Used Cross Support for sale (16,972)

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, turning diameter: 295 mm, spindle speed (max.): 3,000 rpm, travel distance X-axis: 250 mm, travel distance Z-axis: 750 mm, controller model: Hurco WinMax V11, TECHNICAL DETAILS Swinging diameter over cross slide: 402 mm Swinging diameter: 295 mm Spindle speed (max.): 3,000 rpm Travel in X-axis: 250 mm Travel in Z-axis: 750 mm Driven tools: VDI 40 Speed of driven tools (max.): 4,000 rpm MACHINE DETAILS Control system: Hurco WinMax V11 Lajdpfx Abozy Iknsysg Machine weight: 5,000 kg EQUIPMENT Renishaw tool measuring arm Internal cooling: 20 bar

Condition: used, Upper support, cross support, cross table, cross slide table -Upper support comes from a Waldrich Coburg portal milling machine type: 12 D 3232-550 HL Lasdsct Aa Rspfx Abyog -Table surface: mm -Travel: x 350 mm/y 220 mm -Dimensions: 1380/1000/H800 mm -Weight: 800 kg

Condition: good (used), Cross support, cross support, cross table, cross-sliding table Lsdpfsg Dg Rpox Abyeag -Manufacturer: Kunzmann, top head from milling machine type UFV 600 -Dimensions: 530/420/H730 mm -Weight: 80 kg

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Laodpfszp H R Eex Abysg Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Year of construction: 2015 Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opening line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in the hydraulic oil tank Control cabinet heating Oil cooler for hydraulic unit Explanation for the short operating time: The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Brief description of the bale opening process: The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Condition: like new (used), Year of construction: 2019, Technical Data: Cross-cutting line with punching unit Strip running direction from the operator's side: right to left Coil changing side in strip running direction: left Operator's side, straightening machine in strip running direction: left Raw material: • cold-rolled strip: S320GD; S350GD; S380GD (strip-galvanized structural steels) • plastic-coated steel strip • aluminum • basically dry surface or commercially oiled • laminated strip • stainless steel Uncoiler: Type: Power Coil M-BS 1600 2 coil loading stations The coil storage track is designed so that a distance of 900 mm remains between 2 coils with an outer diameter of 1600 mm Loading semi-automatic Strip width 200 – 1600 mm Max. coil weight: 16 tons Coil diameter inside uncoiler: 508 - 610 mm Coil diameter outside uncoiler: 900 - 1600 mm Spreading range 470 – 625 mm Machine frame movable on linear guides Spreading hydraulically Strip withdrawal from the coil automatically Coil side guidance automatically, 4-point coil side guidance Press roller, rubberized, centrally positioned on the strip, hydraulically Electrical locking of lifting and traversing movement Control system: Control concept LBF – Control Concept LSV SCHULER Cross-cutting shear: Type: SCHULER HSU-1600 Shear gap adjustment is carried out by motor The shear is used to cut the strip end at a right angle before processing the first part of a production sequence. Bridging roller bed: Arrangement of the bridging roller bed upstream of the straightening machine Type: VOMA C1600 N Passage, max. strip width 1600 mm Length of bridging roller bed 1050 mm Material running height in the straightening machine 1600 mm Straightening machine: Type: SCHULER SVH 12-53-70-96 / 160-1600 Straightening speed max. 60 m/min. Straightening speed min. 5 m/min. Number of straightening rollers 12 pcs. Diameter of infeed rollers 160 mm Diameter of straightening rollers 3 x 53 mm, 3 x 70 mm, 6 x 96 mm Loop radius 1600 mm Material running height in the straightening machine 1600 mm Strip side guidance automatically Support rollers to prevent roller deflection All-roller drive Looping unit: Threading process in the direction of roller feed via looping bridge, remote-controlled Automatic loop control for continuous straightening process Loop depth below floor approx. 2,500 mm 4-point guidance through 2 sequentially arranged strip side guides To increase feed accuracy, the feed length is recorded by means of a measuring wheel (arranged in front of the feed rollers) Roller feed: Type: SCHULER AC-RP-160-1600 Lodpfezzrutox Abyeag Feed rollers, diameter 160 mm Loop radius 1600 mm Material running height above floor 1200 mm Drive, upper and lower roller, servo drive via a common distributor gear Special coating of the feed rollers Max. acceleration 15 m/s² Brake rollers: Brake rollers generate the strip pull during the rewinding of the strip material from the system onto the coil, in a generator-like manner Adjustment system hydraulically Punching unit with NC tool holder: Type: SCHULER HSU-1600 Design: Double C-frame Punching unit designed as 2 C-frame units, which can be traversed transversely to the strip direction by means of 2 servomotors, for accommodating the punching tools Number of punching tools per side max. 6 pcs. Punching tool, servomotor-driven, 90° rotatable 1 punching cylinder per punching tool Punching force min. 580 kN Max. hole diameter ∅ 90 mm for material thickness 4 mm Manufacturer of punching tools: WILSON TOOL Elevating table: Type: LAWE

Year of construction: 2022, condition: used, functionality: fully functional, Single-Use Support Ultra-Freezer RoSS.FRDG Temperature range: +10° to -80°C Capacity: up to 300L Shelf system for 20L Meissner containers included Highest storage density for frozen biopharmaceuticals Easy installation and loading with frozen active ingredients Net weight: 600 kg Lsdpezhuuvofx Abyjag Currently, up to 5 units are available for sale. The units are currently out of service and stored. The new price per unit was >40,000 EUR.

