Used Cyrus Vibrating Chute 2000-800 for sale (17,349)

Condition: ready for operation (used), * Brand: Cyrus * Model: vibrating chute Fsdpfjywm Hrjx Aptsgg * Dim.: length 2000 mm - width 800 mm * with: two pieces vibration motors of each 4,7 kW * Incl.: springs

Condition: ready for operation (used), * Brand: Cyrus * Mode: vibrating chute Fgjdpfxoywnbko Aptog * Length: 3500 mm - width 1300 mm * incl.: two pieces vibration motors of each 4 kW

Condition: ready for operation (used), * Brand: Cyrus Fgsdpfxsywm Hlj Aptjg * Model: vibrating chute * Dim.: length 6000 mm - width 1200 mm * with: two pieces vibration motors of each 7,5 kW * Incl.: springs

Condition: ready for operation (used), * Brand: Jöst * Model: vibrating chute Fsdsywl N Eepfx Aptogg * Dim: length 2000 mm - width 1100 mm, * Driving: with two pieces vibration motors of each 2,2 kW, * incl.: Springs.

Condition: ready for operation (used), * Brand: Jöst * Model: vibrating chute * Dim.: length 2000 mm - width 1100 mm, * Driving: two pieces vibration motors of each 1,2 kW Fedpfx Aeywmqqoptjgg

Condition: ready for operation (used), * Brand: Jöst * Model: vibrating chute * Dim.: length 1500 mm - width 800 mm Fjdpfxsywmucs Aptogg * Driving: two pieces vibration motors of each 1,2 kW. * On stock: 2 pieces.

Condition: ready for operation (used), * Brand: GFA * Model: vibrating chute * Dim.: length 2000 mm - width 1200 mm * with: two pieces vibration motors of each 2,3 kW Fgsdpfjywmi Hex Aptsg * Incl.: springs * Stock: 2 pieces.

Condition: like new (used), Year of construction: 2019, Arburg 1200 T 2000-800 (vertical machine with rotary table 1200mm) Clamping unit 2000T Table diameter: 1200mm Angle rotation: 180 degrees Clamping force: 200 tons Opening force max. kN/mm: 115/500 Platen daylight max. : 600 mm Injection unit Screw diameter: 45 mm Shot volume: 318 cm3 Fsdpfewugczox Aptegg Shot weight: 291 g Injection pressure: 2470 bar 1. Model: T model 2. Machine type: 1200 T 2000 - 800 3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant 4. Screw: Reinforced screw coupling for splined coupling geometry 5. Control system: SELOGICA ‘direct’ controller 6. Technology stage: Stage 2 servo-regulated with 2 control pumps 7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating 8. Nozzle: Open nozzle 45 mm with nozzle tip 9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2 10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating 11. Clamping platen: Mould mounting platen set, central diameter 125 mm 12. Blow unit: Mould blow unit with pressure reducer at station 1 13. Safety: Optical barrier at loading station, continuous oil cooling and filtration 14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper 15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1) 16. Electric axes: Basic equipment for electric axes control 17. I/O: 4 programmable inputs/outputs on terminal rail 18. Sockets: Additional socket combination (1 CEE, 1 Schuko) 19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation 20. Acoustic alarm: Error alarm acoustic signal 21. Safety interlock: Interface for safety interlock of door (EUROMAP 73) 22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold 23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter 24. Manual & labels: CD operating manual & spare parts list, Slovak language labels 25. Machine feet: Anti-vibration footplates 26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme 27. Display languages: IT/EN/SK

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, clamping force: 2,000 kN, Equipment: documentation/manual, Clamping force: 200 t Screw diameter: 55 mm Shot weight: 434 g Distance between tie bars V: 570 mm Distance between tie bars H: 570 mm Shot volume: 474 cm3 Platen dimensions : 795 x 795 mm Working hours: 25.969 h Type: Horizontal Drive: Hydraulic Equipment: Fgedox Ir Ngopfx Aptog 1x core puller Euromap 67

Year of construction: 2026, condition: new, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Heavy Duty Type Inclined Vibrating Screens are designed for the classification of all kind of materials such as medium size aggregates and finished products. • Model: FABO TE-2060 • Type: Vibrating Screen • Size: 2000 x 6000 mm • Deck size: 2-3-4 Fgodpfxozz R E Rs Apteg • Motor: 22 kW Bearings: Heavy duty SKF-FAG • Capacity: 180-220 TPH • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: ready for operation (used), * Brand: Jöst * Model: vibrating chute * On stock: 2 pieces * 1x Dim: length 2000 mm - width 800 mm, * Driving: with two pieces vibration motors of each 1,7 kW. Fgsdsywna Topfx Aptjg * 1x Dim: length 1800 mm - width 800 mm, * Driving: with one vibration motor 0,83 kW. * incl.: steel frame.

