Used Bitherma Manometer for sale (218)

Condition: good (used), Manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology Rcjdpjb A R T Defx Anyof -Screw connection: G 1/2" -Display: up to 4 bar -Quantity: 6 available Price: per package -Weight: 0.6 kg

Condition: good (used), Manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology -Screw connection: G 1/2" -Display: up to 10 bar -Quantity: 6 available Rsdpfxeb A R T Ae Anyecf Price: per package -Weight: 0.5 kg

Condition: good (used), Manometer, test manometer, Bourdon tube pressure gauge, pressure-temperature measurement technology -Manufacturer: GSL, pressure gauge with glycerine filling. -Type: 0 to 250 bar -Screw connection: see photos Rcsdpfx Ajv Rniponyof -Number: 103x pressure gauges available -Price: per piece / from 2 pieces 12,- €/piece / from 10 pieces 10,- €/piece -Dimensions box: 90/70/H40 mm -Weight: 0.2 kg/piece

Condition: used, Manometer, test manometer, pressure gauge with Bourdon tube, pressure and temperature measurement technology -Manufacturer: Wika, capsule spring pressure gauge, unused original packaging -Type: 0 to 4 bar -Screw connection: see photos Rjdpfxoirax Rj Anyjcf -Number: 9x manometer available -Price per piece -Dimension: 110/85/H110 mm -Weight: 0.8 kg/pcs

Condition: good (used), Manometer, test manometer, pressure gauge with Bourdon tube, pressure and temperature measurement technology -Manufacturer: Wika, pressure gauge -Type: 0 to 16 bar Rodpjiraygjfx Anyjcf -Screw connection: see photos -Number: 2x manometer available -Price per piece -Dimension: 100/100/H195 mm -Weight: 2,1kg/pcs

Condition: used, Manometer, test manometer, pressure gauge with Bourdon tube, pressure and temperature measurement technology -Manufacturer: Wika, manometer -Type: 0 to 10 bar -Screw connection: see photos -Dimension: 100/50/H140 mm -Weight: 1,2 kg Redpsir A Rzsfx Anyocf

Condition: good (used), Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology -screw connection" -Display: 0-10 bar -Weight: 3.6 kg Rcjdpfxsb A Im Ns Anyof

Condition: excellent (used), Manometer, test manometer, Bourdon tube pressure gauge, pressure-temperature measurement technology -Manufacturer: Wika, capsule pressure gauge, unused OVP -Type: 612.20.100 0 mbar...250 mbar Rcedpfx Anoggy S Toyef -Art. No.: 9071687 -Screw connection: G1/2 B bottom -Number: 2x pressure gauges available -Price: per piece -Carton dimensions: 140/110/H55 mm -Weight: 0.6 kg/piece

Condition: good (used), Manometer, test manometer, Bourdon tube pressure gauge, pressure-temperature measurement technology -Manufacturer: GSL, pressure gauge with measuring hose -Type: 0 to 250 bar -Screw connection: see photos Rcedpfx Anjv Rnlqeyjf -Number: 30x manometers with measuring hose available -Price: per piece / from 2 pieces 40,- €/piece. -Transport dimensions: Ø 68 x 200 mm -Weight: 0.3 kg/piece

Condition: excellent (used), Manometer, test manometer, Bourdon tube pressure gauge, pressure-temperature measurement technology -Manufacturer: Wika, capsule pressure gauge unused OVP Type: 612.20.100 0 mbar...60 mbar -Art. No.: 9071652 -Screw connection: G1/2 -Number: 1x pressure gauges available -Price: per piece -Dimensions box: 140/110/H55 mm Rodpfx Aneggy Tfsyocf -Weight: 0.6 kg/piece

Condition: good (used), Manometer, test manometer, pressure measuring device with Bourdon tube, pressure-temperature measurement technology -Display: 0-16 bar Rsdpfx Aefx Auhsnyocf -Standard: EN 837-1 -Number: 3x manometers available -Price: per piece -Dimension box: 200/200/H60 mm -Weight: 2.1 kg

