Used Dücker Kehrmaschine Hdk 1300 for sale (2,523)

Condition: used, driver cabin: other, gearing type: other, Year of construction: 2022, Additional features: * LED boundary lights * Hydraulic tilting to the right/left * HDK sweeping machine – front mounting * Municipal narrow-gauge vehicles * Paint finish: RAL 2011 * Additional cost for sweeping rollers, consisting of disc brushes with plastic-coated wire * Set of flags * Dirt collection tray with hydraulic emptying and front impeller * Water spray system in front of the brush and, if applicable, on the side brush, including an electrically driven water pump, 12 volts / 24 volts (please specify) Other: * Trade-in and purchase of vehicles and machines possible. * Sale price excluding transport and delivery. * No liability for printing and typographical errors. * Errors, changes, and prior sale are subject to change. * Offer subject to change. * Photos may vary. Price applies to the existing condition. Guodpfx Ajzduw Aohaef * All information without guarantee.

Condition: used, Year of construction: 2017, functionality: fully functional, overall weight: 620 kg, color: orange, Equipment: power take-off driven, Dücker FKM 2400 Sweeper Year of manufacture: 2017 620 kg Max. speed: 250/min Max. hydraulic pressure: 200 bar Gedpfxey Ux A Te Ahajuf PTO drive Lighting Three-point linkage Suitable for Unimog, for example

Condition: used, mileage: 1,800 km, first registration: 04/2020, overall weight: 9,000 kg, axle configuration: 2 axles, These front-mounted sweepers can be operated via the front PTO shaft. Of course, we can also accommodate your specific requirements, special requests, and additional optional equipment. The brush rollers are equipped with alternating plastic and wire brush discs as standard to achieve the best possible sweeping result, even with heavy and stubborn dirt. * Dücker FKM 2400 * with municipal mounting plate receiver * Device plate size 3 and 5 * Very little use and always stored in a hall * Working width 0°. 2,400 mm * Working width 15° 2,300 mm * Working width 30° 2,075 mm * Sweeper roller diameter: 600 mm * Hydraulically raise/lower * Hydraulically swivel right/left * 2x water tank * Water spray system * Support wheels * Support Made from a sturdy, torsion-resistant housing with double-walled construction. The sweeper roller is suspended and can be adjusted in height, with stepless control, and consists of disc brushes in plastic-wire, 600 mm diameter, and heavy-duty wheels, 250 mm diameter, directly attached to the housing. Working width: 2.4 m Overall width: 2.65 m Gedpjziudmsfx Ahajuf Sweeper roller diameter: 600 mm Lifting device for front quick-change system: Device plate size 3 or 5, including cylinder Hydraulic drive, minimum oil flow at 180 bar: 40 l/min Weight: 580 kg Additionally equipped with: Hydraulic tilting of the brush to the right/left Water spray device in front of the sweeper brush Boundary lights LED and warning flags Switching valve, electric Financing is possible through our partner banks; we are happy to assist you. We expressly reserve the right to sell the item in the meantime, as we also offer this item on other platforms. Information on accessories is provided without guarantee. Subject to change, prior sale, or errors. We strongly recommend and offer an inspection and examination so that no false impressions arise in the buyer regarding the condition and suitability. Inspections and examinations are possible at any time by prior arrangement and are expressly desired.

Condition: good (used), Poma LS 1300 rotary bookbinding shears Production in Germany. Shears in good condition, ready for production. The construction made entirely of cast iron ensures rigidity and repeatability of cutting. Cutting width approx. 1300mm Ideal for bookbinding cardboard. Gjdpfxeztn S Se Ahajuf Side margin. The machine has a feeder. 8 sets of knives Weight 1500kg

Condition: excellent (used), CATALOGUE NUMBER 7554 Technical specifications: - Roller width: 1350 mm - Max. pass-through height: 70 mm - Glue application: single- or double-sided - 2-roller system - Diameter of glue application rollers (top/bottom): 160 mm - Main motor: 0.75 kW - Dimensions (L/W/H): 2000x750x1550 mm - Weight: approx. 534 kg Gjdpfx Aezc Nmwehaouf ADVANTAGES – German manufacture – Used glue applicator – In very good condition Net price: 13,900 PLN Net price: 3,300 EUR (based on an exchange rate of 4.2 EUR) (Prices may vary with significant fluctuations)

