Used Falch Trail Jet 125-26-0-D for sale (1,09,667)

Condition: used, Year of construction: 2019, operating hours: 3,420 h, functionality: fully functional, machine/vehicle number: W09FAL226KMF14072, operating pressure: 500 bar, total length: 2,700 mm, total height: 2,100 mm, total width: 2,100 mm, pressure: 500 bar, empty load weight: 2,600 kg, input voltage: 12 V, fuel: diesel, heating capacity: 198 kW (269.20 HP), overall weight: 2,600 kg, water tank capacity: 400 l, fuel tank capacity: 220 l, temperature: 100 °C, volume flow: 1.8 m³/h, noise level: 100 dB, pressure (max.): 500 bar, Falch Trail jet 30 500-30-95-d high-pressure cleaner, year of construction 2019. The machine runs at a pressure of 100 - 500 bar and a temperature of 10⁰c - 100⁰c. Its has a remote control feature to remotely control temp, pressure and on and off. Also it comes with the front storage box. The machine has been fully serviced and maintained by falch. It has been well looked after with one owner from new. Manufacturer: Falch Fgodpsy Sazfofx Am Tjd Model: Trail jet 30 500-30-95-d Construction year: 2019 Serial number: G57200378 EU type number: e1*2007/46*0386*01 Identification number: W09FAL226KMF14072 Weight: 2600 kg Vertical load: 120 kg Axle 1 load: 1300 kg Axle 2 load: 1300 kg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: like new (used), Year of construction: 2016, operating hours: 1,275 h, functionality: fully functional, machine/vehicle number: W09FAL226GMF14035, operating pressure: 2,500 bar, total length: 3,750 mm, high-pressure hose length: 2,000 mm, total height: 2,040 mm, total width: 1,980 mm, empty load weight: 1,980 kg, fuel: diesel, Equipment: chassis, Falch Trailer Tandem Trail Jet 125, equipment can also be sold individually. ATTENTION: A sedimentation system, model cont. sed 100.100 from Falch, can be purchased separately; price upon request. Extensive accessories, see photos. Used Falch Trail Jet 125 high-pressure cleaner with a working pressure of 2500 bar. The unit is in very good technical condition and ready for use. The following components are included with the unit: Fodpfx Amozdy Imo Togd - 3 high-pressure hoses from Falch, 1 loose, 2 on the frame - 1 control line for connecting the Falch gun - 2 rotating 4-nozzle heads from Falch - Falch spray gun - Whel Fan 2, year of manufacture 2020 - Floor cleaner Scater 25 260 vc - Additional accessories for the machine: seal kits, filters, etc. Technical data: Year of manufacture 2016, with only 1275 operating hours. The unit allows adjustment of the working pressure.

Condition: not inspected (used), Year of construction: 2020, operating hours: 4,809 h, functionality: unexamined, operating pressure: 2,500 bar, overall weight: 2,030 kg, rotational speed (min.): 650 rpm, rotational speed (max.): 1,800 rpm, water tank capacity: 80 l, TECHNICAL DETAILS Working pressure: 600 - 2,500 bar Fsdpfx Amoyx Uwuj Togd Flow rate: 9 - 26 l/min Drive power: 160 kW / 132 kW motor Speed range: 650 - 1,800 rpm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,240 x 1,550 x 1,780 mm Total weight: 2,030 kg Input voltage: 400 V Power connection: 400 V / 50 Hz Fuse protection: 250 A Operating pressure water inlet: 2.0 - 8.0 bar Max. inlet temperature: +40 °C Water tank capacity: 80 l Pump speed range: 220 - 610 rpm Engine oil capacity: 10 l Noise level: 75 dB Operating hours: 4,809 h EQUIPMENT High-pressure pump with frequency converter (continuous operation 24 h/day) Standard accessories

Condition: excellent (used), Year of construction: 2017, operating hours: 4,000 h, functionality: fully functional, operating pressure: 2,500 bar, Used Falch Trail Jet 125 high-pressure washer with 2500 bar pressure. The unit is in very good technical condition and ready for operation. Included with the device are the following items: Fodpfexzk U Sox Am Tsgd - 3 new Falch high-pressure hoses - 3 used Falch high-pressure hoses - 3 control cables for connecting the Falch gun - New Falch 4-nozzle rotary head - Falch gun - 3 lance extensions for the Falch gun - Additional components for the machine: sets of seals, filters, etc. The machine has been serviced at the Falch headquarters and has operated for 5 hours since service. Machine data: Year of manufacture: 2017, power: 129 kW, Deutz engine. The machine allows for adjustable working pressure.

