Used Burkert Burkert Fluid Control Systems Flow Meter for sale (65,929)

Condition: used, Burkert fluid control systems flow meter Pipe size: DN 65 Control system type: SE 56-B1D1B1A40 Flow meter type: SO 56-T65-3A1B Lhjdpfxswyfx Eo Ahtjk VMA Wekerom See our other ads

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, FLOW & THERMAL Regenerative Thermal Oxidizer (RTO), 18,000 Nm³/h (2021) Complete industrial system for the treatment of process water containing Volatile Organic Compounds (VOCs), consisting of stripping columns and a three-chamber Regenerative Thermal Oxidizer. Manufactured by Flow & Thermal Solutions / TECAM in 2021, the equipment was installed at a PET production plant and remained operational until the factory closed on 27 November 2025. The system removes VOCs from the water by means of air stripping and subsequently destroys them in the RTO through high-temperature thermal oxidation. Heat recovery through ceramic media helps reduce natural gas consumption. Main features • Manufacturer: Flow & Thermal Solutions / TECAM • Year: 2021 • Serial number: F002 • RTO nominal capacity: 18,000 Nm³/h • Configuration: three-chamber regenerative RTO • Fuel: natural gas • Honeywell / Eclipse TJ 200 burner • Burner output: 58–586 kW • Electrical supply: 400 V, 50 Hz • Electrical power stated on the nameplate: 40 kW • 30 kW Soler & Palau ATEX main fan • Siemens PLC automation with HMI touchscreen • LEL monitoring, purge, dilution, bypass and pneumatic valve systems • Vertical stack: 10 m high, diameter: 800 mm • CE marked Performance and operation The equipment operated at actual flow rates close to its nominal capacity, with recorded values ranging from approximately 16,400 to 17,900 Nm³/h. The latest available emissions test, carried out by DEKRA in December 2023, recorded the following values: • TOC: 13 mgC/Nm³ • NOx: 3–4 mg/Nm³ • CO: 125–153 mg/Nm³ During the tests, the equipment operated at an approximate temperature of 775–780 °C, with a treated water flow rate of 3.5 m³/h. Ledszvcknspfx Ahtshk Stripping columns The system includes: • Original stripping column, designed for approximately 6 m³/h. • Second Tecnium SLFKK9 stripping column, manufactured in PPH, with a nominal capacity of 8 m³/h and a maximum capacity of 10 m³/h. The second column was installed, but it is currently dismantled and lying on the ground after being knocked down by strong winds during the winter. It has a hole in the base which, according to the available information, is considered potentially repairable. The Tecnium column is equipped with internal packing, distributors, a mist eliminator, connections, drainage and provisions for integration with the existing control system. Condition and maintenance The system remained operational until the final closure of the plant in November 2025. The latest preventive maintenance was carried out by TECAM in June 2025 and included mechanical and electrical inspection, burner, fans, stripping columns, instrumentation, valves and functional testing. The equipment was operational, although maintenance work is required before recommissioning, mainly involving: • Process valves • Internal insulation of the towers • Ductwork and seals • Main fan impeller and expansion joints • Repair of the base of the second stripping column TECAM technical documentation is available regarding the recommended works, and several spare parts are also available. Scope of supply The system includes: • Three-chamber RTO • Combustion chamber • Burner and gas train • Main fan • Two stripping columns • Dilution and purge system • Hot bypass • LEL analysers • Stack • Ductwork • Electrical cabinets and controls • Platforms, ladders and support structures • Available spare parts

Year of construction: 2013, condition: good (used), For Sale: Well-maintained in-line system for use behind a Multivac packaging machine. This in-line system ensures a transition from 4 tracks to 1 track and subsequently passes through a metal detector with an ejector. Brand: Automation Systems BV Type: Automation Systems BV in-line robot with a Mettler Toledo metal detector with ejector Robot type: BCE001 Year of manufacture: 2013, voltage: 400 V, 16 A It is possible to inspect this machine on-site. - Transport can be arranged. - Export documents will be provided if necessary. Lhjdpfszt Ib Tex Ahtjk - Proper loading is included. If you have any questions or comments, please do not hesitate to contact us.

