Used Brüninghaus Ovs 0 28 Dfr/30 for sale (94,853)

Condition: used, Year of construction: 1992, Hydraulic pump, oil pump, gear pump, vane pump, hydraulic unit -Manufacturer: Brueninghaus, hydraulic pump type OVS 0 28 DFR/30 R-PPA 12 N 00 -Pump: Nominal pressure 250 bar -Drive: Behncke QU FA 00L4B-41 -Power: 3 kW 1442 rpm Isdpoi En Dujfx Ahhstk -Dimensions: 620/300/H270mm -Weight: 50kg

Year of construction: 1999, condition: ready for operation (used), A walk-in CNC 5-axis large-format portal milling machine Fooke is available. Travel X/Y/Z: 3000mm/2500mm/1150mm, bridge height: 800mm, table dimensions X/Y: 3000mm/2500mm, spindle power: 28kW, spindle speed: 16000rpm, swivel range A: +/-100°, rotary range C: +/-181.5°, feed rate: 15m/min, rapid traverse X/Y: 20m/min, rapid traverse Z: 10m/min, rotary speed A/C: 8rpm, tool holder: HSK-63A. Machine dimensions X/Y/Z: approx. 6000mm/6000mm/5200mm, weight: approx. 50000kg, control: Siemens 840D powerline. Documentation available. On-site inspection is possible. Itedpfxoygmc Dj Ahhsk

Condition: good (used), Year of construction: 2004, operating hours: 16,651 h, functionality: fully functional, machine/vehicle number: M342-06204054DFA, travel distance X-axis: 760 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, feed length X-axis: 760 mm, feed length Y-axis: 510 mm, feed length Z-axis: 610 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 18 kVA, torque: 236 Nm, controller manufacturer: Hurco, controller model: Ultimax 4, workpiece length (max.): 1,020 mm, workpiece width (max.): 510 mm, workpiece height (max.): 610 mm, workpiece weight (max.): 750 kg, total height: 2,700 mm, total length: 280 mm, total width: 2,300 mm, table width: 510 mm, table height: 850 mm, table length: 1,020 mm, table load: 1,000 kg, rotational speed (min.): 10 rpm, rotational speed (max.): 10,000 rpm, overall weight: 4,500 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 10,000 rpm, coolant supply: 6 bar, spindle nose: Steilkegel Gr. 40, number of spindles: 1, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, Excellent condition: Hurco VMX 30 with extremely low operating hours! For sale is a very well-maintained, vertical 3-axis machining center, a Hurco VMX 30, manufactured in 2004. The machine is in exceptionally good condition for its age. As can be easily seen from the operating hours, the machine has only been used very little by us. It was used exclusively for light-duty operation/toolmaking and was not subjected to heavy series production. The mechanical components (guideways, ball screws, and spindle) are correspondingly only slightly worn and offer high precision. The machine is equipped with the popular Ultimax 4 dual-screen control system, which is highly regarded worldwide for its extremely fast and easy dialog programming directly on the machine. Isdpfx Aezudd Tohhjtk

Condition: used, functionality: limited functionality, Year of construction: 2009, operating hours: 14,021 h, machine/vehicle number: 09528020, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Omron, working width: 3,040 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 2 °, stroke rate (max.): 12 1/min, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, back gauge adjustment: CNC-controlled, back gauge: 1,000 mm, back gauge speed R-axis: 330 mm/s, input voltage: 400 V, input current: 17 A, type of input current: three-phase, overall weight: 5,960 kg, total length: 3,706 mm, total width: 1,355 mm, total height: 1,955 mm, year of last overhaul: 2021, Equipment: centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, FASTI 528-30/6 hydraulic guillotine shear usable length 3040mm Year of manufacture 2009, demonstration unit purchased in 12/2011 Max. sheet thickness at 400 N/mm2: 4.0mm Max. sheet thickness at 700 N/mm2: 6.0mm CNC control FM5.1 Itedpfx Ahezi Uq Hehsk additional blade for re-sharpening Machine serviced by the manufacturer's service department Machine in good working order, in continuous use, minor oil leak on the right cylinder Machine for sale due to a change in the machine park