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 1,332 h, construction height: 180 mm, construction width: 220 mm, No minimum price—guaranteed sale to the highest bidder! Markforged Metal X TECHNICAL DETAILS Printing process: ADAM – Atomic Diffusion Additive Manufacturing Build volume: 300 × 220 × 180 mm Max. part size: 250 × 183 × 150 mm Max. part weight: 10 kg Layer height after sintering: 50 µm and 125 µm MACHINE DETAILS Supported materials: Copper, 17-4PH stainless steel, Inconel 625, H13 tool steel, D2 tool steel Print chamber: heated Print bed: heated, vacuum-sealed print plate, automatic print bed leveling Printing system: two nozzles for metal material and release material Dimensions & Weight Dimensions: 575 × 467 × 1,120 mm Weight: 75 kg Power supply: 100–120 / 200–240 V AC Current consumption: 12 / 6 A Connection: IEC 60320 Type C20 Operating hours: 1,332 h EQUIPMENT Markforged Wash-1 Debinder Markforged Sinter-1 Sintering System Markforged Wash-1 TECHNICAL DETAILS Debinder Supported materials: all metals Cleaning media: Opteon SF79, Opteon SF80, or Tergo Metal Cleaning Fluid Control: integrated control system Workpiece holder: Stainless steel basket Washing area: 356 × 254 × 203 mm Washing volume: 18,356 cm³ MACHINE DETAILS Power supply: 110–120 V AC, single-phase Current consumption: 11 A Peak power consumption: 1,320 W Dimensions & Weight Dimensions: 609 × 685 × 1,067 mm Weight: 136 kg FEATURES Integrated control system Stainless steel basket Shut-off at low fluid level Shut-off at high vapor pressure Markforged Sinter-1 TECHNICAL DETAILS Furnace specifications Supported materials: chemically debound parts printed with Metal X Heating element: Kanthal Control: preprogrammed automatic cycle control Sintering cycle: 26 h Laedpfxezx Rkbj Abysg Max. internal temperature: max. 1,300 °C Sintering capacity: 141 mm inner diameter × 305 mm length Sintering volume: 3,020 cm³ Sintering surface area: 348 cm² for a ceramic setter plate Setter plate dimensions: 11.4 × 30.4 cm Process gases: argon, argon-hydrogen mixture Retort: high-purity, carbon-free refractory retort MACHINE DETAILS Exhaust air requirement: 100–150 CFM, external exhaust Power supply: 200–240 V, single-phase Current consumption: 30 A Recommended circuit breaker rating: 50 A Dimensions & Weight Dimensions: 1,270 × 510 × 720 mm Weight: 136 kg FEATURES Pre-programmed automatic cycle control Kanthal heating element Ceramic setter plate High-purity, carbon-free refractory retort

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: 21-06-12-054, functionality: fully functional, operating hours: 385 h, actuation type: electric, Equipment: CE marking, saw blade guard, scorer, Available from April 1, 2027, for self-disassembly and self-collection. The machine features ProDrive control with a 3.5" color display and a separate keyboard. The height and swivel adjustment of the saw unit are motor-driven. The CNC-controlled parallel fence enables a cutting width of 1,300 mm. Equipment / technical data: • Machine height 910 mm • Control panel at eye level • ProDrive control with 3.5" color display • Main motor 5.5 kW (7.5 hp) VARIO • Stepless speed control, approx. 2,000–6,000 rpm • Saw unit that can be swiveled to one side, 0–46° • Extended cutting height for saw blade diameters up to 500 mm • AKE quick-change system for the main saw blade • 2-axis scoring unit • Motorized height and lateral adjustment of the scoring unit • Scoring unit motor 0.75 kW / 8,200 rpm • LED lighting in the area of the scoring unit • Table extension 840 mm • Double roller carriage 3,800 mm with floor support • On/off switch on the double roller carriage • Angle miter fence, length stop up to 3,500 mm • Two individual folding stops • Extendable cross slide extension, extendable to 650 mm • CNC parallel fence, cutting width 1,300 mm • Travel speed of the parallel fence 250 mm/s • Automatic dimension correction depending on the fence profile • Front support roller, 300 mm wide • DUPLEX 1350 mm double-sided miter fence • Template holder directly on the control panel • 99 storable cutting programs • Operating hour counter • USB interface • 400 V / 50 Hz Special equipment: 3,800-mm double roller carriage, CNC parallel fence 1,300 mm, 2-axis scoring unit, VARIO drive, and the DUPLEX miter fence. Inspection and test run possible by appointment. Laedpfx Ajz Ah E Rebysg

