Used Angular Gear 1:16 for sale (83,253)

Year of construction: 2023, condition: ready for operation (used), A Herzog two-head square braiding machine is available. Number of carriers 1/2: 12/16, tandem carrier configuration: 8, horn gear diameter: 150mm/200mm, speed 1/2: 175rpm/131rpm, bobbin diameter: 55mm, bobbin height: 130mm, bobbin capacity: 265cm³. Including 2x change gears, 2x double gears, 28x bobbins, 28x thread tension springs, 2x take-off discs, 6x wooden drums, 8x carrier tubes, 2x braiding plates and one carrier guard. The machine has only been operated for a few thousand running meters and is therefore in very good, near-new condition. Documentation available. An on-site inspection is possible. Laodpfjzqfx Dsx Apdsg

Condition: used, heavy gear, angular gear -Translation: 1:16 -Drive shaft hollow shaft: 38 mm -Output shaft shaft: 48 mm -with claw coupling: -Number: 1 piece gear available Laedpjdkf Iqefx Apdjg -Price: per piece -Dimensions: 470/240/H445 mm -Weight: 59 kg/piece

Condition: good (used), Year of construction: 1982, number of straightening rollers: 13, straightening roller diameter: 145 mm, Year of construction / YOM: 1982/2024 Sheet width: 2000 mm Sheet thickness - max.: 10 mm Sheet thickness - min.: 3 mm Lasdez D A Hijpfx Apdsg Number of straightening rollers: 13 rollers Straightening roller diameter: 145 mm Straightening speed: 16 m/min Bundle length: 2330 mm Center distance between straightening rollers: 150 mm Support roller diameter: 290 mm Main drive motor: 30 kW Weight: 32 t Additional information: - Number of support rollers: 21/24 - Number of supports (top/bottom): 3 /3 - Traverse lift speed: 0.71 mm/sec - Traverse lift stroke: -18 mm to +42 mm - Max. tilting of lower traverse: 8 mm

Condition: used, functionality: fully functional, spindle mount: MK 5, drilling depth: 315 mm, height adjustment type: hydraulic, rotational speed (max.): 2,000 rpm, rotational speed (min.): 25 rpm, total width: 1,070 mm, total length: 2,500 mm, total height: 2,840 mm, table width: 500 mm, table length: 630 mm, overall weight: 3,500 kg, arm reach: 1,600 mm, For sale: ZJ Z3050×16/1 radial drilling machine. Robust radial drilling machine for drilling, reaming, countersinking, and tapping larger and heavier workpieces. Thanks to the long radial arm, the drill head can be positioned flexibly above the workpiece without the component needing to be constantly moved or re-clamped. This machine is equipped with hydraulic clamping for the arm, column, and drill head. The combination of the heavy-duty construction, the wide working range, and the mechanical 16-speed and feed control makes it suitable for maintenance work, structural work, machine construction, and general metalworking. The machine is being sold due to a restructuring of the production facility. It is offered in used condition, as shown in the photos. Inspection and, if desired, a functional test are possible by appointment in Kuurne, Belgium. The vice, clamping devices, and other accessories visible in the photos are only included if this is expressly agreed upon. Ledpfxjzhbtrj Apdsag

Condition: used, Year of construction: 1980, number of straightening rollers: 16, working width: 1,250 mm, sheet thickness (max.): 12 mm, overall weight: 24,825 kg, Manufactured by BLEMA GOTHA (Germany) Max sheet thickness, mm 12,5 Max sheet width, mm 1250 Number of straightening rollers: 16 Straightening speed, m/min 16 Laedpfx Aozap Rwjpdsg Motor capacity, kW 54 Machine weight, kg 24825 Sheet leveling machine BLEMA GOTHA UBR 12,5 x 1250 / 1-16 The WMW UBR 12.5 x 1250/1-16 is an industrial multi-roller sheet straightening machine. Machine is complete and could be prepared for immediate shipment.

