Used Fliegl Tts 100 for sale (23,247)

Condition: used, machine/vehicle number: WFDFLT21001012243, empty load weight: 2,500 kg, maximum load weight: 8,000 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 07/2022, tire size: 235/75 r17,5, Year of construction: 2022, Further information Chassis central axle trailer low bed Welded fine-grained steel construction, front gear support foot, telescopic rear support, wheel chocks with bracket, sheet steel mudguards over both wheels Towing device central axle trailer Drawbar with tested 40 mm towing eye, height-adjustable drawbar via spindle, max. adjustment range 250 mm Gedpsqmc Rajfx Anxjub Axles + suspension Euro axles of our choice, with angular roller bearings and S-cam brakes, laser-measured axle/chassis to reduce tire wear and fuel consumption, parabolic suspension with maintenance-free steel/rubber bearings and mechanical axle load compensation (rocker compensation) Brake system 2-line compressed air brake system, spring-loaded parking brake, 2 interchangeable coupling heads at the front, with connecting lines to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side, 2 white position lights at the front, 2 white/red lane departure warning lights at the rear, 1 x 15-pin plug at the front, with connecting cable, TTS bridge low-lying steel trough, bridge floor made of steel/checker plate covering, steel walls solidly welded to floor, bridge length 5500 mm, trough at front and sides with load-lock profile for tensioning strap attachment (8 pieces at front, 16 pieces on each side) Note: Slight floor undulation possible due to welding distortion! Pair of lashing eyes, 1 x at the front in the corners of the steel tray and 1 x at the rear in the floor, 5 tons each. Pair of additional lashing eyes in the floor, 5 tons each Drive-on ramps Steel ramps 2 300 mm long, 510 mm wide, can be moved sideways, with handle on the ramps, covered with wood, with gas pressure jack for one-man operation Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Country of registration: Germany, with Dekra approval and expert opinion (in accordance with §13 EG - FGV), prepared for single-line license plate holder, contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear

Condition: new, machine/vehicle number: dd98a7658922be8f2e25bcadb, empty load weight: 2 kg, maximum load weight: 8 kg, overall weight: 10 kg, axle configuration: 2 axles, tire size: 235/75 r 17,5, Further information Chassis central axle trailer low bed Fine-grained steel welded construction Guedpfx Anoi Ri Ebjxjb Telescopic front support leg Telescopic rear support 2 wheel chocks with holder Mudguards made of sheet steel over both wheels Towing device central axle trailer Tow bar with tested 40 mm towing eye Height-adjustable drawbar via spindle, max. adjustment range 250 mm Axles + suspension Euro axles of our choice, with angular roller bearings and S-cam brake Axle/chassis laser-measured Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17,5 manufacturer's choice Factory silver steel rims Brake system 2-line compressed air brake system Spring-applied parking brake 2 interchangeable clutch heads at the front, with connecting cables to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, TTS bridge Low-lying steel trough, bridge floor made of steel/checker plate covering, steel walls solidly welded to floor Bridge length 4500 mmTub at the front and sides with Load-Lock profile for attaching tensioning straps (8 straps at the front, 12 straps on each side) Note: Slight floor undulation possible due to welding distortion! 2 pairs of lashing eyes, 1 x at the front in the corners of the steel tray and 1 x at the rear in the floor, 5 tons each. 2 additional pairs of lashing eyes in the floor, 5 tons each Drive-on ramps Steel ramps 2 300 mm long, 510 mm wide, can be moved sideways with grab handle on the ramps covered with wood With gas pressure jack for one-man operation Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Country of registration: Germany with Dekra approval and expert opinion (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paint finish Frame RAL 3002 carmine red Hot-dip galvanized drive-on ramps Attention: Archive pictures!

