Used Valve Testing Bench for sale (18,848)

Condition: used, Langbein double-saddle grinding bench with left/right feed for woodworking. Technical data: - Clamping length per side: approx. 450 mm Lsdpfxsztvzno Apdsag - Spindle diameter: 45/35 mm

Condition: used, Year of construction: 2000, number of spindles / bore capacity in steel (diameter) / mm Lsdpsy S Dm Ssfx Apdoag bore stroke / mm BD13M – 5-Spindle Gang Drill / Bench Drill

Condition: used, bore capacity in steel (diameter) / mm Lasdpfxsy Tbv To Apdjg throat / mm bore stroke 70 mm total power requirement 0,9 kW

Year of construction: 2012, condition: good (used), Separator sluice / cell wheel sluice Nestro, year of manufacture 2012, for the separation / differentiation of paper chips or paper edge sections. Technical data: Manufacturer: Nestro Lufttechnik GmbH Year of manufacture: approx. 2012 Motor: 4 kW Volume flow rate max. 28000 m³/h Inlet diameter max.: 450 mm Speed: 22 rpm Rotor width: 1500 mm Rotor diameter: 1200 mm Dimensions: 2200 x 2200 x 2500 mm (L x W x H) Lodpfxszt Ipke Apdeag Weight: approx. 3000 kg Note: The machine is in good condition. It was inspected and tested by us in 28816 Stuhr. The video can be found at the top of our website or on our YouTube channel. Inspections, including under power, are possible at any time by arrangement. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Condition: new, Safety valve ARI for steam systems. Lsdjzbr Rvepfx Apdsag

Condition: new, Jensen Drain Valve, DN 100 Laedpfxey Uigio Apdjg Jensen Article No. 700280766

Condition: new, Drain Valve Lsdpfjy Ukxmox Apdeag Girbau Drain Valve For HS 6013, 6017, 6023 Girbau part number: 600544 Location: Shelf 11

Condition: new, 2 stainless steel valves DN25 PN 40 Pressure range: 0-10 bar Lasdpfx Apszb Ay Usdjg Operating pressure: 3.5 - 8 bar

Condition: new, 13 suction valves, as shown in the picture. Manufacturer unfortunately unknown. Laodpfjzaad Ijx Apdeg

Year of construction: 2009, condition: not inspected (used), Test bench DTB 2 Year of manufacture 2009 disassembled Ljdpfx Ajkvn R Rjpdeag The offer is directed exclusively to traders in the sense of § 14 BGB (German Civil Code). No sale to private individuals!

Condition: used, LDS V455 Vibration Testing System / Shaking Testing System Manufacturer: Ling Dynamic Systems Ltd. (LDS) Shaker: V455 Machine Type: Electro-dynamic Vibration / Shaking Testing System Power Amplifier: LDS PA 1000 Power Amplifier For sale is a used vibration and shaking testing system from Ling Dynamic Systems Ltd. (LDS). The system consists of an electro-dynamic LDS V455 shaker, a PA 1000 power amplifier, and a separate fan/cooling unit. The system is suitable for generating defined mechanical vibrations, as well as for vibration, stress, and component testing. Possible applications include use in laboratories, development, quality assurance, and industrial testing. Technical data: Manufacturer: Ling Dynamic Systems Ltd. (LDS) Shaker: V455 Ledpfxjzulngj Apdoag System: Electro-dynamic Vibration / Shaking Testing System Power Amplifier: LDS PA 1000 Power Amplifier Amplifier Output Current Indicator: 0–20 A RMS Year of Manufacture: Not specified Fan Motor: Manufacturer: ASEA / Electrolux Elmotor A/S Type: M056SX2 Voltage: 220–240 V Current: 2.0 A Speed: 2,880 RPM Protection Class: IP54 Insulation Class: B Capacitor: 1.5 µF / 360 V Country of Manufacture: Denmark Fan: Manufacturer: Air Control Installations (Chard) Ltd. Type: 2M53 Voltage: 240 V Phase: 1 Frequency: 50 Hz Current Draw: 0.45 A Speed: 2,880 RPM Capacitor: 1.5 µF MFD: 440 VAC/WKG: 25 Made in U.K. Dimensions: The overall dimensions of the system cannot be clearly determined from the available images and nameplates. Equipment: LDS V455 electro-dynamic shaker LDS PA 1000 power amplifier Separate fan/cooling unit Shaker mounting / base frame Hoses and connection cables Transport case for the power amplifier Accessories as shown in the images Shipping data: Total weight: 240 kg Condition: Used Signs of wear and tear due to age and use are present. Dirt, paint chips, and traces of corrosion are visible. Optical condition as shown in the images. Scope of supply: 1 × LDS V455 electro-dynamic shaker 1 × LDS PA 1000 power amplifier 1 × Fan/cooling unit Shaker mounting / base frame Connection cables and hoses as shown in the images Transport case for the power amplifier Accessories as shown in the images Availability: by arrangement. Scope of supply as shown in the images. Subject to changes, errors and prior sale.

