Used Bayer Diagnostics Tissue-Tek 4715 Embedding Console With Cryo Console for sale (2,477)

Condition: used, This listing is for a Tissue-Tek 4715 Embedding Console with Cryo Console Ibedpfx Aexzhdkochea

Condition: used, This listing is for a Tissue-Tek TEC 4715 Embedding centre with Cryo console Coldplate Ibodpfx Aoxzhg Eschoa

Condition: used, This listing is for a Sakura Tissue-Tek Auto Write Cassette Printer Ibjdpfxsxzgx Hs Achea Sakura Tissue-Tek AutoWrite cassette printer delivering fast, precise labeling for histology and pathology laboratory workflows

Condition: used, This listing is for a Sakura Tissue-Tek Tec 5 CM E-2 Cold Plate Ibsdexzgzbjpfx Achoa The Sakura Tissue-Tek TEC 5 CM E-2 Cold Plate is the cryogenic cooling component (cold plate) of the broader Sakura Tissue-Tek TEC 5 tissue embedding system — a key part of histology workflows in pathology and research labs. It’s designed to rapidly cool and solidify paraffin-embedded tissue blocks during processing Typical Use Case This cold plate is used by histology technicians and pathologists to cool paraffin blocks immediately after embedding so that they are firm and stable enough for trimming and sectioning on microtomes — a critical step toward producing high-quality histological slides for diagnosis or research.

Condition: excellent (used), Year of construction: 2017, VUTEK H100 3.2m Fast LED Hybrid printer Speed exceeding 450 m²/h Color 6C (white disabled) Roll option 3.2m 2 tables under efi full service new belt installed on 04-26 via efi Recently, 4 new printheads were replaced (defective solder joints on the nozzles). Ibodjza U Sajpfx Achoa

Condition: used, Year of construction: 1970, Additional title: Vertical tank Ibodpfx Ajztzdbochsa Capacity: 5244 l Max. allowable operating pressure: 5 bar Operating temperature: 20 °C Width: approx. 1600 mm Height: approx. 3200 mm Material: Stainless steel 1.4541 Position: vertical Base construction: 3 x feet Features: Manway; safety valve; CIP piping

Condition: good (used), functionality: fully functional, Year of construction: 2007, laser hours: 27,000 h, including Sheetmaster, Gripmaster, and Toolmaster Year of manufacture: 2007 Ibsdpfx Aezr Ha Eechoa

Condition: used, 35m3 heated tank with a connical bottom. The tank was used to store wine. The tanks have been lenghtened from 26m3 to 35m3. 3 units available. Ibsdpfx Acsun Nvbohea

Condition: used, Diameter: 3.60 m Height: 10.5 m Flat-bottomed Ibedpjw I R T Nsfx Achoa Equipped with a hatch on the side wall and top The tanks were used in the chemical industry Four units available.

Condition: not inspected (used), Type: DO 25 - 0.55 kW Iedpfx Acjza Dk Eshoba - 2,800 rpm - 220/380 V

Condition: excellent (used), Year of construction: 2017, Working width: 3 meters Pressing force: 130 tons Ibjdpfszq A Ipjx Achea

