Used Extension Cable for sale (8,297)

Condition: used, “functionally tested; item originates from the dismantling of equipment at an automotive supplier” Quantity available: 11 Manufacturer: Cleco Type: 961260-060 Dodpfx Apjzr Ub Rotocl Length: 6 m Application: Standard extension cable for control and tool connections

Condition: used, KUKA TEACH PENDANT EXTENSION CABLE Dedpfx Apjh R T Efjtocl 00-110-438 PLEASE CONTACT US FOR FURTHER INFORMATION!

Condition: good (used), Inductive sensor, electronic sensor, sensor cable, connection cable, link cable -Manufacturer: Wieland, Connection cable extension cable 24-pin -Type: unfortunately without a type designation Dodpfx Apokvrp Notocl -Length: 25 m -Transport dimensions: 640/600/H100 mm -Weight: 14 kg

Condition: good (used), Power cables, extension cables -Extension cable: Length 25 m -Plug: Mennekes 13112 CEE plug 63 A 5-pin 400 V -Transport dimensions: Ø 600 x 190 mm -Weight: 26 kg Djdpfxex Ei I Ij Aptocl

Condition: good (used), Testing device for extension cables -Socket tester -Testing device for: extension cables, table sockets -Weight: 30 kg Dcjdpfx Apeb A Iufstel

Year of construction: 2004, condition: used, functionality: unexamined, machine/vehicle number: 116996-04, Manufacturer: SPECTRO Analytical Instruments GmbH & Co. KG Type: SPECTROLAB F / LAVFC01A Year of Manufacture: 2004 Project/Order No.: 16996/04 Lab No.: 116996-04 Stationary metal analysis instrument / OES spark spectrometer for copper alloys Stationary SPECTRO SPECTROLAB F metal analysis instrument for quantitative material analysis using optical emission spectrometry (OES/spark spectrometry). According to the available original documentation, the system is designed for the analysis of copper-based materials. The programs CU-00 for standardizing the Cu base, CU-20 for Cu/Zn alloys, and CU-70 for Cu/Al alloys are installed and documented. The spectrometer has three documented optics and measurement channels for numerous alloy elements and accompanying elements. Among others, it detects Cu, Zn, Pb, Sn, Al, Fe, Ni, Si, Mn, Mg, Cr, Co, Cd, Sb, P, and S. Extensive original documentation is available for the instrument, including test and photomultiplier protocols, configuration documents, standardization documents, and the operating manual for the Spark Analyzer Vision software. Various re-calibration/reference samples and accessories are also included. An existing analysis printout dated December 20, 2022, documents the practical use of the system for the analysis of CuZn40Pb2 materials. The printout shows measured values for numerous alloy and trace elements. Used condition with signs of wear and tear due to age and use. The instrument dates from 2004. Extensive instrument-specific documentation, accessories, and re-calibration/reference samples are available. The use and performance of material analyses are documented by existing analysis printouts from December 2022. Scope of delivery • SPECTRO SPECTROLAB F metal analysis instrument • Available re-calibration/reference samples • Various sample specimens and standards • Set of cables or available connection lines • Small parts and consumables • Adapter for small parts • Available boron nitride discs • Available SPECTRO accessories • Software/data carrier, including SPECTRO Data Backup • Documentation and test documents • Operating manual Spark Analyzer Vision Dedpfx Apezx Dwnetscl • Documents for DIA 2000 / DIA2000SE • Photomultiplier test protocols • Configuration and standardization documents PC, monitor, and printer are listed in the original delivery documents. Measurement method: Optical emission spectrometry (OES) / Spark spectrometry Design: Stationary metal analysis instrument Readout system: MICRO 8 Calibration: Cu-base Applications: Cu-20 / Cu-70 Standardization: CU-00 – Cu-Base Installed programs: CU-00 – Standardization Cu-Base CU-20 – Cu/Zn alloys CU-70 – Cu/Al alloys Optical system: 1 × UV optic, documented with 6 lines 2 × Air optics, documented with 13 / 7 lines Optic 1: 3600 / 750 Optic 2: 3600 / 750 Optic 3: 2400 / 750 Monochromator: No Excitation source: 3000 / 300 Hz / Pure Ar Operating voltage: 230 V Mains frequency: 50 Hz Operating language: German Documented elements: Cu, Zn, Pb, Sn, Al, Fe, Ni, Si, Mn, Mg, Cr, Co, Cd, Sb, P, S Photomultiplier: predominantly R6350, individual UV channels R6351 according to test documents Software according to documentation: DIA 2000 Basis / DIA2000SE, Spark Analyzer Vision Spark Analyzer Vision manual: Version 09/2004 Documented software version: 1.40.0xx