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: Custom made, type of input current: three-phase, total width: 1,800 mm, total length: 14,650 mm, input voltage: 400 V, input current: 16 A, cutting width (max.): 1,800 mm, 22 C – Finn-Convey Industrial Spreading Line (14.65 m x 1.8 m) – Complete with Air-Flotation Description For sale is a professional-grade Finn-Convey industrial fabric spreading and cutting table line, offered as a complete production-ready system. This system is designed for efficient fabric spreading and preparation in high-volume cutting room operations. It enables controlled handling of heavy fabric rolls, precise layer alignment, and smooth material flow prior to cutting. The line has been operated as part of a dedicated production setup together with a Bergman cross cutting saw (unit 114 A). This combination allows efficient pre-cutting of fabric rolls into required lengths before spreading, significantly improving workflow efficiency and reducing manual handling. The equipment has been used in a professional garment factory and was operational prior to factory shutdown. Key Technical Specifications • Total length: 14.65 meters (modular structure, adjustable configuration) • Table width: 1.80 meters (suitable for wide fabrics) • Technology: Air-flotation table system for low-friction material handling • Drive system: Motorized side drive units ensuring controlled spreading tension System Components • Finn-Convey motorized side drive units • Industrial air-flotation table structure with perforated surface • Integrated blower system with centrifugal fans under tables • Electrical control cabinet for system operation • Fabric roll handling stands and support assemblies • Integrated end cutting unit with circular blade system Cutting Unit Technical Details Laedoy Au Alopfx Abyjg • AC speed-controlled motor (Taili Motor Co., Ltd., approx. 90–200W range)14650 • Gear reduction unit (e.g. 5GN-series) for high torque output • Circular cutting blade with integrated sharpening mechanism • Adjustable vertical guide rails for cutting height positioning • Designed for efficient cutting of multi-layer fabric stacks Auxiliary Drive Components • Auxiliary induction motor (e.g. 40W class, speed-controlled) for fine positioning and movement control • Gear-driven transmission for stable and continuous operation • External capacitor-based start system (typical for single-phase auxiliary motors) System Architecture • Modular table construction allowing flexible layout adjustments • Air-assisted material movement reducing friction and operator effort • Cradle-type roll handling enabling tension-free fabric feeding • Encoder-based or mechanical length control depending on configuration • Compatible with upstream roll cutting equipment and manual or semi-automatic workflows Production Advantages • High efficiency with long cutting layouts and reduced material waste • Excellent ergonomics, heavy fabric stacks can be moved with minimal force • Accurate layer alignment supported by controlled drive system • Integrated cutting capability improves workflow continuity • Suitable for a wide range of materials including denim, upholstery, and technical textiles Condition Used industrial condition Removed directly from production after factory shutdown Typical signs of use from industrial environment Inspection possible prior to dismantling Sold as-is, where-is, without warranty Location Valga, Estonia Removal & Transport Buyer responsible for dismantling, loading, and transport Professional dismantling strongly recommended due to system size and electrical installation

Condition: like new (used), Year of construction: 2024, functionality: fully functional, For sale is a like-new Hundegger Speed-Cut SC480, including a fully automatic loading system, Pick & Feed 1000. Speed Cut SC480 Processing range: - Timber cross-sections from 20 × 40 mm to 240 × 480 mm - Timber lengths up to 13 m Equipment: - 5-axis sawing unit - Infeed and transfer cross conveyor for timber lengths up to 13 m - Hydraulic lifting table for timber lengths up to 13 m - Combination support for vertically operating tools - Drilling unit 3 kW, drilling direction vertical - Vertical finger milling cutter 6.5 kW - 4-axis revolving milling cutter 7.5 kW - Drilling unit 3 kW, drilling direction horizontal Laodpfxjz Da Hte Abysg - Single-blade milling cutter - Marking device at the rear - Inkjet labeling system HP (from the rear) - Label printer at the control panel - Central lubrication - Additional screen at the control panel - Additional screen in the discharge area - Floating dust extraction Pick & Feed 1000 Fully automatic loading system: - For timber lengths up to 13 m - 10 rack positions Special features: - System has been in operation since January 2025 - Extensive special equipment - Immediately ready for use - Ideal for timber construction, prefabricated construction, and joinery businesses Inspection: The machine can be inspected by appointment. We will gladly provide further technical information, photos, or videos. Location: Switzerland, Canton of Bern

Condition: excellent (used), Year of construction: 1972, functionality: fully functional, We are offering this machine for sale. It is connected and can be tested under power. A video of the machine can be sent via WhatsApp. Centre height above bed: 1,250 mm Maximum swing diameter over cross slide: 2,000 mm Maximum swing diameter over bed: 2,500 mm Maximum workpiece weight between centres without supports: 80 t Bed height: 700 mm Bed width: 3,000 mm Laodjv Spvmjpfx Abyog Distance between centres: 7,000 mm Machine weight: approx. 160,000 kg

Year of construction: 1999, condition: excellent (used), working width: 620 mm, machine/vehicle number: SE 01510 A10, Heating Element Welding Machine HP60/40 by BRANSON The drive is hydraulic, supported by positioning and control systems. The machine is equipped with its own vacuum pump. Only a few operating hours (approx. 6,800 hours). Usable heating element area: width 600 mm x depth 400 mm Max. workpiece dimensions: - Max. width: 620 mm - Max. depth: 420 mm - Max. upper height: 350 mm - Max. lower height: 350 mm (Combinations of part heights possible, depending on contour) - Max. processing temperature for contact method: 400°C The modular frame design allows for easy conversion and retrofitting. The side doors and the front door in the welding area can be easily opened (for rapid retooling). The automatic safety lift door ensures a high level of operator safety. The temperature control units on the operator panel have actual/target displays. The control device is a Siemens PLC HMI. The machine is controlled by a Siemens PLC (S7-300 controller). Heating elements are equipped with temperature sensors for temperature regulation and serve as safety cut-offs in case of overheating. The pin systems in the tool mounting surfaces ensure reproducible positioning. Advantages of heating element welding technology: - Reliable welding of workpieces with low or varying wall thicknesses. - Low scrap rate due to dimensionally accurate and repeatable welds. - Precise time, temperature, and force control enable welding of sensitive parts. - Virtually all thermoplastics can be welded with this process. - Different thermoplastic types can be joined (compatibility needs to be verified). Technical data of the machine: - Power supply: 3 x 400 V AC + N + PE - Power: 25 kVA - Rated current: 20 A - Required cable cross-section: 5 cables, each 6 mm² - Required pneumatic connection: 6 bar Machine dimensions: - Machine width: approx. 1.22 m - Machine width with operator panel: approx. 1.8 m Lodpsykvdljfx Abyoag - Machine depth: approx. 2.1 m - Machine depth with operator panel: approx. 2.6 m - Machine height: approx. 2.4 m - Machine height with raised safety door: approx. 2.85 m (open door) Machine weight: approx. 2.2 t

