Used Band Saw Machine 270Mm for sale (66,747)

Condition: new, Year of construction: 2026, The CORMAK MCB350HD cutter in this segment of machines is the largest cutter with very large cutting capacity of 350x260. It has a more powerful engine and a convenient control panel. Machine arm made of one-piece cast iron with additional ribs for greater rigidity. Reversible cutting angle from -45° to 60°. Machine characteristics The CORMAK MCB350HD metal band saw with CE enables cutting in a plane perpendicular to the axis of the cut material or at any angle in the range from -45 to +60 degrees. The cut piece can be fed manually or through any feeding device. The feed during cutting is gravitational based on the principle of oil flow in a two-chamber hydraulic cylinder. The operator starts the machine by pressing the start button and sets the cutting speed. When the cut is complete, the machine automatically stops and the operator raises the arm manually to the starting position. Feeding is done manually. This model is used for both unit and serial production, and due to its robust construction, it can cut a wide range of materials, including stainless steel, tool steel, solid materials and profiles. The device enables angular cutting of the material by turning the arm to the left and right. The cutter arm made of a uniform cast iron together with the 27 mm wide cutting band used in this cutter allows you to fully perform multi-series cuts of both profiles and solid materials. The arm is equipped with an automatic blade tension sensor, it is tilted by 25 degrees, which increases the life of the blade. A cleaning brush is attached to the bottom of the arm for perfect blade cleanliness and function. The drive of the machine is transmitted through a worm gear filled with gear oil. The machine has a three-phase motor with double windings and two cutting speeds. Motor thermal protection. This cutter has a very large range of work when cutting at an angle from 45º to the left to 60º to the right. The machine has two speeds of the cutting band: 32 and 72 m/min. A cutter with an automatic, smoothly adjustable, gravitational arm feed downwards. Construction: the frame, vice and rotating table are cast iron. Closed emulsion cooling system with fluid distribution to the blade guides. The machine is equipped with a bumper with a ruler for setting the length of the cut material. At the back of the machine there is a roller feeding the material to be cut. Safety during the cutting process is ensured by an electrical installation that meets all CE requirements. The machine has a limit switch that stops the machine after the cutting process is finished, an emergency switch, the so-called "safety mushroom", a series of microswitches that turn off the machine when, for example, we open the cover of the belt transmission or the cover of the cutting band. Technical data MINIMUM CUTTING DIAMETER - ø5mm MINIMUM LENGTH OF MATERIAL IN VISE - 100mm DISTANCE OF THE VISE BASE FROM THE GROUND - 940mm CUTTING BAND DIMENSIONS - 2950x27x0.9mm TOTAL POWER - 2.2kW TAPE SPEED - 36 / 72 m min-1 Godei D Di Sepfx Aiasiu DRIVE/PULLEY DIAMETER - 330mm DIMENSIONS - 2000x1330x2020mm WEIGHT - 540kg ANGLE PIPE PROFILE SQUARE 0º-- ø270 350 × 240 260 x 260 45º R ø230 230 × 150 210 x 210 45º L ø200 200 × 170 170 x 170 60º R ø140 140 × 140 140 x 140 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, NEBES TM 275 Band Saw Machine - 400 v Three-phase NEW "CE" INDUCTION motor Cast iron structure Adjustable cutting angle from 0° to 60° All cast iron structure Electric pump for blade lubrication and cooling Oil-bath blade tensioning gauge Front controls and two cutting speeds Deviator for exclusion of coolant pump Blade guide with carbide skids (H.M.) Round cut 0° 220 mm Square cut 0° 200 x 200 mm Flat Cut 0° 230 x 185 mm Round cut 45° 150 mm Square cut 45° 150x150 mm Flat Cut 45° 150x200 mm Round Cut 60° 90 mm Square Cut 60° 90x90 mm Flat Cut 60° 90x120 mm HP 1.3 Voltage 400 V Blade size 2450 x 27 x 0.90 mm Giedpfxeh Nm Nce Aiaju Weight 265 kg

