Used Behr St 150 for sale (23,898)

Condition: ready for operation (used), functionality: fully functional, BEHR ST 150 / Vertical slotting machine with swiveling head - Stroke up to max. 175 mm - Head tilting in both directions, 5-8 degrees each - Table height / lower edge of ram guide: 260 mm - Rotary table diameter: 340 mm - Table longitudinal travel: 320 mm - 3 stroke speeds: 17-54-108 strokes per minute - Maximum slot width up to 26 mm - Feed in X/Y axes, speed adjustable - Rotary table adjustment manual - Three-jaw chuck Dimensions (LxWxH): 1.5x1.2x2 meters / Weight: 1600 kg Errors and omissions excepted. Bsdpfx Aoy R S Rvjbtell

Condition: like new (used), Staff Ice System BTX150 Ice Cube Machine / Ice Maker 150 kg/24h Year 2022 Technical Specifications Gelato BTX150 A Staff Ice System ice machine for the production and storage of ice cream. Designed for manufacturing and storing ice cream. Automatic extraction. Stirrer with durable polyethylene blades. The double lid allows ingredients to be added during the process. Vertical tank for complete control of the production process. 50 customizable operating programs. Technical features: Maximum ice cream production per cycle: 2 liters. Ice cream production: 15 l/h. Dimensions: 43.5 x 59.2 x 59.5 cm. Blodpjyzc Rujfx Abtsl

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 150 302, total height: 4,600 mm, ram adjustment: 150 mm, installation height: 550 mm, table height: 1,000 mm, total width: 3,000 mm, total length: 4,200 mm, drop-through hole in table: 1,400 mm, table length: 3,000 mm, table width: 1,250 mm, pressing force: 250 t, control cabinet height: 2,000 mm, control cabinet length: 6,800 mm, control cabinet width: 600 mm, type of input current: three-phase, stroke length: 180 mm, stroke adjustment: 20 mm, input voltage: 400 V, distance between side stands: 810 mm, distance between stands: 2,020 mm, overall weight: 45,000 kg, control voltage: 24 V, year of last overhaul: 2026, input frequency: 50 Hz, ATTENTION: The machine will be completely cleaned before delivery. Fairings will be repaired if possible and deemed appropriate. Bledpfx Abozrwypstel Pressing force: 2500 kN Adjustable stroke: 40 - 180 mm Ram adjustment: 150 mm Stroke rate: 20 - 150/min Installation height for tool: 550 mm Table dimensions: 2000 x 1250 mm Ram dimensions: 2000 x 1000 mm New control system: SIEMENS S7 300, 1st generation, control system designed according to VW specifications. Upon request, the machine can also be completely overhauled by ANDRITZ Kaiser, with a new S7 1500 control system.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 150 350, total height: 4,600 mm, ram adjustment: 150 mm, installation height: 550 mm, table height: 1,000 mm, total width: 3,000 mm, total length: 4,200 mm, drop-through hole in table: 1,400 mm, table length: 3,000 mm, table width: 1,250 mm, pressing force: 250 t, control cabinet height: 2,000 mm, control cabinet length: 6,800 mm, control cabinet width: 600 mm, type of input current: three-phase, stroke length: 180 mm, stroke adjustment: 20 mm, input voltage: 400 V, distance between side stands: 810 mm, distance between stands: 2,020 mm, overall weight: 45,000 kg, control voltage: 24 V, year of last overhaul: 2026, input frequency: 50 Hz, ATTENTION: The machine will be completely cleaned before delivery. Fairings will be repaired if possible and deemed appropriate. Pressing force: 2500 kN Adjustable stroke: 40 - 180 mm Ram adjustment: 150 mm Stroke rate: 20 - 150/min Bjdpezrwzaofx Abtell Installation height for tool: 550 mm Table dimensions: 2000 x 1250 mm Ram dimensions: 2000 x 1000 mm New control system: SIEMENS S7 300, 1st generation, control system designed according to VW specifications. Upon request, the machine can also be completely overhauled by ANDRITZ Kaiser, with a new S7 1500 control system.