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, operating hours: 83,800 h, Equipment: CE marking, LVD STRIPPIT GLOBAL 30 1225 turret press The machine is in very good technical condition and was used by Alsanit. It has been regularly serviced exclusively by the manufacturer's service department. Only new and original spare parts are used during service. The turret press is currently in continuous production use. If you are interested, we encourage you to schedule a visit to confirm the technical condition and technological capabilities of the machine. General data: Location: Alsanit Sp. z o.o., ul. Wieleńska 2, 64-980 Trzcianka, Poland Province: Wielkopolskie Year of manufacture of the turret press: 2006 Date of purchase and installation of the machine: June 2019 Machine operating hours: 83584 cycles Maximum pressing force: 300 kN (30 tons) Maximum sheet thickness: 6.4 mm Turret system type: Thick Turret Control unit: CNC: GE FANUC 180 IP Maximum travel in the X-axis: 2,576 mm Maximum travel in the Y-axis: 1,337 mm Maximum table load (uniform): 145.6 kg Simultaneous speeds: 110 m/min Number of strokes per minute (punch diameter 25 mm): ±2% 400 min-1 Number of strokes per minute (nibbling function - 2 mm): 1000 min-1 Number of strokes per minute (marking/0.5 mm): 1700 min-1 Maximum slide speed in the X-axis: 83 m/min Laodpfx Abezxzagsyjg Maximum slide speed in the Y-axis: 73 m/min Number of tool stations in the turret: 30 pcs Station A – max. diameter 12.7 mm: 8 pcs Station B – max. diameter 31.7 mm: 16 pcs Station C – max. diameter 50.8 mm: 2 pcs Station D – max. diameter 88.9 mm: 4 pcs Number of indexed (rotary) stations in the turret: 4 pcs (stations D) Note: Each station D can accommodate a multi-tool (1 multi-tool contains 3 to 8 tools), which increases the number of tools from 12 to 32 pcs. Machine height: 2,325 mm Machine length: 5,584 mm Machine width: 5,160 mm Machine weight: 13,750 kg Sheet size: 1250 x 2500 mm Number of sheet clamps (individually programmable): 3 pcs Tilting scrap collector for cut parts: 450 x 500 mm Brush table protecting against scratching the sheets CE certificate Electrical power supply: 380/415 Volt, 35.5 kVA, 63 A, cable cross-section (3+1)x16 mm2 Additional equipment: Scrap conveyor; Brush table MACHINE SPECIFICATION The machine is constructed as a closed bridge frame. The rigid construction ensures stability, reduces noise, vibrations, and oscillations during operation, which in turn has a positive effect on the long service life of both the tools and the machine. The sheet clamps are controlled by a foot switch, and the pin that extends from the table for positioning allows the operator's hands to remain free for proper placement of the sheet on the table. The turret drum of the LVD Strippit Global 30 punch press is made as a cast monoblock, mounted in the machine structure and supported by high-quality and precise bearings. In addition, inside the turret drum, in each tool station, there are hardened and improved sleeves, which can be easily replaced if necessary. The servo drive of the turret ensures precise bidirectional rotation of the turret and the indexing stations (which are locked by a ball head pin after reaching the required angular position, and the accurate linearity and perpendicularity are ensured by tapered, hardened sleeves).

Condition: excellent (used), Year of construction: 1997, Rip and cross saw REMA DMLK 30 Producer of REMA Ljdpfx Absfv Hphjyeag Machine model / type DMLK 30 Year of production 1997 Machine category Longitudinal and transverse saw Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Comments - after the technical review - very good condition - year of production 1997 TECHNICAL PARAMETERS: main engine 3.9 kW trolley length 1370 mm blade diameter 300 mm angle adjustment 0 - 45 " height adjustment cutting height max. 90 mm cutting width on the right side 885 mm ruler length 1350 mm ratchet extended receiving table two kinds of blade rotation speed 3700 and 5000 RPM The protractor visible in the photos is an additional option for PLN 400 net dimensions: length / width / height 135 x 85 x 135 cm weight ~ 320 kg

Condition: used, Year of construction: 2011, operating hours: 7,000 h, functionality: fully functional, machine/vehicle number: 9615, total length: 31,200 mm, total height: 2,300 mm, total width: 4,600 mm, overall weight: 9,000 kg, Equipment: rotational speed infinitely variable, safety light barrier, SC3-200-5 fully automatic cutting system Angle and inclination drive for the sawing station Automatic infeed system Feed cross conveyor (6 strands, wood length up to 14 m) Component support for small cross-sections Control unit for waste disposal Conveyor belt for waste disposal (integrated) 6-arm stacking table (wood length up to 10 m) Combination support for vertically operating tools 2x Vertical drilling unit 2.2 kW 2x Vertical chain mortiser 5.5 kW Additional combination support, vertical, for rotary milling cutter Rotary milling head 7.5 kW Combination support for horizontally operating tools 2x Horizontal drilling unit 2.2 kW Marking device, rear Marking device, bottom Lajdpfx Aozyihujbyog Marking device, front Angled conveyor, right

