Used Emco Em 17 S for sale (72,064)

Condition: good (used), Year of construction: 2002, functionality: fully functional, spindle bore: 50 mm, turning diameter over bed slide: 340 mm, turning diameter over top slide: 170 mm, center height: 170 mm, turning length: 700 mm, spindle speed (max.): 2,350 rpm, Emcomat 17 S Spindle bore: 50 mm Turning diameter over bed: 340 mm Turning diameter over support: 170 mm Center distance: 700 mm Maximum 2350 rpm. Lathe features longitudinal and cross feeds. Digital two-axis position readout. Equipped with emergency stop and chuck guard. Year of manufacture: 2002 5.3 kW 400 V Hnsdpfx Aexp Hudochor

Condition: used, Year of construction: 2005, Technical details: Hnsdpsx Apd Usfx Achor turning diameter over bed: 340 mm turning diameter over slide rest: 190 mm turning length: 700 mm spindle bore: 50 mm spindle turning speed range: 40 - 3000 U/min total power requirement: 6 kW weight of the machine ca.: 1,0 t dimensions of the machine ca.: 2 x 1 x 1,6 m

Condition: used, Technical details: turning diameter over bed: 340 mm turning diameter over support: 190 mm turning length: 700 mm centre distance: 700 mm revolution per minute: 55 - 2350 / 8 step mechanisch U/min spindle bore of work spindle: 50 mm tailstock quill adjustment:: 120 mm tailstock quill: MK3 mm max. torque on the spindle: 350 Nm max. workpiece weight -without tailstock: 50 kg total power requirement: 3,0 kVA weight of the machine ca.: 0,79 t dimension machine xH: 1,6 x 0,9 x 1,4 m The machine has seen very little use and was operated only in a repair workshop. Accessories: comparable in the picture 2x steady rest (1x closed and 1x open) various tips various lathe chucks and jaw pairs Hodou Ixw Aopfx Achjnr *

Condition: new, Machine according to DIN 8605: Lathe with increased accuracy. Distance between centers: 700 mm Distance between centers: 170 mm Swinging diameter over bed: Ø 340 mm Swinging diameter over carriage: Ø 190 mm Bed width: 260 mm Travel of longitudinal slide: 600 mm Travel of cross slide: 220 mm Travel of top slide: 110 mm Carriage length: 410 mm Carriage width: 150 mm Guide length of bed carriage: 380 mm Lathe tool shank cross-section: 20x20 mm Distance from lathe center to top slide: 34 mm Swiveling range of top slide (rest): 60/120° Main spindle: Spindle mount DIN 55029 (camlock): S 5 Spindle bore: Ø 50 mm Internal taper according to DIN 7178: 1:22 Spindle diameter in the front bearing: Ø 70 mm Max. chuck diameter: Ø 200 mm Max. faceplate diameter: Ø 200 mm Spindle speeds: 40-3000 RPM Speed control: Stepless Mechanical speed steps: 4 Main drive: Power at 40% duty cycle: 5.3 kW Max. rated torque at main spindle: 640 Nm Feed: 20 (28) longitudinal feeds Z: 0.045-0.787 mm/rev 20 (28) cross feeds X: 0.023-0.406 mm/rev Threads: 20 (28) metric threads (standard equipment): 0.4 - 7.0 mm 32 inch threads (with optional gear set D3Z200): 56 - 4 TPI 28 module threads (with optional gear set D3Z200): 0.2 - 3.5 32 diametral pitch threads (with optional gear set D3Z200): 112 - 8 Tailstock: Arbor diameter: Ø 50 mm Internal taper of arbor: MK 3 Arbor travel: 120 mm Lateral adjustment: ± 13 mm Permissible workpiece weights Suspended: 50 kg Supported by tailstock: 150 kg Further standard equipment (standard accessories): Includes machine stand and integrated 3-axis digital display, German language, with color display 1 length stop 1 center, taper 1:22, DIN 7178 1 center MK3 1 chuck key 1 key part 1 grease gun 3 hexagon head screws M16x60 - DIN 933 3 hexagon nuts M16-8 DIN 934 1 simple tool holder 1 key A13x17 DIN 837 1 open-end wrench SW 19 1 open-end wrench SW 22 1 hexagon screwdriver SW 5 1 hexagon screwdriver SW 6 Hodpfx Acedctnbshjnr 1 hexagon screwdriver SW 8 3 shear pins 1 box wrench 1 operating manual incl. parts list 1 electrical documentation 1 test report Packaging (for truck transport with pallet and plastic cover) Machine according to CE Note: Illustrations show special equipment / accessories, among other things!