Condition: excellent (used), For sale: a professional, two-spindle eyeletting/riveting machine, Constantin Hang Typ 150 3P, manufactured in Germany in 1983. This machine is designed for the simultaneous installation of two eyelets or rivets, significantly increasing work efficiency. The machine is used in bookbinding facilities, printing companies, and factories producing binders, folders, calendars, tags, and other paper products. It is equipped with two working units, an adjustable table, and precise guides that allow for accurate material positioning. Technical specifications: Manufacturer: Constantin Hang Maschinenfabrik Model: Typ 150 3P Year of manufacture: 1983 Serial number: 35805 Country of manufacture: Germany Type: two-spindle eyeletting/riveting machine Two working heads Adjustable work table Guides and material position adjustment Robust industrial construction Electric drive Condition: used Blsdpfeziwnnex Abtol Applications: eyelet installation, riveting, binder production, folder production, calendars, promotional tags, cardboard packaging, bookbinding and printing. The machine is sold in the condition shown in the photos.

Condition: good (used), Year of construction: 2005, Ref. no.: 18565 Manufacturer: DEMAG Type: 150-610. System NC4 Year of construction: 2005 Clamping unit Clamping force: 150 ton Bodpfx Aoxhfuasbtoll Opening stroke: 500 mm Distance between tie bars: 500 x 500 mm Mould height min.: 250 mm Opening width: 750 mm Platen size (h x v): 750 x 750 mm Injection unit Screw diameter: 45 mm Injection volume: 323 cm³ Shot weight: 290 g Injection pressure: 1973 bar Measurements and weight Dimensions: 5.45 x 1.63 x 2.1 m Machine weight: 7500 kg Robot Producer: Wittmann Type: W721-0231 Year: 2005 Further information: The Demag Ergotech System series hydraulic injection moulding machine is a suitable plastic injection moulding machine for technical plastic parts and automated serial production applications. Thanks to its hydraulic operating principle, the machine offers powerful and stable injection performance, while the Demag NC4 control system ensures precise process control. The machine is equipped with a Demag (Wittmann) DR721 linear robot. Robot specifications: Year of manufacture: 2005 X-axis: 550 mm Y-axis: 1000 mm Z-axis: 2000 mm The robot system enables fully automatic part removal, conveyor transfer, and automated serial production processes. In addition, the machine comes with 2 complete spare plasticizing units / injection units (screw and barrel assemblies). The machine was in running production and operating without problems until dismantling.

Condition: refurbished (used), Year of construction: 2016, Stainless Slitter 1500x3, made SAMO OCEMI Completely revamped in the year 2016. Technical specifications Thickness minimum: 0,4mm Thickness maximum: Up to 4mm with Rm 400N/mm2 | Up tp 3mm with 700 N/mm2 Coil width: max 1.540 mm. Max coil weight: 16 t Direction: left to right Speed: up to 150 m/min. Scope of supply · Coil car, hydraulic, Over floor · Decoiler, hydraulic expansion, with DC motor 28 kW-717-2.200 rpm, for dynamic brake and energy recovery. Stationary disk brake. Motorized snubber roll. Paper rewinder. Alignment. · Coil opener with telescopic table. · Feeding unit with pinch-roll and 3-rolls straightener. · Centering unit (motorized) with 3 flattening rolls (poliurethane). · PVC film applicator (new 2017) · Slitting head, shaft diam.: 200 mm. DC motor 72 kW 780-2.652 rpm + stationary brake. · Turnstile knife charger – 2 arms couples. · Tension pinch-roll DC motor 23 kW 1.960 rpm + stationary brake. Scrap table, movable, with scrap conveyor. · Scrap rewinder, single drum dimension 600x600. Ac motor 15 kW with inverter. · Bypass table (loop) · Braking car (movable) with: - double separating roll - Deburring pinch-roll (new in 2017) - Felt press - Braking rolls-with DC motor 33kw-2.550 rpm for strip tension adjustment and energy recovery. - Cross cutting shear (crop shear) - Deflector roll - Recoiler, hydraulic expansion, separating arm with automatic lifting system. DC motor 114 kW 800-2.400 rpm + stationary brake. · Discharging coil car, over floor, with press arm. · Turnstile arm 4 x 20 t, motorized · Electric EQUIPMENT (NEW in year 2016). Supply voltage 3x380V Consisting of: Bedpfx Aoymcmfebtell Cabinet Dimension mm 5.600 x 600. With PLC Siemens S7-300. N. 3 operator switchboards. The main switchboard with HMI touch-screen Siemens Touch · Hydraulic equipment. Hydraulic power pack with oil-air cooling. Manifolds with electric valves on each machine, 24 V DC · Complete safety fences, mechanical/optical. · Cutting tools (knifes approx. 160 pieces, spacers, separating discs..). Documentation Foundation drawings Electric drawings. Hydraulic plan. PLC and HMI Software. CE declaration of Conformity Thickness minimum: 0,4 mm Thickness maximum: Up to 4 mm with Rm 400N/mm2 | Up tp 3 mm with 700 N/mm2 Coil width: max 1.540 mm Max coil weight: 16 t Speed: up to 150 m/min Direction: left to right