Condition: used, Year of construction: 1986, grinding length 5000 mm grinding width 2500 mm workpiece height 1600 mm column daylight 2680 mm Passage height 1720 mm table surface area 5500x2240 mm T-slot - distance 250 mm T-slot - width 36H12 mm T-slots 9 workpiece weight 50.000 kg table speed -stepless- 1-40 m/min grinding motor 22 kW turning speeds 960 U/min total power requirement 146 kW weight of the machine ca. 140 t dimensions of the machine ca. 17,5x10,5x6,6 m Peripheral grinding support: 960 rpm, 22 kW Universal grinding support: 7 kW, 500-2900 rpm Crooked grinding device Ljdpoyqu A Hjfx Apdjag The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, laser power: 3,200 W, sheet thickness (max.): 8 mm, working length: 3,000 mm, working width: 1,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Combined punching/laser operation: 3,000 mm × 1,500 mm Punching operation: 3,000 mm × 1,500 mm Laser operation: 3,000 mm × 1,500 mm Working area without repositioning: Large format Sheet metal thickness, structural steel max.: 8 mm Sheet metal thickness, stainless steel max.: 8 mm Sheet metal thickness, aluminum max.: 4 mm Maximum punching force: 220 kN Maximum punching speed (at 1 mm stroke): 900 strokes/min Maximum marking speed: approx. 2,800 strokes/min Lasdpfx Aszyay Iepdeg Maximum axis speed: 108 m/min Axis speed: simultaneous in X and Y axes Tool magazine: Linear magazine with multi-tools Maximum number of multi-tools: 18 Clamps: 3 Tool positions: 180 MACHINE DETAILS Laser source: Trumpf TruFlow 3200 CO₂ laser Laser power: 3,200 W Operating hours (as shown in the photo) Beam on hours: 12,716 h Laser on hours: 73,705 h EQUIPMENT SheetMaster with two large-format tables Automatic scrap sheet disposal onto lifting table

Condition: used, Year of construction: 1975, max. wheel diameter 160 - 1.600 mm gear width 250 mm Lsdpfx Apot Hwptjdjag max. module 20 min. module 1,5 total power requirement 1 kW weight of the machine ca. 3 t dimensions of the machine ca. m

Condition: good (used), Year of construction: 1992, machine/vehicle number: 530640, Offer 26203 Technical data: - Drilling capacity - in steel: 16 mm - Drilling capacity - in aluminum: 20 mm - Drill spindle connection: MK 2 - Drilling depth: 100 mm - Spindle/column overhang: 215 mm Lasdpfxjz Dgbdo Apdsg - 6 drill spindle speeds, stage 1: 200 - 1600 rpm - 6 drill spindle speeds, stage 2: 400 - 3200 rpm - Drive: 400 V / 0.7 kW - Drilling table with T-slot: B 250 x D 320 mm - Max. distance drill chuck / table: approx. 220 mm - Space required: approx. W 300 x H 1050 x D 450 mm - Weight: approx. 100 kg - Quick-change drill chuck: 1 - 13 mm - Coolant system - Original machine base cabinet

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, REF: MM5770 1 x Cime Careddu automatic inline rinsing and filling machine for 1L bottles. Suitable for filling glass and PET bottles. Laedjulpmzjpfx Apdjg Manufacturer - Cime Careddu Srl Model - SILVER 16/16 (16 x heads). Date of manufacture - 2012. Can handle and fill bottles up to 2 litres in capacity but this unit is supplied with change parts for 1 litre bottles. Overall dimensions - 2.8m L x 1.7m W x 2.25m H. In operation until January 2025, can be viewed working until this point. This unit is a very reliable system and has been very well maintained, used for 30-40 hours (approx) per week. 

Condition: good (used), Year of construction: 1990, power: 1.4 kW (1.90 HP), pressing force: 16 t, stroke length: 200 mm, table width: 300 mm, table length: 4,700 mm, table height: 850 mm, throat depth: 300 mm, total length: 4,700 mm, total width: 1,600 mm, total height: 2,200 mm, overall weight: 2,800 kg, Straightening press for bars and tubes, pressing force 16 tons, press element L = 1500 mm + 2 attachment elements, each 1600 mm long, each with 1 tailstock, with numerous support blocks and plungers. Laodpfxjzwgype Apdog

