Used Complete Paint Shop for sale (13,964)

Condition: new, Year of construction: 2026, It is a complete painting system, comprising the following components: 1) An oven with an air heater (the type of fuel can be adapted to the client's specifications). 2) A spray painting booth equipped with an absorbent filtration system suitable for even the most demanding paint applications. 3) Two parking areas where parts can be placed after painting or curing. Bsdpfxoyaqt Te Ak Holg 4) A rail system that enables easy movement of parts from one station to another. 5) A trolley for transporting the aforementioned parts. 6) A fully integrated and robust steel structure, engineered for high static stability and to minimize the risk of component failure. From both a design and technical specification perspective, the above installation constitutes a comprehensive and autonomous electrostatic painting line. For limited systems, there is an offer for the complete package at 115,000 euros.

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, machine/vehicle number: 01/3072/53, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Usable space: 38 m² Total steam volume: 29 m³ Total air flow: 20,333 m³/h Booth temperature: max. 40 °C Air exchange rate - painting: 3.2 f/min Air exchange rate - drying: 20.33 m/min Maximum permissible solvent load: 5,404 g/m³ Hazard class: A2 MACHINE DETAILS Power: 220 kW (299.12 HP) Overall length: 8,000 mm Overall width: 4,000 mm Bedpswlqxnsfx Ak Helg Overall height: 3,000 mm EQUIPMENT - Booth

Condition: excellent (used), Year of construction: 2001, Complete Parquet painting shop Manufacturer - SORBINI/ VIET Year - 2001 Capacity - 800 m2/shift Time of one cycle - 8 min. Bsdordgrvepfx Ak Helg Lenght of the line - 42 m

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, The Cefla iBotic lacquering machine is an advanced robotic finishing solution designed for high-precision coating applications in industrial production. Engineered for flexibility and efficiency, it uses intelligent automation to deliver consistent, high-quality lacquer finishes on a wide range of surfaces. Its programmable system allows for precise control of spray patterns, reducing material waste while ensuring uniform coverage. Ideal for manufacturers seeking to optimize productivity and finish quality, the iBotic combines cutting-edge robotics with reliable performance in modern finishing lines. Blsdpfx Akey E Huxe Hjg

Condition: used, 1 – Transport table with cleaning device (air blast device) – here, a brush runs across the entire width of the table and removes dust residues from the workpieces. 2 – Roller coating machine No. 1 3 – Roller coating machine No. 2 4 and 5 – UV lamp with conveyor – 1 lamp irradiates from above 6 – Brushing machine Quick Wood System RO1400 7 – Venjakob spray booth – equipped with two separate circuits with pumps as well as 8 spray guns. 8, 9, 10, 11, 12 – Drying tunnel with top air supply through nozzles, with the capability to control temperature and air supply in 3 zones. 13, 14 – UV lamp with conveyor – 2 lamps positioned at an angle to the workpiece, also cure the edges. 15 – 4-roller brushing machine with separate height and speed adjustment for each roller. 16 – Outfeed table for intermediate sanding 17 – Cleaning device (air blast device) for removing light dust from the surface 18 – Venjakob spray booth – equipped with one circuit, but can be converted to a second circuit by exchanging the entire rack with pistols (a spare rack is included), and switching the pump (two pumps are included with the set). 19 – Roller conveyor, prepares items for the dryer, controlled by light barriers 20 – Dryer with 14 levels 21 – 3D UV lamps Superfici, gallium and mercury 22 (not shown in the diagram) – Outfeed table with two speed settings, adjustable to the unloading speed of the paint line. Bledoy Em Hhopfx Ak Hjg

Condition: good (used), Year of construction: 1999, functionality: fully functional, For sale: complete production line for rotors and stators, including full assembly of the corresponding motors. Some of the brands/models: Promotech, Stihl, etc. Machines on the stator line include: stator core press, stator insulation insertion machine, dispensers for insulating plastic, stator winding machine, machine for cutting excess wire, tab welding machine, stator inspection station. Bledpfxjy Ddrro Ak Hsg Machines on the rotor line include: rotor core press, rotor insulation insertion machine, commutator press-fitting machine, rotor winding machine, rotor testing (rototest). Additionally: rotor varnishing machine, finishing operations (lathe for commutator and rotor core machining), balancing machine, cutting/sawing machine, rototest. Also includes: assembly line for complete motor assembly, DAKS device for motor testing, conveyor belt, packaging unit. For more pictures, detailed information, or any inquiries, we are at your disposal.

