Used Transzformátor Transformer for sale (741)

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 13201, type of input current: three-phase, overall weight: 5,150 kg, input voltage: 3,000 V, input frequency: 50 Hz, nominal power (apparent): 2,500 kVA, secondary voltage: 400 V, protection type (IP code): IP00, input current: 481 A, type of output current: three-phase, output voltage: 400 V, Equipment: type plate available, 3-phase transformer (dry) from primary 3000V to 400 V sekundär with a capacity of 2500 KVA Hodpfx Abox Sd D Dehonp

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: K731711, type of input current: three-phase, overall weight: 2,140 kg, input voltage: 10,000 V, input frequency: 50 Hz, nominal power (apparent): 630 kVA, secondary voltage: 400 V, protection type (IP code): IP00, input current: 36 A, type of output current: three-phase, output voltage: 400 V, Equipment: type plate available, 3-phase transformer (dry) from primary 10 KV (+-5%) to secondary 400V with power 630 KVA Hedpfx Abox Sphbshjnp

Condition: used, Year of construction: 1986, functionality: fully functional, machine/vehicle number: K725533, type of input current: three-phase, overall weight: 2,040 kg, input voltage: 10,000 V, input frequency: 50 Hz, nominal power (apparent): 630 kVA, secondary voltage: 400 V, protection type (IP code): IP00, input current: 36 A, type of output current: three-phase, output voltage: 400 V, Equipment: type plate available, 3-phase transformer (dry) from primary 10 KV (± 5 %) to secondary 400 V with a capacity of 630 KVA Hedpjx Svxmefx Abhjnp

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 399.069.101, type of input current: three-phase, overall weight: 2,800 kg, input voltage: 10,000 V, input frequency: 50 Hz, nominal power (apparent): 800 kVA, secondary voltage: 400 V, protection type (IP code): IP55, input current: 44 A, type of output current: three-phase, output voltage: 400 V, Equipment: type plate available, Iron case 3-phase transformer (dry) from primary 10 KV (± 5%) to 400V with metal casing with capacity 800 KVA. Hnjdpfxox Sdr Ie Abhep

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: K734175, type of input current: three-phase, overall weight: 7,430 kg, input voltage: 10,000 V, input frequency: 50 Hz, nominal power (apparent): 3,000 kVA, secondary voltage: 500 V, protection type (IP code): IP00, input current: 173 A, type of output current: three-phase, output voltage: 500 V, Equipment: type plate available, 3-phase transformer (dry) from primary 10 KV (± 5%) to secondary 500V with a capacity of 3000 KVA Hjdpox Sv Egjfx Abhonp

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, nominal power (apparent): 1,600 kVA, output voltage: 20,000 V, Equipment: type plate available, One transformer station in container, transformer + cell. Power: 1600 kVA Voltage: 400-20000 V Year of manufacture: 2007-2009 Hodpfxjyvgyve Abhonp

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 786630-01, type of input current: three-phase, overall weight: 4,020 kg, input frequency: 50 Hz, Equipment: documentation/manual, For a high level of safety and exceptional environmental friendliness, there’s nothing to beat a dry-type cast resin transformer. The epoxy resin insulation used in this kind of transformer means no oil is used, greatly reducing the risk of fire and improving recyclability, all without loss of performance compared to other transformer types. Dry-type cast resin transformers Hsdexywk Depfx Abhonp are therefore ideal for critical applications and high-traffic areas. Even among dry-type cast resin transformers, Trihal from Schneider Electric stands out due to its outstanding performance and unrivalled certifications.