Year of construction: 2012, condition: used, functionality: fully functional, The temperature control unit from Plasma, model "Primus", is available for sale with the following technical specifications: Medium: water, Maximum temperature: 150°C, Heating capacity: 9 kW, Cooling capacity: 30 kW, Special equipment: reinforced pump K6 at 60 l/min up to max. 6 bar. The pressure booster pump is used to increase the cooling water pressure during filling; this is necessary if the system pressure is higher than the cooling water pressure. PT 100 sensor. Interface: On/Off, Alarm, PT 100, Temperature monitoring. Bjdpfx Asx Eg T Esbtjll

Condition: used, Year of construction: 1984, Consists of a cooking cabinet and smoking unit, including documentation. On-site inspection is possible. Bedpfx Abozvgh Dotjll

Condition: used, Year of construction: 2013, mobile turning device with hydraulic height and lateral displacement load capacity 8 x 150 tons component diameter 5,000 up to 12,000 mm several turning devices must be installed to weld the segments total load capacity 1,200 tons maximum steel support rollers *support rollers can be adjusted in three axes under load* - moving - roller axis:  + / - 50 mm - stroke - height adjustment: 0 bis 150 mm - thrust travel - cross adjustment: + / - 50 mm Bsdpfx Ajt Run Iobtoll two height-adjustable drive units - type TR15 - M - year of construction 2010 load capacity 15,000 kg per roller roller diameter 559 mm - roller width 300 mm drive torque 2 x ca. M = 3,500 Nm connected load 3 KW per drive unit manual hydraulic roller feed rotational speed stepless 100 up to 2,000 mm/min by handheld remote control second drive unit can be operated by radio remote controle The entire system is designed for transportation in nine 20ft containers for worldwide use. total weight of the plant approx. 130 to

Condition: like new (used), Year of construction: 2020, functionality: fully functional, type of input current: three-phase, Zhejiang Baina 150 20D 1000Kg/h extruder The extruder is almost new and is available immediately with a few operating hours. Manufacturer: Zhejiang Baina Type: E150-01-00 Year of manufacture: 2020 External dimensions (L × W × H): 4200 × 1600 × 1500 mm Side rollers; the driving force is provided by the screw, with active dosing Coordinated operation of the feed roller gear drive and the screw drive, with automatic lubrication system Screw material: 38GrMoAcA Screw hardness: HRC 65–68 Steel bushing hardness: HRC 65–70 Nitriding depth: 0.4–0.7 mm Screw design: Design with suction groove for vacuum suction Pressure control, pressure protection value adjustable between 0–35 MPa; with temperature sensor. Screw diameter: 150 mm Screw speed: 1–50 rpm Maximum output: Approx. 1000 kg/h Number of heating stages / output: 7 × 6 kW Cooling stage: 1 stage (side rollers) Vacuum pump output: 2.2 kW Temperature control Automatic heating and cooling control with electromagnetic valve Circulation pump: Weile Cooling water pressure: 0.15–2 kg/cm² Temperature control accuracy: ±1 °C Screw and gear connection: Involute gear connection Motor and reducer drive: Belt drive Bsdpoy Ez Ersfx Abtoll Hardened gear type: ZLYJ420-28-I (involute gear reducer) Motor power: 160 kW Total installed power: 204 kW Speed ​​control: Frequency converter control

Condition: excellent (used), Year of construction: 2006, load capacity: 130 kg, arm reach: 2,900 mm, controller manufacturer: KUKA, controller model: KRC2, This system is equipped with a KUKA KRC2 control unit and features the KR 150 L130-2 2000 robot model. The robot offers a payload capacity of 130 kg and a reach of 2900 mm. It is suitable for high-precision applications. Main application areas: Spot and arc welding Heavy-duty material handling Palletizing CNC machine tending Press automation The robot is designed for reliable operation in demanding industrial environments. Blodsw Idw Ijpfx Abtol Model: KR 210 L150-2 2000 KRC2 ed05 Payload: 130kg Arm Reach: 2900 mm Condition: Used & Tested Year: 2006 Controller Cabinet: KRC2 ed05 Included: Manipulator + KRC2 ed05 Control Cabinet + All Wire Sets + Teach Pendant As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and designs for your specific production needs. ( Source : Kuka's Website )

