Used Foseco Impeller for sale (269)

Condition: new, Radial fan impeller with backward-curved blades, designed to ensure high aerodynamic efficiency and pressure. RV 63-1120/1550AT. Steel coated with hard alloy. Bodpfx Aij Afdtgsrjdi

Condition: good (used), Year of construction: 2001, machine/vehicle number: 077359, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 380 V, input current: 22 A, input frequency: 50 Hz, volume flow: 7,500 m³/h, intake vacuum (max.): 30 mbar, suction capacity: 7,500 m³/h, intake manifold diameter: 300 mm, filter area: 36 m², noise level: 76 dB, actuation type: electric, total height: 4,000 mm, total length: 1,600 mm, total width: 2,250 mm, overall weight: 1,000 kg, year of last overhaul: 2025, Due to the purchase of new equipment to expand our machinery, this functional dust extraction unit is for sale. It can be inspected up to week 42; after that, we will dismantle it. Bodpfxjz Erfdj Airodi The impeller was replaced in October 2025 – a parts invoice is available.

Condition: used, Year of construction: 2001, operating hours: 18,250 h, functionality: fully functional, machine/vehicle number: 6097/01, type of input current: three-phase, total height: 2,000 mm, total width: 3,000 mm, total length: 5,000 mm, control cabinet height: 2,000 mm, control cabinet length: 800 mm, control cabinet width: 600 mm, input voltage: 380 V, temperature: 950 °C, control voltage: 220 V, input current: 30 A, input frequency: 50 Hz, overall weight: 2,500 kg, Equipment: documentation/manual, Morgan gas electric tilting aluminium oven type GE60, platform and Foseco rotor degasser. Year 2001 and 18400 operating hours. Bedpfjzhad Ajx Airsdi Melting capacity: 500kg aluminium Comes with 1 extra graphite crucible and stand.

Condition: used, Year of construction: 2018, machine/vehicle number: 18201655, Useful capacity: 105 L Total tank volume: 210 L Mother starter reserve: 31.5 L Tank made of AISI 304 stainless steel Submerged mixing impeller made of AISI 304 stainless steel Lid and outlet valve made of AISI 304 stainless steel Electronic control with screen and keyboard Maturation and preservation cycles Adjustable maturation temperature from 20 to 40 °C Adjustable preservation temperature from 4 to 20 °C Adjustable maturation time from 1 to 24 hours Integrated refrigeration unit Refrigerant: R134a High outlet for starter extraction Bjdpfx Ao Agn Icoirjdi Low outlet for complete draining Power supply: 400 V three-phase + neutral + earth Frequency: 50 Hz Electrical power: 3.6 kW Current: 9.6 A Dimensions (L x W x H): 680 x 1,165 x 1,614 mm Weight: 300 kg Year of manufacture: 2018 Key benefits Useful capacity of 105 L for the production of liquid starter 210 L tank made of AISI 304 stainless steel Programmable maturation and preservation cycles Submerged impeller for homogenizing the mixture Integrated refrigeration unit for thermal regulation Electronic control panel with display Preservation of a mother starter reserve after extraction Two outlets for sampling and draining Stainless steel lid with removable sealing gasket Made in France

Year of construction: 2003, condition: used, Manufacturer: GEA Process Engineering S.A.S. Model: Batch Formula Coaxial Manufacturer’s description: Food preparation tank Year of manufacture: 2023 Identification numbers: 2023/01 – 2023/02 – 2023/03 Machine type: Preparation vessel with high-shear mixer at the bottom of the vessel and coaxial mixing + scrapers Application: Food product preparation Function: Batch mixing, dispersion and emulsification Set - Quantity available: 3 identical units - Storage condition: disassembled, stored on the Osertech premises Tank specifications - Volume: 5,000 L - Useful volume: 3,000 L - Pressure: -1 / 3 barG - Temperature: 0–100°C - Jacketed : -1/5 barG; 145°C - Maximum dry matter content: 80 per cent - Maximum viscosity: 50,000 cP - Maximum powder feed rate: 100 kg/min - Material of parts in contact with the product: AISI 316L stainless steel - Tank bottom: high-speed agitator - Domed lid with manhole secured by knobs - CIP/NEP cleaning balls - Inspection window - Pressure gauge at the top Vacuum pump - Manufacturer: Busch - Model: LX 0330 C AM0 - Ultimate pressure: 33 mbar High-shear mixer - Rotor / stator - Power: 90 kW Bdodo Ahkz Uepfx Airei Coaxial agitation - Agitation unit manufacturer: PMS – Process Mixing Solutions - Scraper impeller with scrapers - Propeller shaft: 2 rows of propellers offset by 60° Gear motor 1 - Power: 11 kW at 1,465 rpm - Output speed: 21 rpm Gear motor 2 - Power: 9.2 kW at 1,470 rpm - Output speed: 53 rpm Requires a new electrical box (power/control). This request may be subject to a separate quotation.

