Used Clarifier for sale (104)

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, AS-07251 – Alfa Laval Clarifier Module, 10 m3/h ALFA-LAVAL PURE SOX (SWPX 810 SGV-34CGL) CLARIFIER MODULE, 316SS. Capacity min. 10,000 L/h Tedjw Ap I Aspfx Ak Doa Offering 3 identical units. Max. bowl speed 7200 RPM, rated at 10,000 LPH, bowl volume 15 L, sludge capacity 9.4 L, liquid discharged under pressure, solids discharge pump with cyclone tank, 35 kW motor, 460/3/60/1728 RPM, Pure SOx scrubber, unitized on a common skid with all valves, piping, control panel, tools, spares, and manual. Year of manufacture: 2017.

Condition: like new (used), Year of construction: 2019, operating hours: 300 h, functionality: fully functional, overall weight: 2,500 kg, rotational speed (min.): 4,500 rpm, screw diameter: 305 mm, year of last overhaul: 2026, temperature: 80 °C, empty load weight: 2,500 kg, power: 22 kW (29.91 HP), Equipment: documentation/manual, rotational speed infinitely variable, Complete Technical Data (GEA OCE 305-01-32) Technical ParameterSpecification and Values Manufacturer & ModelGEA Westfalia Separator Group GmbH – OCE 305 Series Equipment TypeHigh-performance 2-phase decanter centrifuge (Solid-Liquid) Bowl Inner Diameter305 mm Bowl DesignFlat-cone design with an extended length (Extended L/D ratio) Maximum Hydraulic CapacityUp to 5 m³/h (varies depending on solid concentration) Maximum Solids Density2.6 kg/dm³ Drive Type2-Gear Drive (System with 2 independent motors, no magnetic brake) Differential Speed ControlAutomatic via dedicated Variable Frequency Drives (VFD) Overall DimensionsLength: 3000 mm | Width: 1000 mm | Height: 1150 mm Total Weight (Complete Skid)Approx. 2500 kg Lubrication SystemAutomatic centralized grease lubrication for main bearings Construction MaterialsHigh-grade duplex stainless steel (all product-contact areas) Scroll Wear ProtectionSintered tungsten carbide tiles welded onto the flight edges II. Liquid Discharge Under Pressure System Tjdpfxozgq Szj Ak Dea Unlike standard models with gravity discharge (where the liquid falls freely into a collection tank), your model retains the clarified liquid phase inside a hydro-hermetic tripetal Pump (Paring Disk): The separated liquid flows toward the cylindrical end of the bowl, entering a special chamber where a stationary disk with spiral internal channels (a reverse turbine) is located. Kinetic-to-Pressure Energy Conversion: The kinetic energy of the rapidly rotating liquid is instantly transformed into hydrostatic pressure when it hits the channels of the stationary disk. Advantages: The liquid leaves the decanter directly under pressure (without requiring an external transfer pump). This prevents product foaming (highly critical for oils, chemical products, or food-grade applications) and eliminates contact with atmospheric oxygen. Electrical cabinet with frequency inverters and PLC (Siemens) with an access code for modifying the parameters, including factory documentation.

Condition: good (used), Hermetic hydro clarifier, complete, tool set, 30 kW motor power, with documentation and overhauled. Price: 35,000 euros. Tsdpfsy Rtlzox Ak Doa

Condition: ready for operation (used), Two Artinox inclined clarifier/lamella clarifier systems made of stainless steel are offered for the continuous mechanical separation of dirt particles, sludge, or sediments from water or process liquids. 1) Artinox inclined clarifier/lamella clarifier, pipe connection: Ø 108mm, additional connection: Ø 168mm, main module dimensions: approx. 2400mm/1350mm/2360mm, hopper width bottom/top/center: approx. 1323mm/1896mm/1546mm, inclination: approx. 1.1°, function: solid-liquid separation by sedimentation, application: process water, wastewater, wash water, liquids containing settleable solids, separation principle: sedimentation with lamella packs/inclined plates, flow direction: horizontal, lamella packs: available, sedimentation hopper: available, equipped with multiple basin modules, lamella clarifier sections, sludge hopper, upper pipe distributor, connection nozzles and flanges, lifting lugs, frame, maintenance access. 2) Artinox inclined clarifier/lamella clarifier, smaller module dimensions: approx. 2300mm/1250mm/1371mm, hopper height/inclined bottom section: approx. 1050mm, inner/lower hopper dimension: approx. 775mm, lamella/sheet spacing: approx. 293mm, function: separation of settleable solids from liquids, design: rectangular clarification tank with hopper bottom, flow path: via inlet, clarification zone, overflow edge, sludge hopper: available, separate pre-collection tank: available on the side, discharge pipe/flange connection: available, maintenance ladder: available, wooden cover: available, equipped with main clarification tank, hopper bottom, side-mounted attachment tank, pipe connection, flange, maintenance ladder, upper cover. Inspection possible by appointment. Tjdpfozhb Hfjx Ak Dea