Condition: new, Year of construction: 2026, PROFESSIONAL WIRE FEEDER WITH AC SERVO MOTOR FOR LASER AND TIG WELDING Citronix professional wire feeder with servo technology - means that it uses ac servo motor for motor drive, which enables it not only to feed wire very precisely even when the speed is low, but also the ability to set the length in „mm“ for wire withdrawal, and also, after the material is cooled down, we can push it again (the smallest step 0,1 mm) This is a very important feat with laser welding, and this working method is an advantage compared to wire feeders made in the Far East, since with those machines the function of withdrawal and pushing the wire is set on time, and the consequence of this method is that the tip of the welding wire never comes back to the place where the withdrawal started. We made the Citronix wire feeder in a way that it can control not only the wire feeding process, but it can also manage (turn on and off) both the laser source and the gas magnetic valve. This is another significant difference and advantage compared to other manufacturers, because usually there is no spot welding technology in laser welding machines, so if someone wants to weld sheets in the spot welding technology, he can set the spot time and the wire feeder will control the laser source. Ibedpfx Acjmk S Slohoa Wire feeder has 4 operation technologies: 1. continuous welding with wire feeding; 2. continuous welding without wire feeding; 3. spot welding without wire feeding; Wire feeder has 200 memory cells – locations, if the parameters are set, they can be saved on the memory location and we can name them in any number or text combination, in order to make use easier. We also developed a foot pedal, which can be attached to the wire feeder and regulate the feeding speed. It works like a gas pedal in motor vehicles. If, for example, we set the maximal speed 10 meter per minute on the display, and press the pedal all the way, the speed will be 10 meter per minute (or the speed we set), if pressed only half way, the speed will be half of the set speed. This feat can be used if the operator remains in one place, for example if he is sitting. If this pedal isn't necessary, the wire feeder can be attached to the system in a manner to turn on-off the welding process from the button on the torch. This pedal is optional, and in case you want to order it, it is additionally charged 400 EUR. Take a look at the monitor images and see the functions – parameters that can be adjusted. Citronix wire feeder can be used not only for laser welding, but also for the TIG welding, we made a filter to prevent HF-spark. Wire thickness it can push is from 0,8-2,4 mm. At this moment, we have a menu in English, German, Hungarian, and Serbian language. In our offer we have a lot of welding machines we developed ourselves and they are all digitally and software based MIG MAG, MIG PULS SYNERGIC welding machines, also for robot welding with touch screen monitor, TIG ac dc with touch screen monitor, digital plasma cutting machines, electronics for controling the high pressure water jet pump, sand dispenser for water jet cutting, voltage THC with touch screen monitor... We are also very involved in innovation and development, please take a look at our other products, if you are a manufacturer, and are interested in discussing further, we are also selling know-how.

Condition: used, Buchdruck Schrank - Letters Cabinet BayerFor Leter Press Heidelberg OHT - Cylinder Ibsdpeiwu Ezsfx Achea Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: new, Year of construction: 2026, Metal roof snap lock machine SLP-1 auto with side punching option is the latest project of our company in the direction of equipment for metal roofing production. Snap lock machine SLP-1 auto can produce click-seam panels with fixation holes and punch off side parts of the panels, it makes possible to bend the edge of the panel and join it to the roof elements after. Our machine is equipped with an automation system and make production in a fully automatic mode. This process comes following way: operator of machine put end of metal roll to the pulling rollers of the machine, which moves it to the rolling part of the equipment. At the beginning of the rolling process, two pneumatic punching presses from each side of machine make side cuts of panels. After cutting, the rolling process goes to the next rolling rollers. They gradually form the roofing panel profile and cut out fixation holes with special cutting tool rollers. After rolling, special automatic shear at the end of machine cut off the panel into length with necessary sizes. As machine cuts side parts of panels at the beginning of production process, so it cuts only flat part of panel in the end of production. It makes panel quality better and there are no any deformations as with a profile cutting happens, when guillotine shear has to cut not only flat part but also the lock part of panel. Specifications: Dimensions (mm): rolling machine 3000x1400x900 guillotine shears 400x1120x1130 Weight (kg): rolling machine 643 guillotine shears: 110 Drive power: rolling machine: 1.5 kW, 220V (or 380V on request) Ijdsuzv Tzjpfx Achsba guillotine shears: 1.1kW Maximum thickness of sheet metal (mm): 0.6-0.7mm Workpiece Width (mm): 250-700 Rolling speed (m/min): up to 10 Metal roof panel machine SLP-1 auto has an automation system so help to make minimum part of operator works - he just sets necessary number of panels and their length on the computer to produce, and the machine automatically rolls and cuts them. Therefore reducing the influence of the human factor, manufacturing errors are minimum and panels are all the same sizes and ready for further installation. SLP-1 auto click lock roll forming machine has easy width adjustment system, so to change machine from one panel width to another, the operator just needs to turn the adjustment wheel, so the readjustment takes a very short time for such operation. As additional options metal roof panel roll forming machine SLP-1 auto can have: Cutting knife to cut metal from coil at the end of the metal rolling process to reduce the amount of possible waste material; Ribbed panel rolls, to roll narrow or wide ribs in the center of the roofing snap lock panel; Microwave panel module- device to form small bends along the entire width of the roofing panel, making the appearance of the roof more interesting and eye-catching. Metal unwinder (can be floor-standing, manual console, automatic console).