Condition: new, Manufacturer: SBA TrafoTech GmbH Type: DS-UL-G140 Device type: Three-phase autotransformer Frequency: 50–60 Hz Protection class: I Degree of protection: IP23 Insulation class: B/F Maximum ambient temperature: 40 °C Hnsdpozcgy Ijfx Abhep Design: UL-compliant transformer series DS-UL-G140

Condition: new, functionality: fully functional, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE COMPACT series Stationary Concrete Batching Plants provide satisfaction of all levels need with practical and effective solutions. Stationary concrete batching plants can easily and efficiently reach high capacity production of homogeneous concrete mixture. COMPACT series have easy operating system and lowest investment costs. In addition, the plant provides the use of enterprise resources accurately, so that gaining time-saving will transform to more earnings. . TECHNICAL SPECIFICATIONS: Model: COMPACT 160 Production capacity: 160 m3 Mixer type: Twinshaft – 4.5 m3 Aggragate bunker: 4x30 m3 Cement weighing: 2000 kg Additives weighing: 2x50 kg Water weighing: 1000 lt Cement silo is optional. COMPACT 160 consist of: • Aggregate Storage Hopper • Aggregate Weighing Hopper • Aggregate Transfer Conveyor or Bucket System • Twinshaft Mixer • Mixer Chassis, Walking Platforms, Ladder • Water Weighing Hopper • Cement Weighing Hopper • Admixture Weighing Hopper • Air Compressor • Cement Screw Conveyor • Bolted Cement Silo • Top Filter, Safety Valve and Accessories • Control Cabinnet • PC and Automation System • Control and Power Panel Hsdozl Np Nspfx Abhenp FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, functionality: fully functional, power: 210 kW (285.52 HP), fuel type: electric, color: silver, overall weight: 27,000 kg, empty load weight: 27,000 kg, operation weight: 36,000 kg, maximum load weight: 50,000 kg, tire size: 6*2, tire condition: 100 %, axle configuration: 3 axles, Year of construction: 2026, machine/vehicle number: MYM-J57C90, Equipment: hydraulics, low noise, rubber tracks, Mobile Crusher: Smart C&D Waste Recycling Solution Turn Demolition Debris into Profit Construction and demolition waste accounts for 30-40% of global waste. Our mobile crushing solution processes C&D waste on-site, transforming costly debris into valuable recycled aggregates. Technical Specifications 900×1060 Mobile Jaw Crusher Crusher Unit: Jaw opening: 900mm × 1060mm Max feed size: 750mm Output size: 75-200mm (adjustable) Capacity: 80-180 TPH Power: 90-110 kW Vibrating Screen: 2-deck or 3-deck configuration Screen area: 3.6-4.8 m² Motor power: 15 kW Produces 3-4 aggregate sizes simultaneously Feeder: Belt width: 1000mm Variable speed: 0-25 m/min Power: 7.5 kW Hopper capacity: 5-8 m³ Overall: Dimensions: 12-14m (L) × 2.8-3.2m (W) × 3.8-4.2m (H) Weight: 38-45 tons Total power: 120-150 kW Fuel consumption: 25-35 L/hour (diesel option) What We Process ✓ Concrete (plain & reinforced) ✓ Asphalt pavement ✓ Bricks and masonry ✓ Tiles and ceramics ✓ Mixed demolition debris ✓ Road construction waste Complete Recycling Process 1. Feeding Large hopper (5-8 m³) receives mixed C&D waste up to 750mm 2. Primary Crushing 900×1060 jaw crusher reduces material to 75-200mm with 4-6:1 reduction ratio 3. Magnetic Separation Automatic removal of steel rebar (>95% recovery rate) 4. Screening Multi-deck screen produces multiple grades: 0-5mm (sand) 5-10mm 10-20mm 20-40mm 5. Dust Control Integrated water spray system (8-12 nozzles) achieves >90% dust suppression Key Features Mobility: Track-mounted: Self-propelled, 0.8-1.2 km/h Wheel-mounted: Highway transportable Setup time: 30-60 minutes 360° working radius Automation: PLC control system Remote operation (50m range) Real-time monitoring Automatic overload protection Performance: Concrete: 120-150 TPH Asphalt: 100-130 TPH Mixed waste: 80-120 TPH Screening efficiency: >95% Output Products Recycled Aggregates: 0-5mm: Concrete, mortar (15-20% output) 5-10mm: Asphalt mix, drainage (20-25%) 10-20mm: Concrete, road base (25-30%) Hjdpjq Nf Tvofx Abhjnp 20-40mm: Sub-base, backfill (25-30%) Applications Building demolition Highway reconstruction Bridge dismantling Airport runway recycling Disaster debris management Urban renewal projects Service Package Included: Factory testing Installation supervision Operator training (3-5 days) 12-month warranty Lifetime technical support Spare parts availability Get Started Transform C&D waste from cost to profit. Our 900×1060 mobile crusher delivers proven performance, exceptional ROI, and environmental sustainability. Contact us for: Detailed specifications Custom configurations Site assessment Equipment demonstration Competitive quotation Make waste work for you. Choose proven mobile crushing technology for sustainable C&D recycling.

