Used Infeed for sale (2,068)

Condition: ready for operation (used), Year of construction: 2005, machine/vehicle number: 0-261-07-1735, functionality: fully functional, operating hours: 4,600 h, input voltage: 400 V, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 12 mm, height adjustment type: electric, feed rate X-axis: 14 m/min, total height: 2,100 mm, total length: 6,900 mm, total width: 1,200 mm, overall weight: 3,500 kg, Equipment: documentation/manual, Name: BRANDT KDF 670 Highflex – edge banding machine Manufacturer: BRANDT Type: KDF 670 Highflex Year of manufacture: 2005 Machine available from: 2026-11-20 Machine condition: good Location: Kielce, Poland Technical data: Edge thickness: 0.4 - 12 mm Workpiece thickness: 8 - 60 mm Feed rate: 14 m/min Pre-milling unit: 2 x 2.2 KW Gluing unit: Quickmelt Edge magazine: for 1 roll Trimming unit: 2 x 0.35 KW Rough milling unit: 2 x 0.55 KW Profile milling unit: 2 x 0.55 KW Corner milling unit (copying): 2 x 0.35 KW Flat scraper (glue scraper): yes Radius scraper (profile scraper): yes Polisher: yes Control: PC16 Total power approx.: 15 KW Overall dimensions approx. (L x W x H): 6900 x 1150 x 2050 mm Weight approx.: 3500 kg Features: Software-controlled adjustment of the infeed fence Extension of the infeed fence by 300 mm Motorized adjustment of the upper pressure roller height Software-controlled adjustment of the pressure zone Automatic edge feeding Anti-adhesive spray Pneumatic adjustment for trimming at an angle/straight Pneumatic adjustment of the milling unit Software-controlled adjustment for edge thickness Lodpfx Alj Adzmzjyjah The machine has operated for very few hours – approximately 4600 (the computer disk was replaced after 2600 operating hours)

Year of construction: 2016, condition: used, Shrink film packaging line Manufacturer: LCR Group Year of manufacture: 2016 Packaging line consisting of: Infeed table 3000 x 1800 x 880 mm Film station with film cutting 1000 x 3000 x 2150 Buffer conveyor table 5500 x 1500 x 880 mm Side sealing and trimming of excess film 1200 x 3000 x 1300 Shrink tunnel 4600 x 2300 x 1900 Outfeed table 3000 x 1800 x 880 Note: Vacuum lifters at the infeed/outfeed are available as an option for an additional charge. Laedpfxj Ad If Re Alyoh Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, operating hours: 5,000 h, pressing force: 200 t, table width: 1,400 mm, table length: 3,200 mm, total length: 3,200 mm, total width: 1,400 mm, total height: 2,900 mm, overall weight: 23,000 kg, operating temperature: 200 °C, workpiece height (max.): 150 mm, temperature: 210 °C, For sale is a virtually new veneer press with an infeed/outfeed table from the German manufacturer Wemhöner, model KTV1E (serial number 1645, year of manufacture 1992). The machine is in excellent condition and has seen very little use. Machine type: Continuous press Manufacturer: Wemhöner Type: KTV1E Serial number: 1645 Selecta Year of manufacture: 1992 Location: 57223 Kreuztal Lodpfxownpcde Alysah Available: immediately Technical data Press length: 3200 mm Press width: 1400 mm Heating plates: yes Heating medium: oil Infeed: yes Conveyor belt: 3200 x 1900 mm Outfeed belt: 3200 x 1900 mm Press area: 3200 x 1450 mm Clearance height: approx. 100 mm Preheating temperature: 200° Heating capacity: 45 kW Heating medium: oil Pressing force: 200 tons The press machine is in top condition, has seen very little use, and has been used exclusively for development projects for the past 15 years. I would be happy to send you more information and pictures upon request. The machine is available immediately and can be inspected at any time by appointment. Self-collection only! Functional video available upon request. If you are interested, I am happy to provide you with further information or arrange a viewing!