Condition: used, This listing is for the Quattroflow QS15SU Fluid systems pump The unit is in full working condition and is ready for immediate use The Quattroflow 15SU is a 4-piston Diaphragm pump, which is mainly used to pump water-like fluids that are typically handled in research-, pilot plant- or production facilities of the pharmaceutical, biotech, food or cosmetic research centres or plants. Examples: Solutions containing proteins (albumin, IgG, Clotting factors, monoclonal antibodies, enzymes, vaccines.) Solutions of polymers or suspensions (silicon, latex, chromatography media) Cell suspensions (bacteria, yeast, algae, fungi, mammalian cells) Lsdpoxl Er Hsfx Ahtjhk colloidal solutions Suspensions of viruses or phage Dairy products Gelatine Supplements and ingredients for cosmetic and food

Condition: excellent (used), I am offering for sale an Agilent Technologies Systems Controller, model 86030-30011. This is an industrial computer designed to work with Agilent's measuring and laboratory equipment. The device is housed in a robust, rack-mountable metal enclosure. Inside, there is a PC equipped with, among other things, a CD-ROM drive and a 3.5" floppy disk drive. Numerous communication ports are available on the rear, allowing it to interface with laboratory devices. Technical specifications: Manufacturer: Agilent Technologies Model: 86030-30011 Serial number: 50860C05 Power supply: 115/230 V AC Frequency: 50/60 Hz Current consumption: 10 A / 5 A Year of manufacture: 2009 (according to the nameplate) Connectors: LAN (RJ-45) VGA PS/2 (keyboard and mouse) COM (RS-232) LPT DAS 1800 interface Additional industrial/specialized connectors Visual condition: Normal signs of use in the form of minor scratches and dirt on the enclosure. The inside of the device appears to be complete. There is a sticker indicating an electrical inspection performed in 2014. Sold without any additional accessories, cables, or software. Lhedpozl Hz Ajfx Ahtok Included: Agilent Technologies 86030-30011 Controller – exactly as shown in the pictures.

Year of construction: 2022, condition: used, functionality: fully functional, machine/vehicle number: 3352, RAMPF dispensing system with MS-S mixing system (static) Material used: Rampf RAKU PUR 21-2080-1, component A and component B The dispensing head has been extended with a Y-shaped slide. - Manual adjustment for the mixing system - RAMPF mixing system MS-S (static) - Pressure monitoring for component A + B - Material pressure tank 50 l for component A - Level monitoring for component A + B - Material recirculation to the dispensing pump for component A and B - Material evacuation for component A - Vacuum pump 25 m³/h - Waste container 60 l with pipe Lodpfxezgck No Ahtohk -> The collection trays have been replaced with mobile containers. - Trolley for waste or rinsing container - Container frame/machine frame, 3-part - Work table approx. 1,400 mm x 500 mm with table top - Transfer station for lid drum, component A - Transfer station for bung hole drum, component B - Dispensing control (Siemens PLC control based on S7-300) - Precision piston dispensing pump for component A and B - Positive displacement metering pump A, component, 257 ccm - Positive displacement metering pump B, component, 64 ccm --> 1 x spare positive displacement metering pump A and positive displacement metering pump B are included. These have been reconditioned by Rampf as an exchange unit. (see picture) Note: The potting system is located at our site in Austria.

Condition: excellent (used), For sale: Sterling Fluid Systems ZTIC 040160 industrial pump with Siemens 3kW motor. A robust, professional unit designed for use in industrial installations, water circuits, and technological systems. ⚙️ Technical specifications: - Pump manufacturer: Sterling Fluid Systems - Model: ZTIC 040160 - Type: AA ODC B2 KX - Motor: Siemens IE1 - Power: 3.0 kW - Voltage: 230/400V (3~) - Frequency: 50 Hz - Speed: approx. 2835 rpm - Protection class: IP55 - Insulation class: F - Connection: flanged 🛠️ Features: - Centrifugal pump for water and industrial liquids - Heavy-duty industrial construction - Reliable Siemens motor - Flanged version – easy installation in piping systems - Designed for continuous operation 📦 Condition: ✔️ Used ✔️ Very good technical condition ✔️ Freshly painted ✔️ Normal signs of use visible 📌 Applications: - Industrial systems - Heating and cooling systems - Water circulation - Manufacturing plants Lhjdpfx Aoyz Dxmehtek - Agriculture 📦 Set includes: - Pump with Siemens motor - As shown in the photos 🚚 Shipping: - Shipping by courier or pallet possible - Personal collection also available - Assistance with transport arrangements is offered