Year of construction: 2012, operating hours: 25,967 h, condition: used, functionality: fully functional, machine/vehicle number: 2525, We offer this used COGEIM TA 30 BANFI TA 30 drum-type shot blasting machine, manufactured in 2012. Machine type: TA30-2892 Serial number: 2525 Year of manufacture: 2012 Minimum air pressure: 5 bar Maximum air pressure: 8 bar Weight: 18,000 kg Itsdpfx Ahjzrwy Nehok If you have any questions or require further information, please do not hesitate to send us a message or call us.

Year of construction: 2025, condition: new, functionality: fully functional, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Iedpfx Aeznr Sxshhjtk Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: used, TECHNICAL DETAILS Quenching tank for stirring oil quenching Itodpfsug U Thjx Ahhek - power : 0.25 [kW] - voltage : 3 x 380 [V]

Condition: used, Year of construction: 2000, machine/vehicle number: 0-201-24-5315, functionality: fully functional, operating hours: 9,99,999 h, power: 12 kW (16.32 HP), input voltage: 400 V, input current: 45 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 150 mm, number of axes: 3, number of slots in tool magazine: 12, controller manufacturer: HOMAG, actuation type: electric, total height: 2,650 mm, total length: 5,750 mm, total width: 4,000 mm, overall weight: 5,885 kg, year of last overhaul: 2023, Equipment: CE marking, documentation/manual, The machine is in working order and is being replaced due to the purchase of a new machine. Isdpfx Ajy Tmc Eohhotk The price includes an associated vacuum pump.

Condition: used, 30kw 280BAR Itsdpecl R Abefx Ahhek 2 PIECES IN STOCK

Condition: used, Year of construction: 2022, operating hours: 360 h, functionality: fully functional, machine/vehicle number: 521080, total height: 3,780 mm, total length: 10,800 mm, total width: 5,160 mm, volume flow: 27,000 m³/h, type of input current: AC, inner dimension height: 3,000 mm, inner dimension length: 10,000 mm, inner dimension width: 5,000 mm, input voltage: 400 V, space requirement height: 3,780 mm, space requirement length: 10,800 mm, Equipment: cabin, documentation/manual, emergency stop, lighting, DURST combined painting and drying system D-LTA 30/30-ü-natural gas – Year of manufacture 2022 For sale is a high-quality combined painting and drying system from the manufacturer DURST, type D-LTA 30/30-ü-natural gas, year of manufacture 2022. The system is in very good and well-maintained condition and is suitable for the professional processing of both conventional and water-based paints. It can be used flexibly in spray and drying operations and features a powerful supply and exhaust air system, natural gas heating, heat recovery, and a modern PLC and frequency inverter control system. Technical highlights and features: • Manufacturer: DURST Lackier- und Trocknungsanlagen GmbH • Type: D-LTA 30/30-ü-natural gas • Year of manufacture: 2022 • Design: combined painting and drying booth • Booth internal dimensions: approx. 10,000 × 5,000 × 3,000 mm • Booth external dimensions: approx. 10,800 × 5,160 × 3,080–3,780 mm • Air flow rate: approx. 27,000 m³/h for both supply and exhaust air • Motor power of ventilation: 2 × 11 kW • Total electrical connection: approx. 25 kW • Heating power: up to approx. 250 kW • Heating: direct gas surface burner, natural gas • Drying temperature: up to approx. 70 °C • Air changes: approx. 180 times • Air velocity: approx. 0.50 m/s Itjdpfx Aszubtlohhsk • Heat recovery via cross-flow heat exchanger • Manufacturer's specification for heat recovery: approx. 47 % efficiency on average per year, up to approx. 80 % recovery factor under optimal conditions • DURST EcoTronic system with frequency-controlled fan control • Operating modes including spray operation, partial load operation, stand-by operation, and hall heating operation • HPS heating program control for efficient drying, especially for water-based paints • PLC control with frequency inverters and monitoring devices • Remote maintenance module • LED ceiling lighting, Ex-Zone 2 • Illumination level approx. 1,090 Lux • Rear extraction wall with paint mist separator • Pre- and post-filtration of the supply and exhaust air • Partial filter ceiling with fine dust filtration • Sectional door and two partially glazed emergency exit doors • Insulated, double-walled booth housing with 80 mm mineral wool panels In spray operation, the system operates in fresh air/exhaust air mode. The drawn-in fresh air is filtered and heated via the gas surface burner. The exhaust air is passed through the paint mist separator and post-filtration. In drying operation, the system operates primarily in recirculation mode with a fresh air proportion of approx. 10 %. The integrated HPS control system enables energy-efficient and uniform drying and is particularly interesting for processing modern water-based paints. Another significant advantage is the integrated heat recovery system, which allows a considerable amount of the heat contained in the exhaust air to be fed back into the process. The system dates from 2022 and is in very good condition. Due to the generous booth dimensions, the high air flow rate and the extensive control and energy technology, it is ideally suited for industrial and commercial painting applications. Further technical documents and documentation for the system are available and can be provided upon request.

