Used Deckel Schwenk Dreh Tisch Fp2 for sale (1,707)

Condition: used, Year of construction: 1985, functionality: fully functional, table length: 680 mm, table width: 380 mm, table height: 345 mm, For sale is a Deckel milling table, which was installed on an FP2 milling machine. The angle and rotation functions are fully functional, unfortunately there is no longer a crank. Signs of use on surface recognizable on pictures Dimensions: 38*68 cm Height: 25 cm Rjdpfx Asuuh Susguscb

Year of construction: 1990, condition: good (used), Various collets and holders Approx.300 pieces. For DECKEL milling machines FP1 -FP2-FP3-FP4 Single sale demand inquiries. Rcodshvz Iiepfx Aguob

Condition: used, x-travel 300 mm y-travel 300 mm z-travel 400 mm Control Dialog 11 turning speed range - main spindle 40 - 4000 min/-1 tool taper SK 40 swivellable +/- 90 ° quill stroke 80 mm Rjdpfx Agsy Ty I Uouocb In our opinion, the machine is in very good used condition and can be inspected under power by appointment. Accessories: - Cabin Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as prior sale reserved!

Condition: good (used), Year of construction: 1982, functionality: fully functional, Tool milling machine with 3D control, manual handwheels, and a universal table adjustable in three axes. Control: Deckel Dialog Control 4: 3D contouring control, including drilling and milling cycles Monitor, electronic handheld control panel Terminal for program input and output Technical specifications: Travel range X/Y/Z 300 x 220 x 400 mm Speed 31.5 - 3,150 rpm with 21 gear stages Feed rate 4-2,000 mm/min Rapid traverse 4 m/min Drive power 1.6-2.0 kW SK 40 tool holder Hydraulic tool clamping Universal milling table with digital display: Clamping area 600 mm x 320 mm Table load 180 kg C-axis rotation range 360° A-axis tilt range 15°/45° B-axis swivel range +/- 45° Vertical milling head: Manual quill stroke - horizontally 65 mm, vertically 60 mm Additional equipment: Manual machine handwheels with scale Direct travel measurement of the NC axes Cooling water system Special accessories: Rsdpfx Aowid Speguscb Approx. 33 tool holders (without tools) - see photo High-speed milling spindle Machine data: Machine weight approx. 1,380 kg Space requirement including accessories L approx. 2,940 mm, W approx. 1,900 mm, H approx. 1,960 mm Power supply: 380 V, 50 Hz, 12 kVA The machine is in good, fully functional condition. It can be inspected with power and chippings by appointment.

Condition: used, power capacity / kW volt / V ampere / A Rodpfxsy S Eb Rs Aguocb DECKEL MONITOR Bildschirm DIALOG FP2 / FP3

Condition: good (used), Year of construction: 1975, Deckel FP2 FPS retrofitted tool milling machine with a 3-axis Heidenhain digital display. The machine is in good condition and comes from a training department. It features a fixed table, electrically interlocked milling head guard, and an SK 40 spindle mount. Accessories include various collets and milling arbors. It is in good, operational condition. A demonstration under power can be arranged. Rcjdpfx Agszac Sbeuob

Condition: ready for operation (used), A universal milling machine is offered. Travel paths X/Y/Z: 400mm/200mm/400mm, table clamping surface X/Y: 700mm/280mm, tool holder: SK40, speed range: 40rpm - 2000rpm, control system: manual. Equipped with vertical milling head, angle table, spindle guard, coolant system. Weight: approx. 1100kg, overall dimensions X/Y/Z: approx. 1200mm/1100mm/1600mm. Inspection possible by arrangement. Rjdpfxjy Tavrj Agujcb

Condition: excellent (used), Year of construction: 1979, functionality: fully functional, Universal Milling Machine Deckel FP2 with 3-Axis Active – TNC 111 Digital Readout by Heidenhain, incl. Accessories, Excellent Condition Technical Data: >> Year of manufacture: 1979, Machine No. 2202-10512 >> Fixed angle table >> Spindle speeds: 25 – 2500 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 2.2 kW >> Spindle brake >> Travel X/Y/Z: 400/220/400 mm >> Vertical milling head adjustable 150 mm on spindle carrier >> Vertical and horizontal quill – SK40 extendable >> Drawbar system M16 >> Weight approx. 1400 kg Equipment and Accessories: >> 3-axis TNC 111 Active digital readout by Heidenhain >> Coolant system >> Central lubrication >> 1 accessory cabinet containing: Collets, tool holders, clamping tools, tailstock, Dividing head with 3-jaw chuck, vise, tailstock, indexing plates, and much more Rsdpfx Aoy H Ibcjguocb About the Machine: For sale is a Deckel FP2 universal milling machine in excellent condition. The FP2 comes from a state-operated laboratory where it saw only minimal use. It includes an accessory cabinet with a wide range of tools. The machine has very little backlash, and all spindles move smoothly. The geometry is outstanding. Even at maximum spindle speeds, the milling machine runs quietly. On this newer FP2 model, the feed on all three axes is continuously adjustable and each axis has rapid traverse. A major advantage is the active 3-axis digital readout. With the Heidenhain digital control, set dimensions can be entered and the machine will automatically travel to these positions. An oil change has been carried out. The machine has been mechanically and electrically checked. The Heidenhain digital display makes operation easier and even more precise. Take advantage of the opportunity to view and test the machine under power on site.

Condition: ready for operation (used), machine/vehicle number: 46436, Travel distances: longitudinal: 400 mm vertical: 400 mm horizontal: 200 mm Features: - Sliding vertical milling head - Tilting angle table 260 x 600 mm - Various tool holders - Setup elements - Rotary table D:280 mm - Documentation Rcsdpfxjygia Eo Agueb Condition: workshop-tested

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 9585, DECKEL Universal Milling and Drilling Machine Model: FP 2 Machine No.: 9585 Year of manufacture: 1978/79 Condition: Good, operational condition Travel distances: longitudinal: 400 mm vertical: 400 mm horizontal: 200 mm Rodpfxeygicao Aguscb

Condition: reconditioned (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 25 rpm, year of last overhaul: 2026, Dear Sir or Madam, We are offering for sale a Deckel FP2 Aktiv. This newer model is particularly notable for its infinitely variable spindle speed control with Heidenhain Aktiv control, making operation both very simple and extremely comfortable. The machine has undergone extensive partial refurbishment in our workshop and is therefore in excellent condition. You are welcome to inspect the machine on site. Delivery time: on request Machine number: 2202-xxxx Table: Rigid angle table or rotary-tilting-swiveling table Travel (X/Y/Z): 400mm / 220mm / 400mm Drive power: 3 kW Number of spindle speeds: 16 Speed range: 25-2500 rpm Tool holder: SK40 Drawbar system: S20x2 Feed: Infinitely variable Equipment and accessories: 3-axis Heidenhain digital readout, stepless feed adjustment on all 3 axes, Heidenhain digital readout with Aktiv control, coolant system, central lubrication, technical documentation, machine leveling feet, safety devices (optional) Our service promise to you: - We are a certified master workshop specializing in mechanical engineering - All machines are thoroughly inspected - All lubricants and any worn parts are replaced in advance - On request, we can fully or partially overhaul the selected machine for you - If desired, you can order further accessories such as tools, etc. directly - If desired, we can install additional equipment such as safety devices, etc. directly - We are also happy to handle shipping and/or installation for you Rcedpfxjx Hr Dzs Agujb

Condition: reconditioned (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 25 rpm, year of last overhaul: 2026, Equipment: documentation/manual, Dear Sir or Madam, We are offering a partially overhauled Deckel FP2 for sale. This newer model stands out particularly due to its stepless speed control, which makes operation very easy and extremely comfortable. The machine has undergone an extensive partial overhaul in our workshop and is therefore in excellent condition. You are welcome to inspect it on site. --- Currently 3 units available for immediate delivery! --- Availability: 3x immediately Machine no.: 2202-xxxx Table: fixed angular table or rotary-tilt-swivel table Travel distances: X 400mm / Y 220mm / Z 400mm Drive power: 3kW Number of spindle speeds: 16 Speed range: 25-2500 rpm Rcsdey Exayopfx Aguob Tool holder: SK40 Drawbar thread: S20x2 Feed: stepless Equipment and accessories: Heidenhain 3-axis digital readout, stepless feed regulation on all 3 axes, coolant system, central lubrication, technical documentation, leveling feet, safety devices (optional) Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines are thoroughly inspected - All lubricants and, if necessary, worn parts are replaced in advance - On request, we can fully or partially overhaul your selected machine - If desired, you can order additional accessories such as tools, etc. directly - If required, we can directly install further equipment such as safety devices - We are happy to arrange shipping and/or installation for you

Condition: good (used), DECKEL universal table - small - , used Clamping surface 800 x 240 mm Rcsdpfxey Ahnzj Agusb Weight estimated approx. 0.1 t

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 2836-0192, Machine in good used condition, Dialog 11 control. Until recently, it was only rarely in operation in our own workshop. Documentation/manuals etc. are available. Additional accessories, cutters, zero point probes, etc. can be purchased optionally. Rcodpfxsylawxo Agueb

Condition: good (used), Year of construction: 1975, Deckel FP2 FPS retrofit tool milling machine with 3-axis Heidenhain digital readout. The machine is in good condition and comes from a training department. Fixed table, extended milling head, SK 40 spindle taper. Accessories include various collets and arbor holders. Good, operational condition. Can be demonstrated under power by arrangement. Rodpfx Ageyhbn Reuocb

Condition: good (used), Year of construction: 1976, Deckel FP3 tool milling machine with 3-axis Heidenhain digital display, the machine is in good condition. Rigid table, SK 40 spindle taper, accessories: various collets and arbor holders, counterholder. Good, operational condition. Can be demonstrated under power by arrangement. Rsdpfx Agjxbx R Usuecb

Condition: excellent (used), Year of construction: 1979, Deckel FP2 Aktiv tool milling machine with 3-axis Heidenhain TNC 111 Aktiv digital readout. The machine is in very good condition and comes from a state training department. Fixed table, SK 40 spindle taper. Accessories: various collets and arbor holders, tailstock. Very good, ready-to-operate condition. Can be demonstrated under power by arrangement. Rjdpfoxyhmvsx Agujcb

Condition: good (used), Year of construction: 1973, Deckel FP2 tool milling machine with 2-axis Heidenhain digital readout, rigid table, SK 40 spindle holder. Long sliding milling head, accessories: various collets and milling arbors, counter holder. Good working condition, can be demonstrated under power by arrangement. Rcedpfx Ajumclaegujb

Condition: excellent (used), feed length X-axis: 400 mm, feed length Y-axis: 200 mm, feed length Z-axis: 400 mm, For sale is a conventional milling machine of the brand Deckel and type FP2 The machine is in very good condition, has been overhauled by the Harich company (date unknown) and is ready for immediate use Technical data Tool holder: SK 40 Travel X/Y/Z: 400 / 200 / 400 mm Speed range: 40 - 2000 rpm Vertical spindle travel: 60 mm Horizontal spindle travel: 100 mm Feed rates: 8 - 400 mm/rev Table size: 700 x 330 mm Motor power: 2.2 kW Connection: 400 V / 16 A plug Weight: approx. 1300 kg Vice and tools are NOT included in the offer, but can be offered. On request, transportation and loading can be organized for an extra charge. can be organized throughout Europe. Rcsdpsu Ti Aksfx Agusb Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Year of construction: 1968, condition: good (used), For sale is a milling machine Deckel brand from 1968 The machine is in a good to very good condition and fully functional (No digital display but can be mounted additionally on request) Technical data: Tool holder: SK 40 Travel X/Y/Z: 400 / 200 / 400 mm speed range: 40 - 2000 rpm spindle travel vertical: 60 mm spindle travel horizontal: 100 mm Rcodpoihf Etsfx Agueb feeds: 8 - 400 mm/rev table size: 700 x 330 mm motor power: 2,2 kW connection: 400 V / 16 A plug weight: approx. 1300 kg All prices plus VAT Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website

Condition: good (used), For sale is a Deckel FP2 with high-speed milling head (V-belt drive with gear ratio) The machine was only used for copper & graphite processing, so it is not subjected to heavy use The machine is ready for use and fully functional A digital display can be retrofitted for an additional charge. The machine can also be sold without a milling head. Rcsdpelz R Iwofx Aguob Partial device NOT included Accessories available for an additional charge Tool holder: SK 40 Travel paths X/Y/Z: 400 / 200 / 400 mm Speed range: 40 - 2000 rpm Vertical spindle travel: 60 mm Horizontal spindle travel: 100 mm Feed rates: 8 - 400 mm/rev Table size: 700 x 330 mm Motor power: 2.2 kW Connection: 400 V / 16 A plug Weight: approx. 1300 kg All prices plus VAT Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit us on our website

Condition: as good as new (ex-display), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 2801 002016, travel distance X-axis: 300 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 6,300 rpm, spindle speed (min.): 31 rpm, quill stroke: 80 mm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 4 m/min, rapid traverse Z-axis: 4 m/min, table width: 620 mm, table length: 390 mm, table load: 250 kg, overall weight: 1,700 kg, space requirement width: 1,800 mm, space requirement length: 1,400 mm, space requirement height: 1,800 mm, input frequency: 50 Hz, Equipment: documentation/manual, The machine is very stable and robust in its design and construction. Thanks to its good accessibility, it is extremely user-friendly. The machine can also be operated using mechanical handwheels. CNC Contouring Control DECKEL Dialog 4 Easy-to-program 3D path control with color graphic support, dialog-guided cycle input, contour calculator, editor functions, clear program and tool management, and the option for parallel programming. Travel distances X / Y / Z: 300 / 300 / 400 mm Tool holder: SK40 DIN 69872 Clamping system: Hydromechanical clamping system SK40 with pull stud according to DIN 2080 or DIN 69872 Working spindle: Vertical and horizontal. Manual quill stroke: vertical 80 mm and horizontal 65 mm. Milling head: Manually swiveling +/- 90° Rodpfx Ageywhvheujcb Speed range: 31.5–6300 rpm stepless, geometrically stepped direct gearbox for maximum torque and milling performance at the working spindle. Direct gearbox for maximum torque and milling performance at the spindle. Feed rate: 2–3600 mm/min, infinitely variable feed Rapid traverse: 4000 mm/min Angular table: 620 x 390 mm, max. load 450 kg

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Universal milling machine Deckel FP2 repowered by FPS built in 2013 with 3-axis digital readout Heidenhain ND 780 As good as new !!! Technical data: >> Machine no. 2202-7020 FPS no. 3364 Year of construction 2013 >> Rigid angle table Rcedpfx Ajvbifgogueb >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power .:2.2 KW >> Travel X/Y/Z: 400/200/400 mm >> Equipment: Vertical & horizontal spindle >> Vertical quill and horizontal quill extendable - SK- 40 >> Tightening system S20x2 >> Weight approx. 1100 kg Accessories and equipment: >> 3-axis digital readout Heidenhain ND 780 >> Brake motor with immediate spindle stop >> Central lubrication >> 2 x emergency stop >> Operating instructions >> Coolant device To the machine : We offer a universal milling machine Deckel FP2 repowered by FPS in mint condition. The Deckel is equipped with a brake motor for immediate spindle stop. The machine has an electric central lubrication system. With two emergency stop switches for safety. Mechanically and electrically tested as of 2013. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out the lids under power on site. The machine is available immediately.

Condition: used, Counter bearing and adapter for milling machine for horizontal milling Counter bearing and adapter (counterholder) for DECKEL milling machine Redpfx Aoxcbl Djguecb (Bearing block with dovetail mounting adapter DECKEL FP1 + FP2) Type 9570 Dovetail width, narrow: approx. 72 mm Dovetail width, wide: approx. 88 mm Dovetail height: approx. 15 mm Length (bearing block): 133 mm Width (bearing block): 50 mm Total height (bearing block): 105 mm Bearing bore: Ø 17 mm (with bronze bearing bushing) Distance from bore axis to dovetail mounting face: approx. 82.5 mm (center height) - Adapter fits dovetail and mounting surface, raises center height by 22.5 mm to 105 mm Total length (dovetail rail): 635 mm Weight: 3.8 kg Very good condition

Condition: good (used), functionality: fully functional, Universal milling machine Deckel FP2 in special paint finish light gray with 3-axis digital display K+C NEW Technical data: >> Machine no. 5983 Year of construction approx. 1975 >> Rigid angular table (newly revised) >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power .:2,2 KW >> Travel X/Y/Z: 400/200/400 mm >> Equipment: Vertical & horizontal spindle >> Vertical quill and horizontal quill extendable - SK- 40 >> Tightening system S20x2 >> Weight approx. 1100 kg Accessories and equipment: >> 3-axis digital display K+C Newly assembled with manufacturer's warranty. Display unit: Reference points, setting zero points, entering coordinates, mm/inch switching, absolute or incremental coordinates, circular functions, hole rows, radius milling functions, etc. >> Operating instructions for digital display >> Coolant device To the machine : We offer a universal milling machine Deckel FP2 in good condition. The Deckel has very little crank play and all spindles can be moved easily. The machine has been completely dismantled and repainted. An oil change has been carried out. Mechanically and electrically tested. The digital display from K+C makes work easier and even more accurate. You also have a 1 year guarantee on the new digital display. Take the opportunity to inspect and try out the lids on site under power. The machine is available immediately. Rsdpfx Aou I Rm Nsguecb