Condition: like new (used), Year of construction: 2008, functionality: fully functional, turning diameter: 340 mm, turning diameter over bed slide: 340 mm, center height: 170 mm, turning length: 650 mm, total length: 1,750 mm, total width: 900 mm, total height: 1,600 mm, spindle speed (max.): 3,000 rpm, rotational speed (max.): 3,000 rpm, type of input current: three-phase, Equipment: rotational speed infinitely variable, The machine is as good as new, comes from educational use, and is equipped with a complete collet system. Hsdpfoywfrtex Achonr

Condition: used, Year of construction: 1999, Technical details: turning diameter over bed: 340 mm turning diameter over support: 190 mm turning length: 700 mm centre height: 170 mm centre distance: 700 mm revolution per minute: 35 - 3000 U/min spindle bore of work spindle: 50 mm tailstock quill adjustment:: 120 mm max. workpiece weight -without tailstock: 50 kg max. workpiece weight: 150 kg tailstock quill: 50 mm Hnodpfx Ajzlhhwschjr total power requirement: 5 KVA weight of the machine ca.: 0,78 t dimension machine xH: 1,7 x 1,0 x 1,4 m The EMCO EMCOMAT 17D is a high-quality conventional precision lathe designed for toolmaking, single-part manufacturing, repair work, and small-batch production. It is distinguished by its high accuracy, robust construction, and continuously variable spindle speed control. *

Condition: excellent (used), Year of construction: 2022, EMCOTURN E65 SMY - SIEMENS 3-AXIS CNC TURNING MACHINE WITH A TAILSTOCK AND POWERED TOOLS INCLUDING Y-AXIS AND C-AXIS Highly efficient universal turning machine for complete machining with stable and precise linear guides. State-of-the-art control technology SINUMERIK 828D with ShopTurn dialog Hnsdszi Rr Tspfx Acher programming. Main spindle: • Connection A2-6" (DIN 55026) • Max. bar diameter: ø65 mm • Max. drive power: 22 kW • Max. torque: 305 Nm • Speed range: 0-5000 rpm Tailstock: • Connection A2-6" (DIN 55026) • Drive power: 16.5 kW • Max. torque: 125 Nm • Speed range: 0-5000 rpm Tool turret: • 12-position tool turret VDI 30 radially arranged with direction logic for up to 12 powered tool holders! - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5000 rpm Y-axis: • Travel range: +/-40mm Includes: • Hollow chuck cylinder incl. draw tube • C-axis for main/tailstock • Mechanical spindle brakes • Sinumerik 828D control with HMI Operate - SHOPTURN dialog programming - USB interface - Network drive / Ethernet - 15" multi-touch color monitor - 3D simulation, etc. • Coolant system incl. coolant pump (3.5 bar) • Chuck flushing (additional pump (3.5 bar)) • Part ejector and flushing through the tailstock • Air gun with spiral hose • LED machine bay light • Hydraulic unit • Interface for chip conveyor • Vibration-damping leveling feet • Mounting angle and high-performance anchor • Documentation / CE certificate Machine No. S6E222101 Year of manufacture: 2022 • Sinumerik 828D with dialog programming • Tool turret • 12-position tool turret VDI30 • Hollow chuck cylinder, C-axis for main and tailstock • Coolant system with coolant pump, part ejector • Hydraulic unit • Chip conveyor Jomatec 1200 mm • Tool breakage and wear monitoring • Part collection device • Short bar loader interface SL1200 • Tool measurement • 14 bar high-pressure coolant system • 3-jaw chuck BB-D 210/3 KK6 • Maximum machining length 175 mm • Maximum finished part diameter 65 mm • Maximum finished part weight 4.5 kg • Internal tool holder • Straight milling holder 90 mm • Angle drilling and milling holder • Door automation E 65

