Used Cutting And Processing Center for sale (47,287)

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: 19500624, functionality: fully functional, operating pressure: 7 bar, rotational speed (max.): 18,000 rpm, working height: 1,000 mm, No minimum price – guaranteed sale to the highest bidder! The new price of the machine was €950,000! TECHNICAL DETAILS Milling units / Motor power Motor power, small milling cutter: 0.27 kW Frequency, small milling cutter: 300 Hz Speed, small milling cutter: 18,000 rpm Motor power, large milling cutter: 1.1 kW Frequency, large milling cutter: 200 Hz Speed, large milling cutter: 12,000 rpm Tool data / Milling cutter data Collet diameter, small milling cutter: max. 8 mm Milling cutter diameter, small milling cutter: max. 8 mm Collet diameter, large milling cutter: max. 10 mm Milling cutter diameter, large milling cutter: max. 14 mm Electrical data Operating voltage: AC 400 V 3 N/PE Frequency: 50 Hz Rated current: 35 A Control voltage: 24 V Pneumatic data Working pressure: 0.7 / 1 MPa (7 / 10 bar) Compressed air consumption: 170 l/min Load limit of pneumatic lines at 70 °C: approx. 15 bar Working height Working height: 1,000 mm EQUIPMENT Nodpfjzlnxiox Aiqjld Clamping units Vertical clamping Maintenance unit with filter pressure regulator Control cabinet / Saw with lockable main switch Cutting unit: Allows cutting angles of 45 degrees and 90 degrees Machining units: Includes machining units and profile bearings Tools: Two screwdrivers, three cut-off wheels

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, power: 14 kW (19.03 HP), input current: 80 A, workpiece length (max.): 4,000 mm, machine/vehicle number: 6080008129, TECHNICAL DETAILS Maximum profile width: 130 mm Maximum profile height: 205 mm Maximum workpiece/profile length: 4,000 mm Processing capacity: 80 units MACHINE DETAILS Connection: 3 N/PE 400 V Frequency: 50 Hz Current: 80 A Power: 14 kW EQUIPMENT Powered, continuously adjustable gripper Lifting function for smooth feeding Profile guidance on rollers Internal gripper to prevent damage to the profiles Integrated measuring sensors for workpiece length control Workpiece removal via outfeed table Portal design for high profile cross-sections Industrial PC with Windows operating system Nljdpfszlnvuex Aiqed Barcode scanner

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 4550 S PROFILE CUTTING AN PROCESSING CENTER ( 9 AXIS ), • Ability to perform operations on aluminum and PVC profiles, such as channel cutting, drilling, marking, cutting at different angles, etc. • 10 high-speed, air-cooled spindle motors specifically designed for aluminum. • Average axis speeds exceeding 120 m/min. • Precision 3-axis profile clamping station. • Profile feeding capacity of 7 pieces. • Profile processing length: maximum 6500 millimeters / minimum 600 millimeters. • Automatic profile length detection feature. Nljdpfxszd Rnde Aiqjd • Windows-based, user-friendly interface with easy adjustment options. • Data transfer via USB, online remote monitoring system. • Remote connection support. • 23.8" touchscreen, high-performance display. • Servo-controlled cutting unit that allows for precise cutting between 30 and 150 degrees, with an accuracy of ±0.1 degrees. • Automatic transfer of cut profile waste to a collection cart via a conveyor system. STANDARD EQUIPMENT • Ø550 millimeter saw blade. • Automatic scrap chip conveyor discharge unit. • Barcode printer. OPTIONAL EQUIPMENT • Compatibility with CAM programs. • Optional length. • Belt-type output conveyor. • Safety barrier (sensor).