Year of construction: 1998, condition: good (used), machine/vehicle number: 0159488169537, Offer 23293 Technical data: Ijdpfopuy H Dex Ahhotk - Pressure capacity 300 KN - punches e.g. up to 30 mm Ø in steel 9 mm - or with special punching device up to 100 mm Ø in steel 2.5 mm - stroke infinitely variable 0 to 28 mm - stroke rate 26 to 36 1/min - throat 610 mm - Installation height 240 mm - Drive 400 V / 4 kW - Space requirement approx. W 750 x H 1650 x D 1350 mm - weight approx. 1300 kg - with: - foot switch - grain search device, - support table with foldable stops W 1100 x D 850mm - shifting distance of the stops from the center of the punch - width between Li and Re approx. 470 mm x D 510 mm

Condition: good (used), Year of construction: 2006, functionality: fully functional, Max. machining diameter: 2,800 mm Min. machining diameter: 1,400 mm Max. machining height: 600 mm Itedpfx Ahozu Itrshsk Max. workpiece weight: 5,000 kg Rotational speed of the chuck: 21–68 /min.

Condition: excellent (used), Year of construction: 2005, operating hours: 38,388 h, functionality: fully functional, machine/vehicle number: 019.3784, workpiece weight (max.): 130 kg, grinding length: 1,000 mm, total width: 1,970 mm, total length: 2,735 mm, total height: 1,700 mm, quill travel distance: 35 mm, quill stroke: 35 mm, quill diameter: 50 mm, distance between centers: 1,000 mm, type of input current: AC, spindle speed (max.): 2,110 rpm, spindle speed (min.): 1,670 rpm, grinding spindle speed: 2,110 rpm, overall weight: 3,400 kg, input frequency: 50 Hz, input voltage: 400 V, workpiece spindle speed (max.): 1,000 rpm, STUDER S30-1, manufactured in 2005, machine no. 019.3784 – universal cylindrical grinding machine, hydraulically controlled, for between-centers grinding and external grinding. Well-maintained, original condition, no indication of damage or weld repairs. Included: Original operating manual from Fritz Studer AG (DE/EN/FR, including spare parts catalog and noise measurement report) and EC declaration of conformity, both issued for this machine number. According to this factory documentation, it is the version with a center distance of 1,000 mm. EQUIPMENT - Grinding spindle with external grinding wheel on the left, Ø 400 x 80 x Ø 127 mm, hydrodynamic plain bearings, mounting taper Ø 63 mm - Workpiece spindle, swiveling 0-90°, MK 5, collet chucks W-25, 30-1,000 min-1 continuously variable via frequency converter - Three-jaw chuck mounted, drive for between-centers grinding, centering point in the tailstock - Tailstock MK 3, quill stroke 35 mm, adjustable spindle pressure, fine adjustment for roundness ± 40 µm - Adjustable dressing device on the tailstock (dressing by hand; diamond is a wear part) - Digital display Sony LD10 on swivel arm - Hydraulic unit Wandfluh (CH), coolant supply with filtration and aerosol extraction - Machine bed made of mineral cast Granitan S103 - 8 grinding wheel mounting flanges, including one balancing flange IMPORTANT – WHAT IS NOT INCLUDED This machine does NOT have an internal grinding attachment, NO belt spindles, and NO in-process measuring control. The series is prepared for these at the