Condition: new, Pressure gauge, pump monitoring device for ABEL pumps, NEW. We need the pump type / series and the machine number from you. Most spare parts available from stock. Your reliable service partner and spare parts supplier for ABEL pumps. Rcedpjiyp R Hsfx Anyjf

Condition: new, Year of construction: 2024, neu 2024 7307 September 2026, Zwischenv Italien 11400 € 197.76 € 1 10300 € 100 to horizontal verschiebbar 500 mm 900 mm 1050 mm 25 mm/s 2 mm/s 2 kW 1900 mm 1000 mm 2400 mm 1250 kg 650 mm STROKE 500 MM 2 speeds machine table can be liftet with chains Rsdpfx Aswiqu Djnyecf control by handwheel and push button (2-hand) adjustable max. pressure manometer according to CE regulations user manual in GERMAN and ENGLISH

Condition: new, Year of construction: 2026, neu 2026 070240 Oktober 2026, Zwiswchenve Türkei 8300 € 160.19 € 1 100 to horizontal verschiebbar 300 mm 1070 mm Rjdpfjwirtzjx Anyocf 5 mm/s 10 mm/s 2110 mm 1000 mm 2430 mm 1500 kg demo machine / mint condition net price (price for new machine € 9.000,00) horizontally displaceable cylinder with clamping lever steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: three-phase, suction capacity: 2,800 m³/h, intake manifold diameter: 315 mm, filter area: 21 m², noise level: 68 dB, total height: 2,400 mm, total length: 1,000 mm, total width: 800 mm, overall weight: 250 kg, Oil mist extractor for CNC machines, Nederman NOM28 HEPA filter separator The NOM filter is designed for use with individual numerically controlled machines producing a limited amount of oil mist. NOM filters are intended for applications that require higher air flow rates. In metalworking workshops where oil mist removal is a challenge, these filters can be connected to a central duct system supplying all machines. All units are equipped with a manometer indicating when filter cleaning (self-cleaning) is required. Fan power: 2.2 kW Airflow: 2,800 m³/h Filtration area: Main filter – 21 m² HEPA filter – 40 m² Rcsdpsy R Aldofx Anysf The device is in excellent technical condition – like new. Stock number: 1134

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 17850 € 342.72 € 100 to fix 1020 mm 300 mm 1020 mm 680 mm 9 mm/s 5 mm/s 10 mm/s 6 mm 500x1020 mm Rjdpfxsynm Nmj Anyscf 100 mm 190 mm 2110 mm 1000 mm 2275 mm 2082 kg 2 guidings big upper tool holder and table with t-slots upper and lower pressbrake tool manometer rapid down move with automtic change to working speed piston stops in every position 2 hand panel AND FOOT PEDAL Tisch höhenverstellbar according to CE regulations user manual in GERMAN and ENGLISH

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei Rsdpfowiqm Hex Anyecf 17850 € 342.72 € 1 100 to 1000 mm 300 mm 7.5 kW 2110 mm 1000 mm 2275 mm 1900 kg 1 680 mm 1020 mm 5 mm/s 10 mm/s 6 mm 100 mm 190 mm 2 guidings big upper tool holder and table witht-slots upper and lower pressbrake tool manometer rapid down move with automtic changeto working speed piston stops in every position 2 hand panel and foot pedal height adjustable table user manual in Germanand English according to CE rules

