Used Vemag, Poly-Clip Hp 12E, Fca 3442 for sale (8,142)

Condition: ready for operation (used), Can filling machine diameter 77 mm and 99 mm. VEMAG type FKF for filling in cans. Note: Kedpfx Adsimblqslsdt The byer will another machine- same as the offered for spare parts.

Condition: good (used), Year of construction: 1981, Ural 375D | 6x6 | Off-road drive | Military vehicle. Kdodpfowrwu Nsx Adlet For sale the legendary Ural 375D - a reliable 6x6 military truck, designed to work in the most difficult off-road conditions. - Imported from Germany, complete set of documents. - New Tarpaulin. • Engine: V8 petrol ZIL-375 (7.0L) • Power: approx. 180 HP • Drive: 6x6 (with the possibility of disconnecting the axles) • Gearbox: manual 5-speed • Off-road tires in good condition • Central wheel inflation system • Cargo box with tarpaulin Starts without a problem, ideal for collecting purposes, off-road expeditions, military shows or as a base for reconstruction (e.g. expedition camper).

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Equipment: documentation/manual, type plate available, Taylor Hobson Talyrond 265 roundness measuring instrument. Extremely accurate; it can measure the roundness of lenses, optics, pistons, turbine components, tubes, shafts, and also eccentricity, e.g., of cams on a camshaft or journals of a crankshaft. It is certainly of interest for motorsport and tuning companies. Ksdpfx Ajzcqy Ejdlsdt The first photo is a "representative image" from a Taylor Hobson catalog, showing how it is constructed, except for the computer, which is a newer, more modern HP model with a small form factor. Max. diameter 350 mm Max. test piece height 500 mm (higher values are possible by measuring in two parts, up to a maximum of 1000 mm...) Self-centering of the workpiece +/- 5 mm Max. weight of test piece 40 kg The system has been used very little and has had only two owners. The first owner, from whom I bought it, was an implant company in Hamburg; it was used in a "medically clean environment" and is extremely clean. It was never located in a dirty machine hall. The year of manufacture is estimated to be between 2003 and 2005. The Taylor-Hobson measurement software is, of course, included and runs on the supplied HP computer (without a password...). It is also on the USB stick, perhaps for installation on another machine at your location. Accessories are included: the original Taylor-Hobson desk, computer, monitor, seven (7!) measuring probes, each of which is very expensive to purchase. A sample/sample lens (hemisphere) is included for calibration! The very detailed operating manual is on the USB stick, and all circuit diagrams and functional diagrams are also included! The system will be shipped on two Euro pallets via a freight carrier. It is already well secured on them. The Talyrond 265 and the desk will be wrapped with bubble wrap, etc., and secured with stretch film to provide extreme protection during transport. The system itself is fixed with "transport safety screws." Shipping is at the buyer's expense and will be on two Euro pallets. The measuring system should definitely be assembled and put into operation by a Taylor Hobson service technician, who can then also recalibrate the system on-site. This is now recommended after a few years. Errors can be made during assembly and commissioning. For example, some locking screws are installed for transport, and if you forget them, the system could be damaged when starting up. A truly well-maintained, very accurate system that will continue to provide excellent service for many years to come!

