Used Mill Turn for sale (16,558)

Condition: used, Year of construction: 2006, turning length: 1,298 mm, turning diameter: 356 mm, spindle speed (max.): 4,000 rpm, controller model: MORI SEIKI MSX 850III / MAPPS III, center width: 1,250 mm, TECHNICAL DETAILS Maximum turning diameter: 1,250 mm Maximum turning length: 1,298 mm Maximum turning diameter: 356 mm Standard turning diameter: 275 mm Swinging diameter over bed: 923 mm X-axis travel: 260 mm Z-axis travel: 1,345 mm Maximum spindle speed: 4,000 rpm Kdjdjzwgquepfx Adlst Spindle bore: approx. 80 mm Number of turrets: 1 Number of tool positions: 12 MACHINE DETAILS Control system: MORI SEIKI MSX 850III / MAPPS III Dimensions & Weight Dimensions (L x W x H): 5,000 × 2,300 × 2,400 mm Machine weight: 7,600 kg EQUIPMENT IRCO SIMAG loader magazine Chip conveyor Powered tools C-axis Y-axis

Condition: used, Year of construction: 2005, turning length: 705 mm, turning diameter: 356 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 795 mm, controller model: MORI SEIKI MSX-850, TECHNICAL DETAILS Turning diameter: max. 356 mm Standard turning diameter: 275 mm Kjdpfx Adozwgwzjlodt Turning length: max. 705 mm Travel in X-axis: 260 mm Travel in Y-axis: ±50 mm Total travel in Y-axis: approx. 100 mm Travel in Z-axis: approx. 795 mm Rapid traverse rate X/Y/Z: 30 m/min Tool stations: 12 MACHINE DETAILS Design: SY with Y-axis Control system: MORI SEIKI MSX-850 Bar feed magazine: LNS Quick Load Servo 2 Bar length: max. approx. 1,500–1,600 mm / 63″ EQUIPMENT Tailstock Driven tools Y-axis LNS Quick Load Servo 2 bar feed magazine

Condition: ready for operation (used), Year of construction: 2020, operating hours: 7,597 h, functionality: fully functional, machine/vehicle number: NL257200651, turning diameter: 366 mm, spindle speed (max.): 4,000 rpm, controller model: Mitsubishi 730UM CELOS, working length: 700 mm, number of slots in tool magazine: 12, TECHNICAL DETAILS Maximum machining length: approx. 700 mm Kjdpfx Aszy Hx Dedljdt Maximum turning diameter: 366 mm Workpiece length with tailstock: max. 728 mm Spindle speed: max. 4,000 rpm Tool turret: 12-position BMT60 star turret Tool drive: 40 / 14 Nm Speed of driven tools: max. 10,000 rpm Overhang length of driven tools: 100 mm Chuck: 10" hollow chuck, Ø 254 mm Chuck cylinder: hollow chuck cylinder BB210A821 Tailstock: NC tailstock Tailstock taper: MK 5 MACHINE DETAILS Coolant type: water-miscible coolant / emulsion Coolant pressure: 5 bar Extraction connection: Ø 150 mm Mains voltage: 380 V Frequency: 50 Hz Transformer power: 45 kVA Phases: 3 phases Isolation transformer: 400 V ± 5 % Current: 65 A Control system: Mitsubishi 730UM CELOS User interface: CELOS with ERGOline touch panel Machine operating time: 7,597 h Program runtime: 2,138 h Last maintenance: April 2024 Weight: 5,800 kg EQUIPMENT DMG MORI M730UM control system with CELOS ERGOline touch panel 12-position BMT60 star turret with driven tools 10" hollow chuck, Ø 254 mm Hollow chuck cylinder BB210A821 Double foot switch with protective cover NC tailstock with MK-5 mount Oil-air cooler for circulating spindle coolant Hinged belt chip conveyor High-pressure coolant system, 5 bar Oil mist separator AFS 1100 including interface Manual, swiveling tool pre-setter SCHNEIDER transformer 45 kVA Technology cycle "Alternating Speed" Further technical data can be found in the document attached!

