Used Centrica Business Solutions Mtu 12V4000 L33 for sale (8,201)

Condition: used, Year of construction: 2023, functionality: unexamined, machine/vehicle number: MTU 12V4000 L33, type of input current: three-phase, total height: 5 mm, total length: 25 mm, total width: 3 mm, type of cooling: water, Equipment: documentation/manual, rotational speed infinitely variable, Plant assembled and NEVER put into operation Cogeneration Unit MTU 12V4000 L33 GAS GENERATOR SET Condition: New – 0 hours Enclosure: Enclosed container Rated electrical power: 1,262 kW Thermal power: 1,355 kW Electrical efficiency (cos φ = 1.0): 42.1% Thermal efficiency: 45.2% Nwsdpfx Aqsydqlqsvog Total efficiency (full heat recovery): 87.3% Fuel consumption: • At 100% load: 299 Nm³/h • At 75% load: 232 Nm³/h • At 50% load: 167 Nm³/h Manufacturer: MTU – Centrica Business Solutions Srl Equipment designation: Type: E1265 250 Nox L33 Natural Gas CHP Unit Configuration: Containerized Rated current: 1,935 KVA Engine: Genset Rolls Royce MTU 12V4000L33 Number of cylinders: V12 Max engine power: 1,320 kW Generator: Stamford Model: PE734E-312 Type: Three-phase, synchronous, four-pole, brushless Rated voltage: 400 V Frequency: 50 Hz Dimensions (L x W x H): 12,800 / 2,700 / 2,900 mm Absorption Unit CARRIER 16LJ-F41 Condition: New – 0 hours Enclosure: Enclosed container Capacity: 1,178 kW Cooling System Flow rate: 56.4 L/sec Pressure: 45 kPa Connection (DIN): 8” (inch) Volume: 0.48 m³ Heat Rejection System Flow rate: 93.1 L/sec Pressure: 117 kPa Connection (DIN): 10” (inch) Volume: 1.39 m³ Dimensions (L x H x W): 5,330 x 3,080 x 1,690 mm Weight: 13,700 kg Evaporative Cooling Towers: No. 2 Condition: New – 0 hours

Condition: new, functionality: fully functional, fuel type: gas, power: 1,521 kW (2,067.98 HP), output voltage: 400 V, output frequency: 50 Hz, rotational speed (max.): 1,500 rpm, motor manufacturer: MTU, 10 pcs in stock =Scope of supply= Genset mtu 12V4000L64FNER, 400 V for operation with Natural Gas. gas train of 116-250 mbar inlet pressure with 1m flexible rubber-metal connecting hose. set of sylomer stripes for genset foundation installation. set of flexible connection for engine coolant circuit with flange connection set of flexible connection for mixture coolant circuit with flange connection Nsdpoy Hcvbofx Aqvjwg set of exhaust bellows with flange connection and companion flange set Maintenance-free starter batteries, mounted on base frame. MIP (MTU Interface Panel) incl. Black Start option and ECU Remote Control interface =Technical specifications= Time for delivery - in stock Engine type - mtu 12V4000L64FNER Electrical power - 1521 kW Engine speed - 1500 rpm Electrical efficiency - 43.9 % Total efficiency - 88.6 % Alternator type - Leroy Somer LSA 53.2 VL6 Voltage - 400 V Frequency - 50 HZ < 500mg NOx at 5% O2 =Other information= Production country - Germany

Condition: used, Year of construction: 2008, For sale, we offer an MTU combined heat and power (CHP) plant with 1.2 MW electrical output. Technical details: Manufacturer: MTU Engine: MTU 12V4000L62 Nwedpfx Aqoxcwlaevog Generator: Stamford Year of manufacture: 2008 (completely overhauled in 2015) Operating hours: 63,000 Including control cabinets Including dry cooler

Condition: new, Year of construction: 2025, functionality: fully functional, power: 1,521 kW (2,067.98 HP), input voltage: 400 V, On offer: new Brand: Mtu Type: 12v 4000 gs l64 FNER Year of manufacture: 2025 Power: 1521 kW Njdpfx Aqey Hivuovowg Voltage: 400V 50Hz Operating hours: 0 With manufacturer’s warranty Scope of delivery: gen set gas train ramp MMC control panel