Condition: like new (used), Year of construction: 2019, operating hours: 100 h, functionality: fully functional, machine/vehicle number: F9B192402, feed length X-axis: 450 mm, feed length Y-axis: 350 mm, feed length Z-axis: 400 mm, spindle speed (max.): 5,000 rpm, quill travel distance: 80 mm, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 5 m/min, rapid traverse Z-axis: 5 m/min, total height: 1,990 mm, total width: 2,030 mm, total length: 1,980 mm, table width: 270 mm, table length: 400 mm, type of input current: three-phase, rotational speed (max.): 5,000 rpm, rotational speed (min.): 10 rpm, table load: 450 kg, overall weight: 2,270 kg, input voltage: 400 V, workpiece weight (max.): 450 kg, input current: 16 A, input frequency: 50 Hz, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, EMCOMAT FB-450 MC with Sinumerik 828D Contouring control with “manual Machine” Universal Milling- and Drilling-Machine with Sinumerik 828D Contouring control and hydraulic tool clamping working area X450/Y350/Z400mm 7/10kW power Spindle speeds from 10-5000 U/min feeds from 10-5000 mm/min rapid traverse up to 5000 mm/min toolmaker accuracy DIN8615 tool clamping acc. DIN 69871 SK40 including:  linear guides  ball screws  vertical milling head +/-90° swivelling with 80mm sleeve stroke  swivel device for vertical milling head  hydraulic tool clamping  coolant equipment  LED-machine lamp Hnodexapdcopfx Acher  automatic central lubrication  rigid angle table 800x400mm  chip box  operating tools  dokumentation  executing with open work area protection (mode3)  controlled and manual version in one mashine  Sinumerik 828D Contouring control incl. Control unit in 3-Axis with ballsrews and servodrives, Conversational cycles entry with grapfic support: Drilling cycles for drilling, pecking, reaming and tapping on linear and circular hole patterns, Milling of rectangular and circular pockets and studs, Slot milling cycle, Face milling cycle, ... USB Interface,

Condition: excellent (used), Year of construction: 2000, EMCO VMC 600, Siemens Hnodpjxxakwofx Achor Year of manufacture: 2000

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: R2DU2101, CNC lathe with main and sub spindle, featuring two 12-position turrets and double bar feeder. Make: EMCO, Model: TURN 332MC Plus Year of manufacture: 2006, Serial number: R2DU2101 Control system: Siemens Maximum turning diameter: 220 mm ----- Attractive offer – flexible & worry-free We offer you not only a high-quality product, but also tailored financing options to suit your requirements. Whether you prefer a down payment, installment plan, or individual financing model – together, we will find the solution that fits your needs. Upon request, we can also arrange complete transport logistics. From planning through to reliable delivery, we ensure a smooth and punctual process so that you do not have to worry about a thing. 📞 Feel free to contact us for more information or a non-binding quote. We provide personal and professional advice. Hnodpfeyzn U Ejx Acher Subject to prior sale, modifications, and errors!

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, spindle bore: 50 mm, EMCO lathe EMCOMAT 17D ex education in very clean condition. Specifications: - year of construction 2006 - turning diameter over the bed 340mm - turning diameter over the cross slide 190mm - distance between centers 700mm - speed 40-3000rpm variable in 4 steps - diameter of main spindle 50mm Hedpfxsu N Dpms Achjnr Accessories: - 3-jaw chuck with inner and outer jaws - 3-axis digital readout - electric diagram - multifix chisel holder with 3 holders - cooling system - machine illumination - rotating center - bedstop - machine feet