Condition: ready for operation (used), * Brand: Hazemag Fgjdpfx Apjywmyfotjg * Model: vibrating chute * Dim. Vibrating Chute: Length 3800 mm - width 1800 mm. * Driving: 2 pieces vibration motors of each 7 kW.

Year of construction: 2010, condition: ready for operation (used), Three similar Arburg injection molding machines are available. 1) Arburg ALLROUNDER 570 A 2000-800, year of manufacture: 2010, clamping force: 2000kN, distance between tie bars: 570mm/570mm, pressure: 575bar, control system: Selogica direct 4.090, operating hours: 91917h, weight: approx. 9800kg. 2) Arburg ALLROUNDER 570 A 2000-800, year of manufacture: 2011, clamping force: 2000kN, distance between tie bars: 570mm/570mm, pressure: 575bar, control system: Selogica direct 4.090, operating hours: 82736h, weight: approx. 9800kg. 3) Arburg ALLROUNDER 570 A 2000-800, year of manufacture: 2011, clamping force: 2000kN, distance between tie bars: 570mm/570mm, pressure: 575bar, control system: Selogica direct 4.090, operating hours: 90722h, weight: approx. 9800kg. Documentation available. An on-site inspection is possible. Fjdpfoznx Hiox Aptogg

Condition: excellent (used), Year of construction: 2020, clamping force: 2,000 kN, Equipment: documentation/manual, Clamping force: 200 t Screw diameter: 50 mm Distance between tie bars V: 570 mm Distance between tie bars H: 570 mm Type: Horizontal Drive: Electric Fgjdoyfh Ulspfx Aptsg Hours: 34535 Available 3 units (2020-2019)

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, For sale is an injection moulding machine from the manufacturer Arburg, model 520 C 2000-800, year of manufacture 02/2006. The machine is in a very good, well-maintained condition. An on-site inspection is possible at any time by prior telephone arrangement. Fgedjw Hpwrjpfx Aptsg

Condition: ready for operation (used), * Brand: ROXON * Model: hopper with vibrating chute * Type: MTS30/1040 * Dim. hopper: 4500 x 2000 x 1000/1800 mm. * Vibrating chute: length 4000 mm - width 1000 mm Fedpfx Aoywmtfjptogg * Driving: 2 pieces vibration motors of each 1,8 kW.

Condition: ready for operation (used), * Brand: Nordberg * Model: hopper with vibrating chute * Dim. hopper: 3000 x 3100 x 2000 mm * Dim. output hopper: 2500 x 1200 x 1500 mm. Fgodpfxjywmh Ae Aptjg * Incl.: steel construction * Vibrating chute: length 6000 mm - width 1400 mm. * Driving: 2 pieces vibration motors of each 7,5 kW. * Incl.: steel construction * Tot. Weight: 28 Tons.

Year of construction: 2007, condition: used, Pulsed plasma nitriding system, manufacturer PLATEG Plasma Technik Grün, type PulsPlasma PP 800, 2000 x 2900, mono with tandem preparation, system no. A 5811, with 1 plasma generator, type PP 800/160, no. AN 7491, year of manufacture 2006/2007, 600 V output voltage, 800 A pulse current, 480 kVA pulsed power, 190 kW connected load, process control type Stange 510, stainless steel vacuum chamber Ø 2000 mm (usable volume 1800 mm), height 2900 mm (usable height 2200 mm), wall thickness 10 mm, batch weight 7,500 kg, process temperature max. 600°C, vacuum pump by Leybold, 13 kW, 2,000 m³/h, DN 160, with pressure sensor and manometer, gas supply, cooling water supply with internal recirculator, overall dimensions: 7,840 mm x 3,470 mm x approx. 7,400 mm height, with control cabinet including 2 cooling units. Fgodpfxeyazhzs Aptsg

Condition: good (used), Year of construction: 2002, functionality: fully functional, filter area: 48 m², filter pressure: 15 bar, pressure: 380 bar, cake thickness: 25 mm, total width: 1,500 mm, total length: 4,800 mm, total height: 1,980 mm, overall weight: 4,600 kg, number of chambers: 44, Equipment: documentation/manual, safety light barrier, For sale is a chamber filter press with the following accessories: Hydraulics, filter plates, safety devices, control system, swing plates, feed pump, press frame (steel platform), 3 cake containers for forklifts. Chamber filter press 800 Side-frame press 15 bar filtration pressure Approx. 540 liters Open filtrate discharge 800x800 PP 25mm chamber depth 44 chambers Approx. 2.5 meters useful length Length 4800 x Width 1500 x Height 1980 mm 4600 kg Price upon request. Fedpfszulf Sjx Aptegg We would be happy to provide you with an individual offer.