Condition: used, Year of construction: 2015, functionality: fully functional, We are offering for sale an X-BELT SORTING SYSTEM (FLEXSORT SC3) from the manufacturer DEMATIC. GENERAL DESCRIPTION: - The system offered is a Dematic X-Belt FlexSort SC3 sorter, ideal for logistics centers, sorting hubs, e-commerce, retail, and high-throughput operations. - Pre-owned (2015) X-Belt sorter providing precise, fast, and silent sorting thanks to its motorized trays with electromagnetic drive. The equipment has been dismantled from an active site and is available immediately. MAIN FEATURES: Circular sorter: - Up to 12,000 items/hour - Positive sorting on both sides - Maximum sorter speed: 2 m/s - Sorter designed for rapid maintenance (removal in under 5 minutes) - Powered by linear motors - Total footprint: ~2,700 m² Cross-belt trays: - Cross-belt tray size: 800 mm x 450 mm - Minimum item size: 150 × 150 × 5 mm – 0.25 kg - Maximum item size: 600 × 400 × 400 mm – 35 kg - Item discharge left and right Lodpfx Aex Sw Rqobyeag CHUTES: - 155 chutes + 1 reject lane - Chute equipment: (Saturation indicator light stacks [1/10 chutes], PTL displays, motorized chutes with automatic diverter + idle rollers, multiple fill level sensors, and a saturation sensor) INDUCTIONS: - 4 hybrid induction stations, total capacity 2,400 items/hour each - Automatic item feeding on belts - 36 PTL sort destinations per induction DWS: - Dimensioning - Automatic barcode reading - Dynamic weighing SUPPORTED ITEM TYPES: - Plastic trays - Cartons - Soft parcels (pouches, envelopes, polybags) KEY BENEFITS: - Low energy consumption - Simplified maintenance - WMS / WCS compatibility - Dual-sided sorting (left/right) - >99% sorting accuracy - Quiet operation (

Condition: good (used), Year of construction: 2023, functionality: fully functional, operating hours: 59,000 h, input voltage: 400 V, input frequency: 60 Hz, type of input current: three-phase, workpiece height (max.): 50 mm, edge thickness (max.): 5 mm, actuation type: electric, total height: 2,000 mm, total length: 3,095 mm, total width: 1,330 mm, overall weight: 700 kg, Equipment: documentation/manual, 2023 Good condition For inquiries, please contact: Gergely Repka 06707739050 Professional edge banding machine suitable for edge sealing and post-processing of panel-format sheet materials. It can be used for particleboard, MDF, furniture board, table tops, etc. Key technical data: * Coil edge banding: 0.4–3 mm * Strip edge banding: 0.4–5 mm * Maximum edge height: 55 mm * Processable sheet thickness: 8–50 mm * Edge banding cross-section: max. 5 × 50 mm (material-dependent) * Minimum workpiece width: 70 mm * Minimum workpiece length: 180 / 210 mm * Feed speed: 9 m/min * Manually adjustable pressure beam * Extendable workpiece support with 500 mm distance Equipment: * Edge Control BC15 control system with a 15.6" touchscreen * Vi.se. (Visual Setting) digital setting system for quick and accurate machine adjustment * FG101 pre-milling unit with 2 diamond milling heads * MG101 edge feeding unit * Glu Jet GJ101 hybrid adhesive technology (2.3 kW / 50 Hz) with automatic adhesive height adjustment * 1.4 kg adhesive tank (for 4 cartridges) * Glu Jet cleaning tank * Automatic refilling system * DW101 pressing unit * KA101 pneumatic end trimming unit, 1 motor version * 0.22 kW * 12,000 rpm * FR101 profile smoothing unit * chamfering and radius function * 2 × 0.37 kW * 12,000 rpm * 2 replaceable HW milling heads Ø75, Z4, R2 * FF101 corner rounding unit with dual linear guide * ZK101 scraping unit R=2.0 mm * Chip collection system Lodpfx Abozi Am Neysag * FK101 surface scraper unit * SW101 polishing unit * 2 × 0.13 kW * 1,400 rpm * 2 textile polishing discs, 120 mm * Adjustable from 0–5° * TR101 spraying unit for infeed and outfeed sides

