Used Baljer & Zembrod Obx Iii for sale (797)

Condition: good (used), Year of construction: 2003, operating hours: 36,000 h, functionality: fully functional, machine/vehicle number: 1658, arm reach: 13,000 mm, load capacity: 2,500 kg, track width: 3,000 mm, cutting diameter: 1,500 mm, Equipment: cabin, crane, Baljer&Zembrod OBX II/III Year of manufacture: 2003 In daily operation Lodpoxpvr Sjfx Afujac Condition: Well maintained.

Condition: used, Year of construction: 2009, operating hours: 20,831 h, functionality: fully functional, arm reach: 15,200 mm, load capacity: 2,000 kg, track width: 3,000 mm, Equipment: cabin, crane, Baljer&Zembrod RUW with OBX IV Crane Machine number: 1795 Laodpfsy Ryglox Afuec Track gauge: 3.0 m Crane type: OBX IV Reach: 15.2 m Lifting capacity without grab: 2,000 kg / 15.0 m Grab: included Crane position: center Cab side: right For complete technical specifications, see the document "Technical Data" !! Sale on behalf of customer !!

Condition: ready for operation (used), Year of construction: 2013, For sale is a Baljer Zembrod OBX V-24 with up to 200m of rail. Ledpswxndnofx Afueac

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Equipment: cabin, crane, For sale: Baljer&Zembrod timber handling trolley. Lsdpfexb A Evjx Afujac Year of manufacture: 2000 Crane type: OBX II Maximum reach: 13.2 m Lifting capacity at maximum reach: 2,200 kg without grapple Air-conditioned operator cabin Power cable wound on reel Track length: approx. 80 m

Condition: used, Year of construction: 1984, operating hours: 69,889 h, functionality: fully functional, machine/vehicle number: 620, arm reach: 13,000 mm, load capacity: 1,250 kg, track width: 3,000 mm, Equipment: crane, For sale on behalf of a customer: an RSTW, year of manufacture 1984. It is equipped with a Jonsered crane with a reach of 13 meters. The machine is in good working condition and can be inspected. Lodpfoy Ry Rqex Afujac

Condition: used, Year of construction: 2005, operating hours: 27,000 h, functionality: fully functional, working width: 900 mm, number of blades: 5, power of feed motor: 22 W, ZE 905 in good condition. Sale by customer order! Max. pass-through 90 cm. Feed speed 32 m/min. Central lubrication. Regular service always performed. Runs very smoothly and can be inspected in operation. Machine is being replaced by a new one with Variopress system! Lsdpfx Aoy R Avvjfujac

Year of construction: 1998, condition: ready for operation (used), A complete sawmill including all peripheral equipment and conveyor units is available. 1) Log yard: Baljer & Zembrod Asterix sorting carriage, year of manufacture: 1998, operating hours: 16382h, rail system type: double-T-beam, rail system length: 66m, cross conveyor dimensions X/Y: 7300mm/3300mm, log train length: approx. 40m. Including cut-off table with scraper conveyor. The running rails of the rail system were renewed approx. 5 years ago. 2) Sawmill: 2.1) Linck U71 frame saw in reinforced design with larger main bearing and a general overhaul carried out in 1995. 2.2) Linck VAK carriage. Linck Vy auxiliary carriage in heavier-duty design. 2.3) Möhringer butt log reducer. 2.4) Linck splitter wedge. 2.5) 2x Diemer edging saw units, passage width: 500mm. 2.6) Dankert band saw, wheel diameter: 1200mm. 2.7) Hydraulic log carriages with 3 clamping supports, cutting length range: approx. 1800mm-5000mm. 2.8) Various roller conveyors. 2.9) Various cross conveyors, vibration troughs, etc. 3) Saw service room: 3.1) Albert sharpening machine with flank grinding for band saws. 3.2) Oppliger straightening machine for band saws. 3.3) Rolling bench for band saws. 3.4) Vollmer CNE sharpening machine for circular saws. 3.5) Meinert manual setting machine for circular saws. 4) 2x Hildebrand Brunner drying chambers, volume: approx. 30m³-60m³. 5) Schmid wood chip heating system, year of manufacture: 1995, heating output: 450kW. 6) Various Manitou rough-terrain forklifts. 7) Lewecke vacuum lifting machine. This is a complete sawmill. Documentation available. An on-site inspection is possible. Laedpfx Aszf Nbxefuoc

Condition: used, Year of construction: 2003, operating hours: 39,500 h, functionality: fully functional, machine/vehicle number: 1663, arm reach: 15,300 mm, load capacity: 2,000 kg, track width: 10,000 mm, Used gantry crane 10 meter track gauge Crane type: OBX IV 15.3 meters Lifting capacity: 2,000 kg at 15 meters without grab Grab: included Crane arrangement: central Cab side: left Power supply: conductor rail Power: 45 kW Lsdpfxsyyldzj Afujac !! Sale on behalf of customer !! Available from summer 2026

Condition: new, Year of construction: 2026, functionality: fully functional, feed rate Y-axis: 45 m/min, working width: 1,100 mm, number of blades: 5, power of feed motor: 22 W, Debarker ZE 1105 Vario Ledpfx Afjyyv Dfousac For round timber up to 110 cm! In the short wood variant from 1.80 meters log length! Perfect debarking result thanks to pressure adjustment of the knives during operation. All functions are performed hydraulically. Many adjustment options during operation, e.g. via radio remote control. Opening of knives in case of malfunctions at the push of a button. As a full-service supplier for log yards, we can offer you an individual and non-binding quotation for complete log yard solutions.