Condition: used, Year of construction: 2018, operating hours: 28,500 h, functionality: fully functional, machine/vehicle number: AT0980, turning length: 650 mm, turning diameter over cross slide: 400 mm, turning diameter: 400 mm, spindle motor power: 21 W, spindle speed (max.): 4,000 rpm, spindle bore: 65 mm, travel distance X-axis: 275 mm, travel distance Y-axis: 90 mm, travel distance Z-axis: 700 mm, mount diameter: 250 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 24 m/min, rotational speed (max.): 6,000 rpm, type of input current: three-phase, feed length X-axis: 275 mm, feed length Y-axis: 90 mm, feed length Z-axis: 700 mm, torque: 258 Nm, bar passage: 65 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 24 m/min, total height: 2,500 mm, total length: 2,800 mm, chuck outer diameter: 250 mm, total width: 1,600 mm, bar diameter (max.): 65 mm, spindle nose: A8/DIN, swing diameter over bed slide: 600 mm, overall weight: 6,000 kg, swing diameter over top slide: 400 mm, spindle diameter: 65 mm, turning diameter over bed slide: 400 mm, Equipment: documentation/manual, CNC Turning Center SPINNER TC600 65SMCY with Bar Feeder SPINNER TC600 65SMCY CNC turning center, manufactured in 2018, equipped with a Siemens SINUMERIK 840D sl control. The machine is suitable for complex turning operations and serial production. It is equipped with a Y-axis, sub-spindle, driven tools, chip conveyor, and parts catcher. Machine details • Manufacturer: SPINNER • Model: TC600 65SMCY • Year of manufacture: 2018 • Serial number: AT0980 • Control: Siemens SINUMERIK 840D sl • Power supply: 400 V, 50/60 Hz • Maximum swing diameter: approx. 600 mm • Maximum turning diameter: approx. 400 mm • Maximum turning length: approx. 650 mm • Axis travel: X 275 mm / Y +50 to −40 mm / Z 700 mm Kdedpfxjzm Rrze Adlst • Rapid traverse X/Y/Z: 15 / 15 / 24 m/min Main spindle • Maximum spindle speed: 4.000 rpm • Spindle nose: A8/DIN • Chuck size: 250 mm • Spindle power: 21/27 kW • Torque: 201/258 Nm Sub-spindle • Maximum spindle speed: 6.000 rpm • Chuck size: 165 mm • Power: 10/12 kW • Torque: 64/76 Nm Turret and driven tools • Up to 16 tool positions • Driven tool speed: up to 6,000 rpm • Driven tool power: 2.3/4.5 kW • Driven tool torque: 5/10 Nm Included equipment • Chip conveyor • Parts catcher • Tool holders shown in the photos Included driven tool holders: 8 • 3 radial driven tool holders • 5 axial driven tool holders • 2 of the axial holders are double-sided Bar feeder The machine is sold together with a Breuning IRCO ILS-SSL 70 bar feeder. • Manufacturer: Breuning IRCO • Model: ILS-SSL 70 • Type: SSL-7012-III • Year of manufacture: 2018 • Voltage: 200–500 V • Power: 1 kVA • Weight: 500 kg Operating hours • Main spindle operating hours: approx. 9.300 h • Sub-spindle operating hours: approx. 3.300 h • Total machine power-on hours: approx. 28.500 h It is connected and available for inspection and testing by prior arrangement. The machine is available immediately.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 100418005, travel distance X-axis: 1,500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 590 mm, feed length X-axis: 30,000 mm, feed length Y-axis: 30,000 mm, feed length Z-axis: 30,000 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, mount diameter: 63 mm, total length: 9,485 mm, table length: 1,000 mm, total width: 4,609 mm, spindle speed (max.): 10,000 rpm, total height: 2,896 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, type of input current: three-phase, table load: 300 kg, position of the milling head: Horizontal / Swiveling, workpiece weight (max.): 300 kg, torque: 136 Nm, rotational speed (min.): 3,800 rpm, rotational speed (max.): 16,000 rpm, overall weight: 18,000 kg, working range: 1,000 mm, spindle nose: HSK-A63, tool weight: 6 g, grinding spindle motor power: 54,000 W, spindle motor power: 54,000 W, Equipment: rotational speed infinitely variable, Zero hours HSTM 1000HD 5-Axis Turn-Milling Center Was not used in production / just OEM commissioning and preserved. Basic machine HSTM 1000HD X, Y, Z axis with absolute linear scale A axis Swivel axis / B axis C axis Pressure control of head clamping CNC-control system SIEMENS 840D SL Remote diagnosis system via Ethernet Patrol light Control cabinet with air-condition Milling spindle 16’000 rpm, HSK-A63 Machining hour counter Tool handling system with double gripper Chill unit Hydraulic unit Machine housing with front door L shape Standard machine color scheme Coolant supply unit, low pressure, paper belt filter Flush Gun Chip conveyor Oil Mist exhaust system Documentation 1-fold in English + CD Kdsdpfx Aszvuu Sedlot Machine option package Minimum quantity lubrication system High pressure cooling through spindle BEMA automatic adjustable coolant nozzles Tool measuring system BLUM Work piece measuring system BLUM 3D Probe Rotoclear window Handweel HT 2 Automatic operator doors CAD / CAM Software package “ Hamuel Single Blade” CSE Siemens simulation Transportation and lifting tool set Commissioning tool set Geometrical measurement set Available in Bangkok, Thailand Worldwide shipping