Condition: used, functionality: fully functional, Complete UV roller painting and finishing line for flat panels with: - maximum working width mm 1300 - maximum thickness mm 80 - minimum length mm 350 - feeding speed (m/min) 10 (from 5 to 20) - working height mm 900 - working side right - UV finishing types transparent, matt and semi-gloss Blsdpoywgmfofx Ak Hjg In attachment you’ll find a drawing and the line component and details for each equipment The line can be visited at 545600 Tarnaveni, Judetul Mures, Romania

Condition: like new (used), Year of construction: 2023, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 014860, feed rate X-axis: 3 m/min, workpiece weight (max.): 10 kg, working width: 1,350 mm, total length: 3,000 mm, total height: 80 mm, working height: 900 mm, power: 25 kW (33.99 HP), compressed air connection: 6 bar, Equipment: cabin, We are offering this nearly new Bürkle ROBUS eco surface spraying machine, year of manufacture 2023. Blodeyx H Eqepfx Ak Hjg

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 61115/1, Automatic painting line - Cefla, the machine is located at the Matis doo plant and is operational. Bsdjyuwvdepfx Ak Hjlg

Condition: good (used), GR6100 robot with hollow wrist Bledeyxmt Ujpfx Ak Hog Hollow wrist and axis 3 for routing paint hoses Flange for 3 spray guns Light barrier/reading barrier Connection for automatic color change

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: A1407003, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: cabin, For Sale: Complete Venjakob Surface Finishing Line We offer a complete Venjakob automated surface finishing line designed for high-efficiency coating, sanding, and drying of flat workpieces. This line is ideal for industrial applications requiring consistent and high-quality surface treatment (e.g. furniture, doors, panels). The Venjakob line consists of: Blodpfxexm Twto Ak Hog VEN TRANS BELT modules: 0100 / 0300 / 0500 / 0600 / 0800 / 1000 / 1200 / 1300 / 1350 VEN SAND BRUSH modules: 0200 / 0900 VEN SPRAY COMFORT modules: 0400 / 1100 VEN DRY AIR JET modules: 0700 / 1400 Technical data provided in the documentation.

Condition: new, Year of construction: 2026, total height: 3,000 mm, total length: 4,900 mm, total width: 2,400 mm, volume flow: 3.6 m³/h, type of input current: three-phase, power: 1.1 kW (1.50 HP), Equipment: cabin, Wet paint spray booth in cabin with extraction and supply air filter, lighting. Bledervi Rispfx Ak Hjg

Year of construction: 1993, condition: ready for operation (used), A complete paint shop is available. 1) Sergiani S.p.A. Monomatic S, year of construction: 2001. 2) Finnrose FLT 6, year of construction: 1993. 3,4,5) Three identical Bürkle DAL1-1300 presses, year of construction: 1993. 6) Karl Heesemann FGA 6 EX, year of construction: 1993. 7) Finnrose FLT-4.5, year of construction: 1993. 8) Bürkle DAL2-1300, year of construction: 1985. Hackemack KTR 2040, year of construction: 1996. All machines are part of a paint shop. On-site inspection is possible. Blsdpfx Aotpp H Eek Hsg

Condition: used, Truck dimensions (pallets): From 1 to 4) 140x110 h.120 Kg. 600 5) 140x130 h.40 Kg. 100 6) 150x100 h.90 Kg. 300 7) 320x100 h.120 Kg. 800 8) 320x90 h.80 Kg. 300 Inventory of parts: No. 69 pieces of 3 meters (total 207 meters) No. 1 piece of 2.80 meters No. 13 pieces of 3 meters (total 39 meters) No. 6 pieces of 1.80 meters (total 16.8 meters) nr. 2 pieces of 2.40 meters (total 4.8 meters) No. 1 piece of 1.50 meters nr. 2 pieces of 0.70 meters (total 1.4 meters) nr. 2 pieces of 1 meter (total 2 meters) No. 1 piece of 1.50 meters No. 17 curves of 1.20 linear meters (total 20.4 linear meters) with a pitch (diameter) of 1.15 meters Bodox Tuu Nopfx Ak Hjlg No. 6 curves of 0.3 meters (total 1.8 meters) No. 1 trailer with 1.50 meter track