Condition: like new (used), Falch Trail Jet 15, 300 bar, 24 l/min, 305 operating hours Fedpfx Aswlkrujm Tegd

Condition: like new (used), Falch Trail Jet 15, 06/2024, as new with warranty, 232 operating hours Fgjdpfewz Scaex Am Tsd

Condition: good (used), Year of construction: 2016, operating hours: 1,300 h, functionality: fully functional, operating pressure: 500 bar, empty load weight: 1,420 kg, fuel: diesel, power: 34.5 kW (46.91 HP), temperature: 95 °C, volume flow: 1,800 m³/h, Equipment: chassis, Dynajet 500 TH hot water system - Very good condition 500 bar / 30 l/min Fedpfx Asv S H Uaom Tegd 34.5 kW

Condition: excellent (used), Year of construction: 2016, Contact us via WhatsApp or [phone number]. Falch Trailjet 30, high-pressure water system with 500 bar and 30 liters of hot water. The pump is in excellent condition; new filters, oils, seals, etc. Fgsdpfx Aeia U Rijm Tsd

Condition: like new (used), Year of construction: 2018, Dynajet 500th Pressure Washer Year of manufacture: 2018 Max. temperature range: 95°C Brand: Dynajet Mobile: yes Serial number: 62005720 Type: 500th Maximum working pressure: 500 bar Fgedpfsyigr Uex Am Tjd With remote control; water tank 1000 l; unladen weight 1420 kg; approx. 30 m high-pressure hose; approx. 25 m filling hose; operating hours: 597 hours; tested and fully functional

Condition: used, axle configuration: 3 axles, first registration: 01/2012, color: other, Year of construction: 2012, Empty weight: 6.690 kg Fedpfx Aoyxrf Aem Togd Axle 1: left 4 mm right 10 mm Axle 2: left 5 mm right 10mm Axle 3: left 10 mm right 12 mm

Condition: new, empty load weight: 135 kg, maximum load weight: 615 kg, overall weight: 750 kg, axle configuration: 1 axle, permissible axle load (axle 1): 750 kg, loading space length: 3,600 mm, total length: 4,645 mm, total width: 1,754 mm, suspension: other, tire size: 155/70 R13, maximum speed: 100 km/h, trailer brake: trailer unbraked, Year of construction: 2025, Single-Axle Trailer 750 kg (Payload approx. 600 kg) For jet ski transport or boats up to 3.6 m in length Manufacturer: Thomas Trailers BT-750-JET Brand-new trailer, 2-year manufacturer's warranty First registration: 3 years TÜV 100 km/h road approval* Registration documents (COC certificate and 100 km/h manufacturer's certificate) Fedpfx Amsx Uq Dij Togd Available immediately! Financing available! Delivery at an additional charge! Welded, hot-dip galvanized frame Paint finish in ANTHRACITE GREY KNOTT rubber suspension axle, adjustable position WPS version – waterproof and maintenance-free wheel hubs Tyres 155/70R13 on steel rims Padded support boards, 180 cm length, adjustable KNOTT strap winch, adjustable 4 lashing eyes, adjustable position Jockey wheel 13-pin electrical connection LED lights, side hinged, waterproof LED position lights white/red Plastic mudguards Technical data: Gross vehicle weight: 750 kg Unladen weight: approx. 135 kg Payload: up to 615 kg Drawbar load: 50 kg Total length: approx. 4645 mm Overall width: approx. 1754 mm Width between mudguards: approx. 1355 mm Frame width: approx. 1235 mm Aluminium rims + EUR 200.00. Trailer available immediately. Delivery possible for an extra charge! Trailer also available in other colours. Offer price incl. 19% VAT. Unbraked boat trailers with 500 kg and 750 kg available straight away. Braked trailers from 1,300 kg to 2,500 kg also available immediately. Offer and further information on request: Office Tel. +49 (0) 2254/83718-20 Specifications subject to change, errors and prior sale excepted. Pictures may show optional equipment at extra cost. *Please observe national legal requirements regarding weight and speed restrictions.