Condition: used, Year of construction: 2016, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: -, overall weight: 1,000 kg, total length: 3,500 mm, total width: 500 mm, total height: 1,200 mm, input voltage: 400 V, type of input current: three-phase, cutting speed: 50 mm/min, The Oddy Novatek 2 Pocket Roll Plant with Pinner is used to automatically divide, round, shape, and mould raw bread dough into uniform rolls and buns at high speeds. It replaces the labor-intensive process of scaling and shaping dough by hand, making it a staple machine for small-to-medium commercial bakeries, wholesale bakers, and supermarket in-store bakeries. 1. Primary Functions: Dividing: It automatically cuts a bulk mass of dough into precise, equal weights without tearing the dough structure. Rounding: It rolls the divided dough portions into tight, consistent round dough balls (baps, dinner rolls). Pinning & Moulding: The integrated "pinner" section flattens and rolls the round dough pieces into elongated shapes (finger rolls, hot dog buns). 2. Specific Bakery Products It Creates: By changing the internal moulding drums or adjusting the pinner belts, bakeries use this machine to produce: Round items: Hamburger buns, traditional baps, dinner rolls, and slider buns. Elongated items: Hot dog rolls, finger rolls, bridge rolls, submarine rolls, and miniature baguettes/batards up to 230mm long. 3. Why Bakeries Use It (Key Benefits): Massive Labour Savings: It can produce up to 6,000 rolls per hour (100 rolls every minute), a volume that would require a large team of bakers to do manually. Cost Efficiency (Oil-Free System): Unlike traditional dividers that require expensive food-grade divider oil to keep dough from sticking, the Novatek uses a completely dry, oil-free process. This saves thousands of pounds annually in oil costs and makes cleanup much easier. Product Consistency: Every roll comes out exactly the same weight (from 10g up to 208g in 2-row mode) and the same shape, which ensures uniform baking times and presentation. Physical Dimensions & Spatial Footprint: Standard Operating Footprint: Typically occupies a width of 0.8 m to 1.2 m and a base chassis length of 1.5 m to 2.5 m. Extended Length with Integral Pinner: When configured with the long-bed outfeed pinner/moulder belt assembly, the total inline workspace length requires approximately 3.2 m to 3.8 m to clear the outfeed table. Operating Height: Roughly 1.6 m to 1.8 m to the top rim of the bulk dough feed hopper to facilitate ergonomic manual or conveyor loading. Total Net Weight: Approximately 950 kg to 1,200 kg depending on the configuration of heavy-duty plunger blocks, internal moulding drums, and chassis reinforcement. Operational & Production Capabilities. Kdjdpez Ad Dcjfx Adlst Throughput Capacity: Processes up to 50 dough pieces per minute per row. For a standard 2-pocket (2-lane) configuration, this delivers a maximum output of 6,000 pieces per hour. Hopper Capacity: Features a standard integrated bulk dough conveyor hopper that accommodates 55 kg of raw dough. Scaling Ranges: 2-Row Operation: Scales between 10 g and 208 g simultaneously across both lanes. 1-Row Operation: Reaches 208 g to 500 g utilising lane blanking and larger interchangeable plunger blocks. Pinner Capabilities: Accurately stretches and shapes rounded dough pieces into finger rolls, hot dog buns, or miniature batards up to a maximum length of 230 mm. Utility & Facility Requirements: Electrical Supply: Requires a standard industrial 3-phase 400V, 50Hz electrical hookup.

Year of construction: 2024, operating hours: 150 h, condition: like new (used), functionality: fully functional, X AXIS (longitudinal) (mm) 7,500 Y AXIS (transversal) (mm) 1,280 Z AXIS (vertical) (mm) 640 A AXIS (vertical-horizontal rotation of the head) -90° ÷ +90° C AXIS (rotation on the vertical axis of the head) 0° ÷ 360° H AXIS (jaw positioning) (TKE 955 HP) (mm) 6,600 P AXIS (jaw positioning) (TKE 955 HP) (mm) 6,600 ELECTRIC SPINDLE Kdodpfx Asz Dpdujdlst Maximum power in S1 (kW) 11 Maximum power in S6 (60%) (kW) 13.5 Maximum speed (rpm) 24,000 Maximum torque in S6 (Nm) 10.7 Tool holder taper HSK – 63F Maximum blade diameter 400 mm

Year of construction: 2021, operating hours: 500 h, condition: like new (used), functionality: fully functional, DLyte PRO500 Dry Electropolishing System – Complete Set – Only 500 Operating Hours For sale: DLyte PRO500 by GPAINNOVA, a complete dry electropolishing / surface finishing system. The machine is in excellent condition, almost like new, with only approximately 500 operating hours. It has been used in a clean production environment and is fully functional. The set can be inspected and tested at our factory before purchase. Included in the set: * DLyte PRO500 machine * SMC Thermo Chiller HRS150-AF-40 * Original workpiece holders / fixture system, as shown in the photos * Mobile holder trolley / storage system * Accessories, as shown in the photos Machine details: * Manufacturer: GPAINNOVA / DLyte * Model: PRO500 * Article No.: GP4012691 * Serial No.: 200300-000081 * Year: 10/2022 * Weight: approx. 1600 kg * Rated power: 25 kW * Voltage: 400 Vac, 3P + N + GND * Frequency: 50–60 Hz * Rated current: 35 A * Full-load current: 40 A * Air supply: 6–7 bar Chiller details: * Manufacturer: SMC * Model: HRS150-AF-40 Ksdjziln Aspfx Adlsdt * Year: 2023 * Cooling capacity: 5 kW * Power supply: 3-phase, 380–415 V, 50/60 Hz * Refrigerant: R410A * Weight: approx. 177 kg Condition: * Very low usage: approx. 500 operating hours * Excellent technical and visual condition * Ready for production * Tests can be performed at our factory before purchase Price: €250,000

