Used Flash Off Dryer Ven Dry Oir for sale (12,457)

Condition: used, Year of construction: 2013, machine/vehicle number: A1312006-0030, - Manufacturer Venjakob - Type VEN DRY OIR 38/40 - Year of construction 2013 - Working width 1,300 mm - Working height 940 + - 20 mm - Length of exhaust duct 3,800 mm Ncsdpfx Akjxfkbaofsr - Supply air capacity 100 m³/h - Exhaust air capacity ~ 500- 1000 m³/h - Recirculated air capacity ~ 3,000 m³/h - Max. Drying temperature ~ 30 degrees - Air velocity 0.5 - 2 m/s - IR emitters 12 pcs. - IR heater output 12 x 1.5 kW - Belt conveyor, length 4.000 mm - Location, at the warehouse - El. Power 20KW / 63A - Volt, Hz 400/50 - Voltage fluctuations max. +/- 5 % - Control cabinet with touch screen display

Condition: used, Year of construction: 2012, - Manufacturer Venjakob - Year of construction 2012 Nedpfx Aju Edhujkfocr - Working width 1.300mm - Type. Flash off dryer, VEN DRY Flash Off - Part height max. approx. 120mm - Zone1, paint calming zone with cover hood without air 3,000+300mm - Zone2, flash off zone 10,000mm - Laminar flow dryer in the opposite direction to the parts - Supply air 4,000m³/h - Exhaust air 4.000m³/h - Air volumes adjustable via flaps - Heat output approx. 65 kW - Air speed 2-5m/s - Max. Drying temperature 30°C - Heat exchanger, heating water PWW max. 90/70 degrees - Belt conveyor, length 13,800 mm - Feed speed approx. 2-10m/min, Frequency converter required on site. - Volt, Hz 400 / 50 - Motor power 2.5+1.5+0.75KW - Without switch cabinet - Location, at the Blomberg warehouse

Condition: used, Year of construction: 2007, with light barriers in the inlet area, the dryer only switches on when parts are detected by the light barrier, otherwise the dryer is in energy-savingstandby mode with almost closed mirror halves. Operation via a Siemens panel. - Manufacturer: Venjakob - Type: VEN DRY UV 3D Nedpsu S N R Ejfx Akfjcr - Year of manufacture: 2007 - Operating side: right - Working width: 1.300mm - Max. Part height: approx. 100mm - Number of tubes: 2 pieces - Suitable for mercury and gallium tubes - 3D for edge drying - Tube power max. 120W/cm - Tube power infinitely adjustable 50-120Watt/cm - With standby mode- With belt conveyor - Feed rate: ~ 2.5 - 7.5m/min. - Length: 3,000mm - Bretie: 2.750mm - Total connection ~45KW - Location: in stock - Volt/HZ: 400/50

Condition: good (used), Drying oven, drying cabinet, electrode oven, chamber dryer oven, preheating oven, electrode re-drying, electrode cabinet, electrode heat container Ncodpoyuvp Aofx Akfer -Manufacturer: Norweld, drying oven with isolation transformer -Type: ES 2 -Usable space: Ø 100 x 430 mm -Number: 2x drying ovens available -Price: per piece -Transport dimensions: 520/230/H560 mm -Weight: 14 kg/pc.

Condition: good (used), Drying oven, drying cabinet, electrode oven, chamber dryer oven, preheating oven, electrode re-drying, electrode cabinet, electrode heat container -Drying oven: with isolation transformer -Type: ES 2 -Technical data: unfortunately no longer legible -Usable space: Ø 100 x 430 mm -Transport dimensions: 520/230/H560 mm -Weight: 14 kg Nedpeyuut Hjfx Akfjcr

