Used Buderus Loganova En20 / Chp Unit for sale (31,610)

Year of construction: 2014, operating hours: 59,436 h, condition: used, functionality: fully functional, machine/vehicle number: 100010336, Buderus Loganova EN20 CHP Unit, 19 kW electric / 38 kW thermal For sale is a Buderus Loganova EN20 combined heat and power (CHP) unit manufactured in 2014. The unit comes from a commercial property in 70567 Stuttgart and is being decommissioned due to an upgrade of the energy supply. Since commissioning, the CHP unit has been regularly serviced as part of a premium maintenance contract. A documented service history is available. °°°Technical Data:°°° * Manufacturer: Buderus * Type: Loganova EN20 * Serial Number: 100010336 * Year of Manufacture: 2014 * Electrical Power: 19 kW * Thermal Power: approx. 38 kW * Fuel: Natural Gas * Fuel Power: 35–56 kW * Electrical Operating Range: 9.5–19.0 kW * Supply Voltage: 400 V * Rated Current: 36 A * Rated Frequency: 50 Hz * Pre-fuse: min. 63 A * Gas Inlet Pressure: 20–65 mbar * Max. Supply Temperature: 85 °C * Max. Operating Pressure: < 6 bar * Device Type: B23 * Protection Class: IP40 * Rated Speed: 1,522 rpm Nwedpfxjzv Sfne Ab Ujl °°°Operating Hours:°°° * 59,436 operating hours * 6,031 start cycles °°°Condition:°°° The unit starts and runs up properly. Currently, there is a fault in the heat exchanger. Based on initial assessment, the heating water pump is defective. The CHP unit is currently out of operation and is being offered with the corresponding repair requirements. °°°Location:°°° 70567 Stuttgart, Germany The planned decommissioning or dismantling is expected to take place between August and September 2026. An inspection is possible after prior arrangement. We will gladly provide additional photos, technical documents, and information on the available service and maintenance history upon request. Sale of a used technical unit in its current condition.

Condition: used, Year of construction: 2005, operating hours: 1,40,000 h, functionality: limited functionality, Name: Used CHP Unit Manufacturer: Köhler / Ziegler Type: SY 53 GSM Year built: 2005 Generator: Leroy Somer Generator Type: LSA 44.27/4 Generator kW: 132 kVA Fuel type: Sewage gas Electrical power: 53 kW Thermal power: 87 kW Driving force: MAN E0836 E302, 6 Zylinder, 56 kW Dimensions: L 3600 x W 950 x H 1750 mm Empty weight: 2200 kg Technical doc.: Yes Nsdpfjwyax Tex Ab Ujwl Message: The Engine was changad in 2013 Condition: Used Price: On demand

Condition: used, Year of construction: 2013, functionality: fully functional, 2 units available, including silencer and gas control unit. Nsdpez D S Ngefx Ab Uowl

Year of construction: 2025, condition: new, functionality: fully functional, Unused, brand new CHP unit with a TOYOTA 4Y engine, all-in-one design, employing a “plug and play” concept for easier and cost-effective installation, a user-friendly interface, a safety module for enhanced hardware protection, and a single-bearing generator to minimize potential engine damage. This 20 kWe CHP unit is ideally suited for locations with a continuous demand for both electricity and heat. The key to CHP’s economic viability lies in utilizing the heat generated in conjunction with electricity production. Nodpfxjzl H Ate Ab Ujwl Product location: Indop, d.o.o., Primorska 6a, 3325 Šoštanj, Slovenia.