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 1002570003, total height: 3,450 mm, ram adjustment: 80 mm, installation height: 270 mm, table height: 1,280 mm, total width: 1,700 mm, total length: 3,065 mm, drop-through hole in table: 210 mm, table length: 1,500 mm, table width: 750 mm, pressing force: 63 t, control cabinet height: 2,200 mm, control cabinet length: 1,800 mm, control cabinet width: 600 mm, stroke adjustment: 80 mm, clearance between the columns: 1,540 mm, working width: 1,500 mm, distance between side stands: 360 mm, distance between stands: 2,020 mm, overall weight: 17,000 kg, punching force: 63 t, RASTER punching system RST 630-1500 DH with soundproof enclosure and tool monitoring. The machine is in good condition. Stroke rate: 30 - 700 1/min. Operated in single-shift operation. The machine can be inspected under power. Price on request. Blsdeyyppbspfx Abtel

Condition: excellent (used), Year of construction: 2017, Vacuum lifting device, vacuum lifter from Schmalz for heavy plates with new suction cup rubber. Lifting capacity: 150 kg horizontally and vertically. Suction cup can be pivoted 90 degrees by motor. Suction box: 1000 x 675 mm. Audible warning signal for too low vacuum. Bedsv S Synopfx Abtjll 400 V, 1.5 kW. Can be attached to an existing chain hoist. CE marking. No inspection book available. Suction cup rubber replaced. As new condition. The machine can be demonstrated on-site by appointment. We only offer machines that are readily available for demonstration in our warehouse; see "other offers from this supplier."

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, turning length: 1,585 mm, spindle motor power: 22,000 W, spindle speed (max.): 5,000 rpm, spindle bore: 76 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 1,585 mm, travel distance Z-axis: 230 mm, rotational speed (max.): 5,000 rpm, total height: 3,100 mm, total length: 6,100 mm, total width: 3,230 mm, overall weight: 16,600 kg, Multi-tasking lathe MAZAK - Integrex i-200ST x 1500U MACH-ID 9804 Make: MAZAK Type: Integrex i-200ST x 1500U Control: SmoothX Year: 2016 5 Axis Simuteneous EIA/ISO Milling spindel with Threading Function Extra M-Code (1 pair for 2-M-Code) Preparation RMP-60 Sub spindel with C Axis any C1 + C2 Synchronisation Lower revolver with Live tools 6000 Rpm IKZ with 70 Bar main spindel IKZ with 15 Bar on lower Revolver Knoll Filtration KF-400/2300 SMW KNCS-N-325-104 3 chuck Bljdpezx Sh Iofx Abtol Robotunits C4N Belt conveyor / Part catcher with side conveyor belt CAPTO SANDVIK Tooling package with 36 tools (ca 16 included Turn & Mill) Max. turning Ø: 658mm X-Axis: 260mm Y-Axis: 1585mm Z-Axis: 230mm B Axis: 360° Spindle bore: 76mm Speedrange: 5000Rpm Spindle power: 22kW Subspindle speeds: 5000Rpm Subspindle bore: 65mm Subspindle power: 22kW ATC / revolver: 36 Speed live tools: 12000Rpm B-Axis Toolsystem: HSK-63 Positions lower revolver:9 Speed live tools: 6000Rpm Power live tools: 5,5kW Length: 6100mm Width: 3230mm Height: 3100mm Weight: 16600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2001, condition: excellent (used), For sale: Costa A1 ACT 1150 belt grinder, year 2001. Configuration: soft cylinder with electronic segmented pad. Working width: 1150mm Belt dimensions: 1180x2620mm Pressure rollers for short workpieces. Fan for creating negative pressure, included. Bljdpjgq U R Nefx Abtjl Air blast for both units. Total weight: 2500 kg 2 motors: 7.5 kW and 15 kW Total power: 27 kW Very good condition, machine is regularly serviced. Available immediately.

