Used Bauknecht Yl30/2-7 for sale (88,612)

Condition: used, Three-phase motor, electric motor Blodocwtprjpfx Abtel -Power: 37 kW -Speed: 2945 rpm -Shaft: Ø 55 mm -Construction: B3 -Protection class: IP 23 -Dimensions: 710/450/H430 mm -Weight: 185 kg

Condition: good (used), three-phase motor, electric motor Bjdpfx Absd E Tfrjtoll -Handover: in current condition as viewed -Note: the base of the engine has been welded once -Power: 52/143 kW -Speed: 1485/2970 rpm -Shaft conical: Ø 70 to 60 mm 125 mm long -Design: B3 -Protection class: IP 54 -Dimensions: 1130/920/H630 mm -Weight: 876 kg

Condition: excellent (used), Year of construction: 2015, SEPRO SR SUCCESS 7 S3 TRANS Visual 2 (2015) Linear cartesian robot Euromap 67 VISUAL 2 Number of axis: 3 Reach: 1000 mm Payload: 3 kg X= 1000 mm Y= 400mm Z= 800 mm R1 = 0-90 Bljdpfxjzw Edye Abtsl

Condition: excellent (used), Year of construction: 2014, SEPRO SR SUCCESS 7 S3 TRANS Visual 2 (2014) Linear cartesian robot Euromap 67 Bedszw Efdjpfx Abtell Number of axis: 3 Reach: 1000 mm Payload: 3 kg

Condition: used, Year of construction: 1998, functionality: fully functional, FOUR IPSEN TQ 2/7 - Completely refurbished in 2010 - Usable dimensions: 910 x 600, height = 500 - Gas heating via radiant tubes - Control (load and atmosphere) via PROTHERM 500 system Bjdpfx Ajzub Ayobtjll + IPSEN ENDOTHERMIC GENERATOR 2018 (new retort in 2023) - Gas heating - Reaction gas = natural gas

Condition: like new (used), Year of construction: 2025, operating hours: 2,025 h, functionality: fully functional, machine/vehicle number: 25-168-T-402; 25-068-F-100-P, overall weight: 200 kg, Equipment: documentation/manual, A Soco System packaging line is offered, consisting of an F-100-P bottom flap folding machine and a T-402-5-2-9 carton sealing machine. Minimum carton width: 320 mm, maximum carton width: 520 mm, maximum carton length: 900 mm, machine dimensions X/Y: approx. 750 mm/1150 mm. Soco T-402 5-8-7 carton sealing machine, carton length range: 200 mm-750 mm, carton width range: 120 mm-460 mm, carton height range: 95 mm-470 mm, sealing capacity: 18/min, maximum tape roll diameter: 385 mm, weight: approx. 200 kg. Includes safety guard and powered conveyor belt, 500 mm wide. The system is in new condition, was put into operation in January 2026, and has only operated for approximately 75 days in a single-shift operation. Documentation is available. An on-site inspection is possible. Bedezvp Uyepfx Abtjll

Year of construction: 2015, condition: excellent (used), SEPRO SR SUCCESS 7 S3 TRANS Visual 2 (2014) Linear cartesian robot Euromap 67 VISUAL 2 Number of axis: 3 Reach: 1000 mm Payload: 3 kg X= 1000 mm Y= 400mm Blsdpfx Abozw Edtstel Z= 800 mm R1 = 0-90

Condition: good (used), Year of construction: 2016, functionality: fully functional, Currently, a machine overhaul is being carried out with a value of €90,000. Maho DMF 260 -7 / 5-axis machining center Year of manufacture 2016, Control system: Heidenhain ITNC 530, Blodpfxezxfz Ie Abtol Travel range X/Y/Z: 2600/700/700 mm, Fixed table with integrated NC rotary table, B-axis in the milling head, infinitely adjustable, Spindle speed up to 14,000 rpm, Tool holder: HSK A63, Coolant: 60 bar, Coolant pressure: 40 bar, Paper band filter, 3D measuring probe Heidenhain TS 649, 3D Quickset, Machine protection control, Electric handwheel, 3D data model.

