Complete painting plant

CM Macchine TIN-EVO 300/10 + RMS 40×800

Condition: used, Year of construction: 2009, SECOND-HAND BRIQUETTING MACHINE PRODECO MOD. L70- CE RULES - Briquet diam. 70mm - Production 50-120kg/h Dkodpswrddqjfx Akzjp - S/N 89 - Year 2009 (CE) - Complete with manual

Condition: refurbished (used), DIFFERENT TYPE OF MOTOR AND SLIDE for CELASCHI DET SECOND-HAND, FULLY RECONDITIONED Djdpfx Asdvlcyjkzokp

Year of construction: 2001, condition: like new (used), Double-aggregate grinder, two lower aggregates 2 x7.5 kW main power, 4 kW feed, lifting and lowering 2 kW, the machine after renovation, conveyor belt in very good condition. New graphite shoe. The machine has two aggregates from the bottom, contact rollers rubber first shaft second Combi system with graphite runner. Working width 630 mm. Two feed speeds slower faster. Length of grinding belt 1900 mm. Pneumatic oscillation. Tensioning the belts pneumatically. Speed of grinding belt 18 m / s. grinding shoes 1. Declaration of conformity CE power 21 kW nominal whole. Machining height 160 mm. Maszyan has two lower working shafts. Transport tape top system. Dkedpfsfxpbmex Akzsp

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Dedjv Si Szepfx Akzokp Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Year of construction: 1997, Line 3 Stenner MHS9 machines from 1997 Dodpfxow Nrhke Akzokp

Condition: used, machine/vehicle number: 008116, Max. machinable height: 120 mm Max. forward feed speed: 25 m/min Djdpfx Akew Iddzszskp Operator shafts number: 6

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: AN2018080, total length: 12,860 mm, total width: 4,806 mm, type of input current: three-phase, input voltage: 400 V, feed length X-axis: 3,000 mm, working width: 350 mm, power: 25 kW (33.99 HP), TRC 1500 – Timber Repair & Cosmetic Machine Technical Description • System Overview • Process Workflow System Overview The Wintersteiger TRC 1500 is a fully automated industrial system designed to detect, repair defects in wooden boards. It combines advanced 3D scanning, high-pressure thermoplastic injection technology to deliver consistent, high-quality repairs at production speed. Defects are repaired with thermoplastic filling material using injection and application units. No filling material is wasted thanks to the precise calculation of the filling quantity and precision injection. the edges can also be filled. Key Features • Automated 3D laser triangulation defect detection • High-pressure thermoplastic injection for durable repairs • Precision finishing unit for cosmetic perfection • Independent melt temperature zones with 8 kg tank • Closed glycol-water cooling system for controlled solidification • Ethernet-based control system with remote maintenance • Unlimited product profiles and intuitive scanner interface Product Range (Workpiece Specifications) Length 500–3000 mm Width 100–350 mm Thickness 3–30 mm Production speed upto 10 m/min – depending on number and sizes of defects Filling System – Injection & Application Units • Injection Unit: • 3-axis positioning (X/Y servo-driven, Z pneumatic) • Pressure-regulated melt feed • High-pressure injection • Application Unit: • 3-axis control • Fine finishing of repaired areas Faulty Spot Eye Scanner • 3D laser triangulation and high-speed camera system. • Detects defects from approx. 1 mm depth • Automatic height adjustment • 2D + 3D measurement • Adjustable parameters for wood types Melting Unit • 8 kg tank • Independent temperature zones • Integrated piston pump for constant pressure Cooling Unit • Closed glycol-water circuit • Stable temperature control Control System • Ethernet-based communication with remote maintenance • Access to PLC, scanner, servo drives • Energy-efficient regenerative drive technology Scanner Software • Processes 3D light-section profiles • Calculates defect volume and coordinates • Unlimited product programs • Intuitive operator interface High-Pressure Injection Process 1. Melting of thermoplastic material 2. Pressure and temperature regulation 3. Targeted injection into defect 4. Immediate cooling 5. Minimal surface residue • Benefits: • Low material usage • Excellent adhesion • No alteration of surrounding wood structure System Architecture • Melting unit Dkedpox Dmdhsfx Akzep • Heated hoses • Injection head • Cooling plate • Cooling unit with supply/return flow