Condition: ready for operation (used), Year of construction: 2007, operating hours: 17,043 h, spindle speed (max.): 2,500 rpm, travel distance X-axis: 410 mm, travel distance Z-axis: 1,560 mm, spindle motor power: 42,000 W, total height: 2,850 mm, total width: 2,400 mm, overall weight: 16,000 kg, bar diameter (max.): 102 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840D shopturn, product length (max.): 7,200 mm, workpiece diameter (max.): 610 mm, number of slots in tool magazine: 12, number of axes: 3, This 3-axis EMCO MT 110X 1500 M/S was manufactured in 2007. It features an impressive X-axis travel of 410 mm and Z-axis travel of 1560 mm, with a maximum turning diameter of 610 mm. The machine is equipped with a powerful 42 kW spindle and offers live tooling capabilities. If you are looking to get high-quality turning capabilities, consider the EMCO MT 110X 1500 M/S horizontal turning machine we have for sale. Contact us for further details. • C-Axis Resolution: 0.001° • C-Axis Rapid Traverse Speed: 1000 rpm • Main Spindle Type: A2-11" • Maximum Turning Diameter: 610 mm • Swing Over Cross Slide: 550 mm • Swing Over Bed: 820 mm • Distance Between Centers: 1500 mm • Tailstock Stroke: 820 mm • Steady Rest Stroke: 1020 mm Hsdpfszggiisx Achonr • Total Connected Load: 42 kW • Turret Interface: VDI 50 mm (DIN 69880) • Maximum Coolant Pressure Through Turret: 25 bar • Live Tool Stations: 12 • Live Tool Interface: DIN 5480 • Live Tool Speed Range: 0–4000 rpm • Live Tool Power (25% ED): 10 kW • Tailstock: Yes • C-Axis: Yes • Electrical Supply: 400 V • Frequency: 50 Hz • Phases: 3 • Rated Current: 100 A • Connected Load: 70 kVA • Production Hours: 17,043 h Additional Tooling: • Large quantity of high-quality tooling available (optional) • Chip Conveyor: Optional Technical Specification Through-spindle Coolant Yes Counter Spindle No Driven Tools Yes

Condition: used, mileage: 150 km, power: 125 kW (169.95 HP), first registration: 07/2026, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 7, loading space length: 3,600 mm, loading space width: 2,100 mm, loading space height: 450 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Are you looking for a different model, engine, dimensions, or other features? Please do not hesitate to contact us. We offer financing and leasing at attractive rates – also for the Netherlands, Austria, and new business startups! Vehicle: Wheelbase: 4325 mm * 6-speed manual transmission * Double cab * Dual rear tires * Gross vehicle weight: 5 tons * Speed limiter: 90 km/h * Digital tachograph 4.1 Technology/Comfort: Digital radio * Acoustic package * Apple CarPlay/Android Auto * MBUX multimedia system * Smartphone integration package * “Tempmatic” air conditioning * Cruise control * Electrically adjustable, heated, and extended exterior mirrors * Multifunction steering wheel, adjustable in height and inclination * Light sensor * 93L main tank * 22L AdBlue tank * Comfort driver’s seat with armrest * Passenger double seat * 7 seats * Black imitation leather seats * Pre-installation for electrical system, configurable special module * Hill-start assist * On-board computer with color display * Preparation for toll system * Central locking with remote control * Electric front windows * Fuel filter with water separator Safety: * All-season tires * Reinforced front axle * Crosswind assist * Lane keeping assist * Rain sensor * Intelligent speed assist * Reversing warning * Fog lights with cornering lights * Attention Assist * Main battery switch * Halogen headlights * Outline marker lights Hnedpfxowm Twij Achsr * Side marker lights * Adaptive brake light * Seat belt warning system * Underrun protection, EC-compliant Three-way tipper: * Smooth steel floor * Aluminum drop sides (removable) * Tie-down points in the floor * Steel cab protection with ladder support * Two small storage compartments under the body * Side underrun protection * Wheel arch protection with mud flaps * Side marker lights * Trailer hitch, 3.5t trailer load (trailer coupling ball, 12V/13-pin trailer socket) Additional extras for the body can be obtained for an extra charge. Note: Please call briefly before your visit – we will ensure that your desired vehicle is on site. If it is not in Wachtendonk, we will be happy to deliver it from our stock. Individual customization of the body is possible upon request. Your vehicle partner since 1996. Call or email us now – we look forward to hearing from you! No liability for printing and typographical errors. Errors and prior sale are reserved. Best regards, Pimenta Automobile