Year of construction: 2023, condition: new, functionality: fully functional, machine/vehicle number: B1JAU25/95, DN400 Ball Valve Assembly + Pneumatic Actuator (Valmet / Neles) 1) Description Manufacturer: Valmet Flow Control (Neles brand) Valve: M1JW400ASGA – Trunnion-mounted ball valve, PN10, DN400, body CF8M (AISI 316), graphite packing Actuator: B1JAU25/95 – Single-acting pneumatic actuator (spring to open), ISO 5211 / VDI/VDE interface, size 25, shaft bore Ø95 mm Mounting Plate: QX35K05HDM – Neles interface for valve/actuator coupling Year: 2023 Condition: New / never installed, stored in original wooden crate (photos available) Compliance: CE marking (ATEX if applicable to control accessories – see nameplate) 2) Construction & Materials Body: Stainless steel casting 1.4408 / CF8M Type: Trunnion-mounted quarter-turn ball valve (low operating torque, low ΔP) Seats / Packing: Graphite (for severe service, high temperature resistance, low friction) Flanges: industrial drilling (details available on request) 3) Performance (indicative / to be confirmed by serial datasheet) Lhsdpfx Ahoyhxppetsk PN: 10 (body marked PN16 on associated part; can be delivered as PN10) Nominal diameter: DN400 Service: industrial fluids, air/gas, low-pressure steam, chemical/energy process, heavy-duty HVAC Mounting: single-acting actuator (spring fail-safe → opens in case of air supply failure) 4) Scope of Supply Complete pre-assembled valve with B1JAU25/95 actuator QX35K05HDM mounting plate Control block (solenoid valve/filtration/regulation) visible in the photo Wooden crate + protective materials 5) Applications Compressed air units / boosters (line isolation/bypass) Industrial processes (chemicals, energy, paper mills, incinerators, cement plants) Large flow industrial HVAC networks

Condition: used, This listing is for the Akta crossflow filtration system Ledpjxhf A Rsfx Ahtjhk The unit is in full working condition and is ready for immediate use An ÄKTA Crossflow filtration system is a type of tangential flow filtration (TFF) system developed by Cytiva (formerly GE Healthcare). It's used primarily in bioprocessing and biotechnology applications to concentrate, diafilter, or clarify biological samples such as proteins, viruses, plasmids, and other biomolecule Core Functions: Concentration – Reducing the volume of a sample while retaining the target biomolecule. Diafiltration (Buffer Exchange) – Removing salts or changing the buffer environment by continuously adding a new buffer while removing permeate. Clarification – Removing particulates or cells from process fluids Key Components: Pump Modules: Typically peristaltic pumps that manage flow rates precisely. Filtration Cassettes: Hollow fiber or flat sheet membranes for ultrafiltration or microfiltration. Pressure Sensors: To monitor and control transmembrane pressure (TMP). Conductivity/pH/UV Detectors: For in-line monitoring of the filtrate and retentate. Benefits: Automation reduces operator error and variability. Scalable design for seamless transition from lab to production. Precise control of filtration parameters (flow rate, pressure, volume). CIP (Clean-In-Place) capabilities for easy maintenance and compliance with GMP. Common Applications: Protein concentration and buffer exchange Viral vector purification Plasmid DNA purification Cell harvest and clarification

Condition: ready for operation (used), Year of construction: 2000, A customized industrial Sartorius crossflow membrane filtration system is available. Filtration process: tangential flow filtration, design: skid, construction: stainless steel, nominal capacity: 4000l/h, membrane modules: 24, membrane area: 12.5m²/module, total membrane area: approx. 300m², pore size: 0.2µm, max. operating temperature: 95°C, operating pressure: 3bar, connected load: 35kVA, control system: Siemens SIMATIC S7-300. The pneumatic valve islands were replaced in 2023. Documentation available. An on-site inspection is possible. Lhsdpfx Ahozlt Nmotok