Condition: used, Year of construction: 2009, operating hours: 64,000 h, functionality: limited functionality, overall weight: 2,500 kg, fuel type: gas, motor manufacturer: MAN, Köhler & Ziegler MAN GAS Combined Heat and Power Plant (CHP) 54 kW - Leroy Somer Generator We are offering a Combined Heat and Power Plant (CHP) ⭐︎ Condition: The CHP unit is used but in good condition. ⭐︎ Condition: good (used) Fully operational and well maintained! Recently dismantled! The MAN E0834 E302 is a stationary natural gas aspirated engine primarily used in combined heat and power plants (CHP) for the simultaneous generation of electricity and heat. This four-stroke Otto gas engine features a compact design with four cylinders in-line. Manufacturer: Köhler & Ziegler, Germany Engine: - Manufacturer: MAN - Engine type: MAN E0834 E302 - Design: 4-cylinder in-line engine, water-cooled - 4.6 litre - 1500 rpm Generator - Manufacturer: Leroy Somer (Germany) - 90 kW - 3 phase 400 Volt - 50 Hertz - Operating hours: approx. 64,000 hours Dimensions: L:3100 mm x W: 1000 mm x H: 2000 mm Weight: approx. 2500 kg Condition: - Used – Good The generator was used in a publicly accessible building. Regular maintenance was carried out ⭐︎ Further technical data: see photos. Scope of delivery as shown Will be delivered as shown Inspection before purchase is possible and expressly encouraged. All our items are dismantled, cleaned, and visually checked for damages by our qualified personnel before sale. For all item-relevant data/information, please refer to the description and photos. All statements are made to the best of our knowledge and belief. The offered goods are sold as described and inspected. International buyers welcome Please inquire for shipping costs to Europe and overseas #2. Storage Shelf 44-1-8 Scope of delivery: - MAN GAS CHP unit 54 kW - With electrical control cabinet Nwodpfx Ajy Rz N Usb Uel Shipping: - Nationwide transport within Germany is available for an additional charge - To provide an exact freight quote, please send me a request with your ZIP code

Condition: new, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 81159538275956, power: 275 kW (373.90 HP), number of cylinders: 12, rotational speed (min.): 1,500 rpm, overall weight: 1,763 kg, Available MAN based woodgas modules. Available quantity - 23 units. Never used (new) Under separate agreement for potential buyers we offer service of rebuilding these engines to natural gas or diesel specs. MAN V12X-2200  12 cylinders. 29,6 litres displacement  Bore 138 mm, stoke 165 mm  Power 1618 kW MAN V12X-2000  12 cylinders. 24,2 litres displacement  Bore 128 mm, stoke 165 mm  Power 1471 kW MAN V12-1900  12 cylinders. 24,2 litres displacement  Bore 128 mm, stoke 165 mm  Power 1397 kW MAN V12-1650-1800  12 cylinders. 24,2 litres displacement  Bore 128 mm, stoke 165 mm  Power V12-1650-1213kW, V12-1800-1324kW MAN V12-1550-1400  12 cylinders. 24,2 litres di  Bore 128 mm, stoke 165 mm  Power V12/1550-140KW-1213KW, V12/1400-1029KW MAN diesel engines for commercial shipping MAN D3872 (LIGHT, MEDIUM-DUTY OPERATION)  12 cylinders. 29,6 litres displacement  Bore 138 mm, stroke 165 mm  Power 1471 - 1618 kW / 1213 Kw MAN D2862 DUAL FUEL (MEDIUM DUTY OPERTAION)  12 cylinders. 24,2 litres displacement  Bore 128 mm, stroke 157 mm  Power 794kW MAN D2862 (LIGHT, MEDIUM & HEAVY-DUTY OPERATION)  12 cylinders. 24,2 litres displacement  Bore 128 mm, stroke 157 mm  Power 1029-1471 kW / 749-1066kw / 551-735Kw MAN Auxiliary engines MAN D2862 Nwsdpfxsxcudao Ab Usl  12 cylinders. 24,24 litres displacement  Bore 128 mm, stroke 157 mm  Power 600-800kW

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, fuel type: gas, output current: 178 A, output voltage: 6,600 V, output frequency: 50 Hz, continuous power (apparent): 1,976 kVA, motor manufacturer: MWM Deutz, 4 units: Engine: MWM Deutz TBDG 441 BV16, dual fuel, gas, diesel, year 1993. Spare parts also available for sale, including turbochargers, injection pumps, cylinder heads, crankshafts, etc. 2 units: Generator: AVK 6600V 173A 50Hz, control unit. Nwodpfx Absy Hmhbe Uol

Condition: used, Year of construction: 2008, Name: Used CHP Unit Manufacturer: SEnergie GmbH Nwsdoy Am Rnepfx Ab Ujl Type: G6.12TI Year built: 2008 Generator: NEWAGE STAMFORD Generator Type: UC.I274D2 Generator kW: 100 kW Fuel type: Sewage gas Electrical power: 80 kW Thermal power: 123 kW Efficiency: 88,9 % Dimensions: L 3.500 x W 1.100 x H 2.500 mm Empty weight: 3.000 kg Technical doc.: Yes Message: In 2018 a new engine was installed and the generator was rewound. Last service on October 15. 2021 with 86.102 hours. Accessories: A switch cabinet Condition: Second hand Price: On demand

