon request! ---- ----For sale to commercial businesses only! No guarantee for the accuracy of the information! Subject to prior sale! Our general terms and conditions apply exclusively! We would be happy to provide you with a leasing or financing offer. Iodpfx Agjz E Tdhoyeih

Condition: used, Year of construction: 2019, operating hours: 1,092 h, Wacker Neuson ET16 mini excavator, manufactured in 2019, with only 1,092 operating hours! ---- * Manufacturer: Wacker Neuson * Model: ET16 * Year of manufacture: 2019 * Recorded operating hours: approx. 1,092 * Last service at approx. 999 hours. * Operating weight: approx. 1,715 kg * Includes 3 buckets * Full cab * Extendable undercarriage Iedpfx Agez E T U Heyoih * Video available upon request * Price: 13,900 euros, net + 19% VAT ---- For further questions, please call: Erik Kortum: WhatsApp ?All information is without guarantee, errors and prior sale excepted.?

Condition: used, maximum load weight: 37,100 kg, overall weight: 45,000 kg, axle configuration: 3 axles, first registration: 09/2008, total length: 12,290 mm, total width: 2,550 mm, total height: 2,100 mm, Year of construction: 2008, Additional information: * Type | First axle: Continental R * Tire size | First axle: 445/45 R19.5 * Tire tread depth inner left | First axle: 30% * Tire tread depth inner right | First axle: 30% * Maximum axle load | First axle: 9000 kg * Type | Second axle: Continental R * Type | Third axle: Continental R * Tire size | Second axle: 445/45 R19.5 * Tire size | Third axle: 445/45 R19.5 * Tire tread depth inner left | Second axle: 30% * Tire tread depth inner left | Third axle: 30% * Tire tread depth inner right | Second axle: 30% * Tire tread depth inner right | Third axle: 30% * Maximum axle load | Second axle: 9000 kg * Maximum axle load | Third axle: 9000 kg * Position | First axle: Rear * Brand | First axle: Other * Brake type | First axle: Disc brakes * Suspension | First axle: Air suspension * Lifting axle | First axle: Yes * Position | Second axle: Rear * Position | Third axle: Rear * Brand | Second axle: Other * Brand | Third axle: Other * Brake type | Second axle: Disc brakes * Brake type | Third axle: Disc brakes * Suspension | Second axle: Air suspension * Suspension | Third axle: Air suspension Additional features: * Central lubrication * Homepage * Lifting axle * SemCollection * Steering axle Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please inquire about the costs and procedures for your respective country in advance. Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Iiedpfsz E Ubzex Agyjh Subject to changes, prior sale and errors. The stated prices exclude BPM and are only valid for export.

Condition: ready for operation (used), Sensor cable/interface cable, length 6.3 m, with 2 Honda MR-20L connectors, 20-pin, for Fanuc. Used, with normal signs of wear, 100% functional. Scope of delivery as shown in the photos. Iijdpfx Agjz Dnyzeyjh

Condition: ready for operation (used), TACHII 1990 Sensor cable/interface cable, length 3.6 m, with 2 Honda MR-20L 20-pin connectors for Fanuc, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Iiedpfx Agjz Dnzrsysh

Condition: ready for operation (used), TACHII 1990 Sensor cable/interface cable, length 6.8 m, with 2 Honda MR-20L 20-pin connectors for Fanuc, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Iodjz Dnz Sepfx Agyeih

Condition: used, mileage: 19,604 km, power: 129 kW (175.39 HP), first registration: 11/1993, overall weight: 7,490 kg, fuel type: diesel, color: blue, gearing type: mechanical, loading space width: 2,400 mm, loading space length: 3,000 mm, loading space height: 1,600 mm, total length: 6,850 mm, total width: 2,470 mm, total height: 2,750 mm, Equipment: ABS, all wheel drive, parking heater, Clean MB 917 4x4 box van from the THW (Federal Agency for Technical Relief) with a long axle ratio. Maximum speed = 97 km/h; the 917 accelerates quickly, shifts well and can be steered precisely. Equipped with ABS, auxiliary heater, large double cab with 9 seats. The driver's seat is air-suspended, all seats have automatic seatbelts and headrests. Derated to a gross vehicle weight (GVW) of 7.5t, unladen weight approximately 6.0t +++ with a fresh TÜV (technical inspection) and H-certificate (historic vehicle approval). Inspection carried out with a check of all fluid levels, Iiedpfx Ajz Edr Aogyjh clutch fluid and the air dryer cartridge replaced. Chassis lubricated, both starter batteries replaced (NATO standard). Front headliner in the cab replaced. The rear cabin doors and side panels were professionally refurbished and repainted in our in-house paint shop. The outer chassis parts and the rims were also refurbished and repainted with a multi-layer paint system. Box dimensions, exterior: 3000 x 2470 x 1650 mm (L x W x H) Wheelbase 3650 mm This 917 is in really good condition and is ready to drive away immediately. Engine, transmission, and axles are dry. The towing capacity is 7.5t, with a GVW of 9.5t = 11.5t with a continuous braking system. With an overrun brake, 3.5t, unbraked 1.5t (BW trailer). +++ Errors, changes and prior sale reserved.

