Used Fasti 136-20-4.5 for sale (30,041)

Year of construction: 2000, condition: ready for operation (used), overall weight: 2,110 kg, sheet thickness (max.): 5 mm, working length: 2,040 mm, Plate rolling machine manufactured in 2000. This FASTI 136-20-4.5 features a capacity of 2040 x 4.5 mm at 400 N/mm² tensile strength and weighs 2110 kg. It is equipped with a Fasti-Matik 5 R control unit and operates at 400 V. If you are looking to get high-quality plate rolling capabilities, consider the FASTI 136-20-4.5 machine we have for sale. Contact us for further details. - Capacity: 2040 x 4.5 mm (at 400 N/mm² Tensile Strength)- Weight: 2110 kg- Control Unit Model: Fasti-Matik 5 R (FM 5 / FM 5 R)- Operating Voltage: 400 V (3/N/PE~)- Frequency: 50 Hz- Control Voltage: 230 V AC / 24 V DC / 24 V AC- Connected Load: 6.356 kW- Nominal Current: 15.7 A- Circuit Diagram No.: 10X0001 B- Included Equipment: Control unit operating manual, machine instruction handbook- Working Hours: estimated as very low- Saving programs to the 3.5-inch floppy drive does not work (no access). It may be possible to replace it, though or the values must be entered manually. Ibedpfx Aozi S U Aeiyjb

Condition: used, functionality: fully functional, Year of construction: 1984, Equipment: documentation/manual, type plate available, Crank-driven plate shear Manufacturer: Fasti, Type: 507 – 20 - 3 Year of manufacture: 1984 Technical data Manufacturer: FASTI Type: 507 – 20 - 3 Year of manufacture: 1984 Sheet metal width: 2040 mm Sheet metal thickness: 3.00 mm Overhang on the stand: 100 mm Number of strokes: 65 Motor power: 7.5 kW Dimensions: L 2.65 x W 1.20 (plus 0.8 m support arms) x H 1.3 m Weight: 2.1 t Equipment - Rear stop, 500 mm, manually adjustable - Adjustable clamping pressure Ijdpfxozpxdqe Aiyjbb - Angle stop - Support arms - Manual adjustment of the cutting clearance!!! - 4 x spare blades (2 x top blades / 2 x bottom blades) - Documentation All information is subject to change without notice. A demonstration is possible at any time in our showroom.

Condition: good (used), functionality: fully functional, Year of construction: 1994, Hydraulic Swivel Bending Machine Manufacturer: FASTI, Type: 212 – 20 – 6 Year of Manufacture: December 1993 / January 1994 Technical Data Manufacturer: Fasti Type: 212-20-6 Year of Manufacture: December 1993 / January 1994 Useful length: 2040 mm Sheet thickness: 6 mm Ibodpfxez Aqx Ts Aiyjb Stroke: 500 mm Connected power: 12.42 kW Voltage: 400 V Number of phases: 3 Control voltage: 230 V AC // 24 V DC Rated current: 16.5 A Mains frequency [Hz]: 50 Installation dimensions: L 3.30 x W 2.80 x H 2.30 m Weight: approx. 6 t Equipment - Bending angle adjustment using a potentiometer and digital display - Sheet thickness adjustment (bending flange) using a push button and digital display - Controlled rear stop, 1000 mm with ball bearings, extendable to 1500 mm - 2 x sharp edge rails, 45° - 1 x sharp edge rail, 30° - Bending rails 16, 35, 10, 12, 15 mm - Gooseneck rail H 130 mm, segmented All information is without guarantee. The machine is characterized above all by its very simple operation. A demonstration is possible at any time in our showroom.

Condition: ready for operation (used), Year of construction: 1990, control type: manual, degree of automation: manual, working width: 2,050 mm, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, back gauge adjustment: manual, back gauge: 800 mm, power: 7.5 kW (10.20 HP), overall weight: 1,800 kg, total length: 2,850 mm, total width: 2,350 mm, total height: 1,600 mm, cutting length (max.): 2,050 mm, throat depth: 300 mm, Guillotine shear, cutting length 2050 mm, cutting capacity 3.25 mm, throat 200 mm, motor 7,5 KW, working high 800 mm, back gauge 800 mm manual, dimension 2850x2350x1600 mm, weight ca. 1800 kgs Ijdpfezy Nlyex Aiyjbb

Condition: used, functionality: fully functional, Year of construction: 1983, Hand-operated swiveling bending machine Manufacturer: FASTI, Type: 205, 1020 x 2 mm Year of manufacture: 1983 Technical data Ijdpfsz Ah Apsx Aiyebb Manufacturer: Fasti Type: 205 Year of manufacture: 1983 Usable length: 1020 mm Sheet thickness: 2 mm Stroke: approx. 200 mm Dimensions: approx. L 1.70 x W 0.50 x H 1.60 m Weight: approx. 750 kg Equipment - Swiveling upper die - Stroke approx. 200 mm - Various bending rails as shown in the photo All information is subject to change without notice. A demonstration can be arranged at our showroom at any time.