Condition: refurbished (used), functionality: fully functional, power: 30 kW (40.79 HP), color: blue, overall weight: 674 kg, Year of construction: 2018, Submersible pump with helical turbine, suitable for pumping wastewater. The pump is mounted in a cathedral-type frame with base, discharge elbow, and equipped with a 20-meter power cable. The pumps have been overhauled. Two pumps are available for sale; the listed price is per unit. Bdjdpfxox Sdtrs Airji (See technical datasheet in the photos) Four-pole oil-bath motor allowing dry-running operation. Max flow rate: 490 m³/h Max head: 25 m Power supply: three-phase 400V Power: 30 kW

Year of construction: 2022, operating hours: 500 h, condition: used, functionality: fully functional, machine/vehicle number: Gogeim TA08 Nr 1400, Gogeim TA 08 shot blasting machine #1400. Completely overhauled in 2022, including replacement of the metal belt, impeller, loading mechanism, shot feed hoppers, power panel, and air cleaning unit. Bdedpfezy U Elox Airsi Operational time was less than one year.

Condition: good (used), Year of construction: 2020, functionality: fully functional, overall weight: 170 kg, total length: 705 mm, total width: 750 mm, total height: 1,800 mm, volume flow: 520 m³/h, operating pressure: 10 bar, pressure (max.): 10 bar, noise level: 78 dB, type of cooling: air, Equipment: type plate available, Little-used compressor (90% used for blowing air) from a model-making business for sale: V-belt-driven 2-cylinder unit with two-stage compression for 10 bar pressure, increasing performance and ensuring high efficiency. Tank with baked-on internal coating. 15-year warranty* on the tank against rust. Standard equipment includes all fittings: solenoid valve or pressure switch with relief valve for fully automatic operation, motor protection, safety valve, pressure gauge, check valve, condensate drain valve, and shut-off valve. Standard equipment includes rubber vibration dampers. Electrical connection 400 V/50 Hz (three-phase). Intercooler and aftercooler ensure rapid cooling of the generated compressed air. The low speed reduces vibrations, protects the compressor components, and reduces noise. Large fan impeller for optimum cooling. Easily accessible condensate drain under the tank. Also suitable for easy connection of a condensate drain line (Ecomat). Retrofitting of a refrigerant dryer is possible without any problems. Space-saving solution with a vertical tank. Technical data: Bdjdpfx As Agwf Noirsi Pressure: 10 bar Intake capacity: 660 l/min Speed: 1025 min-1 Tank volume: 270 l Weight: 170 kg Noise: 78 dB(A) Dimensions (W x D x H): 750x705x1800 mm Effective delivery rate: 520 l/min

Condition: excellent (used), Year of construction: 2017, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 2017.041.XM.400.004, space requirement length: 6,700 mm, space requirement width: 3,200 mm, space requirement height: 5,000 mm, This is a combination of a hot mixer and a cooler. A typical application is mixing polymers with additives. Bodpfxjzl Td Rj Airjdi Hot mixer: working volume of 400 liters, drive power 90 kW, mixing impeller with a tip speed of up to 60 m/s. Vacuum system included (but needs optimization). Filling hopper included. Gravimetric scales for the additives are not included in the delivery. Cooling mixer, volume 1200 liters with a 11 kW drive, cooling jacket for cold water flushing, outlet with a valve. The combination includes the entire steel structure with walkways, control cabinet with frequency converter (400 VAC/50Hz) for the variable drive of the hot mixer. Additional documents can be provided upon request. The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price is quoted without packaging on a pallet.