Condition: refurbished (used), Year of construction: 1973, functionality: fully functional, rotational speed (min.): 4,800 rpm, Separator WESTFALIA type SB60-06-076 for beer, fruit juices, wine, vegetable juices, tea, coffee, for citrus and tropical fruits for pectin capacity: 300-13.000l per hour with 4,800 rpm Dimensions and weight: Height: 2500 mm Length: 2000 mm Width: 1800 mm Weight: 2350 kg Technical Data: Manufacturer: Westfalia Type: SB60-06-076 Year of construction: 1973 Serial number: 1668 021 Ø dl. 568 mm Drum speed: 4800 rpm Todotqf Dbjpfx Ak Dea Permissible density of the centrifuged material: Heavy liquid: 1.0 kg/ dm3 Solids: 1.45 kg/ dm Test books, tools, drawings available!

Condition: like new (used), HERMETIC CLARIFIER. POWER: 7.5 kW. COMPLETE TOOL SET. INSPECTED. DOCUMENTATION AVAILABLE. PRICE: 25,000 EUROS PLUS VAT. Tedpfjy S Smysx Ak Dsa

Condition: used, Year of construction: 2012, GEA Milk Separator MSE 100-06-177 Year of manufacture: 2012 Maximum permissible drum speed: 7200 rpm Maximum permissible feed density: 1.0 kg/dm³ Heavy liquid: 1.0 kg/dm³ Solids: 1.1 kg/dm³ Min./max. feed temperature: 5/100 °C Tedpfewayr Tex Ak Dsa Max. throughput: 30 m³/h

Condition: ready for operation (used), A GEA clarifier (skimmer) is available. Bowl speed: 5920 rpm, material density: 1.1 kg/dm³, production capacity: approx. 10000 l/h, motor power: approx. 18 kW, construction material: stainless steel 316, documentation available. On-site inspection is possible. Tedju S I D Dopfx Ak Dja

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, operating hours: 7,072 h, load capacity: 4,000 kg, lifting height: 4,350 mm, free lift: 1,960 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 2,950 mm, motor manufacturer: VW, gearing type: hydrostat, fork carriage width: 1,360 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 27X10-12, overall weight: 9,800 kg, empty load weight: 5,800 kg, total height: 2,400 mm, total length: 2,300 mm, total width: 2,200 mm, color: green, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, COMBILIFT C4000 – 2000 | 7,072 HOURS | GAS | DUPLEX 4,350 mm | FREE LIFT 🚜 Ready for immediate operation – no investment, no risk 🔍 Why choose this forklift? Looking for a forklift that won’t disrupt your workflow? This COMBILIFT C4000 is a proven machine, fully serviced and ready for use – just get in and start working. No hidden costs. ✔ Fully serviced (oils, filters, comprehensive inspection of all components) ✔ Technical and visual condition: like new ✔ Only 7,072 operating hours – genuinely low usage ✔ New tires – no additional investment necessary ⚙️ Key specifications: Load capacity: 4,000 kg Drive: Diesel (N.B.: initial says "gas", but spec field states "diesel", clarify on actual technology) Mast: Duplex – 4,350 mm lift height Fork positioner width: 1,360 mm Fork length: 1,200 mm Cabin: enclosed / heated 📋 Full technical specification General information: Year of manufacture: 2000 Operating hours: 7,072 Load capacity: 4,000 kg Load center: 600 mm Machine weight: 5,800 kg Mast and lifting equipment: Mast type: Duplex Lifting height: 4,350 mm Forks and attachments: Wide fork positioner: 1,360 mm Fork length: 1,200 mm Dimensions: Height: 2,400 mm Length: 2,300 mm Width: 2,200 mm Overall height: 2,950 mm Chassis: Tyres: Superelastic (100%) – new Front: 200/50-10 Rear: 27x10-12 Equipment: Fully enclosed, heated cabin Fork positioner Free lift Condition: Technical: 5/5 – fully serviced Visual: refurbished, like new, no corrosion 🏭 Ideal applications: ✔ Narrow aisle warehouses ✔ Timber, steel, and pipe industries ✔ Handling of long loads ✔ Indoor and outdoor operations 💼 What you really get: You don’t just buy a 'used forklift.' You're investing in a fully prepared, work-ready machine: ✔ Every unit fully tested before delivery ✔ Ready for immediate use ✔ Live video demonstration available ✔ Direct delivery to your location 🚚 Delivery and support: Tedpezqfk Hsfx Ak Dea European-wide transport Full logistics support Leasing / financing options available After-sales support ⭐ Why FT LOGISTICS? We deliver forklifts that work – not machines that sit idle in the workshop. ✔ Over 100 machines available ✔ In-house service and preparation ✔ Experience across Europe ✔ Hundreds of satisfied customers 📞 Contact us today FT LOGISTICS – Quality you can rely on. Service you can trust.