Condition: used, operating hours: 19,216 h, total width: 2,300 mm, total height: 2,400 mm, total length: 2,420 mm, Year of manufacture: 1998 Colour: White Empty weight: 2.000 kg - Year: 1998 - CE marking present: Yes - Serial number: 98055541 - Operating hours: 19216 - Number of units [pcs]: 3 - └ Unit 1: - - Position: Right - - Type of unit: Contact roller - - Sanding belt length [mm]: 1900 - - Sanding belt width [mm]: 1300 - - Roller diameter [mm]: 250 - - Roller material: Rubber Ledj Aazaaepfx Alysah - - Motor power [kW]: 18.5 - └ Unit 2: - - Position: Right - - Type of unit: Contact roller - - Sanding belt length [mm]: 1900 - - Sanding belt width [mm]: 1300 - - Roller diameter [mm]: 170 - - Roller material: Rubber - - Motor power [kW]: 15 - └ Unit 3: - - Position: Top - - Type of unit: Texturing brush - - Roller diameter [mm]: 140 - - Motor power [kW]: 0.55 - Max. working width [mm]: 1300 - Min. working height [mm]: 2 - Max. working height [mm]: 165 - Infeed table length [mm]: 120 - Outfeed table length [mm]: 800 - Feed motor [kW]: 1.5 - Feed speed: Manual - Min. feed speed [m/min]: 5 - Max. feed speed [m/min]: 25 - Feed speed control: Continuously adjustable - Voltage [V]: 400 - Current consumption [A]: 35 - Fuse [A]: 63 - Power [kW]: 37.0 - Transport dimensions: 2420mm x 2300mm x 2400mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2022, functionality: fully functional, Used horizontal ZENZ block bandsaw line, type BN 110 S, with complete conveying system, stationary. Automatic infeed system with log feed-in device, control panel for the block bandsaw, with cutting program and conveying system for the removal of cut material, including a sorting conveyor. Year of manufacture: 2007; general overhaul in 2022 Conveying system year of manufacture: 2022 Manufacturer's number: 141-8300 Equipment: • 22kW drive motor • 7m cutting length • 5 vertical supports • 2 log turners (+2 holders) • Log lifting preparation with frame • 4 leveling supports with clamps (+2 holders) • 1 log roller Laode Adr Uvjpfx Alysh • 1 new pre-cutter • PLC control including cutting program • Seat mounted on armrests • PLC on the left - joystick on the right • 1 Zenz sharpening machine, type AHB (factory number: S-1012) • 4 bandsaw blades 6000x100x1.1 stellite for softwood (prod. no.: AB 0) • 4 bandsaw blades 6000x100x1.1 stellite for hardwood (prod. no.: AB 0) • Water lubrication system with 20l tank and nozzle o Mounted on the blade guide • Log lifting system o With 3 log lifting arms o With 2 cylinders • Log lifting preparation in the frame o With control unit o Holder for pipe o Two holders for cylinders • Ejector, hydraulically operated, for 820mm frame • Green laser indicator, horizontal Mechanization consisting of: • Folding frame, hydraulically operated, for removal at the saw with electrically driven roller conveyor • Electrically driven roller conveyor with hydraulic ejectors o Both roller conveyors run simultaneously • Roller conveyor, 4m long, slightly inclined with stop o All electrical and hydraulic elements can be operated from the control panel The block bandsaw, including the conveying system, is fully operational. If required, we can provide support with dismantling and assembly.

Year of construction: 2018, condition: used, 2018 Kronen KUJ cube, strip and slice cutting machine – used Cube, strip and slice cutting machine with infeed conveyor for vegetable and fruit processing. Lsdpfxoz H Ax Do Alyjah This KUJ is a used cutting machine from Kronen, built in 2018 in Kehl, Germany. It cuts cubes, strips and slices and is made of stainless steel. An inclined cleated infeed conveyor with a wide loading hopper carries the product up to the cutting unit. The cutting unit stands on swivel castors, so it can be moved between workstations, while the conveyor rests on adjustable feet. An emergency stop is fitted at the side of the conveyor. Located in Emmeloord, the Netherlands. Available immediately – price on request. More photos and full specifications: / Machine type: Cube, strip and slice cutting machine Condition: Used Cutting types: Cubes, strips and slices Infeed: Inclined cleated conveyor with wide loading hopper Mobility: Cutting unit on swivel castors; conveyor on adjustable feet Safety: Emergency stop on the conveyor Construction: Stainless steel Origin: Kronen, Kehl (Germany)

Condition: excellent (used), Year of construction: 2012, Weinig E3 infeed and A3 outfeed E3 Infeed Scissors lift before crossfeed. Crossfeed table to infeed accelerator. Moulder infeed accelerator. A3 Outfeed Drop leaf. Crossfeed belt conveyor. Laedjx Rblpopfx Alyoh Scissors lift with pack chains. pack outfeed chains.