Condition: excellent (used), Year of construction: 2009, operating hours: 87,000 h, functionality: fully functional, turning length: 600 mm, turning diameter over cross slide: 410 mm, spindle speed (min.): 22,000 rpm, For sale is a CNC turning center from the manufacturer DMG, type CTX beta 800, built in 2009. Available immediately. The machine is in good condition and fully functional. Technically sound and ready for immediate use. Technical data: Kdjdpfoyq Hq Nex Adlst Machine type: CNC turning center Manufacturer: DMG Type: CTX beta 800 Year of manufacture: 2009 Control: Heidenhain 4290 Max. turning length: 600 mm Tool turret: 12-position Tool holder: VDI 40 Operating hours: approx. 87,000 h Spindle hours: approx. 22,000 h Linear guide Z1 recently renewed Turret drive S2 recently replaced Machine regularly serviced by customer support technically sound and fully functional Inspection under power possible by arrangement Service and maintenance reports available large accessory package powered tools from WTO further documentation and images available upon request If interested, please write or call. Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg

Condition: ready for operation (used), Year of construction: 2005, operating hours: 10,223 h, functionality: fully functional, machine/vehicle number: 1278R18TBF, turning length: 720 mm, turning diameter over cross slide: 530 mm, turning diameter: 320 mm, spindle speed (max.): 4,000 rpm, spindle bore: 65 mm, travel distance X-axis: 270 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 720 mm, bar passage: 65 mm, total height: 2,100 mm, total length: 4,300 mm, total width: 2,000 mm, overall weight: 4,200 kg, number of tool stations in tool turret 3: 12, Due to business closure, an AMV Angelini Oscar turning machine with a Y-axis and counter-spindle is being sold. The machine is very well-equipped – with chucks for the main and counter-spindle, collet chucks (Hainbuch) for the main and counter-spindle, a parts catcher, and prepared for a bar feeder; it also includes a chip conveyor. High-pressure pump, 12 driven tool stations VDI30. Kdjdpjy S R Atofx Adlst Control system: Fanuc 21 I-TB series. A large number of accessories are included, such as turning tool holders and driven tools. The machine is still powered and can be inspected by appointment.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning diameter: 20 mm, spindle motor power: 5,500 W, spindle speed (max.): 8,000 rpm, spindle bore: 25 mm, travel distance X-axis: 50 mm, travel distance Y-axis: 350 mm, type of input current: three-phase, bar passage: 20 mm, overall weight: 4,200 kg, spindle diameter: 20 mm, Equipment: documentation/manual, rotational speed infinitely variable, Steuerung: Fanuc 310i Hauptspindel Drehzahl: 10.000 U/min Leistung: 5,5 kW Drehmoment: 14 Nm Stangendurchlass: max. 20 mm C1-Achse: 0,001 Verfahrweg Z1-Achse: 80 mm Gegenspindel Bjjgsn8yaky Drehzahl: 10.000 U/min Leistung: 5,5 kW Drehmoment: 14 Nm C2-Achse: 0,001 Verfahrwege X2 / Z2-Achse: 240 / 300 mm Eilgang in X2 / Z2 Achse: 40 m/min Werkzeugträger I (X/Y) Technologie: Linearer Schlitten Innenbearbeitung: 6 Stationen Werkzeughalter: 20 mm Außenbearbeitung: 6 Stationen Werkzeughalter: 12 x 12 mm Angetriebene Werkzeugstationen: 5 Werkzeugantrieb: 3.450 / 6.000 U/min Werkzeugaufnahme: Spannzangenfutter, ESX 16 Verfahrwege in X/Y-Achse: 50/350 mm Eilgang in der X/Y-Achse: 40/30 m/min Stangenlader BOSS 332 E Werkzeugträger II (Y) Technologie: Linearer Schlitten Innenbearbeitung: 4 Stationen Kdodjzz I Dkopfx Adlot Werkzeugaufnahme: 20 mm Außenbearbeitung: 4 Stationen Werkzeughalter: 12 x 12 mm Angetriebene Werkzeugstationen: 5 Werkzeugantrieb: 3.450 / 6.000 U/min Werkzeugaufnahme: Spannzange, ESX 16 Verfahrweg in Y2-Achse: 120 mm Eilgang in der Y2-Achse: 40 m/min DETAILS ZUR MASCHINE Gewicht: 4200 kg Angeschlossene Last: 30 kVA Betriebsspannung: 400 V / 50 Hz AUSRÜSTUNG Spänemanagement: Späneförderer Kühlmittelmanagement: Kühlmittelpumpe Weitere Ausstattung: Signallamp