Condition: ready for operation (used), Bauknecht ATB 18,5/2-75 Motor,used, strong signs of wear, 100% functional, scope of delivery according to photos ATTENTION: Pleasequire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Bledpjur A Tnsfx Abtsl

Year of construction: 2003, condition: excellent (used), functionality: fully functional, strip width: max. 1.500 mm strip thickness: 0,5 - 2 mm coil weight: max. 7 t Blsdpfxorazyqo Abtol mandrel Ø: 508 mm

Condition: like new (used), Year of construction: 2025, functionality: fully functional, overall weight: 750 kg, total width: 1,230 mm, total height: 2,315 mm, ABB ACS880 frequency converters – 210 kW – 2 units for sale We are selling 2 ABB ACS880 frequency converters, complete cabinet models for industrial applications. Bsdpozxc Irjfx Abtell Model: ABB ACS880-37-0210A-7 Type code: ACS880-37-0210A-7+B055+E205+H351+H353+V112 Technical data: Supply voltage: 525–690 V Rated power: 200 kW Heavy Duty (HD): 170 A / 160 kW Rated current: 210 A Maximum output current: 384 A Frequency: 50/60 Hz Enclosure class: IP54 Integrated harmonic drive/filter solution EMC/RFI filter, category C3 Safe Torque Off Dimensions (H × W × D): 2315 × 1230 × 710 mm Weight: approximately 750 kg/unit Price: 1 unit: 25,000 EUR excluding VAT Both: 45,000 EUR excluding VAT

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 3L3YF03390, power of the servo motor: 550 W, input voltage: 230 V, clearance between the columns: 262 mm, type of input current: AC, throat depth: 130 mm, pneumatic connection: 6 bar, This lot consists of six JUKI LH-series industrial twin-needle lockstitch sewing machines, removed directly from the professional production lines of the former MASI JEANS factory in Estonia. The JUKI LH-3100 Series is one of the world's most widely used industrial twin-needle sewing platforms, renowned for exceptional reliability, precise parallel stitching and outstanding productivity in demanding garment manufacturing environments. All machines were operated in the same professional production facility and maintained under the same factory maintenance program, making this an excellent opportunity to acquire a factory-matched production set with identical operating principles, common spare parts inventory and simplified maintenance. These machines are ideally suited for denim manufacturing, jeans assembly, workwear, uniforms, technical garments and other applications requiring strong, accurate parallel seams. Bundle Contents Machine 1 Model: JUKI LH-3188-7 Internal Reference: 3A-V256 Machine 2 Model: JUKI LH-3188-7 Year: 2004 Internal Reference: 7A-V257 Bljdpfxjznbtls Abtol Machine 3 Model: JUKI LH-3128-7 Year: 1998 Internal Reference: 37A-5470 Machine 4 Model: JUKI LH-3178-7 Year: 2008 Internal Reference: 32A-V459 Machine 5 Model: JUKI LH-3178-7 Year: 2002 Internal Reference: 28A-V249 Machine 6 Model: JUKI LH-3188-7 Internal Reference: 47A-K525 Technical Specifications Manufacturer: JUKI Corporation Model Series: LH-3128-7 / LH-3178-7 / LH-3188-7 Machine Type: Industrial Twin-Needle Lockstitch Sewing Machine Country of Manufacture: Japan Twin-Needle Lockstitch System Vertical Hook System Automatic Lubrication Integrated Electronic Control System (-7 Models) Automatic Thread Trimmer Automatic Backtacking Automatic Needle Positioning Industrial Sewing Tables Heavy-Duty Steel Stands Production Benefits • Factory-matched production set • High-speed twin-needle sewing • Excellent seam consistency • Accurate parallel stitch formation • Reliable performance during continuous production • Reduced operator training requirements • Common spare parts across the production cell Why Purchase This Lot • Six professional JUKI twin-needle sewing machines • Matching machines from one factory • Shared maintenance procedures • Common spare parts inventory • Cost-effective production line expansion • Ideal for new or expanding garment factories • Excellent investment for denim and workwear manufacturers Applications • Jeans production • Denim manufacturing • Double-row topstitching • Waistband sewing • Pocket attachment • Decorative topstitching • Workwear manufacturing • Uniform production • Technical garments • Industrial apparel manufacturing Condition Previously used in professional garment production. All machines remained in operation until the recent closure of the MASI JEANS factory. Good overall industrial condition with normal cosmetic wear consistent with factory use. Available for inspection before dismantling. Location Valga, Estonia Dismantling & Transport Buyer is responsible for dismantling, loading and transportation. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation. The machines are offered primarily as one complete factory-matched production set. Individual sales may be considered subject to the prior sale status of the complete lot.

