Used Behringer Vps60-220A for sale (135)

Condition: used, Behringer VPS60-220A - Industrial Plate Sawing Machine Hnsdpfjz H Ac Nsx Akrou The BEHRINGER VPS60-220A is a fully automatic industrial plate sawing machine / vertical bandsaw. It is designed for sawing large metal plates, slabs, and blocks across the grain – in particular, steel, aluminum, and other metals. - Chip conveyor - Safety device consisting of a safety fence and light barriers - Staircase - Operating manual and technical documentation - Year of manufacture: 2015 Technical Data - Cutting range (W x H): 2250 x 600 mm - Minimum flat (W x H): 500 x 20 mm - Maximum round: 500 mm - Minimum remaining piece length in automatic operation: from 40 mm - Minimum remaining piece length in manual operation: from 30 mm - Saw band dimensions: 11080 x 54 x 1.6 mm - Cutting speed: 17 – 120 m/min - Material support height: approx. 1650 mm - Quantity of coolant: approx. 250 l - Motor power – sawing drive: 7.5 kW - Motor power – hydraulic pump: 2.2 kW - Motor power – coolant pump: 0.33 kW - Motor power – chip conveyor: approx. 0.25 kW - Connection value: approx. 15 kW - Voltage: 400 V, 50 Hz - Control voltage / hydraulic valve voltage: 24 V = (DC) - Current consumption: approx. 35 A - Fuse rating: 50 A - Minimum cable cross-section: 35 mm² - Machine dimensions W x H x D: 17793 x 9817 x 4500 mm - Weight (net): approx. 19000 kg

Condition: ready for operation (used), Year of construction: 1991, cutting diameter 220 mm capacity 90 degrees: square 220 x 220 mm turning speed range: 20 - 140 m/min saw band length 3720 x 34 x 1.1 mm height of material-table 825 mm coolant capacity 80.0 l feed length max. 600 mm total power requirement 2.5 / 3.5 kW weight of the machine ca. 1500 kg range L-W-H 2350 x 2050 x 1500 mm Hodpfx Aexab R Uekrsnu - in checked conditions - machinevideo - ?v=joc0EbemYC8 Equipment: - electro-hydraulic band saw - FULLY AUTOMATIC - for sawing hollow profiles and solid materials made of steel, stainless steel, . tool steel, non-ferrous metals and plastic - control panel on the front right * including button for manual operation (setup/individual cut) - electro-hydraulic material clamping - stepless cutting speed .. 20-140 m/min. - electro-motor chip conveyor - manual adjustment of the material feed range * via handwheel including analogue value display - automatic height adjustment of the saw frame * including device for material detection (start of cut) - coolant device

Condition: used, Year of construction: 2011, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 400 mm, cutting width (max.): 850 mm, control type: CNC control, pivoting range: 75 °, actuation type: electric, rotational speed (max.): 4,000 rpm, rotational speed (min.): 200 rpm, total height: 3,200 mm, total length: 5,100 mm, total width: 3,300 mm, overall weight: 9,000 kg, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, lighting, motor brake, 1 Mono-spindle drilling machine HDM + HBP band sawing machine Type: HDM 910 HBP 430/854 G (drilling and sawing line for steel construction) Manufacturer: Vernet - Behringer Drilling machine: - Dimensions of working unit: H=3200 L=5100 W=1800 - Weight: approx. 6 tons - Drilling power: 11.7 kW - Rotating speed: 200 to 4000 RPM - Cooling: external lubrication or by centre-cooled drills Sawing machine: - Machine size: Length=1850mm swivel range 3500mm Width=3300mm swivel range 3500mm Height=2600mm - Saw band size: 6.700 x 41 x 1.3mm - Weight: approx. 3 tons Hnjdpfx Ajzytmzskrju - Electric equipment: 400V / 50Hz - Power of motor: 7.5 kW, frequency regulated - Cutting speed: 17-110 m/min Technical capacities: more information can be found in the documentation - Max length of bars: 18m - Max weight of bars: 5 tons Sawing capacities: more information can be found in the documentation Tool clamp: ISO 40 Tool holders: 2x 5 pockets The industrial PC and the business software were updated in April 2025 (retrofit). The installation has been serviced annually.