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 3,500 mm, total length: 7,050 mm, total width: 4,100 mm, volume flow: 36,000 m³/h, temperature: 80 °C, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), Equipment: cabin, lighting, Paint and Drying Booth Bljdpfx Ajxa H Ewok Hog It is the centerpiece of your entire painting operation: the combined paint and drying booth. (Alternatively available as a separate paint booth with a dedicated dryer.) Our solutions feature full-surface ceiling filters and, optionally, full-surface floor extraction with drive-over grating or wall extraction at the position of your choice. If you wish to further increase the efficiency of the system beyond heat recovery and infinitely variable control via frequency converter, we can also offer you a sectional control system. This enables you, for example when doing spot repairs or partial booth loading (such as painting only add-on parts), to activate only the section where the parts are located. This allows you to operate with a reduced air volume, save energy, and minimize costs, all without compromising quality. Feel free to contact us – we would be happy to demonstrate these options in detail. Do you have any questions or suggestions? We are happy to assist you.

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, MAIN STANDARD Our paint booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. Booth processes are managed via a PLC system, ensuring that desired values are maintained consistently. OPERATING PRINCIPLES OF THE BOOTH Blodpfx Akjwzmcbo Heg The booth’s processes are managed through a control panel, which oversees the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) collect paint particles, and the air passes through final exhaust filters before being discharged. FLASH-OFF PROCESS After painting, the booth continues operating for approximately 15 minutes to purge residual solvents and thinners. During this phase, fresh air circulates from outside into the booth. DRYING PROCESS In this stage, 80% of the air passing through the booth is heated to 60°C and introduced via a distribution system. Since 20% of the solvent is released during drying, it is expelled with the exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted as needed via the control panel. COOLING PROCESS After the 30-minute drying cycle, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the subsequent 5-minute cooling phase, fresh air from outside circulates through the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels govern the functions and operation of machines and devices housed within the booth. The panel is made of durable galvanized sheet and steel profiles and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • Electrical wiring is designed to accommodate booth relocation if needed. • Operating equipment uses 380 V 50 Hz, while control devices operate at 220 V. • The booth’s operation time can be monitored on the electronic control panel, enabling straightforward maintenance scheduling. • Temperature and time settings for booth ventilation (solvent flash-off), intermediate drying, and final drying can be easily adjusted to required values on the digital display of the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 5,600 mm, total length: 11,200 mm, total width: 5,100 mm, type of input current: three-phase, warranty duration: 24 months, inner dimension height: 4,970 mm, inner dimension length: 11,000 mm, temperature: 80 °C, inner dimension width: 5,000 mm, air demand: 52,000 m³/h, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), power: 45 kW (61.18 HP), fuel: liquid petroleum gas (LPG), input frequency: 50 Hz, energy consumption: 45 kWh, insulation thickness: 50 mm, nominal power: 250 kW (339.91 HP), sheet thickness steel (max.): 2 mm, Equipment: lighting, * Air Preparation Unit: The air preparation unit is a recirculation system that supplies the cabin with filtered fresh air and exhausts used air during the painting process. It heats the air to 60 °C, mixes the used air with 10% fresh air via an automatic multi-damper system, and reheats the air before routing it back into the cabin. The air is heated using a burner and a heat exchanger, both made of high-quality 304 stainless steel and housed within the fresh air unit. During painting, the air is filtered twice (via front and ceiling filters) before it enters the cabin. The contaminated air is also filtered twice (through inlet and outlet filters) before it exits via the exhaust unit. Air preparation units are insulated like the side walls to minimize heat loss and are protected against potential vibration and noise thanks to rubber seals on the covers. The exhaust air is regulated by a damper in the outlet duct, which helps control the internal pressure of the cabin. * PRINCIPLES OF CABIN OPERATION: The processes in the cabin are controlled via a control panel that manages the following steps: * PAINTING PROCESS: During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled by the extraction unit. Floor filters (paint stops) capture paint particles, and the air passes through the final exhaust filters before being discharged. * FLASH-OFF PROCESS: After painting, the cabin operates for approximately 15 more minutes to purge residual solvents and thinners. During this phase, fresh air from outside continues to circulate in the cabin. * DRYING PROCESS: In this phase, 80% of the air passing through the cabin is heated to 60 °C and supplied to the cabin via a distributor. As 20% of the solvent is released during drying, these solvents are expelled with the exhaust air. Industrial coatings are typically dried at 60 °C, but the cabin temperature can be adjusted via the control panel as required. * COOLING PROCESS: After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the cabin, after which the system stops automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT: These control panels manage the functions and operation of all machinery and devices inside the cabin. The control panel is constructed from durable galvanized sheet metal and steel profiles and is fully enclosed to protect against dust and moisture. Bljdpfxswzl Hxo Ak Hjg Electrical devices and control panels: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control lines between the panel and motors or other electrical devices. • Electrical wiring is designed to allow for cabin relocation if necessary. • Operating devices use 380 V 50 Hz, while control devices use 220 V.