Condition: ready for operation (used), Allen Bradley 2711P-RDB12C Panelview Plus 1250 Colour Key/Touch Display Module Ser D SN: 41269120, used, slight signs of wear, 100% functional, scope of delivery as per photos Fjdpfxercun Io Am Tsgd

Condition: used, Year of construction: 2021, operating hours: 538 h, functionality: fully functional, machine/vehicle number: 0503330621, total width: 920 mm, total length: 1,550 mm, total height: 1,300 mm, pressure: 2,000 bar, operating pressure: 2,000 bar, fuel: diesel, overall weight: 725 kg, water tank capacity: 53 l, volume flow: 6 m³/h, noise level: 89 dB, power: 37 kW (50.31 HP), pump capacity: 10 l/min, Equipment: type plate available, used machine – fully functional – standard accessories available as optional extras Fgsdpfx Aszizicsm Tsd

Condition: good (used), axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 03/2020, loading space length: 13,490 mm, loading space width: 2,480 mm, loading space height: 2,640 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385 / 65 / R22.5, wheelbase: 8,730 mm, color: red, Year of construction: 2020, Axle configuration Tyre size: 385 / 65 / R22.5 Make axles: Schmitz Brakes: disc brakes Suspension: air suspension Fgjdozf Uu Rjpfx Am Tod Rear axle 1: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Weights Empty weight: 6.791 kg Carrying capacity: 26.209 kg GVW: 33.000 kg Functional Make of bodywork: Schmitz Ferroplast Maintenance, history and condition Number of owners: 3 APK (MOT): tested until 10/2026 Technical condition: good Visual appearance: good Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: like new (used), Year of construction: 2020, operating hours: 250 h, functionality: fully functional, 1.1 TECHNICAL DATA 1 x Waterjet cutting machine, NCP 4020 D 1 x FANUC 31iB d 1 x IGEMS Professional 1 x BevelJet cutting heads for AWJ abrasive waterjet cutting 1 x Fixed cutting heads for AWJ abrasive waterjet cutting 2 x SM3000 feed systems 1 x KMT, Jetline 50 HP, 3.8 l/min, 4100 bar 1 x Cooling unit control cabinet 1 x Hose reel with spray nozzle 1 x Tool kit 1 x Machine zone safety guard 1 x PanelOne HMI operator interface "EDGECUT" 1 x Remote control for high-pressure pump 1 x Remote maintenance system 2 x Diaphragm pumps and 2 x extraction units 1 x Waste container 1000 l 1 x Pressure vessel 200 l or 2-ton abrasive online conveyor/online abrasive hopper 1 x Head protection package (zero-point measurement head 1) 1 x IGEMS 5X CAM 1 x MPG, portable handheld pendant 1 x Rotary unit SS (chuck 240 mm) Price €21,000 1.1.1 MACHINE DATA Table size (W x D): 4200 x 2275 mm - Machining area (W x D): 3980 x 2010 mm - X-axis travel 2D: 3530 mm - X-axis travel 3D: 3220 mm - Y-axis travel 2D: 2010 mm - Y-axis travel 3D: 1405 mm - Z-axis travel: 250 mm - Positioning accuracy (X/Y): +/- 0.050 mm/m - Repeatability (X/Y): +/- 0.025 mm - Rapid traverse (X-axis): 30,000 mm/min - Rapid traverse (Y): 15,000 mm/min - Rapid traverse (Z): 5,000 mm/min - Minimum distance between nozzles: 450 mm - Maximum distance between nozzles: 2,010 mm 1.2 CONNECTION DATA 1.2.1 MACHINE CONNECTION • Electrical connection: 3 x 400 V+PE, 16 A, 50 Hz • Pneumatic supply volume (incl. pressure vessel): 500 l/min • Pneumatic supply pressure: min. 6.5 bar 1.2.2 HP PUMP DATA/CONNECTION HP pump data: - KMT 50, Jetline, 4100 bar Fgodpfjxgua Aex Am Tjd - 37 kW, circuit breaker at 400/50 Hz, 80 A CAD/CAM software: - IGEMS Professional