Condition: used, Year of construction: 2010, functionality: unexamined, Weinig RS 2000 Fgsdewmw Daepfx Apteg

Condition: ready for operation (used), * Brand: AEG * Model: adjustable vibrating chute * On stock: 4 pieces. Fodozy Rhiepfx Aptjgg * 2x: Dimension= length 1130 mm - width 300 mm, * Incl.: control equipment. * 2x: Dimension= length 1225 mm - width 400 mm, * Incl.: control equipment.

Condition: excellent (used), Year of construction: 2010, operating hours: 79,008 h, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 570 mm, displacement volume: 392 cm³, injection pressure: 2,000 bar, injection weight: 2,000 g, mold height (min.): 250 mm, plate length: 795 mm, plate height: 795 mm, total length: 6,000 mm, total width: 2,000 mm, overall weight: 10,950 kg, 570A-2000-800 /170 two-component hybrid injection molding machine with sorting flap (243) with sorting flap Fsdpfezq A S Isx Aptsgg Number: 243 Availability: in stock Year of production: 2010 Producer: Arburg Injection molding machine condition: used Screw diameter [mm]: 50//35 Injection weight [g]: 359//105 Injection pressure [bar]: 2000//1470 Closing force [kN]: 2000 Column spacing [mm]: 570 x 570 Plate size [mm]: 795 x 795 Min. mold height [mm]: 250-550 Control type: Selogica Tongue: English, German Working hours [h]: 79008 Weight [kg]: 10,950 Dimensions [mm]: 6000 x 2000 Feed hopper: NO Air valve: x5 Core string: 1x

Condition: excellent (used), Year of construction: 2010, operating hours: 58,238 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 55 mm, clearance between the columns: 570 mm, displacement volume: 474 cm³, injection pressure: 1,650 bar, injection weight: 434 g, mold height (min.): 300 mm, plate length: 795 mm, plate height: 795 mm, total length: 6,000 mm, total width: 1,900 mm, overall weight: 7,510 kg, Arburg 570C-2000-800 injection molding machine with conveyor belt (259) bimetallic cylinder Category: INJECTION MACHINES Brand: Arburg Number: 259 Availability: in stock Year of production: 2010 Producer: Arburg Injection molding machine condition: used Screw diameter [mm]: 55 Injection weight [g]: 434 Injection pressure [bar]: 1650 Closing force [kN]: Fsdpszxzttjfx Aptegg 2000 Column spacing [mm]: 570 x 570 Plate size [mm]: 795 x 795 Min. mold height [mm]: 300 Control type: Selogica Tongue: English, German Installed power [kW]: 44.4 Working hours [h]: 58238 Weight [kg]: 7510 Dimensions [mm]: 6000 x 1900 Feed hopper: NO Core string: 2x Robot socket: euros 67 Air valve: 1x + 1x dual coil

Condition: ready for operation (used), * Brand: Metso * Model: vibrating chute (unused) * Type: TKP 10-20 * Dim: length 2000 mm - width 1000 mm, * Driving: with two pieces vibration motors of each 1,8 kW * incl.: springs. Fjdpfx Apjywm U Aetogg * On stock: 3 pieces.

Condition: excellent (used), Year of construction: 2013, operating hours: 19,500 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 45 mm, Very low hours Arburg 570 E 2000-800 moulding machine fitted with Wittmann Primus 16T robot Arburg 570 E 2000-800 moulding machine specs; Hours = 19,800 Year = purchased new in December 2013 Fedpfx Apjyxhaijtegg Tonnage = 200 Screw diameter = 45mm Shot weight (g PS) = 291 Wittmann Primus 16T robot specs; Hours = very low Year = purchased new in June 2021 Travel = Z=2000mm, Y=1000mm, X=590mm comes with integrated conveyor and cell panels