Condition: used, Year of construction: 2015, Base machine T65C Automatic, 1 unit General technical features: • Weight: 1600-2,200 kg, Martin composite stand • Table size: 860 mm x 1370 mm in gray cast iron; table extension is standard, designed as a lockable tool tray, 335 mm x 625 mm • Table height: 900 mm • Scoring table: Standard length 3000 mm, table length corresponds to cutting length; position-independent locking; guides are hardened, wear-resistant, self-cleaning; table lip is replaceable; design in anodized aluminum • Saw blade spindle: Ø 30 mm for main saw blade, two drive pins 8 mm Lsdpfjz Alfuox Abysag • Saw blade change: Quick-change system "ProLock" • Saw blade diameter: Ø 250 - 550 mm; can be recessed under the table up to 400 mm; saw blades up to Ø 400 mm can be used with inserted scoring saw blades • Cutting width: 1,100 mm • Saw blade swivel: 0° to +46° • Cutting height: max. 204 mm / saw blade 550 mm / 0°, max. 135 mm / saw blade 550 mm / +45° • Cutting width (main saw): Saw blades with max. 6 mm cutting width at swivel angle 0° to +46°; special tools with max. 20 mm cutting width at swivel angle 0° • Motor power: 5.5 kW (7.5 hp), 3 ~ / 400 V - 50 Hz • Speeds: 2800 / 4000 / 5000 rpm; easy and convenient speed change from the front via the chip guard • Length stop: Design in anodized aluminum with continuous support, fine adjustment for both fence elements; dimension display via a scale with a magnifying glass; length compensation for angled cuts with electronic assistance; cutting length 95 - 2000 mm, extendable up to 3220 mm • Cross table: Design in zinc-coated steel; angled cuts according to the scale without repositioning the stop; integrated fixing positions for 0°, 22.5°, 30° and 45° cuts, one-hand clamping on the scoring table; support dimensions 1340 x 650 mm • Parallel stop: Electromotive positioning of the parallel stop; stop bar in anodized aluminum, foldable; complete integration of the parallel stop into the control system; guided by four grooved ball bearings, floating above the machine table, removable in any position; movement of the stop in the safety area (0 - 200 mm) in hold mode, display resolution: 0.1 mm; repeat accuracy ± 0.05 mm • Extraction: Connection to protective hood Ø 100 mm, machine stand Ø 120 mm; minimum extraction air volume: 23 m³/min at 800 Pa at the main connection 120 mm • Protective hood: Protective hood with 2 blade sets (1x flat for 0° cuts, 1x with a one-sided belly for cuts 0° to 46°); passage dimension between saw blade axis and support column: approx. 900 mm, clearance when the hood is swiveled away between the saw blade and the protective hood arm: approx. 635 mm; releasing the locking from the working position • Standard accessories: 1 scoring shoe on the scoring table, 1 handle for pushing the wood, 1 ProLock combination wrench, 1 return handle, 4 shims (250/350, 350/450, 450/500, 500/550), 1 push stick • Control panel: Control panel at eye level, can be swiveled away • Electrical equipment (according to VDE/EN 60204): Electronic soft start/stop device for the main saw blade; contact for controlling the extraction; motor protection switch and winding protection, emergency stop button; required voltage supply: 3 ~ / 400 V - 50 Hz • Emission values, workplace emission: Noise values according to DIN EN ISO 11202, dust values according to DIN 33893. Please refer to the operating manual for the technical values. Performance features of the T65 control system: Performance features of the 5.7" (145 mm) touch screen control system with color L

Year of construction: 2020, condition: like new (used), functionality: fully functional, The A.Celli Stream in Line 668 is a complete industrial in-line slitter winder designed for integration into medium- and low-throughput production lines for nonwoven fabrics and composite materials. The machine performs longitudinal web slitting and surface-driven winding of finished rolls. The slitting system uses 12 circular-knife units operating with band counter-knives mounted on a motorized expanding shaft. The configuration includes a motorized S-wrap, a motorized SUS supporting roller, edge-trim extraction, shaft supports, a bar acceleration mechanism and a roll holder. The web is guided through bowed spreader rollers to reduce wrinkles and folds. The machine is equipped with AC drives, a control cabinet, an operator panel, a desktop computer with monitor and industrial communication via Profinet and Ethernet TCP/IP. Manufacturer: A.Celli Nonwovens S.p.A. Machine type: Stream in Line Machine version: 668 Serial number: 2020026 Year of manufacture: 2020 Application: Longitudinal slitting and winding of nonwoven fabrics and composite materials Winding design: Surface driven Production speed: 200 m/min Web threading speed: 10 m/min Cross-cutting system: Circular knife Longitudinal slitting system: Band counter-knives on a motorized expanding shaft Number of slitting units: 12 Edge-trim extraction: Yes Number of shafts: 4 Shaft diameter: 3″ Drive system: AC motors Motorized S-wrap: Yes Laodozudfdspfx Abyog Motorized SUS supporting roller: Yes Shaft supports: Yes Bar acceleration mechanism: Yes Roll holder: Yes Drive side: Left Operator side: Left Control cabinet side: Left Operator panel colour: RAL 7035 Control cabinet colour: RAL 7035 Length: 6200 mm Width: 5550 mm Height: 3045 mm Total weight: 16,000 kg Supply voltage: 400 V Number of phases: 3 Auxiliary AC voltage: 230 V DC control voltage: 24 V Frequency: 50 Hz Power supply earthing system: TN Protection rating of power cabinets: IP55 Electrical reference standard: IEC 60204-1 Cable entry into cabinets: From below PLC communication: Profinet Field communication: Ethernet TCP/IP PLC software: TIA Portal Operator computer: Desktop computer with monitor Compressed-air pressure: 6 bar Air consumption during web threading: 4500 Nl/min Air consumption during normal operation: 700 Nl/min Air consumption during the change cycle: 2000 Nl/min Cable routing: In floor ducts Operating temperature: +15°C to +40°C Storage temperature: +25°C to +55°C Relative humidity: Below 80% Maximum operating altitude: 1000 m Equivalent continuous sound pressure level LEQ: Below 85 dB A-weighted sound power level LWA: Below 83 dB Installed drives: Transmission roller, S-wrap roller, slitting unit, SUS roller, accumulation shaft The machine comes from an industrial nonwoven production facility and is offered as shown in the photos. A detailed PDF with the complete technical specification of the machine is available upon request. We will be happy to provide it to seriously interested customers. Additional photos and further information are also available upon request. Price: on request / negotiable. Please contact us for further information.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Equipment: safety light barrier, Hundegger SC 3 Speed-Cut – model year 2020, for sale due to new acquisition in May 2027. We are selling our fully automatic cutting system, the Hundegger SC3 Speed-Cut, from 2020. Machine equipment: - SC 3 Fully automatic cutting system, base machine with 5-axis sawing unit – mirrored version - Hundegger production program CAMBIUM - Automatic cross-section control, Y-axis - Central lubrication - Combination support for vertically operating tools - Vertical finger milling cutter, 5.5 kW - 4-axis revolving milling head, 7.5 kW - Combination support for horizontally operating tools - Drilling unit 2.2 kW, drilling direction horizontal - Marking device, bottom - Marking device on horizontal support - Inkjet labeling system Inkjet 4, from the rear - Automatic discharge of small components to the front - Wood storage blocks with rollers after discharge - Control unit for disposal with operating buttons Upgraded in May 2023 for €8,500: SC 2100 drilling unit 2.2 kW, drilling direction vertical, on the combination support for drilling up to 24 mm 4-sided inkjet labeling system Inkjet 4 CONVEYOR SYSTEM ALSO INCLUDED IN THE PRICE!!! BEBL conveyor system, transverse and vertical General: Ljdpfxjz Dga Tj Abyjag Year of manufacture: 2020 Operating hours: low, approx. 3900 hours (machine from ongoing operation) Regularly maintained by Hundegger Condition: very good, like new Contact: Holzbau Gutmann GmbH, Reulbacherstraße 18, 36115 Hilders

