Used Diethei Md 100 M(Esslineal) for sale (78,358)

Year of construction: 2026, condition: new, The robust manual length stop MD 100 m enables you to efficiently increase the productivity and quality of your production. The operator can move the carriage to the desired position quickly and accurately. The specially developed clamping system gives the carriage a very high holding power. The length is measured using an easy-to-read tape measure with mm graduation. Existing machines / roller conveyors can be retrofitted at any time. Product Details: • suitable for striking steel profiles and solid materials • Trolley with 3 ball bearings • smooth-running for quick and precise length positioning • Manual stop clamping via large adjustable hand knob • specially developed clamping system with very high holding power • raise and lower manual arm • Measuring rail with measuring tape and reading beacon (resolution 0.10 mm) • Standard measurement lengths: 1m to 6m, maximum up to 20m • Total length of the system = measuring length + 0.3 m • Left or right hand versions available Dcodsidlpijpfx Abzoh • Mounting screws • Accesories: -Stop arm with spring damping -manual arm retraction via hand lever -Arm retraction with impact damping via pneumatic cylinder -various material roller conveyors

Year of construction: 2026, condition: new, With our manual length stop MD 50 m, we offer you an inexpensive length stop that is extremely easy to use in order to increase the productivity and quality of your production. It is quickly brought into position by the user and securely clamped there using a hand lever. The length is measured using an easy-to-read measuring tape with mm graduation and vernier. Existing machines / roller conveyors can be retrofitted at any time. Dcsdpjidln Ejfx Abzsh

Year of construction: 2026, condition: new, The robust manual length stop MD 100 d enables you to efficiently increase the productivity and quality of your production. The operator can move the carriage to the desired position quickly and accurately. The specially developed clamping system gives the carriage a very high holding power. The length measurements are taken via an easy-to-read digital display on the carriage. Existing machines / roller conveyors can be retrofitted at any time. Product Details: Dsdjidmppopfx Abzsch • suitable for striking steel profiles and solid materials • Trolley with 3 ball bearings • smooth-running for quick and precise length positioning • Manual stop clamping via large adjustable hand knob • specially developed clamping system with very high holding power. • raise and lower manual arm • digital position display with a resolution of 0.1 mm • Standard measurement lengths: 1m to 6m, maximum up to 20m • Total length of the system = measuring length + 0.3 m • Left or right hand versions available • Mounting screws • Accesories: -Stop arm with spring damping -manual arm retraction via hand lever -Arm retraction with impact damping via pneumatic cylinder -various material roller conveyors

Year of construction: 2026, condition: new, The manual length stop with hand wheel and electronic dimension display MD 100 h is ideal for frequently changing section lengths and for stopping long materials. It enables the carriage to be moved quickly and precisely using a hand crank. Existing machines / roller conveyors can be retrofitted at any time. Product Details: • Suitable for hitting steel profiles and solid materials • Hand wheel drive for the carriage • Pneumatic stop clamping with high holding power • digital actual length display in the working area Dcsdpfx Aboidmp Tozoh • Direct distance measurement via sensor / magnetic tape • Control with dimensional error compensation • Trolley with 3 ball bearings • raise and lower manual arm • Cable chain with steel storage tray • Standard measurement lengths: 1m to 6m, maximum up to 20m • Total length of the system = measuring length + 0.5 m • Left or right hand versions available • Mounting screws • Accesories: – Stop arm with spring damping – Arm retraction with impact damping via pneumatic cylinder – pneumatic arm raise / lower – Piece counter for the number of pieces/cuts made – various material roller conveyors

Year of construction: 2026, condition: new, The manual length stop with hand wheel and electronic dimension display MD 50 h is ideal for frequently changing section lengths and for stopping long materials. A hand crank enables the carriage to be moved quickly and precisely. Dcsdpfxsidln Ts Abzoh

Year of construction: 2026, condition: new, With our manual length stop MD 50 d, we offer you an inexpensive length stop that is extremely easy to use in order to increase the productivity and quality of your production. It is quickly brought into position by the user and securely clamped there using a hand lever. The length measurements are taken via an easy-to-read digital display on the carriage. Existing machines / roller conveyors can be retrofitted at any time. Dcedpfx Absidln Nozsh