Condition: excellent (used), functionality: fully functional, power: 55.4 kW (75.32 HP), fuel type: diesel, color: green, overall weight: 6,325 kg, Year of construction: 2020, operating hours: 570 h, Equipment: air conditioning, cabin, Hamm H 7i VIO Oscillating Roller, CompactLine Year of manufacture: 2020 Iedpfsz Dhrwex Agysih 570 operating hours 6,325 kg 55.4 kW Kubota engine Air conditioning

Condition: used, mileage: 2,55,811 km, power: 170 kW (231.14 HP), first registration: 11/2021, fuel type: diesel, overall weight: 16,000 kg, next inspection (TÜV): 02/2027, color: blue, gearing type: automatic, emission class: euro6, loading space volume: 44 m³, loading space length: 7,450 mm, loading space width: 2,480 mm, loading space height: 2,400 mm, Year of construction: 2021, Equipment: ABS, air conditioning, electronic stability program (ESP), tail-lift, ATEGO 1523 L refrigerated box body, 7.45 m, with doors + folding tail lift, 1.5 tons. * CARRIER Supra 850 (diesel engine) and standby cooling 380 V ELECTRIC * Permissible total weight 16,000 kg = payload approx. 7,340 kg * Vehicle number for customer inquiries: 4828 * Active Brake Assist Iedpfx Agez Ntzceyjih * Air conditioning * Engine version Euro VI, D * Lane keeping assist * Environmental badge (green) * Tail lift * High Performance Engine Brake * Light sensor * Air suspension, rear axle * Rain sensor * Maintained according to service schedule * Stability control assistant (ESP) * Electronic braking system with ABS and ASR * Driver's comfort seat, standard * Power windows, electric, on both sides * Transmission G 90-6/6.70-0.73 * Mercedes PowerShift 3 * Locking system, with central locking * Sun visor, exterior, transparent * Cruise control * Storage compartment, high, on engine tunnel * AdBlue tank 35 l * Roof hatch/ventilation flap, roof * Weight variant 16.0 t (6.1/10.5) * Main mirror, electric, driver's side * Heater, electronic compressed air supply unit * Fuel preheater * Plastic tank 180 l, left * Engine OM934, R4, 5.1 l, 170 kW (231 hp), 900 Nm * Wheelbase 5360 mm * Tires tubeless, 305/70 R 19.5 front axle * Reversing warning * S-cab ClassicSpace, 2.30 m, tunnel * Stabilizer, under frame, rear axle * Front spring, 6.1 t, parabolic * Preparation for toll collection * Tachograph digital, 2nd generation, ADR No liability for printing and typographical errors Sales only to commercial customers Subject to errors and prior sale* Changes, prior sale and errors expressly reserved. The description serves to identify the vehicle and does not constitute a guarantee in the legal sense. The description according to the purchase contract is decisive. * TOP SERVICE + QUALITY * We will gladly provide you with a LEASING-FINANCING-RENT-TO-OWN offer Guarantee insurance possible upon request with the insurance company * TÜV / UVV LBW / Tachograph inspection and installation of OBU device by our partners on site * Customs license plates for 30 days All customs documents for export are possible, but must be requested individually * TOLL for Toll-Collect can be booked in-house * Free transfer from Stuttgart Airport or Metzingen (Württemberg) train station * TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WhatsApp number * ---- Visit us on our website at * constantly over 200 vehicles in stock

Condition: new, Year of construction: 2026, Airflow capacity 11,300 m³/h Motor power 11 kW (15 HP), 3000 rpm Air velocity 40 m/s Filter dimensions Ø160 x 940 mm Number of filters 60 pcs Filtration area 30 m² Chip collection 2x 1250-liter big-bag (total: 2500 liters) Inlet diameter Ø355 mm Dimensions 1200 x 3310 x 3560 mm Weight 820 kg Operating temperature -20°C to 40°C Iiedpfez I Sc Ujx Agysh