Condition: good (used), Year of construction: 2000, functionality: fully functional, Bandsaw machine Behringer HBM 430A Year of manufacture: 2000 Includes roller conveyor, 2100mm The bandsaw machine is fully functional and currently still in use in production. An inspection while the machine is running can be arranged. Available from December 2026! Cutting range, round: 430mm Cutting range, flat: 430 x 430mm Drive power: 7.5KW Cutting speed: 17 - 120 m/min. Machine dimensions (L x W x H): 460 x 360 x 220cm Weight: approx. 3400kg Hnjdpfx Aksz E Nnijreu

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, operating hours: 11,000 h, 1. Applications & Design Designed as a horizontal bandsaw with a table layout, this machine is ideally suited for use in forges, rolling mills, die casting operations, steel finishing facilities, and tool & mold manufacturing environments. Its low table height enables installation directly on standard shop floors, simplifying material transport and handling. 2. Cutting Capacity Cutting range for round material (90°): up to 1,100 mm Cutting range for flat material (90°): up to 1,100 × 1,100 mm (Approximately 43.3 × 43.3 inches) 3. Performance & Drive System Drive power: 15 kW Saw blade speed: Infinitely adjustable between 8 – 84 m/min Total installed power: 30 kW Saw blade dimensions: 14,330 × 80 × 1.6 mm 4. Table Specifications Table size (L × W): 3,000 × 1,500 mm Maximum table load: up to 30,000 kg Workpiece support height: 700 mm 5. Machine Footprint & Weight Overall length: 6,000 mm (approximate) Width: 8,100 mm (approximate) Height: 3,850 mm (approximate) Machine weight: around 16,000 kg Hsdow Tulgspfx Akrenu 6. Notable Features & Options Independent traversable clamping system: Both the material clamping vice and the blade guide arms are independently movable, allowing large or oversized workpieces to be securely clamped without manual repositioning to a fixed side. Robust gantry frame: Two solid columns and support bars provide excellent stability, high load capacity, low vibration operation, and long service life. Optional 90° blade guide rotation: Allows both vertical and horizontal cutting, especially useful for notching sample workpieces. Powered duplex chip brushes: These automatically adapt to keep the saw blade clean during operation, enhancing blade life and reducing maintenance of the brushes. Integrated chip conveyor with coolant tank: Located beneath the cutting zone – collects chips and coolant, can be pulled out easily for cleaning. Open-access design for easy maintenance: All wear and maintenance parts are easily accessible, simplifying servicing, blade changes, and minor repairs. No foundation work required for installation.

Condition: used, Year of construction: 2014, Behringer LPS 40-4 - Vertical metal bandsaw - Hydraulic band tensioning - Servo-controlled feed - Sturdy C-frame - Year of manufacture: 2014 Technical data - Working area (L x W x H): 4000 x 680 x 400 mm - Smallest cutting height: 10 mm - Minimum cutting width: 15 mm - Inner table support area: approx. 680 x 4000 mm - Inner table maximum load: 7500 kg - Outer table support area: approx. 680 x 4000 mm - Outer table maximum load: 9500 kg - Material support height: approx. 1385 mm - Cutting speed: 17 - 120 m/min - Saw band dimensions: 5400 x 54 x 1.6 mm - System/band tensioning pressure: 85 bar - Coolant capacity: approx. 250 l - Motor power - saw drive: 5.5 kW - Motor power - hydraulic pump: 2.2 kW - Motor power - chip conveyor: approx. 0.26 kW Hsdpoz H Acpjfx Akrjnu - Connection value: approx. 11 kW - Voltage: 400 V, 50 Hz - Control voltage / hydraulic valve voltage: 24 V= (DC) - Current consumption: approx. 25 A - Fuse rating: 35 A - Conductor cross-section: min. 10 mm2 - Machine dimensions W x H x D: 6450 x 2870 x 2350 mm - Weight (net): approx. 10000 kg