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 4550 PROFILE CUTTING AN PROCESSING CENTER ( 9 AXIS & 10 STATION ), - In aluminum and PVC profiles; Grooving, hole drilling, marking, cutting at different angles, etc. Ability to perform operations - 10 special air-cooled spindle motors for high-speed aluminum - Axis speeds averaging 120 m/d - Precise 3-axis profile holding station - Profile feeding capacity 7 pieces - Profile machining length maximum 6500 millimeters / minimum 600 millimeters - Automatic profile length detection - Windows-based, easily adjustable user-friendly interface - Data transfer via USB, Online remote monitoring system - Remote connection support - 23.8" Touch high-performance touchscreen - 30 - 150 degrees between, +- 0.1 degrees servo-controlled cutting unit that allows precise cutting - Transporting the cut waste profiles to the collection cart with automatic conveyor system STANDARD EQUIPMENT - Ø550 Millimeter saw - Automatic waste chip conveyor discharge unit - Barcode printer OPTIONAL EQUIPMENT - Compatibility with CAM programs - Optional length Njdpfxsrcm Ruo Aiqsld - Output conveyor with belt system - Safety barrier (Sensor)

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: KF0310KMB20260601, type of input current: three-phase, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 4 mm, space requirement length: 6,200 mm, space requirement height: 2,650 mm, space requirement width: 2,500 mm, controller manufacturer: Self-developed brand, workpiece length (max.): 2,500 mm, workpiece height (max.): 160 mm, nominal power (apparent): 45 kVA, number of spindles: 14, Key Product Features & Technical Parameters of KMB2500 Bending Center(Panel Bender)1. Core Product Features Bending Capacity - Fast bending: 0.2s per stroke, one-step forming - Universal dies for arc, hemming & multi-angle bending, cut mold & labor cost - Processes carbon steel, stainless steel, aluminum, film-covered sheets Nedpjxu Uhvofx Aiqold - Switchable edge/corner positioning for consistent precision; 3 processing modes (High Precision/Standard/Ultra-Fast) Mechanical Structure - Stress-relieved welded steel frame, higher rigidity & anti-resonance than cast frames - Press-arm feeding unit: 120m/min max feed speed, 1.9G acceleration - Hardened heavy-duty bending knives for long service life - Brush & ball worktable, auto lubrication, visual unbalanced load warning Intelligent Control - EtherCAT full closed-loop bus system, up to 64 axes, 2ms refresh, ±0.01mm accuracy - Auto angle/rotation compensation, die collision avoidance, offline simulation - IoT & cloud access, remote diagnosis & upgrade; reserved robot/production line interfaces - Simple graphic programming, low operator skill threshold Operation Merits - Full servo drive, low power consumption, low maintenance, ~55dB low noise 2. Technical Parameters -ower: 380V, average 7kW; Overall size: 6200×4500×2650mm - Max bending size: 2500×1250mm; Min thickness 0.3mm - Max thickness: 3mm steel/stainless steel, 4mm aluminum - Bend angle: -90°~90°(≤2.5mm steel), 0°~180°(≤2mm steel) - Max bend height 170mm, min arc radius 2mm - Min forming inner size customizable; Reducer backlash: 3 arcmin

Condition: excellent (used), Year of construction: 2010, operating hours: 18,502 h, functionality: fully functional, machine/vehicle number: 3201379, type of input current: AC, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, overall weight: 40,000 kg, total length: 2,550 mm, total height: 1,090 mm, total width: 1,500 mm, Our Salvagnini P4X-2516 Panel Bender is a fully automatic, high-performance panel bending system designed to streamline sheet metal production with maximum efficiency and precision. It integrates automated loading, feeding, bending, and unloading into a single continuous process, minimizing manual handling and ensuring consistent output quality. The machine features adaptive bending technology with real-time sheet thickness measurement, allowing automatic adjustment of bending parameters for optimal accuracy. Equipped with an advanced SiX control system and intelligent software, it enables flexible production scheduling and program management. The inclusion of an automatic blankholder (ABA) and auxiliary bending tools (CLA) allows complex and multi-stage bending operations without manual setup, while the rotating manipulator enables multi-side bending in a single cycle. Max. sheet length: 3,048 mm Nledpfx Aoyr Ackoiqed Max. sheet width: 1,524 mm Max. bending length: 2,500 mm Sheet thickness (steel ~410 MPa): 2.5 mm (90°) Sheet thickness (stainless steel ~580 MPa): 2.1 mm (90°) Sheet thickness (aluminium ~265 MPa): 3.2 mm (90°) Max. bending angle: +135° / -135° Max. flange height: 165 mm Max. diagonal (rotatable sheet): 2,800 mm Min. sheet thickness: 0.5 mm Max. pack height (incl. pallet): 350 mm Max. load capacity: 5,000 kg Vertical stroke (loading table): 550 mm Rotation capability: 0°, 90°, 180°, 270° Automatic loading system with scissor lift table () Conveyor–destacker (PCD3015) for automatic feeding Automatic panel bending center P4X-2516 Upper bending blade (LS1) Lower bending blade (LI) SiX CNC control system SOLE.P4 production management software OFFICE.P4 offline programming software ABA automatic blankholder (automatic length adjustment) CLA-A asymmetric auxiliary bending system UC1000-G13 gooseneck tool set Eroded clamp (for coated / special materials) PSE automatic cleaning & lubrication system SAP panel unloader / accumulator Spare parts kit (approx. €7,000 value)