Condition: new, Year of construction: 2026, CORMAK HBS320 band saw for metal provides cutting at any angle from -45° to + 60°. The element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Band saw perfect for cutting tubes, profiles and other materials. Machine characteristics CORMAK HBS320 band saw for metal provides cutting at any angle from -45° to + 60°. The element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Band saw perfect for cutting tubes, profiles and other materials. Operator starts the machine by pressing the START button and sets cutting speed. After the cycle is finished the machine automatically stops and the operator lifts the arm to the starting position. The band saw arm is made of massive, uniform cast iron, and together with 27 mm wide cutting band enables high quantity cutting of structural steel, stainless steel and tools. The vice is located in an adjustable bed and equipped with a quick clamp. Blade guides are equipped with a ball bearings system and cemented carbides, ensuring excellent cutting precision and straight cut. It has a huge impact on the band guiding, its durability, accuracy and cutting quality. The carbide guiding drastically reduces the wear of both the machine and the blade. The base is enclosed, constituting a rigid welded body of steel sheets. A separate flood coolant container with an electropump is inside. The shape of the base upper part constitutes a tank for flood coolant draining and chips produced during cutting. Cast iron workbench is attached to the base, with a double-sided swivel arm and a control panel. The feed speed is controlled by the control panel. There are 2 cutting band speeds: 44 and 88 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Giodpfsi D Dgwjx Aiasu Ø max 260 mm /perpendicular cutting H×B max 320×160 mm /perpendicular cutting Power supply - 3–phase, 400V Total power - 1,5 kW Arm lowering control - hydraulic cylinder Band dimensions - 2740×27×0.9 mm Band speed - 44 / 88 m/min Vice base height - 920 mm Dimensions - 1400×880×1550 mm Weight - 280 kg Cutting parameters Angle 0º ---- ø260 320×160 255×255 45º R ø210 210×200 210×210 60º R ø135 135×130 130×130 45º L ø160 220×130 160×160 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: used, Year of construction: 1998, total height: 2,550 mm, total length: 1,800 mm, total width: 1,800 mm, Colour: Grey Weight: 2.000 kg - Year: 1998 - Documentation available: No - CE certificate present: No - Serial number: At10548 - Saw direction: vertical - Main motor power [kW]: 18.5 - Wheel diameter [mm]: 900 - Max. cutting to feed roller opening [mm]: 240 - Max. cutting to stop opening [mm]: 230 - Max. cutting width to column [mm]: 270 - Max. total opening [mm]: 470 - Max. cutting height [mm]: 350 - Table width [mm]: 900 - Table length [mm]: 760 - Max. band saw width [mm]: 80 - Feed roller type: Manual - Extraction port diameter [mm]: 180 Gedpfsyrpmcjx Aiasiu - Options: Tiltable fence - Voltage [V]: 400 - Current consumption [A]: 32 - Fuse [A]: 40 - Power [kW]: 19.5 - Transport dimensions: 1800mm x 1800mm x 2550mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1998, total height: 2,550 mm, total length: 1,800 mm, total width: 1,800 mm, Colour: Grey Weight: 2.000 kg - Details: - └ Description: Shaft of the drive rollers is loose with the machine - Year: 1998 - Documentation available: No - CE certificate present: No - Serial number: AT10548 - Saw direction: vertical - Main motor power [kW]: 18.5 - Wheel diameter [mm]: 900 - Max. cutting to feed roller opening [mm]: 240 - Max. cutting to stop opening [mm]: 230 - Max. cutting width to column [mm]: 270 - Max. total opening [mm]: 470 - Max. cutting height [mm]: 350 - Table width [mm]: 900 - Table length [mm]: 760 - Max. band saw width [mm]: 80 - Feed roller type: Manual - Extraction port diameter [mm]: 180 Giedpfx Aeym Rt Hjiaeu - Options: Tiltable fence - Voltage [V]: 400 - Current consumption [A]: 32 - Fuse [A]: 40 - Power [kW]: 19.5 - Transport dimensions: 1800mm x 1800mm x 2550mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 2000, The machine is being sold on behalf of a customer and can be inspected under power. Machine location: Czech Republic (Brno) Band saw automatic Behringer HBP 430A Year of manufacture: 2000 Godpfx Asylmlioiasiu Saw band dimensions: 5800x54x1.3 mm Working area: round 430 mm / flat 430 x 430 mm Smallest material dimension: 15x10x15 mm Shortest cut length: 8 mm Cutting speed: 17 – 110 m/min Saw drive motor power: 7.5 kW Connected load: 11 kW Dimensions (LxWxH): 410 x 230 x 210 cm Weight: approx. 3400 kg