Condition: used, Year of construction: 2002, Overview This Alfa Laval VNPX 510 SFD-34C is a self-cleaning disc-stack separator built in 2002 by Alfa Laval (Tumba, Sweden). The VNPX series is an established solids-ejecting clarifier platform for the food and beverage industry; this unit was last operated in a brewery. The separator is currently disassembled: frame, bowl section, drive motor and fittings are stored as individual components, which makes inspection of the main parts straightforward and simplifies transport. The scope of delivery includes the 22 kW ABB drive motor, a stainless steel sludge collection vessel of approx. 150 l and the Siemens SIMATIC C7-633 control system with a separate touch panel and switch cabinet. Technical data Tsdpfxjzpai Is Ak Doa - Manufacturer: Alfa Laval (Tumba, Sweden) - Model: VNPX 510 SFD-34C - Year of manufacture: 2002 - Machine type: self-cleaning disc-stack separator (clarifier) - Max. bowl speed: 6,240 rpm - Motor shaft speed: 1,500 rpm, 50 Hz - Recommended motor power: 22 kW - Max. density of feed: 1,100 kg/m³ - Process temperature: -5 to +100 °C - Control: Siemens SIMATIC C7-633 incl. separate touch panel and switch cabinet Equipment - ABB drive motor, 22 kW (separate) - Stainless steel sludge collection vessel, approx. 150 l - Siemens SIMATIC C7-633 control with touch panel and switch cabinet - Valve and fittings assembly with flow meters and pressure gauge - Operating manual (German) Condition Used. The separator was dismantled for operational reasons and is sold disassembled; the motor is separate. The components were stored outdoors. Availability Immediately. Location: Germany.

Year of construction: 2026, condition: new, New machine Year of manufacture: 2026 The space-saving, swiveling vacuum press with a pressing area of 3500 mm x 1420 mm. Technical standard equipment of the vacuum press: Unless otherwise agreed, the vacuum press is powder-coated in RAL 7012 and RAL 7035 color shades. Custom colors are available upon request and must be clarified in advance, which may result in additional charges. Welded table construction designed for professional use, mounted on a swiveling chassis cart, standing on 4 swivel castors, surface load capacity of 150 kg. When not in use, the machine can be swiveled for space-saving storage and locked in place, reducing the required depth to only 800 mm. The table surface consists of a 22 mm thick HPL-MDF board, with a slotted vacuum distribution plate made from MDF covering the pressing area. The membrane frame is supported by 2 gas pressure springs mounted on the sides of the machine. A natural rubber membrane with 2 mm thickness, 780% elongation capability, and temperature resistance up to 70°C is installed, attached by a clamping system for efficient membrane changes. The all-around sealing of the press area is provided by a sealing profile installed in the membrane frame. Oil-circulated vacuum pump with a suction capacity of 40 m³/h and two vacuum tanks with a total capacity of 200 liters. Evacuation and ventilation of the press area is managed via a 3-way ball valve located at the front of the machine. The machine is delivered pre-assembled on a pallet. Please note that unloading requires a forklift with sufficient lifting capacity and fork length. Additionally, it is possible to book initial setup and a quick instruction by one of our staff members. If desired, we are happy to provide you with a separate offer for this service. Todjznph Ropfx Ak Dja Summary of key data: - Welded frame construction - Highly flexible natural rubber membrane, thickness: 2 mm, elongation: 780%, very high recovery capability, suitable for temperatures up to 70°C - MDF vacuum distribution plate - Digital vacuum control VAK-CONTROL 1 with auto shut-off - Vacuum pump: 40 m³/h, oil lubricated - Max. vacuum: -0.99 bar - Max. pressing pressure up to 9.9 t/m² - Connected load: 1.40 kW (400 Volt) - Vacuum tank: 200 liters - 4 swivel castors with locks - Additional 13 mm vacuum connection - Pressing area: 3500 x 1420 mm - Table height to vacuum distributor plate: approx. 895 mm - Machine height closed: approx. 960 mm - Machine height closed with cover plate: approx. 1030 mm - Installation dimensions, operational: 3790 x 1700 x 2150 mm (LxWxH) - Installation dimensions, swiveled: 3790 x 800 x 1750 mm (LxWxH) Commodity code: 84659400 Net weight: 570 kg Gross weight: 660 kg Includes cover plate 3514 With a cover plate, you not only protect your membrane from UV radiation, but also convert your mobile-base vacuum press into a mobile worktable that can be used flexibly in your company. - Coated cover plate - Solid welded steel frame - Opening support by gas pressure springs Commodity code: 84669280 Net weight: 105 kg Gross weight: 105 kg The cover plate is only available in combination with a vacuum press.

