Used Eifel Tb2A276 for sale (15)

Condition: used, Year of construction: 1983, machine/vehicle number: 5706, weight max. in kg:250 kg Ksdscxxwhepfx Afpslt dimensions:750 x 1400 mm weight:1850 kg stroke:6000 mm total power requirement:4 kW dimensions of the machine ca.:1,63 x 1,50 x 2,60 m mobile hydraulic lifter, electric drive, 4x mast, lifting height approx. 8 m

Condition: good (used), Year of construction: 1980, Spinning machine Klsdpjx Ttplofx Afpet LEIFELD Spinning moulds

Condition: good (used), Year of construction: 1980, center width: 2,350 mm, center height: 1,200 mm, product height (max.): 6 mm, Manufacturer: LEIFELD Type: PLB 1200 Year of construction: 1980 Specifications: Metric Metric US Standard Max. Product over bed 1200 Max. Product in the pit 2260 Ø Center height above the bed 600 mm Distance between the centers 2350 mm Length of the gap Kledpfoq Dqdisx Afpjt 400 mm Max. Sheet thickness 6 mm Stroke X-Axis 1200 mm Stroke Y-axis 300 mm rotational speed 6 - 675 rpm Power output 40 kW Tailstock quill 750 mm Dimensions (estimate) length 4500 mm width 3200 mm height 2500 mm weight 10200 kg Please note: The information on this page is given in good faith and to the best of our knowledge and belief, and where possible obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: good (used), Year of construction: 1970, center width: 2,350 mm, center height: 2,400 mm, Max. blank / workpiece over bed:2400 Centre height over bed: 1200mm Distance between centers: 2350mm Length of the gap: 400mm Maximum sheet thickness: 6mm Stroke X-Axis: 1200mm Stroke Y-Axis: 300mm Speedrange: 6 - 675Rpm Power: 40kW Klsdpjxtaxwsfx Afpst Stroke pinole quill: 1200mm Length: 4500mm Width: 3200mm Height: 2500mm Weight: 10200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1979, functionality: fully functional, center width: 2,840 mm, center height: 1,200 mm, center height in crank: 1,700 mm, spindle motor power: 28 W, spindle speed (min.): 5 rpm, spindle speed (max.): 540 rpm, quill stroke: 750 mm, feed force X-axis: 75 N, feed force Z-axis: 110 N, workpiece weight (max.): 3,000 kg, input voltage: 400 V, The machine is in good condition; the control cabinet was replaced 10 years ago. The machine is currently disassembled and stored in the warehouse. If required, we can install the machine and provide training. Kjdpfx Asy S A Tdjfpslt

Condition: good (used), Working diameter Ø 2400mm Klodpoucdh Tjfx Afpst Max sheet thickness: 9,5 mm

Year of construction: 2024, operating hours: 960 h, condition: used, functionality: fully functional, Crusher and Screening Machine Kodpfx Afeytdgaepelt Year of manufacture: 2024 Location: 54611 Hallschlag Application: Designed for the reduction of charcoal undersize material, followed by screening and filling into big bags or, alternatively, pneumatic conveying into silos. The smooth roller mill was originally used for the size reduction of clay. These machines offer a wide range of applications and are capable of handling and processing various materials. Plant components: 1. Screw conveyor 1 2. Screw conveyor 2 3. Screw conveyor 3 4. Crusher (smooth roller mill) and steel frame 5. Tumbler screen and steel frame 6. Elevator 1-3 7. Pneumatic conveyor vessel (“sand sender”) 8. Big bag unloading station 9. Piping for extraction/ventilation 10. Electrical/electronic systems in a container The prices listed in the document reflect our acquisition costs. Individual or complete purchase of components is possible. Prices and further technical details available on request.