Condition: used, mileage: 150 km, power: 125 kW (169.95 HP), first registration: 07/2026, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 3,600 mm, loading space width: 2,100 mm, loading space height: 450 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Are you looking for a different model, engine type, dimensions, or other specifications? Feel free to contact us. We offer financing and leasing at attractive conditions - also for Austria, the Netherlands, and new business founders! ----Vehicle: Wheelbase: 4325mm * 6-speed manual transmission * Single cab * Twin rear tires * Gross vehicle weight: 5 tons * Speed limiter: 90 km/h * Digital tachograph 4.1 Technology/Comfort: Digital radio * Acoustic package * Apple CarPlay/Android Auto * MBUX multimedia system * Smartphone integration package * ?Tempmatic? air conditioning * Cruise control * Electrically adjustable, heated, and extended exterior mirrors * Multifunction steering wheel adjustable in height and tilt * Light sensor * 93L main fuel tank * 22L AdBlue tank * Driver's individual seat with armrest * Comfort driver's seat * Double passenger seat * 3-seater * Seats in black leatherette * Pre-wiring, configurable special module * Hill start assist * On-board computer with color display * Preparation for toll system * Central locking with remote control * Electric front windows * Fuel filter with water separator Safety: * All-season tires * Reinforced front axle * Rear-view camera preparation * Side wind assist * Lane keeping assist * Rain sensor * Intelligent speed assist * Rear reversing warning * Fog lights with cornering lights * Attention assist * Battery main switch * Halogen headlights * Outline lights * Side marker lights * Adaptive brake light * Seat belt warning * Underrun protection (EC) Hnedpfx Acewm Twceher Three-way tipper: * Smooth steel floor * Aluminum drop sides (removable) * Large storage box between the body and the cab * Tie-down eyes in the floor * Steel cab protection with ladder carrier * Two small storage boxes under the body * Side underrun protection * Wheel arch with mud flaps * Side marker lights * Trailer coupling 3.5t trailer load (trailer hitch ball, 12V 13-pole trailer socket) Additional extras for the body are available at an extra cost. ----Note: Please call briefly before your visit - we will ensure that your desired vehicle is on-site. If it is not located in Wachtendonk, we will gladly deliver it from our stock. Individual customization possible on request. Your vehicle partner since 1996. Call or email us now - we look forward to hearing from you! No liability for printing and typographical errors Errors and prior sale excepted Best regards Pimenta Automobile

Condition: ready for operation (used), Groschopp WK 1735309 gearbox motor with brake, serial no. 9019059, with gearbox VE 31-K-R-31, gear ratio i = 5, mounting hole spacing: 46 x 46 mm, drive shaft diameter: 10 mm, used, minimal signs of wear, 100% functional, scope of supply as shown in the photos. Hodpfei D H U Tjx Achjnr

Condition: ready for operation (used), Fanuc A06B-0844-B201 AC spindle motor SN: C96ZJ1795 S, used, in good condition, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire separately for costs of packing and shipping! Hnsdpjx Dt N Defx Achsr

Condition: ready for operation (used), Dataram DR-717 32K x 17 card (Gildemeister), serial number as shown in the photo, used, with normal signs of wear, 100% functional. Hnsdpoi D Un Refx Achjr

Year of construction: 2024, condition: new, The DA-69T control system offers both 2D and 3D programming, which includes automatic calculation of the bending sequence and collision detection. The complete 3D machine setup includes multiple tool stations and provides immediate feedback on the feasibility and handling of the product. Delem-69T features: • 3D and 2D graphical touchscreen programming • 3D representation in simulation and production • 17-inch TFT color display with high resolution • Complete Windows Application Suite • Compatible with Delem Modusys (modular scalability and adaptability) • USB, peripheral interface • Open system architecture • Sensor-based bending and correction interface • Profile-T3D offline software • Significant contribution to environmental protection; climate change and the greenhouse effect will thank us, as will future generations! AD-S 30175 with Y1, Y2, X, and R axes Bending force: 175 tons Bending length: 3050 mm Distance between stands: 2600 mm Rapid traverse speed: 120 mm/sec Working speed: 10 mm/sec Return speed: 100 mm/sec Hodpfxjd Tpadj Achenr Installation height for tool clearance and the penetration depth of your press brake: 30 mm Table width: 104 mm Table height: 900 mm Stroke: 265 mm Overhang: 410 mm Support arms: 2 pcs Backstops: 2 pcs Press force and speed of the press brake. X-axis: 500 mm/sec X-axis travel direction: 650 mm Speed of the R-axis max.: 350 mm/sec R-axis travel direction: 250 mm Motor power: 18.5 kW Oil tank capacity: 250 liters Length: 4250 mm Width: 1700 mm Height: 2750 mm Weight approx. 11500 kg Control system: Delem-69 T Options: Y1, Y2, X, R (4 axes) X=650mm X, R Control system - CNC Cybelec ModEva 19T DBEND 3D CAD/CAM import & simulation program CNC-controlled motorized crowning Adjustable front support arms with T-slot, clip stop, and guide along the entire line Rear stop: Siemens DC servo motor & linear guide & ball screw system Protective cover CE standard with manual Fiessler AKAS II M - FPSC-B-C (SAFETY PLC) Wila Hyd. top - NSCL-I-HC/UPB - PRO - Max load 180 t/m - Power pack required Wila Hyd. bottom - NSCR-I-HC-CNC/UPB - PRO - Max load 200 t/m - Power pack required Power pack for hydraulic clamping DAM (Durma angle measuring system) 2 YEAR WARRANTY The machine can be inspected and demonstrated at any time by appointment at our showroom in Staufenberg. Other machines are available for demonstration at our location in Staufenberg. Upon request, we will gladly provide you with further information.