Year of construction: 2022, operating hours: 15 h, condition: used, functionality: fully functional, operation weight: 30 kg, feed force X-axis: 20,000 N, pipe diameter (max.): 14 mm, machine/vehicle number: 79000, Lancier Smart Wheel 2022, used very little Very few operating hours (approx. 38 hours) Includes extensive accessories Includes HONDA EU22i generator Includes cable guiding set 2.6 mm - 3.7 mm Includes cable guiding set 6.7 mm - 9.0 mm Includes drive wheel set without groove 0.8 - 3.4 mm Includes drive wheel set with groove 3.5 - 9.0 mm Djdpfx Aszphdteptocl Includes steel transport box Includes compressed air hose with claw coupling, 10 m The blowing device Automatic logging For cable diameter 1.5 - 9 mm For outer pipe diameter 7 - 14 mm Blowing speed 0 - 100 m/min Thrust force 20 daN L x W x H 500 x 400 x 400 mm Weight: approx. 30 kg Order no. 79000

Year of construction: 2024, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 04344, BRAND NEW Leistritz ZSE Maxx Series (27 / 40 / 50) – 48 L/D – 0 Hours – Factory Wrapped! Dcodpfx Apey Ufk Rjtjl Technical Specifications Manufacturer: Leistritz Extrusionstechnik GmbH Models Available: ZSE 50 Maxx ZSE 40 Maxx ZSE 27 Maxx Year of Manufacture: 2024 Condition: 100% Brand New (Zero operating hours, completely unused, still in original factory packaging/wrapping) L/D Ratio: 48 L/D (All units upgraded directly by Leistritz with brand-new complete barrel sets and new shafts) All machines are with side feeders. Description Available for immediate individual or package sale: Three (3) pristine, 2024 Leistritz ZSE Maxx Twin-Screw Extruders (Models: ZSE 50 Maxx, ZSE 40 Maxx, and ZSE 27 Maxx). These machines were originally dedicated laboratory units held by Leistritz. To meet high-specification production requirements, Leistritz directly upgraded all three machines to a 48 L/D ratio. These OEM upgrades included a brand-new, complete barrel set and brand-new shafts installed entirely by the factory. All three machines are in 100% brand-new condition with zero (0) operating hours. They remain fully wrapped and packed in their original factory delivery boxes—they have never been opened, touched, or commissioned since arriving from Leistritz. Each machine is a complete, turnkey system supplied with its own high-end feeding setup, control architecture, and an extensive array of genuine auxiliary tools and spare parts. Scope of Delivery & Included Accessories (Per Machine) Feeding & Extrusion Setup Volumetric Feeder & Side Feeder (with dedicated side feeder trolley) Feed Ports Downstream & Die Attachments Strand Die Head, Die Plates, & Screen Carrier Plates Control & Electrical System Full Control Cabinet (including the Macrometer integrated into the operational panel) Complete set of Connection Cables & Cables for the Main Drive Comprehensive Spare Parts Kit for the control cabinet Vacuum & Degassing System Spare set of Screw Vacuum Pumps, Vacuum Hoses, & Vacuum Gauges Vacuum Pump Heating/Cooling Systems & Connection Hoses Sensors, Maintenance & Installation Melt Temperature & Melt Pressure Sensors Screw Mounting Device, Screw Extractors, & Cleaning Brushes Lifting Rods, Leveling Elements, & Corrosion Inhibitors Listing Summary for Buyers Available Models: ZSE 27 Maxx, ZSE 40 Maxx, ZSE 50 Maxx. Immediate Availability: Skip the massive factory lead times for a brand-new Leistritz line. OEM Guaranteed: All modifications and extensions to 48 L/D were performed officially by Leistritz. Pricing available for individual machines or as a complete 3-machine package. Photos of the packed crates and original documentation are available upon request.