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: Ventilator VRZ 1120/63/3 WSN 180, power: 55 kW (74.78 HP), Radial industrial fan with a robust, welded sheet steel construction. Operational volume flow: 9.0017 m³/s; total pressure difference: 2001 Pa; shaft power: 20.8 kW. Bodpfx Aiszzaz Ioredi Low operating hours, as it was used exclusively for testing purposes. Very good condition. Very high brand quality: Zenner fan; consoles, impellers, and housing are fully welded; Küenle motor. Includes a set of vibration dampers, compensators with guide vanes on the pressure and suction sides; color: blue according to RAL 5015.

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, FLOW & THERMAL Regenerative Thermal Oxidizer (RTO), 18,000 Nm³/h (2021) Complete industrial system for the treatment of process water containing Volatile Organic Compounds (VOCs), consisting of stripping columns and a three-chamber Regenerative Thermal Oxidizer. Manufactured by Flow & Thermal Solutions / TECAM in 2021, the equipment was installed at a PET production plant and remained operational until the factory closed on 27 November 2025. The system removes VOCs from the water by means of air stripping and subsequently destroys them in the RTO through high-temperature thermal oxidation. Heat recovery through ceramic media helps reduce natural gas consumption. Main features • Manufacturer: Flow & Thermal Solutions / TECAM • Year: 2021 • Serial number: F002 • RTO nominal capacity: 18,000 Nm³/h • Configuration: three-chamber regenerative RTO • Fuel: natural gas • Honeywell / Eclipse TJ 200 burner • Burner output: 58–586 kW • Electrical supply: 400 V, 50 Hz • Electrical power stated on the nameplate: 40 kW • 30 kW Soler & Palau ATEX main fan • Siemens PLC automation with HMI touchscreen • LEL monitoring, purge, dilution, bypass and pneumatic valve systems • Vertical stack: 10 m high, diameter: 800 mm • CE marked Performance and operation The equipment operated at actual flow rates close to its nominal capacity, with recorded values ranging from approximately 16,400 to 17,900 Nm³/h. The latest available emissions test, carried out by DEKRA in December 2023, recorded the following values: • TOC: 13 mgC/Nm³ • NOx: 3–4 mg/Nm³ • CO: 125–153 mg/Nm³ During the tests, the equipment operated at an approximate temperature of 775–780 °C, with a treated water flow rate of 3.5 m³/h. Stripping columns The system includes: • Original stripping column, designed for approximately 6 m³/h. • Second Tecnium SLFKK9 stripping column, manufactured in PPH, with a nominal capacity of 8 m³/h and a maximum capacity of 10 m³/h. The second column was installed, but it is currently dismantled and lying on the ground after being knocked down by strong winds during the winter. It has a hole in the base which, according to the available information, is considered potentially repairable. The Tecnium column is equipped with internal packing, distributors, a mist eliminator, connections, drainage and provisions for integration with the existing control system. Bdodpfx Aiozvcknorsi Condition and maintenance The system remained operational until the final closure of the plant in November 2025. The latest preventive maintenance was carried out by TECAM in June 2025 and included mechanical and electrical inspection, burner, fans, stripping columns, instrumentation, valves and functional testing. The equipment was operational, although maintenance work is required before recommissioning, mainly involving: • Process valves • Internal insulation of the towers • Ductwork and seals • Main fan impeller and expansion joints • Repair of the base of the second stripping column TECAM technical documentation is available regarding the recommended works, and several spare parts are also available. Scope of supply The system includes: • Three-chamber RTO • Combustion chamber • Burner and gas train • Main fan • Two stripping columns • Dilution and purge system • Hot bypass • LEL analysers • Stack • Ductwork • Electrical cabinets and controls • Platforms, ladders and support structures • Available spare parts

