Used Wmw Heckert Geared Table Drill for sale (26,436)

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel gray cast iron Table unit with clamping plate and very solid guideway Table clamping surface 5500 x 2000 mm Travel of the table clamping plate approx. 3100 mm Table height 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single-start) - Processing table guided very stably on the bed - Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine - Longitudinal table movement via ball screw and SIEMENS servo motor Ndjdpethuzpsfx Aiyoa - Clamping surface with 11 T-slots 28 mm - Drive via SIEMENS 1FT6134-6AB71-1AG2 servo motor with IC200448S/R encoder (RN 000 B25) Total length 9500 mm Width 2000 mm Overall height 1050 mm dead weight 28 ton. good condition

Condition: used, Universal Tool Milling Machine DECKEL Type FP 1 Universal Milling Machine Machine No. 2101 - Year of manufacture: 1979 Travel (manual) X: 300 mm, Y: 160 mm, Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40-2000 rpm, 16 steps Feed X and Y axes: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.4 / 1.8 kW, pole-changeable Power supply: 380 Volt, 50 Hz - Stepless feed in X and Z axes - Spindle speed via 2 motor speeds and 8 gearbox stages - Quill stroke at the vertical milling head: 60 mm - Vertical milling head tiltable and horizontally extendable by 100 mm - Fixed angle table 600 x 210 mm - Coolant system in the machine base Nedsr D T U Dspfx Aiyoda - Separate control cabinet - Original chip tray mountable on machine base - Wiring diagram available Space required (L x W x H): 1350 x 1100 x 1700 mm Weight: 770 kg In very good condition

Condition: excellent (used), For sale: SEW-EURODRIVE RF17 DT63L4/B03 geared motor with a three-phase motor with a power of 0.25 kW and a built-in electromagnetic brake. The unit is fully functional, tested, and ready for operation. The technical and visual condition is good. Normal signs of use resulting from operation are visible. The scope of sale includes exactly what is shown in the pictures. Technical data: Manufacturer: SEW-EURODRIVE Ndjdpfx Aoznn E Isiyoa Model: RF17 DT63L4/B03 Power: 0.25 kW Supply: 3× 230 V Δ / 400 V Y, 50 Hz Motor speed: 1300 rpm Output speed: 94 rpm Torque: 25 Nm Gear ratio: i = 13.84 : 1 Brake: 230 V AC, 3.2 Nm Protection class: IP54 Insulation class: B Operating mode: S1 Design: IM B5 Weight: 10.84 kg Country of manufacture: Germany

Condition: excellent (used), For sale: SEW-EURODRIVE R40 DT80K4/BMG geared motor with a three-phase electric motor and built-in electromagnetic brake. Nedpfx Aoznu Ipoiysda The unit is fully functional, tested, and ready for operation. Its technical and visual condition is good. Normal signs of wear resulting from use are visible. The geared motor is ideally suited for driving conveyors, feeders, production machines, and other industrial equipment. Technical data: Manufacturer: SEW-EURODRIVE Gearbox type: R40 Motor type: DT80K4/BMG Power: 0.55 kW Power supply: 3×230 V Δ / 400 V Y, 50 Hz Motor speed: 1360 rpm Output speed: 53 rpm Brake: 230 V AC, braking torque 5 Nm Protection class: IP54 Insulation class: B Weight: 20.12 kg

Condition: new, Holzprofi Maker Special Column Drill M1-BM4117S-Variotouch with Stepless Speed The brushless motor is directly controlled without a belt drive! It features an electronic control system with a combined chip and software control system. It features a touchscreen display, thread cutting device, automatic start and stop function when the spindle is operated, forward/reverse rotation, LED light, and cross-line laser. With extra robust table - also suitable for vices. Technical data: Motor power 1.6 kW (= 2 kW S6) Motor voltage 230 volts Quill taper MT 3 Quill stroke 120 mm Drill chuck 3-16 mm Speeds 150-3200 rpm Ndjdpfox H Ukkjx Aiyea Column diameter 80 mm Table dimensions 345 x 345 mm Base dimensions 520 x 320 mm Table tilt 90° left/right