Condition: good (used), Year of construction: 1998, functionality: fully functional, Bandsaw automat Behringer HBP 303A / PCM Year of manufacture: 1998 Including magazine for up to 9 tons Magazine dimensions: (L x W x H) 480 x 400 cm Capacity for 9 bars. Length approx. 8 m The bandsaw automat is fully functional and currently still in use in production. An inspection while the machine is running can be arranged. Available from December 2026! Cutting range: 260 mm Hodpfsz E Np Hsx Akronu Saw motor drive power: 4 kW Total drive power: 15 kW Cutting speed: 10 - 120 m/min. Machine dimensions (L x W x H): 320 x 260 x 220 cm Weight: approx. 2500 kg

Year of construction: 2019, condition: ready for operation (used), Plate processing center manufactured in 2019. This Behringer MAG EVO 420 is suitable for drilling, tapping, marking, milling, and plasma cutting of flat steel and sheet metal. It features a roller conveyor for sheets up to 4000 x 2000 mm and an automatic turret tool changer with 14 tool positions. If you are looking to get high-quality plate processing capabilities, consider the Behringer MAG EVO 420 machine we have for sale. Contact us for further details. - Infeed System: Roller conveyor for flat steel/plates up to 4000 x 2000 mm with zero-position transverse conveyors, NC feed carriage, and retractable clamps- Outfeed System: Outfeed roller conveyor with lowerable discharge table and chute into material collection container for small parts- Drilling Unit Drive Power: 16 kW- Spindle Speed: 160 to 4000 RPM- Tool Changer: Automatic turret tool changer with 14 tool positions- Software Options: Milling, V-scoring marking, and DSTV interface for machining data import- Plasma Cutting Unit: Kjellberg HiFocus 360i (for material thicknesses up to 50 mm)- Exhaust System: Large-dimensioned filter unit of older year of manufacture with available piping- Control & PC: Modern CNC control enabling remote maintenance by Vernet Behringer service department, machine computer including software, and office software license- Sheet Dimensions: Min. 1500 x 300 mm (750 x 400 mm with restriction), Max. 4000 x 2000 mm- Min. Finished Part Dimensions: 80 x 80 mm- Sheet Weight: Max. 2000 kg and 650 kg/m- Drilling Diameter: 5 to 40 mm- V-Scoring Marking Depth/Diameter: 5 to 40 mm- Plasma Cutting Thickness: 5 to 50 mm- Number of Carriages: 2 clamps - feed carriage, laterally placed- Number of Clamps: 4 clamps (2 + 2)- Transverse Conveyors: 3 short-stroke transverse conveyors to align sheets against clamps after loading- Working Height: 1000 mm Hnjdsz H Nwgepfx Akreu

Condition: used, Year of construction: 2013, functionality: fully functional, cutting height (max.): 310 mm, cutting width (max.): 520 mm, Equipment: CE marking, documentation/manual, Behringer HBP 310-523 GA NA 300 PC, manufactured in 2013, with extensive equipment: PHOTOS will follow! - Powered infeed conveyor with cross transport - 3000 mm feed gripper with single-stroke, rotating movement - Double miter saw - Powered outfeed conveyor with hydraulically pivoting bridge - Pusher on fixed supports Hodpoz A Arcofx Akrjnu - General technical data in the appendix This CNC-controlled sawing system is ideally suited for steel trading, mechanical engineering, and metal construction. Lengths, miter cuts on both sides, and material removal – all automatic.