Condition: good (used), Year of construction: 2003, The painting unit with heat exchanger and blowing for drying was used in the production of stairs and carpentry elements Bsdpouyy A Dofx Ak Hjlg Paint wall also with extraction in the floor with a total length of about 7 mb equipped with three extraction fans

Condition: new, AUTOMATED PAINT SHOPS These are the paint shops where your product is designed and manufactured by our engineers in line with your capacity, use area and other demands. Maximum efficiency is aimed to be provided with minimum staff and the least space usage at electrostatic powder coating or wet paint, sandblasting, varnishing, glazing, coating, washing and similar system requirements. Bjdpfx Aedy Ez Ijk Hjlg

Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: lighting, Modern painting systems and drying rooms must meet higher requirements than just a few years ago. The use of new coating systems, such as hydro-based paints, polyurethane resins, and epoxy-zinc powder or epoxy-iron glitter paints, demands advanced paint room solutions. A key aspect is the workpiece transport to the painting system and further processing. Our engineers offer expert guidance, whether it's dry overspray removal, wet washing, air humidification, or air drying, condensation drying at low temperatures, or hot air drying. We also provide pre-treatment solutions such as high-pressure washing with water circulation systems or compressed air blasting or wheel blasting techniques. Key Components of a Modern Painting System: Painting Booth: The key element of our system, equipped with advanced air filtration and ventilation systems to ensure a dust-free environment for top-quality results. 🎨 Air Treatment: Essential for maintaining the air balance in the spray booth by drawing in filtered air to replace the air exhausted by the ventilation system. 🌬️ Exhaust System: Removes overspray and volatile organic compounds (VOCs) from the booth, ensuring good air quality and operator safety. 🌿 Drying & Curing Oven: After painting, parts are transferred to the oven to cure and obtain a durable, high-quality surface. 🔥 Conveyor System: An automated conveyor moves parts from the spray booth to the oven, ensuring efficiency and consistency. 🚜 Control Panel: The brain of the system, where the operator controls everything from ventilation to temperature and conveyor speed. ⚙️ Bedpfx Ajun R Ufok Hjlg Lighting: LED-based lighting provides excellent visibility while also offering energy savings. 💡 Why Choose Our Painting & Drying Systems: Quality: Carefully designed with advanced features to ensure greater efficiency and performance. 🎯 Safety First: Efficient exhaust systems, fire suppression, and fire-resistant materials ensure a safe working environment. 🛡️ Customization: We offer customizable solutions that cater to your specific needs and preferences. 🛠️ Easy Maintenance: Our systems are designed to be easy to maintain, with durable and easy-to-clean materials. 🔧 Excellent Support: We provide top-notch customer service and technical support for installation, troubleshooting, and optimal maintenance. 🧰 Environmental Responsibility: Our systems are designed to be energy-efficient and environmentally friendly, minimizing pollution and making them a sustainable choice for surface treatment. 🌍 Complete Solutions for Painting Systems: Conveyor Systems: Automated transport systems for painting and blasting booths, with intersections and switching systems for parts up to 2000 kg. 🚛 Easy-to-Replace Filters: Painting booths with ceiling exhausts and easy-to-replace filter elements. 🧹 Versatile Heating & Drying Solutions: Heating options include oil, gas, or electrical heating, as well as cross-flow heat exchangers and activated carbon filters for solvent-heavy processes. 🌡️ Integrated Paint Supply System: An integrated paint supply system with airless pumps for full coverage in the painting booth. 🎨 Our complete solutions provide everything you need for efficient and safe painting operations. Get in touch with our experts today to optimize your painting system!