Condition: new, mileage: 10 km, power: 75 kW (101.97 HP), fuel type: diesel, overall weight: 2,040 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Special equipment: Pre-installation for trailer coupling Cargo area package: 4 lashing eyes, cargo area lighting Worksite package Cargo floor and side walls made of wood Comfort Connect package with Multiflex cabin Dsdpfx Aoyz Hm Tobzjch Additional features: Passenger airbag, passenger airbag switchable, driver airbag, automatic headlight assist (Coming Home, Leaving Home), electrically adjustable and heated exterior mirrors, exterior mirrors with black covers, onboard computer, brake assist, rear parking assist, rear wing doors without windows, body/build: panel van, head airbag system, adjustable steering column (steering wheel), model update, engine 1.5 L - 75 kW Diesel FAP, payload 650 kg, electric parking brake, Peugeot Connect Box / SOS button (emergency call for vehicle location), wheelbase 2785 mm, tire pressure monitoring system, safety package, low emissions according to Euro 6e standard, gear shift indicator, Eco-LED headlights, right sliding door, SCR system (AdBlue technology), front side airbag, black side protection strips, seat cover/upholstery: Curitiba fabric, smartphone station, special paint Snow White / Kaolin White, start/stop system, automatic door unlocking (in case of accident) Errors, changes, and interim sales reserved. The equipment details listed in this advertisement do not represent guaranteed characteristics in the legal sense and serve solely for general information purposes. Binding specifications concerning features are exclusively part of the purchase contract.

Condition: good (used), Brother Exedra E-100 Mark II sewing machine, Foot Lifter FB II, MD-816B; You are purchasing an industrial sewing machine from Brother. Brother Exedra E-100 Mark II sewing machine, Foot Lifter FB II, MD-816B, DB2-B737-413 Dcedeu Nyuljpfx Abzeh 380V Find more items in our shop!

Condition: excellent (used), Year of construction: 2009, Horizon Brochure Production Line Collating Machines Horizon VAC 100a, VAC 100m Number of Stations: 2x10 Max. Format: 500 x 350 mm Min. Format: 148 x 120 mm Loading Capacity: 55 mm per station Speed: up to 9,500 cycles/h Weight: 320 kg per tower Dcsdpfxsyhzubo Abzsh Machine Dimensions: 810 x 652 x 1,961 mm Power Supply: 230 V, 10.6 A, 2.3 kW HORIZON ST-40 Stacking Table Specifications Max. Format: 350 x 500 mm Min. Format: 182 x 128 mm Paper Thickness: 52 – 208 g/m² Speed: up to 8,000 sets/h Stack Height: 360 mm Machine Dimensions: 1,353 x 652 x 1,027 mm (L x W x H) SPF 200A Stitch-Fold Station Infeed Format (4-page sheet): min. 180 x 105 mm, max. 508 x 356 mm Brochure Final Size: min. 85 x 105 mm, max. 250 x 356 mm Brochure Thickness: up to 25 sheets, 100 pages Speed: up to 4,800 cycles/h Weight: 782 kg (with FC-200A front trimmer) Machine Dimensions: 3,450 x 810 x 1,250 mm (L x W x H) Power Supply: 230 V, 5.3 A; 1.0 kW Trimmer: FC 200A Available from 05/2026.

Condition: new, MTS RH-M-0150M-D70-1-S2G6100 Temposonics position sensor R Series SN:02250398, unused in opened original packaging, 100% functional, scope of delivery as per photos Dcodpfoi Eb S Isx Abzoh

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 107500 € 2031.75 € 360 mm Ø360 x 40 mm 40 - 280 U/Min rund: 20 - 100 mm; quadra 60 mm 10 - 9999 mm 900 mm 15 kW 3400 mm 2675 mm 2750 mm 3450 kg Dcedpfxey Nnxgo Abzoh 21,65 kW Mass production in continuous operation is done by BMDO 100 XS when producing cut-off pieces of steel and non-ferrous metals with a material cross-section up to a diameter of 100 mm. BMDO 100 XS is designed to be used with TCT circular saw blade in order to cut solid bars in high speedand excellent precise. It is also suitable for HSS blades to cut tubes. With the Standard 800mm stroke servo feeding and 6 meters automatic loader. BMDO 100 XS is perfect for large-scale production of solid bars. STANDARD ACCESSORIES: automtic loader 6 m motorized roller table 3 mMikrospray Coolant Hydraulic Vice Inverter Control Panel Saw Blade Brush Cover Switch Heavy Duty Gearbox OPTIONAL EQUIPMENT (prices on request): mist filter 6 m roller table