Condition: used, Year of construction: 2023, machine/vehicle number: CA73, Used capsuling machine Robino & Galandrino Minibloc year 2023 – 3000 bphThe used capsuling machine Robino & Galandrino Minibloc year 2003 – 3000 bph offers a compact and versatile solution for automatically applying capsules to bottles of still and sparkling wine. As a result, this machine suits diverse production environments. Robino & Galandrino designed this monoblock machine to meet different production needs while ensuring high operational efficiency and consistent product quality.Structure and mechanical configurationRobino & Galandrino configured this machine as a Minibloc automatic capsuling monoblock. Specifically, the design includes two operational heads, each performing specific stages of the capsuling process. The infeed screw aligns and guides the bottles precisely into the processing area. In this way, the machine ensures accurate bottle positioning throughout the cycle.Performance based on capsule typeThe used capsuling machine Robino & Galandrino Minibloc year 2003 – 3000 bph delivers specific output levels based on the capsule type. For instance, it distributes and spins polylaminate capsules on still wine bottles at speeds of up to 1200 bottles per hour. It heat-shrinks PVC capsules onto still wine bottles at up to 3000 bottles per hour. It forms four folds and smooths sparkling wine caps (capsuloni) at speeds of up to 2000 bottles per hour. Moreover, each process maintains excellent consistency and minimal deviation. Therefore, it can satisfy various technical bottling standards across the wine sector.Capsule feeding systemThe machine uses a horizontal capsule magazine with a motorized belt that feeds capsules into the distributor. Notably, it holds around 1200 capsuloni or 1800 standard wine capsules, allowing operators to run longer production cycles without frequent reloads. Consequently, this reduces machine downtime and improves overall line efficiency. Additionally, the feeding system ensures steady capsule flow under different operating speeds. Thus, it contributes to the machine’s stability and reliability.Distributor and synchronization mechanismsThe single-bell distributor performs a 90-degree angular movement to release the capsules. At the same time, a mechanical needle system separates the capsules before distribution to prevent jams and ensure a continuous process. Furthermore, the encoder actively manages the synchronization of all functions and adjusts them in real time. Thanks to this, the system can react dynamically to changes in bottle flow and capsule format. In contrast to older systems, this configuration minimizes manual calibration.Format compatibility and flexibilityThe machine processes bottles in three formats: 0.375 liters, 0.75 liters, and 1.5 liters. Accordingly, operators can use it across different bottling lines and product ranges. In fact, the used capsuling machine Robino & Galandrino Minibloc year 2003 – 3000 bph adapts well to the needs of small and medium-sized wineries that require flexible equipment.Operational conclusionsTechnicians appreciate the used capsuling machine Robino & Galandrino Minibloc year 2003 – 3000 bph for its solid mechanics and well-optimized capsuling system. In particular, the dual-head structure and encoder-based adjustments enable precise operation and quick format changes. Moreover, i... Laede Ady Evopfx Alysh

Condition: used, Year of construction: 1985, Working width 1350 mm Number of sanding units 3 st. VIET Wide-Belt Sanding Machine, Type Valeria 3CCT TM1350 ----- Sold on behalf of a client. The machine can still be viewed in operation for a short time! Machine No.: 30036022 Technical Specifications & Units ----- Working width: 1,350 mm Main drives: 3 separate electric motors located at the machine base to drive the sanding belts. Feed system: Perforated vacuum conveyor belt (vacuum bed) with an upstream rubberized infeed roller and a preceding roller table. Internal Unit Configuration: Lodpfx Als Adfddjyjah • 3 sanding belt stations. • Mechanical belt oscillation via upper tracking rollers. • Integrated pneumatic belt-cleaning blow-off systems (blow-off pipes located on the inner side of the units). • 1 unit equipped with a manually adjustable dial indicator/fine-adjustment mechanism on the sanding platen. Pneumatic Controls (upper control panel): • Pressure gauges and control valves for: belt tension (minimum tension), brake cylinders, belt oscillation, and internal pressure (for the sanding platen). • 3 separate toggle switches for the belt blow-off/air-jet systems (units 1, 2, and 3). Electrical Control Panel (right-hand control panel): • 3 analog ammeters to display the load on the sanding belt motors. • 1 analog voltmeter. • Digital height display/thickness setting. • Main switches for the individual units (belt 1, belt 2, belt 3). • Selector switch for feed direction (climb milling/down-cut vs. conventional/up-cut mode). Technical specifications according to the manufacturer – no guarantee!