Year of construction: 1986, condition: ready for operation (used), Output: 90-120/h, keg dimensions: 365-570x355-650mm, with instruction manual and layout. Kljdpfx Ashp N Ucofpst

Condition: ready for operation (used), Year of construction: 1988, A complete beer keg cleaning and filling system Leifeld + Lemke, today IW-Anlagentechnik, is available. Throughput capacity: approx. 120kegs/h, keg/barrel formats: 20l/30l/50l, control system: Siemens S7, control system retrofit: 2008. 1) Keg exterior cleaning machine Schöttiger + Schäfer KHAH 240, max. cleaning capacity: 240kegs/h, operating cleaning capacity: 140kegs/h, drive rollers: 2, transfer rollers infeed/outfeed: 1/1. 2) Keg pre-cleaning machine Leifeld + Lemke KVR 300, year of manufacture: 1988, max. washing capacity: 180kegs/h, operating washing capacity: 120kegs/h, design: stainless steel, process: centering, residual emptying with air purging, mixed water pre-cleaning, waiting and soaking station, caustic cleaning and pre-filling. 3) Keg main cleaning and filling machine Leifeld + Lemke KFR 401, year of manufacture: 1988, filling line capacity: 60kegs/h, design: stainless steel, process: centering, internal cleaning station, 2x sterilization stations, filling process preparation, filling station, waiting station. 4) CIP cleaning station for kegs, max. cleaning capacity: 180kegs/h, cleaning agent tanks: 5, tank volume: 650l, tank contents: caustic 1/caustic 2/acid/hot water/mixed water. Furthermore, the system includes the complete pallet conveyor, keg conveyor and a Kuka robot for depalletizing and palletizing of the kegs. Documentation available. On-site inspection is possible. Klodpfxjycigko Afpjt

Condition: good (used), Year of construction: 1987, functionality: fully functional, center width: 825 mm, center height: 350 mm, spindle motor power: 7,500 W, total length: 2,800 mm, spindle speed (min.): 300 rpm, spindle speed (max.): 2,500 rpm, quill diameter: 60 mm, quill stroke: 500 mm, total height: 2,200 mm, total width: 2,000 mm, overall weight: 3,500 kg, product height (max.): 3 mm, feed force X-axis: 2,800 N, feed force Z-axis: 2,800 N, feed length X-axis: 250 mm, feed length Z-axis: 450 mm, feed rate X-axis: 6 m/min, feed rate Z-axis: 6 m/min, The machine is located in our warehouse. It is connected and can be tested at any time. Kljdpfxexfiq Hj Afpjt

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, center width: 1,400 mm, center height: 400 mm, spindle motor power: 3,000 W, total length: 2,400 mm, spindle speed (min.): 100 rpm, spindle speed (max.): 1,200 rpm, Manual spinning machine make Leifeld Type Plb 300 License plate - Powerful, solid machine - Very good technical machine condition - All functions checked - Electrical controls and operating buttons new - Motor and belt drive new Klodovcfhmopfx Afpst - New paint finish - green Technical data Center height mm 400 Center width mm 1400 Machine bed with offset + bridge mm 200 deep / 350 wide Machine length mm 2400 Spindle motor kW 3 4-speed gearbox Speeds - infinitely variable approx. 1/min 100 - 1200 Spindle holder M 64 Manual steel support - length mm 450 Tailstock - stroke mm 280 Quill - fine adjustment Morse taper MK 3 Machine weight approx. kg 1200 Special equipment built into the machine - Center height mm 400 - Center width mm 1400 - M-bed with crank + bridge mm 200 deep / 350 wide - Morse taper MK 3 - Stepless spindle speeds in the indexing steps due to frequency-controlled drive motor - Multi-plate clutch and brake - Hollow bored main spindle - Electrical switching Additional equipment - on request - Manual cross support PS 30 / 300 - Cut-off device

Condition: ready for operation (used), Year of construction: 1976, functionality: fully functional, center width: 800 mm, center height: 350 mm, spindle motor power: 4,000 W, total length: 21,000 mm, spindle speed (min.): 200 rpm, spindle speed (max.): 1,000 rpm, overall weight: 1,100 kg, input voltage: 380 V, power: 4 kW (5.44 HP), type of input current: three-phase, Hand-operated pressing machine Manufacturer: Leifeld Type: Plb 300 - High-performance, robust machine - Excellent technical condition - All functions tested - New electrical system and push-button controls - Newly painted Technical Data Kodjxp Sb Aopfx Afpjlt Centre height: mm 350 Centre distance: mm 800 Machine length: mm 2100 Spindle motor: kW 4.0 4-speed gearbox Speeds: approx. rpm 200 – 1000 Spindle mount: M60 DIN 800 Manual tool rest Tailstock stroke: mm 280 Precise fine adjustment on tailstock quill Morse taper: MT 3 Machine weight: approx. kg 1100 Special equipment integrated in the machine: - Centre height mm 350 - Ball bearing live centre MT 3 - Stepless spindle speed adjustment within gearbox ranges using frequency-controlled drive motor - Electrical system - Oil circulation lubrication On request: - Cross slide PS30/300