Condition: used, Year of construction: 2003, operating hours: 36,000 h, functionality: fully functional, machine/vehicle number: 1658, arm reach: 15,200 mm, load capacity: 2,500 kg, track width: 3,000 mm, Equipment: cabin, crane, Year of manufacture: 2003 Laodpjyglfdefx Afuoc Machine number: 1658 Track width (m): 3.0 Crane type: OBX II Reach: 15.2 m Lifting capacity without grab: 1,900 kg / 15.2 m Grab: included Crane position: in front of the cabin Cabin side: left Saw: 1.3 m Alpha !! Sale on behalf of customer !!

Year of construction: 1994, condition: good (used), Baljer Zembrod root reducer Lsdpfx Aen Skz Tefueac with radio remote control

Condition: excellent (used), Baljer & Zembrod roundwood handling, sorting, transport and sawing vehicle - German production - measuring the length of the wood - automatic cutting cycle TECHNICAL PARAMETERS: - max log diameter 1000 mm - crane reach max 9200 mm - crane working angle 225" - rotating head 360 " - lifting capacity: 2000mm - 2560kg 7240mm - 1680kg 9200mm - 1330kg - dimension of the hauler 6000x2150 mm - hauler with two-sided hydraulic discharge - pump motor power 11 kW - feed motor power 8.6 kW - feed speed 90 m/min HOLTEC FS 121 SAW - log length measurement - working length 1000 mm - hydraulic stroke of the guide - manual and automatic operating mode - log lifting - integrated sawdust extraction 2.2 kW - drum for winding the cord Laodpelimriofx Afuoc Transport dimensions 12.5x2.4x2.4m weight 12000 kg

Condition: used, Year of construction: 1993, operating hours: 47,000 h, functionality: fully functional, arm reach: 13,000 mm, load capacity: 2,500 kg, track width: 3,000 mm, Equipment: cabin, crane, We offer this used Baljer & Zembrod machine for log yards, year of manufacture 1993. Track width: 3m Crane type: OBX II Lifting capacity without grapple: 1900kg/15.2m Grapple: without Ledpfoyz Twrsx Afusac Crane position: Rear of cab Cab side: Left Saw: 1.3m Alpha With HEB500 running rail Cutting bench with waste scraper chain If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2007, Fast root de-sharpening in cross-feed mode 75 kW milling shaft Lasdpeyyk D Tsfx Afuec Including hydraulics

Condition: used, Year of construction: 1992, operating hours: 5,093 h, functionality: fully functional, load capacity: 4,000 kg, Equipment: crane, Baljer & Zembrod Sorting Line – 75 m, Operational, Available at Short Notice For sale is a used sorting line from the manufacturer Baljer & Zembrod, model AS/30V-L.D. The system comes from active operation and was decommissioned as part of a planned site relocation. The sorting line is fully functional but shows typical signs of wear consistent with its age. Note: The system was previously reserved and is now available again. Technical Data Model: AS/30V-L.D Year of manufacture: 1992 Operating hours: approx. 5,093 Condition: used, operational Defect: Saw blade is defective Length of crane runway: approx. 75 m Crane runway width: 3 meters Load capacity: 4 tons (see load capacity diagram in the photos) Length of round timber staging: approx. 23.5 m Description The machine is suitable for sorting round timber and was in use until recently. The sorting line has been regularly serviced but, due to its age, is in average visual condition. Hydraulics and electrics function reliably. The saw blade is defective and should be replaced or repaired. Fields of Application Round timber sorting Sawmills Timber processing Biomass and round timber logistics Availability The machine is dismantled and stored outdoors and can be inspected by appointment. Immediate takeover is possible. Ljdpjyu U Rlefx Afuoac Inspection under operating conditions (powered up) is possible until early week 14. Afterwards, the location will be disconnected from the power supply due to new building construction. Further technical details, photos, or a site visit can be provided on request.

Condition: used, Equipment: crane, Baljer & Zembrod, ASX I, slewing ring from Baljer & Zembrod renewed, price 13,000 EUR ex works. Laedexb Upmepfx Afusc

Condition: excellent (used), Electrical installation tester from the renowned German manufacturer Gossen Metrawatt The PROFITEST MXTRA model is designed for professional measurement of electrical installations and safety inspections. The device is used by electricians, service technicians, and for routine installation inspections. ⸻ TECHNICAL SPECIFICATIONS Lodjywcr Depfx Afueac Manufacturer: Gossen Metrawatt Model: PROFITEST MXTRA Supply voltage: 230 V Measurement category: CAT III 600V, CAT IV 300V Professional electrical installation tester ⸻ INCLUDED IN THE SET PROFITEST MXTRA tester measurement cable adapter carrying bag The exact set is shown in the photos ⸻ APPLICATIONS electrical installation measurement safety testing installation inspections electrical service ⸻ CONDITION used visually in good condition