Condition: used, Year of construction: 2000, machine/vehicle number: SO126, Used HDPE Extrusion Blow Molding Machine for 10 L – 300 bph – Overview Second-hand Uniloy Milacron HSM10/D extrusion blow molding machine designed for producing up to 10 L HDPE containers. With a single-parison head and robust clamp, this EBM unit is ideal for industrial packaging and beverage production auxiliaries (e.g., water canisters, edible oils) and can be integrated within a used bottling line. Documentation and manuals are available. Reference number: SO126. Technical Specifications & Performance Data Main data Make/Model: Uniloy Milacron HSM10/D Year: 2000 Technology: Extrusion Blow Molding (EBM), single parison Material: HDPE Number of cavities: 1 Max container volume: 10 L Indicative output: up to about 300 bph on 10 L (application-dependent) Manuals: included Ref. no.: SO126 Extruder Screw diameter: 100 mm; L/D 24 HDPE screw speed: 0–70 rpm Plasticizing capacity (HDPE): approx. 300 kg/h Main extruder motor: 89 kW Heating zones: 6; barrel heating power: 31.4 kW Motor cooling power: 0.58 kW; barrel cooling power: 1 kW Parison head Type: PE 1/200, single parison Max die diameter: 200 mm Head heating power: 14.2 kW Parison thickness control: hydraulic (wall-thickness programming) Clamp & blow unit Clamp force: 200 kN Max mould size: 650 × 500 mm (H) Mould thickness: 2 × 150 mm Mould opening stroke: 300 mm Horizontal carriage stroke: 660 mm Blow pin stroke: 240 ± 5 mm Blow pin thrust at 50 bar: 320 kg Electrical Installed power: 156 kW (average consumption ~104 kW) Supply: 400 V, 50 Hz, 318 A, 3 + N Hydraulic system Reservoir capacity: 400 l Pump flow (1470 rpm): 123 l/min Max pressure (main circuit): 190 bar Main hydraulic motor: 37 kW; oil cooling motor: 1.5 kW Pneumatics Operating pressure (general): 6–8 bar; air use: 2000–2500 Nl/min Post-cooling pressure: 6–8 bar; air use: 1000–1500 Nl/min Cooling water Mould circuit: 8–12 °C; flow 15 m³/h Extruder & hydraulic oil: 10–24 °C; flow 4 m³/h Dimensions & weights Approx. machine size (L × W × H): 7600 × 7700 × 3900 mm Blow unit weight: 7600 kg; Extrusion group weight: 6400 kg Noise level at operator: < 85 dB(A) Advanced Automation & Control Systems Hsdpfeyhbt Hex Abhonp Hydraulic wall-thickness programming for precise parison control, improving weight distribution and top-load performance on 10 L containers. Dedicated Uniloy command and control software (version code available in manuals) with operator interface for setpoint management and diagnostics. Integrated temperature control across six extruder zones and heated head for stable processing at up to 300 °C transformation temperature. Interlocked guarding and emergency stops for safe operation. Production Line Integration Capabilities This second-hand extrusion blow molder is integration-ready for downstream equipment typical of a used bottling line and industrial packaging systems: Conveyor...