Condition: not inspected (used), Year of construction: 2005, Without battery Gsdpohzrbnefx Ahajuf Manufacturer: Fimap

Condition: excellent (used), Year of construction: 2002, including Sheetmaster, Toolmaster, and Gripmaster Gedpfxozp Dwpe Ahasuf Hours: 11,800 Location available upon request Images available upon request

Condition: excellent (used), Year of construction: 1990, Description to follow! Gjdpfx Ahoxzk Iljajuf

Condition: good (used), Primultini band saw Gjdpfed Sclhex Ahaeuf Roller diameter: 1300 mm Roller width: 140 mm with Planomatic system

Condition: used, Year of construction: 2014, power: 90 kW (122.37 HP), gearing type: other, first registration: 12/2014, overall weight: 12,000 kg, empty load weight: 9,210 kg, maximum load weight: 2,790 kg, driver cabin: other, wheelbase: 1,250 mm, Equipment: cabin, compressed air brake, crane, front power take-off, * German vehicle * First owner * Complete service history * Full documentation for the crane and shredder * Previously owned by a municipal authority * Dücker Mix Shredder DMS 500 * Crane Kesal 204 T * Very rare version with enclosed operator cabin * Operation possible in all weather conditions * Crane reach 6.15 m * 1 hydraulic extension * Lifting capacity of 450 - 1,150 kg * 5th and 6th control circuit * 2 hydraulic outriggers * 2 return screws * Rotary servo Finn Rotor * Grapple Kesla * Dücker Mix Shredder with 5 m³ container * 1 shredding screw * Throughput of up to 20 m³/h of finished material * Discharge conveyor belt hydraulically adjustable * Maximum stacking height 2,000 mm * Central lubrication system * Rotating beacon * Work lights * Air pressure brake * 25 km/h and 80 km/h approval * PTO drive 1000 rpm from 90 kW * Fixed drawbar * Optional 40 mm eye or agricultural K80 trailer coupling * Overall length 7,600 mm * Overall height 3,850 mm * GVW 12,000 kg * Unladen weight 9,210 kg * Payload 2,790 kg If a new TÜV inspection is desired, we will be happy to provide you with a quote from our partner workshops. Our offer generally does NOT include a new TÜV inspection, a new DGUV, a new SP, or a new UVV. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish Godpfjzh Nxvjx Ahasuf Note: We strongly recommend and offer the opportunity to inspect and test the goods so that the buyer does not have any false impressions about the condition and suitability. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. We are not liable for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicle. Subject to changes, prior sale and errors.

Condition: used, empty load weight: 9,210 kg, maximum load weight: 2,790 kg, overall weight: 12,000 kg, first registration: 12/2014, wheelbase: 1,250 mm, Year of construction: 2014, power: 90 kW (122.37 HP), gearing type: other, driver cabin: other, Equipment: cabin, compressed air brake, crane, front power take-off, German vehicle, first owner, complete service history, full documentation for the crane and shredder, previously owned by a municipality, Dücker Mix Shredder DMS 500, Crane Kesal 204 T, very rare model with protected operator cabin, capable of operating in all weather conditions, crane length 6.15 m, 1 hydraulic extension, lifting capacity of 450 - 1,150 kg, 5th and 6th control circuits, 2 hydraulic outriggers, 2 transport augers, rotary servo Finn Rotor, grapple Kesla, Dücker Mix Shredder with 5 m³ container, 1 shredding auger, up to 20 m³/h throughput of finished material, discharge conveyor belt hydraulically adjustable, maximum stacking height 2,000 mm, central lubrication system, rotating beacon, work lights, air brake, 25 km/h and 80 km/h approval, PTO drive 1000 rpm from 90 kW, fixed drawbar, optional 40 mm eye or agricultural K80 trailer coupling, overall length 7,600 mm, overall height 3,850 mm, gross vehicle weight 12,000 kg, tare weight 9,210 kg, payload 2,790 kg. If a new TÜV (technical inspection) is desired, we will gladly provide you with a quote from our partner workshops. Guedpfxjzh Nx Ae Ahajf Our offer generally does NOT include a new TÜV inspection, new DGUV (German Social Accident Insurance) certificate, new SP (safety report), or new UVV (accident prevention regulations) certificate. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish. Note: We strongly recommend and offer an inspection and evaluation of the goods so that the buyer does not have any false impressions about the condition and suitability. Inspections and evaluations are possible at any time by appointment and are expressly desired. All information is without guarantee. We are not liable for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicle. Subject to changes, prior sale and errors.