Condition: used, Year of construction: 2007, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting width (max.): 1,250 mm, saw blade diameter: 450 mm, tilt adjustment saw blade: 45 °, height adjustment type: electric, – Year of production: 2007 – Austrian manufacture TECHNICAL SPECIFICATIONS: – Total power: 7.35 kW – Max. saw blade diameter: 450 mm – Min. saw blade diameter: 250 mm – Scoring blade diameter: 125 mm – Pro Gline carriage guides – Carriage length: 2,800 mm – Fence with two stops – Cutting width to the right: 1,250 mm – Three spindle speeds: 3,500 / 4,500 / 5,500 RPM – Main motor power: 5.5 kW – Electric height adjustment of cut – Electric angle adjustment of cut – Electric setting of cutting width on the right side – Automatic scoring unit advance – Extraction port diameters: 100 mm and 120 mm Transport dimensions: Nedpfx Aijymz Uboysda – Length: 290 cm – Width: 230 cm – Height: 180 cm – Weight: approx. 1,000 kg

Condition: excellent (used), For sale: Mannesmann Demag AF06-L-M-0-145-1 geared motor with a three-phase Demag ZBA90 A4 B020 motor. The unit is fully functional, tested, and ready for operation. The visual condition is good, with normal signs of use. Notes: * One mounting lug has been cut – this does not affect the operation or correct mounting of the geared motor. * There is a small crack on the plastic motor cover, which does not affect the operation of the unit. Technical data: Ndedpfxezpbufj Aiyea Manufacturer: Mannesmann Demag AG Gearbox model: AF06-L-M-0-145-1 Motor model: Demag ZBA90 A4 B020 Power: 1.1 kW Supply: 3×400 V AC, 50 Hz Brake voltage: 180 V DC Rated current: 2.80 A Motor speed: 1400 rpm Output speed: approx. 23 rpm Gear ratio: i = 60.1 Brake torque: 20 Nm Cos φ: 0.75 Ingress protection: IP54 Insulation class: F Weight: 21.2 kg

Condition: new, Year of construction: 2026, The ZX 7045E milling/drilling machine is a versatile tool for machining steel . It is ideal for drilling, reaming, boring, threading , milling and face milling. The machine allows precise drilling of holes in cast iron up to 45/40 mm in diameter. In addition, bolts up to M12 mm can be threaded, up to 80 mm wide can be milled and rebates up to 22 mm deep can be made. The ZX 7045E milling/drilling machine is a reliable tool ready to go! Machine characteristics Heavy Stable Cast Iron: The robust construction based on heavy cast iron ensures stability and durability of the machine even during intensive use. Milling machine height adjustable on the slide: The unique height adjustment on the slide, rather than on the column, allows the machine to be adapted to different applications. Massive Cross Table for Milling/Drilling Machine: An impressively sized table with a precision-ground surface provides a solid base for a variety of projects. Swallow Tail Shaped Guides: Innovative dovetail-shaped slides guarantee smooth movements in three axes for excellent machining results. Quiet Operation Thanks to Ground Gear Wheels: The ground gears make the machine run quietly, which contributes to comfort in the workshop. Left and Right Rotation: Rotate the tool in both directions, adapting to different tasks. Pivoting head +/- 90 degrees and Adjustable head height: Flexibility in angle setting and height adjustment allow full control over material processing. Additional Options, Additional Benefits: The ZX 7045E version is available from stock and you will also receive a kit free of charge: Drill chuck Reduction bush MK4/MK3 Reduction bush MK3/MK2 The ZX 7045E milling/drilling machine is not just a tool, it is a partner that can meet even the most demanding challenges in your workshop. Order now and experience perfect precision and performance! (Base available as an option) Technical data Maximum drilling diameter 45 mm Maximum face milling diameter 80 mm Maximum cylindrical milling cutter diameter 28 mm Maximum thread diameter 12 mm Spindle pin protrusion 100 mm Spindle taper MT4 Spindle speed (6 speeds for 1400r/min motor) Nodjud Iztepfx Aiyeda 1400r/min ) 95, 170, 280, 540, 960, 1600min-1 Maximum distance from spindle nose to table 460 mm Travel in X / Y / Z axis 500 / 210 / 425 mm Distance from spindle to column surface 245 mm Work table dimensions 730x210 mm Base dimensions 400x600 mm Motor s1/s6 1500W/2100 W 400V Machine dimensions (height with base) 1080 x 770 x 1460 mm Weight 278 kg Available accessories MK3/B18 drill chuck shank handy tools drill chuck 3-16 mm/B18 reduction sleeve MK4/MK3 reduction sleeve MK3/MK2