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, operating hours: 7,072 h, load capacity: 4,000 kg, lifting height: 4,350 mm, free lift: 1,960 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 2,950 mm, motor manufacturer: VW, gearing type: hydrostat, fork carriage width: 1,360 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 27X10-12, overall weight: 9,800 kg, empty load weight: 5,800 kg, total height: 2,400 mm, total length: 2,300 mm, total width: 2,200 mm, color: green, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, COMBILIFT C4000 – 2000 | 7,072 HOURS | GAS | DUPLEX 4,350 mm | FREE LIFT 🚜 Ready for immediate operation – no investment, no risk 🔍 Why choose this forklift? Looking for a forklift that won’t disrupt your workflow? This COMBILIFT C4000 is a proven machine, fully serviced and ready for use – just get in and start working. No hidden costs. ✔ Fully serviced (oils, filters, comprehensive inspection of all components) ✔ Technical and visual condition: like new ✔ Only 7,072 operating hours – genuinely low usage ✔ New tires – no additional investment necessary ⚙️ Key specifications: Load capacity: 4,000 kg Drive: Diesel (N.B.: initial says "gas", but spec field states "diesel", clarify on actual technology) Mast: Duplex – 4,350 mm lift height Fork positioner width: 1,360 mm Fork length: 1,200 mm Cabin: enclosed / heated 📋 Full technical specification General information: Year of manufacture: 2000 Operating hours: 7,072 Load capacity: 4,000 kg Load center: 600 mm Machine weight: 5,800 kg Mast and lifting equipment: Mast type: Duplex Lifting height: 4,350 mm Forks and attachments: Wide fork positioner: 1,360 mm Fork length: 1,200 mm Dimensions: Height: 2,400 mm Length: 2,300 mm Width: 2,200 mm Overall height: 2,950 mm Tjdpszntwcjfx Ak Dsa Chassis: Tyres: Superelastic (100%) – new Front: 200/50-10 Rear: 27x10-12 Equipment: Fully enclosed, heated cabin Fork positioner Free lift Condition: Technical: 5/5 – fully serviced Visual: refurbished, like new, no corrosion 🏭 Ideal applications: ✔ Narrow aisle warehouses ✔ Timber, steel, and pipe industries ✔ Handling of long loads ✔ Indoor and outdoor operations 💼 What you really get: You don’t just buy a 'used forklift.' You're investing in a fully prepared, work-ready machine: ✔ Every unit fully tested before delivery ✔ Ready for immediate use ✔ Live video demonstration available ✔ Direct delivery to your location 🚚 Delivery and support: European-wide transport Full logistics support Leasing / financing options available After-sales support ⭐ Why FT LOGISTICS? We deliver forklifts that work – not machines that sit idle in the workshop. ✔ Over 100 machines available ✔ In-house service and preparation ✔ Experience across Europe ✔ Hundreds of satisfied customers 📞 Contact us today FT LOGISTICS – Quality you can rely on. Service you can trust.

Condition: good (used), mileage: 16,10,122 km, power: 330 kW (448.67 HP), first registration: 01/2017, fuel type: diesel, axle configuration: 6x2, fuel: diesel, brakes: engine braking, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, loading space length: 8,130 mm, loading space width: 2,500 mm, loading space height: 2,700 mm, Year of construction: 2017, Equipment: ABS, AdBlue, air conditioning, cruise control, electric window regulation, fog lights, navigation system, parking heater, power mirror, soot filter, spoiler, tail-lift, trailer coupling, - Aluminum fuel tank - Brake booster - Roof spoiler - EPS (Electronic Stability Program) - Refrigerator - Particulate filter - Radio/CD player - Sleeper cab - Side door - Auxiliary heater - Toolbox Axle configuration Suspension: Air suspension Front axle: Steered Rear axle 1: Lift axle Weights Unladen weight: 14,121 kg Payload: 12,379 kg Gross vehicle weight: 26,500 kg Functional Refrigeration engine: Diesel and electric Condition Technical condition: good Visual condition: good Warranty Todswvqkxjpfx Ak Doa Disclaimer: No liability for printing & typing errors, subject to change, prior sale, and errors! Further Information Please contact Emad Al Shogran for more information. Vehicle number: 69 Engine has been replaced, has 600,000 km!!! Mercedes Benz Actros 2745 / 6x2 / Mitsubishi TU85SA / Euro 6 / 2 x tail lifts / Full combination Chassis number: WDB96302010115823 Suspension: Air / Air Transmission: Automatic Air conditioning Engine brake Cruise control Cool box Auxiliary heater Stationary air conditioning EURO 6 emission standard Flower width (possibly error – please clarify) Tail lift TÜV (MOT): 01.2026 Mitsubishi Refrigeration engine: Diesel + Electric Truck interior dimensions: Length: 8.13 m Width: 2.50 m Height: 2.70 m Trailer: Mitsubishi TU85SA Refrigeration engine: Diesel + Electric Brand: Van Weel Chassis number: XL900002009081068 First registration: 26.01.2010 Unladen weight: 6,800 kg Gross weight: 18,000 kg 2 axles PBW Tail lift TÜV (MOT): HU: 12.2025 Trailer interior dimensions: Length: 7.27 m Width: 2.50 m Height: 2.88 m Special equipment: Front axle load 8.0 t, driver's side airbag, alarm system, audio system: CD radio (Bluetooth), exhaust downwards right, high pressure air unit, air horn, electric pre-wiring in cab 24V / 100A, driver assistance system: brake assist (Active Brake Assist 3), driver assistance system: roll control assist, info display 12.7 cm with additional indicators, automatic climate control, wide comfort bunk on top, additional pre-filter for fuel, fuel tank: 290l aluminium, cool box / refrigerator, integrated air intake, long-life air filter, 2-cylinder air compressor, reinforced engine brake, reinforced rear cross member, fleet management interface, cab seats: armrest passenger seat, cab seats: standard suspension passenger seat, cab seats: foldable passenger seat backrest, cab seats: comfort suspension driver’s seat, exterior sun visor, sun protection roller blinds on side windows, driver and passenger door, steel rims 11.75x22.5 (on trailing axle), steel rims 9.00x22.5, electric stationary air conditioning, left side storage box under cab, 12V socket in passenger footwell, additional 24V socket in passenger footwell. Further equipment: EURO 6 emission standard, axle configuration: 6x2, Actros 4, trailer brake 2-line, connections left, trailer socket 24V / 15-pin, electric adjustable and heated exterior mirrors, rear axle differential lock, steel air tank, driver assistance system: Attention Assist (fatigue detection sensor), driver assistance system: Lane Keeping Assist, cab: L GigaSpace, cab: steel-sprung, comfort, cab variant: GigaSpace, suspension: full air, electric window lifters, tinted windscreen, generator 100A, transmission 12-speed - type: G 211-12, AdBlue tank...