Condition: like new (used), Year of construction: 2023, operating hours: 100 h, functionality: fully functional, OKUMA MU-6300V (2023.11) – Technical Specifications Model: MU-6300V Simultaneous 5-axis Vertical Machining Center Water-soluble coolant CNC Control: OSP-P500M Display language: Korean Power supply: 220V / 60Hz Operating voltage: 100V CE + EMC compliant Axis Travels X-axis: 925 mm Y-axis: 1,150 mm Z-axis: 600 mm A-axis: +90° / −120° C-axis: 360° continuous Simultaneous 5-axis machining Feed Rates Rapid traverse (X/Y/Z): 50 m/min Cutting feed: 50 m/min A-axis rapid speed: 10,800°/min C-axis rapid speed: 32,400°/min Table diameter: Ø630 mm Table configuration: 6 radial T-slots (18H7) Spindle taper: BT40 (MAS BT40) BIG PLUS dual-contact spindle Spindle speed: 50–15,000 rpm Main motor: 22 kW (10 min) / 18.5 kW (continuous) Spindle oil cooling Hnsdpfx Aezhgh Iobhop TAS-S spindle thermal compensation TAS-C ambient thermal compensation Tool Magazine 32-tool Automatic Tool Changer (ATC) Air blow for ATC Taper cleaning air blow Standard tool release system JIS pull studs Measuring System Absolute linear scales on X/Y/Z axes Renishaw TS27R automatic tool setter and tool breakage detection Renishaw RMP60 wireless workpiece probing system Calibration reference tool included Manual measurement function 5-Axis Functions Tool Center Point Control II (TCP/RTCP) Hyper-Surface II Slope Machining Function Inverse Time Feed Manual Tool Center Point Transfer Table Coordinate System Transfer DNC-DT Accuracy & Compensation Five Tuning Kit Geometric error measurement Geometric error compensation Straightness compensation Dynamic displacement compensation Coolant System Through-Spindle Coolant (TSC): 1.5 MPa Through-spindle air blow Standard coolant pump: 390 W Wash-down pump: 800 W Through coolant pump: 1.1 kW Cyclone + sintered bag filtration system Chip Handling Floor-type hinge chip conveyor Conveyor height: 750 mm Right-side chip discharge Safety & Protection Full enclosure with roof Y-axis guide cover CE-compliant door interlock CE + EMC export specification 220–480V transformer KCS machine nameplate Operator Interface 21.5-inch adjustable OSP control panel Smart OSP Servo Navigation AI Servo Navigation SF ECO Suite Plus ECO Power Monitor OSP Software Features 4 GB program storage 10 MB operation buffer 999 tool offsets 200 work coordinate systems Tool Life Management Tool Wear Compensation Real 3D Simulation NC Operating Monitor Simple Load Monitor Tool Damage Detection Programmable Messages Programmable Mirror Image Program Stroke Limit Automatic Program Update Automatic Power-Off Function Digital Twin Functions Digital Twin DMC Kit Hyper Simulation Quick Modelling Interactive MAP (I-MAP) OPC UA for Machine Tools Additional Equipment LED work lights Three-color status indicator Mist collector connection (Ø150 mm) Virus protection system

Condition: excellent (used), Year of construction: 2018, 2018 Brother Speedio S700 X1 High Speed Drill and Tap Machining Center X axis: 700 mm; Y axis: 400 mm; Z axis: 300 mm; Table size: 1150 x 400 mm; Table load capacity: 250 kg; Tool change time: 0.8 sec (tool-to-tool); Spindle taper: 7/24 No. 30 (Big-Plus) Dual Contact; Tool shank: MAS-BT / BBT30; Retention knob: MAS-P30T-2 (30 degrees); Tool changer: 21-tool carousel with a total load capacity of 35 kg; Limitation of tool balance: 50 g; Limitation of spindle rotation speed: 16,000 rpm; Spindle motor: 4.9 kW; Rapid traverse rates: X = 50 m/min, Y = 50 m/min, Z = 56 m/min; CNC control: CNC-C00; included hydraulic fixing table; Renishaw broken tool detector, Transformer/power supply unit, HAKUSAN chip conveyor, emulsion mist separator SARA UC 1 SD; Machine control indicated readings, recorded 09/06/2026: Total operation time 17,822 hrs, Power-on time 33,212 hrs. Spindle taper: 7/24 No. 30 (BT30). (Machine internal clock not synchronized due to CM OS battery low level, displays 2011/04/01); NOT included os the external hydraulic unit. Weight: 2400 kg; Footprint: L 2100 mm x W 2000 mm x H 2300 mm; Inv. Nr: 1022; Serial number: 145908; Optional dismantling and loading services are available on site. Indicative price: 120 EUR, VAT not included. Hnjdjzk Nhpspfx Abhsp