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, laser type: fiber laser, Used laser cutting system with 8 kW fiber laser and LiftMaster Compact (Stopa version) Manufacturer: TRUMPF Model: TruLaser 5040 fiber (L69) Year of manufacture: 2015 Operating hours approx.: 67,000 h, Laser on: 40,100 h TECHNICAL DATA: Maximum material thickness: Mild steel O2: 25 mm, Stainless steel N2: 40 mm, Aluminum N2: 25 mm, Copper O2: 10 mm, Copper N2: 5 mm, Brass N2: 10 mm Position deviation: 0.05 mm Max. position scatter Ps max: 0.03 mm Working area: 4,000 x 2,000 mm Laser power: 8,000 watts Dcjdpfxoy A I Tqo Aptel STANDARD EQUIPMENT Machine: Closed machine frame Torque drive combined with linear direct drives Enclosed beam guidance via fiber optic cable (LLK) Cooling unit Machine cooling unit (water-air) Integrated control cabinets with interior lighting Integrated storage cabinet Automatic longitudinal pallet changer 19" touch color screen Longitudinal conveyor belt TruDisk power supply via the machine Work area illumination Positioning laser diode Spray unit PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning Copper cutting package (includes cutting data) Brass cutting package (includes cutting data) Transport and assembly device SPECIAL EQUIPMENT: Solid-state laser TruDisk 8001 with 1 fiber output Smart Nozzle Automation (includes nozzle changer, automatic nozzle condition monitoring, and smart skip) BrightLine fiber CoolLine (only with BrightLine fiber) DetectLine: precise sheet position detection (incl. automatic focus measurement) Wide transverse conveyor with tipping container (container to the right of the machine) Cleaning brush Integrated camera (Full HD) for process monitoring and single frame transmission to the network (view of the first 2.5 m) Additional 10 m extension of fiber optic cable between laser and machine Smart Collision Prevention (requires smart-collision-prevention plug-in for TruTops) Machine podium version (without steel structure) Storage interface for STOPA large-scale storage systems (SKL or UL) Safety devices for storage integration incl. 2nd light barrier circuit Storage interface (without storage cart) LiftMaster Compact (STOPA version) TRUMPF Laser: Solid-state laser TruDisk 8001 with one fiber output Fiber optic cable as per standard layout Laser cooling unit (water-air) Excitation via pump diodes Laser power control (The TruDisk laser is subject to international export controls. According to EC Dual-Use Regulation 428/2009 (laser covered under 6A005)) Cutting head: Universal cutting unit with fully adaptive lens system Piercing head strategy Protective glass to prevent lens contamination Protective glass condition check ControlLine: height control and sheet outer edge detection Control system: SINUMERIK 840D SL control Simple workshop programming TruTops Laser via network access Quick re-production Integrated TRUMPF technology data Automatic shut-off Programmable cutting gas/pressure selection ContourLine FastLine FlyLine Microweld AdjustLine Teleservice via Internet Data transfer: USB interface RJ-45 network connection Safety: CE marking Light barriers Multi-chamber exhaust system Compact extraction unit Machine enclosure, certified viewing window, door on right Electric roll-up roof This used machine can be inspected under production conditions. All details without guarantee – sale is without any form of warranty or guarantee. Subject to prior sale.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 15 h, functionality: fully functional, total height: 900 mm, total length: 900 mm, total width: 700 mm, overall weight: 180 kg, input voltage: 380 V, type of input current: three-phase, laser hours: 15 h, laser power: 3,000 W, laser type: fiber laser, laser source manufacturer: Max Photonics, Equipment: documentation/manual, Hongniu HN-2000H – 3000W Fiber Laser Cleaning Machine Industrial fiber laser machine for fast removal of rust, paint, coatings and surface contamination. Dcodpfx Apozy D Dkjtsl This is an ex-display/demo machine and has been used for only approximately 15 hours. It is in excellent, very clean condition. Specifications: 3000W MAX Photonics laser source Industrial water chiller 10 m cleaning torch cable Dimensions: 900 × 700 × 900 mm Weight: 180 kg Included: One-year supply of protective lenses Nitrogen cylinder 20 m extension cable An invoice will be provided. The machine is located in İzmir, Türkiye, and is available for inspection.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2024, total length: 1,250 mm, total height: 1,900 mm, total width: 2,000 mm, overall weight: 1,850 kg, No minimum price – guaranteed sale to the highest bidder! Lease return due to factory closure. Machine for the automatic and precise separation or singulation of printed circuit boards from a PCB panel. MACHINE DETAILS New price 2024: €149,000.00 net Processed printed circuit boards: 42,680 pieces Dimensions of pallet (L x W x H): 1,250 x 2,000 x 1,900 mm Machine weight: approx. 1,850 kg EQUIPMENT Cutter diameter control Wear parts package DIVISIO Automatic transport width adjustment SMEMA transport height Separation module, shank cutter 500 W Hardware module, camera Software module, teach function for camera Software module, fiducial mark recognition Extension, 8-position tool changer Extraction hose, manual Monitoring of suction power ASYCAM CAD data conversion A Adrep Offset main switch ESD energy chains and P-hoses, standard Packaging size, group 3 pallet • The height and weight of the asset must be taken into account when selecting the transport vehicle. • A forklift is available for loading. • If the asset is not collected on time, a storage fee of €20.00 per lot and commenced day will be charged. The fee must be paid before collection. • The sale is made without any guarantee or warranty. • No liability is accepted for typing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the auction ends. Dcodpezvb I Ejfx Aptel