Condition: like new (used), Year of construction: 2023, operating hours: 1 h, actuation type: manual, working width: 2,030 mm, back gauge: 750 mm, Equipment: documentation/manual, type plate available, Panel shear, like new, unused. The machine was delivered by Schröder in January 2023 and put into operation. Since it was unsuitable for the intended application (see photos), it was subsequently stored and is in absolutely new condition. The new price was €12,381 (excluding transport + assembly). Manufacturer: SCHRÖDER Type: HS 2000 x 1.25 Year of manufacture: 2023 Usable length: 2,030 mm Cutting capacity at 400 N/mm2: 1.25 mm Equipment: - Rear stop 750 mm, digital display, adjustable at the front - Hold-down device 750 mm Ibodpfx Aijzl A Raeyjb - Stainless steel blade - Clamping beam with hard rubber strip - Front support table, extendable - Angle stop right + left - Sliding carriage

Condition: good (used), Year of construction: 1987, Motorized folding machine Fab. FASTI Typ. 213-20-10 year 1987 Technical data Make: Fasti Type: 213-20-10 Year of construction: 1987 Effective length: 2040 mm Sheet thickness: 10 mm Stroke upper beam: 500 mm Lower beam stroke: 80 mm Dimensions: approx. L 4.40 x W 2.00 x H 2.40 m Weight: approx. 8 tons Equipment - Central lubrication - Bending beam drive on both sides - Potentiometer with digi-display for bending angle Ibodpfx Aioum Ttzjysb - Bending rail 35 mm - Focusing rail 45° All data without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Condition: good (used), Year of construction: 1991, machine/vehicle number: 91212035, Offer 26016 Technical data: - max. working width 2040 mm - max. material thickness at 40 kg/mm² tensile strength 4 mm - bending angle adjustable electronically, preselectable 0 - 135° - automatic sequential control for a complete working process - largest opening width / stroke of the upper beam 350 mm - height adjustment: - of the upper beam 100 mm - of the lower beam 100 mm - upper beam drive 400 V / 4 kW - bending beam drive 400 V / 4 kW - accessories: - motorized bending beam adjustment - rear stop adjustable with handwheel - electric foot pedal - space requirement with rear stop: Isdpfx Aezgu Tisiyobb - approx. W 3200 x H 1650 x D 2100 mm - weight approx. 4500 kg

Condition: used, functionality: fully functional, Year of construction: 1989, machine/vehicle number: 204-10-2, Sales only within EU member states! No private sales. Any warranty is excluded. Ibodpfx Ajzibtnsiysb We assume no liability for the accuracy of the technical data and year of manufacture, for the completeness of accessories and tool equipment, or for compliance with all safety and environmental protection requirements mentioned in the accident prevention regulations.

Condition: used, Year of construction: 1961, sheet width 1020 mm Ibsdezfax Iepfx Aiyeb plate thickness 2 mm

Condition: used, Year of construction: 1985, Max. bend length: 1020 mm Max. Sheet thickness: 2 mm steel Ibsdpfxezvw S To Aiysb Good condition Weight: 400 kg

Condition: used, Year of construction: 1983, Max. bend length: 1640 mm Max. sheet thickness: 3 mm steel Manual and automatic bending process possible Bending angle adjustable via potentiometer Hub height of the upper gantry and material thickness adjustable via switch Isdpozvw Rpjfx Aiyjbb Manual backgauge with spring fingers Weight: approx. 1600 kg

Condition: good (used), Year of construction: 1993, machine/vehicle number: 93212004, Offer 26084 Technical Data: - Maximum working width: 2040 mm - Maximum material thickness at 40 kg/mm² tensile strength: 4 mm - Bend angle adjustment: electronically pre-selectable, 0 - 135° - Automatic sequence control for a complete work cycle - Maximum upper beam opening/clamping stroke: 350 mm - Height adjustment: - Bending beam: 100 mm - Lower beam: 100 mm - Upper beam drive: 400 V / 4 kW - Bending beam drive: 400 V / 4 kW - Bending beam adjustment - Back gauge adjustable via handwheel - Electric foot switch - Space requirement with back gauge: approx. W 3200 x H 1650 x D 2100 mm Ibedpfxoy Em Dge Aiyob - Weight approx.: 4500 kg

Condition: used, Max. bending length: 2040 mm Max. sheet thickness: 4 mm steel Max. upper cheek stroke: 350 mm Manual and automatic bending process possible Ibedpfx Aisx Ebt Toyjb Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via dip switch Bending rail in top condition Manual backgauge with spring fingers 4000 kg