factory, but none of them are installed on this machine; available as accessories from STUDER. Grinding wheels are also not included in the scope of delivery. We only describe what we can document photographically. TECHNICAL DATA (according to the operating manual for this machine) - Center distance 1,000 mm, clamping length 1,030 mm, table stroke 1,050 mm - Max. workpiece weight between centers 130 kg, table swivels 8.5° - X: Rapid traverse 60 mm, plunge depth 3.4 mm in Ø, feed rate 0.012-6 mm/min, incremental feed from 0.001 mm - Z: 50-5,500 mm/min, smallest automatic table stroke 1.5 mm - Grinding spindle 1,670 / 2,110 min-1; machine's power rating: max. 35 m/s, wheel up to Ø 400 mm at 1,671 min-1, up to Ø 316 mm at 2,114 min-1 - Automatic hydraulic grinding cycle: rapid approach, feed 1 and 2, sparking 0-6 s, automatic shut-off - Guaranteed working accuracy (factory specification): straightness 0.0025 mm over 400 mm, 0.004 mm over 650 mm; roundness in external grinding 0.0003 mm - Operating hours 38,388.5 h; connection 400 V / 50 Hz, max. 13 kVA, air 5 bar; noise level ≤ 75 dB(A) - Weight approx. 3,500 kg (factory brochure, 1,000 mm version), footprint approx. 2,735 x 1,970 mm Isdpfx Ajzu T Afjhhstk - Center height: will be remeasured and confirmed upon request CONDITIONS Location: 16727 Velten near Berlin. Machine packed on a wooden pallet, delivery 1-2 working days after payment receipt. FCA Velten (Incoterms 2020), loading onto your truck by our staff included. Payment: 100% advance payment. Inspection possible with short notice by appointment. Demonstration and test grinding only by appointment: the machine is disconnected, setup will be carried out by an external service provider; we will agree on the effort and costs in advance. Technical data according to manufacturer's documents and the included operating manual are provided as information; we will confirm individual values during the inspection or upon request. Offer subject to

Condition: good (used), Year of construction: 2004, operating hours: 31,189 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: Heidenhain, controller model: Heidenhain TNC 426/430PB, rotary table diameter: 800 mm, spindle speed (max.): 15,000 rpm, coolant supply: 40 bar, number of spindles: 1, number of slots in tool magazine: 36, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We are offering this well-maintained Matec matec-30 HV universal machining center, manufactured in 2004. Manufacturer: Matec Model: matec-30 HV Year of manufacture: 2004 Condition: good Category ID: 1463 Itodpfx Aszndurjhhok Type ID: 4166 Machine type: Universal machining center 2000 x 800 x 800 mm (x y z) Installed rotary table D800mm Swiveling head, incremental indexing of +-110° 15,000 RPM, SK40, internal coolant 40 bar / compressed air through the spindle, tool magazine with 36 positions Heidenhain TNC 426/430PB The machine is being sold because we need space, and it is coming directly from our production. The location is 85625 Baiern. The machine is still in production and can be inspected while powered on. If you have any questions or need more information, please send us a message or call us.