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 630 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D, total height: 3,200 mm, total width: 3,400 mm, overall weight: 9,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 38,000 W, number of slots in tool magazine: 40, product length (max.): 6,250 mm, number of axes: 4, This 4-axis HELLER MCI 16 was manufactured in 2004. It features a robust X, Y, and Z-axis travel of 630 mm, with a maximum spindle speed of 10,000 rpm and a spindle power of 38 kW. The machine includes a tool magazine capacity of 40 pockets and a rotary table with a maximum clamping weight of 500 daN. If you are looking to get high-quality machining capabilities, consider the HELLER MCI 16 horizontal machining centre we have for sale. Contact us for further details. - Voltage: 400 V- Frequency: 50 Hz- Nominal Current: 99 A- Total Connected Load: approx. 69 kVA- Feed Rates (X, Y, Z): 1 - 60,000 mm/min- Rapid Traverse (X, Y, Z): 60,000 mm/min- Acceleration (X, Y, Z): 10.0 m/s²- Rotary Table Indexing Precision: 360 x 1°, precision 6"- Maximum clamping force of the rotary table: 500 daN- Rotary Table Max Tangential Torque: 10,000 Nm- Rotary Table Max Tilting Moment: 8,000 Nm- B-Axis Speed: 40 rpm- Pallet Changer Size: 400 x 500 mm, 61 x M12 mounting thread- Tool Chain Magazine Capacity: 40 tool pockets- Max Tool Diameter: 72 mm (all pockets occupied) / 150 mm (with free adjacent pockets)- Max Tool Length: 320 mm- Max Tool Weight: 12 daN- Spindle Max Power (S6-40%): 38 kW (from 1500 rpm)- Spindle Max Torque (S6-40%): 240 Nm (up to 1500 rpm)- Measuring System: Direct with linear scales- Positioning Tolerance: 0.007 mm- Coolant Capacity: approx. 1,500 L- Optional Equipment / Features: Central cooling unit for spindle and cabinet, run-out inspection device RLE1, mechanical drill breakage control, coolant lubricant system with chip conveyor, Renishaw probe, manual rotatable workpiece setup station (4x90°)- Included Components: Without clamping device, including 2x machine pallets Technical Specification Taper Size SK 40 Lsdoz Dhgbjpfx Apdjag

Condition: good (used), amount 1 STK Ledpszuum Eofx Apdjag Dimensions (HxWxD) 280 x 190 x 190 mm diameter 60 mm -> Bestcut gear hobbing cutter with HSS cutting material - Chip angle < 8° -> Module 16 F.20° 1gg Lks -> BP IV D-Stg < 5°40' -> 5° 40' Sp Stg 00

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 630 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D, total height: 3,200 mm, total width: 3,400 mm, overall weight: 9,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 38,000 W, number of slots in tool magazine: 40, product length (max.): 6,250 mm, number of axes: 4, This 4-axis HELLER MCI 16 vertical machining centre was manufactured in 2005. It features a robust X, Y, and Z-axis travel of 630 mm, with a maximum spindle speed of 10,000 rpm and a tool magazine capacity of 40 pockets. The machine has a total connected load of approximately 69 kVA and weighs 9,000 kg. If you are looking to get high-quality machining capabilities, consider the HELLER MCI 16 vertical machining centre we have for sale. Contact us for further details. - Voltage: 400 V- Frequency: 50 Hz- Nominal Current: 99 A- Total Connected Load: approx. 69 kVA- Feed Rates (X, Y, Z): 1 - 60,000 mm/min- Rapid Traverse (X, Y, Z): 60,000 mm/min- Acceleration (X, Y, Z): 10.0 m/s²- Rotary Table Indexing Precision: 360 x 1°, precision 6"- Maximum clamping force of the rotary table: 500 daN- Rotary Table Max Tangential Torque: 10,000 Nm- Rotary Table Max Tilting Moment: 8,000 Nm- B-Axis Speed: 40 rpm- Pallet Changer Size: 400 x 500 mm, 61 x M12 mounting thread- Tool Chain Magazine Capacity: 40 tool pockets- Max Tool Diameter: 72 mm (all pockets occupied) / 150 mm (with free adjacent pockets)- Max Tool Length: 320 mm- Max Tool Weight: 12 daN- Spindle Max Power (S6-40%): 38 kW (from 1500 rpm)- Spindle Max Torque (S6-40%): 240 Nm (up to 1500 rpm)- Max Spindle Speed: 10,000 rpm- Measuring System: Direct with linear scales- Positioning Tolerance: 0.007 mm- Coolant Capacity: approx. 1,500 L- Optional Equipment / Features: Central cooling unit for spindle and cabinet, hydraulic workpiece clamping, run-out inspection device RLE1, mechanical drill breakage control, coolant lubricant system with chip conveyor, Renishaw probe, manual rotatable workpiece setup station (4x90°)- Included Components: 2x hydraulic clamping devices, 2x machine pallets Technical Specification Taper Size SK 40 Ljdpfx Apez Dhdasdeag