Year of construction: 2020, condition: ready for operation (used), functionality: fully functional, For sale: MAHLO Qualiscan QMS / WebPro M industrial measuring and quality control system, manufactured in 2020. The system is designed for continuous measurement and quality monitoring of web materials in industrial production processes. Technical data: Manufacturer: MAHLO GmbH + Co. KG Type / Model: QMS WebPro M Year of manufacture: 07/2020 Serial / factory no.: 01010134 / 013673 Power supply: 230 V, 1L/N/PE Frequency: 50/60 Hz Protection class: IP43 Made in Germany Equipment included / visible MAHLO WebPro M measuring frame Traversing measuring system Measuring heads / sensors Ledpszuc Uwofx Ahtjhk TEXTEST FX 3500-X20 sensor Electrical control cabinet Large HMI operator panel Control system Pneumatic components Cabling and installation components The system comes from a professional industrial production facility. The machine is offered as a complete system as shown in the photos. Condition: Used (for very short time, hence like brand new), visually in very good condition. Additional photos and technical information are available upon request. Please contact us for further information.

Condition: used, functionality: fully functional, The 16-channel FT2M control system from MTS was in use until recently and is now for sale. All 16 system cables for 16 control channels—force, displacement, and servo valve—are included. Lhodowv Uqiepfx Ahtsk PC and system software are included. Equipment: 16 pcs: Dual Valve Driver Board 497.26 16 pcs: AC Amplifier Board AC Cond 497.13B 16 pcs: Dual DC Amplifier Board 497.22C 4 pcs: 497.01 Analog Chassis (19" rack) 4 pcs: Power supply +-15V/+5V 4 pcs: Station Control Card 497.34 4 pcs: RS232 Communication Card 497.36 1 pc: Hydraulic Control Panel 497.05 for 4 stations 1 pc: Global Resources III Card 498.71B 4 pcs: ADDA Card 498.65 2 pcs: PROC CPU 498.96-3

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Professionally designed crossflow ultrafiltration membrane system, engineered, built, and fully instrumented by a membrane specialist. 12 membrane modules in 3 parallel stages of 4 modules each, active membrane area 2.16 m². PVDF ultrafiltration membranes, separation limit 100 kDa, in PVC module tubes. Membrane stages can be individually shut off. Designed for diafiltration and pure concentration. Hygienic centrifugal pump, approximately 11 m³/h at approximately 2.5 bar feed pressure, crossflow up to 2.5 m/s. Retentate-side pressure adjustment via automatic proportional valve, stainless steel heat exchanger for temperature control. Ideally operated in conjunction with two feed tanks. Technical data: - Total membrane area: 2.16 m² (12 modules, 3 stages of 4) - Membrane type: PVDF-UF, separation limit 100 kDa; module tubes PVC, stages can be individually shut off - Circulation rate: approx. 11 m³/h at approx. 2.5 bar; crossflow up to 2.5 m/s - Permeate rate: 20–120 l/h·m² (depending on suspension/concentration) - Interfaces: Inlet/Outlet, each DN50 (DIN 11851) - Instrumentation: Flow rate (feed/permeate), pressure and temperature sensors, proportional valve, stainless steel heat exchanger - Commissioned in June 2023; well-maintained, operational condition, regularly CIP-cleaned (last cleaning on 02/02/2026) More systems and equipment are continuously being offered for sale from a laboratory and pilot plant liquidation – inquiries are welcome. Lhjdpozmapvofx Ahtsk Sold on behalf of the client through the Köck auction house. Located in eastern Austria, exact address upon request. Collection/dismantling by the buyer.