Condition: new, Year of construction: 2026, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, Your description for this machine will be as follows: "We offer a brand new 2026 model Ayba longitudinal and cross-cutting machine." If you have any questions or require further information, you can send us a message or call us. Nljdpfxjy Hi Nne Aiqsd

Condition: used, Year of construction: 2020, functionality: fully functional, For sale: ELUMATEC SBZ 610 cutting center, manufactured in 2020. The machine is in perfect working order and ready for operation. Nlsdpezpwzbsfx Aiqed

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, For sale: ROTOX ZSA 263 automatic profile cutting machine, year of manufacture 2012. The machine is in working condition, regularly used, and available for inspection and testing by prior appointment. Main features: - CNC control system - Cutting angles: 45°, 90°, and 135° - Pneumatic profile clamping Nledoy Sk Amopfx Aiqod - Automatic profile feeding - Right and left side material transport - Suitable for automatic cutting of PVC profiles The ROTOX ZSA 263 is a reliable and high-performance industrial machine, ideal for companies involved in window and door manufacturing. For more information or to arrange a viewing, please feel free to contact us.

Condition: used, Year of construction: 2014, Used machine Year of manufacture: 2014 Equipment and technical data: - Working range X: 3,740 mm - Working range Y: 1,570 mm - Working range Z: 350 mm - 4th axis: present - 5th axis: 5-axis spindle, motor 12 kW - with additional locking of the C axis - Tool changer positions: 24 with disc changer; 10 in the machine column on the left Nodpfxjzlbp Ue Aiqjld - Vertical drilling spindles: 12 - Machine table: console table - Automatic table positioning: present - 6 workpiece supports type e-motion - Special workpiece clamping system for frames - Software: FORMAT 4 WOOD FLASH, TPA ALBATROS - 2 machining fields for pendulum operation - with automatic central lubrication - with mobile control desk with PC monitor - with air conditioning for control cabinet - with vacuum pump 90 m³/h - with hand-held control unit - Included: 12 frame clamps, 8 large and 4 medium suction cups Availability: at short notice Location: Röllbach

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: - Electrics 3x400V 50 / 60Hz - Gimbal-mounted 5-axis electrospindle 12 kW (S6) HSK F63 - 24,000 rpm - ceramic bearings incl. liquid cooling with infinitely height-adjustable extraction hood - electric-motor controlled - full rated power at approx. 12,000 rpm - speed: 1000 - 24000 rpm - drive: 3-phase HF motor, inverter-controlled - direction of rotation: clockwise/counter-clockwise - 2 controlled compressed-air connections - interface for aggregates - tool weight (rotating): 6 kg - max. saw blade Ø 350 - spindle cooling: liquid cooling - extraction hood infinitely variable - Profit H350 16.30: CNC machining centre in gantry design (without tool) with digital drives (driven on both sides). The machine column of the Profit H350 16.30 is made of thick-walled, electrically welded rectangular tubes. The steel ribbing inside the column achieves high stability. - Machining field H350 16.30: Travel of the axes: X = 4000 mm Y = 1970 mm Z = 455 mm Working field: X = 3000 mm Y = 1500 mm Z = 150 mm clearance height Axis positioning speeds: depend on the selected safety system (these can be found in the layout). - Travelling gantry driven on both sides - Guide system X axis: The travelling gantry of the X axis is driven via a rack with inclined, crowned tooth form - This guarantees highest precision. The reduction gear ensures highest machining quality and repeat accuracy. The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. - Guide system Y axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Y axis is positioned by means of a ground recirculating ball screw. - Guide system Z axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Z axis is positioned by means of a ground recirculating ball screw. - Automatic central lubrication: The grease is delivered in a controlled manner to the guide carriages of the X, Y and Z axes as well as to the recirculating ball screws in Y and Z. The lubrication process is carried out automatically after a specified time. - 12-position linear tool changer on the left of the machine column incl. a pick-up position for aggregates: The 12-position linear changer ensures shortest changeover times and offers sufficient space for milling tools. One aggregate change position (fitting variants see layout) Nodpfx Aezlbpboiqsld Max. tool diameter 250 mm Max. tool length 240 mm - Drilling head DH 18 6H 1S: Vertical 12 spindles: 7 spindles in the X direction and 5 spindles in the Y direction. Horizontal 6 spindles: 4 spindles in the X direction and 2 spindles in the Y direction. Forward stroke = 70 mm max. drill length = 70 mm and shank D = 10 mm. All spindles are individually driven and selectable. 1 grooving saw – in the X direction max. saw blade diameter 120 mm max. blade thickness 5 mm max. speed infinitely variable up to 7500 rpm. The drilling group covers the entire working field both horizontally and vertically. - Controlled central extraction connection: Via the program control, either the drilling head or the milling spindle is extracted. This controlled slide gate achieves an optimised extraction performance. Connection diameter see layout - 6 workpiece supports: With front and rear...