Condition: used, Year of construction: 2013, machine/vehicle number: FA59, Used automatic Tecmi shrink wrapper - 2013Technical Specifications & Performance DataThis automatic shrink wrapper is engineered for high-efficiency industrial packaging of PET bottles on a used bottling line. Manufactured by TECMI, the machine combines reliable mechanics with Siemens automation to deliver consistent bundle quality for beverage production and other industrial packaging applications. With a compact footprint and robust construction, it is well suited for second hand integration into existing packaging machinery layouts.Manufacturer: TECMIModel: EV 750 – 50 – TT 70-45 x3Year: 2013Production speed: 50–100 bundles/minute, (36.000 BPH on 3x2 format) Configured format: PET 380 ml x 6-packContainer types: PETElectrical data: 440 V, 60 HzWeight: 1300 kgOperating mode: AutomaticControl platform: Siemens PLC/HMIAdvanced Automation & Control SystemsThe shrink wrapper is managed by a Siemens PLC with an HMI interface, providing intuitive setup, recipe handling, and diagnostic visibility for operators. Automated film handling, sealing, and shrink processes enable stable performance across the specified speed range. Temperature control and sealing parameters can be fine-tuned to maintain seal integrity and pack appearance, supporting consistent quality under demanding beverage production schedules. Interlocked guarding and safety monitoring are integrated into the control system to protect operators and maintain uptime.Production Line Integration CapabilitiesDesigned for seamless integration into a used bottling line or as a standalone unit, this packaging machine supports infeed from upstream conveyors and discharge toward downstream case handling or palletizing systems. The configured setup is optimized for PET 380 ml bottles arranged in 6-packs with neutral film. The automation platform simplifies line synchronization and facilitates quick adjustments when coordinating with other bottling equipment such as fillers, labeling machines, and palletizers.Machine Condition & Maintenance HistoryThe machine is currently in storage. As a second hand unit, it has higher working hours compared to other available machines noted as having less than one year of use. Despite this, the Siemens-based control and industrial-grade build are designed for longevity, offering dependable performance when properly serviced and commissioned.Operational Performance & VersatilityTargeted at industrial packaging needs in beverage production, the unit runs neutral film and forms stable 6-pack bundles of PET bottles. Its speed envelope of 50–100 bundles per minute provides flexibility for varying line capacities and demand profiles. The machine’s automation and consistent sealing performance support repeatable packaging quality, minimizing rework and optimizing throughput on high-volume lines.Installation Requirements & Site PreparationPlan for adequate floor space based on the EV 750-50 layout and ensure clear access for film loading and maintenance. Electrical service must provide 440 V,... Laedpfx Ae Adyvnjlyjh