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, 1. Waterjet cutting system with accessories, year of manufacture 2005, machine number: 95 246, Model 4060D, including: 2. Machine details: - NC 4060 D (Duplex with 6 cutting heads for abrasive cutting) - 1 x cutting table: 4200 x 6700 mm - X-axis travel: 2750 mm - Y-axis travel: 6470 mm - Z-axis travel (height): 250 mm - Positioning accuracy (X/Y): +/- 0.075 mm/m - Repeatability (X/Y): +/- 0.05 mm - Feed rate X: 10,000 mm/min - Feed rate Y: 10,000 mm/min - Feed rate Z: 4,000 mm/min Technical specifications: - 1 x Fanuc GE 300 i (NANO CNC) SYSTEM Control functions Fgjdpfx Ajxgumcem Tjd • 15-inch color LCD display (resolution 1024 x 768) • Machine control panel • 1.5 GHz Pentium III processor • Vertical and horizontal soft key bars • Slim operator panel with QWERTY keyboard • 40 GB program storage (hard disk) • 2 MB RAM for part programs • Windows 2000/XP operating system • Hand-held control unit (remote control) for easy axis positioning – 1 x MPG unit – 6 x WJS standard cutting heads mounted on holders (2 x 3 pieces) – 6 x SM 3000 abrasive metering units – 1 x IGEMS Standard or Professional – 1 x documentation – 2 x abrasive storage tanks, 1,500 l each – 1 x sludge removal system, 3 x diaphragm pumps – 1 x wastewater tank 1,500 l – 1 x cascade tank – 1 x new stainless-steel cutting tank (4 x 6.7 m) - 10 m high-pressure hoses with fittings - 1 x KMT high-pressure pump, 100 HP, 4,100 bar, only 9,500 operating hours - Installation and maintenance by WJS personnel Machine connections: Electrical connection: 3 x 400 V+N+PE, 25 A, 50 Hz Compressed air supply: 600 l/min Air pressure (technically dried): 6.5 bar

Condition: reconditioned (used), Year of construction: 2017, operating hours: 1,651 h, functionality: fully functional, machine/vehicle number: G393, operating pressure: 500 bar, total length: 1,175 mm, total height: 945 mm, total width: 760 mm, pressure: 500 bar, type of input current: three-phase, empty load weight: 290 kg, input voltage: 400 V, power: 15 kW (20.39 HP), input current: 32 A, noise level: 78 dB, pressure (max.): 500 bar, input frequency: 50 Hz, water pressure: 500 bar, Dear Sir or Madam, For sale is an overhauled Falch WheelJet 15 Electric without accessories. 500 bar 15 l/min Fodpjxugifsfx Am Tsgd 32A plug Best regards, STS-Reinigungstechnik Team

Condition: used, mileage: 3,52,000 km, power: 380 kW (516.66 HP), first registration: 02/2021, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 02/2027, brakes: retarder, color: green, gearing type: automatic, emission class: euro6, Year of construction: 2021, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Special equipment: Axle load – measuring device, front axle load 9.0 t, work lights, work lights on the upper rear wall of the cab, external mirror on the right with maneuvering position, battery 220 Ah, CB radio, air horn, cab: steel-sprung, comfort, suspension: front springs 9.0 t, 4 leaves, speed limiter, transmission 16-speed - type: G 280-16, electric tilting roof, rear axle bevel gear 300, interior filter for construction vehicles, fuel tank: 290 liters, aluminum, left, cooling capacity for hot climates, air compressor 2-cylinder, mounting plate / saddle plate 40 mm for fifth wheel coupling, mounting plate / saddle plate 40 mm for fifth wheel coupling 20 t, reinforced engine brake, reinforced engine mounting, auxiliary drive MB 131-2c, configurable special module, frame lowering without bellows residual pressure control, frame overhang 750 mm, smoker's package, retarder, reversing warning sound (external warning signal), fifth wheel coupling: manually lubricated, disc brakes with partial protection, interface for fleet management system, seat cover / upholstery: co-driver seat velour, seat cover / upholstery: driver seat velour, seats in the cab: driver's seat, comfort suspended seat, sun visor external, sun protection roller side window, driver's door, 12V / 15 A socket in the co-driver's footwell (additional), 24V / 25 A socket in the co-driver's footwell, steep shoulder rims 11.75x22.5 (on front axle, reinforced), door extension for the cab, preparation / switch for lift axle on trailer / semitrailer, additional thermal insulation, auxiliary heater (water), twin-plate clutch Additional equipment: Emission standard EURO 6, axle configuration: 6x4, heated approach / front mirrors, trailer socket 24V / 15-pin, Arocs 5, step on cab left, cockpit multimedia, compressed air connection in the cab, compressed air tank steel, compressed air unit with condensate monitoring, compressed air unit medium, automatic activation for driving lights (light sensor), cab: hydraulic tilting device, cab: L StreamSpace, 2.30 m, tunnel 170 mm, electric windows, vehicle without rear window, generator 100 A, urea tank (AdBlue): 60 liters, body / superstructure: semi-trailer tractor, comfort locking system, fenders 3-piece, steering assistance pump unregulated, steering wheel with multifunction, steering oil cooler, air intake behind the cab, heated air dryer, engine 15.6 liters - 380 kW R6 diesel (OM 473), engine variant OM 473, type of use: short-distance transport, wheelbase not defined, wheelbase variant 3300 mm, ramp mirrors, waste heat utilization, disc brakes front and rear axle, key with remote control (2), side marker lights LED flashing, seats in the cab: co-driver functional seat, steel rims 9.00x22.5, 12V socket in the co-driver's footwell, bumper corners front in steel design, tachograph / EC control unit, Truck Data Center 7 (fleet management system), turbocompound, preparation for toll collection, preparation Truck Data Center (fleet management system), front axle straight, permissible total weight 26.0 t, oil cooler transmission Fsdszgt S Rjpfx Am Togd

