Eccentric presses

WMW MORGENRÖTHE PEEV 25/1 PEDV 16/II -S

Condition: new, Year of construction: 2025, Protec Welding Turntable, 5000 kg load capacity Variable speed control, 0.05 - 0.5 RPM Handheld remote control Height: 600 mm Diameter: 1500 mm Bdodpfx Anjid Szcsdsi Foot pedal remote control available at an additional cost.

Condition: used, max. wheel diameter 0-200 mm max. module 25 Bodpetuxa Uofx Andodi min. module 0,5

Year of construction: 1998, condition: good (used), machine/vehicle number: 0159488169537, Offer 23293 Technical data: - Pressure capacity 300 KN - punches e.g. up to 30 mm Ø in steel 9 mm - or with special punching device up to 100 mm Ø in steel 2.5 mm - stroke infinitely variable 0 to 28 mm - stroke rate 26 to 36 1/min - throat 610 mm - Installation height 240 mm - Drive 400 V / 4 kW - Space requirement approx. W 750 x H 1650 x D 1350 mm - weight approx. 1300 kg - with: - foot switch - grain search device, Bdjdopuy H Dspfx Andji - support table with foldable stops W 1100 x D 850mm - shifting distance of the stops from the center of the punch - width between Li and Re approx. 470 mm x D 510 mm

Condition: ready for operation (used), An automated tube bending system with two Wafios bending heads and a Kuka twister robot is available. 1) Bending head Wafios RB20, bending direction: left and right, max. total tool height: 78mm, bending capacity: 360Nm, bending speed: 560°/s, bending radius: 57mm, repeat accuracy bending, turning and feed: +/-0.05mm. 2) Robot Kuka KR 16-2 KRC 2, axes: 6, payload: 16kg, max. reach: 1611mm, repeat accuracy: +/-0.05mm, weight: approx. 235kg. Including suspended magazine, Kuka control cabinet, outfeed conveyor, safety fence, movable control panel, docking station and work table. Documentation available. On-site inspection is possible. Bdjdpfx Anewwlkisdji

Condition: used, functionality: fully functional, machine/vehicle number: div., For Sale: Bdedpfowpww Eex Andji • 1x Kuris Pionier, spreading machine including spreading table, automatic servo-cutter, and band knife. Set price: €6,750 (disassembly by the buyer) • 1x Kuris Pionier, spreading machine including spreading table and band knife. Set price: €5,750 (disassembly by the buyer) 1x Bierrebi cutting machine, including blade preparation table. Price: €4,950

Year of construction: 1980, condition: used, pressure 80 t throat - mm stroke 50 mm table surface area 875 x 695 mm ram surface 350 x 355 mm ram adjustment 71 mm no. of strokes 30 - 90 Hub/min distance between columns 450 mm weight of the machine ca. 6,2 t dimensions of the machine ca. 2,0 x 2,1 x 3,2 m Bodpfx Anjdlcy Hjdsdi daylight (stroke down, ram adjustment above) 480 mm Further information: - the machine is currently being a partially overhauled - the machine was re-equipped with the following components: * separate control cabinet with touchscreen including cabling * new painting of the individual components in the dismantled state After the partial overhaul, the machine is safe for manual insertion open tool, a current UVV test is carried out before delivery and braking time measurement.

Condition: good (used), Year of construction: 2002, workpiece dia. 40 mm max. module 2 min. module 0,1 workpiece length - max. 665 mm weight 4,5 t spindle bore diameter 30 mm Control Siemens dia. of cutter bearing 20 mm Bdsdpfev Ucdvsx Andoi total power requirement 5,5 kW Technical data max. module 2 Pitch 0.5 - 25 mm Number of speeds multi-speed / multiple max. workpiece diameter40 mm max. workpiece length180 mm Milling cutter diameter max.80 mm max. milling cutter width12 mm Z-axis (milling length with counter point)90 mm Z-axis (milling length without counter point)113 mm Milling head swivelling angle30° / 30° Description Gear hobbing and thread cutting machine. LAMBERT - 124 CNC The machine is in a well-maintained condition.

Year of construction: 1980, condition: good (used), machine/vehicle number: 3253-80, Offer 22045 Approximate technical data: Bdodpektg Dhsfx Andei - Pressing force 10 t - Overhang 150 mm - Table size 520 x 320 mm - Adjustable table height 160 mm - Through-hole in the table 165 x 125 mm - Overall installation height 220 mm - Ram area 240 x 150 mm - Dowel hole in the ram 30 mm - Ram adjustability 40 mm - Stroke adjustment 4 - 60 mm - Stroke rate 130 1/min - Hydraulically actuated clutch - Two-hand operation - Electric foot switch - Separate control cabinet - Drive 380 V / 1.1 kW - Space requirement approx. W 1000 x H 1800 x D 1100 mm - Weight approx. 1300 kg

Year of construction: 1990, condition: used, pressure 80 t throat 250 mm Bodpfsfn Aqnjx Andodi stroke 5/95 mm table surface area 805 x 510 mm distance table/ram Hub unten - 400 mm tool hole in ram 45 mm ram adjustment 100 mm ram surface 360 x 300 mm no. of strokes 55 Hub/min total power requirement 5,5 kW weight of the machine ca. 4 t dimensions of the machine ca. 0,83 x 1,7 x 2,6 m

Condition: used, Year of construction: 1992, max. grinding diameter 0 mm grinding length 0 mm workpiece length 970 mm Bsdot Hwpaspfx Andodi total power requirement 12 kW weight of the machine ca. 5 t dimensions of the machine ca. m