Condition: new, Year of construction: 2025, functionality: fully functional, power: 7 kW (9.52 HP), input voltage: 400 V, type of input current: three-phase, cutting height (max.): 120 mm, saw blade diameter: 400 mm, tilt adjustment saw blade: 45 °, height adjustment type: electric, actuation type: electric, Equipment: CE marking, saw blade guard, scorer, Efficient and precise cutting with high ease of operation thanks to the electromotive adjustment of the main saw blade (height/angle) and the parallel fence. Powerful motor, speed up to 5,000 rpm, scoring saw speed up to 8,000 rpm. Double roller carriage, the heart of the panel saw, smooth-running and durable. Cutting length max. 3,200 mm Ledpfx Abez Dwftoyoag Safe operation thanks to proven safety devices. Equipment: Machine frame: Torsionally rigid and self-supporting guarantees the necessary smooth running and stability Control: PLC control Electromotive height adjustment and tilt 0-45° for the main and scoring saw blade via push and hold button. Saw unit: Powerful motors for excellent cutting performance Drive power/speed of the main saw spindle with automatic brake Main saw motor 7 kW, speed adjustment by switching over the drive belt, speeds 5,000 / 4,000 / 3,000 rpm Speed of the scoring saw 8,000 rpm Quick-change system for the main saw blade Saw blade angle is displayed numerically Double roller carriage: Linear, round guide rails ensure a precise and durable system with high-quality cutting results and a long service life Small rollers inside the carriage guarantee smooth sliding during cutting incl. upper carriage locking Carriage length 3,200 mm Parallel fence: max. width 1,250 mm with electromotive adjustment removable fence High-quality work table made of robust sheet steel guarantees high rigidity Safety zone starts approx. 200 mm in front of the saw blade Crosscut fence: Cross position of the panel is displayed numerically with telescopic device for cuts up to 3,100 mm and 90° guarantee Robust, gap-free flap units are easy to move Fence ruler is removable Cutting to length on the crosscut fence on the sliding carriage 3 digital displays with fine adjustment for high repeatability Display up to max. 3,200 mm Extraction: to prevent flying chips and dust protects the operator from hazards Table extension and table widening Design: Clamping shoe, sliding stick, sliding and return handle Miter stop for manual mounting on the sliding carriage Technical data: Main saw: Saw blade diameter 400 mm, speed 3,000/4,000/5,000 rpm, motor 7 kW S1 Scoring saw: Saw blade diameter 120 mm, speed 8,000 rpm, motor 0.75 kW S1 Saw blade tilt 0-45° Max. cutting depth at 45°: 85 mm Max. cutting depth at 90°: 125 mm Parallel fence: max. 1,250 mm Sliding carriage: 3,200 x 418 mm Max. cutting capacity: 3,200 mm Height adjustment: electromotive Angle adjustment: electromotive Table size: 1,020 (690+720) mm Extraction: Diameter 100 mm Space requirement: 6,700 x 3,900 x 1,890 mm CE marking in accordance with EU directives including documentation and maintenance instructions Saw blades are not included in the scope of delivery.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, input voltage: 400 V, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,300 mm, workpiece height (max.): 80 mm, We offer this very good Morbidelli Uniflex HP Throughfeed Borer and Router CNC, year of construction 2016. Manufacturer: Morbidelli Model: Uniflex HP Year of manufacture: 2016 Condition: very good Category ID: 2074 Type ID: 151 Machine type: Throughfeed Borer and Router CNC The Morbidelli UNIFLEX HP is a high-performance CNC drilling and routing centre designed for precision panel processing in furniture and cabinet manufacturing. It allows drilling on multiple faces of a panel and routing operations with high accuracy while minimizing setup time through automated clamping and CNC control. Key Features • 6-side panel drilling capability with upper and lower machining heads • Up to 134 independent spindles for high production throughput • RO.AX rotoaxial spindle technology ensuring zero backlash and extremely accurate drilling • Dual independent clamps eliminate machine setup time and allow simultaneous operations • Ability to process two overlapped panels simultaneously • Integrated saw blade in X-axis for panel cutting operations • Heavy-duty welded O-frame structure for maximum rigidity and precision • CNC controlled panel movement with brushless motors and ball screws • Xylog Plus 2 CNC software with PC interface Drilling System • 96 vertical drilling spindles (48 upper + 48 lower) • Horizontal drilling spindles: o 8 + 8 in X direction o 4 + 2 in Y direction • Maximum spindle speed: 6,000 rpm • Integrated X-axis saw blade: o Diameter: 125 mm o Speed: 7,500 rpm CNC Control & Software • Industrial PC with Windows operating system • 17" colour display and keyboard interface • Xylog Plus 2 programming software • Programming options: Parametric programming • DXF and ASCII file import support • Simulation and optimisation of drilling cycles Panel Capacity • Panel length: 250 – 3000 mm • Panel width: 70 – 1300 mm • Panel thickness: 10 – 80 mm • Maximum panel weight: 100 kg Axis Speeds • X axis: 120 m/min • Y axis: 35 m/min • Z axis: 30 m/min Machine Requirements • Compressed air: 6.5 bar • Average air consumption: 500 Nl/min • Dust extraction airflow: o Upper head: 5000 m³/h o Lower head: 2250 m³/h Additional Equipment Included • Panel length measuring device • Electrical cabinet with air conditioning Laodpfxjyr Uguj Abyeg • Manual loading and unloading stations with cross belts If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, total width: 1,420 mm, total length: 1,830 mm, total height: 2,500 mm, empty load weight: 900 kg, Offered here is a used WK04 scale from KMK. Possible weighing range: 400g - 25kg Suitable for potatoes, onions, and beetroot Year of manufacture: 2019 Videos can be sent via WhatsApp upon request. Manufacturer details: WK04 Scale (Partial Portion Weigher) - Machine built from sandblasted and double powder-coated steel - Combination weigher with 4 weighing hoppers - 11-liter capacity per weighing hopper - For package sizes from 400g to 2500g, target weight is achieved in a single discharge - For 2.5kg to 15kg, target weight is achieved in two discharges - From 15kg upwards, target weight is achieved in three or four discharges - Package sizes from 0.4kg to 30kg - Independent feeding with vibratory plates - Vibration intensity of the feed adjustable via potentiometer in the control cabinet - Integrated cross conveyor with extra soft, curved carriers - Cross conveyor runs only after release by the packaging machine or, during manual packing, upon footswitch signal - For optimal product handling and adjustment to package size, the cross conveyor speed can be set using a frequency converter - Service platform with ladder - Product-contacting parts made of stainless steel - Optimal weighing achieved by easily adjusting multiple parameters relevant for filling the weighing hoppers (filling time, refill, tolerance, etc.) - Creation of up to 40 programs for different products, weights, tolerances, and outputs Lsdpex R Umtjfx Abysag - Simple program management and operation via touchscreen monitor - Mitsubishi PLC - Fill level sensor for controlling the feed conveyor - 5 heavy-duty height-adjustable support feet - Can be interfaced with common packaging machines