Condition: good (used), Year of construction: 2018, machine/vehicle number: 431-92, Offer 26142 Technical data: - Cutting range at 90°: round 350 mm - Cutting range at 90°: flat 320 x 460 mm - Miter angle adjustable from 90° to 30° - Cutting range at 45°: round 280 mm - Cutting range at 45°: flat 350 x 280 mm - Cutting range at 45°: round 180 mm - Material feed system - Material support height approx. 740 mm - Saw band dimensions 4350 x 34 x 1.1 mm - Cutting speed adjustable from 25 to 90 m/min - Hydraulic lifting and lowering of the saw frame - Cutting pressure continuously adjustable - Material clamping device Gsdpjzc Izaofx Aiaeiu - 3 roller conveyors, total length 1400 mm - 1 roller stand - Total motor power 400 V / 4.8 kW - Space requirement approx. W 1400 x H 1400 x D 2200 mm - Weight approx. 1900 kg

Condition: ready for operation (used), Year of construction: 1980, Band saw machine Make KÖLLE Type:ST 105 Year 1980 overhang 1050 mm with saw band - welding device IDEAL . Giodpfx Aismp Trwoasu Infinitely variable speeds. Machine ready for use condition.

Condition: good (used), Year of construction: 1992, Automatic band saw JAESPA Type:W400 AZ Control Minipos 807 year 1992 Cutting diameter round material max. 400mm Sägebandlänge:5500X32X1,1mm Feed automatic cut length min.20mm Chip conveyor Total power requirement 4 Kw Godpfogf H Sajx Aiajiu Weight approx.2500kg Accessories 2X saw blades, roller table 6m motor drive, machine documentation available. Footprint : 2,8X2,8X2m

Condition: used, Year of construction: 2000, total power requirements: 2,2length of saw band: 3200cutting area width: 3200messurements (LxWxH): 2000 x 7000 x 1400weight approx.: 1500saw band dimension: 27 x 0,9Metal Bandsaw Bauer HS320GLZA Giodpfxjy Nuhno Aiasu Used horizontal metal bandsaw by Bauer, model HS320GLZA, year of manufacture 2000. The machine is equipped with automatic feed and is suitable for precise cutting of metal, pipes, and profiles in industrial and workshop use. Approx. dimensions: 200 x 700 x 140 cm.A roller conveyor system with a length of approx. [ 5000 mm] is included. The machine is used and located in our workshop. Viewing is possible on site. Location: 3071 Böheimkirchen, Neustiftgasse 34.

Condition: excellent (used), Frietsch SAWMILL MACHINERY We buy and sell, overhaul, refurbish, and paint KASTO saw machines. Dear Sir or Madam, We have over 40 years of experience with KASTO saw machines and specialize in overhauling these machines. We can also handle KASTO controls! The machines are overhauled by qualified personnel according to KASTO factory standards. We also source KASTO saw machines according to your specifications for machine overhauls. Excellent price-performance ratio through professional machine overhauls. Gsdpfx Aijfh Hukjaeiu

Condition: new, Band saw machine Make: OPTIMUM Model: S 275 NV Art.Nr.: 3300265 Condition: new machine Section (round): 225 mm Cutting speed: 20-90 m / min equipped as standard with: Gedpfx Ajdynpceiaeiu -Horizontal vise -Back fence - automatic shut-off after the end of the cut -Späneräumbürste -Coolant system -Manual

Condition: used, Year of construction: 1991, machine/vehicle number: 113307651086088, functionality: fully functional, cutting height (max.): 260 mm, total height: 2,100 mm, total length: 2,200 mm, total width: 2,100 mm, saw band length: 4,115 mm, saw band width: 38 mm, The Kasto SSB 260 VA is a fully automatic bandsaw machine designed for precise serial cuts of solid material, pipes, and profiles. It stands out for its compact design and high cutting accuracy. The machine features hydraulic workpiece clamping, automatic feed, and a coolant system. Additionally, a chip conveyor is integrated to increase efficiency. Cutting range round: 10 – 260 mm Cutting range square: 260 x 260 mm Smallest cut-off length: 5 mm Single feed: 600 mm Multiple feed: max. 5,400 mm Cutting speed: 15 – 125 m/min (stepless) Saw blade dimensions: 4,115 x 38 x 1.3 mm Drive power: 4 / 6.5 kW Machine weight: 2,110 kg Machine dimensions (LxWxH): approx. 2,160 x 2,080 x 2,015 mm Gisdpfxjwqw Tvs Aiaeu