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 2804221, functionality: fully functional, input frequency: 50 Hz, type of input current: three-phase, volume flow: 18,000 m³/h, suction capacity: 18,000 m³/h, filter area: 60.6 m², actuation type: electric, The EK-24 unit is a dust and chip extraction and filtration system for wood and wood-based material processing. The unit is manufactured by the Polish company Euro-Komplex, which specializes in the design, production, and installation of comprehensive dust extraction systems used in various industries, particularly in woodworking and furniture factories. The filter effectively removes contaminants from multiple machines simultaneously, such as circular saws, panel saws, four-sided planers, veneer coating machines, CNC machines, milling plotters, and sanders. Technical specifications: • Airflow: 18,000 m³/h • Filtration area: 60.6 m² • Number of filters: 48 pcs / 2000mm / 200mm • Electrovibrator: 0.09 kW x 2 • Control cabinet with frequency converter Bedpfx Aiozba E Ierjdi • WTK fan • Air lock • Dry fire tube The filter's robust and solid construction is made of hot-dip galvanized or powder-coated steel with a thickness of 2mm, and the inlet tunnel and reinforcements are made of 3mm steel. The structural elements are fastened with 8.8 screws with Teflon inserts. It is worth noting that the filter basket used is uniform and smooth, without welded elements, which facilitates airflow with waste fractions without depositing them on the basket walls. The EK-24 is equipped with an 0.09 kW electrovibrator in an ATEX system, used to clean the filter bags made of antistatic and waterproof material with a weight of 350g/m² and an air permeability of 240l/dm²/min. The cleaning system is fully automated and operates in appropriately selected time cycles adapted to the type of dust being extracted. Thanks to the use of an air return lock (summer/winter flap), in winter, the cleaned and filtered air returns to the production hall, which has a very beneficial effect on maintaining the appropriate temperature and provides measurable financial benefits. The WTK fans used in the EK-24 have self-cleaning impellers and a reinforced design, which guarantees stable operation for a long time. Electrical control is carried out using a control unit equipped with protection and a time control system for the electrovibrator and the fan motor. The control cabinet is equipped with a frequency converter, which enables the adjustment of the fan motor speed and provides very precise control. The air lock is used to separate the filter zone from the external zone. It blocks the airflow, allowing only wood chips to pass through, so they fall freely into the bag without an air blast. The air lock is equipped with a system that mitigates the impact of the impeller in case a large solid object enters the unit. It is equipped with a dry fire tube mounted on the filter, used to quickly supply water or extinguishing agent to the closed filter chamber using internal sprinklers. The installation is equipped with a fire brigade connection necessary to connect fire department equipment or a hose directly from a fire hydrant. The filter also has a pressure relief device, which lowers the pressure in the event of an explosion. It is designed to relieve an explosion developing inside a protected device, such as hoppers, silos, separators, filters, sorters, etc., where an explosion hazard exists. By releasing the explosion into the environment, the explosion pressure is reduced to a value below the allowable pressure resistance of the protected device.

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 376292, The Reitz KXE 250-050030-00 is an industrial centrifugal fan designed to generate a high total pressure increase in process installations. The assembly consists of a volute fan casing, an impeller mounted on a separately supported shaft, a coupled electric motor, and a common steel base frame with vibration-isolating mounts. The KXE design is suitable for moving air and process gases in systems requiring high flow rates and pressure. This unit was manufactured in 2020 for a rated volume flow of 500 m³/min and a total pressure increase of 2500 daPa. At its operating point, it delivers 602.4 m³/min at 1862 daPa and 3033 rpm. The shaft is supported by two 6318 bearings lubricated with Shell Gadus S2 V100 2 grease. Manufacturer: Konrad Reitz Ventilatoren GmbH & Co. KG Type: KXE 250-050030-00 Product type: industrial centrifugal fan Serial number: 376292 Year of manufacture: 2020 Material number: 10466442 Measurement category: C Efficiency grade: N61 Target efficiency grade value: 64.5 Rated inlet temperature: 20°C Operating-point inlet temperature: 40°C Rated inlet medium density: 1.205 kg/m³ Operating-point inlet medium density: 0.93 kg/m³ Rated volume flow: 500 m³/min Operating-point volume flow: 602.4 m³/min Rated total-pressure increase: 2500 daPa Operating-point total-pressure increase: 1862 daPa Optimum efficiency: 76.3% Rated shaft power: 256.57 kW Operating-point shaft power: 231.1 kW Rated rotational speed: 2980 rpm Operating-point rotational speed: 3033 rpm Maximum rotational speed: 3159 rpm Maximum medium temperature: 80°C Bdsdpozw Ucxjfx Airji Drive-end bearing: 6318 Non-drive-end bearing: 6318 Lubricant: Shell Gadus S2 V100 2 Initial relubrication interval: 2460 operating hours Subsequent relubrication interval: every 2460 operating hours Grease quantity per bearing: 132 g Conformity marking: CE