Condition: good (used), Year of construction: 2007, operating hours: 49,000 h, functionality: fully functional, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales. Kjdpfx Aoxdih Nodledt

Condition: excellent (used), Year of construction: 2014, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 256316, turning length: 1,000 mm, turning diameter: 730 mm, spindle motor power: 18,500 W, spindle speed (min.): 35 rpm, spindle speed (max.): 12,000 rpm, travel distance X-axis: 1,100 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 50,000 m/min, rapid traverse Y-axis: 50,000 m/min, rapid traverse Z-axis: 50,000 m/min, rotational speed (max.): 1,000 rpm, rotational speed (min.): 35 rpm, type of input current: three-phase, torque: 160 Nm, workpiece weight (max.): 680 kg, spindle nose: Cône 7/24, N°40, table load: 880 kg, number of slots in tool magazine: 120, pallet changer: automatic, Equipment: CE marking, chip conveyor, documentation/manual, Secondhand Mazal Integrex i500V Kedpfx Adsyymrmsledt

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 63284-0012, turning length: 650 mm, turning diameter: 300 mm, spindle motor power: 15 W, spindle speed (max.): 5,000 rpm, spindle bore: 76 mm, travel distance X-axis: 215 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 680 mm, milling spindle length: 6,000 mm, type of input current: three-phase, bar passage: 65 mm, total height: 1,920 mm, total length: 3,130 mm, total width: 1,710 mm, spindle nose: A2-6, overall weight: 4,500 kg, Equipment: documentation/manual, MACHINE INFORMATION Manufacturer: Hyundai Model: KIA SKT2100SY Year: 2009 Condition: (Used) Great Serial Number: 63284-0012 Control: Fanuc Control Accessories: LNS Barfeed, Live & Static Tool holders, Swarf Conveyor, Parts Catcher, Tool Probe. Location: COVENTRY, UNITED KINGDOM MACHINE SPECIFICATIONS Control: Fanuc Control Bar Capacity: 65mm Chuck Size: 8″ Main, 6″ Sub Max Cutting Diameter: 300mm Max Cutting Length: 650mm Spindle Speed: 5000rpm Turret Positions: 12 Kodpfxezwhp So Adljdt Milling Speed: 6,000rpm Swing: 820mm X Axis Travel: 215mm Y Axis Travel: 110mm total (+55mm) Z Axis Travel: 680mm C Axis Travel: 0.001 degree