Condition: used, Electric generator set with a capacity of 2000 KVA (SDMO – 16 cylinders) in very good condition, professionally dismantled, with low operating hours (it was actually used as a backup for a factory) + SREE 2000 KVA transformer + complete electrical cabinets and management system for this high-power unit. Price upon request. Hodpedlumyefx Abhjnp We also have an electric generator set with a capacity of 200 KVA.

Year of construction: 2012, condition: excellent (used), functionality: fully functional, The technical condition is very good, and the device has been tested. This means that the devices are calibrated, perform 100% accurate measurements, and are regularly warmed up for at least 12 hours once a month. It is possible to perform an on-site transformer oil test – of course, after initial verification to compare the results, as shown in the photos. Hnodpjzcmblofx Abhsp The MYRKOS chromatograph performs the analysis of concentrations of gases dissolved in insulating oil (DGA). It allows for the detection of developing faults in power transformers and other equipment containing insulating oils (chokes, current transformers). It also allows for the analysis of gas extracted from a Buchholz relay! The MYRKOS chromatograph is extremely accurate, compact, and provides complete coverage for the relevant concentrations of fault gases in the oil. A gas standard (a cylinder with calibration gas) ensures measurement consistency with concentration standards. Before performing a measurement, the device is always calibrated, and its functionality is checked. A special shaking syringe (included) ensures the correct volume ratio. An excellent solution for oil laboratories in power plants and research facilities serving the power industry. PPMReport software with a Polish language version is included. It has built-in diagnostic tools: Duval's triangle and Rogers' ratios. Used by power plants, system operators, and laboratories serving the power and industrial sectors. The field version is equipped with a special pressure vessel for helium carrier gas (purity 99.999%). It is supplied with shaking syringes for preparing the extraction gas cushion, syringes for calibration, and an air sample. TECHNICAL PARAMETERS Number of gas types: 9 (Hydrogen H2, Methane CH4, Ethane C2H6, Ethylene C2H4, Acetylene C2H2, Carbon monoxide CO, Carbon dioxide C02, Oxygen 02, Nitrogen N2) Measurement range for gas concentrations in oil: H2: 5-60,000 ppm, Other gases: 1-60,000 ppm, 02: 60 ppm - 100,000 ppm, N2: 500 ppm - 100,000 ppm : 1050 mm 3. TECHNICAL DESCRIPTION Gas chromatograph for testing insulating oils using the DGA (Dissolved Gas Analysis) method, for field and laboratory applications. The laboratory version includes a shaker. The MYRKOS chromatograph performs the analysis of concentrations of gases dissolved in insulating oil (DGA). It allows for the detection of developing faults in power transformers and other equipment containing insulating oils (chokes, current transformers). It also allows for the analysis of gas extracted from a Buchholz relay. The MYRKOS chromatograph is extremely accurate, compact, and provides complete coverage for the relevant concentrations of fault gases in the oil. The condition is very good. We have two identical, fully functional units. If you purchase both, the price of one will be 50% lower. Before purchasing, I recommend inspecting and testing the equipment on-site (performing a test). The last test was performed on November 21, 2025, and compared with another MYRKOS device (the test was verified in a certified laboratory). Available for viewing in Rzeszów.