Condition: used, Log table with elevator and log scanner Rema Control - logs up to 6 m - between rails 1100/1050/ 1050/1250 mm Ibsdsu Smq Sspfx Achoa - log table length: 10 m - Rema Scanner - log infeed conveyor

Condition: good (used), Facom Jet Tool Cart with 8 Drawers Perfect condition, Facom tools. Made in France. Ibjdpsyzt Nzefx Achea Accessories as shown in the photos. Price is for the entire unit.

Year of construction: 1998, condition: excellent (used), Max. roll diameter, unwinder: 750 mm (Shaft 76) Max. roll diameter, rewinder: 320 mm Max. web width: 270 mm Description: Unwinder, splicing table, 2x web guiding system, cutting unit, rewinder, counters (meters), Nikka camera Camera Manufacturer: Nikka Research Deutschland GmbH Type: ALIS C2 Date: 2005 Description: Since May 13, 2026, the camera has only been working intermittently (outdated hardware). Although it could be repaired, the chances of success are low; the manufacturer recommends installing a new camera system. Accessories: 1x Shaft rewinder 76 mm 1x Shaft rewinder 40 mm 1x Shaft rewinder 50 mm 1x Shaft rewinder 100 mm 10x Razor blades Isdpfjzn Ayyjx Acheba

Condition: good (used), Year of construction: 1982, Grinding machine, angle grinder, rotary steel grinder, thread drill grinder, milling cutter grinder, surface grinder, drill grinder, bench grinder, double bench grinder -Manufacturer: Gebr. Bayer, tool grinding machine with 2 stations -Motor power: 0.75 kW Iedpfxonymgdj Achoba -Speed: 2800 rpm -Grinding discs: Ø max. 225/160 mm -Coolant device: -Dimensions: 1210/710/H1340 mm -Weight: 195 kg

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm Ijdoxdmgvjpfx Achoba CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: excellent (used), Year of construction: 2009, Beam on time: approx. 17,600 hours Isdpszcvx Tsfx Achjba Laser on time: approx. 45,500 hours Includes Loadmaster.

Condition: excellent (used), Extremely rare machine, possibly the only one for sale in the world today. Gas flush whole bins or dolavs of product. The CV-Tek® CVP Systems A-200 Overhead model line brings the advantages of Modified Atmosphere Packaging to large and bulk items. Full pallets and dolav bins can now be processed efficiently. Being suspended from either the ceiling or wall allows excellent logistics for moving bins and pallets during processing. Ibodpfxsi E Tt Ho Achoa Wrinkle free seals are achieved with seal bars of 100 inches (2540mm) and automatic bag stretchers. Floating head prevents bag pullout.

Condition: used, tank capacity: 1,000 l, wall material: stainless steel, pressure (max.): 6 bar, overpressure (max.): 9 bar, Cryogenic vacuum containers for storing liquid nitrogen, oxygen, or argon. Ijdpezb Afwjfx Acheba Two units available: 1 unit manufactured in 2009, price: €6,800; 1 unit manufactured in 2003, price: €5,500. Manufacturer: CRYO Anlagenbau, Wilnsdorf, Germany. No further documentation available.

Year of construction: 2023, condition: like new (used), functionality: fully functional, machine/vehicle number: 018-2310-0001, Sono TEK ultrasonic spray coating system with conveyor belt or workpiece carriage - 6-head spray system - Was set up for anti-fingerprint / hydrophobic spray coating for display glass, but has seen little use as product launch was postponed - Conveyor approx. 2 m - Flexible gantry design, allowing spray width to be easily and precisely adjusted - Siemens Simatic touch panel - Commissioning / installation support can be provided - Documentation available Ibedpfxeyl Rr Hs Achoa System is dismantled and ready for transport.

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: A243/03/04, section length (min.): 6,750 mm, input voltage: 380 V, “Price reduced for quick sale – no storage space available.” Ibedjv H Adgepfx Achsa Tek-ind ALFA PLUS 10/22 AUTOMATIC SCREEN PRINTING CARUSEL, a high capacity press build for efficiency and precision. This machine offers 10 color printing with 22 stations, making it an ideal choice for business with high production demands. Print size 60cm x 80cm. She comes with 2 sets of tables (61x125cm and 80x125cm) including 4 flash

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, Operating hours: approx. 22,800 h Laser on: approx. 40,100 h Voltage: 400 V Frequency: 50 Hz Ibjdpoyyygkjfx Achja Power: 3,200 W