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, inner diameter: 365 mm, wall thickness: 10 mm, rotational speed (max.): 2,900 rpm, The GEA Westfalia Separator CA 365-03-00 is a high-performance, three-phase decanter designed for the efficient separation of liquids and solids. With a drum diameter of 354 mm and an extended drum length, this model offers optimized separation performance. DRUM AND HOUSING DESIGN Tsdjy H Ixuspfx Ak Dea The decanter drum is configured in a flat-cone design, enabling effective phase separation. The housing is manufactured in a standard design, facilitating integration into existing systems. LIQUID DISCHARGE Liquids are discharged with the light phase unpressurized and the heavy phase under pressure. This functionality ensures reliable and continuous removal of the separated phases. DRIVE TYPES The drum is driven via a belt drive, while the screw is driven by a gearbox. These drive types provide stable and efficient decanter operation. The GEA Westfalia Separator CA 365-03-00 provides a reliable solution for the separation of liquids and solids in various applications. plus GEA WESTFALIA SAMR 5036 CENTRIFUGE CLARIFIER FOR A COMPLETE LINE FOR OILS. The units can be sold separately or as a complete line. ?v=nv23KAJFewE

Condition: used, TOS BHU 50×2000 – USED UNIVERSAL CYLINDRICAL GRINDER A used TOS BHU 50 universal cylindrical grinder, center distance 2,000 mm, from a company liquidation. Inspection on-site or via video call is possible at any time. The following technical data are taken from the machine-specific TOS-BHU-50 data sheet and serve as a technical reference. Binding values for this individual machine will be determined after inspection. KEY FEATURES - Automatic program for longitudinal, transverse, and plunge grinding, external and internal - Precision standard IT class 5 - Spindles on hydrodynamic bearings with automatic bearing adjustment - Infinitely variable workpiece spindle speed, swivel headstock on both sides - Swiveling grinding wheel head TECHNICAL DATA (BHU 50 SERIES) - Grinding diameter: 500 mm - Center distance: 2,000 mm - Center height: 250 mm - Grinding wheel (Ø x width x bore): 500 x 80 x 203 mm Tjdpfxezi Strs Ak Doa - Diameter of worn grinding wheel: 380 mm - Diameter of workpiece in open/closed steady rest: 110 mm - Diameter of chuck: 200 mm - Taper in workpiece spindle and tailstock spindle: MK 5 - Swivel range of workpiece spindle headstock: 90°, grinding wheel headstock: ±45° - Largest longitudinal travel of the table (at 2,000 mm center distance): 2,290 mm - Table speed, infinitely variable: 0.05-5 m/min - Grinding spindle speed: 1,230 / 1,470 rpm - Workpiece spindle speeds: 16 steps, range 12-400 rpm - Grinding wheel headstock motor: 7.5 kW - Total power consumption: 16 kVA - Machine weight (at 2,000 mm center distance): approx. 6,600 kg - Largest workpiece weight: 300 kg between centers, 300 kg cantilevered STANDARD EQUIPMENT (SERIES) - Grinding wheel 500 x 80 x 203 mm for 33 m/s circumferential speed, flange, and guard - Dressing and mounting device for the grinding wheel flange, balancing mandrel - 2 fixed centers MK 5, 2 open steady rests (Ø 10-110 mm) - Sedimentation coolant system, splash guard - Micrometric dressing device for the grinding wheel (tailstock) - Driver and operating key set, machine lamp, technical documentation We would be happy to clarify in advance whether the specific machine has the full range of features based on its actual equipment. CONDITION Used machine from a company liquidation. Sold "as is, where is," warranty excluded. On-site inspection or video call inspection is highly recommended; independent functional and accuracy testing is available upon request. A general overhaul is possible upon request and for an additional charge. OUR SERVICE Online or on-site factory inspection, transport can be organized upon request, installation, commissioning, and operator training by our service technicians, direct German-speaking contact person for spare parts and support, member of FDM, the German Association of Machine and Tool Wholesale. As this is an individual machine, availability is subject to prior sale. Please call or write to us briefly, and we will arrange an inspection appointment as soon as possible.