Condition: excellent (used), For sale: a complete, professional magnetic particle testing (MT/NDT) kit from the renowned brands Tiede and Blak-Ray, used in industrial quality control, welding, rail transport, and the energy sector. The equipment is fully operational and in very good technical and visual condition—ready for immediate use. The set includes: • Tiede FSM-2 – magnetic field strength meter (Feldstärkemessgerät), measuring range ±400 A/cm, 9 V DC power supply • Blak-Ray J-221 – professional long wave ultraviolet meter for UV lamp verification in NDT applications • Field Indicator MAGNAFLUX – magnetic field indicator for quick induction checks • Measurement probe with cable • Calibration specimen and auxiliary accessories • Glass cylinder for indicator fluid • Original transport case with protective foam Applications: Lhedpfoxl Dbtjx Ahtsk • Weld seam inspection • Shaft, axle, and machine component examination • Testing of railway, energy, and aviation parts • Quality control in industrial production

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, controller manufacturer: Haas, overall weight: 3,250 kg, spindle speed (max.): 7,500 rpm, number of spindles: 1, number of slots in tool magazine: 20, Equipment: documentation/manual, 3-axis machining center Manufacturer: Haas Type: VF-1 / VCE-500 Year of manufacture: 09-1998 Control: Haas (retrofit) Lhodpozu Stvefx Ahtjk Operating hours: unknown S/N: 16XXX Technical data: ----- - Table size: 660 x 356 mm - Travel ranges X-Y-Z: 508 x 406 x 508 mm - Spindle: max. 7,500 rpm - Spindle power: 11 kW - Tool holder: SK40 - Tool magazine with 20 stations - Coolant system - Programmable coolant nozzle - Chip conveyor - Footprint L x W x H: 2.60 x 2.30 x 2.50 m - Weight: approx. 3.2 t Accessories: ----- - Documentation - SK-40 holder set Special features: ----- - Retrofitted with newer Haas control! - In excellent condition.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 9,000 h, functionality: fully functional, machine/vehicle number: 714000-1, type of input current: three-phase, input voltage: 400 V, table length: 7,000 mm, table width: 2,000 mm, power: 36.77 kW (49.99 HP), Flow Waterjet 714000-1 Flying Bridge 7x2 meters Year of manufacture: 2010 60,000 PSI 9,000 hours Complete and in good working condition Various wear parts such as pipes and extra nozzles Lhedpfxjxwtu Ts Ahtjk Abrasive hopper Abrasive feeder Immediately available Waterjet cutter Flow Waterjet Flowcut Waterjet cutting OMAX CNC plasma Hypertherm Laser fiber laser bystronic Amada Trumpf Accurl Bodor HSG JQ Nukon

Condition: good (used), Year of construction: 2005, Console table with vacuum suction plate New control system installed in 2022 (price: €9,000) Control program: Xilog Plus X-axis between stops: 2500 mm Lhedpfx Ahozhgz Ietjk Y-axis with milling: 1240 mm Y-axis with drilling: 1080 mm Z-axis: 200 mm (max. workpiece height: 100 mm) Main spindle HSK 63 with 6.5 kW, up to 24,000 rpm 4 tool changers at the front 4 tool changers at the rear Drilling unit External dimensions: 5.8 x 2.8 m