Condition: excellent (used), Cup band forming machine with press-in device Pneumatic clamps Nsdpjt Tbutjfx Aiyjda Foot pedal, stop rail and stand Some drills included

Condition: new, Year of construction: 2026, Machine characteristics Automatic table feed in X, Y axis: gain precision and efficiency thanks to the automatic table feed in two planes. Achieve perfect results without extra effort. Mechanical Z-axis table feed: We offer an innovative Z-axis table feed for fast and precise material processing. Reduce working time without sacrificing quality. Heavy Stable Cast Iron: The robust construction of the machine ensures stability and durability. The heavy cast iron ensures precise workmanship, which translates into accurate machining. Solid Cross Table with Precision Ground Surface: A cross table made with attention to detail, with particular emphasis on precision surface grinding. This guarantees perfectly smooth material processing. Swallow Tail Slides on All 3 Axes: Thanks to the innovative dovetail guides, the machine achieves maximum precision movement in all three axes. Achieve accurate results without compromise. Quiet Operation Thanks to Ground Gear Wheels: Work without unnecessary noise. Thanks to the ground gears, the machine runs smoothly and quietly for comfortable working. Left and Right Rotation: Adapt the work to your needs. The machine has a left and right rotation function, allowing even greater flexibility in material processing. Swivel head +/- 90°: Turn the head in any direction. The +/- 90° swivel function allows a diverse use of the machine, adapting it to different projects. CORMAK ZX 7550 CW - it's not just a milling machine, it's a tool that meets even the most demanding challenges. Order today and experience excellence in material processing! Max. drilling diameter 50 mm Max. horizontal milling length 100 mm Max. vertical milling diameter 25 mm Max. threading diameter M16 Nodpfsud Icqox Aiysda Max. boring diameter 120 mm Spindle taper ISO 40 Vertical spindle speed range and number 50Hz 115-1750 (rpm) (8) Horizontal 50Hz spindle speed range and number 60-1350 (rpm) (9) Distance between spindle and column surface 200-700 mm Distance between spindle and table 100-480 mm Distance between spindle axis and table 0-380 mm Spindle extension 120mm Table size 1000x240 mm Table travel 600x230 mm Feed of table 24-720 mm/min (8 speeds) Spindle feed rate 0.015; 0.08; 0.25 mm/rev. Number, width and spacing of T-slots 5/14 mm/44 mm Motor (vertical/horizontal) 0.85-1.5/1.5 kW Overall dimensions 1120x1060x2035 mm Weight 970 kg Version-dependent equipment digital readout for 3 axes SINO reduction bushings ISO 40/ Morsea Drill chuck 1 - 16 mm EC declaration of conformity machine vice L - 160 mm milling spindle with a set of collets for finger joint cutters horizontal spindle support / eyepiece long moulder spindle basic tools 24 V halogen lighting system cooling system operating manual in Polish