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, operating hours: 7,072 h, load capacity: 4,000 kg, lifting height: 4,350 mm, free lift: 1,960 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 2,950 mm, motor manufacturer: VW, gearing type: hydrostat, fork carriage width: 1,360 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 27X10-12, overall weight: 9,800 kg, empty load weight: 5,800 kg, total height: 2,400 mm, total length: 2,300 mm, total width: 2,200 mm, color: green, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, COMBILIFT C4000 – 2000 | 7,072 HOURS | GAS | DUPLEX 4,350 mm | FREE LIFT 🚜 Ready for immediate operation – no investment, no risk 🔍 Why choose this forklift? Looking for a forklift that won’t disrupt your workflow? This COMBILIFT C4000 is a proven machine, fully serviced and ready for use – just get in and start working. No hidden costs. ✔ Fully serviced (oils, filters, comprehensive inspection of all components) ✔ Technical and visual condition: like new ✔ Only 7,072 operating hours – genuinely low usage ✔ New tires – no additional investment necessary Tjdpjzlcuxofx Ak Doa ⚙️ Key specifications: Load capacity: 4,000 kg Drive: Diesel (N.B.: initial says "gas", but spec field states "diesel", clarify on actual technology) Mast: Duplex – 4,350 mm lift height Fork positioner width: 1,360 mm Fork length: 1,200 mm Cabin: enclosed / heated 📋 Full technical specification General information: Year of manufacture: 2000 Operating hours: 7,072 Load capacity: 4,000 kg Load center: 600 mm Machine weight: 5,800 kg Mast and lifting equipment: Mast type: Duplex Lifting height: 4,350 mm Forks and attachments: Wide fork positioner: 1,360 mm Fork length: 1,200 mm Dimensions: Height: 2,400 mm Length: 2,300 mm Width: 2,200 mm Overall height: 2,950 mm Chassis: Tyres: Superelastic (100%) – new Front: 200/50-10 Rear: 27x10-12 Equipment: Fully enclosed, heated cabin Fork positioner Free lift Condition: Technical: 5/5 – fully serviced Visual: refurbished, like new, no corrosion 🏭 Ideal applications: ✔ Narrow aisle warehouses ✔ Timber, steel, and pipe industries ✔ Handling of long loads ✔ Indoor and outdoor operations 💼 What you really get: You don’t just buy a 'used forklift.' You're investing in a fully prepared, work-ready machine: ✔ Every unit fully tested before delivery ✔ Ready for immediate use ✔ Live video demonstration available ✔ Direct delivery to your location 🚚 Delivery and support: European-wide transport Full logistics support Leasing / financing options available After-sales support ⭐ Why FT LOGISTICS? We deliver forklifts that work – not machines that sit idle in the workshop. ✔ Over 100 machines available ✔ In-house service and preparation ✔ Experience across Europe ✔ Hundreds of satisfied customers 📞 Contact us today FT LOGISTICS – Quality you can rely on. Service you can trust.

Year of construction: 2014, condition: used, This listing is for a 3M Zeta Plus 16EZA Encapsulated System Holder The unit is in excellent working condition and is ready for immediate release. The 3M Encapsulated System Holder is engineered to support Zeta Plus depth filtration and related downstream purification processes with optimal ergonomics, hygiene, and operational efficiency. It is specifically designed for biopharmaceutical and biotechnology applications where sterile, high-throughput filtration is required. This system holder accommodates encapsulated filter capsules—eliminating the need for a stainless-steel housing—and offers a pivoting, ergonomic frame that enhances operator safety and eases filter change-outs. Key Features Pivoting Holder Design – The housing pivots between horizontal (waist-height) for loading/unloading and vertical for filtration mode, reducing operator strain and minimizing fluid spills during replacement. Vertical Flow Path Retained – Preserves the proven vertical flow design ideal for depth filtration with 3M Zeta Plus filters and compatibility with 3M polisher or chromatographic clarifiers. Torque-Limiter Sealing – Built-in torque limiter ensures the capsule shell is properly sealed before operation, protecting against leaks or misassembly. Encapsulated Shell Architecture – Eliminates the need for an external stainless-steel cartridge housing, thereby reducing facility clean‑in‑place (CIP) or validation overhead. Shell Options – Offers translucent polycarbonate shells for visual liquid level monitoring or polyphenylene oxide shells capable of sterilization and sanitization. Multiple Flow Configurations Supported – Enables Bottom-In / Bottom-Out and Top-In / Bottom-Out modes to optimize media usage and filter performance. Scalable Modules – Available in pilot and full-production configurations, facilitating scale‑up from lab to manufacturing scale within a unified system design. Technical Specifications Parameter Description Model / Part No. Housing 16EZA1 Flow Path Vertical flow design, compatible with multiple flow directions Shell Materials Polycarbonate or polyphenylene oxide options (sterilizable) Holder Orientation Pivoting between horizontal (load/unload) & vertical (operational) Sealing Mechanism Torque‑limiter style sealing indicator Tsdpfx Aoxl Dy Nok Doa Operational Scale Supports systems from small pilot scale up to production scale (0.5 L to >2,500 L) Filtration Compatibility 3M Zeta Plus depth filters, 3M Polisher ST, 3M Emphaze AEX Hybrid Purifier, 3M Harvest RC, etc. Footprint Compact vertical footprint; reduced spatial demand in filtration suites Applications Clarification of mammalian cell cultures prior to downstream purification Protection of downstream membranes and chromatography resins via depth filtration Clarification of bacterial, yeast, or insect cell lysates Removal of host cell proteins (HCP), DNA, endotoxins, and particulates Pre‑polishing or polishing after capture chromatography Viral clearance modes in downstream workflows Benefits & Value Proposition Enhanced Ergonomics & Safety – The pivoting design reduces the need to lift used capsules overhead, lowering risk of spills and operator fatigue. Lower Validation Burden – Because the system is fully encapsulated, no external housing cleaning or validation is needed in the customer’s site. Operational Versatility – Flexibility in shell types, flow configurations, and scale continuity from pilot to production. Visual Process Monitoring – Translucent shell...