Condition: used, This listing is for a Millipore Pro Flux M30 Tangential Flow Filtration (TFF) System. The unit is in full working condition and is ready for immediate release. The Millipore Pro Flux M30 is a high-performance tangential flow filtration (TFF) system designed for demanding applications in the biotechnology, pharmaceutical, and molecular diagnostics sectors. Optimized for crossflow filtration, the M30 provides reliable separation, concentration, and clarification of biomolecules and cell suspensions in both R&D and process-scale environments. With its robust stainless steel construction, precise transmembrane pressure (TMP) control, and compatibility with a wide range of membrane chemistries, the M30 delivers consistent performance across various filtration tasks—from protein concentration and virus clarification to cell culture harvest and synthetic biology sample prep. Key Features Stainless Steel Construction – Durable, sanitary design for aseptic operation and long-term reliability. Optimized TMP Control – Ensures maximum membrane efficiency and longevity through precise pressure regulation. Broad Membrane Compatibility – Supports a variety of membrane types and molecular weight cut-offs for flexible application use. Process Versatility – Suitable for concentration, diafiltration, and clarification steps in upstream and downstream workflows. Compact & Scalable – Ideal for laboratory-scale operations with scalability to pilot and production environments. Lhodpfx Asxl Dx Sohtek User-Friendly Interface – Intuitive controls and gauges for straightforward operation and monitoring. Technical Specifications Model: Pro Flux M30 Flow Configuration: Tangential Flow / Crossflow Material of Construction: 316L Stainless Steel Pump Type: Peristaltic or Diaphragm (depending on setup) Pressure Control: Manual and/or automated transmembrane pressure regulation Operating Pressure Range: Typically up to 4 bar (60 psi) Filter Compatibility: Millipore Pellicon, Ultracel, Durapore, and other cassettes Tubing & Fittings: Sanitary-grade with tri-clamp or Luer lock connections Footprint: Compact benchtop design Manufacturer: Millipore (now part of Merck Millipore) Applications Biopharmaceutical Processing – Protein concentration, buffer exchange, and virus removal. Cell Culture Harvesting – Clarification of cell suspensions post-fermentation or bioreactor. Synthetic Biology – Preparation of cell-free extracts, nucleic acid concentration, and purification. Gene Editing & Molecular Cloning – Sample concentration and buffer exchange before downstream analysis. Diagnostics Manufacturing – Filtration of assay components and reagent prep for diagnostic kits. Fluorescence & Imaging Sample Prep – Ensures clean, debris-free samples for accurate analysis. Benefits Reliable Performance – Delivers consistent and reproducible results for critical bioprocess steps. Process Flexibility – Adaptable to a wide range of biomolecule sizes and sample types. Aseptic Operation – Designed for cleanroom and GMP environments. Low Hold-Up Volume – Minimizes product loss during filtration. Trusted Brand – Developed by Millipore, a global leader in membrane filtration technologies.

Condition: ready for operation (used), Year of construction: 2019, A total of five structurally similar Coriolis mass flow meters Krohne are available, four of which are unused. Transmitter: MFC 400 F, process temperature min./max.: -70°C/150°C, operating pressure range: 5bar-10bar, communication: Profinet, current fluid density: 0.9kg/l, viscosity: 300mPas, temperature: 120°C, max. pressure: 10bar. 1) Sensor: Optimass 6000-S08, connection DN15 Tri-Clamp, installation length: 305mm, max. measuring range: 0l-300l/h, max. fluid temperature: 230°C. 2) Sensor: Optimass 6000-S08, connection DN15 Tri-Clamp, installation length: 305mm, max. measuring range: 0l-60l/h, max. fluid temperature: 230°C. 3) Sensor: Optimass 6000-S08, connection DN15 Tri-Clamp, installation length: 305mm, max. measuring range: 0l-60l/h, max. fluid temperature: 230°C. 4) Sensor: Optimass 6000-S10, connection DN15 Tri-Clamp, installation length: 315mm, max. measuring range: 0l-200l/h. 5) Sensor: Optimass 6000-S15, connection DN25 Tri-Clamp, installation length: 480mm, max. measuring range: 0l-1500l/h. Position 5 was installed solely for testing purposes. Documentation available. An on-site inspection is possible. Lhsdpfx Ajyiflashtsk

Year of construction: 2022, condition: like new (used), functionality: fully functional, We are presenting the almost brand-new EyeC GmbH EyeC Proofiler 1200 DT (EyeC 3023) Print Inspection & Quality Control System. HIGH CONVERSION DESCRIPTION Like New - Immediate Availability - Priced to Sell - Ready for Export Model: EyeC Proofiler 1200 DT Condition: Like New - barely used EyeC Proofiler 1200DT print inspection system in excellent condition, barely used and fully operational. This is a great opportunity to acquire a high-end inspection system at a significantly lower price. ✔ Print-to-Print & Print-to-File Comparison ✔ High-precision defect detection ✔ Suitable for pharmaceutical, packaging, and commercial printing The machine is installed and can be tested. Additional photos and videos are available upon request. 🌍 Available for export 📍 Located in Turkey ✈️ Delivery Terms: EXW Turkey – ready for export ⚠️ Serious buyers only - quick decision preferred 📧 Contact now for price discussion and details ▪️ Inspection Type: Print-to-print & Print-to-file comparison ▪️ Application: Print Inspection & quality control ▪️ Max. inspection width: approx. 1200 mm ▪️ Camera system: High-resolution line scan camera ▪️ Lighting: Integrated LED illumination system ▪️ Defect detection: Missing print, color deviation, misalignment, defects ▪️ Software: EyeC Proofiler Software (original) ▪️ Operation: PC-Controlled System ▪️ Speed: High-speed automated inspection ▪️ Industry: Pharmaceutical, packaging, commercial printing The machine is installed and can be demonstrated upon request. Lodeyxfrpopfx Ahtehk If you have any questions or need further information, you can send us a message or call us. You can also reach us via email or WhatsApp.