Condition: ready for operation (used), Year of construction: 2011, operating hours: 22,000 h, functionality: fully functional, Miyano BX-26S CNC Lathe – Double Spindle with Driven Tools TECHNICAL SPECIFICATIONS: Machining Capacities: - Maximum diameter: Ø 26 mm - Maximum working length: 67 mm (max. 250 mm) - Distance between centers: 330 mm - Bar capacity: Ø 28 mm Spindle System: - Configuration: Twin spindle (L-SP + R-SP) - Variable speed: 80 – 8,000 rpm - Both spindles feature identical specifications Tool System: - 2 linear turret-type tool slides - Slide No.1: 18 tool stations - Slide No.2: 7 tool stations - Total: 25 tool positions - Integrated driven tools - Drilling capacity: Ø 12 mm - Tapping capacity: M8 Performance: - Rapid traverse: 24 m/min (all axes) - Travels X1/Y1: 135/260 mm - Travels X2/Y2: 180/238 mm - Travels Z1/Z2: 70/238 mm Kdedpfx Adjxcp I Hjljt - Maximum push force: 3,325 N KEY FEATURES: ✓ High-precision Japanese Miyano technology ✓ Double spindle for maximum productivity ✓ Ideal for series production ✓ Integrated driven tools for complete machining operations ✓ Perfect for small to medium-sized precision components ✓ Excellent for bar stock machining Ideal applications: Precision components, special fasteners, automotive parts, connectors, electronic components, medical parts. A perfect machine for workshops seeking high productivity and precision in the machining of complex, small-sized components.

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 00820002981, turning length: 800 mm, turning diameter: 500 mm, spindle speed (max.): 3,600 rpm, spindle bore: 118 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 30 m/min, bar passage: 102 mm, total height: 2,500 mm, total length: 8,000 mm, total width: 2,400 mm, overall weight: 10,000 kg, controller manufacturer: DMG, controller model: ERGOLINE, input voltage: 400 V, input frequency: 50 Hz, input current: 125 A, nominal power (apparent): 74 kVA, operating hours of spindle: 4,439 h, Equipment: chip conveyor, DMG MORI CTX BETA 800 TC CNC turning and milling center - Note: the spindle hours may increase slightly! - Swing diameter: 500 mm - Distance between centers: 1020 mm - Max. workpiece weight (chuck parts/chuck weight): 100 kg Kjdpfxszxx Dcs Adlsdt - Max. workpiece center of gravity from spindle flange: 120 mm - Travel X1: from -10 to 490 mm - Travel Y1: +-100 mm - Travel Z1: 845 mm - Travel Z2: 600 mm - Travel Z3: 800 mm - Spindle flange diameter: 220 H 5 mm - Chuck diameter: 315 mm - Diameter of front bearing: 160 mm - Rapid traverse speed, Z-axis: 40 m/min - Resolution, Z-axis: 0.001 mmm - B-axis max. swivel speed: 70 rpm - Angular resolution: 0.001° - Tailstock travel: 800 mm - Quill force: 8 kN The machine is equipped with a tailstock and a three-jaw chuck, diameter: 250 mm, as well as a chip conveyor and coolant system. FCA D-63843 Niedernberg - loaded onto a truck.

Condition: ready for operation (used), Year of construction: 1994, TRAUB TNS 65 D / 5-axis CNC turning-milling center TX8D -TX 8D control system -COMPLETE TECHNICAL DATA – SEE PHOTOS -Year of manufacture: 1994 -Hydrobar tool magazine -Tailstock -Various powered tool holders -Three-jaw chuck -Tool holder -Complete documentation Kjdpfx Aszpf I Aodlsdt Errors and omissions excepted.

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 00500000321, turning length: 2,000 mm, turning diameter: 630 mm, spindle speed (max.): 4,000 rpm, spindle bore: 118 mm, travel distance X-axis: 650 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 2,050 mm, total height: 3,500 mm, total length: 10,000 mm, total width: 5,000 mm, overall weight: 20,000 kg, controller manufacturer: DMG, controller model: ERGOLINE, input voltage: 400 V, input frequency: 50 Hz, input current: 160 A, nominal power (apparent): 110 kVA, operating hours of spindle: 14,700 h, Equipment: chip conveyor, DMG CTX GAMMA 2000 TC CNC Turning and Milling Center - Please note: the spindle operating hours may increase slightly! - Swing diameter: 630 mm - Distance between centers: 2260 mm - Max. workpiece weight (chuck jaws/chuck weight): 250/150 kg - Max. workpiece center of gravity from the spindle flange: 250 mm - Travel range B1: 240° - Travel range Z2: 1910 mm - Travel range Z3: 1910 mm - Steady rest clamping range DW: 45 - 310 mm, weight: 152 kg - Steady rest width C: 145 mm - Spindle flange diameter: 220 H 5 mm - Chuck diameter: 500 mm - Bar diameter: 102 mm - Diameter of the front bearing: 160 mm - Tool holder: HSK 63 A - Includes a 36-position tool changer The machine is equipped with a tailstock, an automatic steady rest from SMW AUTOBLOK, and a three-jaw chuck from SMW, diameter: 300 mm. It also includes additional jaws, another chuck, a chip conveyor, and a coolant system. Please note: the machine can be transported on a truck with a width of up to 3000 mm. FCA D-63843 Niedernberg - loaded onto a truck. Kdjdpfezxxhhex Adljt