Condition: refurbished (used), Year of construction: 2022, machine/vehicle number: R-00609, load capacity: 210 kg, arm reach: 2,655 mm, controller manufacturer: R-30iB Plus A-size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC R-2000iC/210F manufactured in 2022.08. The robot comes with an R-30iB Plus A-size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC  Model: R-2000iC/210F Model Number: A05B-1333-B205 Year of Manufacture Robot: 2022.08 Warranty term (months): 12   Payload (kg): 210 Reach (mm): 2655 Repeatability (mm): ± 0.05 Dodpfx Aszxwqneptjcl Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1090   Controller: R-30iB Plus A-size Year of Manufacture Cabinet: 2022.08 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 10

Condition: refurbished (used), Year of construction: 2023, machine/vehicle number: R-00679, load capacity: 25 kg, arm reach: 1,831 mm, controller manufacturer: R-30iB Plus A-size, teach pendant manufacturer: A05B-2256-C101#EGN, Refurbished FANUC M-20iD/25 manufactured in 2023.01. The robot comes with an R-30iB Plus A-size controller including iPendant. Djdpfx Apjzychzetocl   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-20iD/25 Model Number: A05B-1228-B202 Year of Manufacture Robot: 2023.01 Warranty term (months): 12   Payload (kg): 25 Reach (mm): 1831 Repeatability (mm): ± 0.02 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Angle Mount Weight (kg): 250   Controller: R-30iB Plus A-size Year of Manufacture Cabinet: 2023.01 RCC Length (m): 7   Teach Pendant: A05B-2256-C101#EGN Teach Pendant Cable Length (m): 10  