Condition: used, Koppelbox Eigensteuerung / Couple Box SelfControl MBO MS / MCKoppelbox Eigensteuerung (Trafokasten) für 24 polige Stecker Couple Box SelfControl (transformer box) for 24 pin connectors Hnodpfx Absrnvgiohep Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: ready for operation (used), Year of construction: 2024, spindle motor power: 22,000 W, spindle speed (max.): 4,000 rpm, travel distance Y-axis: 105 mm, controller manufacturer: FANUC, controller model: i Series, number of axes: 4, This 4-axis DN SOLUTIONS PUMA 2600Y II was manufactured in 2024. It features a maximum turning diameter of 376 mm and a turning length of 760 mm. The machine is equipped with a main spindle speed of 4,000 rpm and a turret with 12 tool stations. If you are looking to get high-quality turn-mill capabilities, consider the DN SOLUTIONS PUMA 2600Y II machine we have for sale. Contact us for further details. • 15" color touchscreen display • iHMI Easy Operating System (EZI & Machining Cycle) • Absolute feedback system • CE certified • Metric configuration • Power supply: 3 Phase AC 380V / 50Hz • Number of axes: 4 (X, Z, Y, C) • Maximum turning diameter: 376 mm • Maximum turning length: 760 mm • Bar capacity: 81 mm Hnedpfxezlqpqj Abhop • Main chuck size: 255 mm (10") • Hardened & ground hard jaws • Main spindle motor power: 22 / 15 kW • Built-in spindle design • C-axis functionality • Milling spindle power: 7.5 / 1.5 kW • Live tool speed: up to 10,000 rpm • Turret type: BMT65P • Number of tool stations: 12 • Automatic electric tool setter • Programmable live tailstock • MT5 live center • Coolant pump: 1.1 kW / 1.0 MPa / 20 L/min • Flood coolant for rotary tools • Coolant tank on right side • Thermal compensation structure • Chuck clamp confirmation • Bar feeder interface • Embedded Ethernet • Program storage: 5,120 m (2 MB) • 1,000 program capacity • 128 tool offset pairs • 8 work coordinate systems • Built-in transformer • Electrical line filter • 3-color signal tower (red / yellow / green) • Tool number display Additional equipment • Hinged belt chip conveyor (right side) • Belt-type oil skimmer • Parts catcher with collection box • Coolant gun • Air gun

Condition: ready for operation (used), Year of construction: 2024, travel distance X-axis: 1,050 mm, travel distance Y-axis: 570 mm, travel distance Z-axis: 510 mm, table load: 1,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis DN SOLUTIONS DNM 5700 was manufactured in 2024. It features an X-axis travel of 1,050 mm, Y-axis travel of 570 mm, and Z-axis travel of 510 mm. The machine includes a robust table size of 1,300 × 570 mm and a maximum table load of 1,000 kg. If you are looking to get high-quality machining capabilities, consider the DN SOLUTIONS DNM 5700 vertical machining centre we have for sale. Contact us for further details. • 15" color touchscreen display • Absolute feedback system • CE certified • Metric configuration • Power supply: 3-phase AC 380V / 50Hz • Table size: 1,300 × 570 mm • Spindle taper: BIG PLUS BT40 • Spindle motor power: 15 / 11 kW • Spindle head cooling system • Tool magazine type: geared driven • Tool holder: BIG PLUS BT40 • Rapid traverse rates: X/Y 36 m/min, Z 30 m/min Hnedezlg Uispfx Abhsp • Through-spindle coolant: 2.0 MPa (20 bar), 4.0 kW • Flood coolant pump: 0.4 kW, 0.15 MPa, 40 L/min • Built-in transformer • Electrical line filter • Ethernet interface • Data server & memory card: 1 GB • Program storage capacity: 5,120 m (2 MB) • 1,000 program capacity • AICC II – 200 blocks • iHMI easy operating system (EZI & Machining Cycle) Additional equipment • Hinged belt chip conveyor (right side) • Belt-type oil skimmer • Coolant gun • Air blower • Air gun • Portable MPG handwheel • Additional axis preparation (1-axis wiring & pneumatics)

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, DC welding unit consist of: 1 pce. Welding controller BIHLER B 10 3 pcs. Welding transformer Hodpfjvxkzqsx Abhsnp 1 pcs. Cooler unit Welding capacity: 3 x 70 kVA Capacity of the transformer 70 kVA at 50 % ED Power voltage: 400 V, 50 Hz.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Middle frquency welding unit consist of: Hnedpfx Abox I R Hqjhsp 1 pce. Welding controller BIHLER B 5000 1 pcs. Welding transformer 130 kVA Welding capacity: 130 kVA Power voltage: 400 V, 50 Hz.