Condition: used, Year of construction: 2020, Spray coating machine Manufacturer: Homag Type: PROFI GSF100/P/13 Year of manufacture: 2020 Technical data Spray machine for automated coating of furniture components, doors, stairs, and interior design elements with water-based or solvent-based paints. - Sled runner with a spray arm to accommodate four spray guns - Workpiece transport with a vacuum conveyor belt with additional paper support - Feed speed: 1 - 4.5 m/min - Average coating speed: 1.5 - 2.5 m/min - Working height: 900 mm - Extraction volume: approx. 10,000 m³/h - Diameter of extraction nozzle: 350 mm - Electrical connection power (without additional equipment): 10 kW - Compressed air consumption (without spray application): approx. 150 nl/min Workpiece parameters Workpiece width: 100 - 1300 mm Ljdps Adr Hxefx Alyoah Workpiece length: 300 - 3000 mm (without additional workpiece support) Workpiece thickness: 5 - 60 mm Workpiece weight: max. 80 kg Workpiece material - Chipboard, MDF and HDF boards - Solid wood components - Lightweight panels - The difference in height between workpieces may be a maximum of 2 mm Coating material - Paint based on water or solvent Electrical parameters - Operating voltage 400 volts, 50 Hz Roller table for machine infeed/outfeed - Powered roller table for automatic transport of workpieces Mobile paper roll trolley - For quick changing of the unwinding paper roll Touchscreen operation - Machine operation is performed via a touchscreen control panel, which is ergonomically positioned on the operating side of the machine. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Year of construction: 2021, condition: used, machine/vehicle number: AT95, Used Posimat bottle unscrambler - year 2021Technical Specifications & Performance DataThis Bottle Unscrambler POSIFLEX-A-20 is a proven solution for high-efficiency bottle handling at the start of a used bottling line. Manufactured by Posimat, it is engineered to orient and feed empty bottles reliably into downstream industrial packaging equipment, supporting beverage production environments that demand consistent uptime and gentle container treatment.Manufacturer: PosimatModel/Type: POSIFLEX-A-20Manufacturing year: 2021Production speed: up to 100 bpm (bottles per minute)Application: Automatic bottle unscrambling and infeed to conveyorsCompliance: CE marked; designed according to 2006/42/CE (Machinery), 2014/30/CE (EMC), 2014/35/CE (Low Voltage)Container handling: Optimized for bottle feeding in beverage production linesUse case: Ideal for second hand installations and upgrades of existing used bottling line layoutsAdvanced Automation & Control SystemsThe POSIFLEX-A-20 is built for automated operation with coordinated control of the hopper, orienting system, and discharge. Operators benefit from intuitive control interfaces and precise speed regulation to match downstream equipment, improving changeover efficiency and minimizing stops.Integrated control panel for speed and function managementAutomated bottle orientation with high repeatabilitySensor-based jam detection and bottle flow monitoringRecipe-friendly setup for rapid format adjustmentDesigned for continuous-duty operation in industrial packaging environmentsProduction Line Integration CapabilitiesThis unscrambler integrates seamlessly at the head of a beverage production line, feeding containers to air or tabletop conveyors leading to rinsing, filling, capping, and labeling machines. It supports standalone or inline operation and can be configured to accommodate a wide range of bottle sizes.Compatible with standard conveyor interfacesFlexible layout options for compact or extended linesFormat change capability for different bottle heights and diametersSuitable for integration into water, juice, wine, beer, and general beverage production processesMachine Condition & Maintenance HistoryBuilt in 2021, this second hand unit presents a modern design life and is offered in ready-for-operation condition. Its contemporary engineering and CE-compliant construction make it a strong candidate for facilities seeking to expand or modernize their used bottling line with minimal risk and reduced commissioning time.Operational Performance & VersatilityEngineered for stable performance at up to 100 bpm, the POSIFLEX-A-20 provides gentle bottle handling, consistent orientation, and smooth discharge to conveyors. This enhances downstream efficiency by reducing starved or blocked infeed conditions at rinsers, fillers, and labelers, improving overall line OEE.Gentle handling for lightweight bottlesConsistent bottle orient... Lodpfx Alo Adt Nueyjah

Condition: excellent (used), functionality: fully functional, engine power: 22 kW infeed conveyor belt trough dimensions: 1760 x 340 mm shaft width: 350 mm screen size: 15 mm Ledpj Adpbtjfx Alyoah toothed feed rollers positioned before the shaft, both above and below