Condition: good (used), Technical data for the pallet racking crossbar: Racking system: Stow Type: Pal Rack OP Included in the scope of delivery: 01x Pallet racking crossbar, used Material color: blue Box profile: 110 x 50 mm Clear width: 1,300 mm Maximum load per crossbar pair: 2,000 kg, with evenly distributed load 02x Locking pins, used Design: fully galvanized For securing the longitudinal beams against unintentional lifting out General information about the item: This item is offered for collection only. Any additional transport Gsdshlhfgspfx Ahasuf or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: like new (used), Year of construction: 2015, nominal power: 1,300 kW (1,767.51 HP), rotational speed (min.): 1,493 rpm, rotational speed (max.): 1,493 rpm, input voltage: 6,000 V, input frequency: 50 Hz, overall weight: 6,100 kg, 1 asynchronous electric motor Manufacturer: Reform Elektromotorenbau GmbH Type: Y2-500-4 Power: 1300 kW Speed: 1493 rpm Voltage: 6000 volts Current: 151.4 A cos Φ: 0.86 Insulation class: F Frequency: 50 Hz Protection class: IP55 Design: Foot (B3) Operating mode: S1 continuous operation Gedpfov I Alyox Ahaouf Weight: 6100 kg Year of manufacture: 12/2015 Bearings: NU228C3 / 6030C3 and NU228C3 Cooling: Air Shaft height: 500 mm

Condition: used, Year of construction: 2010, Rear attachment Hydraul. Side shift Support roller Freewheel in drive train / PTO shaft VAT NOT DISCOUNTABLE / Godsual Ucopfx Ahajuf

Condition: good (used), Year of construction: 2016, clamping force: 13,000 kN, Equipment: documentation/manual, KraussMaffei KM 1300 MX – SP 8100 / Screw Ø105 mm Clamping Unit Guodpfx Ahoztpkpsajf 1. Clamping force: 13,000 kN / 1,300 t 2. Mold opening force: 910 kN 3. Moving platen force, opening/closing: 159 / 153 kN 4. Platen dimensions: 2,150 × 1,910 mm 5. Distance between tie bars (H × V): 1,550 × 1,250 mm 6. Opening stroke: 2,350 mm 7. Mold height min./max.: 700 / 1,400 mm 8. Maximum daylight: 3,050 mm 9. Ejector stroke: 350 mm 10. Ejector force forward/backward: 250 / 125 kN 11. Optional increased mold height min./max.: 950 / 1,650 mm 12. Daylight with increased mold height: 3,300 mm Injection Unit – SP 8100 Screw diameter: 105 mm 1. L/D ratio: 23 2. Maximum injection pressure: 1,778 bar 3. Stroke volume: 4,546 cm³ 4. Shot weight PS: 4,137 g 5. Injection flow rate: 805 cm³/s 6. Screw speed nominal/max.: 126 / 159 rpm 7. Plasticizing rate PS at nominal speed: 147 g/s 8. Plasticizing rate PE at nominal speed: 116 g/s 9. Plasticizing rate PS at maximum speed: 187 g/s 10. Plasticizing rate PE at maximum speed: 147 g/s 11. Nozzle contact force: 166 kN Electro-Hydraulic Equipment 1. Pump motor rated power: 110 kW 2. Installed heating capacity: 59 kW 3. Barrel heating/control zones: 7 4. Dry cycle rate according to Euromap 6: 761 cycles/h 5. Dry cycle time according to Euromap 6: 4.7 s 6. Oil tank capacity: 1,500 l Dimensions & Weight 1. Net weight incl. control cabinet: 77 t 2. Dimensions (L × W × H): 12.09 × 3.66 × 2.67 m 3. Maximum mold weight: 29,000 kg With Electric Screw Drive 1. Screw drive power: 117 kW 2. Screw speed nominal/max.: 123 / 193 rpm 3. Plasticizing rate PS nominal: 144 g/s 4. Plasticizing rate PE nominal: 114 g/s 5. Plasticizing rate PS maximum: 226 g/s 6. Plasticizing rate PE maximum: 178 g/s With Accumulator (ZE) 1. Injection flow rate: 1,732 cm³/s Equipment: 1. Removable tie bar (rectable tie bar) 2. Euromap 67 for robot 3. 48 Hotrunner controllers 4. 8 pneumatic cascades 5. 6 hydraulic cascades 6. 2+2 cores 7. MC 6 controll panel Material used: PP, PC

