Used Weinig 250/120 for sale (18,721)

Condition: as good as new (ex-display), Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! CAN SHARPEN MAX 406MM DIAMETER CUTTERS !!! The G-716 Semi-automatic Cutterhead Grinder is used to sharpen 178mm to 406mm diameter eased edge, milled to pattern, and fingerjoint cutterheads. Worktable traversing is automatic and has adjustable stops. Cutterhead indexing is manual. Each knife is held against a positive stop while being ground !!! No Index Plate To Change No index plate to change when working with heads with different numbers of knives. The use of an index plate assumes that the knives and head separations are uniform throughout, which is often not the case. If the height of the knife is high or low, then the front face of the knife will vary from knife to knife making the task of grinding difficult. The one constant is the back face of the knife, therefore the use of an indexing stop against the back face will provide for accurate indexing regardless of the irregularities in the knives and head slots. Head Indexing and Wheel Feed: Manual Minimum / Maximum Diameter Cutterhead: 7″ Min./16″Max. 178mm Min./ 406mm Max. Worktable Feed: Air / Oil Travel (maximum): Bwjdpfx Aoq Dzi Tjiksr 12″ 305mm. Adjustable Limits: Proximity Switch Speed: Fully Adjustable Index Method: Manual index after each knife is ground. Grinding Spindle: 1-1/2 HP Wash Down Duty TEFC Motor 3600 RPM, Dual ABEC 7 Precision Bearings, with Sealed Lubrication. 8″ (203mm)Diameter Grinding Wheel (9″ 229mm Diameter Max.) Coolant System: 15 Gallon Tank with Casters, Sediment Tray Full View Sight Glass, 5 GPM Pump (120VAC) Wash Down Hose Included Specifications Grinds 7″ to 16″ diameter eased edge, milled to pattern, and finger joint heads Automatic traversing worktable with adjustable travel limits Manual indexing of knives against a positive stop with grinding position pneumatic brake allowing precision indexing without the need of an index plate High precision 1-1/2 HP grinding spindle with sealed lubrication Recirculating adjustable flow flooded coolant system with wash down hose Fully enclosed grinding chamber with viewing windows and task light Grinding wheel feed allows unattended operation. New Proscale.

Condition: excellent (used), Year of construction: 2012, Weinig H1000 moulder with E3 infeed and A3 outfeed mechanisation Weinig Hydromat 1000 with 5 Spindles. (Year 2012) Separate electrical panel Separate remote control panel Automatic lubrication system for bedplates Memory system Full sound enclosure Weinig E3 moulder infeed +pack scissors lift (3000kg). Weinig A3 drop leaf outfeed + pack scissors lift (3000kg) + pack outfeed chain conveyor. WEINIG HYDROMAT 1000 230X160mm maximum dimension No 1. 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer No 2. 7.5kw - Right 6000rpm + profile jointer No 3. 7.5kw - Left 6000rpm + profile jointer No 4 . 7.5kw - Top 6000rpm + Outboard bearing + Straight jointer No 5 . 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer 50mm spindles Beam 0.55kW Full documentation included. Extraction manifold included. POSSIBLE TO PURCHASE MOULDER OR MECHANISATION SEPARATELY AS NEEDED Bwodpfx Aisy Sgzxoksr

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 102940, WEINIG HYDROMAT H23 ELECTRONIC FEED FREQUENCY CONTROLLED (8 – 100 M/MIN). FEED MOTOR 22 KW 50MM SPINDLES WORKING WIDTH MAX. 230 MM WORKING HEIGHT MAX. 160 MM SHORT INFEED WITH 220MM TOP FEED ROLLERS BOTTOM 15KW 6,000 RPM, OUTBOARD BEARING, JOINTER READY RIGHT 11KW 6,000 RPM JOINTER READY LEFT 15KW 8,000 RPM JOINTER READY RIGHT 11KW 8,000 RPM JOINTER READY LEFT 15KW 8,000 RPM, JOINTER READY Bsdpfozd Tavsx Aikowr TOP 18.5KW 6,000 RPM OUTBOARD BEARING, JOINTER READY BOTTOM 11 KW 6,000 RPM OUTBOARD BEARING, JOINTER READY (STRAIGHT JOINTER) + OUTBOARD BEARING TOP 18.5KW 8,000 RPM OUTBOARD BEARING, JOINTER READY (STRAIGHT JOINTER) + OUTBOARD BEARING BOTTOM 22 KW 6,000 RPM OUTBOARD BEARING, JOINTER READY 12X TOP FEED ROLLERS (2X 220MM + 10X 140MM) 7X BOTTOM FEED ROLLERS POSSIBLE TO ADD ADDITIONAL STRAIGHT / PROFILE JOINTERS AS NEEDED AUTOMATIC LUBRICATION SYSTEM FULL DOCUMENTATION INCLUDED MACHINE LENGTH 5.2M