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 03/2015, loading space length: 13,320 mm, loading space width: 2,500 mm, loading space height: 2,650 mm, total length: 14,000 mm, total width: 2,600 mm, total height: 4,000 mm, suspension: air, tire size: 385/65-R22.5, wheelbase: 8,910 mm, Year of construction: 2015, Equipment: ABS, = Additional Options and Accessories = - EBS - Rear doors Fjdpfx Amszb Ibqo Togd - Refrigeration/freezer unit - Air suspension - Disc brakes = Notes = 2015 Schmitz refrigerated semi-trailer with ABS/EBS, SCHMITZ/ROTOS axles with disc brakes, CARRIER VECTOR 1950 D/E (diesel operating hours: 13,595 h / electric operating hours: 2,258 h), aluminum floor, internal dimensions: 13.32 x 2.50 x 2.65 m, tires 385/65-R22.5 on new rims (tread depth left: 6/8/7 mm; tread depth right: 7/7/7 mm), unladen weight: 8,713 kg, permissible total weight: 42,000 kg, Dutch registration with valid technical inspection (APK) until 03.09.2026 = Further Information = Axle configuration Tire size: 385/65-R22.5 Axle brand: ROTOS/SCHMITZ DISC Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Max. axle load: 9000 kg; tire tread depth left: 40%; tire tread depth right: 45% Rear axle 2: Max. axle load: 9000 kg; tire tread depth left: 50%; tire tread depth right: 45% Rear axle 3: Max. axle load: 9000 kg; tire tread depth left: 45%; tire tread depth right: 45% Weights Unladen weight: 8,713 kg Payload: 33,287 kg GVWR: 42,000 kg Functional Cooling: 25 °C to 29 °C Body brand: Schmitz Cargobull SCB*S3B Refrigeration engine: Diesel and electric (13,595 diesel operating hours; 2,258 electric operating hours) Wall thickness: 50 mm Maintenance, History and Condition APK (Technical Inspection): valid until 09/2026 Technical condition: good Optical condition: good Identification License plate: ON-43-RR Additional Information Please contact Arne Honingh for further information.