Condition: used, Year of construction: 2017, Behringer LPS 60-T – Vertical metal band saw - Servo feed with cutting pressure control - Robust cast iron band guide - Fast band change - Operating hours of the saw drive: 32441 h - Year of manufacture: 2017 Technical data - Working area L x W x H: 1260 x 720 x 600 mm - Minimum material height: 10 mm - Minimum section width: 5 mm - Inner table support area: approx. 1260 x 680 mm - Inner table max. load: 3000 kg - Outer table support area: approx. 1260 x 680 mm - Outer table max. load: 3000 kg - Material support height approx.: 1050 mm (incl. base pan) - Cutting speed: 10 - 110 m/min - Saw band dimensions: 5400 x 54 x 1.6 mm - System/band tension pressure: 85 bar Hnsdjz H Ac Aspfx Akreu - Coolant quantity: approx. 100 l - Motor power – Saw drive: 5.5 kW - Motor power – Hydraulic pump: 2.2 kW - Motor power – Coolant pump: 0.15 kW - Motor power – Chip conveyor: approx. 0.26 kW - Connection value: approx. 10.5 kW - Voltage: 400 V, 50 Hz - Control voltage / hydraulic valve voltage: 24 V = (DC) - Current consumption: approx. 31 A - Fuse rating: 35 A - Conductor cross-section: min. 10 mm2 - Machine dimensions W x H x D: 3150 x 2970 x 2500 mm - Weight (net): approx. 3200 kg

Condition: used, Year of construction: 2013, functionality: fully functional, cutting height (max.): 310 mm, cutting width (max.): 520 mm, Equipment: CE marking, documentation/manual, Behringer HBP 310-523 GA NA 300 PC, manufactured in 2013, with extensive equipment: PHOTOS will follow! - Powered infeed conveyor with cross transport - 3000 mm feed gripper with single-stroke, rotating movement Hedpfxezdq Hms Akrenu - Double miter saw - Powered outfeed conveyor with hydraulically pivoting bridge - Pusher on fixed supports - General technical data in the appendix This CNC-controlled sawing system is ideally suited for steel trading, mechanical engineering, and metal construction. Lengths, miter cuts on both sides, and material removal – all automatic.

Condition: excellent (used), Year of construction: 2022, Available immediately. Behringer LPS 60 TA, manufactured in 2022, in excellent condition. This is a very special band saw; it operates fully automatically! - Auto feed control with cut monitoring - Saw band drive 5.5 KW - 10-120 M/min - 54 mm band - Clamping device for saw sections - Line laser Advantages of the LPS-TA table band saw Unsurpassed precision and cutting performance High cutting accuracy, smooth running, and long band life are due to the special, torsion-resistant design of the saw frame. Unique feature: the force transmission of the saw feed is located directly below the cutting point. Advantages in material procurement By producing flat materials from large sheets, efficiency gains can be achieved in both storage and the purchase of raw materials. Clamping device for layered cuts (option) For sawing larger batch sizes, sheets can be stacked in layers and securely held in place using the optional vertical additional clamping device. Chip conveyor as standard Below the saw unit, directly in the direction of chip flow, there is a large-sized chip conveyor with an integrated coolant tank. Chips and coolant are collected and separated in this tank. For cleaning and maintenance work, the conveyor can be extended out of the machine frame. Powered duplex chip brushes effectively clean the saw band, thereby increasing tool life. The brushes are automatically adjusted to the saw band and ensure consistent cleaning performance. Automatic feed device Through the combination of an NC-controlled feed device and intelligent control, sheets can be separated into strips fully automatically. Servo feed system The use of the Behringer servo feed system creates a constant chip removal rate and utilizes the performance of modern saw bands more effectively. The rapid response of the servo feed system to the sensors of the cutting pressure control consistently prevents overloading and premature wear of the saw bands. Hsdpfezubxhsx Akronu Quick saw band change ensures the shortest possible setup times. In just two to three steps, the saw band can be moved to the change position. Band-guiding parts made of gray cast iron are made by Behringer and ensure vibration damping directly at the cutting point, thereby increasing tool life. Compact Due to its compact dimensions, the table band saw can be installed even in confined spaces. Movable material support table For easy loading and unloading by crane, the material table can be extended out from under the saw unit.