Condition: used, Year of construction: 2011, Used Equipment Year of Manufacture: 2011 Condition: Currently installed Equipment and Technical Data: Dcjdpezvz Tbjfx Aptjl -Filter housing base ring NFHSU 9/9 with discharge chute for press - Discharge: 1.1 kW - Storage volume in the base ring approx.: 3.25 m³ - Dimensions L x W x H (incl. base ring) 2440 x 2440 x 900 mm - Ground clearance: 350 mm - Conveyor screw for briquetting press 0.75 kW - Extension and expansion rings are optional; max. storage volume approx. 12 m³ - Extension and injection ring NFHSU for 9/9 and 10/10 Jet, L x W x H: 2480 x 2480 x 500 mm - Expansion ring for NFHSU 9/9, 2480x2480x700 mm, with inspection door and type-tested explosion flap - Filter for filter housing NFHSU 9/9/20, filter area 116 m²: The Nestro filter system NFHSU is a solid filter construction made of 4 mm galvanized steel sheet and is designed for outdoor installation and weather resistance. This filter system is particularly robust and designed for underpressure operation up to -3,500 Pa. The filter system is equipped with upper and lower inspection doors 600 x 600 mm, with automatic filter regeneration, dry extinguishing system, differential pressure switch / volumetric flow monitoring and the necessary explosion protection. Note: Filter is equipped with high-quality filter material, BIA category M, antistatic, residual dust content < 0.1 mg/m³ and suitable for return air operation. Further technical data: - Filter tube length: 2,000 mm - Filter tube diameter: 230 mm - Number of filter tubes: 81 - Filter area: 116.0 m² - Filter regeneration: automatic/motorized - Number of vibrating motors: 4 pcs - Fan shroud for NFHSU 9/9 including inspection door - Fan US-FHN (clean gas) 22 kW 16,400 m³/h - 3,200 Pa: A Nestro high-performance fan with above-average efficiency and high energy saving potential when using a frequency inverter (optional). The robust welded construction is primed and painted in RAL 5015. The fan is delivered as standard with an inlet cone and backflow damper. Technical data at a glance: - Volumetric flow: 16,400 m³/h - Corresponding underpressure: 3,200 Pa - Electric motor: 22 kW / 400 Volt / 50 Hz - Speed: 3,000 rpm - Design: B5 - Pressure nozzle: without - Application area: Nestro underpressure filter and others - Injection nozzle d= 400 mm with flange ring - Injection nozzle d= 350 mm with flange ring - Backflow damper d= 350 mm with flange edge - Backflow damper d= 400 mm with flange edge - Briquetting press C150; 30 - 50 kg/h, hydraulic unit 5.5: Technical data: - Power consumption (hydraulics): 5.5 kW - Briquette diameter: 50 mm - Weight: 650 kg - Briquetting performance with a bulk density of approx. 250 kg/m³, material-dependent: 30 - 50 kg/h - Ground clearance with base frame (art. no. 710300): 350 mm - Briquetting press, dust-proof - Briquetting press complete with hydraulic solenoid valve control for automatic operation, oil tank with 100 l oil, in welded construction, including main cylinder, stuffing cylinder, gripper cylinder, pressing jaw, electrical control panel with fully automatic control and 5 m cable The press is standardly equipped with: Monitoring switch for oil temperature, hardened press bushing, connection part for briquette line and automatic briquette length adjustment

Condition: refurbished (used), Year of construction: 2017, machine/vehicle number: R-00599, load capacity: 125 kg, arm reach: 3,100 mm, controller manufacturer: R-30iB B-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC R-2000iC/125L manufactured in 2017.02. The robot comes with an R-30iB B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: R-2000iC/125L Model Number: A05B-1333-B261 Dodpfxezycgqj Aptscl Year of Manufacture Robot: 2017.02 Warranty term (months): 12   Payload (kg): 125 Reach (mm): 3100 Repeatability (mm): ± 0.05 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1115   Controller: R-30iB B-Size Year of Manufacture Cabinet: 2017.02 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 10

Condition: good (used), Year of construction: 2009, operating hours: 35,961 h, functionality: fully functional, load capacity: 6 kg, arm reach: 810 mm, IRB 140 is designed specifically for manufacturing industries that use flexible robot-based automation. The robot has an open structure that is specially adapted for flexible use, and can communicate extensively with external systems. Used IRB140-6/0.8 Year: 2009 Cabinet: IRC5 Teach Pendant: NOT included but we can try to find one for you Signalling & Power Cables: Included Gripper: NOT included, can be provided up on request. Please contact us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brand of KUKA, ABB, FANUC and Motoman. (Source ABB's Website) Dcodjqzww Nspfx Aptol

Condition: refurbished (used), Year of construction: 2019, machine/vehicle number: R-00658, load capacity: 45 kg, arm reach: 2,050 mm, controller manufacturer: IRC5, teach pendant manufacturer: DSQC679, Refurbished ABB 4600-45/2.05 manufactured in 2019.04. The robot comes with an IRC5 controller including Flexpendant DSQC679.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The oil is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: ABB Model: 4600-45/2.05 Model Number: IRB Year of Manufacture Robot: 2019.04 Warranty term (months): 12   Dcjdpfx Apszychnetol Payload (kg): 45 Reach (mm): 2050 Repeatability (mm): ± 0.05 Controlled Axes: 6-axis Installation Type: Floor, Upside-down Mount Weight (kg): 425   Controller: IRC5 Year of Manufacture Cabinet: 2019.04 RCC Length (m): 14   Teach Pendant: DSQC679 Teach Pendant Cable Length (m): 15