Condition: excellent (used), Year of construction: 2014, operating hours: 5,650 h, functionality: fully functional, machine/vehicle number: 243-0011, CNC AUTOMATIC LATHE TORNOS EVODECO 16/10 with bar-feeder LNS Fanuc 31iB - 5646 hours Ledpfekhnqgox Apdjag Manufacturing origin CH Voltage 400 V Netweight 2700 kg Dimensions 2135x1250x2114 mm TECHNICAL DATA Number of axes 10 Number of spindles 2 Main spindle Maximum bar diameter 16 mm Maximum machining length 180 mm Spindle speed 12'000 min-1 Spindle power 15.8 kW Indexing accuracy C-axis 0.001 Counter spindle Maximum bar diameter 16 mm Spindle speeds 12'000 min-1 Spindle power 15.8 kW Indexing accuracy C-axis 0.001 Tool gang 1 Number of positions 5 Number of motorized positions 3 Rotating tool speed 8'000 min-1 Tool gang 2 Number of positions 5 Number of motorised positions 3 Speed of rotating tools 8'000 min-1 End attachment Number of positions 4 Number of motorised positions 3 Speed of rotating tools 8'000 min-1 back operation Number of positions 6 Number of motorised positions 6 Rotating tool speed 8'000 min-1 Power supply Supply voltage 400V Errors and omissions excepted-data given without obligation

Condition: ready for operation (used), Year of construction: 2015, operating hours: 29,446 h, clamping force: 2,600 kN, screw diameter: 60 mm, overall weight: 22,300 kg, controller manufacturer: ENGEL, controller model: CC300, product length (max.): 8,780 mm, Electrical injection moulding machine manufactured in 2015. This Engel e-victory 1640/260 features a clamping force of 2600 kN and an injection unit of 1640. It includes a tiebarless clamping system and a servo-electric injection system for high efficiency. If you are looking to get high-quality injection moulding capabilities, consider the Engel e-victory 1640/260 machine we have for sale. Contact us for further details. • Clamping system: Tiebarless ENGEL clamping system • Injection unit: 1640 • Injection system: Servo-electric, high execution • L/D ratio: 24 • Control unit: ENGEL CC300 (21.5" Full HD touchscreen) • Hydraulics: ECODRIVE SHV1 (1 demand-regulated servo pump) • Electrical connection: 3 x 400 V + N + PE, 50 Hz • Nominal connected load: approx. 164 kW • Centering: 160 mm • Hydraulic core pulls: 2 on moving platen, 2 on stationary platen • Vacuum/compressed air circuits: 8 on stationary platen with Venturi nozzles and pressure switches • Pneumatic mold valve control: 2-fold FESTO, up to 16 bar • Mold heating: 16 control zones, max heating power 25 kW • Nozzle radius: 15 mm • Nozzle bore: 4 mm • Nozzle contact stroke: approx. 405 mm • Hydraulic tank capacity: Main tank approx. 490 l, suction tank approx. 220 l • Robot interface: Euromap 67 / AN-146 • Languages: Czech and German Additional equipment • MuCell package: • Complete MuCell Basic Package • PM cold-work steel screw Ø 60 mm • Hydraulic needle shut-off nozzle • Melt pressure sensor Laodpjz Dgrpefx Apdog • Trexel auxiliary equipment: SII VC 30, MIK 1060 SII • Frame for two 50 L gas cylinders • Mold temperature control: 3 ENGEL flomo distributors (24 monitored circuits total) • GEKU automation with conveyor belts

Condition: used, heavy gear, angular gear -Type: E 880 G -Shaft: Ø 20 mm -Length: 50 mm -Flange: Ø 125 mm -Dimensions: 260/280/H160 mm -Weight: 16 kg Laodpfsd N N Dqex Apdog

Condition: ready for operation (used), * Brand: SKAKO * Surface: 5000 x 1600 mm – 1 deck * Screen opening: [] 160 mm. * Driving: E-motor 22 kW. Ledpjywmh Nofx Apdeag

Year of construction: 1990, condition: defective spare-parts repository (used), -1- used rotor body for SBM 16 22 6 or Hazemag AP5 wide. Including 6 blow bars type HAZ 846 b (380x85x2250 mm, approx. 548 kg each), needs repair (see photos), year of manufacture unknown. Weight approx. 10 t, dimensions approx. 2250 x 1600 x 1600 mm. Ledjy Au Nropfx Apdsag