Condition: new, Powder Coating Systems For years, powder coating has been continuously evolving as an alternative to wet painting, and it has recently gained increasing importance due to its lower environmental impact—specifically the absence of solvents and paint sludge. Powder recovery further boosts the efficiency of these systems to a particularly high level. For users, powder coating offers the advantage of creating an extremely durable and corrosion-resistant surface that is significantly more impact-resistant than what traditional painting can achieve. Additionally, post-processing tasks such as grinding or drilling the powder-coated parts present no problems, as the coating will not chip off. Pony Luxury Coating powder coating systems provide you with tangible advantages: they are efficient, environmentally friendly, and—as always—unsurpassed in flexibility. We achieve this through a range of system types. Manual Powder Coating Systems Manual coating systems are the ideal solution for complex and demanding workpieces. Thanks to skilled operators, these systems offer continuous adaptation to changing conditions and varying product sizes. Flexibility is paramount—with the added benefit of an attractive entry price into the world of powder coating. Large-Scale Powder Spray Booths No matter how large or challenging your workpieces, our systems are larger! In the commercial vehicle and utility sector, where components are exposed to significant stress, powder coating has established itself as the ideal solution. To accommodate ever-larger components, we offer our large-scale powder booth, which supports unlimited manual coating, and, when combined with a conveyor system, handles any workpiece size with ease. Automatic Powder Coating Systems If your operation requires high throughput and rapid processing, an automated powder system is the way forward. Coupled with a conveyor, light barriers allow precise detection and, consequently, exact powder dosage to ensure maximum efficiency. The system can also be equipped with lifting stations and robots to handle even the most complex components. Powder Curing Ovens & Flash-Off Dryers Bedpfxjxa Hzxe Ak Helg These provide the perfect finishing touch to powder coating: the curing oven. Our ovens feature the highest insulation class, ensuring consistent, high efficiency. Detailed temperature control also enables use as a flash-off dryer to dry substrates after pre-treatment. Temperatures up to 250 degrees Celsius are possible, which allows usage as a tempering oven, for instance with hot-dip galvanized materials. Of course, typical use as a powder curing oven is straightforward. Optimal air distribution and a visualized control panel prevent over-baking, and even allow multiple color shades to be cured in a single process. Do you have questions or suggestions? We are happy to assist you!

Condition: new, Equipment: cabin, Stationary small parts spray booth Dixi █████ Achieve perfect and uniform coating of small parts. The extraction system ensures optimal results even in the smallest spaces. Optionally equipped with a turntable or a wheel holder, as well as a compact yet powerful extraction unit, it is perfectly suited for processing small workpieces and wheels. The side panels effectively limit the distribution of overspray, allowing work to be carried out in confined spaces without contaminating surrounding areas. Integrated lighting is also available as an option. Additionally, thanks to its low weight and minimal connections, the booth can be relocated to a new site in no time, ensuring your flexibility at all times. The system comes fully pre-assembled and ready for immediate use. Your Benefits Bljdpfx Aoxa Hx Rok Heg Thanks to its compact design, flexible dimensions, and versatile accessories, this booth offers a broad range of applications. The sophisticated modular system requires minimal space and is therefore suitable for use in virtually any premises. Different filter media and stages enable highly efficient operation, while filter changes can be performed in just a few minutes. Application and Safety Processing of both water-based and solvent-based coating materials is enabled by the use of ATEX-certified explosion-proof motors. It can also optionally be used for spraying adhesives. The large filter surface ensures uniform extraction throughout the process.