Condition: excellent (used), Year of construction: 2001, spindle bore: 20 mm, Machine in perfect condition. Can be inspected during production any time Lodpfx Aou Ivw Tofusac

Condition: new, Technical Data for the Shelf Panel: Shelving System: Meta Type: Clip Scope of delivery includes: 01x Shelf panel, used Shelf designation: MS150-III Material finish: Sendzimir galvanized Lasdpfjy H Hkpsx Afusc Dimensions: 1,000 x 500 x 40 mm Weight: 3.41 kg/piece Maximum load per shelf: 150 kg, with evenly distributed load. 04x Shelf support brackets 40 mm, used, galvanized silver, suitable for steel shelves with 40 mm upturned edge Finish: Zn blue + therm 4h, galvanized Color: Silver Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping of this item is required, additional costs will apply. These can be requested individually depending on the delivery location and scope of delivery.

Condition: used, Technical data for the shelf panel: Lajdeyk T E Tspfx Afusc Shelving system: Meta Type: Clip Included in delivery: 01x Shelf panel, used Panel designation: MS150-III Material finish: Sendzimir galvanized Dimensions: 1,000 x 600 x 40 mm Weight: 3.93 kg|pc. Max. load per shelf panel: 150 kg with evenly distributed load Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information on the item: This item is only available for collection. If transportation or shipping of this item is required, additional costs will apply. These costs can be queried separately with us depending on the delivery location and the scope of delivery.

Condition: new, Technical data for shelf panel: Ledpfx Asyk R Rmjfusac Shelving system: Meta Type: Clip Scope of delivery: 01x shelf panel, used Panel designation: MS150-III Material colour: Sendzimir galvanized Dimensions: 1,300 x 600 x 40 mm Weight: 5.11 kg/unit Maximum load per shelf panel: 150 kg with evenly distributed load Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping of this item is required, additional costs will apply. These can be requested from us individually, depending on delivery location and scope.

Condition: like new (used), Year of construction: 2026, operating hours: 10 h, functionality: fully functional, machine/vehicle number: OBX26601, warranty duration: 36 months, input voltage: 220 V, year of last overhaul: 2029, DGUV certified until: 12/2026, working width: 4,000 mm, conveyor belt width: 640 mm, type of input current: AC, total width: 1,020 mm, total length: 4,500 mm, total height: 1,450 mm, Equipment: CE marking, OBAKING Small & Medium Bakery idea choice equipments OBAKING automatic croissant making set OBX-C9000 Characteristics and stability of OBAKING puff pastries bread machines Lodjzdxwyopfx Afueac Croissant pastries dough sheeting and moulding machine The Dough press and puff pastry machine can achieve fully automatic computer-controlled Dough pressing speed, and the Dough pressing process is highly automated. It adopts a larger diameter pressure roller design, making the pressure surface softer and more uniform. PLC control system saves labor costs and time, simplifies storage configuration, reduces errors, and achieves large-scale standardized production. Ensure that the dough is rolled evenly and there is no uneven thickness. The thickness range of the pastry can be customized according to the flavor and taste of the product The machine is also equipped with an automatic powder spreading device, which timely spreads powder according to the dough situation and controls the amount of powder spread to avoid excessive powder spreading during the rolling of the dough, resulting in uneven baking of the croissants. OR Pastries breads ,palmier products etc

Condition: excellent (used), This makes FAG Detector III extremely useful for detecting: - unbalance and alignment errors. - rolling bearing defects. - damage to gears. Lsdpfx Aovb Id Iofusac

Condition: excellent (used), Year of construction: 2007, FOD BYDGOSZCZ Shaft Multi-Rip Saw* DPPD III 50E 530/150 Catalogue number: 7405 TECHNICAL DATA - Maximum cutting height: 150 mm - Maximum element width: 700 mm - Working width of arbor with saw blades: 530 mm - Maximum blade diameter: 450 mm (currently fitted: 350 mm) - Blade bore diameter: 90 mm From above: - Kickback pawls - 2 toothed feed rollers From below: - 2 smooth feed rollers - Arbor with saw blades - Smooth feed roller - 4 feed speed options - Feed motor approx. 2 kW - Main motor 30 kW - Machine dimensions (L/W/H): 2400x1700x1900 mm - Weight approx. 3000 kg – Made in Poland – Used machine, condition: very good Net price: 38,900 PLN Lasdpfsy Rrywsx Afujc Net price: 9,260 EUR (calculated at an exchange rate of 4.2 EUR) (Prices may change in case of substantial exchange rate fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and trade names are used solely for informational purposes to facilitate identification of the product. We only resell items that were previously put on the market by the manufacturer. We do not have any business relations with the manufacturer.

Condition: used, Year of construction: 1982, sheet width 3100 mm plate thickness 2 mm Laodpeyv I T Dsfx Afuoc 90 mm adjustable bending rolls 90 mm weight of the machine ca. 4000 kg