Year of construction: 2014, operating hours: 30,000 h, condition: used, functionality: fully functional, machine/vehicle number: 20526471, Laboratory Twin Screw Extruder – Coperion ZSK 26 Mc18 (40 L/D) with a 26 mm screw diameter Featuring all the characteristics of the ZSK Mc18 series, this extruder is ideal for formulation development and compound sampling, as well as for manufacturing small compound batches of up to approximately 180 kg/h. Compared to the previous model ZSK 26 Mc, the new laboratory extruder enables throughput increases of up to 100%, owing to the torque having been increased to 15 Nm/cm³. The extruder is mobile and space-saving as the control cabinet is integrated into the machine’s base frame. Heating and cooling systems are installed and operational (plug & play). Machine No.: 20526471 Year of manufacture: 2012 Operating hours: approx. 30,000 h Condition: Used, in operation Technical specifications: Extruder type: Twin screw extruder Model: ZSK 26 Mc18 Process length: 40 L/D Drive power: 36.9 kW Power supply: 3 × 400 V (−10 % / +6 %), 50 Hz ±2 % Barrel configuration: E-0-0-S-0-0-1-0-V-0 Fgjdpfxeyhd Dbe Am Tsd Output: approx. 150–200 kg/h, depending on formulation, raw material, and required product quality Applications: Highly filled compounds, masterbatch applications Suitable for processing: LLDPE, LDPE, HDPE, PP, PPR, PS, ABS, PET, and biopolymers Scope of delivery Gravimetric feeding system: - K-Tron gravimetric feeders - 1 × pellet feeder - 1 × powder feeder (twin screw design) Side feeding / degassing: - 1 × side feeder ZS-B25 - 1 × vacuum side degassing unit ZS-EG25 Vacuum system: Busch vacuum pump Plastex MI 0120 B 222 CNX6, specifically designed for PET applications. Please note: Vacuum pump is not included. Process monitoring: - Melt pressure sensor system - Melt temperature sensor system - PLC integration Pelletizing system (strand pelletizing): - Air dryer unit not included - Strand pelletizer SP50 - Water bath Peripheral equipment: - Bag emptying station for pellets - Conveying system to the feeders Spare parts: - Spare parts included, second screw set.

Condition: as good as new (ex-display), Hot water and steam high-pressure trailer, like new with 200 hours, complete with high- and low-pressure hoses, guns, lances, and nozzles. Fgodpfx Ajyvv Rkem Ted

Condition: new, maximum load weight: 750 kg, axle configuration: 2 axles, loading space length: 2,641 mm, loading space width: 1,256 mm, Year of construction: 2024, The KIPP trailer Garden Trailer 264/2 with jockey wheel, H-1100 frame and gray tarpaulin is a single-axle trailer with a maximum permissible total weight of 750 kg. The trailer can be opened or removed to make loading and unloading easier. Fgodpfx Astr E Rijm Tjd Trailer with frame and gray tarpaulin Garden Trailer 264/2 KIPP The GARDEN TRAILER 264/2 trailer with frame and gray tarpaulin is a two-axle trailer with a maximum permissible gross weight of 750 kg . To make loading and unloading easier, the trailer has the option of opening or removing the rear. An additional advantage of the trailer is that it can be tilted, which makes it easier to unload loose goods. The trailer has a frame with a gray H-1100 tarpaulin that protects the transported loads. We take care of all the formalities surrounding the purchase for you. We will deliver the ordered goods together with the enclosed documents to the address you specify within a few working days. Once you have received the trailer, all you have to do is register it to be able to use it in full. GARDEN TRAILER 264/2 KIPP - Trailer for transporting materials with two axles. The jockey wheel makes it easy to maneuver the trailer without a connection to the car. The H-1100 frame with gray cover protects your goods from the weather and enables safe transport even in rain or strong sunlight. The cover also creates additional space, allowing you to transport more goods. The trailer's durability is ensured by a support frame made of high-strength structural steel and a transport surface made of 9 mm thick waterproof plywood. Technical data of the KIPP trailer GARDEN TRAILER 264/2 CHASSIS - 2 axles from the manufacturer Knott or ALKO . Wheel dimensions: 155/70 R13. V-shaped drawbar. Suspension: independent suspension, torsion shaft springs. Wheels outside the load compartment. BODY - Support frame: Mild steel, bolted, cold-bent galvanized sheet . Transport surface: The floor is made of waterproof, non-slip plywood, 9 mm thick. SIDES - made of galvanized sheet steel, thick and stable. The rear wall opens. H-1100 frame with gray tarpaulin - a solid frame and a thick and durable tarpaulin, tear-resistant.