Condition: new, Year of construction: 2025, operating hours: 100 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, rapid traverse X-axis: 42 m/min, rapid traverse Y-axis: 42 m/min, rapid traverse Z-axis: 42 m/min, nominal power (apparent): 25 kVA, torque: 135 Nm, controller manufacturer: Siemens, controller model: 828D, workpiece weight (max.): 600 kg, total height: 3,000 mm, total length: 2,600 mm, total width: 2,310 mm, table width: 1,000 mm, table length: 550 mm, table load: 600 kg, overall weight: 5,000 kg, spindle speed (min.): 1 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 10 h, coolant supply: 30 bar, spindle motor power: 19,000 W, spindle nose: HSK63A, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: AC, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Vertical Machining Center VM800 - Demonstration Machine - Technical specifications: Control unit: Siemens 828D Milling spindle 12,000 rpm, HSK63 Internal coolant supply (IKZ) 30 bar Bed flushing Renishaw OMP60 touch probe (Heidenhain available on request) Renishaw TS27R tool measurement (Heidenhain or BLUM available on request) Direct measuring systems in X, Y, Z axes by Heidenhain Rotating inspection window SPINVISTA (Black Edition) Automatic door Robot interface Automatic power-off function Automatic tool changer (30 positions, HSK63) Klodpjyr A T Ajfx Afpet Centralized automatic lubrication system Telescopic way covers Electronic handwheel for manual operation Signal lamp Machine operating manual Pneumatic air gun Water gun Air blow gun Chip conveyor Coolant tank 286L This and other machines from GEWA Werkzeugmaschinen GmbH are available for viewing at our facility in the Eifel region.

Condition: good (used), Manufacturer: Plastik-Maschinenbau GmbH (PM) Model: PM Wiska 30-25 D Serial No.: M0793 Made in: West Germany (Kelberg / Eifel) Kljdjxu E E Sepfx Afpst Type: Single-screw plastic extruder Documentation: Included (original German manual and correspondence from 1987) Condition: Used, but complete and fully functional Location: Ivanka pri Nitre, Slovakia Technical Details (approximate) Screw diameter: 30 mm L/D ratio: 25 D Main drive motor: Lenze GFOT 100-24 (440 V / 26 A / 2 kW / 3000 rpm) Power supply: 3 × 380–420 V / 50 Hz Control voltage: 220 V Cooling system: Air-cooled barrel with heating zones Control cabinet: Included, equipped with relays, circuit breakers, and analog meters Description Compact single-screw extruder for laboratory or small-scale production, manufactured by Plastik-Maschinenbau GmbH in West Germany. Designed for processing thermoplastics, material testing, or small extrusion lines (e.g., tubing, profiles, or coating applications). Supplied with the original electrical cabinet, pressure gauge, and documentation. Mechanically and electrically complete; ready for standard commissioning.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, load capacity: 10 kg, arm reach: 1,418 mm, controller manufacturer: FANUC, controller model: R-30iB Plus, input voltage: 230 V, type of input current: AC, repeat accuracy: 0.05 mm, warranty duration: 6 months, Equipment: documentation/manual, Mobile automation cell GEWA "RoboFlex 10", consisting of: - FANUC CRX10iA - R-30iB Plus Controller - Tablet Teach Pendant - BASIC base frame incl. 5 grid positions - without gripper (optionally available) The cell is located with us in the Eifel region and can be inspected under power by appointment. OPTIONAL: Ksdjxrknmepfx Afpjlt Connection of RoboFlex to your machine tool - Configuration of automation interface - Installation and commissioning - Operator training (2h) - Test run and handover to customer We are happy to provide you with an individual offer upon request.