Condition: defective spare-parts repository (used), Year of construction: 2015, functionality: not functional, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item by September 18, 2026! A forklift will be provided on-site for loading. The machine is defective and is intended as a source of spare parts. TECHNICAL DETAILS Printing technology: Inkjet Color system: 7 colors MACHINE DETAILS Bedjzx E Axjpfx Abtsll Electrical connection data Three-phase connection 1: 3/N/PE, 380–415 V, 50/60 Hz, 14 A SCCR three-phase connection 1: 1.5 kA Three-phase connection 2: 3/N/PE, 380–415 V, 50/60 Hz, 4 A SCCR three-phase connection 2: 1.5 kA Single-phase connection: 220–240 V, 50/60 Hz, 16 A SCCR single-phase connection: 35 kA EQUIPMENT Compliance: CE, KCC Safety approval: TÜV Rheinland – Type Approved Safety

Condition: used, Year of construction: 2023, Used System Year of Manufacture: 2023 Condition: Like new, very few operating hours Bledpfx Abozlbqrstsl Features and Technical Specifications: ECO JET DUO 6 XL ZRS stationary clean air filtration system for extracting wood dust and chips Fans: 2 x 7.5 kW Airflow: 10,000 m³/h Vacuum pressure: 2,700 Pa (total) / 2,200 Pa (static) 80 filters, each 2.50 m long, BIA Category M, electrically conductive, incl. support baskets Filter area: 77.6 m² Filter loading: 129 m³/(m² x h) Filter cleaning: AL-KO OPTI-JET® Pressure relief areas: 0.84 m² (rupture discs) Base structure with hopper and rotary valve; dry conveying with C-coupling ECO JET DUO 6 ZWR XL, 1,100 mm spacer ring for raising the unit, with 2 intake openings Base unit with feed hopper and ZRS 960/1 FG rotary valve for chip disposal via a customer-supplied transport fan into a silo or similar; transport line DN 200, approx. 1,260 mm, connection to be provided by the customer Rotary valve ZRS 960/1 FG: - ATEX Directive 94/9/EC; CE 0588 Ex II 1D/- (unit for indoor/outdoor use); EX D; FSA 11 ATEX 1614X - Motor: 0.18 kW / 0.78 A, 3-phase / 400 V / 50 Hz - Protection class/enclosure type: IP 54 / B3; Insulation class F - Speed: 41 rpm; Flow rate: 15,744 l/h*; 7 cells - Inlet/Outlet: 960 x 250 / 960 x 208 mm - Dimensions: 1,100 x 605 x 330 mm; Temperature range: up to 50 °C Additional features: - 400 mm suction inlet with check valve in rectangular duct - ECO JET backflow check valve 910 x 346 x 500 mm AL-KO Control System ACS II: - Touchscreen display, ST 1200 controller, Sitop Power power supply, 24 V control voltage, and integrated frequency converter for cascading up to 2 fans up to 37 kW with frequency converter transfer - Plain-text error messages on the display, as well as a collective error message and indicator light; manual start of discharge via display button and cleaning via button; cleaning start via differential pressure; Post-cleaning; external start via potential-free contact; operating hour counter; maintenance interval indicator; control cabinet lighting and ventilation; monitoring/evaluation of fire damper, residual dust sensor, fill level sensor, and maximum filter pressure - 10 individually controlled solenoid valves - Gate valve control in groups of 4 for up to 8 machines: control via potential-free contact (PFC) or induction coil; 24 V DC shut-off valves, motor-driven with single-wire control or electropneumatic; max. 4 plates per conveyor line - ZRS power module up to 0.18 kW; time parameters adjustable via touch display - Rupture disc sensor and evaluation unit; pressure transmitter for frequency converter; pressure cells; strobe light; 2 x PTC thermistor evaluations; rotation monitoring of the rotary valve - 24 V DC supply air/return air switching for summer/winter operation - Filter monitor/residual dust monitoring with evaluation unit in accordance with DIN EN 12779 and H3: If 0.3 mg/m³ is exceeded, a self-holding alarm is triggered and the recirculation damper switches to exhaust air - 10-terminal junction box, 24 V/230 V, fully wired for filter cleaning, including approx. 6 lfm of cable - Ducting system including elbows, branch pipes, reducers, PU hoses, machine connections, small parts, and EP dampers for exhaust from 11 woodworking machines 1 HRS as specified - Return air system in accordance with TRGS 553, with changeover damper and fire damper - Galvanized base frame for container l...