Condition: used, Year of construction: 2010, Panel saw Manufacturer: Nardello Model: Elegance S/N2155 Year of manufacture: 2010 Lsdpfxj Adzc Aj Alyeah Technical specifications: - with infeed and outfeed roller conveyor - Minimum width: 60 + 60 mm - Maximum width: 450 + 450 mm - Length: 350 - 2,000 mm - Panel thickness: 15 - 30 mm Note: The technical specifications and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2014, machine/vehicle number: FA60, Used ZELGA Shrink wrapper RZE 400 - 2014Technical Specifications & Performance DataThis automatic Shrink Wrapper from ZEGLA is designed for reliable secondary packaging of beverage containers, specifically aluminum cans. The model RZE 400 provides consistent bundle formation with neutral film, ensuring robust presentation and pallet stability for distribution. Built with industrial-grade components and a proven control platform, it is suitable for integration in a used bottling line or as a second hand upgrade to existing beverage production.Manufacturer: ZEGLAModel: RZE 400Year: 2014Machine category: Shrink WrapperContainer compatibility: Aluminum cansOperating type: AutomaticPLC/Control: Allen BradleyFilm type: Neutral filmElectrical supply: 440 V, 60 HzWeight: 1700 kgAdvanced Automation & Control SystemsThe machine is equipped with an Allen Bradley control architecture for dependable automation and straightforward diagnostics. Operators benefit from stable process control, precise temperature management within the shrink tunnel, and consistent infeed/outfeed synchronization for smooth bundle handling. The automatic operating mode reduces manual intervention while supporting repeatable format settings and efficient changeovers.Allen Bradley PLC for reliable control and integrationAutomatic sequence management for infeed, wrapping, and shrink tunnelStable temperature regulation for consistent film shrinkageOperator-friendly controls for setup and routine adjustmentsProduction Line Integration CapabilitiesEngineered for seamless inclusion within industrial packaging and beverage production environments, the ZEGLA RZE 400 can be positioned downstream of can filling and labeling equipment and upstream of palletizing systems. It supports integration with standard conveyor systems and typical accumulation solutions used in modern bottling equipment and packaging machinery.Compatible with upstream can filling and labeling processesDownstream-ready for case handling or palletizingSuitable for standalone use or full production line integrationDesigned for shrink-wrapping bundles with neutral filmMachine Condition & Maintenance HistoryThe unit is currently in storage and has seen less than one year of active operation. Its limited runtime and storage status make it a compelling option for producers seeking a second hand shrink wrapper with low wear. The overall presentation indicates careful handling and readiness for recommissioning in a used bottling line or packaging machinery layout.Operational status: In storageUsage: Less than 1 year in productionOperational Performance & VersatilityPurpose-built for can multipacks, the RZE 400 focuses on stable pack formation and consistent shrink quality with neutral film. This configuration supports beverage producers aiming to improve secondary packaging presentation... Laodpfe Adyvhex Alyeh

Condition: ready for operation (used), Log infeed line Tähkä, equipped with a lower device for turning logs Laedpfx Aexg Rvgslyjh

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, working width: 230 mm, planing height: 120 mm, spindle diameter: 40 mm, total width: 1,400 mm, total height: 1,600 mm, total length: 3,700 mm, overall weight: 1,500 kg, spindle speed (max.): 6,000 rpm, type of input current: three-phase, input voltage: 400 V, table length: 2,000 mm, number of spindles: 5, input frequency: 50 Hz, input current: 67 A, For sale: A highly reliable, premium-quality Weinig Unimat 300 four-sided planing and moulding machine in excellent, low-use condition. Manufactured in 2008, this unit represents one of the final production years of this legendary compact series. Perfect for small to medium-sized woodworking shops that demand top-tier precision and rapid setups. Technical Specifications: • Year of Manufacture: 2008 (Low operating hours, well-maintained) • Number of Spindles: 5 • Spindle Arrangement: Bottom – Right – Left – Top – Bottom • Spindle Speed: 6,000 RPM • Spindle Diameter: 40 mm • Feed Speed: 2-stage manual configuration (6 and 12 m/min) • Working Width: 20 mm up to 230 mm • Working Height: 8 mm up to 120 mm • Infeed Table Length: 2,000 mm • Drive System: Heavy-duty Cardan (universal joint) feed drive system for smooth and powerful workpiece traction Laedpfsz Srbmsx Alyeh • Table Features: Hard-chrome plated tables to prevent resin buildup and minimize wear • Enclosure: Full safety and sound-insulation safety hood (CE certified) • Sold together with additional accessories / cutterheads (ready for immediate operation). • Free loading onto transport: The machine is in pristine mechanical and visual condition.