Condition: new, empty load weight: 130 kg, maximum load weight: 620 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,304 mm, loading space width: 1,256 mm, loading space height: 1,100 mm, tire size: 13, wheelbase: 155 mm, Year of construction: 2024, Equipment: trailer coupling, SHIPPING IS POSSIBLE TO GERMANY, AUSTRIA, FRANCE, ROMANIA, ITALY, IRELAND, BELGIUM, THE CZECH REPUBLIC, DENMARK, AND THE NETHERLANDS. Fjdpsir H R Nofx Am Togd UT004188 The UNITRAILER Garden Trailer 230 TIPPING transport trailer is the latest product from UNITRAILER. It is currently our largest car trailer with a GVWR of up to 750 kg. The trailer has a folding tailgate, which allows for loading and unloading in just a few minutes. By using a tilting drawbar, it can be placed vertically against the rear wall. We will take care of all formalities associated with the purchase for you. When ordering a car trailer, please specify the GVWR of the vehicle that will be towing the trailer. You can find information on the permissible total weight on the last page, under the information in the vehicle registration document. Technical data of the Garden Trailer 230 TIPPING car trailer CHASSIS - Steered axle from Knott or AL-KO – special orders available on request from Unitrailer. Wheel size: 155/70 R13. Tilting V-drawbar that can be folded under the trailer floor at any time. BODY - Load-bearing frame made of hot-dip galvanized sheet steel. Curved profiles were used with screws. Loading area: non-slip, water-resistant screen-printed plywood, 9 mm thick. SIDE WALLS - all side walls are made of galvanized steel. Rear side wall folds down. Delivery costs will be charged separately.

Condition: new, * IMMEDIATELY AVAILABLE * Includes pendulum tailgate / Tridem / Double hydraulics / Steel side panels TECHNICAL DATA • Brand: Brian James • Model: Tipper 526 Fjdpfx Amjx Tcfij Tjgd • Vehicle type: Rear tipper • Vehicle condition: New vehicle • First registration: None • MOT/Inspection: 2 years from first registration • Internal dimensions (LxWxH): 400 x 200 x 30 cm • External dimensions (LxWxH): 530 x 211 x 102 cm • Platform height: 71 cm • Gross vehicle weight: 3,500 kg • Unladen weight: 1,200 kg • Payload: 2,300 kg • Chassis: High loader (wheels under body) • Tyres: 195/60R12C • Suspension: ALKO rubber torsion axle • Jockey wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Steel side panels • Click & Clamp: The new "Click & Clamp" system for maximum strength and rapid addition/removal of various optional side panels and accessories • Automatically adjustable stanchions and clamped side panels ensure smooth travel without unwanted rattling • Robust built-in latches on all side panels • All side panels foldable and removable • Removable steel corner stanchions • Socket mounts on all 4 corners for tarp frames, mesh extensions, side panel extensions, or front panel extensions • Welded-on net hooks under the platform • Sturdy, rattle-free tension latches on side panels • Galvanized steel sheet on multiplex flooring • Reinforced, solidly bolted V-drawbar • Very robust welded steel frame • Frame completely hot-dip galvanized • Multiple cross members for high point load capacity • Additional continuously welded longitudinal beams • 8 recessed lashing points inside the floor (1000DaN/kg), TÜV certified! Covered with spring steel plates beneath • Swinging rear tailgate on hot-dip galvanized steel • U-profile at rear for easy ramp attachment • Integrated ramp slots for optional loading ramps • Twin heavy-duty 4-stage XL hydraulic cylinders • Electric hydraulic pump with battery (12V/90AH) • Detachable remote control for electric hydraulics • External battery charging socket for optional 230V charger • Battery trickle charge: Battery is charged via the vehicle's ignition when the engine is running (depends on towing vehicle) • Battery charge status display • Battery master switch • Maintenance support bar under the platform for service work • ALKO rubber suspension axles • Automatic reversing mechanism • ALKO overrun device and parking brake • Cast steel coupling head with integrated ALKO high-security lock • Tool/storage box mounted on the drawbar • Spare wheel at the rear of the trailer • 13-pin connector • Reversing lights • Complete LED lighting: Extremely bright, durable, and reliable • Dynamic LED indicators • Integrated rear fog light • Various marker lights front, side, and rear • Rear frame lighting recessed • Heavy-duty jockey wheel • 5-year chassis warranty Additional accessories can be retrofitted – please enquire! New vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery available - All prices include VAT - Vehicle registration document can be sent in advance, or export plates (Germany) can be provided - Export plates including customs clearance possible Descriptions and images are copyright protected! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg - Errors, omissions, and prior sale excepted -

Condition: ready for operation (used), Allen Bradley 2711P-RDB12C Panelview Plus 1250 Colour Key/Touch Display Module Series D, SN: 41269093, used, minor signs of wear, 100% functional, delivery as shown in photos. Fjdpfxex Eqtxe Am Togd