Condition: new, Year of construction: 2026, functionality: fully functional, fuel type: diesel, output voltage: 400 V, output frequency: 50 Hz, nominal power: 800 kW (1,087.70 HP), nominal power (apparent): 1,000 kVA, continuous power: 880 kW (1,196.47 HP), continuous power (apparent): 1,100 kVA, rotational speed (max.): 1,500 rpm, motor manufacturer: MTU, =Scope of supply= 2 x MTU 16V2000 DS1100 Njdpfx Aqjy Udftsvjwg =Technical specifications= Time for delivery - in stock Engine type - 16V2000G26F Prime power - 800 kW (1000 kVA) Emergency supply power - 880 kW (1100 kVA) Engine speed - 1500 rpm Voltage - 400 V Frequency - 50 HZ =Other information= Production country - Germany

Year of construction: 2026, condition: new, functionality: fully functional, DN Solutions PUMA DNT2600M Type: CNC Turning Center (Live Tooling) Control Unit: Fanuc Chuck Size: 10 Inch with C-Axis Bar Capacity: 81 mm Max. Turning Diameter: 380 mm Max. Turning Length: 610 mm X-Axis Travel: 260 mm Z-Axis Travel: 658–680 mm Spindle Speed: 3500 rpm Spindle Power: 22–26 kW Max. Torque: 327–735 Nm Turret Capacity: 12 Stations Nwjdjy R E Stepfx Aqvjg Live Tool Speed: 6000 rpm

Condition: new, Year of construction: 2024, NEW, unused machine!!! DN SOLUTIONS PUMA 5100LMB Year of manufacture: 2024 C-axis with driven tools Nwjdoy H D Ufspfx Aqvjg Control: FANUC OiF touch Chuck: 21 inches (535 mm) Spindle bore: 166 mm Travels: X – 362 mm Z – 2,155 mm Maximum turning length: 2,002 mm Maximum turning diameter: 650 mm 12-position head BMT 75 Knoll chip conveyor

Condition: new, Year of construction: 2025, DN SOLUTIONS PUMA GT3100L (12/2025) – Long Bed Model: PUMA GT3100L Year: 12 / 2025 Steady rest Chuck Size: 12 inch Max Turning Diameter: ~ Ø480 mm Max Turning Length: ~ 2,000 mm (long bed) Spindle Bore: 102 mm Spindle Speed: 3,000 rpm Main Motor Power: 26 kW Max Torque: ~ 735 Nm X Axis Rapid Traverse: 24 m/min Nwedpfx Aey Hfh Heqvog Z Axis Rapid Traverse: 24 m/min Guideway Type: Box guideways Control Unit: Fanuc i Plus Turret: 12 station

Condition: new, functionality: fully functional, fuel type: diesel, power: 1,120 kW (1,522.77 HP), output voltage: 400 V, output frequency: 50 Hz, nominal power (apparent): 1,250 kVA, continuous power (apparent): 1,400 kVA, rotational speed (max.): 1,500 rpm, motor manufacturer: MTU, =Scope of supply= Genset Raditor Agc 4 controller Silencer Compansator Nwjdpfx Ajy Hc Dxsqvsg Batteries/ filters First filling of oil and antifreeze =Technical specifications= Time for delivery - in stock Engine type - 18V2000G76F Prime power - 1000 kW (1250 kVA) Emergency supply power - 1120 kW (1400 kVA) Engine speed - 1500 rpm Alternator type - Leroy Somer LSA 50.2 L7 Voltage - 400 V Frequency - 50 HZ =Other information= Production country - Germany

Condition: new, Year of construction: 2026, functionality: fully functional, fuel type: gas, power: 2,547 kW (3,462.95 HP), output voltage: 10,500 V, output frequency: 50 Hz, total length: 1,300 mm, total width: 300 mm, total height: 300 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: MTU, =Scope of supply= Genset mtu 20V4000L64FNER, 10500 V (Natural Gas) ⁠Exhaust silencer and chimney Skid group ⁠Control panel MMC and auxiliary panel ⁠Integrated oil tank ⁠Fire and smoke detection systems Ventilation and air filtration systems Sound and weather proof container 13x3x3m =Technical specifications= Engine type - mtu 20V4000L64FNER Electrical power - 2547 kW Engine speed - 1500 rpm Electrical efficiency - 44.1 % Nwodpfx Aqsy Eyw Tsvsg Total efficiency - 90.4 % Alternator type - Stamford S9 H1D G42 Wdg83 Voltage - 10500 V Frequency - 50 HZ < 500mg NOx at 5% O2 =Other information= Time for delivery - 4 months Transport dimensions (LxWxH) - 13x3x3 m Production country - Germany