Condition: new, Year of construction: 2026, power: 180 kW (244.73 HP), number of cylinders: 12, cubic capacity: 25 cm³, nominal power: 200 kW (271.92 HP), Thermal output 320 kW Nedpoy Urx Uefx Ab Uewl

Condition: used, (14) Unused Man UPB 12-L-W-E3262E302 CHP cogeneration units with capacity 130kWel and 226 kWTh made in 2022 and designed to be fed by wood gas. Project was dropped so the equipment was never installed or commissioned. Plant includes the following major equipment: - Man 12 cylinder engine rated 273 kW, 50Hz, 1500 RPM Nwjdpfx Abjyhc T Ij Uol - Marelli MBX-E 250 MA4 generator rated 169 kVA, 400V, 50Hz, 1500 RPM - AFR Air-Fuel Ratio control system by Motortech - Generator control system by ComAp (14) units available.

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: KOG 130, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 150 kW (203.94 HP), continuous power: 130 kW (176.75 HP), rotational speed (max.): 1,500 rpm, motor manufacturer: MAN, type of cooling: water, A cogeneration plant on wood biomass KOG130_00 with equipment was designed to convert solid fuel into gaseous fuel. In the process, the produced gas is cleaned and cooled, after which it is forwarded to the internal combustion engine of the cogeneration plant. For solid fuel, natural wood chips of class G50-G100 are used. CHP line is equipped with containerized MAN UPB -L-W-E3262E302 Woodgas genset. Nwedpeywgp Hefx Ab Ujl

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 37,000 h, controller model: Siemens Sinumerik 840 D, laser power: 3,200 W, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 115 mm, TECHNICAL DETAILS Laser power: 3,200 watts Travel range, X-axis: 2,500 mm Travel range, Y-axis: 1,250 mm Travel range, Z-axis: 115 mm Sheet thickness, structural steel max.: approx. 20 mm Sheet thickness, stainless steel max.: approx. 15 mm Sheet thickness, aluminum max.: approx. 8 mm MACHINE DETAILS Control system: Siemens Sinumerik 840 D Total connected load approx.: 88 kVA Machine hours: 74,000 h Beam hours: 37,000 h Dimensions & Weight Footprint: 8,660 x 6,110 x 2,700 mm Machine weight: approx. 7,300 kg EQUIPMENT Closed machine frame with integrated laser unit Automatic pallet changer TFT color screen Positioning laser diode Spray device Motion unit for high-precision machining Additional high-dynamic Yp axis Drives with maintenance-free three-phase servomotors Closed beam guidance Conveyor for small parts and waste TRUMPF laser CO2 laser TruFlow 3200 High-frequency excitation Nwjdpsz A D Irofx Ab Usl Low-maintenance turbo radial blower Gas mixer (integrated) Laser power control Laser logbook function Laser cutting head with 5" lens Laser cutting head with 7.5" lens Universal quick-change device ControlLine Control system SINUMERIK 840D Automatic shut-off ContourLine SprintLine Teleservice Microweld RJ45 network connection Network connection via telediagnostics CE marking Light barriers Multi-chamber extraction system Compact dust collection system