Condition: ready for operation (used), Year of construction: 2021, Control Unit Brand HEIDENHAIN Model TNC 620 Table Table load 1500 kg Main Drive Number of axis 4 Spindle Speed 15000 RPM Tool taper SK 40 Movement Hedpfsx D Dzdjx Achjnr X-Axis Movement 1200 mm Z-Axis Movement 500 mm Y-Axis Movement 610 mm Tools Slots in storage 32 This 4-axis EMCO Emcomill EM 1200 was manufactured in 2021. It features a TNC 620 HEIDENHAIN control, a 15,000 rpm spindle, and a SK40 tool carrier. The machine offers X-1200, Y-610, Z-500 strokes and supports a maximum workpiece weight of 1500Kg. With 32 tools and 3300 operating hours, consider the opportunity to buy this EMCO Emcomill EM 1200 vertical machining centre. Contact us for more information. Application Types Milling

Condition: excellent (used), Gram Xtrem Condor S platform scale 3000 kg Hjdpfxevtl Ibo Achonr Robust industrial floor platform scale made of stainless steel. Suitable for the food and chemical industries as well as all other industries where scales come into contact with water, moisture or other corrosive substances. Maximum flexibility: Weighing pallets, drums, loaded transport or hand pallet trucks, trolleys or roll containers. Suitable for weighing standard size truck pallets (1200×1000 mm), large drums, trolleys or wheeled containers. Adjustable feet ensure stability when weighing and optimum force transmission to the load sensors. Suitable for floor installation. Otional: Ramps for loading and unloading weighed goods without special equipment Very low platform height (50 mm) for easy access to the load. Connection to Xtrem PC software for simultaneous recording of weighing values from several scales. Digital connection between platform and indicator minimizes technical problems. Verifiable according to calibration class III Gram K4i indicator - stainless steel with total protection Illuminated LCD display with extremely large digits for remote display of the weight of the object on the scale. The structure is made of stainless steel and the resolution is 30,000 / 60,000 divisions. Features LCD display with large digits (52 mm) Verifiable indicator for legal use Stainless steel housing and IP-65 protection class RS output for connecting printers, screens or a PC Wall, pillar or table mounting Function of the limit values Piece counting function Low battery indicator Max: 3000 kg Min: 20 kg e=1000g Platform scale External dimensions: 1700 x 1500 mm Weighing range: 1500×1500 mm Optional: Ramps for loading and unloading weighed goods without special equipment Weight: 239 kg You can find more items - new and used - in our store! International shipping costs on request!