Condition: used, Year of construction: 2019, Used machine Year of manufacture 2019 Equipment and technical data: - For classic nesting machining with a spoilboard - Machine frame of welded construction with ground and hardened prismatic guides for the moving column, aggregate head and consoles - Moving column in gantry design - Rack-and-pinion drive, helically toothed, in the X and Y directions, ball screws in the Z direction for precise positioning - Machining dimensions: - Max. support surface on nesting table: X = 3100 mm Y = 1560 mm - Max. travel: X = 4695 mm Y = 2100 mm Z = 293 mm - Max. clearance height DYNESTIC table Z = 100 mm from top of table (without spoilboard) - Maximum programmable speed vector speed: 128 m/min X = 80 m/min Y = 100 m/min Z = 25 m/min - DYNESTIC table: - Fixed, continuous machining table with grid layout - continuous grooves in the X and Y directions - groove spacing 50 mm - with 25 metres of sealing cord for clamping the spoilboard - Vacuum zones: single-circuit vacuum system - Drilling unit 7877: - 19 spindles - drive power: 1.7 kW - 13 vertical spindles: - individually selectable - U-shaped arrangement - 5+4 in the X and 4 in the Y direction - 32 mm grid - max. drill diameter: 35 mm - total drill length: 70 mm from screw-on end (depending on panel thickness) - spindle extension stroke: 70 mm - direction of rotation: clockwise / counter-clockwise alternating - n(max): 1000 - 4400 rpm infinitely variable - fitting: M 10 thread - fit 11 mm - without tool, without holder - 6 horizontal spindles: - 2 double drilling spindles in the X direction - 1 double drilling spindle in the Y direction - fitting: M 10 thread, fit 11 mm - total drill length max. 63 mm from screw-on end - without tool, without holder - Milling unit 7842: - power: 12.0 kW (S6) - n(max) = 1000 - 24000 rpm infinitely variable - max. power at 12000 rpm to 24000 rpm - air-cooled - with HSK-F 63 tool holder - with right-hand thread nut (for right-rotating tools) - with collet chuck with HSK shank - ceramic ball bearings (hybrid bearings) - tool weight max. 6 kg (incl. holder) - tools: milling and grinding tools max. Ø 160 mm - Safety guarding in accordance with CE standard - Protective fence at the sides and rear - Vacuum pump: 500 m³/h, dry-running - Personal safety via light barriers in the front area of the machine - Hand-held control unit for remote control of the machine with the following operating functions: - start / stop of the machining program - speed control of the machining cycles - reset button - manual feed / rapid traverse for all axes - EMERGENCY STOP - CAMPUS V7 CAD/CAM software 1x machine licence consisting of: - CAMPUS NC-HOPS: - graphical variant system with WOP and CAD/CAM properties for creating part variants using macro technology Nedpfx Aiezlbrpeqold - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic central lubrication - Automatic lubrication at defined lubrication intervals - Additional sealing against dust through overpressure in every guide carriage - Simultaneous lubrication: - for all linear guides in the X, Y and Z directions - for all ball screws in the Y and Z directions - for all milling spindle guides - for tool changer guides (except pick-up tool changer) - All console guides are not lubricat...