Condition: used, RMS Control and Measurement Technology – Vibration Test System with Accessories For sale is a high-quality set from RMS Control and Measurement Technology, including a Rietschle fan, ideal for vibration testing, resonance tests, and material examinations. Included devices: RMS CONTROL AND MEASUREMENT TECHNOLOGY – Vibration Exciter Type SW 6011 No. 2230 30 V – 200 A 13 mm / 1.2 m/sec / 100 g Mounting Frame Type SWT 6211/1 No. 6074 – stable fixture for test specimens Power Amplifier Type TGE 10‑1/7 – for optimal operation of the vibration exciter Rietschle SKG 410‑2.01 Fan – high-performance vacuum/pressure blower Condition: used Scope of delivery: (see picture) Todpszikdcofx Ak Dea (Specifications and technical details are subject to change and errors excepted!) If you have further questions, we would be happy to clarify them by phone.

Year of construction: 2013, operating hours: 7,700 h, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 12090, This is a recycling extruder with side feeding for materials (flakes, pellets, etc.). The system is supplied with a control cabinet and a double vacuum system. The pelletizing system is missing at the end of the screw – it is not included in the scope of supply. The cylinder ends at the flange. The extruder is supplied without a screw. The frequency inverter for the main motor was replaced with a new unit 3 years ago. Installed power approx.: 474 kW Cooling water requirement approx.: 190 l/min Fresh water consumption approx.: 110 l/h Feeding system: • Diameter of the feeding screw: 200 mm • Drive for the feeding screw: 45 kW, frequency-controlled • Hopper capacity net 7 m³/250 ft³, • Gear motor 3 × 3 kW • 2 sight glasses in the hopper • 2 level indicators Extruder: • Diameter of the extruder screw: 145 mm • L/D ratio: 24 • Heating power: 50 kW • Extruder drive unit 280 kW Vacuum 1: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 11 kW • Vacuum capacity: 225 m³/h • Vacuum pressure: 33 mbar Vacuum 2: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 7.5 kW • Vacuum capacity: 190 m³/h • Vacuum pressure: 33 mbar Cylinder: • Cylinder: Bimetal extruder cylinder, • Reinforcement layer 1.8–2.0 mm thick, • Hardness 63–65 HRC Todsznz Ezopfx Ak Dsa Installation conditions: • Voltage: 3 × 400 Volts • Permissible fluctuation max.: +5 % – 5 % • Frequency: 50 Hz Permissible fluctuation max.: +4 % – 4 % • Protective measure: Multiple grounding • Ambient temperature: min. 15 °C, max. 35 °C • Humidity max.: 90 % • Altitude of the installation site: 0 – 1000 m The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price is without packaging.