Condition: new, functionality: fully functional, fuel type: electric, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE COMPACT series Stationary Concrete Batching Plants provide satisfaction of all levels need with practical and effective solutions. Stationary concrete batching plants can easily and efficiently reach high capacity production of homogeneous concrete mixture. COMPACT series have easy operating system and lowest investment costs. In addition, the plant provides the use of enterprise resources accurately, so that gaining time-saving will transform to more earnings. . TECHNICAL SPECIFICATIONS: Model: COMPACT 110 Production capacity: 100 m3 Mixer type: Twinshaft – 2 m3 Aggragate bunker: 4x20 m3 Cement weighing: 900 kg Additives weighing: 40 kg Water weighing: 700 lt Cement silo is optional. COMPACT 110 consist of: • Aggregate Storage Hopper • Aggregate Weighing Hopper • Aggregate Transfer Conveyor or Bucket System • Twinshaft Mixer Iodez Ng U Njpfx Agyeih • Mixer Chassis, Walking Platforms, Ladder • Water Weighing Hopper • Cement Weighing Hopper • Admixture Weighing Hopper • Air Compressor • Cement Screw Conveyor • Bolted Cement Silo • Top Filter, Safety Valve and Accessories • Control Cabinnet • PC and Automation System • Control and Power Panel FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: reconditioned (used), functionality: fully functional, empty load weight: 119 kg, input voltage: 400 V, fuel: electricity, warranty duration: 6 months, temperature: 85 °C, KARCHER HDS-E 8/16-4M 12kW HOT WATER PRESSURE WASHER The device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. The machine has only 299 hours of operation. Iisdpfx Agezrxh Isyoh A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 160 bar and 760 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Fully electric water heating allows operation in areas where exhaust emissions are prohibited. Each device we offer is individually photographed; you're buying exactly what you see. TECHNICAL DATA: Power supply voltage [V]: 400 ~3 phase Discharge capacity [l/h]: 760 Operating pressure [bar]: 160 Max. Heating temperature [°C]: 85 Heater power [kW]: 12 Connection power [kW]: 17.5 Cleaning agent tank [l]: 10 + 20 Hose length [m]: 10 Weight [kg]: 119 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Two built-in chemical tanks allow for dosing of cleaning fluid directly through the machine Very clear and intuitive control panel Simple design and easy access to individual components under the housing make the machine User-friendly and easy to service The RM110 water softener tank prevents corrosion and scale buildup inside the heating coil and other pipes.

Year of construction: 1955, condition: used, Union model L.2.A.S. 5" x 24" Lathe. Backgeared and Screwcutting lathe with a detachable gap bed. A practical and characterful old lathe that works well and has plenty of capacity in a compact size. From the family agricultural engineering workshop, which is now sold, hence the lathe is for sale. 3-phase 415v, so ideal for conversion to variable-speed drive from a 1-phase to 3-phase inverter (not included). 3-jaw chuck, faceplate and a collection of changewheels for screwcutting. It works. I can send a video of it running. Buyer to arrange and fund the shipment. Foklifting onto your van / truck may be possible with the agreement of the new property owner. Please contact me if you would like to arrange this. Location is near Kings Lynn, Norfolk, UK. If you have any questions or need more information, feel free to send us a message or give us a call. Iisdpfx Aoz Hifdsgyoh

Condition: used, Year of construction: 2018, overall weight: 230 kg, load capacity: 5 kg, terms of delivery: FCA Pegnitz Iiodpfx Ajxgu S Ssgyoh delivery time: on request terms of payment: 100% prior to delivery

Condition: new, empty load weight: 2,980 kg, maximum load weight: 7,520 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 6,200 mm, loading space width: 2,480 mm, suspension: air, tire size: 235/75 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading height approx. 860 mm, vehicle interior width approx. 2,480 mm, front panel made of galvanized steel, 600 mm aluminum sideboards, foldable and removable, removable posts, 40 mm wooden floor, 3 post pockets in the center for plug-in posts 80 x 80, 6 tie-down points, outer frame with tie-down eyes, reinforced gearbox support with load and fast gear, contour marking and side impact protection, mudguards and spray suppression, rear, surcharge for front panel grille 1,600 mm high (perforated sheet metal), price: 1,400 euros, surcharge for aluminum ramps, load capacity per pair 8 tons, and 2 x folding supports at the rear, price: 1,900 euros, -- printing errors, errors and changes excepted, sample images --, more data at: !, More Details: ! Iijdpfxjz Sygwj Agysh

Condition: used, machine/vehicle number: 258, mileage: 5,40,250 km, power: 338 kW (459.55 HP), first registration: 08/2017, fuel type: diesel, empty load weight: 7,908 kg, maximum load weight: 10,092 kg, overall weight: 18,000 kg, tire size: 315/80 r22,5, axle configuration: 4x4, wheelbase: 3,600 mm, brakes: other, color: green, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cruise control, differential lock, hydraulics, low noise, navigation system, onboard computer, parking heater, traction control, Urea tank (AdBlue) Displacement 12,419 ccm Tipping hydraulics EBS Light alloy rims Pritarder Automatic air conditioning Sun visor Cab air suspension Rotating beacons 1 couch Alcoa alloy wheels Exhaust upwards cool box Euro 6 C Iisdpfxjnl Ivpe Agysh Errors excepted

Condition: good (used), Riello RLS50 oil+gas burner 581kw ca.15kg/h Iodjpiqiaspfx Agysih

Condition: good (used), Weishaupt oil burner L9T-320kg/h Iisdpfjpiqtcox Agyoh