Condition: used, mileage: 1,50,000 km, power: 125 kW (169.95 HP), first registration: 12/2012, fuel type: diesel, empty load weight: 2,300 kg, maximum load weight: 1,200 kg, overall weight: 3,500 kg, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: other, number of seats: 7, loading space length: 2,750 mm, loading space width: 2,100 mm, loading space height: 300 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), onboard computer, parking heater, soot filter, traction control, trailer coupling, AUTOPARADIES in Berlin, Frank-Zappa-Str. 9A Mon-Fri 9:00 AM - 5:00 PM Sat 10:00 AM - 1:00 PM Tel: Mobile/WhatsApp: VEHICLE FINANCING & TRADE-INS POSSIBLE IVECO 35S17 DOKA Flatbed: L: 20mm, W: 2100mm, H: 300mm Brakes front + rear completely new VAT can be shown separately * 1st HAND * Automatic climate control * WEBASTO parking heater * Cruise control * Trailer hitch 3500KG * ABS, ASR, airbags * 7-seater, truck registration * Electric mirrors * M+S tires Hedpfx Asy If Icjchjnr * Overall length 67mm, width 2100mm, height 2220mm * Used van in good condition! Please call to arrange a test drive appointment. Subject to prior sale and errors. Call us! We speak English. Financing, Trade-ins, You can find more offers on our website. The information provided in advertisements, on the internet, price tags, and in images are non-binding descriptions and do not constitute guaranteed characteristics. The seller also assumes no liability for errors resulting from typing, spelling, and data transmission errors. The listed equipment may need to be checked separately. Please understand that, although the technical and optical condition of this vehicle is good, we prefer to sell it to commercial businesses or for export, excluding any warranty, due to its age and mileage. Thank you very much! The vehicle description serves only for the general identification of the vehicle and does not constitute a guarantee in the legal sense of purchase. The information does not claim to be complete and is not considered a guaranteed characteristic in the sense of § 434 BGB paragraph 1, sentence 3. Errors and prior sale are subject to change.

Condition: excellent (used), functionality: fully functional, Very nice foil wrapping and sealing machine for sale. Hnodszdr Ixepfx Acher Brand: Beck, type S 17-32, made in Germany. Overhauled in 2017. This machine is equipped with a photoelectric control system and hydraulically operated cylinders. These regulate the work cycle according to the length of the product being packaged. This allows for the packaging of parts of varying lengths in any sequence, enabling fast production. You are welcome to test this machine at our facility. We can arrange transport and packaging for you and load it into a truck or container. Please inquire about a price including transport (location within the Netherlands). If you would like to purchase this machine, please send us your company details and your VAT number. We will then send you a pro forma invoice. Regards, Henk Hoos.

Condition: used, mileage: 1,66,382 km, power: 114 kW (155.00 HP), first registration: 01/2018, fuel type: diesel, number of seats: 17, gearing type: mechanical, emission class: euro6, color: white, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, Subject to errors and prior sale! Internal number: 1108. HK05425 ----EQUIPMENT * Outside mirrors, electrically adjustable, heated and foldable - with integrated indicators * Paintwork: Uni * Climate package 4 - Air conditioning front and rear including dust and pollen filter - including water heating rear - Voltage converter 230 V/150 watts (socket) - Generator 210 A * Visibility package Premium - Outside mirrors, electrically adjustable and heated - Washer fluid sensor - Outside mirrors, electrically foldable - Instrument lighting adjustable - Windscreen wipers with rain sensor - Headlight assistant with day/night sensor - Rear view camera with image transmission of the rear path in the interior mirror * Auxiliary heating package 1 - Fuel-water heating, programmable, including remote control * Parking pilot system front and rear with rear view camera - Rear view camera with image transmission of the rear path in the interior mirror * Audio system 5: Radio-CD player incl. Ford SYNC with AppLink and DAB/DAB+ - MFD (monochrome/graphics capable) with 8.8cm screen diagonal - Radio-CD player, MP3 capable, double tuner, 4 LSP front and 2 rear - Audio remote control on the steering wheel - Ford SYNC: mobile phone preparation with Bluetooth interface and voice control (wireless hands-free system for operating telephone and audio functions, microphone, access to phone book for various mobile phones and SMS reading function - USB interface and AUX input - Emergency call assistant - Applink Hnsdpfxjr E Tr Uo Acher * Seat package 14 - Driver's seat, 4-way adjustable (forward/backward, backrest, inclination, height) - Single passenger seat, 4-way adjustable (forward/backward, backrest, inclination, height) - Headrests, height adjustable - Seat heating for driver - Seat heating for passenger - Inside armrest for driver - Inside armrest for single passenger seat - Lumbar support, manual (driver's seat) -Lumbar support, manual (passenger seat) - Seat cover: fabric * Gearbox: 6-speed * Anti-lock braking system with electronic brake force distribution (EBD) * Axle load increase - front to 1850 kg * Airbag (passenger side) * Airbag driver's side * Outside mirrors, electrically adjustable and heated - with integrated indicators * On-board computer with consumption and mileage information and outside temperature display * Roof, high * Roof, overhead storage compartment at the front * Complete roof lining * Rear roof hatch * Double-wing rear door with 256° opening angle, (with window) - with heated rear windows * Tachometer * Electronic safety and stability program (ESP) with traction control (TSC) - Hill start assist - Curve control - Safety brake assist - Rollover protection * Lane assistant and fatigue warning * Windows: hinged windows, 4th row left and right * Windows: sliding windows 2nd row left * Electric front window lifter - with quick down/up switch for driver's side * Ford Easy Fuel - comfort tank cap and misfuelling protection * Heated windscreen * Speed limiter 100 km/h - cannot be switched off * Cruise control including leather steering wheel * Grab handles to the left and right of the sliding door * Lockable glove compartment with lid * Interior lighting with delay switch with reading lights at the front * Steering column, adjustable in height and reach * Ventilation nozzles in each row of seats in the footwell * Fog lights * Emergency brake light - pulsating brake lights when braking hard * Parking pilot system front and rear * Particle filter: diesel particle filt