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 80 mm, number of axes: 3, overall weight: 5,200 kg, spindle motor power: 7,500 W, spindle speed (max.): 24,000 rpm, This 3-axis SCM Morbidelli UNIFLEX HP was manufactured in 2014. It features a working area of 3,000 mm in the X-axis and 1,300 mm in the Y-axis, with a maximum speed of 24,000 rpm. The machine is equipped with 2 milling spindles and a tool clamping system of HSK-F63. If you are looking to get high-quality CNC wood machining capabilities, consider the SCM Morbidelli UNIFLEX HP machine we have for sale. Contact us for further details. • Number of milling spindles: 2 • Tool clamping system: HSK-F63 • Vertical drill spindles: 96 • Horizontal drills (X/Y): 32 / 4 • CE mark Additional equipment • Barcode reader Ksdszuhcgjpfx Adlodt • Enclosed fence • Light barrier • DXF interface • Software: SCM XILOG PLUS

Condition: good (used), Year of construction: 2017, operating hours: 4,70,000 h, functionality: fully functional, machine/vehicle number: 1HA06A, overall weight: 2,200 kg, type of input current: three-phase, total width: 12,000 mm, total length: 40,000 mm, total height: 1,600 mm, power: 11 kW (14.96 HP), working width: 3,200 mm, number of ink cartridges: 6, used machine, working state Kjdpfx Asttunyodledt

Condition: excellent (used), SCM K560 HP Edge Bander Liquids Pre-milling cutters, Roller glue application, Replaceable tank Features a glue drain Pneumatic pre-trimming guillotine, Liquids Kdjdpfx Adszlta Sjlot Finished edge trimming knives Top-and-bottom milling unit (multi-cutter R1-R2), Corner rounding unit, Profile edge trimming cutter (multi R1-R2), Liquids Flat edge trimming cutter, Polishing unit The machine has CNC control Max. workpiece height 60mm Max. veneer thickness in roll 3mm, Feed rate 12 and 18 m/min Inspection and testing possible on-site

Condition: used, This listing is for 1 Thermo Scientific E1-clip tip Electronic Pipettes 15-1250ul The Thermo Scientific E1-ClipTip Electronic Pipette with a volume range of 15–1250 µL is available in both single-channel and multichannel configurations. Here are some options:​ Single-Channel Pipette: Volume Range: 15–1250 µL Tip Size: 1250 µL Channels: 1 Bluetooth Enabled: Yes Features: Programmable, adjustable tip spacing, compatible with Thermo Scientific ClipTip tips These pipettes are designed for precision and efficiency in laboratory settings, offering features like electronic tip ejection and Bluetooth connectivity for seamless data management. Physical & Chemical Standards Consumables & Equipment Chemicals Clinical Knowledge Base updated and consolidated product listing, integrating the new details into the previous content for a complete and professional overview: Thermo Scientific E1-ClipTip Electronic Variable 8-Channel Microliter Pipette; 15–1250 µL Capacity Item No.: 9282701 Pack Size: Each Weight: 0.96 kg Kdjdpfoxv Dubex Adlst Country of Origin: Finland