Condition: excellent (used), WADKIN SILHOUETTE STRAIGHT AND PROFILE GRINDER TWIN GRINDING HEAD:  A CENTRAL DESIGN FEATURE THAT ALLOWS FOR EXTREMELY FAST CHANGES BETWEEN PROFILE GRINDING AND STRAIGHT KNIFE GRINDING OR RESHARPENING. CAPACITY:  Bedoyxxgmopfx Aikowr IT FEATURES A FULL 300 X 350MM GRINDING CAPACITY. PRECISION TOOLING:  USES A UNIQUE TURRET HOLDER THAT CAN HOLD UP TO SIX STYLI, ALLOWING FOR QUICK SETUP ACROSS VARIOUS WORK TYPES. ADJUSTABILITY:  THE TEMPLATE SLIDE INCLUDES COARSE AND FINE ADJUSTMENT VIA DIAL INDICATORS FOR HIGH-ACCURACY POSITIONING. COMPACT DESIGN:  BUILT WITH SPACE-SAVING FEATURES TO FIT INTO SMALLER TOOLROOMS WHILE MAINTAINING THE ACCURACY OF LARGER AUTOMATIC MACHINES. INCLUDED: 40MM OR 50MM ARBOR AS NEEDED OPTICAS SETTING STAND

Condition: excellent (used), Year of construction: 2015, WEINIG ISEL 3020 XYZ CNC TEMPLATE MAKER TOOL FOR PROFILE GRINDER TECHNICAL DATA: CNC ROUTER WITH 3 AXIS MOVEMENT CLAMPING T SLOT TABLE CADCAM TEMPLATE MAKING SOFTWARE INCLUDED PC, SCREEN AND KEYBOARD INCLUDED FULLY ENCLOSED WORKING AREA WITH LOCKING DOOR SYSTEM LARGE CAPACITY WORKING AREA LOW VOLTAGE INTERNAL LIGHTING SET OF MOTOR COLLETS AND SPANNER SET TRAVEL AREA 300 x 200 MM Z AXIZ TRAVEL 90 MM Bwedpfx Aisyxxnwskor SPINDLE SPEED 11000 & 25000 RPM DIMENSIONS 650 MM (L) x 610 MM (W) x 715 MM (H)

Condition: excellent (used), WEINIG UNISTACKER PATERNOSTER STACKER WITH ADDITIONAL HANDLING EQUIPMENT OFFER INCLUDES 1. WEINIG 820 RIGHT ANGLE TRANSFER CONVEYOR. 2. WEINIG (5 BELT) 8M LONG SORTING STATION FEEDING TO PATERNOSTER STACKER. 3. WEINIG 811 UNISTACK PATERNOSTER STACKER. 4. 3X STICK MAGAZINES 1200MM. MINIMUM LENGTH APPROXIMATELY 500MM. MAXIMUM LENGTH 3100MM. Bwedpfjy D Akaex Aiksr PACK WIDTH 1200MM PACK HEIGHT 1200MM MAX. CAPACITY 5 LAYERS PER MINUTE 4. WEINIG 802 SCISSORS LIFT ROLLER CONVEYOR FEEDING TO PACK OUTFEED. 5. WEINIG 812 POWERED ROLLER CONVEYOR OUTFEED. 6. WEINIG CHAIN PACK OUTFEED CONVEYOR