Condition: like new (used), Year of construction: 2017, A complete welding system based on the KUKA KR 16 L8 arc industrial robot with KRC4 controller and Fronius CMT welding system. The system includes a KUKA KP1 positioner and a wire feeder with cooling. All main components are from 2017. The kit includes a cleaning device and a laser device for automatic torch geometry correction (Rotolab), as well as a Siemens safety PLC. Technical data: Industrial robot: Lasdpjy Hktnofx Apdsg Model: KUKA KR 16 L8 arc HW, Serial No.: 867099, Year of manufacture: 06/2017, Number of axes: 6, Payload: 8 kg, Reach: 2015 mm, Weight: 240 kg Positioner/Rotator: Model: KUKA KP1-HC1000R980, Maximum payload up to 1 t, Serial No.: 152228, Year of manufacture: 06/2017, Weight: 850 kg FRONIUS welding machine: Type: TransPuls Synergic 400 CMT R, Serial No.: 28245623, Output: 400 A, with cooling unit Model: Fronius FK 4000-R FC, Serial No.: 28245627, Power supply: 400 V, Frequency: 50–60 Hz, Current: 0.6 A, Maximum pressure: 4 bar (0.4 MPa), Power: 2 kW, Protection class: IP23 Wire feeder: Model: Fronius VR 7000-CMT 4R/G/W/F++, Serial number: 28245629, Voltage U11: 55 V / 4 A, Voltage U12: 24 V / 2 A, Wire feed speed: 0.5 – 22 m/min, Welding current: – 400 A (100%), Protection class: IP23

Condition: used, Year of construction: 1971, sheet width 2000 mm plate thickness 16 bei St 42 mm passage width 2250 mm impact length 1000 mm blade length 2005 mm throat 600 mm cutting gap adjustment 0,05 - 0,95 mm cutting angle 1° 40' ° down holder 10 Stück back stop - adjustable 10 - 1000 mm table: 2500 x 700 table height over floor 800 mm quantity of oil 900 l weight of the machine ca. 10 t dimensions of the machine ca. 3 x 2,3 x 2,3 m voltage 380 V Lodpfeww Nccox Apdoag Food switch, material support beams, spare knifes.

Condition: good (used), Gear, angular gear, Stinrad gear, transmission gear, worm gear, angular gear for edge banding -Manufacturer: ZAE, angular gear with cardan joint from the BRANDT KS 25 edge banding machine -Type: W 88 -Translation: i = 2: 1 -Dimensions: 260/100 / H210 mm Lsdpfxegylraj Apdjag -Weight: 7.2 kg

Condition: good (used), Die holder, notching tool, punching tool, punch, punch die, punch stamp, punch die Ledpjzr Ek Njfx Apdoag -Die: Punch and die Ø 46 mm / 1 13/16" -Transport dimensions: Ø 90 x 80 mm -Weight: 2.2 kg

Condition: used, Year of construction: 1995, Used Filling Monoblock FIMER 16-1 up to 3500 BPH Introduction to the Filling Monoblock FIMER 16-1 The Used Filling Monoblock FIMER 16-1 excels in the bottling industry with its impressive production capacity of up to 3500 bottles per hour (BPH). Originally designed in 1995, this machinery combines robust construction with advanced technology, thereby establishing itself as a top choice for companies that prioritize efficiency without compromise. Technical Specifications Equipped with 16 valves, this monoblock operates using a gravity or light depression filling system. Ideally, it minimizes foam formation and ensures even filling. This type of monoblock works perfectly for fillining spitrits and still wines. Moreover, the system adapts seamlessly to bottle sizes of 0.70 L and 1.0 L, significantly enhancing production line versatility. Components and Operation Furthermore, the capping system of the Filling Monoblock FIMER 16-1 employs a fixed nozzle, specifically designed for T-stoppers. The capping head effectively manages 21 mm diameter caps, securing a reliable and high-quality seal crucial for preserving the bottled contents. Configuration and Maintenance Currently, the Monoblock, still in production, demonstrates significant reliability and maintenance ease. Its design incorporates a clockwise rotation, an important consideration for integrating the machinery into existing lines to optimize workflow. Efficiency and Sustainability Additionally, this Filling Monoblock not only achieves high efficiency in production capacity but also adheres to sustainability standards by minimizing material waste. Consequently, this feature becomes increasingly vital for companies committed to reducing their environmental impact. Ledpfx Ajvgvlwopdsag Final Considerations of the Filling Monoblock FIMER 16-1 Employing the Filling Monoblock FIMER 16-1 reflects a commitment to maintaining high-quality and efficiency standards in the bottling industry. Its proven reliability, combined with modern maintenance practices, ensures that this machine remains essential for any bottling operation striving for excellence. Ultimately, investing in a system like this Filling Monoblock  is a wise decision for the future of production.

Condition: used, Gears, angular gears, stin gear, angular gear, transmission gear -Translation: i = 1: 1 -Drive shafts: dimensions see pictures Lasdpfx Asft Aicjpdsg -Dimension: Ø 225 x 180 mm -Weight: 9.6 kg