Condition: as good as new (ex-display), Year of construction: 2022, CNC lathe Doosan Puma GT2100M, year 2022/10. Condition: new machine, showroom unit. Equipped with a Cromar chip conveyor. Nedjy Azrajpfx Aqvswg

Condition: used, Year of construction: 2016, functionality: fully functional, Nominal thermal output: 150 kW Firing thermal output: 45-150 kW Boiler water volume: 370 liters Boiler class: 3 Maximum operating pressure: 3.0 bar Maximum operating temperature: 90°C Nwodpsx At Nbofx Aqveg Must be disassembled and transported by the buyer.

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 1013, REF: MM6216 1 X Comek vertical form, fill and seal bagging machine with Zodiac HS screen Technical specification ⚙️ ✅ Manufacturer - Comek Automatic Packaging Solutions ✅ Model - VPB 330 EVO. ✅ Serial - 1013. Nedpjxd Ubnsfx Aqvewg ✅ Date of manufacture - 2019. ✅ Weight - 2,500 Kg ✅ Installed power - 10 Kw ✅ Sealing jaws - 330mm (horizontal) x 460mm (vertical). ✅ Overall dimensions - 2000mm long x 1500mm wide x 1800mm high. Note 🗒️ No printer.

Condition: used, ETS MPA102/L620M Shaker Vibration Testing & Horstmann HS 220 Climate Test Chamber System Vibration Testing System: ETS MPA102/L620M Sine Force: 600 kgf Random Force: 600 kgf Shock Force (6 ms, half sine): 1,200 kgf Max. Sine Velocity: 2 m/s Max. Sine Acceleration: 981 m/s² Armature Diameter: 200 mm First Resonance Frequency: 3,300 Hz Dimensions: 943 x 633 x 770 mm Shaker Weight: 730 kg Amplifier Unit: 6 kVA Blower Unit: HP-2 / 4 kW Climate Chamber: Horstmann HS220 Test Chamber Volume: 220 liters Test Chamber Dimensions: 600 x 600 x 600 mm (H x W x D) Njdpfx Aqey Sl Uqevowg Temperature Range: -40 to +180 °C Cooling Rate: 2 K/min 3 K/min Heating Rate: 3 K/min 3 K/min Electrical Connection: 400V, 3/N, 50 Hz / 5 kW External Dimensions: 1,630 x 1,700 x 1,200 mm (H x W x D) Used item as shown in the pictures. Shipping: The specified shipping costs apply to deliveries within Germany. Worldwide shipping available (please inquire for shipping costs outside Germany). The given shipping costs apply to shipping within Germany. Sale only to commercial customers. No warranty or guarantee. Deviations from the technical data as well as errors in the article description are possible and subject to change.