Condition: excellent (used), possibility of sanding on the shoe or flat surface mechanical oscillation feed speed adjustment via variator electric adjustment of the aggregate up/down sanding belt height 150 mm table angle adjustment possibility of sanding curved elements Blsdpfx Absy N Ry Hotol total motor power 5.7 kW year of manufacture: 1994 power supply 380V

Condition: good (used), Year of construction: 1994, power: 75 kW (101.97 HP), pressing force: 315 t, ram plate width: 1,000 mm, ram plate length: 1,500 mm, year of last overhaul: 2018, Pressure: 315 t Stroke: 20-150 mm Blsdjzxwz Hopfx Abtsl Adjustable ram stroke min./max.: 20 - 150 mm Table size: 1780 x 1250 mm Ram area: 1500 x 1000 mm Total power requirement: 75 kW Machine weight approx.: 46 t Additional information: - Installation height with max. stroke, adjustment at the bottom, installation at the top: 00 mm - Table opening: 1200 x 300 mm - Recess in the table: 1300 x 400 x 80 mm - Stroke rate continuously adjustable: 20-120 strokes/min.

Condition: new, Instead of €14,874 gross RRP, now only €9,499 net (€11,304 gross incl. 19% VAT). You save -24% compared to the RRP! TIGERMETAL WH150 – Hydraulic Workshop Press 150 Tons | Electric + Manual Pump The TIGERMETAL WH150 workshop press is a powerful industrial press designed for the most demanding applications in workshops, production, and maintenance. With a pressing force of 150 tons, the machine is ideal for heavy-duty straightening, pressing, and bending operations in professional environments. Thanks to the combination of electric drive and manual hand pump, the press allows both fast operation and highly sensitive, precise pressure control – especially for delicate workpieces. 🔧 Technical Data: Model: WH150 Manufacturer: TIGERMETAL Pressing force: 150 tons Drive: Electric motor + manual pump Motor power: approx. 4 kW Connection: 400V – 16A – 50 Hz Max. working pressure: approx. 310 bar Stroke: approx. 400 mm Working width: approx. 1200 mm Max. working height: approx. 1000 mm Weight: approx. 1080 kg Advantages: ✔ Combined operation (electric + manual) ✔ Extremely high pressing force for heavy-duty applications ✔ Precisely controllable pressure ✔ Laterally movable cylinder ✔ Height-adjustable crossbeam ✔ Heavy-duty, durable steel construction ✔ Integrated pressure gauge (manometer) ✔ Safety valve for overload protection ✔ Optionally expandable with accessories The WH150 is the ideal solution for anyone looking to combine maximum pressing power with the highest level of precision, flexibility, and industrial reliability. The laterally movable cylinder and height-adjustable working table ensure maximum flexibility and optimal adaptation to a wide variety of workpieces. The massive steel construction guarantees maximum stability, safety, and a long service life – even under intensive industrial use. Some images may show a slightly different version than the one offered here. The version shown in some pictures may include an additional automatic function. A wide range of additional workshop presses in various designs, sizes, and with optional equipment is available! Available versions: 30 tons 60 tons 100 tons 150 tons 200 tons 200 tons: on request Custom machines: on request Blodpfx Abef Sqckstol New machine! We are also happy to manufacture a custom-built press tailored to your requirements. A demonstration machine can be tested on-site under power. ----- Please feel free to contact us – we will be happy to advise you without obligation. ----- The stated price is net plus 19% VAT. All information without guarantee! Delivery available throughout Europe! The European Commission provides a platform for online dispute resolution (OS platform). This offer serves solely as an online presentation of our products. Contract negotiations are conducted via telecommunication (email, fax, phone, messaging platforms). You will first receive a non-binding offer including our general terms and conditions as well as information on your right of withdrawal before any purchase/contract is concluded.

Condition: good (used), Year of construction: 2000, Weinig A5 outfeed with automatic board stacker. Bedpfx Abezv S Dqetell -Boards are automatically transported laterally with the Weinig 820 right angle transfer. -Boards automatically form a layer and are then placed on the lifting table of the chain conveyor -The completed pack is transferred to the following chain conveyor -Maximum output: 40 cycles/minute for stacker (over 150m/min based on average length boards). -Space required: Length approx. 8000 mm, Width approx. 5000 mm approximately -Pack size max 6100mm x 1200mm x 1200mm(high)

Year of construction: 1990, condition: used, ENGEL - ES 700/150 150 ton, 392 cm³, Strok: 420 mm Bedpfx Abjzxrd Astsll