Condition: new, Year of construction: 2026, This machine can be used for drilling, reaming and boring holes up to 45/40 mm in cast iron, threading up to M12 mm bolts, up to 80 mm milling and up to 22 mm notching. It is also useful for cutting and frontal milling. ZX 7045 B1 is by default equipped with an autofed spindle and a cooling system. Base available optionally. Rigid, sturdy cast iron Autofed spindle Milling machine height adjusted on the support, not on the column Additional flood coolant system Rigid cross table with precisely ground surface Dovetail-shaped guides Quiet work due to the ground gears Left/right rotation +/- 90° rotary head Adjustable head height Base available optionally Technical data Steel drilling efficiency 32 mm Cast iron drilling efficiency 45 mm Frontal mill diameter 80 mm Arbor mill diameter 28 mm Nedpfx Aievxth Hsyjda Spindle speed 50–3024 rpm (6/12) Arbor chuck MK4 Spindle feed 110 mm (automatic feed) Worktable dimensions 820 mm×240 mm Maximum distance from spindle to table 475 mm X-axis longitudinal travel 550 mm Y-axis transverse travel 170 mm Left/right rotary head 90° Motor power 1.3/1.8 kW Power supply 400V Weight 360 kg

Condition: new, Bore diameter variabel mm Number of heads horizontal 3 St. Number of heads vertical 4 St. Dimensions (L/W/H) 6100x1500x2300 mm Weight 950 kg 1 NEW drilling and milling center Götzinger Power Drill 300 With the Götzinger PowerDrill you can, depending on the type and design: - Drill on the front and on the long side - Dowels of front doors, pegs, fighters - The drilling patterns are freely programmable - You can drill: handle slides and corner bearings, with quick-change multiple spindle - You can: Milling lock case, pusher and PZ as well as 3D belts and drill - The machine has a horizontal and a vertical milling unit - A simple control lets you create drilling and milling programs, save and call again Base frame in sturdy design, covered with sheet metal Table top 1800 x 200 mm Processing unit: X-axis - 500 mm working travel Y-axis - 0-120 mm Z-axis - 0-105 mm (above table) Horizontal aggregates: 1 horizontal drilling unit (dowel drilling unit left) ----- Drilling motor 220 V, 1.1 kW Collet holder ER 25 4,000 - 11,000 rpm adjustable 1 milling unit horizontal for lock case ----- Milling motor 2.2 kW Speed ??controllable 3,000 - 16,000 rpm Collet holder ER 25 1 horizontal drilling unit (dowel drilling unit right) Ndjdpfx Aijif Az Uoyja ----- Drilling motor 1100 W, infinitely variable 4,000 - 11,000 rpm, with collet holder ER 25 Vertical aggregates: 1 drilling unit vertical ----- Drilling motor 1100 W, infinitely variable 4,000 - 11,000 rpm, with collet holder ER 25 1 boring unit vertical - with quick-change boring head ----- Drilling motor 1,1 KW, 3,000 rpm Included: 1 boring head BKF 2/3, for corner bearing incl. Drill set, quick-change ----- On loose item, drill assembly to customer fitting 1 boring head BKF 3, for olive incl. Drill set, quick-change ----- On loose item, drill 1 cubo d = 25, 2 x dowel d = 10 1 milling unit vertical for lock case ----- Milling motor 2.2 kW Speed ??controllable 3,000 - 16,000 rpm Collet holder ER 25 1 piece length stop right and left, usable length 2.7 m, NC controlled Control: electro-pneumatic with three-axis NC positioning controller and integrated machine function Input via TFT display, 10 "color Machine complete, CE-compliant, with 1 set of drilling tools, DÜBO each 1 x d = 6,8,10,12 + 2 roughing cutters d = 16, ready for connection Loading dimensions: Machine L x W x H = 2.50 x 1.50 x 2.30 m, weight 850 kg Length stop L x W x H = 6.00 x 0.30 x 0.30 m, weight 100 kg ----- Total price in above mentioned version, ex works: on request Plus freight and installation / instruction (Technical information according to the manufacturer - without guarantee!)