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, overall weight: 36,000 kg, oil tank capacity: 1,300 l, year of last overhaul: 2025, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Njdpfjvf E Avjx Aqvowg Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: reconditioned (used), Year of construction: 2000, operating hours: 32,169 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,320 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 750 kg, overall weight: 22,000 kg, oil tank capacity: 900 l, For sale is a complete baling system consisting of conveyor technology, baling press (partially refurbished and tested) and wire stations. Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Typ HBC 60A Year of construction 2000 Hours of operation 32,169 hours, stand November 2024 Press power main press 60 tons Press power of pre-press max. 25 tons Feed channel 1,320 x 1,100 mm Nwedsviwdmopfx Aqvjg Theoretic cycle time 18 sec. Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical Throughput rate at a bulk weight of 30 kg/cbm approx. 5,5 tons/hour bulk weight of 50 kg/cbm approx. 10 tons/hour bulk weight of 100 kg/cbm approx. 16 tons/hour Bale weight 400 up to 750 kg, depends on material SPS controller Telemecanique TSX Micro Machine weight baler approx. 24 tons Scope of delivery: 1 piece chain belt conveyor 1 Bollegraaf HBC 60A baler with whirling unit 1 maintenance platform with access ladder 2 wire stations with deflection rollers for 10 wire reel stands (without wire) The following repair and overhaul work was carried out: Hydraulic oil tank emptied, cleaned and refilled with new oil Oil filter and air filter replaced Hydraulic block partially resealed Hydraulic hose on hydraulic block replaced Wire entry marks on the floor passages welded shut and smoothed Tying unit cleaned, serviced Electrical system repaired, door flap contact switch partially replaced Whirbulator repaired General maintenance work carried out, lubricated Machine tested during operation, without the use of materials, in manual mode and in automatic mode, see function video Comments: The system has already been completely dismantled, stored and is available for loading at short notice. The documentation (BA, CE, electrical/hydraulic circuit diagram) is available. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: excellent (used), Year of construction: 2023, operating hours: 1,294 h, functionality: fully functional, turning length: 550 mm, turning diameter: 390 mm, bar diameter (max.): 81 mm, DN SOLUTIONS DOOSAN PUMA GT2100B – YEAR 2023 🔹 Quantity: 2 Units 🔹 10” Chuck 🔹 Ø81 mm Spindle Bore 🔹 Max Turning Length: 550 mm 🔹 Max Turning Diameter: Ø390 mm 🔹 Box Guideways 🔹 Fanuc i PLUS Control Machine Details: • Machine 1: Cutting Hours 1294 (Equipped with programmable tailstock and tool presetter) • Machine 2: Cutting Hours 1230 (Without tool presetter) 📞 For detailed videos, photos, and additional technical information, please feel free to contact us. Nwedsyw Thispfx Aqvjg Let’s get in touch and discuss further. Contact: Muhammed Özkaya

Condition: used, Year of construction: 2003, Power (KVA): 2000 Working hours: 226 Njdpfsy S Sy Hox Aqvswg

Condition: ready for operation (used), functionality: fully functional, input voltage: 400 V, total length: 13,000 mm, total width: 5,650 mm, total height: 3,300 mm, input current: 10 A, input frequency: 50 Hz, Industrial Spiral Bread Cooler An industrial spiral bread cooler is available, suitable for bakeries and production lines. The machine was in operation until recently and has been dismantled due to replacement with new equipment. The spiral has a total length of approximately 420 meters and ensures uniform cooling of the products. The dwell time for a complete cycle is approximately 94 minutes, enabling an efficient cooling process after baking. The system has a throughput of around 2,500 loaves per hour and can simultaneously accommodate up to 4,000 loaves with a total weight of approximately 2,566 kg. The design allows for configuration as a single or dual spiral (figure-eight type), depending on production requirements. It is suitable for integration into existing bread and bakery product lines. Main specifications: Nwsdpfx Aoy Au Inoqvog - Outer diameter: approx. 5.65 m (per loop) - Height: approx. 3.30 m - Required floor space: approx. 12–13 m in length (depending on configuration) - Power supply: 400V AC / 24V DC - Rated current: 10 A Manufacturer: QUBA 3 s.r.l. (Italy), line by MEFOOD Solutions Model: QC020118 The machine is sold dismantled. All components are available. It was fully operational until dismantling and is in good technical condition. On-site inspection is possible by appointment. Additional information can be provided upon request.