Condition: used, Veneer machine with direct stacking Manufacturer: Fischer & Rückle Type: FZR15 / DAR 12 Year of manufacture: 2006 / 2014 Cross-feeding splicer For highly efficient cross-gluing of parallel-joined veneer strips into endless or component-specific veneer surfaces. The cut or rotary-cut veneers must be pre-glued with PVAc or urea adhesives. This cross-gluer is the most economical alternative to longitudinal gluers for cross-grain applications. Production Approx. 17-20 joining points/min Technical data Veneer strip length (grain direction): 350-1500 mm Veneer strip width (cross-grain direction): 50-500 mm Veneer strip thickness: 0.3-1.5 mm Equipment Feed device for efficient and convenient semi-automatic feeding of veneer strips. Plate automation for component-specific surfaces with pre-sorted components and a pre-selected number of veneer strips. Features - Perfect bonding of cut or rotary-cut veneer of all wood species, even with wavy or rippled veneer - Unique, tried-and-tested horizontal pressing system that results in fully closed, solid glue joints - Solid, robust construction for high durability, reliable and fail-safe operation - Easy operation thanks to screen, clear symbols, separate manometer with direct access, etc. - Liftable pressure bars for quick and easy access to the heating plates for cleaning - Few wear parts, low costs for service and maintenance Cross cutter For cutting to a pre-set format width (across the grain). The width is determined by two photoelectric cells that are mounted at the required distance from the cutter. Direct stacking device DAR-22 For outputting and stacking the veneer surface directly after splicing. The spliced surfaces are gently outputted and stacked on this compact direct stacking device without mechanical intervention. Rcedpfx Aozuz Hfsnyof Min. veneer sheet length (grain direction): 350 mm Veneer sheet width (across the grain): 250 - 1200 mm Max. stack height approx. (small sheets are not perfectly aligned): 500 mm Max. stack width (across the grain) for discharge to the rear end: 1200 mm Note: The technical data and descriptions are a transcript of the original order confirmation. Data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2017, Automatic cold press Rcjdpfx Aszuzw Donyof Manufacturer: CMB Type: PFR-CCL Year of manufacture: 2017 Technical data: Motorized loading table 3,500 x 1,600 mm for manual assembly of the plates and automatic loading into the press on the 1,600 mm side. Structure made of welded steel profiles. Devices for adjusting the working height to compensate for unevenness in the floor. Steel rollers. Foot switch. PRESS Plate size: 5,500 x 1,600 mm Loading side: 1,700 mm Stroke: from top to bottom Opening: 450 mm Cold press The plates are made of steel sheet and attached to a steel frame structure. Maximum pressing force: 160 tons. Specific pressure (on 100% of the area): 1.82 kg/cm2 Specific pressure (on 80% of the area): 2.27 kg/cm2 Pressure cylinder: 12 x 80 mm Auxiliary cylinders: 6 x 50/30 mm Power supply: 400 Volt EU/50 Hz/3 PH. + G AUTOMATIC LOADING and UNLOADING of the plates on the lower plate, on the 3,500 mm side. The transport is carried out via a motorized MYLAR belt. The belt is activated by 2 rollers, one of which is located at the entrance and one at the exit of the press. The rollers are driven by a motor with a chain that slides on special guides. The Mylar belt rotates around the lower plate, which rests on special side supports. The belt rotates on 2 rollers, which are located at the entrance and exit of the press. The ends of the MYLAR belt are attached to special rods with devices for tensioning the MYLAR. The upper plate is covered with a Mylar film. The press plates consist of thick steel sheets that are welded to the frame structure. HYDRAULIC UNIT with pump, oil tank and valves for operating the pressure cylinders and auxiliary cylinders that move the upper plate. The hydraulic control unit is located in the upper part of the press to facilitate maintenance. CONTROL PANEL with buttons and switches. Pressure control manometer on the front of the press. UNLOADING MOTORIZED ROLLER TABLE 2,000 x 1,600 mm The unloading table is located at the exit of the press for manual unloading of the pressed plates. Exit side from the press: 1,600 mm. Note: The loading table of the press with the dimensions 3,500 x 1,600 and the unloading table with the dimensions 2,000 x 1,600 are shorter than the press table with the dimensions 5,500 x 1,600, as the press was installed in a line. Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Condition: used, Veneer machine Manufacturer: Fischer & Rückle Type: FZR 21 Year of manufacture: 2015 For the most efficient edge gluing of parallel-connected veneer strips into continuous or component-specific veneer surfaces. The cut or rotary-cut veneers must be pre-glued with PVAc or UREA adhesives. This edge feeding joining apparatus is the most economical alternative to longitudinal joining apparatuses for cross-grain applications. Rodpfx Anszuzptoyecf Production Approx. 17-20 joints/min. Technical data Veneer strip lengths (grain direction): 350-2150 mm Veneer strip widths (cross-grain direction): 50-600 mm Veneer surface width (cross-grain direction): min. 260 mm Veneer strip thickness: 0.3-1.5 mm Equipment Feeding device for efficient and convenient semi-automatic feeding of veneer strips Panel Automatic for component-specific surfaces with pre-sorted components and a pre-selected number of veneer strips. Features - The Furnimaster-plus has a veneer alignment function (reverse transport movement) - Perfect joining of cut or rotary-cut veneer of all wood species, even with wavy or rippled veneer - Unique, proven horizontal pressing system that results in fully closed, strong glue joints - Solid, robust construction for high durability, reliable and fail-safe operation - Easy operation thanks to touchscreen panel, clear symbols, separate manometers with direct access, etc. - Liftable pressure bars for quick and easy access to the heating plates for cleaning - Few wear parts, low costs for service and maintenance Cross cutter For cutting to a pre-set format width (across the grain) directly after splicing. Short widths can be pre-set and measured with the integrated encoder. Larger widths are determined by two photoelectric sensors that are mounted at the required distance from the clipper on the direct stacking device. Direct stacking device DA-12R, belt system For unloading and stacking the veneer surface directly after joining. The joined surfaces are gently unloaded and stacked on this compact direct stacking device without any mechanical impact. Min. veneer sheet length (grain direction): 350 mm Veneer sheet widths (across the grain): 250 - 1200 mm Max. stack height: 500 mm Max. stack width (across the grain) for unloading to the rear end: 1200 mm Note: The technical data and descriptions are taken from the original order confirmation. The data is for informational purposes only and is not binding. Another Fischer & Rückle machine, type: FZR 21, year of manufacture: 2009, is also available.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Automatic CNC screen printing machine ASP-100LS/CD (K5) | Manufacturer: Oltronik MACHINE OFFERED: The ASP-100LS/CD machine is a professional, numerically controlled (CNC) device for multi-color screen printing on cylindrical, oval, and rectangular objects. It enables the execution of multi-color printing cycles (up to 5 colors simultaneously) with UV drying, both for cylindrical and flat printing. A PLC controller with a touchscreen provides precision, repeatability, and ease of programming. TECHNICAL DATA: Manufacturer: Oltronik | Model: ASP-100LS/CD (K5) Year of manufacture: 2005 | Operating hours: 156,865 cycles Control: CNC PLC with touchscreen Squeegee heads: 5 pcs. Drying: UV (for cylindrical and flat printing) Cylindrical printing: Ø32–Ø150 mm (printing height 145 mm) Redpezwdwrsfx Anyjcf Rectangular printing: 32×32 mm to 105×105 mm Oval printing: 32×32 to 150×150 mm Printing range (2 screens): 410 mm | (3 screens): 220 mm | (4 screens): 125 mm | (5 screens): 68 mm Max. external height of screen frames: 485 mm | Frame profile: 25×25 mm EQUIPMENT: Pneumatic system (air preparation station, manometers, loading cylinders, screen holding cylinders, and squeegee pressure cylinders), electrical system with a control cabinet, operator panel, start pedal, emergency stop button, protective housing. DOCUMENTATION: Complete technical and operating documentation from the manufacturer Oltronik (76 pages).