Condition: ready for operation (used), Year of construction: 1981, Stankoimport gear hobbing machine 5K328A Year of manufacture: 1981 Max. diameter of the gear wheel: - with counterbeam: 800 mm - without counterbeam: 1250 mm Max. module: 12 mm Max. width of the gear wheel: 560 mm Min. number of teeth: 20 Helix angle: +/- 60 degrees Table diameter: 935 mm Max. weight on the table: 2000 kg Hob arbor taper: Morse 6 Hob arbor speed range: 32 - 200 RPM Ndedpfjzq Sq Hsx Aiysa Working feeds: - vertical: 0.5 - 5.6 mm/rev - radial: 0.22 - 2.6 mm/rev - tangential: 0.07 - 2.58 mm/rev Main electric motor power: 10 kW Net weight of the machine: 14 tons Change gears, arbors, and support available! Video of the machine in operation available!

Year of construction: 1980, condition: reconditioned (used), Universal swiveling and tilting table for MAHO MH 1000 Clamping area: 1050 mm x 630 mm The universal swiveling and tilting table is in good condition! Ndjdpsfx Aipofx Aiyoa

Condition: good (used), overall weight: 500 kg, total length: 1,000 mm, total width: 800 mm, total height: 500 mm, Box table ASQUITH MACH-ID 9774 Make: ASQUITH Number of T slots: 5+3 Jump from T to T: 160mm T size: 27mm Number of T-slotted sides:8 Length: 1000mm Width: 800mm Ndodpfozrflgox Aiyea Height: 500mm Weight: 500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2026, functionality: fully functional, Sharpening device for drill bits made of HSS or any other hard metals, ensuring precise grinding and easy handling. Adjustable tip angle in the 90°–135° range. This model is equipped with an additional slot for sharpening undercuts. Machine features Nedpfx Aiezp Ea Eoyeda Precise grinding and convenient handling. Sharpening drill bits with ease. Portability due to its modest dimensions. Dressing wheel promising superb efficiency. Fully equipped; with a handle inside the device. Additional slot for sharpening undercuts. Technical data Drill bits diameters capability ø2–13 mm Angle of the tip 90°–135° POWER 120 W / 230V Motor speed 4800 rpm Approx. weight 9 kg Dimensions 330 x 170 x 160 mm PLEASE NOTE!!! This machine is a returned item; it is second-hand but in working order. NO WARRANTY AND NO RETURNS!!

Condition: new, Year of construction: 2026, CORMAK WS20B Bench Drill Press – Precision Metal Drilling Machine with Automatic Spindle Feed The CORMAK WS20B bench drill press is an advanced column drilling machine for metalworking, equipped with automatic spindle feed, enabling precise drilling and tapping in structural steel and other metals. Thanks to its robust construction, high power and accurate feed control, the WS20B provides high efficiency and reliability in both industrial and workshop applications. Main advantages of the machine Automatic spindle feed – precise feed adjustment up to 80 mm/min allows smooth and controlled drilling operations. Thread tapping function with automatic rotation direction switching – ensures safe and effective operation with taps up to M16. High rigidity construction – an 85 mm diameter column and seasoned castings reduce vibrations and improve drilling accuracy. 135 mm spindle stroke – allows deep drilling without the need to reposition the workpiece. Belt drive system – 5 speed levels ranging from 280–1875 rpm allow optimal adjustment of parameters to the processed material. CE safety systems – spindle and belt transmission guards with limit switches increase operator safety. Construction and technology The CORMAK WS20B bench drill press with automatic feed has been designed for long-term and reliable operation. The spindle and transmission components are made of hardened and thermally treated steel. The column, base and worktable are manufactured from precisely machined, seasoned cast iron components. The MK2 Morse taper enables quick tool replacement and compatibility with a wide range of accessories. Precision and work efficiency The combination of automatic spindle feed and a powerful 1.1 kW motor enables smooth and repeatable drilling, even in difficult-to-machine materials. The rigid construction and the ability to rotate the worktable 360° improve operator comfort and provide greater flexibility when positioning workpieces. Applications The CORMAK WS20B drill press with automatic feed is used in: industrial plants, Ndedpfx Aierif T Djyja mechanical workshops, maintenance departments, technical schools and training centres. It is designed for drilling, reaming and tapping operations in metals, aluminium and engineering plastics. Standard equipment Drill chuck with key Morse taper drift key U-type spindle guard with safety limit switch Belt drive guard with safety limit switch Technical specifications Parameter Value Maximum drilling diameter (steel) 20 mm Maximum tapping diameter (steel) M16 Spindle stroke 135 mm Spindle taper MK2 Spindle speed range 280–1875 rpm Number of speeds 5 Feed speed range 0–80 mm/min Column diameter 85 mm Column wall thickness 12.7 mm Spindle-to-column distance 260 mm Spindle-to-table distance 366 mm Spindle-to-base distance 678 mm Table dimensions 300 × 320 mm Base dimensions 376 × 566 mm Motor power 1.1 kW Power supply 400 V Net weight 179 kg Machine dimensions 800 × 450 × 1250 mm