Year of construction: 2015, condition: new, functionality: fully functional, machine/vehicle number: 090-023, We offer this new OPPLINGER Optimatic RSMO 090 automatic leveling and tensioning bench, year of construction 2015. Type: RSMO 090 Serial number: 090-023 Technical details: - Level, Tension, Pull Back, Set Tires - Microprocessor control Ljdpfozuc Nbox Apdsag - Touch screen 12,1 ″ - width of band saw blades 65 – 300 mm - length of band saw blades 4300 – 19800 mm - Blade thickness 0,7 – 2,7 mm - Electric supply 3x 400VAC– 50Hz or special voltage - Pneumatic supply 0,7L / Hub 5 Bar - Weight 700 kg If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, EV Car Motor Assembly and Testing Line (2021) Designed to produce EV motors in the power range of 180–300 kW Including manual, semi-automated, and automated operations Cycle time: 86s Stations and Equipment Component loading - KUKA KR15 R2700-2/FLR robot (2021) - Material infeed - Inner housing heating with induction coil up to 240 °C - Stator pressing into housing - 1T TOX press - Keyence CA-DQP25X - Cooling tunnel - Cooldown to 24 °C - Cycle time: 600 s X-ring and D-ring inner housing assembly - X-ring and D-ring seal insertion into housing - Dedicated round assembly tool available Outer housing pre-assembly - Flange screw into housing with Bosch Rexroth ESA013G-G0 screwdriver - Automatic inner and outer housing joining Outer housing assembly - 3T TOX EQK 030 press - 2x Cognex scanners - 2x Keyence Camera V3 - 3x VS camera systems Rotor magnetization and measurement - Magnet magnetization - MagSys magnetizer MC3K82 (2020) - Magnetizing fixture MFFer8/160/250 A-shield pre-assembly and rotor insertion - Rotor bearing and resolver pressing - 3T TOX press A-shield assembly into outer housing - 1T TOX EQK press - A-shield screwing into outer housing with pneumatic screwdriver (5 Nm) Mounted component fastening - Fastening with 4GE59 Rexroth screwdriver - Manipulator system Handyflex 400 Inter-connector connection - Manual mounting of inter-connector and insulating tube Counter ring insertion, cooling cover, and vent assembly - 3T TOX EQK 030 press Rotor cooling cover mounting - Screwing with 4 Nm End-of-line (EOL) electrical testing loop Lasdpfx Apozhub Aodog - 5x Deutronic testers, including: - ETL ATS 400 high-voltage testers - HIOKI RM3545 resistance testers - Reilhofer EOL analyzers Inter-connector disconnection station - Disconnection of the inter-connector - Insertion of 2 screws and screwing with Rexroth screwdriver (13 Nm) - Manipulator system Handyflex 300 - Washer control - Motor rotation Leak testing - 2x Leak test stations with Innomatec LTC-902 testers - Vacuum and overpressure leak tests - Tested quantity: approx. 50,000 pcs per test station Rotation, laser marking, stamping, engraving, and inspection - ADT stamping machine - Arex Laser 450 - Keyence CA-H camera system - Datalogic CBX 100 reader - Tested quantity: approx. 130,000 pcs Transportation protection - Yellow transportation cover/cap and plug assembly - Manual insertion of caps and hole securing Packaging and final inspection - Dalmec manipulator (2022)