Condition: excellent (used), machine/vehicle number: 0841412556, Open Milk Cooling Tank FRIGOMILK G1 200 liters, 2 MILKINGS SERIAL NUMBER: 0841412556 TECHNICAL SPECIFICATIONS MANUFACTURE: - AISI 304 stainless steel inner tank and outer casing, on rollers; - maximum volume 212 litters, nominal 200 litters - diameter 784 mm; - total height 1800 mm; - total weight 77 kg; - voltage 1230 V; - max. pressure: 14 bar; - high side 28 bar; - nominal power 0.82 kW; - the compressor of the cooling unit is 0.5 HP; - Total primary Trapcold™ laser welded evaporator surface with maximum yield. Kodeild N Ropfx Adlodt - Very thick eco-friendly and performing insulation by polyurethane foam. - DN50 outlet - butterfly valve included. - Millimeters stainless steel dip-stick with direct reading of the milk-level in liters. COOLING SYSTEM: - Non-icing cools even with low filling level; - Direct expansion; - Refrigerant R404A - Stainless steel casing. - Compact and easy to install. ELECTRIC SYSTEM: - FIPO 0 electronic milk controller; - Milk temperature check and display; - Stirring program. - Electrical feeding cables with standardized plug (male). - 380V - Stainless steel elbow - 60 Hz Voltage Very good technical condition; Only for the Romanian companies, there is the possibility of selling in instalments, down payment, . Price Euro 2.300 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: like new (used), Year of construction: 2018, machine/vehicle number: 1000024667, functionality: fully functional, input voltage: 400 V, input current: 21 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 2,600 mm, workpiece width (max.): 900 mm, workpiece height (max.): 60 mm, workpiece weight (max.): 50 kg, total height: 28,840 mm, total length: 64,500 mm, total width: 21,320 mm, overall weight: 1,800 kg, Equipment: CE marking, documentation/manual, For sale: Biesse Brema Eko 2.1 CNC machining center. Machine from 2018, very little use. Operating hours: - Drilling head: 2883 hours - Electrospindle: 535 hours - Saw: 1253 hours Machine condition: Very good Program: bSuite3 The Biesse Brema EKO 2.1 is a compact and versatile CNC machine that enables the processing of parts of various thicknesses and sizes while taking up less space. It is an ideal solution for "just-in-time" production for craftsmen, small businesses, and for the production of special parts in large companies. Panel dimensions: Panel length (X): 200 – 2600 mm, Panel width (Y): 35 – 900 mm, Panel thickness (Z): 8 – 60 mm, Maximum panel weight: 50 kg. BH17 self-selecting drilling unit with 14 vertical spindles + 8 horizontal spindles + 1 120 mm diameter grooving saw, 5.5 kW (6 HP) electrospindle with ISO30 mounting, Kdsdpfsz Azbfsx Adljt Foot pedal for opening/closing the clamp Extensions for loading and unloading the table.