Condition: new, Year of construction: 2026, pressure 28 t stroke 180 mm table-size 300 x 550 mm diameter of piston 130 mm work speed min. 2 m/sec work speed max. 9,8 m/sec return speed 20 mm/sec Max. pressure 200 bar weight of the machine ca. 0,65 t total power requirement 4 kW Redpfx Asgvkmrjnyscf dimensions of the machine ca. 1,15 x 0,75 x 1,1 m • The horizontal bending and straightening press from Profi Press is a universal one Hydraulic press specially designed for performing bending, profiling and Straightening work is designed. The applications of the machine are different and depend on the accessories that are on the work table, the Tool holder and are installed in the holes and pin holes. • The HB-28 model is used for light bending measurements on the work table equipped with an angle scale, and the press can also be equipped with tools are supplied (for example block punching) that are placed on the tool holder Can be assembled, as well as tools that are in the holes and pin holes can be installed to carry out various types of work. • The hydraulic system can be adjusted with the help of the pressure and flow adjustment valves can be regulated, which is the pressing force and the speed of the press influence. The press is equipped with a built-in manometer. • The control panel is used to operate and display the piston stroke and for Choice between manual or automatic operation, and the HB-28 model is also with a built-in memory for up to 4 different programs fitted. • Operation is via electric foot pedals. • The Profi Press HB-28 model can be equipped with various optional accessories hearing parts and tools for installation on the workbench and the Tool holder to be delivered.