Condition: good (used), weight of the machine ca. 5,5 t Table tip diameter: 35 mm Tip height above table: 75 mm Counterholder tip diameter: 50 mm Counterholder tip stroke: 40 mm Minimum center-to-center distance: 20 mm Laedpfjzidz Uox Apdog Minimum measuring height above table: 50 mm Maximum measuring height above table: 550 mm Table diameter: 260 mm Base circle diameter: 0–630 mm Maximum rolling path: ±115 mm Maximum workpiece weight: 300 kg X-axis: 230 mm Y-axis: 370 mm Z-axis: 500 mm Max. workpiece diameter: 630 mm Software for new PCs: Windows 11 Bevel gear software, if desired, available only on Metrotek installations Additional information: - Machine calibrated according to DAKKS on November 19, 2017

Condition: good (used), Year of construction: 1992, weight 5,5 t Table tip diameter: 35 mm Tip height above table: 75 mm Counterholder tip diameter: 50 mm Counterholder tip stroke: 40 mm Minimum center-to-center distance: 20 mm Minimum measuring height above table: 50 mm Maximum measuring height above table: 800 mm Table diameter: 500 mm Base circle diameter: 0–1000 mm Lajdpfx Aozidz Ispdjg Maximum rolling path: ±115 mm Maximum workpiece weight: 2000 kg X-axis: 230 mm Y-axis: 530 mm Z-axis: 750 mm Max. workpiece diameter: 1000 mm Software for new PCs: Windows 11 Bevel gear software, if desired, available only on Metrotek installations Additional information: - Machine calibrated according to DAKKS on November 19, 2017

Year of construction: 2008, condition: excellent (used), Robot cell for leak testing consisting of: Lasdpfxsn D D E To Apdeg Robot FANUC LR Mate 200iC/5L - 2008, Table for measurements, equipped with 8 light curtains, 2 pieces of Innomatec equipment for leak testing, type LTC - 502. The cell has a safety system and CE

Condition: used, Additional information based upon request including photos. Ledpfx Aezuwqmspdoag

Condition: used, Inlet diameter: 260 mm Ljdpfszr Hg Sox Apdeag with sprocket and drive shaft

Condition: used, Inlet cross-section approximately 450 mm with SEW gearmotor, 3 kW. Lsdpfx Apszr Hgledjag

Condition: new, Tool grinding machine Manufacturer: OPTigrind Model: GH 20 T Art. No.: 3100125 Condition: New machine Lasdpoc I Tzvofx Apdsg Speed: 5,000 rpm Clamping range: 1 - 12 mm Standard equipment: - Collets 385E, sizes 4 / 6 / 8 / 10 / 12 mm - Corundum cup grinding wheel - Diamond cup grinding wheel - Device for re-grinding turning tools - Device for re-grinding shank milling cutters - Device for re-grinding twist drills - Operating manual

Condition: used, The robust Optimum B 23 Pro bench drill for drilling into wood, metal or other materials, featuring a quick-action chuck. Technical data: - Spindle mount: MK 2 - Rated power: 750 W // 400 V // 50 Hz Laodpfx Aezrytljpdsg

Condition: used, Schneider SK D 2 twin-spindle table router for the precise machining of solid wood and wood-based materials, featuring two independently operable router spindles. The machine enables efficient working thanks to the rapid changeover between different milling tools without any changeover times. Ideal for a wide range of milling tasks in window, door and furniture manufacturing. Technical data: - Motor, each: 4.5 kW - Spindle diameter: 30 mm - Spindle centre distance: 600 mm - Speed settings: 3000/4000/5000/6000/8000/10000 Ljdezryrzopfx Apdjag - D-89440 Lutzingen, Tel. , Fax: , April 2015, asking price €500 - D-89440 Lutzingen, Tel. , Fax: , May 2015, cost price €1,000

Condition: used, Unidentified test mandrel, 50.000 mm, with tapered shank. Ledpszrxwpsfx Apdeag Technical data: - Data 1: H=35.643 - Data 2: ø 50.000

Condition: used, Norgren I374997 Lasdpezrxtqefx Apdeg Technical data: - Condition: As new

Condition: used, 2 items as good as new Lodpfx Aezrxnzspdsag