Condition: used, mileage: 1,21,459 km, power: 100 kW (135.96 HP), first registration: 09/2021, fuel type: diesel, overall weight: 2,800 kg, next inspection (TÜV): 08/2027, color: white, gearing type: mechanical, emission class: euro6, number of seats: 4, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Vehicle number (for inquiries): 195 Mercedes-Benz Vito 114 CDI MIXTO KOMPAKT. Single owner. Fully dealer-maintained exclusively at Mercedes-Benz (last service scheduled for 08/2025 at 116,646 km). Paint Code: * 9147 Paint color Arctic White MB 9147 Interior: * VF4 Caluma fabric, black Equipment: * 9147 Paint color Arctic White MB 9147 * BB7 CO2-optimized braking system * C447 - * C70 Pedestrian protection * CF9 Basic chassis Plus * CL4 Multifunction steering wheel with trip computer * E07 Hill-start assist * E1D Digital radio (DAB) * E2R Radio generation 2 * E34 Buffer battery for starting process * E3C Audio 30 * ED4 Fleece battery 12V 92 Ah * EL8 Two-way speakers, front * EW6 Pre-installation for Remote Services Plus * EY5 Mercedes-Benz emergency call system * EY6 Breakdown management * F447 - * F61 Interior mirror * F66 Lockable glove compartment * F68 Heated and electrically adjustable exterior mirrors * FF1 Center console with storage compartment * FKB Combi variant * FR1 Non-retractable rear view camera * FR8 Reversing camera * GC9 6-speed manual transmission Fsg 350 * H00 Warm/cool air duct to passenger area * H20 All-around heat-insulating glass * HH9 Semi-automatic climate control Tempmatic * HI1 Climate zone 1 (cold/comfort) * IB6 Model series C447 Vito/V-Class * IG5 Basic * IK0 Complete vehicle * IL1 Domestic (Germany) * IL4 Region EU/EFTA * IL5 Left-hand drive * IN1 Wheelbase 3200 mm, short overhang * J55 Seat belt warning device for front passenger seat * JA1 Warning lamp for windshield washer fluid level * JF1 Rain sensor * JH3 Communication module (LTE) for digital services * JK3 Instrument cluster with pixel matrix display Kdodpfox Rtaxjx Adlet * JW8 Attention Assist * JX2 Service interval 40,000 km * KB5 Main fuel tank 70 liters * KP6 SCR emission control generation 3 * L Left-hand drive * LA2 Light assistant * LD9 Rear compartment interior lighting * LE1 Adaptive brake light * LX2 3-month market rule * LX5 Europe * M44 Alternator 14 V/185 A * MG9 Generator management * MJ8 ECO start/stop function * MK8 Speed limitation 210 km/h * MS1 Cruise control * MT2 Emission class Euro 6D-TEMP N1 * MX0 BlueEFFICIENCY Package * MX8 Engine OM622 DE 17 LA 100 kW (136 HP) * Q22 Fixed-ball trailer coupling * R21 Wheel size group 1 * RF1 Tire brand Continental (10) * RG6 Tires 195/65 R16 * RM7 Summer tires * RS3 Steel wheels 6.5J x 16 * S00 Airbag control unit generation AB12 * S04 Adjustable passenger seat * SA6 Passenger airbag * SB1 Driver comfort seat * T14 Active retainer sliding door * T70 Child safety locks in passenger compartment doors * U60 Passenger compartment seating: 2-seater bench, 1st row * V30 Paneling of side wall in cargo/passenger compartment * V43 Wooden floor * VD2 Standard roof lining * VF4 Caluma fabric, black * VV9 Fixing points in roof frame * W16 Fixed window front left in side wall/sliding door * W17 Fixed window front right in side wall/sliding door * W65 Tailgate * W70 Tinted windows in rear compartment, privacy glass * WA0 Factory control code * WL9 Factory control code * WM0 Model update control code * WN7 Factory control code * X30 Registration certificate part 2 * X99 Manufacturer Mercedes-Benz AG * XC9 COC documents * XG6 Weight variant 2,800 kg * XI1 Change year G1-I * XM0 Model update * XM8 Ste...

Condition: excellent (used), a) Ref. VAC-1) Saw-Dust Collecting System “AIREX” (with fan - motor power HP 150) - Total air flow rate: 40,000 CFM (67,960 m³/h) b) Ref. VAC-2) Saw-Dust Collecting System “AIREX” (with fan - motor power HP 250) - Total air flow rate: 60,000 CFM (101,940 m³/h) Kdsdpfezx Eiljx Adlet

Condition: used, Year of construction: 1989, functionality: fully functional, overall weight: 5,000 kg, We offer this used Mazak ST 35 ATC MC CNC turning and milling center, manufactured in 1989. Kjdpfjz A Incjx Adlodt CNC lathe, brand MAZAK, model ST 35, manufactured in 1989, self-weight of 5 tons, equipped with a MAZATROL model T32-3 control, a KITAGAWA brand chuck, model B-12A0815 with a maximum pressure of 327 PSI, a KITAGAWA brand hydraulic cylinder, model F2078HS15A with a maximum speed of 3,000 rpm, as well as an automatic chip removal system, all accompanied by various manuals. Voltage: 220 V Frequency: 60 Hz Spindle power (rated): 26 hp Spindle power (continuous): 30 hp Machine serial number: 83298 Electrical diagram number: 112AAWA Main motor current: 102 A Full load current: 44 A Main switch current: 13/10 A Model: ST 35 ATC MC Serial number: 83496 Date of manufacture: June 1989 Weight: 5000 kg If you have any questions or need more information, please do not hesitate to send us a message or call us.