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1877, cutting height (max.): 300 mm, total length: 18,500 mm, total height: 2,550 mm, cutting width (max.): 450 mm, total width: 2,400 mm, control cabinet width: 400 mm, saw blade diameter: 735 mm, overall weight: 11,000 kg, control cabinet length: 1,600 mm, control cabinet height: 2,400 mm, power: 15 kW (20.39 HP), type of input current: three-phase, Equipment: safety light barrier, Submitting a bid obligates the bidder to collect the machine by week 46. TECHNICAL DETAILS Machining area Cross-section: 20 × 60 to 300 × 450 mm Material feed Ljdpo Aayqwofx Alyoah Infeed cross conveyor: 5 lines Conveyor length: 2.2 m Saw unit Saw: Undercarriage swivel miter saw Milling units Milling unit: Universal milling machine Tools for universal milling machine: Roller cutters and finger cutters Vertical combination support Drilling units: 1 unit Finger cutter: 1 unit Horizontal combination support Drilling units: 2 units Grooving tool: 1 unit Workpiece handling Beam turning station: fully automatic Foundation and installation Minimum floor slab thickness: 10 cm Floor slab requirement: level, adequately reinforced, and suitable for anchoring Electrical data Voltage: 400/230 V, 3/N/PE Fuses: 3 × 63 A Frequency: 50 Hz Peak demand: 15 kW Compressed air supply Flow rate: max. 600 l/min Operating pressure: 8.5 bar Permissible pressure: max. 10 bar Control system Retrofitting: Fall 2020 by Hundegger Control system: CAN control Previous control system: MIPPS EQUIPMENT Infeed cross conveyor with 5 lines Undercarriage swivel miter saw Universal milling machine Roller cutters Finger cutters Combination support for vertically operating tools Drilling unit, vertical Finger cutter, vertical Combination support for horizontally operating tools 2 drilling units, horizontal Grooving tool, horizontal Fully automatic beam turning station

Condition: like new (used), Year of construction: 2022, operating hours: 450 h, functionality: fully functional, machine/vehicle number: 20220807 01320A, type of input current: AC, total length: 6,000 mm, total height: 1,850 mm, total width: 1,100 mm, input voltage: 2,20,380 V, overall weight: 550 kg, input current: 1,215 A, Equipment: clamp, High-Speed Automatic Horizontal Flow Wrapper (Pillow Pack Machine) – Ultra-Low Usage Heavy-duty automatic horizontal flow packaging machine manufactured by Qingdao Bostar Packing Machinery Co., Ltd. Used for a very short period with under 450 total working hours. The machine is in excellent, like-new operational condition. Key Technical Specifications & Features: • Condition: Used – Like New (< 450 operating hours) • Gas Flush Option: Equipped with gas flushing capabilities (e.g., Nitrogen injection) for Modified Atmosphere Packaging (MAP) to extend product shelf life. • Construction: Stainless steel frame, machine housing, contact parts, and long product infeed conveyor Ljdpfxoz Ihbao Alysah • Automation & Controls: Integrated Panasonic FP-XH C40T PLC automation unit • Motion Drive: 3-Axis Panasonic Servo Motor System for precise, independent control of infeed, film feeding, and sealing jaw cross-cuts • Infeed & Film Handling: Extended stainless steel belt conveyor with pushers, dual film roll holders, photoelectric eye-mark registration sensor for precise print alignment, and adjustable bag-forming box • Sealing & Cutting: Rotary horizontal sealing jaws with integrated heating elements, rotary brush discharge belt, and pneumatic pressure regulation • HMI Interface: Touchscreen control panel mounted on a swivel arm for easy recipe settings and diagnostics Ideal Applications: Pillow-pack packaging of bakery items (biscuits, wafers, croissants, cakes), confectionery, energy bars, snacks, trays, and various non-food/industrial products. Location: Amman, Jordan Terms: EXW

Condition: used, Generator infeed table before resaw Laedez Ap Efspfx Alyjh

Condition: used, Centering infeed conveyor Söderhamn 443. With log rotation, for logs and cants. Infeed conveyor Soderhamn 447, for logs and blocks Lodpoy Th Upsfx Alyjah Reducer Soderhamn 245 15" disc 3 spiral