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, CNC machining center Hedelius T7 – 2600 1 R including standby magazine Control system: iTNC 640 Year of manufacture: 2017 Internal machine number: 68 Travel distances: X-axis vertical/horizontal 2,600 / 2,030 mm Y-axis 750 mm Z-axis vertical/horizontal 695 / 800 mm Swivel range: -98° to +98° Swivel operation: 760 / 1,300 mm Total clamping area 3,080 x 750 mm Table load: approx. 2,500 kg Integrated rotary table Ø 750 mm Interference circle diameter 1,100 mm Tool holder: SK 40 Tool magazine: 33-position Standby magazine: 180 pieces Celox motor spindle: 50 - 12,000 rpm Power: 29 kW Equipment: - KinematicsOpt TNC640 - Handheld control unit HR 510 - Compressed air nozzle on the spindle head - Internal compressed air supply - Inclined bed coolant system 900 l - Internal coolant supply (IKZ) 25 bar - Infrared receiver M & H Bjdpfx Aozwut Debtjll - 3D infrared measuring probe M & H 25.50 - Exhaust filter - Blow-off guns - Flushing guns

Condition: good (used), Year of construction: 2007, CNC Long Turning Lathe Manufacturer: Traub Machine Model: TNL 12 Control System: Traub Year of Manufacture: 2007 TECHNICAL DATA Headstock - Max. bar diameter (mm) 12.7 - Quality of round material (DIN 671) (mm) Ø Xh9 - Max. speed (rpm) 12,000 Max. turning length / headstock travel Bljdpezr Uvhsfx Abtel - with fixed guide bushing (mm) 130 - with rotating guide bushing (mm) 80 - with programmable guide bushing (mm) 80 C-axis resolution (degrees) 0.001 Rapid traverse Z1 (m/min) 30 Tool turret 1 - Slide travel X1 (mm) 35 - Slide travel Y1 (mm) 38 (-10 +28) - Rapid traverse X1 / Y1 (m/min) 15 - Chip-to-chip time (s) 0.3 Tool turret 2 - Slide travel X2 (mm) 35 - Slide travel Z2 (mm) 50 - Rapid traverse X2/Z2 (m/min) 15 - Chip-to-chip time (s) 0.3 Tool drive for tool turret 1 and 2 - Max. speed (rpm) 8,000 - Tools max. (number) 2xG - Clamping diameter for drilling tools (mm) 0.5-7 Counter spindle / front tool holder - Max. bar diameter (mm) 12.7 - Max. longitudinal travel 23, 24 / Xg (mm) 140 / 228 - Rapid traverse 23, 24 / X3 (m/min) 30 - Tool holders (number) 4 - Max. speed (rpm) 12,000 - C-axis resolution (GSP) (degrees) 0.001 Rear tool holder, driven / fixed - Z-axis travel with work spindle (mm) 80 - Tool holder diameter (mm) 20 - Tool holders (number) 3 Rear tool holder (X4 axis) - X4-axis travel (mm) 39 - Rapid traverse speed (m/min) 15 - Tool holder diameter (mm) 28 - Tool holders (number) 4 Tool drive for rear tool holder (with X4 axis) - Max. speed (rpm) 10,000 - Driven tools max. (number) 4 - Clamping diameter for drilling tools - Driven (mm) 0.5 - 7 - Non-driven (mm) 0.5 - 10 Coolant system - Pump pressure, single-stage (bar) 3 - Tank capacity (l) 180 - Delivery rate (l/min) 40 EQUIPMENT FEATURES - Chip conveyor - Bar loader FMB Minimag 18 - High-pressure system - Fire extinguishing system Subject to change and errors in technical data and specifications.

Condition: as good as new (ex-display), Year of construction: 2027, functionality: fully functional, This is a BOD Box on Demand exhibition machine in virtually new condition. It is the ideal solution for your highly flexible on-demand packaging project. The machine has a width suitable for continuous corrugated cardboard up to 2500 mm. Bjdpfeznw T Ijx Abtell It features a 2CL carton changer system and SbS for up to 2 carton stacks side by side. This allows up to 4 corrugated cardboard stacks to be loaded into the machine simultaneously. The machine can be inspected at any time. The machine is available for immediate delivery – while stocks last.