Condition: excellent (used), Year of construction: 2020, clamping force: 300 kN, Clamping force: 300 t Screw diameter: 60 mm Distance between tie bars V: 720 mm Distance between tie bars H: 720 mm Type: Horizontal Drive: Hybrid Hours: 23000 core puller 1 Gsdpfxjyfh Rmj Ahajuf pneumatic core puller controll euromap 67 2 servo pumps. machine is without robot and accessories.

Condition: used, functionality: fully functional, Equipment: double-sided, Amod CDL 1300, double-sided adhesive applicator Working width: 1300 mm Min./max. clearance: 0-90 mm Diameter of application rollers: 170 mm Two feed speeds Gujdpfx Ahozrlykjaef Year of manufacture: 1994

Condition: new, cutting diameter 1100 mm saw band length 11000 x 67 mm cutting width 1,6 mm capacity 90 degrees: square 1100 x 1100 mm capacity 90 degrees: flat 1100 x 1300 mm total power requirement 7,5 kW / 3100 Nm weight of the machine ca. 8700 kg dimensions of the machine ca. 2800 x 1700 x 5200 mm The KSY 550 x 700 is a semi-automatic and column-guided horizontal bandsaw. The chips are transported away via a spiral conveyor. A chip trolley approx. 60 x 50 x 40 is included in the scope of delivery. The roller tables can be moved forwards and backwards via the control panel. There is a 1.40 x 1.00 metre roller table on the outfeed side. There is a motorised roller table 2 x 1.40 m on the infeed side. Gsdpfx Ahsymf Ryjajuf Optional Specifications - Motorized System For Roller Table - Laser Line - Extra Double Roller Table - PLC-Screen - Anti-Vibration System The pictures are for orientation only and do not represent a true-to-scale image of the machine.

Condition: new, Year of construction: 2025, cutting diameter 650 mm saw band length 8830x67x1,6 mm cutting width 1,6 mm Control halbautomatisch Cutting area - square 650 x 650 Cutting area - flat 650 x 1300 total power requirement 7,5kW / 3100 Nm weight of the machine ca. 5100 kg dimensions of the machine ca. 2100x1550x4450 mm The KSY 650 X 1300is a semi-automatic and column-guided horizontal bandsaw. Optional Specifications - Motorized System For Roller Table - Laser Line - Extra Double Roller Table - PLC-Screen - Anti-Vibration System Gsdpfxsy S Duis Ahasuf The pictures are for orientation only and do not represent a true-to-scale image of the machine.

Condition: new, cutting diameter 1100 mm saw band length 12000 x 67 mm cutting width 1,6 mm Capacity 90° - round 1100 mm Godeymf Ncopfx Ahasuf Capacity 90° - rectangle 1100 x 1100 mm Capacity 90° - square 1100 x 1300 mm total power requirement 7,5 kW / 3100 Nm weight of the machine ca. 12.000 kg dimensions of the machine ca. 3300 x 3000 x 5300 mm The KSS 1100 X 1300 is a semi-automatic and column-guided horizontal bandsaw. In addition, the machine has a driven roller table, which is 1 metre long.