Condition: excellent (used), Year of construction: 2015, Weinig Powermat 2400 moulder with 7 Spindles. (Year 2015) Working height: 10 - 160 mm . Working width: 20 - 230 mm. Bjdpfx Aeyl Rmkjikswr 50mm spindles 6,000 RPM (Not Powerlock) Bottom 15 kW + outboard bearing Right 11 kW + Straight jointer Left 11 kW + Straight jointer Top 15 kW + Straight jointer + outboard bearing Bottom 18.5 kW + Profile jointer Top 18.5 kW + Straight + Profile jointer Bottom 18.5 kW Straight jointer + outboard bearing 11kW feed motor, 60m/min. Heavy duty feed works. 10x top feed rollers. First top feed roller with clutch installed for use with mechanisation. 5x bottom feed rollers. Automatic lubrication system. Electric digital display memory system. CNC POSITIONING ON SPINDLES 3, 5 & 8 Possible to supply with Weinig moulder infeed and outfeed

Condition: good (used), Weinig Hydromat H23 8 spindle 50mm spindles 6,000 RPM Bottom 7.5kW jointer ready Right 7.5kW straight jointer ready Left 15kW straight and profile jointer ready Right 11kW profile jointer ready Top 15kW jointer ready Bottom 18.5kw jointer ready Top 11kw straight and profile jointer ready + outboard bearing Bottom 7.5 kw straight and profile jointer ready + outboard bearing 7.5kW feed motor. Automatic lubrication system. Bodpfx Aisxgq Rwjkowr Full heavy duty sound enclosure Possible to supply with moulder infeed and outfeed as needed. Possible to offer tooling if needed.

Condition: good (used), WEINIG UNIMAT 23EL 9 SPINDLE SHORT INFEED TABLE 1: BOTTOM 7,5KW 2: RIGHT 11 KW 3: LEFT 7,5 KW 4: RIGHT 7.5 KW 5: TOP 11 KW 6: BOTTOM 7,5 KW 7: TOP 11 KW 8: BOTTOM 11 KW 9: UNIVERSAL 7,5 KW 360° TILTABLE 8000 RPM SPINDLES. FEED MOTOR 7.5 KW Bwedpfx Aoyahuboikjr MAX FEED SPEED 44M/MIN 13 x DRIVEN TOP FEED ROLLERS 6 x DRIVEN BED FEED ROLLERS AUTOM. BED LUBRICATION PNEUM. POWERED SIDE PRESSURE ROLLERS PNEUM. POWERED HOLD DOWN ON 6+8 DIMENSION: APPR 5000 X 2000 X 1800 MM WEIGHT: APPR. 6500 KGS DUSTHOODS: 9 x 140 MM DIAMETER EXTRACTION MANIFOLD INCLUDED FULL DOCUMENTATION INCLUDED

Condition: good (used), Year of construction: 2000, Weinig High Mech E6 infeed + A5 outfeed + stacker 1. Weinig pack infeed roller conveyor. 2. Weing pack tilt 3. Weinig flat chain cross feed conveyor with single board feeder. 4. Weinig reject sorting unit with roller tracks. 5. Weinig EM814 moulder infeed with flat chain feeder. 6. Weinig outfeed 3m belt accelerator conveyor. 7. Roller conveyor with cross feed chain kickers. 8. Weinig cross feed buffer belt conveyor. 9. Weinig flat chain stacker with scissors lift roller conveyor. 10. Weinig pack outfeed roller conveyors. Possible to offer with additional Weinig bundling system if needed. Bjdewgbw Rspfx Aikewr

Condition: used, Stehle HK 630 (semi-automatic straight knife grinder). Specification: • Maximum tool width 630 mm !!! • Tool diameter planer heads (min-max knife heads) 120 - 340 mm • Grinding wheel spindle speed 2850 rpm Bsdpfx Ajv T Rkhoikswr • Grinding wheel drive 1,1 kW • Clearance angle 10 - 35° • Coolant tank 28 L • Motor coolant pump 0,28 kW • Connection values, total 2 kW Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!!

Condition: good (used), Weinig Hydromat H23 8 spindle 50mm spindles 6,000 RPM Bottom 7.5kW jointer ready Right 7.5kW straight jointer ready Left 15kW straight and profile jointer ready Right 11kW profile jointer ready Top 15kW jointer ready Bottom 18.5kw jointer ready Top 11kw straight and profile jointer ready + outboard bearing Bottom 7.5 kw straight and profile jointer ready + outboard bearing 7.5kW feed motor. Bwjdjy Sgy Uepfx Aiksr Automatic lubrication system. Full heavy duty sound enclosure Possible to supply with moulder infeed and outfeed as needed. Possible to offer tooling if needed.