Condition: excellent (used), Year of construction: 2022, operating hours: 7,800 h, functionality: fully functional, machine/vehicle number: Puma 2600, turning diameter over cross slide: 630 mm, turning length: 1,245 mm, turning diameter: 376 mm, spindle bore: 102 mm, spindle speed (max.): 2,800 rpm, spindle motor power: 26 W, type of input current: three-phase, controller manufacturer: FANUC, number of spindles: 2, operating hours of spindle: 7,800 h, number of slots in tool magazine: 12, Equipment: chip conveyor, For sale: Turning center with sub-spindle and Y-axis. Machine in perfect condition. Purchased new in mid-2023. Currently in operation, with less than 8,000 operating hours; parts produced well below its technical capacity. Serviced exclusively by an authorized distributor. Adapted for robot operation: equipped with autodoor and external communication signals. Features include parts conveyor and oil mist filter. NOTE: The robot is not included in this offer – separate sale and integration support can be offered upon individual quotation. TECHNICAL DATA according to manufacturer’s specification: 1) Capacity Swing over bed: 680 mm Swing over cross slide: 630 mm Max. turning diameter: 376 mm Recommended turning diameter: 315 mm Max. turning length: 1245 mm Max. workpiece weight (incl. chuck): In chuck: 500 kg (with support: 1000 kg) Bar capacity in spindle: 102 mm 2) Main Spindle Chuck: 315 mm Spindle nose: A2#11 ASA Front spindle bearing diameter: 160 mm Spindle bore: 115 mm Chuck through hole: 103 mm Spindle motor power (S3-25%/S6-60%/S1 Continuous): 26/22/18.5 kW Spindle speed range: 2 - 800 rpm Max. spindle torque (S3-15%): 1123 Nm Power transmission: Belt 3) Sub-Spindle Chuck: 175 mm (optionally 210 mm) Spindle nose: A2#5 ASA Spindle bore (diameter): 62 mm Sub-spindle cylinder bore: 50 mm (H8) Spindle motor power (continuous/30 min): 7.5/5.5 kW Sub-spindle speed range: 4,500 rpm Max. spindle torque (30 min): 85 Nm Njdox Rqkuepfx Aqvswg Power transmission: Belt 4) Axis Travel X axis: 260 mm Z axis: 1350 mm Y axis: 105 (±52.5) mm B axis: 1350 mm C axis (1, 2): 360° (0.001° increments) Rapid traverse: X axis: 30 m/min Z axis: 30 m/min Y axis: 10 m/min B axis: 30 m/min C axis: 200 rpm 5) Bed and Saddle Slant bed, tilt angle: 30° Bed guideway (Z axis): 437 mm Saddle (X/Y axis): 321/325 mm Sub-spindle stroke: 335 mm 6) Tooling System Tool holders: BMT 65P Number of tools: 12 Tool size: 25 x 25 mm Max. drill diameter: 50/32 mm (main/sub-spindle) Driven tool motor power (5 min/Cont): 7.5/1.5 kW Driven tool speed: 5,000 rpm Driven tool max. torque: 95.5 Nm Driven tool collets (ER32): Φ3–Φ20mm (option) Turret indexing time: Single position: 0.15 s (1.2 s full station) Max. driven tool drilling diameter: φ20 mm, M20 x P2.5 7) Hydraulic System Tank capacity: 20 l Flow rate (60/50 Hz): 25 / 20.8 l/min Power/Pressure: 2.2 kW x 5.0 MPa 8) Coolant Tank capacity: 250 l Flow rate: 30 l/min Power/Pressure: 0.7 kW x 0.15/0.1 MPa (60/50 Hz) 9) Machine Accuracy Positioning: 0.01 mm Repeatability: 0.02 mm C Axis Positioning: 0.0167° Linear repeatability (axes X/Z/Y): ±0.002/±0.003/±0.003 mm C Axis repeatability: ±0.006° 10) Control System Full electric control for X, Y, Z, C axes For further questions or additional information, please feel free to contact us by message or phone.