Condition: excellent (used), Plate size: 1500 x 1500 mm Plate height: 100 mm Table height above floor: 950 mm Ndodpjzn I T Sofx Aiyja Material thickness, approx.: 11.5 - 13 mm Bore diameter: 16 mm Weight, approx.: 397 kg

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, spindle diameter: 128 mm, spindle speed (max.): 3,500 rpm, table length: 850 mm, table width: 850 mm, feed length X-axis: 1,600 mm, feed length Y-axis: 920 mm, feed length Z-axis: 950 mm, workpiece weight (max.): 5,000 kg, year of last overhaul: 2024, WFQ80CNC, Overhaul 2008 | 3.0585A ■ T-TYPE HORIZONTAL BORING MILL ■ PRODUCER: TOS VARNSDORF ■ OVERHAUL YEAR: 2008 (RETOS) ■ CONDITION: USED, EXCELLENT ■ WARRANTY: YES ■ IN STOCK SPECIFICATION ■ Heidenhain TNC426 control system with handwheel HR410 ■ SIEMENS motors and drives ■ operator housing against swarf and water ■ magnetic swarf conveying system SCOPE OF REPAIR 2024 ■ cleaning, revision and technical inspection ■ replacement of Heidenhain TNC426 control system Nsdpfx Asztqq Dsiyoda ■ refurbish of electrical cabinet ■ exchange of damaged cables ■ repair of control panel ■ complete machine geometry repair (geometric accuracy protocol on request) ■ revision of drives (new ball screw bearings X+Z) ■ revision of headstock ■ revision of hydraulic power pac ■ revision of lubrication and clamping ■ new telescopic covers

Condition: used, Year of construction: 1988, taper MK 1 weight of the machine ca. 140 KG Ndodpoztfwfjfx Aiysa

Condition: good (used), HANG 114-00/4 paper drill The device is in very good condition. This is the latest product of the hang brand. The highest class of machines among drilling machines.. Waste directed to an external container. Controlled by an electric foot switch. Each head is independently adjustable, which allows the use of drills of different lengths. Technical data: number of drilling heads: 4 drill diameter: 3-10mm stack height: 65mm drill spacing max260mm Ndodpfoztn Duex Aiyoa drill speed: 1500 rpm two table lifting speeds table dimensions: 600x480mm Power supply: 400V Weight: 400kg The machine has documentation, operating tools and drills.

Condition: used, Technical data: - Shank: 8 mm - Diameter: Mainly 5.8 & 4.5 mm - Quantity: 30 pieces Ndsdpfx Aiszrya Ejyea - Material: HSS - Condition: As new

Condition: used, Shank cutters and drill bits in mint condition, unused, sharpened and second-hand, for CNC machines, as shown in the examples. Technical data: - Length: Various - Diameter: Various - Shank: Various - Weight: 12 kg Nsdpfjzrybpjx Aiyoda - Application: Woodworking

Condition: used, Grooved bed guide as good as new approx. 305 x 240 x 30 mm Njdpfx Aiozrxp Ssyjda Various other table tops (new and second-hand) available on request

Condition: used, A Bäuerle SFM-type rigid table router or rigid router for profiling and routing timber. Technical data: - Spindle diameter: 30 - Direction of rotation: Left and right - Motor: 3 kW Ndodpfx Aozryrboiyoa