Year of construction: 1968, condition: ready for operation (used), A vertical large-format vertical turning lathe TOS is available. Turning diameter cross rail support/side support: 1150mm/1000mm, max. workpiece weight: 3000kg, max. workpiece height: 900mm, travel X/Y/Z: 500mm/500mm/750mm, table diameter: 1000mm, max. table torque: approx. 8800Nm, machine dimensions X/Y/Z: approx. 2600mm/2700mm/4000mm, weight: approx. 13000kg. Documentation available. An on-site inspection is possible. Expected to be available from Q3 2026. Lodpfx Abeyifltoyeag

Condition: used, Year of construction: 1998, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 430 mm, total height: 2,150 mm, total length: 1,900 mm, total width: 1,400 mm, rotational speed (max.): 2,500 rpm, rotational speed (min.): 50 rpm, type of input current: three-phase, table length: 400 mm, table width: 800 mm, MEXPOL D40A1 Universal Tool Milling Machine with HEIDENHAIN Digital Readout and Counter Support For sale is a robust MEXPOL D40A1 universal tool milling machine, manufactured in 1998. This machine is ideally suited for toolmaking, general mechanical engineering, single-part and small-series production, as well as repair and training workshops. The milling machine is equipped with a HEIDENHAIN ND 780 digital readout, which enables precise and convenient operation. The sturdy cross table with T-slots offers versatile clamping options. In addition, the machine features a coolant system and a counter support for supporting milling arbors during horizontal milling operations. The swiveling milling head expands the range of applications and enables flexible machining of various workpieces. The machine is in a well-maintained, used condition and was in operation until recently. Technical data: Manufacturer: MEXPOL Type: D40A1 Year of manufacture: 1998 Factory number: 50443 Machine type: Universal/Tool Milling Machine Spindle mount: SK 40 Speed range: 50 - 315 + 400 - 2500 rpm (9 steps) Feed rate range: 10 - 63 + 80 - 500 mm/min (9 steps) Travel (X / Y / Z): 600 × 400 × 430 mm Table dimensions: 800 x 400 mm T-slots: 7 pcs, 14 mm wide 3-axis digital readout: HEIDENHAIN ND 780 Coolant system Counter support Swiveling milling head Equipment: HEIDENHAIN ND 780 3-axis digital readout, swiveling Swiveling control panel Coolant system Hydraulic tool clamping Drilling quill Counter support for milling arbor operation Work light Handwheels for all axes Fold-up, all-around chip guard with gas springs Total weight: approx. 1,500 kg Machine dimensions: approx. 1900 × 1400 × 2150 mm (L x W x H) Subject to prior sale and errors. Ljdpfszfxubex Abyjag