Condition: used, SLA5800 Biotech - MFC - Digitally controlled mass flow controller for gas, Mass Flow Controller elastomer-sealed mass flow controller, flow control, flow meter, flow controller, thermal mass flow BROOKS INSTRUMENT Type SLA585081BAB1A2S1 Ser. No. 01C00500222 Year of manufacture 2020 (new / unused in original packaging) SLA5800 Biotech series Option package Biotech Premium Packet Code T Mains connection 13.5 - 27 VDC (plug M8, 5 pin, male) Power consumption max. 10 watts PROFINET interface (2x RJ-45) Visual display 2 LEDs (NET / MOD) Gas connection 6 mm Swagelok Valve design Normally closed User gas O2 (oxygen) Active - Multiple / O2 (oxygen), N2 (nitrogen), CO2 (carbon dioxide), AIR (air) Calibration gas N2 (nitrogen) Flow control ranges (full scale) 20000 sccm (20 liters / minute) Maximum inlet pressure 4500 psi (300 bar) Normal operation Pressure differential 60 psig (4 bar) Control range 2% to 100% of full scale (range of mechanism) Typical accuracy from 20 to 100 % ± 0.9 % of set point for 20 to 100 % of full scale Lhedpsuqgbyjfx Ahtsk Typical accuracy from 2 to 20 % ± 0.18 % of full scale for 2 to 20 % of full scale Repeatability ± 0.2 % of the measured value Resolution 0.1 % of full scale Typical response time of the controller

Condition: new, Year of construction: 2019, Emerson Micro Motion F100S Coriolis Mass Flow Meter | 4200 Transmitter | New in Box | 2019 We offer this Emerson Micro Motion Coriolis Mass Flow Meter in excellent, unused condition. The unit comes complete with the original Emerson 4200 transmitter, calibration certificate, documentation, software CD, and original packaging. Condition: Lodszpaagepfx Ahtshk Unused surplus stock. Sold exactly as shown in the pictures. Delivery: Ex Works Rotterdam, The Netherlands. Payment: 100% in advance. Sold as is, where is, without warranty or guarantee.

Condition: used, CNC oxy-fuel cutting system BACH, type ACW 2500 Oxy-fuel cutting machine with CNC control NBS 400 Machine no. 14 561-06, year of manufacture 2006 Cutting area: 2500 x 6500 mm Travel length: 8000 mm Track gauge: 3345 mm Lhjdpfof Ncadsx Ahtjk Height of travel: 650 mm 2x machine cutting torches with cutting table (2-part)

Condition: repair required (used), Year of construction: 2000, Machine was used to unload an injection molding machine. The robot has 5 axes, the first axis being the rail. It was provisionally commissioned and moved in single-axis mode. Damage to the harmonic drive of the 5th axis was found. The sleeve broke there and would have to be replaced. All others run fine. The control element is missing on the main switch. Lsdpjkt Nqbofx Ahtehk Machine can be inspected under voltage.

Condition: used, Pressure gauge, flow meter, measurement and control technology, liquid flow meter, float switch, flow monitor -Manufacturer: Kobold, flow meter flow monitor Lsdpfx Ahsuwggqetjhk -Type: 70-75 -Dimensions: 160/40/H90 mm -Weight: 1.7 kg