Condition: used, Year of construction: 2005, Second-hand machine Year of manufacture: 2005 Features and technical specifications: - Base machine 555 - Machining dimensions for contour milling: - X = 3514 mm - Y = 1544 mm - Maximum machining dimensions: - X = 3868 mm - Y = 1746 mm - Z = 325 mm - Workpiece support with 8 brackets, pneumatically clamped - Drilling unit 7968: - 18 vertical drilling spindles with 32 mm pitch Nedpfxszk N Hle Aiqold - 12 in the X-axis and 6 in the Y-axis - available individually - T-shaped layout - max. drilling diameter 35 mm (depending on panel thickness) - Spindle extension stroke: 70 mm - Direction of rotation: alternating clockwise and anti-clockwise - n = 4725 rpm, infinitely variable - 2 horizontal drilling units in the X-direction, 1 horizontal drilling unit in the Y-direction - Sawing unit 7946: - Motor: 3.5 kW - 90° pneumatically swivelling - n = 5300 rpm - Tool holder A Ø = 200 mm, I Ø = 30 mm, B = max. 3.5 mm - Sawing/grooving in the X and Y directions - Milling unit 7935: - with 6 kW spindle, water-cooled - Milling unit 7982: - for lock case milling - Tool changer 7996: - 18-position magazine (turret) - Vacuum pump with a capacity of 140 m³/h - Handheld control unit - PC control system with TwinCAM WOP system - Siemens control system Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 2005, Second-hand machine Year of manufacture: 2005 Features and technical specifications: - Cantilever machine (6 units) - Travel dimensions: X = 3,490 mm Y = 1,690 mm Z = 205 mm - Machining dimensions: X = 3050 mm Y = (Max. milling depth – tool radius) 1,345 mm Nledpfxezk Nz As Aiqjd Z = 150 mm - TF 20 drilling head - Power 2.2 kW - 8 vertical spindles, spindle spacing 32 mm in the X direction - 6 vertical spindles, spindle spacing 32 mm in the Y-axis - 2+2 horizontal spindles in the X-axis - 1+1 horizontal spindles in Y-axis - with integrated 120 mm grooving saw blade - with 9.2 kW electric milling spindle with ISO 30 mount - with C-axis - with angle unit - with 12-position tool changer - with tool change station for angle units - with vacuum pump 80–100 m³/h - Total connected load 16 kW - Compressed air 6 bar - Compressed air consumption 210 NL/m - Extraction connection 250 mm - Extraction volume 5,300 m³/h - Extraction velocity 30 m/sec - Dimensions: 5940 x 3800 x 2510 mm - Weight: 3,700 kg Availability: at short notice Location: 63934 Röllbach

Condition: used, Year of construction: 2007, Second-hand machine Year of manufacture: 2007 Features and technical specifications: Nesting system with grid table Machining dimensions: - X: 5000 mm - Y: 1240 mm - Z: 135 mm Travel ranges: - X: 5665 mm - Y: 1650 mm - Z: 325 mm with milling unit 7933: - Motor 11 kW (S6) - HSK 63 - water-cooled with C-axis with 18-position disc-type tool changer with 250 m³ vacuum pump with manual control unit Nedpfxozk Nvge Aiqold with central lubrication with minimum quantity lubrication system Availability: at short notice Location: Röllbach

Condition: used, Year of construction: 2005, Second-hand machine Year of manufacture: 2005 Features and technical specifications: Travel ranges: - X-axis: 2,685 mm – Y-axis: 1,095 mm – Z-axis: 140 mm Milling unit: - 6 kW, water-cooled - Tool holder HSK 63 F – Speed 1,000 – 18,000 rpm Tool changer: 6-position, side-mounted Drilling head: - 9 vertical drilling spindles in 32 mm increments - Horizontal drilling spindle: 1+1 - Vertical drilling spindle: 1+1 Groove saw in the X-direction Control system: Twin CAM 32 Nedpfx Ajzk Nu Nsiqsld Vacuum pump 100 m³/h Including vacuum suction cups Dimensions: 5,200 x 2,843 x 1,855 mm Weight: approx. 3,500 kg Availability: by arrangement Storage location: Röllbach