Condition: good (used), Year of construction: 2012, operating hours: 22,156 h, functionality: fully functional, machine/vehicle number: 5011358, turning length: 850 mm, travel distance X-axis: 250 mm, travel distance Z-axis: 600 mm, total height: 2,200 mm, total length: 5,000 mm, total width: 2,000 mm, overall weight: 6,000 kg, controller manufacturer: TRAUB, controller model: SYSTEM TX 8 i, input voltage: 400 V, input frequency: 50 Hz, input current: 80 A, nominal power: 36 kW (48.95 HP), Equipment: chip conveyor, TRAUB TNA 400 CNC turning machine Kdsdszxx Hwepfx Adlot - includes powered tool stations as well as Y and C axes - includes chip conveyor FCA D-63843 Niedernberg

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 00820002981, turning length: 800 mm, turning diameter: 500 mm, spindle speed (max.): 3,600 rpm, spindle bore: 118 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 30 m/min, bar passage: 102 mm, total height: 2,500 mm, total length: 8,000 mm, total width: 2,400 mm, overall weight: 10,000 kg, controller manufacturer: DMG, controller model: ERGOLINE, input voltage: 400 V, input frequency: 50 Hz, input current: 125 A, nominal power (apparent): 74 kVA, operating hours of spindle: 4,439 h, Equipment: chip conveyor, DMG MORI CTX BETA 800 TC CNC turning and milling center - Note: the spindle hours may increase slightly! - Swing diameter: 500 mm - Distance between centers: 1020 mm - Max. workpiece weight (chuck parts/chuck weight): 100 kg - Max. workpiece center of gravity from spindle flange: 120 mm - Travel X1: from -10 to 490 mm - Travel Y1: +-100 mm - Travel Z1: 845 mm - Travel Z2: 600 mm Kdedpfxezxx Dcj Adljt - Travel Z3: 800 mm - Spindle flange diameter: 220 H 5 mm - Chuck diameter: 315 mm - Diameter of front bearing: 160 mm - Rapid traverse speed, Z-axis: 40 m/min - Resolution, Z-axis: 0.001 mmm - B-axis max. swivel speed: 70 rpm - Angular resolution: 0.001° - Tailstock travel: 800 mm - Quill force: 8 kN The machine is equipped with a tailstock and a three-jaw chuck, diameter: 250 mm, as well as a chip conveyor and coolant system. FCA D-63843 Niedernberg - loaded onto a truck.

Condition: good (used), machine/vehicle number: 11528, Year of construction: 2014, operating hours: 9,150 h, load capacity: 4,990 kg, lifting height: 6,880 mm, free lift: 2,350 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 3,200 mm, battery voltage: 80 V, fork length: 2,400 mm, front tire size: 355/45-15, rear tire size: 21x8-9, overall weight: 8,091 kg, Equipment: 3rd hydraulic function, 5233296 Serial Number: 516330E00112 Kjdpfx Adjzp Hqxjlodt Battery Details: 80V 6PzS 930Ah BJ:2017

Condition: like new (used), Year of construction: 2023, operating hours: 4,837 h, functionality: fully functional, total length: 17,400 mm, total width: 1,970 mm, total height: 1,870 mm, cutting range round steel at 90°: 200 mm, type of input current: three-phase, overall weight: 2,300 kg, input voltage: 380 V, cutting range square steel at 90°: 200 mm, length stop: 8,000 mm, Equipment: documentation/manual, We are offering this like-new Jih-I Machinery JIH-NC24L circular saw for non-ferrous metals and aluminum, manufactured in 2023. Model: JIH-NC24L Serial number: N24L022C056 Date of manufacture: 20220826 Voltage: 380 V Frequency: 50 Hz Number of phases: 3 Power: 15 HP 8-meter infeed table 6-meter outfeed table If you have any questions or would like more information, please feel free to send us a message. Ksdezzp Epspfx Adlodt

Condition: used, Year of construction: 1972, Second-hand machine Year of manufacture: 1972 Features and technical specifications: - Pressing surface 2500 x 1100 mm - Total pressing force: 650 kN - Opening width: 400 mm - Number/diameter of cylinders: 4/80 mm - Operating pressure: 325 bar - Closing time: approx. 16 sec. - Panel type: aluminium / natural - Thickness: approx. 51 mm - Power rating per heating plate: approx. 6.8 kW - Heating-up time to 90°C: approx. 16 mins. - Dimensions: 2900 x 1300 x 2050 mm Kdodszk N U Nspfx Adlet - Weight: approx. 2,900 kg Availability: at short notice Storage location: 63934 Röllbach