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, ATTENTION > SPECIAL PRICE UNTIL 28/04/2026 Due to restructuring, we are selling a premium-class automatic screen printing press suitable for ambitious beginners and professionals, consisting of: TAS Textile Printing Press Model 203 RA L (year 2001) incl. spare parts worth approx. €300 - Very good condition / low usage - 10 pallets / 8 colors - Extra large print area: max. 500 x 620 mm - Max. frame size: 660 x 930 mm - Incl. intermediate dryer 9.0 kW (variable use) - Drive type: pneumatic - Pneumatic screen clamping - Central lift-off device - High-quality components from renowned manufacturers installed (e.g. FESTO, EBM Papst, ...) - Two pallet sets - Incl. various squeegees and flood bars Recently, a large portion of the hoses was replaced and one pneumatic cylinder was completely overhauled! Available spare parts: - 3x pneumatic cylinders for screen holders - 1x switch for screen clamping (Bosch) - 1x regulator for squeegee/flood speed (Bosch) - 5x squeegee holders - 1x silencer (Riegler) - Pneumatic hose (Festo) - Various hose connectors (Festo, Riegler) - Various plugs The machine delivers precise printing after proper installation, runs smoothly, and is extremely durable. We are happy to answer any questions! Ncodpfsyrz Edjx Akfjr Note for German customers: There is a German company specializing in these premium machines, which ensures professional maintenance and spare parts supply. The price is NET (excluding VAT)!

Year of construction: 2009, condition: good (used), Drying oven, drying cabinet, electrode oven, chamber dryer oven, preheating oven, electrode re-drying, electrode cabinet, electrode dryer, welding powder dryer, welding electrode stabilizing oven Ncedsx Sw N Hjpfx Akfer -Manufacturer: Gullco, Drying oven electrode dryer welding powder dryer type 125-220 -Nominal temperature: up to 38° - 288°C -Usable space: WDH 250/480/200 mm -Voltage: 220 V -Power: 1000 W -Dimensions: 385/365/H695 mm -Weight: 24.4 kg

Condition: good (used), Drying oven, drying cabinet, electrode oven, chamber dryer oven, preheating oven, electrode re-drying, electrode cabinet -Manufacturer: Küppersbusch, Electrode dryer type SET-4 -Nominal temperature: up to 300°C -Usable space: WDH 140/140/460 mm Ncjdpfsx Ir Trjx Akfer -Voltage: 220 V -Power: 0.9 kW -Contents: see photos -Dimensions: 385/365/H695 mm -Total weight: 19.3 kg

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Information on gas / oil consumption Nedpefz U Hvjfx Akfocr The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Ncodpsy Aurgsfx Akfsr Throughput approx. 0.5-2 t/h depending on material type Drive power 30 kw A total of four dryers of this model are available.

Condition: excellent (used), machine/vehicle number: 11 020 021/10 EU0148, functionality: fully functional, power: 10.2 kW (13.87 HP), Dry air dryer Luxor LS 80 Connected load: 10.2 kW Dry air output: 80 m3/h Heater: 6.5 kW Silos Motan BS 250-LN-0-0+EU1 Volume: 250 L Heater: 2.5 kW Material conveying unit Motan Type: METRO SG HES 80 BT Power: 1.1 kW The technical condition of this system is EXCELLENT!!! Nedpey Exfijfx Akfocr

Condition: excellent (used), machine/vehicle number: 07 021 060/06 0031, functionality: fully functional, power: 9.7 kW (13.19 HP), number of chambers: 1, Dry Air Dryer Luxor LS 50 Connected load: 9.7 kW Dry air volume: 50 m3/h Heater: 6 kW Silo Motan BS 60-L Volume: 60 L Ncodpjy Examsfx Akfor Heater: 1.55 kW Material Loader Motan Type: METRO HES 50-1ANC-AAA-B-A Power: 1.1 kW The technical condition of this system is very good!

Condition: excellent (used), Year of construction: 2011, Dry air dryer FarragTech CARD 10 S with container and 2 x suction conveyors ICEVA GS-4mD Ncedpfxsy Akk Se Akfjr Stock no.: 503577 Machine type / Device type: Dry air dryer Manufacturer: FarragTech GmbH Type: CARD 10 S Year of construction: 2011 Container volume: 10 ltr. Throughput: 2 h / 3.25 kg / 80° ABS Power: 1.1 kW Voltage: 230 Volt Hopper volume: 70 ltr Accessories: 2x suction conveyors ICEVA GS-4mD