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 25X100C718601A9B, warranty duration: 3 months, type of input current: AC, input voltage: 240 V, KEYENCE MD-X1000C 3-Axis Hybrid Laser Marker Industrial Engraver Etcher ( standard area/contactor) Model:MD-X1000C*1 Type: Marking unit (controller + head) 13W Standard area Marking method: XYZ 3-Axis simultaneous scanning method Marking laser: Type: YVO4 laser, Class 4 Laser Product (IEC60825-1, JIS C6802, FDA [CDRH] part 1040.10)*2 Wavelength: 1,064 nm Dcodpfx Aboy Uxxbjzjh Output: 13 W Q-switch frequency: CW (continuous wave), 1 to 400 kHz Guide laser/Working distance pointer: Semiconductor laser, wavelength: 655 nm, output: 1.0 mW, Class 2 Laser Product (IEC60825-1, JIS C6802, FDA [CDRH] part 1040.10)*2 Marking area: 125 x 125 x 42 mm Standard working distance: (±variable width): 189 mm (±21 mm) Marking resolution: 2 µm Scan speed: Max. 12,000 mm/s Character type: Font: KEYENCE original font (numbers, letters, katakana, hiragana, kanji), user font, TrueType font, OpenType font*3 Barcode:CODE39, ITF, 2of5, NW7 (CODABAR), JAN, CODE128, EAN, UPC-A, UPC-E 2D code:QR code, micro QR code, DataMatrix (ECC200/GS1 DataMatrix) GS1 DataBar: GS1 DataBar/GS1 DataBar CC-A/GS1 DataBar Stacked/GS1 DataBar Stacked CC-A/GS1 DataBar Limited/ GS1 DataBar Limited CC-A/GS1 DataBar Truncated/GS1 DataBar Truncated CC‐A Logo image: Custom character font and logo (CAD) data, BMP/JPEG/PNG/TIFF Marking conditions Workpiece style: Stationary marking, Moving marking (constant, encoder) Character size (marking height/width): 0.1 to 125 mm No. of registered programs: 2,000 max. No. of program blocks: 256 I/O (Input/output): Terminal block I/O, MIL connector I/O, contactor control I/O*4 Interface:RS-232C, USB 2.0, Ethernet (100BASE-TX/10BASE-T)*5 Head installation direction: All directions Head cable length: 4.3 ±0.1 m Cooling method: Forced air cooling Rated voltage and power consumption:100 to 120/200 to 240 VAC ±10 %, 50/60 Hz, 650 VA max. Environmental resistance Enclosure rating: IP64 (marking head) Pollution degree: 2 Overvoltage category: II Ambient temperature for storage: -10 to +60 °C (No freezing) Ambient temperature: 0 to +40 °C Ambient humidity for storage: 30 to 85 % RH (No condensation) Weight: Controller: 23.0 kg, Head: 13.6 kg, Console: 2.0 kg. *1 Type equipped with a contactor control terminal block. *2 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice. *3 The only TrueType and OpenType fonts supported are those fonts whose "Font embeddability" property is set to "Installable" or "Editable." This property can be viewed from the Properties dialog boxes of the fonts shown on the [Fonts] screen in [Control Panel]. *4 Supported models: MD-X1000C, MD-X1020C, MD-X1500C, MD-X1520C *5 There are two USB ports: a Type A connector for connecting USB memory devices or a USB mouse and a Type B connector that is the dedicated port for Marking Builder 3 (ActiveX). The Ethernet port supports communication with Marking Builder 3 (ActiveX), TCP/IP communication, EtherNet/IP™, and PROFINET.

Condition: good (used), Manufacturer: Haver & Boecker Type: Niagara MD 1000 x 2500 G Deck size: 1.000 x 2.500 mm Number of decks: 2 Included: – Frame Dsdsy A S T Ijpfx Abzech – Springs – 4KW Electrical Motor Vibrating screen can be sandblasted and painted.

Condition: new, Year of construction: 2026, machine/vehicle number: EAN0729389556525, total length: 71,000 mm, total height: 4,000 mm, clearance between the columns: 2,700 mm, shelf height: 4,000 mm, number of shelf rows: 7, load capacity: 6,000 kg, frame height: 4,000 mm, load per truss pair (max.): 3,000 kg, Pallet Racking System 4 m high, each bay with 2 beam levels (clear width 2700 mm) Scope of supply: 32 frames, 4 m high Dedsy E Nn Uepfx Abzsch 128 floor anchors 18 corner impact protectors 100 beams, 2.7 m long, 0.11 m high 150 mesh decks 89/110, load capacity 1000 kg 7 load capacity signs Delivery: free to site Frames bolted, not pre-assembled Freight / Delivery: - Maximum 20 working days after receipt of payment - Free delivery to site / assembly location - Unloading from the truck is carried out by the customer using their own lifting equipment - Delivery to anywhere in Germany except islands! Deliveries to EU countries are subject to individual agreement.