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 376295, The Reitz KXE 250-050030-00 is an industrial centrifugal fan designed to generate a high total pressure increase in process installations. The assembly consists of a volute fan casing, an impeller mounted on a separately supported shaft, a coupled electric motor, and a common steel base frame with vibration-isolating mounts. The KXE design is suitable for moving air and process gases in systems requiring high flow rates and pressure. This unit was manufactured in 2020 for a rated volume flow of 500 m³/min and a total pressure increase of 2500 daPa. At its operating point, it delivers 602.4 m³/min at 1862 daPa and 3033 rpm. The shaft is supported by two 6318 bearings lubricated with Shell Gadus S2 V100 2 grease. Manufacturer: Konrad Reitz Ventilatoren GmbH & Co. KG Type: KXE 250-050030-00 Product type: industrial centrifugal fan Serial number: 376295 Year of manufacture: 2020 Material number: 10466442 Measurement category: C Efficiency grade: N61 Target efficiency grade value: 64.5 Rated inlet temperature: 20°C Operating-point inlet temperature: 40°C Bdodpfx Ajzw Ug Reirji Rated inlet medium density: 1.205 kg/m³ Operating-point inlet medium density: 0.93 kg/m³ Rated volume flow: 500 m³/min Operating-point volume flow: 602.4 m³/min Rated total pressure increase: 2500 daPa Operating-point total pressure increase: 1862 daPa Optimum efficiency: 76.3% Rated shaft power: 256.57 kW Operating-point shaft power: 231.1 kW Rated rotational speed: 2980 rpm Operating-point rotational speed: 3033 rpm Maximum rotational speed: 3159 rpm Maximum medium temperature: 80°C Drive-end bearing: 6318 Non-drive-end bearing: 6318 Lubricant: Shell Gadus S2 V100 2 Initial relubrication interval: 2460 operating hours Subsequent relubrication interval: every 2460 operating hours Grease quantity per bearing: 132 g Conformity marking: CE

Condition: used, mileage: 1,56,461 km, power: 159 kW (216.18 HP), first registration: 10/1987, overall weight: 12,000 kg, fuel type: diesel, color: red, axle configuration: 2 axles, gearing type: mechanical, Year of construction: 1987, total length: 7,100 mm, total width: 2,500 mm, total height: 3,150 mm, Equipment: ABS, all wheel drive, Very well-maintained water tender LF 20 Superstructure by Rosenbauer with rear-mounted Rosenbauer R280N pump with high-pressure unit, 2800 l/min at 10 bar, 250 l/min at 40 bar. The pump was completely overhauled in 2015 (seals, impellers, guide vanes, bearings, etc.) Bdedpfx Aisz Amnkjrei According to the previous owner, the fire department, the pressure and pumping performance is like new. +++ Water tank 1800 l + 200 l foam tank +++ Special signals with Martin horn, fully functional, good tires 10 R x 22.5, DOT 4412 Chassis MB 1222 with 4x4 all-wheel drive and 2x differential lock, center and rear Rockinger trailer hitch, 13 t towing capacity, braked Includes hose reel at the rear (not shown) Fully operational, units and axles are dry Superstructure dimensions: 380 x 2450 x 1700 mm (L x W x H) Superstructure with 2 roof storage compartments and rear ladder New main inspection (TÜV) valid at the time of delivery +++ Errors, changes and prior sale are subject to change +++