Condition: good (used), Year of construction: 2018, Burning and Drilling System Plate Processing Center Manufacturer: Vernet-Behringer Type: MAG EVO 420 Year of construction: 2018 CNC control Power source: Kjellberg HiFocus 360 Plasma cutting for material thickness: 5 to 50 mm Spindle speed: 160 – 4,000 rpm Automatic turret Tool holder: 14 Drive power: 16 kW Drilling diameter: 5 - 40 mm V-scoring for marking: 5 to 40 mm Sheet metal dimensions min.: 1,500 x 300 mm (750 x 400 mm with limitations) Minimum dimensions of finished parts: 80 x 80 mm Sheet metal weight max.: 2,600 kg and 650 kg/m Infeed side: Roller conveyor for flat steel or plates: 4,000 x 2,000 mm Zero-point transverse conveyor Number of carriages: 2 clamps NC feed carriage, positioned to the side 4 clamping jaws (2+2) 3 short-stroke transverse conveyors Working height: 1,000 mm Outfeed side: Outfeed roller conveyor with a lowerable discharge table with a chute into a material collection container for unloading small parts. Filter unit incl. piping Powerful for use with carbide tools. For drilling, tapping, marking, milling, Hnodpfx Akovzrczorsu plasma cutting of flat steel and sheets. Software options for milling and scoring LANTEK license 121026ä Availability: immediate!

Condition: ready for operation (used), Year of construction: 2020, total width: 865 mm, total height: 2,175 mm, overall weight: 470 kg, cutting speed: 68,000 mm/min, product length (max.): 1,335 mm, Circular Metal Saw manufactured in 2020. This Behringer VMS 370 PV features a cutting capacity of up to 130 mm for round material and 120 x 120 mm for square material. It includes a saw blade diameter of 370 mm and a hydro-pneumatic saw feed. If you are looking to get high-quality cutting capabilities, consider the Behringer VMS 370 PV machine we have for sale. Contact us for further details. • Cutting capacity at 90°: • Round: up to 130 mm diameter • Square: up to 120 × 120 mm • Flat: up to 200 × 100 mm • Cutting capacity at 45°: • Round: up to 130 mm diameter • Square: up to 100 × 100 mm • Flat: up to 140 × 100 mm • Cutting capacity at 30°: • Round: up to 105 mm diameter Hjdsz Dg Idepfx Akrsnu • Square: up to 90 × 90 mm • Flat: up to 100 × 100 mm • Saw blade diameter: 370 mm • Motor power: 2.0 / 2.6 kW • Saw blade speeds: 17 / 34 / 68 rpm • Optional saw blade speeds: 8 / 16 / 32 / 64 rpm • Saw feed: Hydro-pneumatic • Material clamping: Pneumatic • Mitre cutting range: -45° to +45° • Additional mitre angle: 30° on one side • Coolant system: Integrated • Material support height: 900 mm

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 2,000 kg, Equipment: CE marking, Behringer HBP 263 A – Heavy-Duty Automatic Band Saw (Year 2007) For sale: A high-quality, German-engineered Behringer automatic band saw in excellent condition. Hsdpfxjyv Arno Akrenu This machine is well-known for its precision and durability, and this particular unit has been meticulously maintained. The saw is in premium condition and is equipped with top-tier features. Inspection is welcome! Key Features & Options: • Automatic Start with Laser: Significantly reduces setup time (see video at 0:55). • Variable Frequency Drive (VFD): Infinitely adjustable blade speed control (no maintenance-prone variator belts). • Misting/Coolant System: Essential for tube cutting – keeps the environment clean and prolongs blade life. • Automatic Pressure Regulation: Automatically reduces feed pressure for optimal cutting performance. • Chip Conveyor: Automatically keeps the workspace clean. • Blade Cleaning Brush: Extends blade life and enhances cut quality. • Safety Features: Full protection against blade jamming, breakage, etc. Maintenance History: The saw has undergone a comprehensive overhaul, including thorough testing and calibration. Recent service includes: • Control panel and electrical system checks. • Blade guides serviced. • Complete oil change (Gearbox filled with Shell fully synthetic oil = extended service intervals). • All filters replaced. Technical Specifications: • Cutting Capacity at 90° (Round / Square): 260 mm / 260 x 260 mm • Cutting Capacity at 90° (Flat): 300 x 260 mm • Stepless Cutting Speed: 20 – 120 m/min • Saw Band Dimensions: 4,640 x 34 x 1.10 mm • Saw Motor Power: 3.00 kW • Total Power Requirement: 8.00 kW • Min. Cutting Length / Diameter: 10 mm / 15 mm • Machine Weight: approx. 2,000 kg • Dimensions (L x W x H): approx. 2.60 x 1.60 x 1.90 m