Condition: refurbished (used), Year of construction: 2008, machine/vehicle number: 8071, functionality: fully functional, pressing force: 100 t, stroke length: 400 mm, overall weight: 21,000 kg, controller manufacturer: DELEM, controller model: DA65, working width: 3,000 mm, bending force (max.): 100 t, control type: CNC control, degree of automation: automatic, number of axes: 8, type of crowning: CNC-controlled, actuation type: hydraulic, Equipment: CE marking, documentation/manual, finger protection, Used Warcom Dinamica 3000 x 100-ton press brake, year 2008, an industrial machine designed for complex and large-format bending operations thanks to its advanced configuration with 8 controlled rear axes (Y1-Y2-Z1 – Z2 – X1 – X2 – R – X). CNC DELEM DA65. With a bending length of 3000 mm and a bending force of 100 tons, this machine is ideal for medium and high-volume applications, with the ability to handle complex geometries and structural components. Key features: Bending force: 100 tons Bending length: 3000 mm 8 controlled rear axes: Y1, Y2, Z1, Z2, X1, X2, R, X → superior flexibility for complex bending operations Model: Opera Robust and reliable construction Year of manufacture: 2004 A highly versatile press brake, suitable for metalworking workshops and manufacturing companies that require power, precision, and multi-axis control in a single solution. Itjdpfxezqtb To Ahhek

Condition: used, Year of construction: 2005, operating hours: 11,800 h, functionality: fully functional, spindle bore: 41 mm, turning length: 750 mm, turning diameter: 330 mm, turning diameter over bed slide: 435 mm, quill diameter: 50 mm, center height: 165 mm, spindle speed (max.): 4,500 rpm, spindle motor power: 11,000 W, overall weight: 1,400 kg, Equipment: rotational speed infinitely variable, Description For sale is a cycle-controlled WEILER E30X750 CNC lathe with a Siemens 810 D control system. Manufacturer/Model: WEILER E30x750 Year of manufacture: 2005 Control system: Siemens 810 D Condition: good, fully functional Location: near Munich Inspection: on-site or via video call by arrangement Pictures/Video: Further pictures and videos of the running machine will be provided upon request. Technical data: Working area: Center height: 165 mm Swinging diameter over bed: 330 mm Swinging diameter over cross slide: 160 mm Distance between centers: 750 mm Turret: Turret head DIN 55027 / DIN ISO 702-3: Size 5 Spindle bore: 40.5 mm Spindle diameter in the front bearing: 70 mm Max. torque on the turret: 180 Nm Main drive: Isdpfx Aezbybvohhjtk Drive power 100% / 60% duty cycle: 9 / 11 kW Speed range: 1–4,500 min⁻¹ Number of speeds: continuously variable Feed / Rapid traverse Feed drive: Three-phase AC feed drives Feed range (continuously variable): longitudinal: 0.001–50 mm/rev (Note: additionally specified 0–20 mm/rev) transverse: 0.001–50 mm/rev Feed force: longitudinal: 6,000 N transverse: 3,000 N Max. rapid traverse speed longitudinal/transverse: 8 / 4 m/min (Note: additionally specified 10 / 7.5 / 5 / 3.5 m/min) Thread cutting range: Metric threads: 0.1–2,000 mm Inch threads: 112–1/64 threads/inch Tailstock / Quill: Quill diameter: 50 mm Quill stroke: 110 mm Internal taper DIN 228: MK 3 Dimensions / Weight: Machine weight: approx. 1,400 kg Dimensions (L × W × H): 1800 × 1350 × 1700 mm Interested? Contact us for further information and to arrange an inspection appointment. Provider MT EVO, Puch bei Salzburg