Condition: refurbished (used), Year of construction: 2019, machine/vehicle number: R-00623, load capacity: 25 kg, arm reach: 1,853 mm, controller manufacturer: R-30iB Plus, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC M-20iB/25 manufactured in 2019.07. The robot comes with an R-30iB Plus controller including iPendant. Dcjdezycg Repfx Aptel   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-20iB/25 Model Number: AO5B-1226-B201 Year of Manufacture Robot: 2019.07 Warranty term (months): 12   Payload (kg): 25 Reach (mm): 1853  Repeatability (mm): ± 0.02 Controlled Axes: 6-axis Installation Type: Floor, upside-down, and angle Mount Weight (kg): 210   Controller: R-30iB Plus Year of Manufacture Cabinet: 2019.06 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 10  

Condition: refurbished (used), Year of construction: 2015, machine/vehicle number: R-00631, load capacity: 20 kg, arm reach: 3,110 mm, controller manufacturer: R-30iB A-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC M-710iC/20L manufactured in 2015.11. The robot comes with an R-30iB A-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-710iC/20L Model Number: A05B-1125-B205 Year of Manufacture Robot: 2015.11 Warranty term (months): 12   Payload (kg): 20 Reach (mm): 3110 Repeatability (mm): ± 0.11 Dedpozychhsfx Aptecl Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 540   Controller: R-30iB A-Size Year of Manufacture Cabinet: 2015.10 RCC Length (m): 7   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10

Year of construction: 2026, condition: new, We also offer leasing and financing options. Please feel free to contact us! ‼️ATTENTION‼️ There are currently machines being offered on various platforms from China. Most CE markings are counterfeit. These machines are not EU-compliant. Their electrical configuration is also not approved for use in Germany. Several customers contacted us asking how to extract copper from such a machine, as all they got was shredded cable mixture. We tested these machines ourselves two years ago, and the customers are correct—these machines do not yield pure copper. These machines are not permitted for operation in Germany! Buy from us and make use of our expertise—see the machines for yourself at our Heilbronn facility. We provide long-term support and always help you to separate top-quality copper. Your Josan & Söhne Team! German quality, CE certified, EU-compliant, and available for live demonstration—not just edited or cut videos. We strongly recommend buying locally here in Germany. German guarantees, local laws, fixed prices, and German-language support in case of future issues. You get all this only with machines purchased from us. You're welcome to inspect our quality in person by appointment. Remember, videos can be edited. We offer live demonstrations‼️ We stock shredders and other recycling machinery for all recycling needs at our Heilbronn location! From copper recycling to plastics recycling—you can purchase all the necessary machines from us. Just ask! ‼️INSPECTION AT OUR FACILITY POSSIBLE‼️ Our compact model works just as perfectly as our larger machines, only smaller and more affordable. Top-grade copper granulate. Can be used in any garage. Approx. 20-30 kg input per hour. From stranded cables, extension cords, automotive cables, telephone cables, NYM cables—our machines can recycle it all! Josan Cable Granulator E30 We are happy to demonstrate the machine live in Heilbronn! Appointments only! We are based in Heilbronn as a German company, subject to German laws, with warranty and service! We also speak English! Dsdpfxsp E Efys Aptjcl ‼️For further questions, please get in touch! We can only respond if you contact us with your name, address, email, and phone number. Any other inquiries may be filtered as spam. We will get back to you and provide preliminary advice! Here is our entry-level model: ➡️With 380 V ➡️For cable diameters approx. 0.1–30 mm ➡️Power approx. 4.2 kW ➡️Input approx. 20–30 kg/h ➡️Weight approx. 310 kg ➡️Dimensions approx. 88×74×173 cm ➡️With UVV (accident prevention regulation) executed by our German company With this machine, you can process cables into copper granulate. We also offer larger systems and accessories such as hydraulic cable cutters, electric motor breakers, triple-separators, etc. Complete solutions for cable recycling. When you buy from us, you also buy our service! This is extremely important, especially with these machines! Please note: our service applies only to machines and accessories purchased from us. With our know-how and our machinery, you will reliably produce copper granulate—not unseparated material. Net price 8,999.00€ +19% VAT 1,709.81€ Gross price 10,708.81€ Our machines are CE-certified. Subject to errors. Images, prices, and features may differ.