Year of construction: 2013, operating hours: 3,500 h, condition: used, functionality: fully functional, machine/vehicle number: 12400, TSM/tsi oscillating sieve machines are used for the classification, screening, and dust removal of bulk materials from almost all industrial sectors, such as stones and soils, chemicals, mining, pharmaceuticals, feed, and food. The machine for sale has a diameter of 1200 mm and is equipped with 3 sieve decks with mesh sizes of 3 mm, 1.4 mm, and 0.463 mm. In addition, spare sieves with the following dimensions are included: • 16 mm x 1 piece • 15 mm x 1 piece • 0.5 mm x 1 piece • 0.16 mm x 1 piece • 0.9 mm x 1 piece • 0.86 mm x 1 piece The drive has a power of 1.5 kW, 400 VAC, 50 Hz, 1450 RPM. The machine was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. Todpszmzbmefx Ak Dsa The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Year of construction: 2013, operating hours: 3,500 h, condition: used, functionality: fully functional, machine/vehicle number: 12399, TSM/tsi rotary vibrating screens are used for the classification, screening, and dedusting of bulk materials from almost all industrial sectors, such as stones and soils, chemicals, mining, pharmaceuticals, feed, and food. The machine offered for sale has a diameter of 1200 mm and is equipped with 3 screen decks with mesh sizes of 3 mm, 1.4 mm, and 0.463 mm. In addition, spare screens with the following dimensions are included: • 1 mm x 1 piece • 0.5 mm x 2 pieces • 0.17 mm x 1 piece • 1.4 mm x 1 piece Tedpfjzmzbgjx Ak Dea • 5 mm x 1 piece • 4 mm x 1 piece • 1.8 mm x 1 piece The drive has a power of 1.5 kW, 400 VAC, 50 Hz, 1450 RPM. The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production plant in Europe. The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 76900 € 1453.41 € 1015 mm 610 mm 1.000 x 400 mm 400 x 1.000 mm 1050 mm 5 - 25 m/min 0 - 2.250 mm/min mm 450 mm 480 mm 0 - 675 mm/min 0.001 - 0.04 mm 500 - 1.800 1/min 3.75 kW 1.5 kW 1.1 kW 1.1 kW 4280 mm 2080 mm 2100 mm 3500 kg 220 kg 440 kg 355 x 50 x 127 mm mm 10.4" graphic NC control on a swivel arm with touchscreen for: Operating mode selection Cycle selection and program creation Surface grinding Tedpfxjwiqyae Ak Doa Cross grinding Plunge grinding Dressing with automatic compensation Semi-automatic balancing in the machine Automatic spindle speed for constant surface speed Spindle load visualization Unbalance control Graphical status monitoring Alarm list aut. vertical feed servo drive for grinding wheel feed and table cross feed hardened slide ways in all 3 axes with needle rollers electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator autom. dressing attachment table mounted with compensation * grinding wheel grinding wheel flange grinding wheel balancing scale balance arbor LED machine lamp machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH * The exact configuration of the dresser must be clarified before ordering

Condition: good (used), Year of construction: 2006, Pallet racking system, Jungheinrich, frame height approx. 8m, 500kg/pallet location, approx. 4,632 locations – used: Price ex-location: €49,500 (net), disassembled, packaged and loaded! Price for larger quantities: upon request! Tedpfezd Tzyjx Ak Doa Hall 4 Manufacturer: Jungheinrich Type: B Year of manufacture: 2006 Number of frames: approx. 204 Upright profile: B13 Frame depth: approx. 1.10m Frame height: approx. 8.25m Frame width: approx. 8cm Beams: Length: 3.60m = approx. 1,908 Load capacity per level: 2,000kg = 500kg per pallet Bay load: 8,000kg at max. bay height: 2m In the event of complete purchase, including existing end-of-aisle protection/side protection, spacers, etc. Whether the grid decking shown is included needs to be clarified. Condition: good Available: from approx. September 2026 Location: Hamburg

Condition: used, Used GEA Westfalia model FSD 1-06-107 stainless steel disc bowl centrifuge. Clarifier design with total capacity 1 litre and solids holding space 0.5 litre. Heavy liquid 1.0 kg/dm3 and solids 1.4 kg/dm3 solids. Maximum speed rated 10,000rpm. Centripetal pump output up to 300 l/h depending on medium. Belt driven by 1.1 kW 220/380 volt 3/50 3,000 rpm motor. Mounted on skid with HMI control panel and stainless steel collection pot. New 2018. Tsdpfxezimv Ue Ak Dea

Condition: excellent (used), Year of construction: 2024, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 4803, type of input current: AC, overall weight: 2,200 kg, total width: 2,600 mm, total length: 2,600 mm, total height: 2,300 mm, input voltage: 400 V, power: 5.5 kW (7.48 HP), input frequency: 50 Hz, A nearly new GKM KTS 2600 DS with less than 500 operating hours. This is a tumbling screen machine with a patented adjustment for the three-dimensional movement, allowing the dwell time for each product on the screens to be individually adjusted. The main shaft is driven by an electric motor and V-belt. Technical data: • Tumbling screen machine with a 2600 mm diameter and 5 screen decks • Inlet DN 300, outlet DN 300, stainless steel • Screen lifter for easy removal • Approximately 4000 silicon balls for screen cleaning for difficult materials • Motor 5.5 kW, 400 VAC, 50 Hz • ATEX EXII-/3D Ex h IIIB T155°C design – Zone 20 inside, Zone 22 outside Tsdpfezl U Uwsx Ak Doa • Outlets are individually adjustable and adaptable • Installed screen sizes: 2 mm, 1 mm, 0.56 mm, 0.4 mm, 0.32 mm • Spare screens: 0.63 mm, 0.71 mm, 1.5 mm The machine was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner’s expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price is without packaging on a pallet.