Condition: excellent (used), Year of construction: 2008, DEMAG Injection Moulding Machine System 1500/1500-16000 Basic Data Manufacturer: DEMAG Model: System 1500/1500-16000 Year of manufacture: 2008 Clamping Unit Clamping force: 15,000 kN Dimensions of mounting plates (H × V): 2150 × 1880 mm Clearance between tie bars (H × V): 1500 × 1250 mm Minimum mould height: 700 mm Maximum mould height: 1400 mm Maximum opening stroke: 2900 mm Injection Unit Screw diameter: 145 mm Injection volume: 10,981 cm³ Injection weight (PS): 9,880 g Maximum injection pressure: 1454 bar Electrical and Hydraulic Equipment Rated pump motor power: 165 kW Heater power: 97 kW Machine Dimensions and Weight Net machine weight: 74 t Control cabinet weight: 21 t Total weight: approx. 95 t Dimensions (L × W × H): 14.4 × 3.4 × 2.9 m Service History / Repairs 2010 – new screw with RSP and barrel 2015 – new IBED 2015 – new wiring board 2017 – new motor and pump no. 2 2017 – new injection cylinder rod BS with seals 2017 – replacement of oil cooler circulation pump 2017 – replacement of TeachBox (robot) 2018 – replacement of pumps P1 + P3 (at 65,800 h) 2018 – hydraulic oil change Bledpfxeyugale Abtel Optional ESS (Energy Saving Systems) The machine can be equipped with a modern ESS servo drive system, which significantly improves energy efficiency in hydraulic plastic injection moulding machines. The system controls the operation of the hydraulic pump motor through a frequency inverter, which adjusts the motor speed to the machine’s actual demand during the production cycle. As a result, electricity is consumed only when it is truly needed. Main Benefits - Up to 30% reduction in energy consumption - Servo drive technology for hydraulic pumps - Global quality and proven technology used in the plastics processing industry - Reduced energy loss during machine idle time - Lower heating of the hydraulic system - Extended service life for the motor and hydraulic components - Option for installation in existing hydraulic injection moulding machines The ESS system allows significant reduction of machine operating costs while maintaining full production performance parameters.

Condition: defective spare-parts repository (used), Year of construction: 1994, functionality: not functional, We are selling an industrial robot, type IRB 1500, with an S3 controller from ABB Robotics, manufactured in 07/1994. Bljdpfezh Uvgsx Abtel The unit is defective/not operational and displays the following error messages (see photos): - 506 Servo error 2 - 536 Motor overload error The robot can be moved slightly intermittently until the error messages reappear. We are selling the robot as a complete package, including the control cabinet, operator panel, and metal frame. Individual parts are not for sale. Please note that we offer neither a guarantee nor a warranty. Returns after purchase are not possible. After the purchase, the robot can be collected by appointment during our business hours. If required, we will gladly assist with loading. Selling price: €3,250 (negotiable) plus VAT.

Condition: good (used), Tecnodom Master 150 Gastro refrigerated counter Description Refrigerated counter in modern design. Ventilated version, equipped with subcooling, lighting in the cove and a non-refrigerated glass intermediate shelf. Analog temperature display and night cover in the form of plexi sliding windows. Very suitable for your cafeteria, sandwich store, supermarket and any catering company. Plastic sliding window included With curved tilt window Including middle stage Specifications Dimensions WxDxH: 1500x898x1243 Interior dimensions: 138x56x70 cm Connection value: 0,65 kW Connection voltage: 230V Temperature range degrees: +2 to +6 degrees More articles - new and used - you can find in our store! International shipping costs on request! Bsdpfong Aytsx Abtell

Condition: excellent (used), Year of construction: 2006, Berg & Schmid CNC Sawing Machine Year of manufacture: 2006 Control system: - CNC control (freely programmable) Cutting range: - Round: 410 mm - Flat: 410 mm - Width 3500 x Length 2000 x Height 2200 mm - Working height 730 mm Cutting speed: - 12 – 110 m/min. - Material feed via precision ball screw and linear guide. - Hydraulic saw blade tensioning. Blodpfx Aozp Inlobtsl - Automatic double-sided saw blade free-travel device. - Hydraulically driven chip conveyor. - Chip pressure regulation for thin-walled tubes and profiles. - Frequency-controlled sawing drive, stepless. - Automatic initial cut function. - Saw blade path monitoring Sawing drive: - 5.5 kW Accessories: - 10 new saw blades Delivery time: - Immediate