Condition: used, Year of construction: 2002, Cylindroconical stainless steel tank with glycol cooling for frame and cone, ventilation nozzle at the outlet and various fittings. Wall thicknesses: - Cone 3 mm - Frame 2 mm - Clamp bottom 3 mm Cone angle: 120° Roughness of cone interior < 0.35 µm Additional title: Vertical, cylindrical-conical, coolable stainless steel tank Volume: 4681 liter Working pressure tank: 0,99 bar Rcjdpfx Asztza Asnyjf Working presure double jacket: 0,9 bar Width: 2.3 m Height: 2.5 m Material: V2A stainless steel 1.4301 (AISI 304) Base construction: cylindroconical, opper bottom dished shell, on 3 cabinet legs one is 50mm shorter for a load cell Features: 3 cooling zones with volumes of 7 and 14 and 34 liters, coolant = glycol solution, connection size inlet (one each) DN 20, connection size outlet (one each) DN 25, sight glas DN100 mit halogen lamp,CIP head, air duct with sterile filter, standpipe, outlet pipe DN 65 with disc valve, manhole with lid, sampling tap, temperature sensor, load cell, Safety fitting consisting of over pressure pipe with valve, manometer and flap valve DN32

Condition: used, Year of construction: 1991, 2 vertical stainless steel tanks with dished bottoms, shell cooling zone, manhole, sampling tap, insulation and central outlet. Additional title: 2 insulated, coolable tanks Volume: 44361 l Operating pressure: 0,9 bar Operating temperature: 20 °C Material: stainless steel Position: vertical Base construction: cylindrical tank with dished bottoms, placed an 4 square tube feet Features: insulated, covered, 1 cooling zone (183 l, 0.9 bar), manhole, safety valve, CIP pipe with spray head, manometer, yeast plug Redpjztya Ujfx Anyscf Periphery: own temperature control

Condition: used, Year of construction: 1991, 2 vertical stainless steel tanks with dished bottoms, shell cooling zone, manhole, sampling tap, insulation and central outlet. Additional title: 2 insulated, coolable tanks Volume: 44916 l Operating pressure: 0,9 bar Operating temperature: 20 °C Width: approx. 4650 mm Height: approx. 4130 mm Weight: 5000 kg Material: stainless steel Position: vertical Base construction: cylindrical tank with dished bottoms, placed an 4 square tube feet Rcedpfx Aoztya Ionyof Features: insulated, covered, 1 cooling zone (183 l, 0.9 bar), manhole, safety valve, vacuum valve, CIP line with spray head, manometer, yeast plug Periphery: own temperature control