Year of construction: 1990, condition: excellent (used), functionality: fully functional, KOJA radial fan 200kW 110.000m3 exhaust blower /ct1789/ KOJA Electrical power: 200kW, 50Hz Year of manufacture: 1990 Impeller diameter: 1200mm Impeller material: Operating pressure: 2.94kPa -- (300 water mm) Capacity: 100.000m3/h -- m3/s -- 1050kg/h Transportable particle: 0,5 - 15mm -- 20-25kg/m3 Overall dimensions: Height 2500 x width:2000 x length:3000mm Weight:4400kg Bdsdpfxowin Eas Airei If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible

Year of construction: 2018, operating hours: 10 h, condition: good (used), functionality: fully functional, Subject: RZ125-315 pump with diffuser, impeller for water with blades - Pump operating parameters: Q = 80-150 m³/h H = 14.7-12.5 m - Material: cast iron, grade ŻL250 - Sealing: rope seal Bsdpfx Aieztxvnerjdi - With 3SIE160L-6 motor, 11 kW, 960 rpm, 400V 2. Quantity: 2 pcs.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, overall weight: 260 kg, total length: 1,140 mm, total width: 450 mm, total height: 525 mm, volume flow: 14.5 m³/h, final pressure: 2.2 bar, power: 4 kW (5.44 HP), input voltage: 400 V, input frequency: 50 Hz, rotational speed (max.): 1,440 rpm, protection type (IP code): IP56, 2 units of horizontal, radially split volute casing pumps in process design, with single-inlet, single-stage radial impellers. ! Price per unit ! Manufacturer: KSB Model: CPKN-C3.1 040-250 Year of manufacture: 2009 Shaft seal: Double-acting Burgmann mechanical seal with flushing water connection and flow meter Impeller diameter: 260 mm Pump speed: 1440 rpm Please note: The nameplate indicates the parameters from the last duty point, not the pump’s design (best efficiency) point! Best efficiency point according to curve: Flow rate: 14.5 m³/h Head: 22 meters (2.2 bar) Shaft power: 1.85 kW Efficiency: 46.1 % NPSH: 1 m Duty point from last application: Flow rate: 6.0 m³/h Head: 24.0 meters Shaft power: 1.36 kW Efficiency: 30 % NPSH: 0.8 m Materials: Volute casing: Noridur 1.4593 Casing cover: Noridur 1.4593 Shaft: C 45+N Impeller: Noridur 1.4593 Bdodpfxoxp Eqkj Airsi Other wetted parts: 1.4517 Electric motor: 4.0 kW Energy efficiency: IE1 Voltage: 400/690 V Speed: 1440 rpm Material 1.4593 Noridur is ideally suited for: - Chemical and process engineering industries - Sulfuric and phosphoric acid - Salt production and processing - Petrochemical industry - Coke plants - Textile and pulp industries - Food and sugar industries - Mining/coal extraction and handling - Flue gas desulfurization plants - Acidic, chloride-containing wash suspensions - Acidic process water - Wastewater treatment plants - Offshore and marine applications ! Price per unit !

Condition: used, Year of construction: 2004, used fan year of manufacture: 2004 with electric motor, 1400 rpm, 11 kW design B 3 V-belt drive Bedoz Svq Ejpfx Airodi with motor tensioning rails steel impeller, forward-curved, mounted on double flange bearings housing in welded construction with suction and discharge nozzles suction diameter 250 mm availability: short notice location: Flörsheim

Condition: used, Metering rotary valve, rotary valve, metering valve, rotary valve for screw conveyor, screw conveyor, screw conveyor, conveyor technology, screw conveyor -Impeller: for cellular wheel sluice, 8-wing -Cell wheel: Ø 200 x 220 mm, dimensions see photos -Total dimensions: 625/200/H200 mm -Weight: 12.1 kg Bjdpfxel A Azco Airodi