Condition: new, Year of construction: 2026, CORMAK HBS275 band saw, equipped with a hydraulic cylinder, a cooling system and an arm swivelling up to 60º, together with blades from renowned German company Röntgen, is used commonly in ironworking, where precision, quality and cutting speed are essential. Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or with any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Carbide guiding drastically reduces the wear of the machine and blades. Machine's arm made of uniform cast iron as well as a 27 mm wide cutting band are capable of low and high quantity cutting of profiles and other materials. The vice is located in an adjustable bed, equipped with a quick clamp. Blade guides have cemented carbide plates and roller bearings. Its these cemented carbide guides that provide cut precision and straightness. The arm, positioned at an angle of 25º, thus increasing blade durability. To the bottom of the arm a brush wire is attached, ensuring clean and functional brush. Machine's drive is transmitted through a worm drive. A 3-phase motor with 2 cutting speeds and motor thermal protection. This cutting machine also has a strain gauge - a band tension sensor and an automatic switch-off in case the cutting band breaks. Upper part of the base constitutes a tank for flood coolant draining and chips produced during cutting. A cast iron workbench is attached to the base, with a swivel arm and control panel on separate arm. The main cutting move in the cutting process is moving the cutting band and the arm lowering feed. The arm lowering speed (the cutting speed) is adjusted with the hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 37.5 and 75 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Total power 1.5 kW Power supply 400V 50Hz Arm lowering control hydraulic cylinder Band dimensions 2455 x 27 x 0.9 mm Band speed 37.5/75 m/min Vice base height 900 mm Weight 215 kg Giodpfxjudi Uno Aiaju Angle 0º ø220 260 x 140 200 x 200 45º R ø160 160 x 140 160 x 160 60º R ø100 120 x 100 100 x 100

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, saw blade diameter: 550 mm, grinding wheel diameter: 150 mm, total width: 1,200 mm, total length: 1,200 mm, total height: 1,250 mm, type of input current: three-phase, input current: 4 A, input frequency: 50 Hz, grinding spindle motor power: 1,900 W, input voltage: 400 V, overall weight: 220 kg, spindle speed (min.): 3,700 rpm, Equipment: rotational speed infinitely variable, Loroch SW 550 machine in good working condition, ready for operation. The machine is suitable for professional workshop use. - saw blade dia. from 100 - 550mm Gjdpfx Ajy Sgqtjiasiu - suitable for HSS saw blades for wood and metal cutting. - HSS saw blades geomeries - A, B, BW, C - Water cooling - additional device for shaping band saw blades - Manual in Czech language (but it is simple machine)

Condition: excellent (used), Band saw grinding and setting machine VOLLMER model BN30TS Gijdpfx Ashhdaxjiasu

Condition: excellent (used), Deburring machine for band saw blades IDEAL model SM60 to remove the residual welding bead. Gisdpfx Aiexk Tb Toaeu

Condition: good (used), Alber sharpening machine for band saw blades saw blade width 50 - 206mm Giodjglui Aepfx Aiaju tooth pitch 20 - 50mm

Condition: excellent (used), Fully automatic band saw graderOppligerType PBS 860 Gsdpjd Sr Sisfx Aiasiu

Condition: not inspected (used), I sell the saw blade and saw band sharpening machine Stankoimport TCPA-6, Made in Russia. Giodpfx Aod Hx R Doiaeu