Condition: new, Year of construction: 2026, machine/vehicle number: EAN0729389556525, total length: 71,000 mm, total height: 4,000 mm, clearance between the columns: 2,700 mm, shelf height: 4,000 mm, number of shelf rows: 7, load capacity: 6,000 kg, frame height: 4,000 mm, load per truss pair (max.): 3,000 kg, Pallet Racking System 4 m high, each bay with 2 beam levels (clear width 2700 mm) Scope of supply: Dcedpfx Aoyyny Esbzeh 32 frames, 4 m high 128 floor anchors 18 corner impact protectors 100 beams, 2.7 m long, 0.11 m high 150 mesh decks 89/110, load capacity 1000 kg 7 load capacity signs Delivery: free to site Frames bolted, not pre-assembled Freight / Delivery: - Maximum 20 working days after receipt of payment - Free delivery to site / assembly location - Unloading from the truck is carried out by the customer using their own lifting equipment - Delivery to anywhere in Germany except islands! Deliveries to EU countries are subject to individual agreement.

Condition: ready for operation (used), For sale is an agitator motor from TMR with drive shaft. It is the model MD 5.5 / 1000 Product data: 1440 RpM 380/660 V Dcodpfx Abefwlz Ijzoh 5,5 kW 1520mm shaft length 3 kW

Condition: used, Automatic feed via Diethei PD 100 control For attachment on the right Max. insertion length: 2000 mm Dcedpfevurukox Abzoh Good condition

Condition: reconditioned (used), Year of construction: 2012, MAZAK QUICK TURN NEXUS 100-II M Max. machining diameter: 280 mm Max. machining length: 334 mm Max. spindle speed: 6,000 rpm Max. milling spindle speed: 4,500 rpm Max. bar diameter: 51 mm Machine is equipped with: Djdpjzav Ehofx Abzech - CNC control Mazatrol Matrix - KITAGAWA 3-jaw chuck BB-06, diameter 169 mm - Tool Eye - C-axis - Main spindle with bar capacity 51 mm - NC tailstock - Reinforced coolant pump - 8 pcs. fixed tool holders - 2 pcs. driven tool holders

Condition: used, Year of construction: 2019, Incl. tools CNC-CONTROLLED MACHINING CENTER morbidelli m100 Drilling and milling made for you! This numerically controlled machining center is equipped with a wide range of milling and drilling tools to meet every woodworking requirement. - Highly powerful - with 8,000 rpm drilling spindles and . technology, the most stable spindle available on the market, with more than 1,000 maintenance-free hours of use. - Optimally and comprehensively equipped - the vacuum cleaners can be individually configured with the TV FLEX work table to customize the machine to meet individual requirements. - Easy and understandable programming thanks to the integrated Cad-Cam MAESTRO CNC software - Easy to operate; the lowered machine frame makes the work table accessible at all times. The control cabinet and vacuum pump are integrated into the machine bed, and in the PRO SPACE version, no additional structural protective measures are necessary. Supporting structureThe supporting structure consists of a particularly strong monolithic steel base, ribbed and very robust. The particularly wide support was specifically designed to give the machine stability, ensuring constant precision in all working conditions. The machine does not need to be anchored to the ground. The base provides a large and solid support for the mobile column: the work unit is equipped with a balanced, stable and resistant support that can withstand the most extreme stresses, ensuring superior performance and greater precision. The mobile gantry consists of a solid single part anchored to the base and the work unit is fixed to it and moves along Y and Z axes, also on prismatic guides with ball return sliding blocks of the highest quality. The movement of the lower moving unit (X-axis) and the working unit along the crosshead of the moving unit (Y-axis) is achieved thanks to the power transmission via a rack and pinion with helical teeth; This creates a greater tooth-to-tooth thrust, which achieves greater acceleration and higher speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return, which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures very high quality finishing as vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters. These ensure:- Reduced machining times thanks to improved acceleration- Better positioning accuracy thanks to the high resolution encoder- Elimination of setup operations when switching on the machine thanks to absolute encoders- Elimination of general maintenance operations as there are no brushes with the "brushless" systemThe management of the axis displacement and in general of the working elements of the machine is done via e Dodpfx Abovvi Scozoch