Condition: used, mileage: 6,11,020 km, power: 213 kW (289.60 HP), first registration: 11/2007, fuel type: diesel, empty load weight: 7,730 kg, maximum load weight: 7,200 kg, overall weight: 14,950 kg, axle configuration: 2 axles, brakes: engine braking, color: white, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: steel-air, number of seats: 2, Equipment: ABS, differential lock, Manufacturer: Mercedes Benz - Type/Model: Atego 1529 Insulated - Impeller system - First registration: 23.11.2007 - Mileage: 611,020 km - Number of axles: 2 - Emission class: Euro 5 - Cab: M - Transmission: Manual gearbox - Auxiliary brake: Engine brake - Suspension: Leaf spring/air suspension - Brake: Disc brake - Length: 6750 mm - Width: 2500 mm - Height: 0 mm - Unladen weight: 7730 kg - Body manufacturer: Acram - Tank material: Stainless steel - Total tank volume: 7500 L - Number of tank compartments: 3 - Insulated - System designation: Schwarte impeller suction and metering system - Impeller pump - Ultrakust MAK 3002 - Sampling - CIP cleaning Bedezd Ecijpfx Airjdi

Condition: used, Year of construction: 2026, MDC1500/400 Metal Chip Extractor The MDC1500/400 metal chip extractor is an industrial machine designed for intensive use at grinding and welding stations, as well as wherever effective removal of metal chips and dust is required. This model provides high extraction performance, stable airflow and filtration adapted to the demanding conditions typical of metal production and processing. Key Advantages Two-stage filtration – quick, tool-free replacement of the two filter cartridges improves chip separation efficiency. High extraction performance – up to 2,200 m³/h without a bag, ensuring stable operation even when handling large quantities of metal chips. Mobile design – the compact wheeled housing makes it easy to move the unit between workstations. Large collection container – extends operating time without the need for frequent emptying. Dual suction inlet, 2 × 100 mm – allows two machines to be connected simultaneously. Design and Technology The MDC1500/400 is equipped with a high-performance motor operating at S1 100%: 1.5 kW and S6 40%: 2.1 kW, ensuring stable extraction performance even during extended operation. The 400 V / 50 Hz power supply provides reliable operation and consistent impeller performance. The dual-inlet system, 2 × 100 mm, enables efficient extraction from two sources. The optimised suction system design allows an airflow rate of up to 2,200 m³/h without a bag. When operating with a bag or hose, the extraction capacity is 1,500 m³/h, which is still fully sufficient for workstations generating large quantities of metal dust and chips. Precision and Performance The MDC1500/400 metal chip extractor has been developed to maintain a stable, linear airflow. Its robust housing minimises vibrations, while the precisely designed filtration system ensures optimal capture of dust generated during grinding, deburring and welding. As a result, the unit effectively helps keep the workstation clean and improves the working conditions for the operator. Applications The MDC1500/400 is a versatile, professional extraction unit for grinders and machining workstations operating in continuous-duty conditions. It is ideally suited for: grinding tables, welding tables, bench, belt and disc grinders, manual and mechanical processing workstations where metal chips and swarf are generated. Standard Equipment two filter cartridges, large container for metal chips and swarf, compact and mobile housing, dual suction inlet, 2 × 100 mm. Technical Data Parameter Specification Bdjdpfx Ae Afnrmoiroi Motor S1 100%: 1.5 kW; S6 40%: 2.1 kW Voltage 400 V / 50 Hz Suction inlets 2 × 100 mm Extraction capacity without bag 2,200 m³/h Extraction capacity with bag/hose 1,500 m³/h Dimensions 850 × 670 × 765 mm Weight 72 kg PLEASE NOTE!!! This machine is a returned item; it is second-hand, has dirty filters and experiences vibrations due to the turbine being out of balance. NO WARRANTY AND NO RETURNS!

Year of construction: 1990, condition: excellent (used), Production: KOJA Year of manufacture: 1990 Power: 200kW, 370A RPM: 1485 rpm Air delivery: approx. 100,000 m3/hour Suction side: diameter 800mm Pressing side: 800 x 620mm Impeller diameter: 1800mm Housing dimensions: 3400x3100x2400 Net weight with engine: approx. 4.5t Aerodynamic control with inlet guide vane, grease-lubricated anti-friction bearings. Bedpfx Asrgqm Hsiredi The machine can be disassembled and transported with a standard truck.