Condition: like new (used), Year of construction: 2022, As-new condition (only 5,000 m² of parquet processed so far), compact oil application line consisting of: Roller Application Unit: - For the application of oils, etc. - Touchscreen control - Manual height adjustment - Max. working width: 300 mm - Max. workpiece height: 50 mm - Membrane pump with max. capacity of 18 l/min - Frequency inverter for variable speed of application roller - Frequency inverter for variable speed of counter-roller - Conveyor belt speed adjustable: 3 to 14 m/min - Stainless steel recovery trays Pad Group + Brush Group: - For spreading and removing excess oils - Touchscreen control - Manual height adjustment - Conveyor belt speed adjustable: 3 to 14 m/min - Max. working width: 300 mm - Max. workpiece height: 50 mm - Pad diameter: 300 mm - Quick-change system for pads - Brush dimensions (L x D): 300 x 160 mm - Quick-change system for brushes UV / LED Unit: Djdpfx Asx Ah A Ajkzekp - Touchscreen control - Manual height adjustment - Max. working width: 300 mm - Max. workpiece height: 50 mm - UV-LED power: 12 Watt/cm² - Incl. ventilation fan - Conveyor belt made of Kevlar fabric - Conveyor belt speed adjustable: 3 to 14 m/min Outfeed Conveyor Belt: - Length: approx. 2,500 mm - Max. working width: 300 mm - Conveyor belt speed adjustable: 3 to 14 m/min Note for used machinery: • Technical details and prior sale subject to change and errors. • Stated prices are ex works - free loading! • The machine has been cleaned and functionally tested. • All machines are sold as inspected, without any warranty claims. Buyers are free to inspect the machine at its location. • Special agreements are only valid in written form. (We only respond to enquiries with your address and telephone number!)

Condition: like new (used), Year of construction: 2020, We offer this second hand IWT Moldrup-SPP Hydro-Thermal Treatment Plant Industrial MOLDRUP-SPP plant designed for hydro-thermal modification of timber up to 2,600 mm diameter and 12,000 mm length. Built in heavy-duty stainless steel and engineered for continuous industrial production with fully automatic PLC control. Industrial Hydro-Thermal Wood Modification Plant – Ø2,600 x 12,000 mm Industrial hydro-thermal treatment plant designed for efficient and uniform thermal modification of timber in a controlled oxygen-free environment. The plant is built around a heavy-duty Ø2,600 mm × 12,000 mm stainless steel autoclave, handling approximately 15–22 m³ of timber per charge, with operating pressure up to 12 bar (abs). Fully automated via PLC, the system enables precise control of vacuum, pressure, temperature and multi-phase process cycles. The integrated vacuum system ensures safe oxygen removal, while the thermal oil heating system provides accurate temperature management throughout the treatment process. The complete installation includes pressure vessel, heating system, vacuum pump, circulation fan, condensate handling, trolley loading system and safety equipment. Thermal oil boiler skid and emission control equipment are included. Technical documentation available on request. Djdeymxqaspfx Akzjkp The complete hydro-thermal wood treatment plant is sold as seen / as is. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 000247, GLUE MACHINE FOR SINGLE-COMPONENT POLYURETHANE ADHESIVE. SPECIAL FOR GLUING LAMELLAS OF LAMINATED BEAMS • Maximum gluing width: 300 mm • Gluing head divided into 3 combs, each 100 mm and controlled by solenoid valve • Glue cord pitch: 10 mm • Tray with non-stick liquid that automatically closes the combs when the machine does not dose • Glue dosage: 100 to 200 gr/m2, as determined Dodpfxst Nfare Akzjkp • Gear metering pump • Glue viscosity range: 10.000 to 30.000 mPas • Drag speed: 7 to 15 m/min • Support for 200 l barrel • PLC control, with touch screen. KINCO brand • Machine from the GLUESTREAM company • CE rules • Machine manufactured in 2021 and assembled in May 2022. Like new, it has worked less than 50 hours WE ALSO HAVE THE HYDRAULIC PRESS TO MAKE GLULAM BEAMS, ALMOST NEW MACHINE