Condition: new, Year of construction: 2021, functionality: fully functional, overall weight: 1,126 kg, load capacity: 210 kg, arm reach: 2,701 mm, controller manufacturer: KUKA, controller model: KR C4, teach pendant manufacturer: KUKA, teach pendant model: KUKA smartPAD, warranty duration: 12 months, Equipment: documentation/manual, KUKA KR 210 R2700-2 with KR C4 – NEW / 0 operating hours We offer a new and unused KUKA KR 210 R2700-2 industrial robot with KUKA KR C4 controller. Manufactured in 10/2021 with 0 operating hours. Robot specifications Model: KUKA KR 210 R2700-2 Payload: 210 kg Reach: 2701 mm Year of manufacture: 10/2021 Operating hours: 0 h / NEW Weight: 1126 kg Colour: RAL 7016 Cable set: INT 084ST2700 Controller KUKA KR C4 EU KSS 8.6 Servo configuration SC4 400 V transformerless power supply Siemens SCALANCE X208 Interface X42 Ethernet interfaces X67.1–X67.3 24 V power interface X55 Blsdpfezyambex Abtol 27 V power / USB interfaces X51 / X56 CSP 2x USB 3.0 Cabinet base with spacer Set of 75 mm rollers Installed KUKA software & technology packages KUKA.SafeOperation 3.5 KUKA.UserTech 4.0 KUKA.LoadDataDetermination 7.1 KUKA.GripperSpotTech 5.0 KUKA.RobotSensorInterface 4.1 KUKA.DeviceConnector KUKA.WorkVisual 6.0 KUKA.ActivationManagementTool The robot is supplied with the complete configuration according to the attached technical specification. 12-month warranty included. CUSTOM CONFIGURATION AVAILABLE The robot can be supplied in its current configuration or customized according to the customer's application and technical requirements. Depending on the application, RSA Systems can provide configuration and installation of suitable KUKA software and technology packages, communication interfaces and fieldbus systems, as well as configuration for external axes and other application-specific requirements. Additional services available on request Installation & commissioning | Programming & optimization | Integration & automation | Custom robot configuration | Technical support | ISO 9283 metrology & calibration | KUKA robot training Inspection and functional demonstration of the robot at our facility is possible by appointment. Send us your application and technical requirements and we can prepare the robot configuration according to your project. RSA Systems s.r.o. Experience. Reliability. No Compromise.

Condition: excellent (used), Year of construction: 2015, Weinig Powermat 2400 moulder with 7 Spindles. (Year 2015) Working height: 10 - 160 mm . Working width: 20 - 230 mm. 50mm spindles 6,000 RPM (Not Powerlock) Bottom 15 kW + outboard bearing Right 11 kW + Straight jointer Left 11 kW + Straight jointer Top 15 kW + Straight jointer + outboard bearing Bottom 18.5 kW + Profile jointer Top 18.5 kW + Straight + Profile jointer Bottom 18.5 kW Straight jointer + outboard bearing 11kW feed motor, 60m/min. Heavy duty feed works. 10x top feed rollers. First top feed roller with clutch installed for use with mechanisation. 5x bottom feed rollers. Automatic lubrication system. Electric digital display memory system. CNC POSITIONING ON SPINDLES 3, 5 & 8 Bjdpfezv S Atex Abtjll Possible to supply with Weinig moulder infeed and outfeed

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) Bljdouxfu Nopfx Abtjl -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Condition: excellent (used), Planetary mixer Herbst HRV-S 2-7 Bodpfx Abjvlwdljtjll Power 1.5 kW Speed adjustable via frequency converter with control cabinet Wall scraper Vacuum pump mounted on stainless steel plate Very good condition, straight from production!!!

Condition: excellent (used), Year of construction: 2008, I sell the press for glulam glued massive wood LISY DVORAK TH6, year 2008. Material size 3000 X 1250 x 50mm 6 working areas, manual rotation. 6 pcs hydraulic cross pressures per 1 area / pomp 1,1 KW 6 pcs manual pressures per 1 area Blsdpfx Askd Drhsbtel Self weight 1200kg. Very good condition. Available immediately.