Year of construction: 2021, condition: excellent (used), functionality: fully functional, machine/vehicle number: C115101, Four CSF Inox (Italy) hygienic centrifugal pumps, year 2021, professionally decommissioned from an INEOS production facility by qualified engineers. In service for under 12 months — excellent, near-new condition. Four pumps available across three models: 1 x CS 32-110-2-1/BD — 0.75 kW, 1–12 m³/h at 1.6 bar, 1.5" tri-clamp Bodpfx Ajzmt Ufjirsdi 2 x CS 32-145-2-1.5/BD — 1.1 kW, 1–13 m³/h at 2 bar, 1.5" tri-clamp 1 x CS 50-175-2-10/BD — 7.5 kW, 1–54 m³/h at 4.1 bar, 2.5" inlet / 2" outlet tri-clamp All units: 316L stainless steel, 6-vane open impeller, EHEDG/3A hygienic design. ATEX pump II 3G Ex h IIB T4...T3 Gc with Orange1 Ex db IIC T4 Gb flameproof motors, IP66, inverter duty. Suitable for solvent, fragrance, cosmetics, food, beverage and pharmaceutical duties in hazardous areas. Available individually or as a set. Tracht Ltd supplies hygienic and sanitary process equipment. Viewings by appointment; collection and delivery can be arranged. Sold EXW Manchester, UK. Price on request. Please send an enquiry for individual quotes or a package price for the full set — we respond quickly.

Condition: used, Year of construction: 2026, functionality: fully functional, CORMAK FM350 Dust Collector – Industrial Sawdust and Chip Extraction System The CORMAK FM350 is an industrial-grade dust extraction system designed for efficient and reliable removal of sawdust, chips, and fine particles in professional woodworking facilities. Thanks to its powerful suction performance, large-capacity collection bags, and the ability to connect up to four woodworking machines simultaneously, the FM350 provides effective dust control even in demanding production environments. Key advantages Powerful 3.8 kW motor (400 V) – ensures reliable continuous operation in industrial conditions. High airflow capacity of 4,860 m³/h – efficiently removes large volumes of sawdust and wood chips. Heavy-duty metal centrifugal fan – durable steel impeller provides quiet, vibration-free operation. Robust steel construction – powder-coated finish protects against corrosion and mechanical damage. Adjustable leveling feet – allow precise positioning even on uneven floors. Bdode Afnk Nspfx Airoi Six 200 L collection bags – large waste capacity reduces the frequency of emptying. Quick bag replacement system – steel clamps enable tool-free and fast bag removal. Connection for up to four machines – suction manifold with 1 × Ø180 mm and 4 × Ø100 mm outlets provides flexible installation options. Construction and technology The CORMAK FM350 is equipped with a durable steel centrifugal fan and a reinforced support structure designed for intensive industrial operation. High-quality components ensure resistance to overloads and long-term reliability. The modern bag mounting system allows quick maintenance and convenient replacement of filtration and collection bags. Precision and performance Thanks to large-surface fabric filter bags and high suction pressure, the CORMAK FM350 dust extractor provides excellent working conditions even during heavy-duty woodworking operations. Effective dust removal improves air quality, increases operator comfort, and contributes to a safer production environment. Applications The CORMAK FM350 is designed for: wood processing plants – extraction from saws, planers, routers, and other woodworking machines professional carpentry workshops requiring multi-machine extraction technical schools and training facilities large industrial halls requiring a high-capacity sawdust extraction system Standard equipment 3 fabric filter bags 3 fabric collection bags Suction manifold: 1 × Ø180 mm / 4 × Ø100 mm Optional equipment Galvanized hose clamps 3-micron filter cartridge Technical specifications Parameter Value Extraction capacity 4,860 m³/h Collection bag volume 3 × 200 L Number of bags 6 Suction connections 1 × Ø180 mm, 4 × Ø100 mm Dimensions (L × W × H) 2355 × 590 × 2150 mm Weight 125 kg Motor power 3.8 kW Power supply 400 V / 3-phase PLEASE NOTE!!!! This machine is a returned item; it comes without its original packaging or splitter. NO WARRANTY AND NO RETURNS!