Condition: new, Year of construction: 2026, The BS370H is a powerful and reliable semi-automatic band saw with miter cuts from -45° to +60° and a hydraulically controlled vice and saw arm. The machine is irreplaceable in every locksmith's workshop and is ideal for cutting pipes, profiles and solid materials. The belt guides are equipped with special carbide plates and bearings. This has a huge impact on belt guidance, belt life, straightness, accuracy and cut quality. The carbide guide greatly reduces machine and saw blade wear. The machine is equipped with an efficient cooling pump with a closed coolant circuit. The drive of the machine is transmitted via a worm gear. The machine has a three-phase motor with two cutting speeds and motor thermal protection. The cutter is equipped with a strain gauge - a tape tension sensor and an automatic switch-off in the event of the cutting tape breaking. Giodpfx Aijycqhcjaeu The shape of the upper part of the base is a tub for draining the coolant and catching chips formed during the cutting of the material. A cast iron work table with a swivel arm and a control panel on a separate arm is attached to the base. In the cutting process, the main cutting movement is the moving of the cutting band and the arm's lowering feed. The speed of the arm's descent (cutting speed) is regulated by a hydraulic cylinder. Cutter for precise, professional work. Torsion-resistant, rigid ductile iron arm and saw body. Double sided quick lock vice In semi-automatic mode, after pressing START, the hydraulic vise will clamp the material, the hydraulics will lower the saw arm, the limit switch will give the signal to finish cutting and the hydraulics will raise the saw arm. Technical parameters Size of the cutting band 3160 x 27 x 0.9 mm Belt tension mechanical (manual) Belt speeds 34.68 m / min Arm Drop Adjustment stepless - hydraulic cylinder Height of vice base 890 mm Diameter of saw wheel 380 mm Power 3phase, 400V Main engine power S1- 1,5/S6 -1,9kW Cooling pump motor power 46W Dimensions with base 1850x950x1500 (2050) mm Weight 491 kg

Condition: new, Year of construction: 2026, BAND SAW MACHINE CORMAK BS912N Specification: The material to be cut can be fed manually or by any mechanical device, while the tool feed is automatic. The lowering speed of the saw arm is adjusted using a hydraulic cylinder. The appropriate speed is achieved via a valve regulating oil flow between the cylinder chambers. The desired blade speed is obtained by changing the transmission ratio on the belt pulleys between the worm gearbox and the drive motor. A coolant tank with an electric pump is located in the base. High precision and solid construction place this machine among the leading band saws in its class, offering a large cutting capacity of up to 230 mm and angle cutting from 0° to 45°. The CORMAK BS912N band saw, thanks to innovative improvements combined with high-quality bimetal blades, is widely used in metalworking shops where precision, quality, accuracy, and cutting speed are essential. The cutting angle is set using a swivel vise in the range of 0°–45°. The vise features massive walls made of durable cast iron. At the rear of the vise, there is an angle scale for quick and convenient angle adjustment. Both blade guides are equipped with a cooling system that supplies coolant to the blade and the workpiece. Gedpey En E Sofx Aiaeiu This model includes a convenient blade tensioning handle and a quick-release vise clamp for the workpiece. The saw arm features a blade tension indicator and a chart for selecting blade tooth pitch and cutting speed depending on the type of steel being cut. At the lower position of the arm (after completing the cut), the blade drive is automatically switched off via a modern limit switch. Safety during operation is ensured by an electrical system that meets all CE requirements. The machine is equipped with a limit switch that stops it after cutting, an emergency stop button (“mushroom type”), and multiple micro-switches that shut down the machine if, for example, the belt guard or blade guard is opened. Additionally, the machine is equipped with a wire brush that cleans chips from the blade, preventing clogging and improving cutting efficiency. The blade guides are fitted with special carbide plates and bearings, significantly improving blade guidance, durability, straightness, accuracy, and cutting quality. Carbide guiding greatly reduces wear of both the machine and the blade. The arm, made of profiled ductile cast iron, ensures rigidity during operation and absorbs vibrations. The control panel is mounted on the saw arm. Technical Data: Technical specifications Motor 230V~, 50Hz, 1100W 400V~, 50Hz, 1100W Belt dimensions 2655x27x0.9 mm Belt speeds 24/36/49/71 m/min Cutting angle range From 0 to +45 degrees Machine packaging dimensions 1420x500x1150 mm Weight 151/202 kg MANUAL IN ENGLISH