Condition: used, pressure: 5.5 bar, input voltage: 230 V, nominal heat output: 380.2 kW (516.93 HP), heating capacity: 373.8 kW (508.23 HP), temperature: 110 °C, tank capacity: 680 l, input frequency: 50 Hz, operating pressure: 5 bar, We are offering this used Buderus Centra 1740 B2 heating and fan unit, year of manufacture unknown, for sale. Maximum firing heat output Qn (H): 373.8 kW Nominal heat output Pn 50/30 °C gas: 366.0 kW Nominal heat output Pn 80/60 °C gas: 380.2 kW Nominal heat output Pn 50/30 °C oil: 364.8 kW Nominal heat output Pn 80/60 °C oil: 364.8 kW Operating pressure pMS: 5.5 bar Test pressure PT: 7.9 bar Maximum temperature Tmax: 110 °C Volume: 680.0 l Nominal voltage: 230 V Nominal frequency: 50 Hz Nwjdpfxoz Eiwdj Ab Uel Nominal current: 10.0 A If you have any questions or require further information, please feel free to send us a message or call us.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, power: 920 kW (1,250.85 HP), overall weight: 3,465 kg, total width: 1,281 mm, total length: 2,606 mm, total height: 1,595 mm, pressure: 6 bar, nominal heat output: 920 kW (1,250.85 HP), temperature: 183 °C, tank capacity: 801 l, fuel: liquefied natural gas (LNG), operating pressure: 6 bar, Equipment: documentation/manual, For Sale: Full working and complete Industrial Gas Boiler System Buderus Logano GE615 – 920 kW | 2023 | Excellent Condition High-performance industrial heating system for sale, commissioned at the end of 2023 and operated for only two heating seasons (2023/2024 and 2024/2025). The system is currently fully operational and can be inspected and tested under working conditions. Sold as it is with all the hardware including stainless steel chimney, electrical distribution panel and complete interior fittings included in the price. The installation was professionally executed and regularly maintained. The system is in excellent technical condition with no leaks, corrosion, or structural defects. The boiler can be adapted for alternative fuel operation (e.g. LPG or oil) subject to burner configuration and technical adjustment. Main Configuration: Boiler Buderus Logano GE615 – 920 kW Nominal output: 821 – 920 kW Number of sections: 13 Flue gas temperature: 139 – 183 °C Nwodpfx Aoy Tp Evob Ujl Length: 2606 mm Width: 1281 mm Height (without control unit): 1595 mm Flue connection: 360 mm Weight: 3465 kg Burner: *Weishaupt VW-G 10/4-AZM Gas Burner Control System: *Bosch CC8311 Control Unit Circulation Pumps: *2 × Wilo Yonos MAXO 80/0.5-12 Technical Specifications: Type: Industrial cast iron gas boiler Fuel: Natural gas/Diesel Condition: Fully operational Year of installation: 2023 Operating period: 2 heating seasons only Inspection and live test possible on site Suitable Applications: Hotels Hospitals Manufacturing facilities Administrative buildings Schools Greenhouses Logistics and industrial centers Additional Information: Automation and circulation pumps included Dismantling and transport can help with logistics Sale as a complete boiler room system Price EUR 58,000 EXW plus VAT Contact G. Jordanov Location: Ruse,Bulgaria

Year of construction: 2004, condition: good (used), We are selling a used, stationary, atmospheric gas boiler, Buderus Logano G334 XZ, with a rated heat output of 110 kW. The boiler is suitable for heating larger commercial, industrial, or residential buildings. It has a robust cast iron construction and was manufactured in Germany. Technical specifications: • Manufacturer: Buderus Heiztechnik • Model: Logano G334 XZ • Year of manufacture: 2004 • Rated heat output: 110 kW • Rated heat input: 119.7 kW • Maximum operating pressure: 4 bar • Test pressure: 5.8 bar • Maximum operating temperature: 120 °C • Water volume in the boiler: 51 liters • Fuel: natural gas G20 • Electrical connection: 230 V / 50 Hz • NOx class: 5 • Approximate weight: 496 kg • Country of manufacture: Germany The boiler is sold in its current condition, including the components shown in the photos. Inspection is possible by prior arrangement. Nsdpfszuunpjx Ab Uswl Location: Bratislava, Slovakia Availability: Immediate Dismantling, loading, and transportation are the responsibility of the buyer. The price is for 1 unit, and a discount is possible for a quick transaction.

Condition: excellent (used), Year of construction: 2008, Boiler Buderus GE315 Output:170kw Burner: oil or gas Weishaupt burner available on request Viewing by telephone only! Preferential sale to dealers, tradesmen or export. All information without guarantee, subject to errors and prior sale. The seller assumes no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible Njdpfjmnqcmex Ab Uowl

Condition: like new (used), Year of construction: 2022, Reda STERILDOSE aseptic dosing unit Njdpsyil A Sefx Ab Uowl Can be used as aseptic doser for dosing of any components into milk, juice and other beverages products Capacity: 3000 l/h New condition Dimensions LxWxH: 2650x1800x2230mm Location - Poland

Condition: excellent (used), Year of construction: 2007, Buderus SB735 low temperature boiler Year: 2007 Nwsdpfxonr Ek Uo Ab Uel Output: 1200Kw Burner: Weishaupt oil or gas burner on request