Condition: good (used), Year of construction: 2003, inner dimension length: 7,400 mm, inner dimension width: 4,500 mm, inner dimension height: 4,250 mm, number of chambers: 1, Equipment: CE marking, documentation/manual, Drying chamber Manufacturer: Mühlböck Model: ZLSM Year of manufacture: 2003 Internal dimensions approx. 7400 x 4500 x 4250 mm (LxWxH) 3 fans, each 3 kW 10 measuring points With frequency inverter With control system Heating capacity: 223 kW Water temperature: 85 °C Water flow rate: 14 m³/h Nodpsy Evkpefx Akfocr Voltage: 230/400 Volt Connected load: 12 kW Fans: 3 x 3 kW Control system: MB Intellevent 5000 program The unit was previously connected to a central heating system. Central heating system not included! Drying chamber will be professionally dismantled and loaded onto a truck.

Condition: used, Year of construction: 2005, inner dimension length: 14,000 mm, inner dimension width: 1,250 mm, inner dimension height: 1,850 mm, total length: 15,900 mm, total width: 2,500 mm, total height: 3,000 mm, overall weight: 12,000 kg, Equipment: CE marking, No. 3262 Ncjdpfx Akjyy R D Tjfer Vacuum dryer / drying chamber Kronseder KCT 2400 Used, year of construction 2005 The machine was in operation until 2024 and remains connected to electricity and hot water until July 2026 Capacity approx. 32 m3 Heating via hot water Stainless steel chamber Chamber diameter approx. 2000 mm External length of chamber approx. 15000 mm Internal length of chamber approx. 14000 mm Width of wood stack 1250 mm Height of wood stack 1850 mm Transport dimensions approx. 15900 x 2500 x 3000 mm LWH Weight approx. 12000 kg Sale on behalf of customer, ex location near 34125 Kassel, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Throughput approx. 0.5-2 t/h depending on material type Ncedpfx Aeyywf Rekfer Drive power 30 kw

Condition: used, Year of construction: 2018, functionality: fully functional, The dry air dryer from Koch is up for sale. Below are some technical details: - Designed for 135 kg/h for 7 machines - NEW PRICE of the system: €115,000 Model: CKT 500F, frequency-controlled version - 500 cubic meters/hour dry air - Touch panel control expansion for CKT/EKO dryers - Control system expansion integrated as a conveying system in CKT/EKO dryers, up to 16 points of demand - Containers: 1 x 200 liters; 4 x 150 liters; 2 x 60 liters, with cleaning door - Koch hopper heaters at 3 kW, 5 units - Koch hopper heater at 1.5 kW, 2 units - V2A extraction containers, 7 units - Stationary frames, 2 units - Economy system control for gentle material drying and maximum energy savings - Empty suction valves NW 40, double empty suction, 7 units - And much more... Nsdpfx Aksy Amr Esfscr

Condition: ready for operation (used), We are selling a high-end conveyor dryer from the premium segment, suitable for ambitious beginners and professionals, due to a company restructuring: HIX Dryer Model 3616 - Sophisticated recirculation air system with two independently adjustable motors (more information on request) - Exhaust system at both the entry and exit of the dryer - 6 heating zones - Belt width: 91 cm Nodpfeyzbbrox Akfjcr - Temperature sensor located directly in the drying tunnel - Low energy consumption thanks to excellent insulation and 3-wall design - 380-400V, 18.5 kW power connection - Dimensions: 489 x 112 x 148 cm - Mounted on lockable castors NOTE: There is a German company specializing in these premium machines, so professional maintenance and spare parts supply are assured. THE MACHINE IS CURRENTLY OPERATIONAL AND CAN BE TESTED BY APPOINTMENT! Assistance with loading is available. The inlet and outlet sections can be disassembled for transport if necessary.