Year of construction: 2016, condition: used, overall weight: 3,00,000 kg, total length: 16,000 mm, total width: 9,000 mm, total height: 8,000 mm, Waldrich Coburg 17 S-10 FP 300 NC / 5 m – CNC Gantry Milling MachineMachine: 17-10 FP 300 NC / 5 mSerial Number: 2.8304.06Original Year of Manufacture: 1983In 2016, it was comprehensively overhauled and modernized by the manufacturer Waldrich Coburg. The machine is equipped with a modern Siemens SINUMERIK 840D sl control system and is ideally suited for heavy-duty machining of large and complex workpieces in machine, tool, mold, and power plant construction.The delivery includes a Universal Fork Milling Head USP 300 C 350 with B-axis as well as an additional Angle Milling Head WFU 500 SZ 400 F17, ensuring versatile machining capabilities for demanding milling tasks.The machine features a modern full protective enclosure, coolant system, chip conveyor technology, and extensive technical documentation including circuit diagrams and overhaul documentation.The system has been professionally dismantled and packed in containers.It is located at the Port of Hamburg and is immediately available and ready for worldwide shipment.Manufacturer: Waldrich CoburgOverhauled by Waldrich Coburg (2016)Siemens SINUMERIK 840D slUniversal Fork Milling Head USP 300 C 350Additional Angle Milling Head WFU 500 SZ 400 F17Workpiece weight up to 100 tFull protective enclosureExtensive technical documentation availableDismantled and ready for loadingLocation: Port of Hamburg, GermanyImmediately available Passage between the uprights: 3,500 mm 5-axis machining: Yes Travel Y-axis: 3500 - mm Weight approx.: 300,000 kg Travel W-axis: 800 - mm Travel Z-axis: 2050 - mm Hjdpszc Sagefx Achjnr Tool holder type: ISO 50 Travel X-axis: 5700 - mm Movement B-axis: 0 - 180 ° Dimensions (LxWxH) approx.: 16000 x 9000 x 8000 mm Year of construction: 2,016 Condition: unchecked Terms of payment: 100% prepayment before pick-up Terms of delivery: FOB Free On Board under power: No

Year of construction: 2023, condition: excellent (used), Professional pneumatic device for emptying SEMCO 600 ml cartridges and containers, designed for industrial applications (adhesives, sealants, pastes, high-viscosity materials). Manufacturer data: • Manufacturer: axiss GmbH (Germany) • Type: 9110 / B-SEMCO600-PN-KM-F • Year of production: 2023 • Serial number: 514 • Quality standard: DIN EN ISO 9001:2015 • CE marking Hedpfx Aceyc Nzuehsnr Technical description: • Pneumatic emptying of SEMCO 600 ml cartridges • Robust construction on an aluminium profile mounting plate • Piston assembly with transparent sleeve (position control) • Pressure regulator with pressure gauge • Directional control valve • Pneumatic quick couplings • Shut-off valve (safety) • Vertical or horizontal mounting possible • Smooth and controlled operation