Condition: new, Year of construction: 2025, functionality: fully functional, laser power: 30 W, type of cooling: air, total width: 60 mm, total height: 1,660 mm, total length: 80 mm, overall weight: 80 kg, The universal laser marking system LAS 28 from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes a laptop incl. holder with Windows operating system. Optionally, the laser model LAS 28 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extensions for marking long parts, can be realized. Ijdpfjunh Hrex Ahhetk Made in Germany - Fiber laser 20W (Optional: 30W, 50W) - Wavelength 1064nm - marking field size 150x150mm (optional: 200x200) - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - signal light for indication of operating status - marking software EZCAD (optional additional laser software) - Pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. part height approx. 270mm - electrically adjustable Z-axis (adjustment of working plane) - frame made of aluminum profile - connection 230V - air cooled - Laptop with Windows operating system - dimensions: 800x 600 x 1660mm (LxWxH) - weight: approx. 80 Kg

Condition: good (used), Year of construction: 2005, total length: 4,200 mm, total width: 2,500 mm, total height: 1,800 mm, product height (max.): 4 mm, overall weight: 7,000 kg, Capacity 4 mm, cutting length 3050 mm, motor 18,5 KW, mot. back gauge, shadow line, frontarms with scale, foot pedal, pneumatic rear support, new IMEX SPS-control, dimension 420x250x180 cm, weight ca. 6500 kgs Iodpfxjtp I S Ao Ahhstk

Condition: excellent (used), Year of construction: 2009, URBAN AKS 6910/4 four-head welding machine, reading from right to left, maximum welding dimensions: 3,000 x 4,000 mm, Windows-based control system, weld bead control with a limit of 0.2 mm for colored profiles, previously operated in a single-shift mode, technically overhauled and fully functional. Itjdpfx Ahezu Nv Iehok

Condition: excellent (used), Year of construction: 1997, Rip and cross saw REMA DMLK 30 Producer of REMA Machine model / type DMLK 30 Year of production 1997 Machine category Longitudinal and transverse saw Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Comments - after the technical review - very good condition - year of production 1997 TECHNICAL PARAMETERS: main engine 3.9 kW Itjdsfv Hphjpfx Ahhok trolley length 1370 mm blade diameter 300 mm angle adjustment 0 - 45 " height adjustment cutting height max. 90 mm cutting width on the right side 885 mm ruler length 1350 mm ratchet extended receiving table two kinds of blade rotation speed 3700 and 5000 RPM The protractor visible in the photos is an additional option for PLN 400 net dimensions: length / width / height 135 x 85 x 135 cm weight ~ 320 kg

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 1354.18, functionality: fully functional, operating hours: 8,000 h, power: 7.5 kW (10.20 HP), pressing force: 30 t, stroke length: 300 mm, operating speed: 60 mm/s, table width: 550 mm, table length: 400 mm, total height: 20,000 mm, overall weight: 2,500 kg, installation height: 500 mm, Technical data: Pressing force 30 t Stroke 300 mm Installation height 500 mm Fold-through hole in table 120 mm Front passage 550 mm Usable table depth 400 mm Usable table width 550 mm Speed from 60 mm/sec. Speed up to 180 mm/sec. Hydraulic oil tank capacity 400 l Drive power 7.5 kW External dimensions L x W x D 1200 x 2000 x 2600 mm Iedpfx Aetrd Ubohhotk Weight 2.5 t With - 2-hand release - light barrier - safety cage - Infinitely variable pressure control, preselection with digital display - Infinitely variable speed control - 8000 switch-on hours - CE marking - complies with UVV

Condition: good (used), Year of construction: 2012, machine/vehicle number: 7363126525, Offer 26697 Technical data: - Pressing force: 320 t - Working width: 3050 mm - Distance between the uprights: 2550 mm - Overhang: 460 mm - Installation height: approx. 630 mm - Stroke: 365 mm - Motor power: approx. 37 kW - Space requirement: approx. W 5700 x H 3250 x D 2450 mm - Weight: approx. 17500 kg - Including: - Swivel arm – control panel with control system - CYBELEC EVA-10S; Y1 + Y2; X, R, Z - Motorized back gauge - Motorized crowning - Safety light curtain Ijdpfx Ahezvmqfehetk - Electric foot pedal - 4-part universal die, split - V-dies - Split upper tool set, various other tools