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 18,000 rpm, travel distance X-axis: 1,020 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 805 mm, controller manufacturer: FANUC, controller model: 31i-b5, spindle motor power: 22,000 W, table load: 800 kg, number of slots in tool magazine: 40, number of axes: 5, This 5-axis DN SOLUTIONS DVF 8000 was manufactured in 2022. It features impressive X-axis travel of 1,020 mm, Y-axis travel of 850 mm, and Z-axis travel of 805 mm. The machine includes a maximum workpiece diameter of 1,000 mm and a spindle speed of 18,000 rpm. If you are looking to get high-quality machining capabilities, consider the DN SOLUTIONS DVF 8000 universal machining centre we have for sale. Contact us for further details. • 15" color touchscreen display • CE certified Hsdpfozlg Ngsx Abhonp • Metric configuration • Power supply: 3-phase AC 380V / 50Hz • Number of axes: 5 (X, Y, Z, A, C) • Simultaneous 5-axis machining • Absolute feedback system (absolute pulse coder on A- and C-axis) • Table diameter: 800 mm • Maximum workpiece diameter: 1,000 mm • Maximum workpiece height: 630 mm • Spindle motor power: 22 / 18.5 kW • Spindle taper: HSK-A63 • Tool holder type: HSK63A • Flood coolant pump: 2.5 kW / 0.44 MPa / 100 L/min • Through-spindle coolant: 4.0 kW / 2.0 MPa (20 bar) • Tool load monitoring • Portable MPG handwheel • Automatic power off • Program storage: 10,240 m (4 MB) • 1,000 program capacity • 400 tool offset pairs • 48 work coordinate systems • Large capacity memory: 2 GB • Data server & memory card: 2 GB • Embedded Ethernet • iHMI easy operating system (EZI & Machining Cycle) • DSQ1 (AICC II – 200 blocks) Additional equipment • Hinged belt chip conveyor (rear side) • Cyclone filter system • Renishaw probe ready (RMI-Q) + software • External power transformer • Electrical line filter • Machine lifting hooks

Condition: ready for operation (used), Year of construction: 2024, travel distance X-axis: 1,300 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, controller manufacturer: FANUC, controller model: i series, table load: 1,300 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis DN SOLUTIONS DNM 6700 was manufactured in 2024. It features an impressive X-axis travel of 1,300 mm, Y-axis travel of 670 mm, and Z-axis travel of 625 mm. The machine includes a robust table size of 1,500 × 670 mm and a maximum table load of 1,300 kg. If you are looking to get high-quality machining capabilities, consider the DN SOLUTIONS DNM 6700 vertical machining centre we have for sale. Contact us for further details. • 15" color touchscreen display Hodjzlg Icspfx Abhonp • Absolute feedback system • CE certified • Metric configuration • Power supply: 3-phase AC 380V / 50Hz • Table size: 1,500 × 670 mm • Spindle motor power: 15 / 11 kW • Spindle taper: BIG PLUS BT40 • Spindle head cooling system • Tool magazine type: geared driven • Tool holder type: BIG PLUS BT40 • Rapid traverse (X/Y/Z): 36 / 36 / 30 m/min • Flood coolant pump: 0.4 kW / 0.15 MPa / 40 L/min • Through-spindle coolant: 1.5 kW / 2.0 MPa (20 bar) • Embedded Ethernet • Program storage: 5,120 m (2 MB) • Program capacity: 1,000 programs • AICC II – 200 blocks • iHMI Easy Operating System (EZI & Machining Cycle) • Built-in transformer • Electrical line filter Additional equipment • Hinged belt chip conveyor (right side) • Portable MPG handwheel • Additional axis preparation (1 axis wiring & pneumatics)