Condition: used, Year of construction: 2008, functionality: fully functional, operating hours: 7,765 h, Behringer HBP 263 AG fully automatic metal bandsaw (2008) Manufacturer: Behringer Model: HBP 263 AG fully automatic metal bandsaw Hodpfx Aozwhdpjkrenu Year of manufacture: 2008

Condition: used, Year of construction: 2019, Saw blade diameter: 350 mm Cutting area flat 90°: 170 x 100 mm Sawing area flat 45°: 120 x 100 mm Cutting area round: 120 mm Pneumatic Saw Blade Feed Coolant pump / minimum quantity spray device Pneumatic material clamping Presented for sawing of stainless steel Length stop with automatic positioning up to 6200 mm Hnjdpfx Akeznxg Norju Roller conveyor with 1000 mm left Weight: approx. 800 kg

Condition: used, Year of construction: 2016, Machine type : Horizontal bandsaw, dual-column Manufacturer : Behringer Model : HBP 313 Serial number : 10009454 Year of construction : 2016 Cutting capacity (round) : Ø 310 mm Cutting capacity (rectangular) : 310 × 310 mm Blade dimensions : 4,470 × 34 × 1.1 mm Blade speed : 15 to 110 m/min (adjustable) Control type : Semi-automatic Blade guide : Carbide Feed descent : Hydraulic Clamping system : Hydraulic vice Power supply : 400 V / 50 Hz / 3~ Motor power : 4 kW Machine Application The Behringer HBP 313 is a horizontal bandsaw designed for precise cutting of profiles, solid bars, tubes, and full-section steel. It is ideal for metal fabrication shops, steel structure production, and sawing centers. Features / Differences – Dual-column frame ensures stability and rigidity during cutting. – Fully hydraulic system for saw frame feed and material clamping. Hnodjw Dd Ruopfx Akrsu – Carbide blade guides provide straight, vibration-free cuts. – Wide blade speed range (15–110 m/min) adapts to various steel grades and materials.

Condition: used, Year of construction: 2014, machine/vehicle number: 0102-260015, The Behringer HBE 261 A Dynamic automatic band saw is a fully hydraulic, cost-effective, high-performance band saw designed for automated 90° cuts in industrial manufacturing. This Behringer band saw is ideal for the safe, precise cutting of structural steel sections as well as difficult-to-machine solid metal materials and comparable solid plastics, in both manual and automatic modes. Hsdpfx Ajzfw Dhekrjnu The HBE 261 A Dynamic automatic band saw has a cutting range of 10 mm to 260 mm for round material and 10 x 8 mm to 300 x 260 mm for flat material, with a saw blade size of 4.440 x 34 x 1.1 mm. The frequency-controlled band saw drive has a drive power of 2.6 kW and a continuously variable cutting speed of 15–110 m/min. The cutting speed can be set and read on the control panel. The total drive power is approximately 3.7 kW. The machine features optional equipment such as a chip conveyor, central lubrication, a line laser, electronic monitoring of the minimum speed, an LED worklight, a spray gun for chip removal, a cutting display with error diagnosis, and a roller conveyor system on the infeed and outfeed sides.