Condition: good (used), With the OptiControl instrument measuring system from WEINIG, you can optically measure drills, PowerLock and hydraulic instruments and transmit the highly accurate measurement results to the woodworking machine. The device's 20x optical magnification ensures accurate measurement results. The measurement results are transmitted to the planer via a computer and the PowerCom software. The machine can also create completely new profiles. Bwodpfjyl Rm Rex Aikjr OptiControl PowerCom offers you: measuring instruments recording data from measured instruments creating new profiles Online data transmission optimization of work tasks time saving when setting up the planerTool measuring stand for measuring tool radius and height. Measurements can be read of digital read-outs. Technical details Tool diameter min - 100mm Tool diameter max - 300mm Tool length maximum - 330mm 220v - 50hz Weight - 180 kg Supplied with operating instructions.

Condition: excellent (used), Year of construction: 2015, Weinig Powermat 2400 moulder with 7 Spindles. (Year 2015) 50mm spindles 6,000 RPM (Not Powerlock) Bottom 15 kW + outboard bearing Right 11 kW + Straight jointer Left 11 kW + Straight jointer Bwjdpfey Auvfsx Aiker Top 15 kW + Straight jointer + outboard bearing Bottom 18.5 kW + Profile jointer Top 18.5 kW + Straight + Profile jointer Bottom 18.5 kW Straight jointer + outboard bearing 11kW feed motor Automatic lubrication system. Electric digital display memory system. Possible to supply with Weinig moulder infeed and outfeed

Condition: good (used), Year of construction: 2000, Weinig High Mech E6 infeed + A5 outfeed + stacker Bwedpfx Aioy Auvxjkor 1. Weinig pack infeed roller conveyor. 2. Weing pack tilt 3. Weinig flat chain cross feed conveyor with single board feeder. 4. Weinig reject sorting unit with roller tracks. 5. Weinig EM814 moulder infeed with flat chain feeder. 6. Weinig outfeed 3m belt accelerator conveyor. 7. Roller conveyor with cross feed chain kickers. 8. Weinig cross feed buffer belt conveyor. 9. Weinig flat chain stacker with scissors lift roller conveyor. 10. Weinig pack outfeed roller conveyors. Possible to offer with additional Weinig bundling system if needed.

Year of construction: 2000, condition: excellent (used), Weinig High-Mech A4 bundling system Bundle forming packaging unit possible to combine with other Weinig outfeed handling systems available from stock such as buffers and stackers. Consisting of Bedpfx Aioq Rvrbskowr 1. Weinig 815-300 high speed bundling unit 2. Weinig 812-200 outfeed roller conveyor with crossfeed 3. Control panel with Siemens S7-300 CPU

Condition: excellent (used), Weinig Hydromat 23C with 6 Spindles. Max width 245mm Max Thickness 160mm Separate electrical panel. Separate remote control panel Automatic lubrication system for bedplates Full heavy duty sound enclosure. 15kW feed motor 100m/min No 1.  11kw - Bottom 6000rpm straight jointer prepared No 2. 11kw - Right 6000rpm straight and profile jointer prepared No 3. 15kw - Left 6000rpm straight and profile jointer prepared No 4 . 15kw - Top 6000rpm + Outboard bearing + straight and profile jointer prepared No 5 . 30kw - Top 6000rpm + Outboard bearing + straight and profile jointer prepared No 6 . 15kw - Bottom 6000rpm + Outboard bearing + straight and profile jointer prepared Bedpfoyl Rmqex Aikjwr 50mm spindles Beam 0.55kW Full documentation included. Heavy duty sound enclosure. Possible to supply with hydro tooling if needed. Possible to supply with full mechanisation if needed.

Condition: like new (used), Tool measuring stand for measuring tool radius and height. Measurements can be read of digital read-outs. Technical details Tool diameter min - 100mm Tool diameter max - 300mm Bodpfxjyl Rnbs Aikjwr Tool length maximum - 330mm 220v - 50hz Weight - 180 kg Supplied with operating instructions.