Condition: good (used), Year of construction: 2018, 0 40 kW air pressure 5 bar range L-W-H 2850 x 2470 x 2290 mm weight 7.000 kg External grinding, internal grinding, hard turning, measurement DVS UGrind – Incredibly impressive. – Efficient complete machining with grinding, turning and measuring tools on a single multifunctional head – Ideal for small to medium batch sizes of shafts and chuck components with a centre-to-centre distance of up to 1,200 mm – Machine bed made of natural granite for high dynamic and thermal rigidity – Consistently precise machining results thanks to a hydrostatically supported tailstock – Faster achievement of targetdimensions thanks to the intuitive DVS UCee operating system – Footprint of just 7 or 8.5 m²,including coolant system. --> BUDERUS, Type: U-Grind 800 --> Control system: Bosch Rexroth MTX, IndraControl L45.1, 15" display --> Centre distance: 1.200 mm --> Max. outer diameter: 350 mm --> Max. workpiece weight between centres: 50 kg - Cross slide: X-axis - --> max. travel: 500 mm --> max. speed: 30 m/min --> resolution: 0.1 µm - Longitudinal slide: Z-axis - --> max. travel: 800 mm --> max. speed: 30 m/min --> Resolution: 0.0005 – 0.1 mm - Multifunction head (B-axis) - --> Swivel range: -45° to +225° --> Swivel time for 180°: Positioning accuracy: 0.0002° --> Repeatability: 1" --> Resolution: 0.001° - External machining - --> Max. machining length: 750 mm Nedpfxsz Ek Abs Ab Uowl --> Peripheral speed: 50 corundum / 80 CBN --> Drive power: 15 kW --> Max. wheel dimensions: Ø400 x 50 x 152.4 mm - Internal machining - --> Max. bore diameter: 250 mm --> Max. bore depth: 235 mm --> Drive power S1: 1.8 – 7.5 --> Speed range: 30.000 to 50.000 rpm - Workpiece spindle C-axis - --> Max. speed: 1.500 rpm --> Drive power: 1.8 kW --> Drive torque: 90 Nm --> Measuring system resolution: 0.001° --> Roundness accuracy: 0.8 µm --> Positioning accuracy: 0.0001° - Tailstock - --> Quill stroke: 50/80 mm --> Quill diameter: 60 mm --> Bearing: hydrostatic --> Fine adjustment for cylindricity corrections: ±40 µm - 3-point centre - --> Clamping range: Ø20 – Ø150 mm --> Coarse adjustment: 40 µm --> Fine adjustment: 2 µm --> Feed rate: infinitely variable Highlights: > Complete machining in a single set-up. Turn whatever can be turned; grind whatever needs grinding. > Short set-up times, quick to programme – a machine that’s a pleasure to work with and gets the job done quickly. > Intuitive and ergonomic: good accessibility, crane loading, intuitive operation via touchscreen and ready-made programme modules. > Compact footprint thanks to integrated coolant treatment > Optional automation solutions: with our ULoad or a customised solution, for example from rbc robotics, the DVS UGrind can also operate fully automatically.

Condition: used, Year of construction: 2009, CNC series 245 A 3l T R DH, control system, manufacturer: Siemens, type: Sinumerik 840D SL, 2 spindle units (1x external type WMZ; 3x internal, manufacturer: GMN, type HSX 150-24.000/23 with tool holder HSK 63; grinding spindle turret), 2 cross slides, 2x C-axis, 2x magnetic chucks Ø 800 mm, workpiece Ø max. 1,000 mm, workpiece length max. 400 mm, spindle speeds max. 1,000 rpm, table travel X1/X2 axis 885 mm, table travel Z1/Z2 axis 1,000 mm, 4 table levelers, electronic balancing system MPM, coolant system, manufacturer: Liqui, type KSS system MTBF V500, MW250, capacity 1,900 l, band filter, temperature control, manufacturer: Hyfra, chip conveyor, switchgear and control cabinets, platform, table system, 5-piece, 3 drawer cabinets, 5 drawers, contents: setup tools, machine accessories. Nsdpfx Abjzgvlyj Ujwl

Condition: excellent (used), Year of construction: 2011, Buderus GB312 gas condensing boiler Output: 160Kw Viewing by telephone only! Preferred sale to dealers, traders or export. All information without guarantee, subject to errors and prior sale. The seller accepts no liability for typing and data transmission errors. Of course we also take care of all formalities Nwjdpfemnqb Eox Ab Uol Loading possible