Condition: new, functionality: fully functional, total length: 1,385 mm, total width: 2,900 mm, total height: 2,150 mm, type of input current: three-phase, saw blade speed: 150 rpm, pivoting range: 45 °, input voltage: 400 V, overall weight: 1,600 kg, cutting range round steel at 45°: 320 mm, cutting range round steel at 90°: 320 mm, warranty duration: 12 months, cutting range square steel at 45°: 320 mm, Equipment: rotational speed infinitely variable, Advantages of the miter bandsaw HBE320-523G Sensitive Behringer cutting pressure control increases cutting performance when sawing tubes and profiles, as it automatically adjusts the saw feed of the machine to the changing material cross-sections. Due to its arrangement directly on the back of the saw band, the system regulates quickly and precisely. Precise guide system in portal design The combination of a stable, low-vibration saw frame and the linear guide system in portal design ensures the best miter cuts and maximum service life of the miter bandsaw. Micro-spray system When sawing profiles, tubes and solid material, the standard minimal quantity lubrication system delivers the best results. The saw band is constantly wetted with cutting oil via two nozzles. This guarantees a long service life of the saw band and a clean working environment. 3° inclination of the saw band enables higher cutting performance when sawing hollow profiles and beams and reduces burr formation. Customer-oriented sawing concepts Behringer offers complete system concepts with individual transport solutions, where everything fits together perfectly. We are a competent partner and provide comprehensive advice. Closed material table The closed table support facilitates work with the miter bandsaw. Even short sections can be easily transported in and out of the machine. Band-guiding parts made of cast iron are made by Behringer and ensure vibration damping directly at the cutting point, thus increasing the tool life. Automatic guide arm adjustment Optimal sawing result without adjustment effort - even with frequently changing material widths. Feed control with servo drive optional Optionally, the saw feed is carried out by means of a ball screw and servo motor. This results in significantly shorter non-productive times and more precise saw feeds. Hjdpfoz Rzugox Akrenu Electrically driven chip brush with BEHRINGER quick-change system for tool-free brush change. The special engagement angle protects the teeth of the saw band. Energy-efficient drive system More output with lower energy consumption. Protects the environment and your wallet.

Condition: used, Year of construction: 1985, cutting diameter 200 mm band length . mm stroke . mm total power requirement . kW weight of the machine ca. . t dimensions of the machine ca. . m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Hnjdpez Icx Hjfx Akrju We look forward to your visit. Your Markus Hirsch Team

Condition: defective spare-parts repository (used), Year of construction: 1986, Behringer band saw, fully automatic, in perfect working order. Old, robust technology without sensitive electronics. Maximum cutting capacity at 90°: 500 mm Motor power: 5 kW Saw blade length: 6900 mm Hnedpfx Ajzvnkyjkrou Unfortunately, the machine was delivered without a control cabinet. As the previous operator scrapped it, the machine can now only be offered as a source of spare parts. Upon request, transport and loading can be arranged throughout Europe for an additional fee. Prices do not include VAT. Inspection is possible by appointment. Please contact us; our team will be happy to assist you. Machine buying and selling WE BUY/SELL PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, AND MORE. Do you need a high-quality, yet affordable machine for your production? Or would you like to sell yours? For further information or to contact us, please use the contact form.

Condition: excellent (used), Year of construction: 2012, Vernet Behringer HD-X 918 / HBP 410/923 CNC Sawing / Drilling Line – Year 2012. Split system. 3 Spindle. Automatic tool changer. 24 metres infeed. 18 metres outfeed. Hjdjx Ruudopfx Akrenu Gripper Feed measuring system. Infeed and outfeed Cross Transfers.

Condition: used, Year of construction: 1991, functionality: fully functional, Behringer bandsaw automat Model HBP 360 A Hedpfx Akezzpwfsronu Year : 1991 Capacity round : 360 mm. Capacity square : 360 x 360 mm. Cutting speed : 20-130 m. / min. Max. feed pr. stroke : 600 mm. Band size : 5400 x 41 x 1,3 mm. Power : 7,5 kW Well maintained machine Delivery time 4 weeks

Year of construction: 2024, condition: new, We sell chip brushes for the common machine types for Behringer and Kasto sawing machines. Hjdpfx Aov Uau Sjkrenu Minimum order quantity 20 pieces. We are happy to answer your inquiries.