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Weiler C30 Cycle Lathe (2011) Manufacturer: Weiler Type: C30 x 750 Year of manufacture: 2011 Ijdjztyqmopfx Ahhstk Condition: very good, used, optional with new maintenance before delivery Center distance 750 Swinging diameter over bed 330mm Swinging diameter over cross slide 160mm Travel of cross slide 180mm Bed width 240mm Turning tool cross-section 20 x 20mm Spindle head according to DIN 55027, size 5 Spindle diameter in the front bearing 70mm Spindle bore 40.5mm Internal taper of the main spindle 5mm Drive power 60 %/100 % ED 9/7kW Total speed range 1 – 4,500 rpm Feed force longitudinal 6,000N Feed force facing 3,000N Feed range 0.001 – 10 mm/rev Rapid traverse rate longitudinal/facing 6/3 m/min Metric threads 0.1 – 400mm Inch threads 56 – 1/4 G/inch Module threads 0.125 – 28mm DP threads 224 – 1 Dp Max. number of thread starts 99 Tailstock diameter 50mm Tailstock travel 130mm Internal taper of the tailstock MK3 Length 1750mm Width 1350mm Height 1670mm Weight 1300kg Scope of delivery Chuck Multifix including 17 tool holders Machine lamp Coolant system Machine feet Original documentation Drawer cabinet

Condition: used, Year of construction: 2016, operating hours: 762 h, functionality: fully functional, machine/vehicle number: 10022447, overall weight: 665 kg, load capacity: 30 kg, arm reach: 2,033 mm, KUKA KR 30-3 robotic workstation with KRC4 controller and SmartPad. Operating time: only 762 hours. For sale: a complete robotic workstation based on the KUKA KR 30-3 industrial robot, equipped with a KRC4 controller and a KUKA SmartPad operator panel. The unit comes from a research and development laboratory and was used for testing and industrial automation projects. As a result, the robot has very low operating hours, totaling only 762 hours. This workstation is an ideal solution for system integrators, technical universities, R&D departments, and companies implementing automation and robotics solutions for processes. Technical data: Manufacturer: KUKA Model: KR 30-3 Year of manufacture: 2016 Payload: 30 kg Reach: 2033 mm Controller: KUKA KRC4 Operator panel: KUKA SmartPad Operating time: 762 h Ijdpfsziciwex Ahhetk Controller power supply: 3x400 V Installed software options: EthernetKRL Profinet KRC-Nexxt RemoteService RobotSensorInterface Technical condition: The robot starts up correctly, and communication with the controller works properly. The visual condition is very good. The unit comes from a research and development project and has not been used in continuous industrial production. Included: KUKA KR 30-3 robot KRC4 controller KUKA SmartPad operator panel Cabling as shown in the pictures Additional information: The workstation can be expanded with: - pneumatic or electric grippers, - vision systems, - safety fences, - safety gates, - light curtains, - additional industrial automation equipment. More products are available at tobesold.eu. Before shipment, the unit undergoes technical verification. A demonstration of the unit's operation is available by prior appointment.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 8,562 h, functionality: fully functional, Single-shaft shredder, rotor ripper, hydraulic drive, HÄGGLUNDS hydraulic power unit, SIEMENS 132 kW electric motor, cutting chamber approx. 2800 x 1300 mm, shaft length approx. 2400 mm, feed hopper 4000 mm x 2500 mm, base/frame split for transport purposes, dimensions: length 4500 x width 3300 x height 1400 mm. Inspection and test run possible by appointment. Itsdov Hr Nxspfx Ahhsk