Condition: new, Year of construction: 2026, Band saw for metal with optimal cutting range, commonly used in carpentry, production and craft facilities. Machine description CORMAK BS 128HDRC band saw for metal with optimal cutting range, designed for professional craftsmen, distinguished by efficiency and easy handling. Arm swivelling in both directions is a very big advantage in angled cutting. Despite small dimensions, its weight (103 kg) makes it stable and vibration-free during cutting materials. Element cut can be fed manually or via feeding machines. Feed during cutting is gravitational, with oil flow in a two-chamber hydraulic cylinder. Arm lowering control is ensured by a valve controlling oil flow between chambers of cylinder. Straight cut is achieved by a set of bearings guiding the band. Machines are equipped with a limiting switch and ON/OFF switch compliant with IP54. Swivelling saw frame for double bevelling within -45o - + 60o. Technical data Cutting band size 1640×13×0.65 mm Cutting speed 23/34/54 m/min Power 230V Arm lowering control stepless, through hydraulic cylinder Cutting range -45° - + 60° Dimensions 942×442×548 mm Weight 103 kg Maximum cutting range [mm] Angle 0° ø125 mm 150×100 mm 120×120 mm -45° ø95 mm 95×76 mm 85×85 mm +60° ø50 mm 56×55 mm 45×45 mm Gjdpeudim Dofx Aiasiu Default equipment 3rd generation hydraulic cylinder Table for vertical cuts Quick-clamping vice Coolant system Workpiece limiter - bumper Automatic limiting switches Modern thermal engine protection Mobile base with four wheels User manual Additional 2 blades M42, 5L Emulgol Magnetic chip collector ZW580

Condition: new, Year of construction: 2026, Band saw for metal with optimal cutting range, commonly used in carpentry, production and craft facilities. Machine description CORMAK BS 128HDRC band saw for metal with optimal cutting range, designed for professional craftsmen, distinguished by efficiency and easy handling. Arm swivelling in both directions is a very big advantage in angled cutting. Despite small dimensions, its big weight (103 kg) makes it very stable and vibration-free during cutting larger materials. Element cut can be fed manually or via feeding machines. Feed during cutting is gravitational, with oil flow in a two-chamber hydraulic cylinder. Arm lowering control is ensured by a valve controlling oil flow between chambers of cylinder. Straight cut is achieved by a set of bearings guiding the band. Machines are equipped with a limiting switch and ON/OFF switch compliant with IP54. Swivelling saw frame for double bevelling within -45o - + 60o. Technical data Cutting band size 1640×13×0.65 mm Cutting speed 23/34/54 m/min Power 0,55 kW/230V Arm lowering control stepless, through hydraulic cylinder Cutting range -45° - + 60° Dimensions 942×442×548 mm Gijdpfjmrp Tlsx Aiaeu Weight 103 kg Maximum cutting range [mm] Angle 0°.....ø125 mm.....100×150 mm....100×100 mm -45°.....ø90 mm.....90×75 mm.....90×90 mm +45°.....ø90 mm.....90×75 mm.....90×90 mm +60°.....ø55 mm.....55×55 mm.....55×55 mm Default equipment 3rd generation hydraulic cylinder Table for vertical cuts Quick-clamping vice Coolant system Workpiece limiter - bumper Automatic limiting switches Modern thermal engine protection Mobile base with four wheels User manual The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, Band saw for metal with optimal cutting range, commonly used in carpentry, production and craft facilities. Machine description CORMAK BS 128HDRC band saw for metal with optimal cutting range, designed for professional craftsmen, distinguished by efficiency and easy handling. Arm swivelling in both directions is a very big advantage in angled cutting. Despite small dimensions, its weight (103 kg) makes it stable and vibration-free during cutting materials. Element cut can be fed manually or via feeding machines. Feed during cutting is gravitational, with oil flow in a two-chamber hydraulic cylinder. Arm lowering control is ensured by a valve controlling oil flow between chambers of cylinder. Straight cut is achieved by a set of bearings guiding the band. Machines are equipped with a limiting switch and ON/OFF switch compliant with IP54. Swivelling saw frame for double bevelling within -45o - + 60o. Technical data Cutting band size 1640×13×0.65 mm Cutting speed 23/34/54 m/min Power 400V Arm lowering control stepless, through hydraulic cylinder Cutting range -45° - + 60° Dimensions 942×442×548 mm Weight 103 kg Maximum cutting range [mm] Angle 0° ø125 mm 150×100 mm 120×120 mm -45° ø95 mm 95×76 mm 85×85 mm +60° ø50 mm 56×55 mm 45×45 mm Default equipment 3rd generation hydraulic cylinder Table for vertical cuts Quick-clamping vice Coolant system Workpiece limiter - bumper Automatic limiting switches Modern thermal engine protection Mobile base with four wheels User manual Giedsy Emgbopfx Aiaeu Additional 2 blades M42, 5L Emulgol Magnetic chip collector ZW580