Condition: used, Year of construction: 1986, sheet width 2040 mm plate thickness 4,0 mm distance between columns 2100 mm roll diameter 150 mm total power requirement 7,0 KW Iedpfx Asy Ezzyoiyjbb weight of the machine ca. 2,2 t dimensions of the machine ca. 2,95 x 1,0 x 1,75 mm Sheet metal bending machine with 3 rollers - 2 driven rollers - Rear roller electrically adjustable - Conical bending - Foot switch - Emergency stop device

Condition: used, Max. bending length: 2040 mm Max. sheet thickness: 3 mm steel Manual and automatic bending process possible Ijdpfsxz Emvjx Aiyjbb Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via dip switch Manual backgauge with spring fingers Weight: approx. 2300 kg

Condition: ready for operation (used), Swivel bending machine / Motorized FASTI Type 212-3 - Max. bending capacity: 1520 x 4.5 mm - Max. bending angle: 135 - 140 degrees - Foot switch - Emergency stop - Backstop - Control cabinet Dimensions (L x W x H): 2.5 x 1.5 x 1.7 meters / Weight: 3500 kg Ijdpfx Asz Akw Aeiyjbb Errors and omissions excepted.

Condition: used, Max. cutting length: 2040 mm Max. sheet thickness: 2 mm steel Manual rear stop up to 500 mm Side stops and table extensions Iodpfeukhnnjx Aiyjbb knife sharpened 1900 kg

Condition: excellent (used), Bending length: 1020 mm Bending capacity: 2 mm Stroke of the upper beam: 220 mm Adjustability of the lower and bending beams: 60 mm each Total weight: approx. 0.5 tons Equipment: Ibsdpfezr Nthex Aiysb - Finger stop scale, pinion and rack, adjustment range from 0 – 600 mm - Weight compensation for the bending beam

Condition: used, Year of construction: 1982, Technical details: sheet width: 1500 mm Isdpju Ibzwsfx Aiysbb plate thickness: 1,5 mm distance between columns: 1760 mm knife length: 152 mm bending angle max.: 160 ° total power requirement: 1,3 kW Weight approx.: ca. 800 kg dimension machine approx.LxWxH: 2,5x0,7x1,5 m - adjustment of the upper cheek 350mm - adjustment of the bending cheek / lower cheek 60/60 motoric - bending edge up to max. 10mm radius - without back gauge - upgrade possible -manual counter - foot pedal (pedal left/right) accessories: - 1 set tools *

Condition: used, Max. bending length: 2040 mm Max. sheet thickness: 6 mm steel Upper beam stroke: 350 mm Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via dip switch Ibsdey T H N Sepfx Aiyob Mechanical adjustment of the bending arm with digital display (setting of sheet thickness) Manual rear stop with spring fingers up to 1500 mm 5700 kg

Condition: new, bending length: 2050sheet thickness: 4.5upper roll diameter: 140 Technical specifications: - Back roll with motor - Cone bending device - Hardened and polished rolls - Body is made of St 52 steel - Main motor with brake system - Top and bottom rolls are driven bybrake electric motor, gears and gearbox system - Portable control panel  - Cast iron body - Movement of the back and lower rolls up and down manually Ibjdpfx Aod Ab Nueiyob - In acccordance with CE norms Options: - Back roll powered by electric motor EURO 1.260,-- - Digital readout for displaying position of the backroll EURO 1.010,-- - Hardened rolls EURO 1.489,-- - Special voltage EURO 480,-- - Material feeding table - Lower roll is powered by electric motor We have many references!

Condition: excellent (used), sheet width 1270 mm plate thickness 1.75 mm ST plate thickness 2.00 mm ALU plate thickness 2.50 mm KU thickness at "Niro-steel" 0.80 mm distance between columns 1300 mm daylight opening OW ~ 380 mm work height max. 900 mm adjustment UW 60.0 mm bending angle max. 180 ° weight ca. 200 kg kg range L-W-H 2000 x 520 x 1500 mm good condition (!!) Bending splint e.g. reground Furnishing: - robust, manual folding machine - manual lifting by hand lever (incl. gas pressure damper) Ibedpsxaa S Dsfx Aiyeb - manual clamping of the upper beam by means of a handwheel on the side - manual lower beam adjustment - Bending angle fixed stop, with analogue angle display - Upper beam with large opening width - Instructions / description * Machine link : ?machineno=1008-9355182

Condition: used, Year of construction: 1993, Max. bending length: 3240 mm Max. sheet thickness: 2 mm steel Manual and automatic bending process possible Ibodpfx Aijyhqhtoyeb Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via dip switch Bent rail and machine in top condition Weight: approx. 3000 kg

Condition: excellent (used), Three-roll bending machine, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll bending machine, profile bending machine, three-roll sheet metal rolling machine, manual bending machine -Roll bending machine: 3-roll roll bending machine, electrically driven -Bending adjustment: electric -Max. sheet width: 2040 mm -Max. sheet thickness: 4 mm -Roller diameter: 150 mm -Dimensions: 1080/2880/H1370 mm -Weight: 1770 kg Ibodpfx Asywzlpoiysb