Condition: used, Year of construction: 1973, x-travel 290 mm y-travel 170 mm z-travel 310 mm table surface area 600 x 215 mm spindle taper SK 40 spindle turning speed range 50 - 2500 U/min feeds 9 - 450 mm/min quill stroke 70 mm total power requirement 1,8 kW weight of the machine ca. 860 kg dimensions of machine L x W x H 1,06 x 1,05 x 1,33 m Accessories: vertical head with quill retraction, solid table, counter bearing, Djdpetqqn Refx Abzech coolant

Condition: used, Year of construction: 1999, x-travel 290 mm Dsdpjwngkrjfx Abzech y-travel 170 mm z-travel 310 mm table surface area 600 x 210 mm spindle taper SK 40 spindle turning speed range 50 - 2600 U/min feeds 9 - 450 mm/min quill stroke 70 mm total power requirement 5,5 kW weight of the machine ca. 720 kg - machine out of teaching shop - Accessories: solid table, vertical head with quill retraction, DRO on 3 axis HEIDENHAIN, various tool fixtures, coolant

Condition: used, Year of construction: 1990, Universal tool milling machine Make: MACMON Model: M 100 E Year of manufacture: 1990 – workshop tested Djdpfx Ajx Ada Rsbzoch Machine No.: 1479 Geometrical inspection with test protocol Accessories: - 3-axis digital readout K+C Arbah-M, new - Fixed table 600 x 210 mm (T-slot: 12 mm) - Vertical milling head SK 40 with draw thread S 20 x 2 - Coolant system - Operating manual Used as seen, without warranty The machine conforms technically to the state of the art at the year of manufacture.

Condition: used, functionality: fully functional, Year of construction: 1999, operating hours: 4,278 h, load capacity: 10,000 kg, lifting height: 5,400 mm, free lift: 1,710 mm, fuel type: diesel, mast type: triplex, construction height: 3,008 mm, fork length: 2,400 mm, drive type: Diesel, Diesel Forklift Mast Type: Triplex Transmission: Hydrostatic Condition: Ready for use and fully functional Technical Condition: Normal Front Tires Type: Solid Rubber Front Tires Condition: 60 - 80% Rear Tires Type: Super Elastic Rear Tires Condition: 60 - 80% Sideshift, Fork Positioner, Dsdjv R Nmcspfx Abzoch 3rd Valve, 4th Valve

Condition: used, functionality: fully functional, Year of construction: 2016, total length: 100 mm, total height: 100 mm, total width: 95 mm, overall weight: 570 kg, input voltage: 230 V, input current: 8 A, input frequency: 50 Hz, electrical fuse: 16 A, power: 1.7 kW (2.31 HP), We are offering this used EOS M 100 dental 3D printer, manufactured in 2016, for sale. Serial number: SI 2764 Wiring diagram number: 250000543 Year of manufacture: 2016 Voltage (1~/N/PE): 230 V Dcedsy Szv Ropfx Abzsh Voltage (2~/PE): 200–240 V Current consumption (1~/N/PE): 8 A Current consumption (2~/PE): 8 A Mains fuse rating (1~/N/PE): 16 A Mains fuse rating (2~/PE): 15 A Frequency (1~/N/PE): 50 Hz Frequency (2~/PE): 60 Hz Rated power: 1.7 kW Rated short-circuit current: 5 kA Total weight: 570 kg If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Używana klaryfikująca prasa filtracyjna produkcji Seitz Orion typ OF 100/150 w wykonaniu ze stali kwasoodpornej. Prasa posiada 154 płyty filtracyjne wykonane ze stali kwasoodpornej o wymiarach 1000 mm x 1000 mm, oraz dwie płyty końcowe. Powierzchnia filtracji ok 310 m2. Zamknięcie hydrauliczne. Prasa zamontowana na ramie ze stali KO. W zestawie z maszyną przyłącza podawania, manometry i lokalny panel sterowania. Dcjdpfx Abjyi Eygjzjh Specifications: Material: Stainless steel Plate Size: 1000 mm x 1000 mm # of Plates: 154 stainless steel filter plates Eyes: 4 Plate Type: Clarifying Surface Area: 310 m2 Closure: Hydraulic