Condition: used, Year of construction: 2008, operating hours: 82,646 h, functionality: fully functional, Dismantling, loading, and transport are the responsibility of the buyer. Sale excludes extraction equipment. Sale excludes tools and attachments. Kjdozzvvuopfx Adlsdt Sale is limited to within the EU.

Condition: good (used), MAZAK Lathe Model: QTN 350 MY X 1500 Kjdpfx Asz Apkbedlsdt Year: 2008 Control Unit: MATRIX Maximum Turning Diameter (capacity): 720 Machinable Diameter / Standard Machinable Diameter (capacity): 420 Maximum Machinable Length*1 (capacity): 1500 mm Bar Capacity (capacity): 102 Centering Dimensions (main spindle): 315 Spindle Speed (main spindle): 3300 Spindle Nose (main spindle): ASA 11 Spindle Bore (main spindle): 112 Spindle Speed (powered tool spindle): 4000 Travel (tailstock): 1550 Taper (tailstock): CM 5 Main Spindle Motor (continuous / 40% duty) (motors): 37 Kw Coolant Tank (coolant): 400 l

Condition: used, Year of construction: 1989, functionality: fully functional, overall weight: 5,000 kg, We offer this used Mazak ST 35 ATC MC CNC turning and milling center, manufactured in 1989. CNC lathe, brand MAZAK, model ST 35, manufactured in 1989, self-weight of 5 tons, equipped with a MAZATROL model T32-3 control, a KITAGAWA brand chuck, model B-12A0815 with a maximum pressure of 327 PSI, a KITAGAWA brand hydraulic cylinder, model F2078HS15A with a maximum speed of 3,000 rpm, as well as an automatic chip removal system, all accompanied by various manuals. Voltage: 220 V Frequency: 60 Hz Spindle power (rated): 26 hp Spindle power (continuous): 30 hp Machine serial number: 83298 Electrical diagram number: 112AAWA Main motor current: 102 A Full load current: 44 A Main switch current: 13/10 A Model: ST 35 ATC MC Serial number: 83496 Date of manufacture: June 1989 Weight: 5000 kg If you have any questions or need more information, please do not hesitate to send us a message or call us. Kdodpfx Adjz A Inceljt

Condition: used, Year of construction: 2005, functionality: fully functional, turning length: 1,500 mm, spindle speed (max.): 4,000 rpm, rotational speed (max.): 4,000 rpm, overall weight: 14,400 kg, Mazak Integrex 300 3 ST Control -Mazatrol 640 mt pro 2 Spindles 1500mm No CE Kdjdpfx Asx Rkvqedljt 2005/05 in very good condition Turret lathe.....10 tool ATC.....40 tool Maximum Swing 33.5″ 850.9 mm Maximum Swing (Y-axis use) 26″ – 33.5″ 660.4 mm – 850.9 mm Maximum Swing over Cross Slide 33.5″ 850.9 mm Maximum Swing over Lower Turret 16.5″ 419.1 mm Located in Israel under power and ready for inspect . This CNC made in Japan and definitely needs a permit of MATI