Condition: ready for operation (used), Year of construction: 2013, This 5-axis SCM Stefani MD HP edgebander was manufactured in 2013. It features a robust steel construction, high-frequency motors, and a "Startouch" control system with a 12" touchscreen. Capable of handling solid wood edges up to 15 mm and rolls up to 3 mm, it includes a pre-milling unit, interchangeable glue pot, and a feed speed of 25 m/min. Consider the opportunity to buy this SCM Stefani MD HP edgebander. Contact us for more information. • Machine maintained and serviced • Edge banding machine for single-sided edge application • Heavy-gauge steel construction • High-frequency motors • Protective hood over all units after the gluing station • Spacer on the rotary control panel • Panel feeding via chain feed • “Startouch” control system with 12" color touchscreen • Solution MD-HP "T-ER4S" version • Capabilities: solid wood edges up to 15 mm; edge rolls up to 3 mm • Feed speed: 25 m/min • Pre-milling unit RT-E (entry spindle with diamond cutters) • Gluing unit VC-S4 / QMS with interchangeable Teflon-coated glue pot • iGlue device • EVA pre-fusion • Motor-driven feed rollers, interchangeable (needle roller for solid wood, plastic rollers) • 3 pressure rollers, one motor-driven • Two-motor pressure units: straight and inclined • Anti-adhesive agent spray unit AAR for edge finishing • Scraper and edge scraper unit • Cloth polishing unit Ksdpfx Adjzug Sgsledt Additional equipment • Anti-adhesive and polishing liquids

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: 03814V2200, functionality: fully functional, operating hours: 2,416 h, input voltage: 380 V, type of input current: three-phase, travel distance X-axis: 2,200 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 280 mm, number of slots in tool magazine: 1, total height: 2,400 mm, total length: 3,000 mm, total width: 1,200 mm, overall weight: 1,100 kg, table length: 2,200 mm, table width: 280 mm, coolant supply: 3 bar, feed length X-axis: 2,200 mm, feed length Y-axis: 1,200 mm, feed length Z-axis: 280 mm, feed rate X-axis: 7 m/min, feed rate Y-axis: 7 m/min, feed rate Z-axis: 6 m/min, spindle motor power: 4,500 W, number of spindles: 1, rapid traverse Z-axis: 6 m/min, rapid traverse X-axis: 7 m/min, rapid traverse Y-axis: 7 m/min, rotational speed (max.): 18,000 rpm, rotational speed (min.): 1,000 rpm, spindle speed (max.): 18,000 rpm, spindle speed (min.): 1,000 rpm, table height: 1,200 mm, Equipment: rotational speed infinitely variable, NUMERICALLY CONTROLLED PANTOGRAPH WITH VERTICAL PLANE MODEL "VERTICAL 2200 OPEN" WITH 3 INTERPOLATED AXES FOR WORKING MARBLE AND GRANITE basic assembly: - range: x-axis=2200 mm. y-axis=1200 mm. z-axis=300 mm; - work surface L. 2500 x H. 1250 mm; - heavy carpentry-made structure in processed and painted steel; - Side openings with loops, both on the left and on the right, for processing oversized blocks with support rolls; - slabs and carter support in inox steel; - highly deep workbench made with extruded aluminium profile ; - slab locking with n°2 clamps with mechanical blocking device; - three-phase electro spindle hp 5 1/2 gas connection with perforated shaft and rotating joint for water passage for internal and external tool refrigeration, and inverter for variation to maximum 18000 r.p.m .; - openable polycarbonate protection for electro-mandrel, with safety micro; - axes movement by means of runners and sliding blocks of balls recircle; - dust tents for total protection of all moving parts; - water cooling tool system with centralized drain, including pump, decanting tanks and locking electrovalve; - electronic panel with console comprising numeric control, pc and monitor. Windows software included ARTCAM INSIGNA: - carrying out of reliefed and engraved writing, using all "true Type" fonts; - cad for carrying out drillings, cuts, engravings, millings and inlays; - import of most common types of files as dxf and dwg to create writings, drawings and stamps, reliefed and engraved logos, showr trays, sinks, arcs and portals; - automatic drilling for inserting bronze letters; - carrying out single and multiple sculptures in high and bas-relief; automatic switch off; 3D PLAN LASER laser copyng system to import manufactured products and tree-dimansional figures (bas and hight - relief) with interface and software for required dimensions Kdodpsygxc Aefx Adlst