Condition: used, Year of construction: 2004, Second-hand machine Year of manufacture: 2004 Condition: Tested and in working order Features and technical specifications: Travel ranges: - X-axis: 2,685 mm – Y-axis: 1,095 mm – Z-axis: 140 mm Milling unit: - 6 kW, water-cooled - Tool holder HSK 63 F – Speed 1,000 – 18,000 rpm - Tool changer: 6-position, side-mounted Drilling head: - 9 vertical drilling spindles in 32 mm increments - Horizontal drilling spindle: 1+1 - Vertical drilling spindle: 1+1 Groove saw: in the X-direction Control system: Twin CAm 32 Vacuum pump: 100 m³/h Including vacuum suction cups Nsdpszk Nmfofx Aiqjld Dimensions 5,200 x 2,843 x 1,855 mm Weight: approx. 3,500 kg Availability: by arrangement Storage location: Röllbach

Condition: used, MEP Syntax Line 25 Automatic Rebar Processing Center, Used Machine Manufacturer MEP S.p.A. (Made in Italy) Model Syntax Line 25 Machine Functions Automatic straightening from coil Hydraulic cutting Nlodpjzg Uv Defx Aiqjd CNC-controlled bi-directional bending Processing Capacity (Rebar from Coil) Single-wire operation: Ø8 mm to Ø25 mm Double-wire operation: Simultaneous processing of 2 bars from Ø8 mm to Ø16 mm Material Storage Storage capacity: Up to 14 m³ Manual loading Collection tray: 12 × 2.5 m Overall Dimensions Width: 17,400 mm Depth: 2,400 mm Height: 1,600 mm Condition The built-in monitor is not operational. The machine is equipped with a video output, allowing an external monitor to be connected for operation.

Condition: used, Year of construction: 2019, Second-hand machine Year of manufacture: 2019 Only 110 operating hours! Features and technical specifications: Machining paths: - X = 1800 mm - Y = 900 mm - Z = 80 mm Made from 18 mm Koskisen boards Milling bed made from 19 mm MDF as a sacrificial plate with guide rails and slot blocks, used as a clamping method. Base frame with bracing, cast in polymer concrete, prepared for transport by pallet truck or forklift. Mechanical kit comprising profile guides including guide carriages, as well as ball screws 2010 and 1605 for all axes. Shaft couplings and high-performance grease for lubricating the individual carriages, as well as energy chains including connection sets. Control kit comprising a Triple Beast for controlling 3 axes, with an Ethernet connection. Nedpfx Aezk Npgsiqsld Leadshine driver board for the fourth motor. Four stepper motors, 5.0 A, 3 Nm, with motor cables, plus a switching power supply rated at 48 V, 6.7 A, LED board for breakout board, ribbon cable and proximity sensors, small parts such as wires, wire end ferrules, control cable, heat-shrink tubing and cable lugs. Fully installed in an aluminium housing, including electrical kit and emergency stop. - 21.5-inch monitor as a built-in display, including a mini PC with Windows 7, Rhino 5.0 CAD software, Estlcam G-code generator, Beamicon2 control software, as well as a mouse and keyboard, pre-installed in an ergonomic console. Tool length sensor for determining the length and adjusting the active zero-point offset. Optional extras: - High-frequency spindle with 2.2 kW, including union nut, frequency converter, mains filter, braking resistor and collet set. - PC with 8 GB RAM and AMD processor - Rhino 5.0 CAD software for creating both simple 2D data and 3D solid models Availability: at short notice Storage location: Flörsheim

Condition: used, Year of construction: 2018, Second-hand angle unit For woodworking CNC machining centres Year of manufacture: 2018 HSK 63 F shank with torque support with 2 horizontal tool spindles Suitable for mounting a CLAMEX grooving tool as well as a saw blade Technical specifications: Max. drive speed: 8,000 rpm Max. output speed: 12,000 rpm Permissible operating temperature: 85° Unit can be swivelled 360° around the drive shaft Sound level: 80 dB(A) Weight: 3.257 kg Njdpfezk Nluex Aiqsld Availability: at short notice Storage location: Hochheim