Condition: ready for operation (used), Year of construction: 2006, working width: 150 mm, overall weight: 150 kg, Conveyor Belt 2500 mm Manufacturer: Makor Type: TEP 2500 Powered conveyor belt from a finishing line (positioned in front of a Makor profile spraying machine), Length approx. 2500 mm Belt width: 150 mm Pass-through width (with existing side guides): max. approx. 320 mm Feed speed steplessly adjustable via variator Equipped with stable, adjustable side guides Dimensions approx. 2500 x 550 mm (LxW) Bledpfsxtnfrox Ak Hsg Weight approx. 150 kg Documentation available

Condition: ready for operation (used), COMPLETE KRONES PET BOTTLES ASEPTIC FILLING LINE FOR FRUIT JUICE/BEVERAGES AND SPRITZERS. SUITABLE FOR STILL AND CARBONATED PRODUCTS. YOM 2002-2007 CAPACITY: 0,5L x 36.000 BPH 1,0L x 30.240 BPH 1,5L x 25.200 BPH BOTTLE CLOSURES 28mm. THE LINE INCLUDES BOTTLE BLOWING, FILLING, LABELING, PACKAGING AND PALLETIZING: 1. Control unit: Ruland 2002, touchscreen, flash heating & CIP/SIP 2. Pasteur: Ruland 2002, tube heat exchanger, 1315 L supply tank, max. 21,800 L/h 3. Sterile tank: Roth 2002, 11,000 L 4. Carbonization: Roth/Ruland 2002, 2575 L, disconnected 5. Nitrogen system: Terboven/ISTE 2002 6. Hygienic center: Ecolab/Lang 2002, CAF, no PLC 7. Sterile water system: Roth/Ruland 2002, 9,000 L/h, buffer 2575 L 8. Sterile water system: Roth/Ruland 2002, 9,000 L/h, buffer 2575 L 9. CIP/SIP: Ruland 2002, 20,000 L/h, 1315 L supply tank 10. Cleanroom: Weiss 2002, ventilation/overpressure 11. Preform hopper: Dieterle 2002, MD3 12. Preform feeding: Tanner 2002, HFT 4730 / RGT 1624 13. Blow molding: Krones Contiform S16 2002, 16 stations, 1.0–20,000 b/h 14. Air conveyor: Krones 2002, automatic rail adjustment 15. Cap conveyor: Gassner 2002, 2 container positions, cap elevator 16–18. Filling machine: Krones CAF VODM 100 2002, injector (60), rinser (80), filler (100), capper (20), 1,0–20.000 b/h, 28 mm caps, still/carbonated 19. Label check: Krones 2002, incl. in Prontomodul Bedpfx Asxm Rwqsk Hslg 20. Bottle check: Krones 2002 21. Conveyor: Krones 2002, air blower before labeling 22. Labeling machine: Krones Prontomodul 2007, max. 35.600 b/h 23. Canmatic module: Krones 2007, paper labels 24. Contriroll module: Krones 2007, film roll 25. MHD coding: Videojet Excel/170i 26. Shrink wrapper: Krones Variopak 2002, 0.5–36,000 b/h, carton feeder & film transport 27. Packaging conveyor: Krones 2002 28. Handle applicator: Twinpack MHTE 2002 29. Empty pallet magazine: Krones LPM 2002 30. Palletizing: Krones robot 3A loader 2002, 4,000 packages/h 31. Pallet conveyor: Krones 2002, transfer cart & turner 32. Empty pallet magazine: Krones LPM 2002 33/34. Pallet stretch wrappers: Franpak 2002, top sheet applicator 35. Tying machine: Bornbinder HB 2002 36. Pallet coding: Logopak EAN 128 2003 THE LINE IS STILL NOT DISMANTLING, EXCELLENT CONDITION. LOCATION - GERMANY.

Condition: like new (used), Year of construction: 2014, Complete Bottle Filling Line for non-aseptic milk and other dairy product Capability 270, 540 ml PET/Plastic bottles with the cap D- 38 mm Bottle size: 270mm: D-60mm, H-132mm 540mm: D-70mm, H-180mm Capacity: 270mm: 2500 bottles per hour 540mm: 2000 bottles per hour Made by SELO, Netherlands. YOM 2014 Consisting of: 1. 2x Accumulation Tables Blsdsyiptqopfx Ak Hsg 150 cm diameter Motorised 2. Rotary Bottle Washer 15 bottle capacity Siemens Logo TD touch screen With Associated Conveyor 3. Selo 6 Head Filling Machine 6 head fully automated filling station With Selo pressure tank Schneider touch screen control Pump and associated pipework 4. Capper Rotary 3 Head fully automated bottle capper with Mobile Cap Hopper/ Swan Neck cap Feeder 5. Albertina/Etipak In Line Labeller 6. Associated conveyors AS NEW CONDITION