Condition: used, machine/vehicle number: FN535356, Year of construction: 2017, operating hours: 3,483 h, load capacity: 3,500 kg, lifting height: 3,600 mm, fork length: 1,800 mm, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,500 kg Lifting height: 3,600 mm Fork length: 1,800 mm Lifting mechanism Mast design: Duplex mast Mast type: Free-lift mast without a central hydraulic cylinder MACHINE DETAILS General Year of manufacture: 2017 Operating hours: 3,483 h Drive type: LPG Dimensions and weight Own weight: 4,896 kg Overall length: 5,700 mm Overall width: 1,300 mm Overall height: 2,420 mm Maintenance and inspection UVV certificate valid until: Next service due in: 516 h Starter battery: new (?) Previous owner: former Jungheinrich full-service unit EQUIPMENT Side shifter 3rd valve Full cabin Heater Windshield wiper LED work light (front) LED work light (rear) Nwodpfx Aszz Hryeb Ujl Comfort seat LPG cylinder exchange system

Condition: used, Year of construction: 2010, operating hours: 3,426 h, functionality: unexamined, pressure: 6 bar, power: 12,600 kW (17,131.21 HP), temperature: 110 °C, operating temperature: 110 °C, total height: 3,025 mm, total length: 6,315 mm, nominal heat output: 12,600 kW (17,131.21 HP), total width: 2,724 mm, insulation thickness: 100 mm, tank capacity: 18,300 l, We offer this Buderus S825L-12600 hot water boiler, in very good condition, manufactured in 2010. Type: S825L-12600 Maximum permissible pressure: 6 bar g Test pressure: 9.6 bar g Nwsdpfxezlqb To Ab Uol Maximum permissible temperature: 110 °C Nominal thermal power: 12600 kW Total volume: 11830 l Serial number: 31022150-00-106809 Month/year of manufacture: 08/2010 Manufacturer: Bosch / LI LA If you have any further questions or require more information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2020, operating hours: 48,000 h, functionality: fully functional, machine/vehicle number: 2215770, type of input current: three-phase, power: 1,030 kW (1,400.41 HP), input voltage: 400 V, fuel: domestic gas H, overall weight: 12,520 kg, type of cooling: water, nominal power: 999 kW (1,358.26 HP), input frequency: 50 Hz, input current: 1,442 A, empty load weight: 11,730 kg, temperature: 25 °C, ambient temperature (max.): 25 °C, Equipment: documentation/manual, We are offering this Caterpillar 2020 combined heat and power (CHP) unit, manufactured in 2020, complete with gas cooling, gas control system, and oil tanks. Manufacturer: MWM Serial number: 1655973 Date of manufacture: 06/2020 Rated power: 1030 kW Rated power factor: cos phi 1.0 Rated frequency: 50 Hz Rated voltage: 400 V Rated current: 1442 A Weight: 11730/12520 kg Performance class: G2 Fuel: Biogas Standard: ISO 8528-5 Made in: Germany If you have any questions or require further information, please do not hesitate to contact us. Nedjzwqczepfx Ab Uewl

Year of construction: 2018, condition: used, overall weight: 10,000 kg, total length: 2,300 mm, total width: 6,500 mm, total height: 2,400 mm, BUDERUS CNC 235 – CNC Grinding and Machining Center Machining / Spindle 2 machining areas / channels Nedpfx Abozwa Rho Uewl Max. machining length: 150 mm Max. swing diameter: Ø 310 mm Workpiece spindle speed: 0–3,000 rpm Spindle bore: Ø 45 mm Workpiece spindle positioning via C-axis Table speed X/Z: 0–30 m/min Motor Spindle WMZ / DVS Type: GS 205-045/17 Year of manufacture: 2014 Automation Automatic workpiece feed / conveyor system Coolant / Filtration System LIQUI-Filter GmbH System: UR1060 / MW260 / Gamma 13 Tank capacity: 2,400 l Year of manufacture: 2015 Cooling System HYFRA gamma 13-F-S Cooling capacity: 13 kW at 32 °C Year of manufacture: 2015 Measuring Technology JENOPTIK post-process measuring technology Year of manufacture: 2018 Supply Data 3 × 400 V / 50 Hz Installed power: approx. 45 kW Compressed air requirement: 15 Nm³/h at 5 bar Control: Siemens SINUMERIK 840D Travel Z-axis: 300 - mm Workpiece diameter over bed max.: 150 mm Weight approx.: 10,000 kg Dimensions (LxWxH) approx.: 2300 x 6500 x 2400 mm Travel X-axis: 1240 - mm Year of construction: 2,018 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: Free loading on truck under power: No