Condition: used, Year of construction: 1996, machine/vehicle number: A9611003/0100, Technical data: - Manufacturer: Venjakob - Type: VBS 1300 - Working width: 1.300mm Gjdpfxoyyyhus Ahaeuf - Year of construction: 1996 - Operating side: left - Electric height adjustment of the sanding rollers - Constant table height, working height 920+-20mm - Manufacturer of brush sanding heads: Flex Trimm - Number of brush sanding heads: 2 pieces - Diameter of the sanding heads: 280/390mm - Sanding centre length 55mm - Roller1, grit 240, roller2, grit 280 - Speed of the brush sanding heads: 100-1000 rpm - Angled brushes - With brush oscillation - With vacuum belt - Feed speed: 1.5 - 7.5m/min. - Motor power 4KW - Machinelength: 3.500mm - Very sturdily built machine - Colour: light grey RAL 7035 - Total connected load 16KW - weight: 2740 kg

Condition: used, Year of construction: 2014, machine/vehicle number: 753.04.14, Equipment: - Brush grinding machine with rotating grinding brush belt - Motorized height adjustment of the grinding unit, adjustment range from approx. 0 - 80 mm, freely programmable via machine control. - Operating side in the direction of travel, right - Rotating brush set consisting of 174 segment brushes, length 1,300 mm. Segments are easy to change and are inserted into the brush belt from the side. - With vacuum conveyor belt Godpsxrb Rfsfx Ahajuf - With cleaning roller for the feed belt Technical data: - Working width: 1300 mm - Max. part thickness approx. 80 mm (depending on the abrasive coating) - Working height: 850 - 900 mm - Year of manufacture 2014 - Feed continuously adjustable, 3 m/min-10 m/min - Machine length: 3860 mm - Machine width: 2400 mm - Machine height: 2000 mm - Paint finish in RAL 7035, light gray with - Contrast color green - Voltage: 400V/50HZ - Electrical connection 16kW/36A - Machine weight: approx. 2600 kg

Condition: used, Year of construction: 1998, machine/vehicle number: 610082, Technical Data: - Manufacturer: Ernst - Type: BM 2 - 1300 - Year of Manufacture: 1998 - Max. brush width: 1,300 mm - Max. brush diameter: 400 mm - Max. working height: 100 mm - Brush motors: 2 × 5.5 kW - Vacuum motor – rated power 7.5 kW - Vacuum motor – speed 2,800 rpm - Height adjustment motor – rated power: 0.45 kW - Height adjustment motor – speed 1,410 rpm - Brush speed 30-350 rpm - Feed rate 3-15 m/min. - Weight: 1900 kg Guodpfx Ahezubpasaof 2.5 ELECTRICAL CONNECTION - Operating voltage 400 V - Frequency 50 Hz - Fuse to be provided by the customer: 63 A - Full load current: 47 A - The cross-section of the supply cable must be at least AWG 2 (25 mm2). 2.6 PNEUMATIC CONNECTION - Operating pressure 6–8 bar - Maximum pressure 8 bar 2.7 EXHAUST CONNECTION - Connection size 4 x Ø = 140 mm - Air requirement 1,108 m3/h per connection - Minimum air velocity at the connection on the machine 20 m/s - Vacuum at the exhaust connection 1,180 Pa For blowing device: - Connection size 3 × Ø = 80 mm - Air requirement 390 m3/h per connection - Minimum air velocity at the connection on the machine 20 m/s - Vacuum at the exhaust connection 950 Pa - Vacuum outlet 1 × Ø = 200 mm, 300 m3/h

Condition: new, machine/vehicle number: 12007, Technical data: Cutting area: 700 x 1300 mm Gjdpfjyr Tpusx Ahaeuf Number of cutting discs: 18 Cutting disc width: 65 mm Scrapers: 2 Drive power: 2x 15 kW, 400 V, 50 Hz Weight: 2900 kg

Condition: excellent (used), Year of construction: 2010, I sell the 1-head 1-lamp UV-drying tunnel Burkle TRUV 1300 Year 2010 Working width 1300mm. Total length 2,00m Total power 18,7kW 1 Lamp GA 120 W Very good condition, available immediately. Gujdpfxovxa T Ae Ahajf