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 1,630 mm, travel distance Y-axis: 762 mm, travel distance Z-axis: 650 mm, controller manufacturer: FANUC, controller model: i Series, table load: 1,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 28,000 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis DN SOLUTIONS DNM 750 II was manufactured in 2023. It features an impressive X-axis travel of 1,630 mm, Y-axis travel of 762 mm, and Z-axis travel of 650 mm. The machine includes a robust table size of 1,800 × 750 mm and a maximum table load of 1,500 kg. If you are looking to get high-quality machining capabilities, consider the DN SOLUTIONS DNM 750 II vertical machining centre we have for sale. Contact us for further details. • 15" color touchscreen display • Absolute feedback system • CE certified • Metric configuration • Power supply: 3 Phase AC 380V / 50Hz Hsdpfx Abjzlg Amjhonp • Table size: 1,800 × 750 mm • Spindle motor power: 28 / 15 / 11 kW • Spindle taper: BIG PLUS BT40 • Spindle air curtain • Tool holder type: BIG PLUS BT40 • Flood coolant pump: 0.4 kW / 0.15 MPa / 40 L/min • Through spindle coolant: 4.0 kW / 2.0 MPa (20 bar) • Machine enclosure: Full splash guard with top cover • Tool load monitoring • Portable MPG handwheel • Additional axis preparation (1 axis wiring & pneumatics) • Embedded Ethernet • Program storage: 5,120 m (2 MB) • 1,000 program capacity • Data server & memory card: 1 GB • AICC II – 200 blocks • iHMI easy operating system (EZI & machining cycle) • Built-in transformer • Electrical line filter Additional equipment • Hinged belt chip conveyor (right side) • Coolant tank on right side • Belt-type oil skimmer • Coolant gun • Air blower • Air gun • Machine lifting hooks

Condition: excellent (used), Turning diameter: 180 mm Turning length: 240 mm Travel distance - x: 120 mm Travel distance - z: 280 mm Spindle speed: 4,500 rpm Spindle bore: 46 mm Control system: Fanuc Oi-TF Number of spindles: 1 Spindle bearing diameter: 75 mm Bar diameter: 35 mm Total power consumption: 7.5 / 5.5 kW Hedpfxszk Dw Ss Abhonp Machine weight (approx.): 2,300 kg Rapid traverse X + Z axes: 18 / 24 m/min Rapid traverse X + Z axes: 18 / 24 m/min Equipment/Accessories: - Machine bed according to FEM - Turret with 8 stations and direct mounting - Axis guides in the X and Z axes - Ball screws - Working spindle - Optimal chip flow and accessibility of the working area - Ideal for machining from bar stock or cut-off pieces - Hydraulic unit - Hydraulic hollow clamping cylinder - FANUC Oi-TF control system with 10.4" touch display - Complete coolant system - Alignment plates - Control cabinet - Transformer - Door switch modification with M30 function including: - FC 60 Compact loader - Spiral chip conveyor to the rear Operating hours: 4,525 h

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Turning diameter: 180 mm Turning length: 190 mm Travel – x-axis: 120 mm Travel – z-axis: 230 mm Hnedpfx Abezk Dwlohsp Spindle speed: 4,500 rpm Spindle bore: 46 mm Control system: Fanuc Oi-TF Spindle bearing diameter: 75 mm Bar diameter: 26 mm Total power consumption: 7.5 / 5.5 kW Machine weight (approx.): 1,620 kg Equipment/Accessories: - Spindle orientation modification (controlled via M-command) Pulse encoder and software adjustment - Automatic safety door modification (controlled via M-command) Confirmation via servo motor and toothed belt, and safety device according to CE standard - Robot interface modification, signal description: Robot start signal ON/OFF Safety door OPEN/CLOSE Chuck OPEN/CLOSE Chuck air blow ON/OFF - Tool package consisting of: 8 x clamping blocks for external holders, 20x20 4 x boring bar holders, D.25, No. 2758201020 - Hinged belt for chip conveyor, discharge to the rear - Transformer, 12 kVA Operating hours: 9,046 h