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 08120055, measuring range X-axis: 440 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 410 mm, workpiece weight (max.): 227 kg, total height: 2,320 mm, type of input current: AC, total width: 1,160 mm, total length: 1,030 mm, travel distance X-axis: 440 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 410 mm, overall weight: 293 kg, input voltage: 220 V, table height: 930 mm, travel speed (max.): 21,000 mm/min, repeat accuracy: 0.003 mm, table load: 227 kg, compressed air connection: 4 bar, year of last overhaul: 2025, Equipment: documentation/manual, type plate available, TESA MH3D DCC coordinate measuring machine (CMM) for sale in very good, well-maintained condition and ready for immediate use. Features: PC-DEMIS Pro for Windows Version 4.2 MR4 Release software (legally transferable) Current calibration and maintenance performed on 09/09/2025 Renishaw MH20i / TP-ES probing system Includes several probe extensions and accessories Including EM1 extension exchange module, L=70 mm (new price 07/2025: €1,255 net) 1x TP20 SF probe module (standard probing force) 1x TP20 EF probe module (high probing force for long probe combinations) Functional HP computer included Calibration and measurement records available Operating manual on CD Additional, functional Renishaw Brown & Sharpe TP-ES probe head Original TESA Star-i probe head (defective) Additional Renishaw MIP probe head (probably defective) Various styli included (see pictures) Condition: Granite table in very good condition Axes run smoothly and precisely No problems with the air bearings Machine has been regularly serviced Used only in a metrology laboratory Immediately ready for production and measurement Typical wear marks present on one side of the guide rail; purely cosmetic and without any technical restrictions Kdjdpjy Taixjfx Adlst Air bearings run smoothly, without jolts, and precisely Calibration is current and within specification Inspection and functional demonstration possible by arrangement. Suitable for quality assurance, incoming goods inspection, manufacturing metrology, toolmaking, CNC machining, or metrology service providers.

Condition: refurbished (used), Year of construction: 2025, GHD Hartmann EC 101 i Automatic clips bag closing unit, fully refurbished and retrofitted. Pneumatics, mechanics, and electrics have all been overhauled. Capacity: up to 60 pcs/min (3,600 pcs/hour) Product dimensions: Length: up to 400 mm Width: up to 220 mm Height: up to 120 mm Kdjdpfxsx Dmnge Adlot

Year of construction: 2007, condition: used, functionality: fully functional, The ELDAN FG952 is an industrial, high-speed, single-shaft granulator designed to further reduce the size of materials after primary shredding, down to a specified granule size. The material is fed into the cutting chamber, where a rotating rotor with moving blades interacts with stationary blades. The granulated material passes through a replaceable screen, allowing for the selection of the desired final fraction size. The unit features an adjustable blade gap, multiple blade sharpening options, easy blade replacement, and a hydraulic opening for the feed hopper, which facilitates access to the cutting chamber during maintenance. Replaceable wear parts and screens with different hole sizes are used. Kdodpfjz Dgrvox Adlst Electric motor power: 75 kW / approximately 100 HP Rotor length: 950 mm Rotor speed: 475 rpm Moving ("flying") blades: 12 pcs. Stationary blades: 4 pcs. Capacity up to 3,500 kg/h Approximate weight 4,400 kg Length: 1,940 mm Width: 1,960 mm Height: 2,800 mm Motor rated speed: 1,480 rpm Standard electrical grid: 3 phases, 400 V, 50 Hz The FG952 can be used to granulate various materials, including: tires and rubber; electrical and other cables; aluminum scrap; plastics; various secondary raw materials after primary shredding.