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 6,000 rpm, travel distance X-axis: 205 mm, travel distance Z-axis: 560 mm, spindle motor power: 15,000 W, total height: 1,693 mm, total width: 1,595 mm, overall weight: 3,600 kg, controller manufacturer: FANUC, controller model: 0i PLUS, product length (max.): 2,805 mm, number of axes: 3, This 3-axis DN solutions LYNX 2100LMSA was manufactured in 2022. It features a maximum turning diameter of 300 mm and a turning length of 510 mm. The machine includes a 6-inch chuck size, a 12/24 station turret, and a sub-spindle for enhanced capabilities. If you are looking to get high-quality turning capabilities, consider the DN Solutions LYNX 2100LMSA horizontal turning machine we have for sale. Contact us for further details. • Condition: New, 0 operating hours • Control unit: FANUC 0i PLUS with 15” touchscreenCapacity • Chuck size: 6 inch • Max. turning diameter: 300 mm • Max. turning length: 510 mmAxes / Travels • X-Axis rapid traverse: 30 m/min • Z-Axis rapid traverse: 36 m/min • Number of linear axes: 2 (X / Z) • C-axis: Spindle positioning for milling and drilling operationsMain spindle • Max. spindle torque: 127 NmSub-spindle • Sub-spindle: Yes • Max. sub-spindle speed: 6,000 rpmTurret • Turret stations: 12 / 24 • Rotary tool speed: 6,000 rpmIntegrated options • Automatic tool setter • High-pressure coolant system: 7 bar Additional equipment Nodpfey Ex A Usx Aqvewg • Chip conveyor • Robot interface • Automatic door • Parts catcher with conveyor Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: new, Year of construction: 2026, We offer: Pellet machines from the WALW-Solutions brand, featuring unique quality, honest workmanship, and at a fair price. Honest Work: We manufacture our systems ourselves directly in Poland. Only components such as gearboxes and motors are sourced from reputable manufacturers. All other parts are designed and built in-house, allowing us to meet every requirement individually. Fair Price: We produce in Poland and are transparent about it. Other competitors who label their product as 'Made in Germany' typically only assemble the machines in Germany and source most components from Lithuania. We let you benefit from the lower production costs, which allows our offer prices to often be 40% below those of competitors. These machines for pellet production are completely new to the market in this price/performance segment and are unique in Europe! WALW-Solutions machines are available exclusively through us! From systems for processing your own wood chips from firewood operations or joineries, to professional industrial pellet production from wood chips, straw, miscanthus, etc.—as well as manufacturing hay or straw cobs—we can provide the ideal solution for your needs. Our plants have capacities ranging from 150 kg/hour up to 5 t/hour and come equipped with all necessary components for a fully automated system. We offer tailored solutions for any input material and can integrate automation into existing systems as well. All machines and control units are equipped with components from Siemens, ABB, Schneider Electric, or similar leading brands. Please note: If you have a valid VAT ID, net purchases are possible! Nodjlt Ugtopfx Aqvjwg We look forward to your inquiry! For more information or direct interest, please contact me on my mobile at:

Condition: good (used), operating hours: 34,700 h, functionality: fully functional, fuel type: diesel, output frequency: 50 Hz, nominal power (apparent): 1,250 kVA, type of cooling: water, MTU diesel generator set including exhaust aftertreatment according to 44.BImSchV (from 1/2026, 100mg NOX, 6mg particulates, etc.). A complete overhaul was carried out at 21,000 operating hours for over 100,000 euros. All filters of the exhaust aftertreatment system were replaced in 2025. The exhaust aftertreatment unit can also be purchased separately. Nedpfsy Nbt Rex Aqvowg

Condition: used, Year of construction: 2010, operating hours: 13,800 h, power: 1,600 kW (2,175.39 HP), For sale are 3 MTU cogeneration modules / CHP plants manufactured by MTU Onsite Energy GmbH, model AoE16V4000L62, year of manufacture 2010. These plants are ideally suited for decentralized energy generation and combined heat and power (CHP) applications. Technical specifications (per documentation): Nwedpfx Aeyt H H Neqvog * Electrical output: 1,600 kW * Thermal output: 1,746 kW * Gas power: Pgaz PCS 4,579 kW / Pgaz PCI 4,121 kW * Voltage / Frequency: 400 V / 50 Hz Operating hours: * GE1: 42,479 h * GE2: 13,800 h * GE3: 43,397 h The scope of supply, as per documentation, includes a comprehensive range of auxiliary equipment and system components, including: roof-mounted air cooler, auxiliary cabinet, control cabinet, exhaust heat exchanger, water heat exchanger, pipework and ducts with chimney, oil storage room with 3 tanks and piping, as well as electrical cabling. These plants represent an attractive solution for operators, resellers, and projects in the fields of energy supply, industry, or for spare parts recovery.

Year of construction: 2022, condition: used, functionality: fully functional, machine/vehicle number: SPE-Spero-LTX-340, The device was used for research purposes. SPE-Spero-LTX-340, MIR microscope with "Hyper Spectral Imaging" function; spectral coverage (1900 to 950 1/cm). Enhanced LowMag lens 4.0X; NA:0.3, 2.0mm FOV. Dedicated IR-transmission mode. Broadband 480*480 pixel microbolometer camera, including high-precision automated stage ( Nwedpfsyxc Twex Aqveg