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, BAZ and extrusion die system for manufacturing car sill components, consisting of: *Machining equipment: - Anger machine SP2-X2000 (machine number AA100264-11) - Anger machine SP2-X2000 (machine number AA100264-12) - 2 coolant treatment units *Assembly of subassemblies (robot cell for sills): - Robot 1 KUKA KR120 R3200 PA Nledszi Efujpfx Aiqed - Gripper for Robot 1 - Marking station - Robot 2 KUKA KR120 R3500 - Gripper for Robot 2 - Interface between robot and machining center - Cleaning unit for components - Assembly machine with 2 lines - Robots 3 and 4 for handling - Drawer system with component inserts - Screwing station - Adhesive application station - Platform - Robot 5 - Gripper for Robot 5 - Pallet station - Safety enclosure - Electrical control and integration Further information available upon request.

Year of construction: 2021, condition: good (used), functionality: fully functional, travel distance X-axis: 4,176 mm, travel distance Y-axis: 1,040 mm, travel distance Z-axis: 540 mm, controller manufacturer: ELUMATEC, controller model: SBZ 122-ELUCAM, power: 17.5 kW (23.79 HP), input voltage: 400 V, input current: 24 A, feed rate X-axis: 120 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 30 m/min, positioning accuracy: 0.1 mm, spindle speed (max.): 20,000 rpm, tool length: 150 mm, number of slots in tool magazine: 12, ELUMATEC 122/73 CNC bar machining center - Frequency: 50/60 Hz - Max. machining length without end-face machining: 4050 mm - Machining direction (front and back) - Disc cutter diameter: 120 mm - Clamping cylinder displacement, automatic - Tool holder: HSK-F 63 Njdpfszktdzex Aiqsld Note: The item must be collected between September 22nd and September 24th, 2026, on a date to be agreed upon. FCA D-76227 Karlsruhe - loaded onto a truck.

Condition: used, Year of construction: 2006, machine/vehicle number: 2638006, functionality: fully functional, operating hours: 32,000 h, power: 3 kW (4.08 HP), input voltage: 400 V, type of input current: three-phase, workpiece length (max.): 6,500 mm, workpiece width (max.): 180 mm, workpiece height (max.): 150 mm, number of axes: 1, number of slots in tool magazine: 10, controller manufacturer: Beckhoff, actuation type: pneumatic, total height: 1,800 mm, total length: 14,000 mm, total width: 2,500 mm, overall weight: 1,000 kg, year of last overhaul: 2025, Equipment: CE marking, If you are interested, we would be happy to send you a video. Nsdpfx Aszndl Deiqold On-site inspection is possible. Collection only!

Condition: used, Year of construction: 2013, functionality: fully functional, type of input current: three-phase, sheet thickness steel (max.): 3 mm, overall weight: 15,000 kg, input voltage: 400 V, bending angle (max.): 180 °, working length: 3,200 mm, working range: 3,200 mm, Equipment: documentation/manual, safety light barrier, Technical features: Year 2013 Working length 3200 mm Maximum sheet thickness (iron 400 N/mm2) 3.00 mm Njdswq Rumjpfx Aiqold Maximum sheet thickness (stainless steel) 2.00 mm Maximum sheet thickness (aluminum) 4.00 mm Maximum bending height on four sides 250 mm Upper jaw stroke 650 mm

Condition: good (used), Year of construction: 2000, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, Specifications : Maximum working length 2160 mm Maximum sheet thickness (steel 400 N/mm2) 2.0 mm Maximum thickness of sheet metal (stainless steel) 1.5 mm Maximum sheet metal thickness (aluminum) 3.0 mm Maximum development sheet width 1500 mm Maximum four-sided fold height max * 203 mm Bending blade reach 180 degrees Machine width 5500 mm approx. Machine length 7000 mm approx. Nlsdpfxoqzibtj Aiqod Machine height 2500 mm Total weight 21000 kg Power 18 kW Frequency 50 Hz Pressure 6 bar INCLUDED drag loading system