Condition: used, Year of construction: 2004, machine/vehicle number: PAL55, Used OCME PERSEUS L12 palletizer 22680 BPHTechnical Specifications & Performance DataThe OCME Perseus L12 Palletizer is a conventional automatic palletizing system engineered for wrap-around packs and cases. Built in 2004 and featuring a robust mechanical design with Siemens automation, it delivers reliable performance for high-volume beverage and food packaging environments. Designed to handle products packed in cartons coming from upstream wrap-around or case packing machines, it supports standardized pallet formats for streamlined logistics and warehousing.Manufacturer: OCMEModel: Perseus L12Machine type: Palletizer (conventional, low-level infeed)Year of manufacture: 2004Maximum speed: 22680 (3x2 pattern)Handled unit: Wrap-around packs / casesSupported pallets: EPAL 800x1200 mmContainer materials downstream of packs: PET, Glass, Aluminum cansAutomation: Siemens PLCCompressed air: 6 barLayer pad inserter: AutomaticCompliance: CE-markedAdvanced Automation & Control SystemsThe Perseus L12 integrates a Siemens PLC for dependable control, recipe management, and precise coordination of infeed, layering, and discharge operations. The HMI-driven interface enables quick format selection and parameter adjustments to minimize downtime. Safety interlocks and a multi-color stack light provide clear visual status and enhance operator awareness. Modular programming supports stable layer formation and accurate placement of interlayer pads to ensure load integrity.Siemens PLC with user-friendly HMIRecipe-based format management for rapid changeoversIntegrated safety interlocks and emergency stop circuitsAutomated layer pad insertion synchronizationProduction Line Integration CapabilitiesEngineered for seamless integration into a used bottling line or second hand industrial packaging setup, the Perseus L12 accepts cartons from wrap-around or case packers and forms stable pallet loads. It interfaces easily with standard conveyor systems and can be configured for various layout constraints due to its low-level infeed design. It is suitable for beverage production handling of PET, glass, and aluminum can packs, making it ideal for water, CSD, beer, wine, milk, oil, and spirits applications.Inline operation with wrap-around packers and case packersDesigned for PET, Glass, and Aluminum can packsOptimized for EPAL 800x1200 palletsMulti-format flexibility for diverse product SKUsMachine Condition & Maintenance HistoryThis palletizer is ready for operation, overhauled, and offered with compatible spare parts. It includes a warranty period to ensure dependable startup and performance. The overall condition supports immediate deployment into beverage or food packaging lines with minimal commissioning effort.Ready for immediate useOverhauled with compatible spare partsWarrant... Ljdpfx As Adyu Relyjah

Year of construction: 1991, condition: excellent (used), Fully automatic gate system HDN 600 with automatic infeed ZE, including mechanization. Laodoz Ehfaspfx Alysh Technical data: Passage height: 700 mm Passage width: 735 mm Stroke: 600 mm Feed rate: max. 15 m/min Water-cooled guides Drive – Gearbox The system has demonstrably only been in operation for 10 years.

Condition: ready for operation (used), Year of construction: 2002, TECHNICAL DATA range of diameters for processed pins: 50-140mm max. diameter of input material: 200mm min. length of input material: 600mm Lajde Adylvspfx Alyjh max. allowance for machining per side: 30mm installed sleeve with a diameter of 100mm additional sleeves included: 45mm, 70mm, 80mm motor for driving the cutter head: 22kW 3 types of feed speeds + forward/reverse feed motor: 2.2kW In sequence: infeed trough + 3 toothed draw rollers + 4-knife cutter head + 3 smooth draw rollers + dimensions (L/W/H): 2600x1100x1500mm weight: approximately 1600kg PRODUCT FEATURES The DNAA type lathe is designed for the precise turning of wooden shafts and stakes with diameters from 50 to 140mm and a minimum length of 600mm. The machined shafts are used in the construction of summer cottages, recreational equipment, playground equipment for children, and various types of fences and screens.

Condition: used, Year of construction: 2016, Transnorm angled inlet outlet rejector infeed conveyor 30°-1040-1080-1050 RA2518 Year of manufacture: 2016 discharge angle: 30° Nominal/external width (NB): 1080 mm Useful width (NUB): 1050 mm Conveyor speed: 1.0 m/s Roller diameter: 50 mm, steel rolls Drive: SEW Movimot Electrical data: 1,1 kW 50 Hz, 380V center distance: 75 mm Height: 250 mm Straight section: 1040, 2900 to the tip of the angle Optionally available: Supports Length variation Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, expert advice, simply get in touch with us. Lajdszqa Nkjpfx Alysh Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics