Tool cutter

DECKEL FP2 Aktiv

Condition: excellent (used), Year of construction: 1979, functionality: fully functional, Universal milling machine Deckel FP2 with 3-axis active TNC 113 digital display Heidenhain and infinitely variable feed in TOP condition Technical data: >> Year of construction 1979 Machine no. 2202-10777 >> Rigid angle table (newly planed) >> Speed: 25 - 2500 rpm >> Feed stepless in 3 axes >> Rapid traverse in 3 axes >> Drive power .:2,2 KW >> Spindle brake >> Travel X/Y/Z: 400/220/400 mm >> Vertical milling head can be moved 150 mm on headstock >> Vertical quill and horizontal quill - SK40 extendable >> Tightening system S20x2 >> Weight approx. 1400 kg Accessories and equipment: >> 3 axes TNC 113 active digital display Heidenhain >> Coolant device >> Central lubrication To the machine : We are offering a Deckel FP2 universal milling machine in very good condition. The FP2 comes from a laboratory of a state-owned company where it was used very little. The machine has very little crank play and all spindles can be moved easily. The milling machine runs smoothly even at maximum speeds. On this newer FP2 model, the feed is infinitely variable in three axes, and the machine also has a rapid traverse for each axis. A major advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this machine on site under power. Kdedpjuc Ubwjfx Aadow

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, spindle bore: 95 mm, turning diameter: 930 mm, turning diameter over bed slide: 930 mm, turning diameter over top slide: 650 mm, turning length: 5,000 mm, total length: 8,500 mm, total width: 1,800 mm, total height: 1,800 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 8 rpm, overall weight: 8,000 kg, spindle mount: MK 6, The PORĘBA TPK-90/5M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: on stock available, under power, technical inspection anytime after appointment Technical data: - distance between centers/turning length: 5000 mm - turning diameter over bed: 930 mm - turning diameter over support: 650 mm - turning diameter in bridge recess: 1200 mm - power on compound slide - spindle bore diameter: 95 mm - maximum workpiece weight between centers: 6,000 kg - maximum workpiece weight between centers + 1 steady: 7,500 kg - maximum workpiece weight between centers + 2 steadies: 9,000 kg - number of spindle speeds: 21 Kdjdpewk Iq Eefx Aadjw - range of rotational speeds (rpm): 8 - 800 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.1 – 12,8 transverse: 0.05 – 6,4 - engine power: 16/22 kW (1st gear / 2nd gear) - overall dimensions: total length: 7500 mm width: 1800 mm height: 1800 mm total weight: 7300 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-600 mm, with rollers - MULTIFIX quick change tool post

Condition: reconditioned (used), Year of construction: 1984, Universal tool milling machine Make: DECKEL Model: FP 1 Active Year of manufacture: 1984 - overhauled, repainted, RAL7035 light gray / RAL7012 basalt gray RAL5008 gray-blue Mach. no.: 2101-1067 Milling head type: 2171 Milling head number: 1086 with guarantee geometric acceptance with test report Accessories: - 3-axis active digital display HEIDENHAIN TNC 113 with active function in X and Z axis - Fixed table 600 x 200 (T-slot: 12 mm) Kdsdpfx Aschfyfeadew - Vertical milling head SK 40 with tightening thread S 20 x 2 - Coolant system - Operating instructions - used as seen -

Condition: reconditioned (used), Year of construction: 1983, Universal tool milling machine Make: DECKEL Model: FP 2 Active Year of manufacture: 1983 - overhauled, repainted RAL7035 light gray / RAL7012 basalt gray RAL5008 gray-blue Mach. no.: 2202-10799 Milling head type: 2271 Milling head number: 300-1406 with guarantee geometric acceptance with test report Accessories: - 3-axis active digital display HEIDENHAIN TNC 111 - Fixed table 700 x 280 mm (T-slot: 12 mm) - Vertical milling head SK 40 with Kodpfxofzk Hfj Aadjdw Tightening thread S 20 x 2 - Central lubrication, manually operated - Coolant system - Operating instructions - Used, as seen -

Condition: excellent (used), Year of construction: 2016, XYZ 1550VS Gap Bed Centre Lathe EX Training College Machine 3 Jaw Chuck 2-axis Digital Readout Toolpost & Chuck Guard Footbrake (Modern Triumph 2000 size machine Manufactured & Installed 2016 Machine Capacity: Swing Over Bed 390mm Swing in Gap 610mm Swing Over Cross Slide 150mm Distance Between Centres 1250mm Cross Slide Travel 230mm Spindle: Kodpfx Aaoxn Sf Ssdsdw Spindle Speeds 20 – 2500rpm Spindle Power 5.75kW Spindle Bore 54mm Spindle Nose D1-6 For sale with Jet Machinery Ltd Jet Machinery Stock No: #79010 Machine Serial Number: 7715 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.