Condition: good (used), 6 Head Multi-head Horizontal Bandsaw Saw pulley diameter: 915mm Sawblade width (max): 100mm Standard saw speed 35m/s Timber width Max: 305mm – 450mm Bwjdpsy Hb Ucjfx Aiker Maximum opening saw to chain bed: 305mm Feed chains to saw lines 292mm Main motor: 6x 18.5kw Feed speeds (variable): 15 – 60m/min std, 7.5 – 30m/min (optional) Type of feed: internal overhead feed system with driven chains synchronised with chain bed Operators control station including speed control and start stop controls Working height 800mm

Condition: excellent (used), Year of construction: 2012, Weinig H1000 moulder Weinig Hydromat 1000 with 5 Spindles. (Year 2012) Separate electrical panel Separate remote control panel Automatic lubrication system for bedplates Memory system Full sound enclosure No 1. 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer No 2. 7.5kw - Right 6000rpm + profile jointer No 3. 7.5kw - Left 6000rpm + profile jointer No 4 . 7.5kw - Top 6000rpm + Outboard bearing + Straight jointer No 5 . 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer 50mm spindles Bwedpfx Aoy Aux Hoikor Beam 0.55kW Full documentation included. Extraction manifold included. Possible to supply with Weinig mechanisation if needed (Year 2012)

Condition: excellent (used), Year of construction: 2012, Weinig E3 infeed and A3 outfeed E3 Infeed Scissors lift before crossfeed. Crossfeed table to infeed accelerator. Moulder infeed accelerator. A3 Outfeed Drop leaf. Crossfeed belt conveyor. Scissors lift with pack chains. Bwjdpox Rblpefx Aiksr pack outfeed chains.

Condition: excellent (used), Marinus Machines V&G 400 Series, Through Feed End Matching Machine suitable for fixed or random lengths as needed Maximum working length up to 6m, Minimum working length: 500m/m Total Power: Appr: 32kw, Tooling included. 400v 50hZ Bedpfx Asydii Ioikswr 20 pieces per minute possible depending on length. PLC Controls. Complete Safety Enclosure.

Condition: excellent (used), Year of construction: 2012, Weinig E3 infeed and A3 outfeed E3 Infeed Scissors lift before crossfeed. Crossfeed table to infeed accelerator. Moulder infeed accelerator. A3 Outfeed Drop leaf. Bedey Auvrjpfx Aikswr Crossfeed belt conveyor. Scissors lift with pack chains. pack outfeed chains.

Condition: ready for operation (used), Year of construction: 2015, Weinig Powermat 700 6x 40mm Spindles. CNC on spindles 3, 4 and 5. Width 20-230mm Height 10-160mm Memory system Automatic lubrication system for bedplates. No 1.  11kW - Bottom 7000rpm Bwodpoyub Nnefx Aiksr No 2. 7.5kW - Right 7000rpm No 3. 7.5kW - Left 7000rpm No 4. 15kW - Top 7000rpm No 5 . 11kW - Top 7000rpm No 6 . 11kW - Bottom 7000rpm Electronically variable feed. 40m/min Short infeed table. Marathon coating for machine bed plates. Manuals & hand tools.

Condition: excellent (used), LOG CABIN MILLING MACHINE FOR PRODUCING CHALET CORNER JOINTS BY MILLING FOUR SIDES OF THE LOG BEAM. MAXIMUM LOG LENGTH 6000MM (DISTANCE BETWEEN 5770 MM) MINIMUM LENGTH 450 MM 4X MILLING HEADS PER SIDE (2 SIDES) CAPABLE OF 3 CYCLES PER MINUTE MAXIMUM WIDTH 250 MM MAXIMUM THICKNESS 140MM SUPPLIED WITH ADJUSTABLE TOOLING SUITABLE FOR 34MM TO 70MM JOINTS 8X 4 KW MILLING MOTORS DIGITALLY DISPLAYED LENGTH MEASUREMENT SYSTEM SIMPLE ELECTRONIC CONTROLS (NO PLC) 5,5 KW FEED MOTOR POSSIBLE TO SUPPLY WITH STACKING UNIT AFTER IF NEEDED Bwedpfoy Sgx Rox Aiksr MODIFIED LEFT SIDE TO ALLOW CHALET ROOF OVERHANG LENGTH AS NEEDED VERY GOOD QUALITY KNOTCHING PRICE DISMANTLED AND LOADED TO TRUCK