Condition: good (used), functionality: fully functional, overall weight: 200 kg, Labotek dryer Type: DDM 60 ALB Labotek CON-EVATOR material conveyor Type: PGT 4/DDM Nsdpjvrubnofx Akfjcr Power: 0.5 kW

Condition: good (used), functionality: fully functional, Labotek dryer Type: DDM 120 ALB Ncodpsvtxmwjfx Akfer Power: 8.9 kW Labotek CON-EVATOR material conveyor Type: PGT 4/DDM Power: 0.5 kW

Condition: excellent (used), machine/vehicle number: 00 06 028/00 0026 S, functionality: fully functional, Dry air dryer Manufacturer: Motan Model: Luxor LA/8-200 Connected load: 6 kW Dry air volume: 200 m3/h With vacuum pump VACOM Model: VC 340-720 Power: 4.6 kW Nodpfeyvfkrsx Akfocr With central filter and Motan control Granulate silos: 1 x 150 L 4 x 60 L Material conveying units: Manufacturer: Motan Model: HLX-06-1-A000-0 5 units

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 4608 1999, power: 5.6 kW (7.61 HP), volume flow: 200 m³/h, Desiccant air dryer with material conveying units Manufacturer: Motan Model: ADC 200/10/20 Connected load: 5.6 kW Ncedeyvfibepfx Akfsr Dry air volume: 200 m³/h With vacuum pump VACOM Model: VC 340-720 Output: 4.6 kW With central filter and Motan control system 5 silos with material conveying units

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, The mobile dry air dryer of type KKT dries hygroscopic granulates directly next to your processing machine, and is also equipped with a TYPE 608 conveying unit. The saturated dry air flows through two alternating desiccant containers, where it is re-dried. This creates ultra-dry air with a dew point of approx. -35 °C. Dry air dryer: KKT 100S Dry air flow rate: 100 m³/h Desiccant containers: both NEW Container volume: 200 liters Mobile design Convenient touchscreen menu navigation Conveying unit: TYPE 608 Number of material types: 1 Blower: 1.1 kW Capacity: 8.5 liters Voltage: 230/50 Nsdoyxay Ispfx Akfecr

Condition: new, No. 3183 Ncedpfx Asu Tipkekfjr Vacuum dryer / drying chamber ISVE ES 3 / NEW New machine, delivery time 120 days Construction features: AISI-304 stainless steel, partially insulated External diameter: 1300 mm Length of cylindrical part: 5000 mm Dryer length: 5900 mm Dryer total length plus sliding guides: 11000 mm Max. operating vacuum: -730 mm Hg Timber pile length: 5000 mm Timber pile width: 800 mm Timber pile height: 790 mm Net wood volume: approx. 2,5 m3 Installed electrical power: 8,80 kW Average hourly power input: 4,4 kW/h Includes: - 9 electric heating plates (each 800 x 5000 x 10 mm LWH / 40 kg / 0,695 kW) - 1 oil vacuum pump (65 m3/h / 1,8 kW / 380 Vca) - 1 vacuum pump condenser (stainless steel tube with internal condensation system) - 2 internal condensers (turbofan of 0,37 kW each 380 VCa) - 2 one-way valves (clapet: one ¾” for vacuum circuit; one ½” for condenser discharge) - 1 solenoid air return valve (24 Vca: one 1” for the autoclave and one ½” for the condenser) - 1 manual air return (1” ball valve) - 1 electrical control panel (PLC type Siemens S7-1200, with touch panel) - 1 ISVE server connect with remote service and control - 2 wireless moisture probes (double probes for core and surface moisture reading) - 1 wireless temperature probe (for wood core reading) - 2 plates-holder stands - 1 instruction booklet (in English with CE certificate and wiring diagrams) Transport dimensions approx. 5900 x 1300 x 2000 mm LWH Weight approx. 2000 kg Technical details, year of construction and scope of delivery according to the manufacturer, without guarantee Subject to prior sale New machines are covered by the manufacturer's warranty Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Year of construction: 2018, condition: ready for operation (used), The dry air dryer from Digicolor is available for sale; the granulate dryer operates using the dry air drying principle. 40-liter capacity on a mobile frame Compact dryer footprint Simple setup and operation Ncedpjywh E Aofx Akfer Consistent dry air dew point Optimization of all drying parameters Energy-efficient drying technology No compressed air or cooling water required Dust-free dry air through adsorption rotor technology Antistress function, SmartMode, no overdrying of plastic granulate