Condition: refurbished (used), Year of construction: 2016, machine/vehicle number: R-00672, load capacity: 60 kg, arm reach: 2,050 mm, controller manufacturer: IRC5, teach pendant manufacturer: DSQC679, Refurbished ABB IRB 4600-60/2.05 manufactured in 2016.05. The robot comes with an IRC5 controller including Flexpendant DSQC679.   Dedszxb Rrspfx Aptocl Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The oil is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: ABB Model: IRB 4600-60/2.05 Model Number: IRB Year of Manufacture Robot: 2016.05 Warranty term (months): 12   Payload (kg): 60 Reach (mm): 2050 Repeatability (mm): ± 0.05 Controlled Axes: 6-axis Installation Type: Floor, Upside-down Mount Weight (kg): 425   Controller: IRC5 Year of Manufacture Cabinet: 2016.05 RCC Length (m): 14   Teach Pendant: DSQC679 Teach Pendant Cable Length (m): 15

Condition: refurbished (used), Year of construction: 2017, machine/vehicle number: R-00566, load capacity: 10 kg, arm reach: 2,530 mm, controller manufacturer: IRC5, teach pendant manufacturer: DSQC679, Refurbished ABB  4400L/10 manufactured in 2017.05. The robot comes with an IRC5 controller including Flexpendant DSQC679.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The oil is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: ABB Model: 4400L/10 Model Number: IRB Year of Manufacture Robot: 2017.05 Djdpfx Apozxwqzjtocl Warranty term (months): 12   Payload (kg): 10 Reach (mm): 2530 Repeatability (mm): ± 0.05 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1040   Controller: IRC5 Year of Manufacture Cabinet: 2017.05 RCC Length (m): 14   Teach Pendant: DSQC679 Teach Pendant Cable Length (m): 15

Condition: refurbished (used), Year of construction: 2017, machine/vehicle number: R-00630, load capacity: 165 kg, arm reach: 2,655 mm, controller manufacturer: R-30iB A-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC R-2000iC/165F manufactured in 2017.01. The robot comes with an R-30iB A-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Dcodpfxjzychbe Aptsl Brand: FANUC  Model: R-2000iC/165F Model Number: A05B-1333-B201 Year of Manufacture Robot: 2017.01 Warranty term (months): 12   Payload (kg): 165 Reach (mm): 2655 Repeatability (mm): ± 0.05 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1090   Controller: R-30iB A-Size Year of Manufacture Cabinet: 2016.12 RCC Length (m): 14   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 10

Condition: refurbished (used), Year of construction: 2016, machine/vehicle number: R-00677, load capacity: 7 kg, arm reach: 911 mm, controller manufacturer: R-30iB Mate, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC LR Mate 200iD/7L manufactured in 2016.12. The robot comes with an R-30iB Mate controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard! Djdpfozxzpnjx Aptocl   Brand: FANUC Model: LR Mate 200iD/7L Model Number: A05B-1142-B301 Year of Manufacture Robot: 2016.12 Warranty term (months): 12   Payload (kg): 7 Reach (mm): 911 Repeatability (mm): ± 0.018 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 27   Controller: R-30iB Mate Year of Manufacture Cabinet: 2016.11 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 12

Condition: refurbished (used), Year of construction: 2016, machine/vehicle number: R-00676, load capacity: 150 kg, arm reach: 3,200 mm, controller manufacturer: IRC5, teach pendant manufacturer: DSQC679, ABB IRB 6700-150/3.20 manufactured in 2016.05. The robot comes with an IRC5 controller including Flexpendant DSQC679.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The oil is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: ABB Model: IRB 6700-150/3.20 Model Number: IRB Dedpfxjzxzm Ho Aptscl Year of Manufacture Robot: 2016.05 Warranty term (months): 12   Payload (kg): 150 Reach (mm): 3200 Repeatability (mm): ±0.06 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1280   Controller: IRC5 Year of Manufacture Cabinet: 2016.05 RCC Length (m): 14   Teach Pendant: DSQC679 Teach Pendant Cable Length (m): 15