Year of construction: 2011, operating hours: 45,000 h, condition: good (used), functionality: fully functional, travel distance X-axis: 410 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 805 mm, spindle diameter: 150 mm, spindle bore: 51 mm, spindle speed (max.): 5,000 rpm, MAZAK INTEGREX 100 IV ST multitasking center Year 2011 Control unit: Matrix Maximum workable length: 753 mm Maximum workable diameter: 545 mm Bar diameter: 51 mm Main spindle diameter: 200 mm, 2-jaw chuck Main spindle power and speed: 11 KW, 5000 rpm C-axis: 360° Counter-spindle diameter: 200 mm, 2-jaw chuck, self-centering Counter-spindle power and speed: 11 KW, 5000 rpm C-axis on counter-spindle: 555 X-axis travel: 410 Y-axis travel: 140 Z-axis travel: 805 B-axis travel: 225° Milling spindle power: 5.5 KW Milling spindle speed: 12,000 rpm Spindle mounting: CAPTO C6 Maximum tool storage capacity: 40 tools Lower turret: 9 positions, CAPTO High-pressure system through the spindle: 20 BAR Chip conveyor: belt type Automatic door Kdodpfx Aezz Rxwodlot Robot interface

Condition: excellent (used), functionality: fully functional, X = 1020 mm Y = 510 mm Z = 460 mm Kdedpfx Aoz Ap R Uodlot ATC 30 Table size: 1200 x 500 mm Machine dimensions: 3000 x 2800 x 2800 mm Machine weight: 7,300 kg

Condition: excellent (used), Year of construction: 2015, operating hours: 9,564 h, functionality: fully functional, CNC FANUC 31i-MODEL B5 Kodpfjwayv Eex Adlsdt TOOL PRESETS N. 2 SELF-CENTERING N. 7 HSK TOOLS

Condition: ready for operation (used), Year of construction: 2019, operating hours: 12,055 h, functionality: fully functional, turning length: 760 mm, turning diameter: 420 mm, spindle motor power: 37,000 W, spindle speed (max.): 3,000 rpm, spindle bore: 102 mm, travel distance X-axis: 265 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 830 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, bar passage: 102 mm, overall weight: 6,900 kg, The Hyundai WIA L3000SY represents the flagship model in Hyundai WIA’s turning center lineup, designed for high precision machining, productivity, and long-term reliability. The machine is equipped with true direct-drive spindles (without belts), ensuring excellent torque transmission, high dynamic performance, and improved machining accuracy. Key technical features include: • Main spindle: 12” chuck with 37KW Kdjdpoy T Iuiefx Adljt • Sub spindle: 6” chuck • True Direct Drive spindles (belt-free design for higher precision and reliability) • BMT65 turret with 24 positions and 12 driven tool stations • Driven tools: up to 5,000 rpm with 7.5 kW power • Through-tool coolant system – 15 bar • Gun coolant system • Digital scales for improved machining precision • Pneumatic part pusher through the sub-spindle, including part flushing with M code • Part catcher on both main and sub spindle • Part extraction conveyor • Bar feeder connection • Bore-Max bar capacity: Ø102 mm • Chip conveyor • Automatic Q-Setter tool measuring system • Latest generation FANUC control • Oil mist / emulsion extraction unit with the machine • Hainbuch main spindle chuck The machine was installed at the customer site in 2020 and has been used only lightly. The current owner is changing production profile, which is why the machine has become available. This configuration offers an excellent opportunity to acquire a high-end multi-tasking turning center with very strong specifications and low operating hours. Machine has regular Maintenance done and machine is working! With box guide design – the most rigid solution used in turning centers.

Condition: used, Year of construction: 2004, operating hours: 11,022 h, functionality: fully functional, machine/vehicle number: 07520000211, turning length: 1,070 mm, turning diameter over cross slide: 400 mm, turning diameter: 560 mm, spindle motor power: 37 W, spindle speed (max.): 4,000 rpm, spindle bore: 79 mm, travel distance X-axis: 485 mm, travel distance Y-axis: 160 mm, rotational speed (max.): 12,000 rpm, Equipment: rotational speed infinitely variable, Gildemeister GMX 200 Linear with tailstock and steady rest for sale. Included are a coolant treatment system and a quality selection of tools HSK 63 - A, approximately 40 tools. Also included is a Berg chuck, see photos. The machine is being sold due to lack of orders. 49,700 power-on hours, 11,022 spindle hours. The machine can be inspected and tested at any time. Loading is possible without any issues. Ksdpfxsug Uc Ns Adlsdt

Condition: repair required (used), Year of construction: 2019, functionality: fully functional, In operational condition: MAXMILL NVM1166 - HISION VMU1100 - HISION V180 Kdsdpfsy Iyw Sjx Adljt