Condition: excellent (used), Year of construction: 2014, operating hours: 47,137 h, functionality: fully functional, machine/vehicle number: 61020607, clamping force: 1,300 kN, clearance between the columns: 470 mm, Here we, as dealers in injection moulding machines, offer the following well-maintained used injection moulding machine for sale. Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Important current notice – Tax information and benefit for used machines: From 01.07.2025, used machines will also be eligible for a special tax depreciation of 30% per year. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as for a new machine. Keyword: Growth booster (§ 7 paragraph 2 EStG-E). Bsdsyf Uy Ujpfx Abtsll Manufacturer: Krauss Maffei Model: KM 130 750-130 CXV BluePower 2-color 2-component machine Control system: MC6 Year: 2014 Machine no.: 61020507 Operating hours: 47,137 h Complete maintenance records for the last 7 years / 25,000 operating hours 1st injection unit 750 horizontal Screw diameter: 50 mm Injection volume: 393 ccm Shot weight: 357 g Heating capacity: kW Heating zones: 5 Nozzle stroke: mm Injection pressure: 1,892 bar 2nd injection unit 180 vertical Screw diameter: 30 mm Injection volume: 85 ccm Shot weight: 77 g Injection pressure: 2,500 bar Clamping unit Clamping force: 130 t / 1,300 kN Opening stroke: 600 mm Tie bar spacing: 470 x 470 mm Plate size: 745 x 770 mm Max. daylight: 900 mm Min. mould installation height: 300 mm Ejector stroke: 150 mm / ejector force: 23 kN Dimensions: 4.39 x 1.61 x 4.01 m Weight: 9,000 kg Extras – complete machine data sheet attached as PDF document Nozzle side: Needle shut-off A+C 1 x hydraulic core pull 1 x pneumatic core pull 1 x air blast Ejector side: 1 x hydraulic core pull 3 x pneumatic core pulls 1 x air blast Water BGS: 6 circuits each on nozzle and ejector side BluePower technology: up to 40% energy savings The machine is in excellent condition and can be inspected under power. Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Free loaded onto buyer’s truck or delivered free to destination against reimbursement of freight costs. For information about the machines we offer and our company: - We only sell our own machines, purchased from ongoing production, from our warehouse in Hanover - All machines offered are inspected and tested prior to dismantling - We do NOT sell insolvency assets – we are NOT intermediaries trading in third-party property - All machines offered come from successful companies for whom regular maintenance is a given - All offered machines are available for viewing at our warehouse

Condition: ready for operation (used), Year of construction: 2007, load capacity: 200 kg, arm reach: 2,700 mm, controller manufacturer: KUKA, controller model: KRC2 ED05, Compact, extremely fast and with a unique combination of payload and reach: these attributes make KUKA comp series robots are the obvious choice for a wide range of applications – e.g. handling or spot welding. Model: KR200-2 COMP Payload: 200 kg Reach in mm : 2700 mm Bsdpfxszl Si Sj Abtjll Condition: Used & Tested Year: 2007 (Multiple options available) Included: Manipulator + KRC2 ed05 Cabinet + Teachpendant + All Wire Sets PLC MERKEZI Refurbishment Services Include with additional cost: • Cleaning: The surface of the robot panel and the robot has been cleaned. • Oil Changing: The oils of all axes (6 axes) of the robot have been replaced. • Battery Changing: All batteries have been replaced with the new ones. • Mechanical Maintenance: Gear wheels counter balance are checked and maintained after weight, repeatability tests. • Electronical Maintenance: Includes drivers, electronic boards, teach pendant and PC maintenance. • Polishing and Repainting: After the cleaning the robot gets polished and be painted to its original colour, can be painted to the colour that you desired. Shipment expenses are not included in the price Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands.We also offer custom engineering services and design for your specific production needs. (Source: Kuka's Website)

Condition: used, maximum load weight: 4,960 kg, overall weight: 10,500 kg, first registration: 04/1993, next inspection (TÜV): 01/2026, loading space length: 6,260 mm, loading space width: 2,430 mm, loading space height: 2,430 mm, loading space volume: 37 m³, Equipment: ABS, tail-lift, 2-axle tandem refrigerated trailer 7 m with 1-ton tail lift. * THERMOKING LND-II MAX (diesel engine) and standby cooling 380 V ELECTRIC * Vehicle number for customer inquiries: 4593 * Tail lift * Air suspension * EBS * Anti-lock braking system (ABS) No liability for typographical or printing errors. Sales to business customers only. Subject to prior sale and errors. Changes, interim sale, and mistakes expressly reserved. The description is provided for vehicle identification purposes and does not constitute a warranty in the legal sense. The purchase contract description is binding. * TOP SERVICE + QUALITY * We are happy to provide you with a LEASING-FINANCING-HIRE PURCHASE offer Warranty insurance available on request from the insurer * TÜV / UVV LBW / Tachograph inspection and installation of OBU device by our local partners * Customs plates valid for 30 days All export customs documentation possible, but must be requested separately * Toll for Toll-Collect can be arranged in-house * Free transfer from Stuttgart Airport or Metzingen (Württ) train station * TRAIN STATION FOR ARRIVAL: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas Blsdpoykxflefx Abtsl WHATSAPP Number * * ---- Visit our website at * Always over 200 vehicles in stock