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 2,860 kg, maximum load weight: 7,040 kg, overall weight: 9,900 kg, axle configuration: 2 axles, tire size: 235 / 75 r 17,5, Further information Chassis central axle tipping trailer Welded steel construction, continuous tipping shaft at the rear with 80 mm ball tipping bearing Gear support foot at the front Folding rear support 2 wheel chocks with holder Steel underride guard Rear spray flaps across the entire width (not in conjunction with forklift bracket) Quarter-shell mudguards Lockable storage space for access ramps underneath the loading area 1 pair of ramps 3,000 mm long, 360 mm wide, load capacity per pair 4,000 kg (suspension bar for ramps at the rear) Towing device for central axle trailer Towing bar with tested 40 mm towing eye Height-adjustable drawbar via spindle, max. adjustment range 300 mm Axles + suspension GFA or BPW axles of the manufacturer's choice, with angular roller bearings and S-cam brake Axle/chassis laser-measured Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17,5 manufacturer's choice Factory silver steel rims Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Hand spindle parking brake Integral air reservoir ABS and ALB, with ABS plug at the front, with connecting cable, Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! 2 swap-proof coupling heads at the front, with connecting cables to the motor vehicle, Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin non-interchangeable plugs at the front, with connecting cable, Hydraulics Three-way tipping mechanism, hydraulic multi-piston press with lift limiter and safety cable, Low-pressure cylinder up to max. 170 bar, without throttle. If necessary, this must be retrofitted to the truck. Hydraulic connection with SVK plug NW 10/3, incl. connection hose Hydraulic actuation via truck power take-off Tilting bridges Sturdy tipper body with 4 mm sheet steel floor, steel side wall structure, continuous side walls, hinged and non-oscillating without central locking at the bottom. Rear corner stanchions pluggable. Rear wall can be folded down and pivoted, with central locking at the bottom. Platform length approx. 4,500 mm, side walls with 5 hinges at the bottom. Platform width 2420 mm 5 pairs of lashing eyes in the floor, 5 tons each Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Country of registration: Germany with Dekra approval and expert opinion (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paintwork Hot-dip galvanized frame incl. passivation 15-year warranty against rusting through Gujdpfx Ansi Ri Eisxsb Dropside/bridge RAL 9010 pure white Note! Bridge inside only primed if painted bridge version! Attention! These are archive pictures. Also available IMMEDIATELY with 5m bridge!

Condition: used, maximum load weight: 2,300 kg, overall weight: 3,000 kg, axle configuration: 2 axles, first registration: 06/2015, Ref. No.: B - 06 On behalf of customer Gjdpfexvf U Nox Anxeub Fliegl * TTS 30-30 * Low-bed trailer * Ramps * 2-axle * Permissible total weight 3000kg * Very good condition, little used Trade-in possible Financing starting at 3.99% Errors and prior sale excepted! The information in this advertisement is non-binding descriptions and does not constitute guaranteed characteristics. The seller assumes no liability for typographical or data transmission errors. Stated features should be checked separately. All details in the ads are non-binding! Nationwide delivery within Germany available upon request. Opening hours: Monday to Thursday from 9:00 am to 5:00 pm Friday from 9:00 am to 2:00 pm and by appointment!

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, type of input current: AC, input voltage: 400 V, working width: 1,100 mm, overall weight: 1,300 kg, workpiece width (max.): 600 mm, compressed air connection: 6 bar, sheet thickness (max.): 40 mm, number of previous owners: 1, height adjustment type: electric, table length: 3,000 mm, table height: 850 mm, table width: 600 mm, warranty duration: 3 months, Operating mode: dry Application description: Deburring of steel and stainless steel components Year of manufacture: 2007 Standards: CE, EU Machinery Directive 98/37/EC, VDE Units of measurement: mm, bar Operating manual: 1x manual included Paintwork: RAL 9002 white (textured), outfeed table RAL 5010 gentian blue Planetary head station with 3 units: Planetary head design with 6 tools per unit, each driven by a 1.3 kW motor; speed controlled by frequency converter, 100–300 rpm; disc station with electric height adjustment. Technical data: Working width: 1100 mm Table height adjustment: 0.55 kW motor Planetary head adjustment drive: 0.18 kW Feed drive: 1.3 kW (Lenze Motec) Conveyor belt dimensions: 1100 x 3000 mm (high wear-resistant design) Workpiece thickness: 0.8 – 40 mm Guodpfx Anjw U A Dmjxjb Constant working height: 850 mm Compressed air connection: 6–7 bar Operating voltage: 3x400 Volt/N/PE/50 Hz Control voltage: 24 Volt DC Infinitely variable feed rate: 0.5–5 m/min, frequency controlled; automatic workpiece thickness adjustment with start switch (Joucomatic); 400 mm outfeed table with integrated brush for conveyor drive (0.25 kW), DC brake Height adjustment gearbox, vacuum blower, aggregate locking, belts renewed – machine is fully operational and in very good technical condition. Adjusted according to manufacturer’s specifications/standards. Sale includes a 3-month mechanical functional warranty from date of delivery.

Condition: new, Year of construction: 2025, A laser marking machine is an invaluable part of a production. Wattsan FL TT can mark or engrave QR codes, serial numbers, dates, and any picture you want onto items. This laser marker works with metals and their alloys. Plastic, fabric, leather, glass, and other materials are also within reach of a laser. The marker’s tripod can be removed and mounted on the ceiling, allowing you to operate work items of any size! Wattsan FL TT comes with the EzCad system, which allows you to edit text in real time. It also supports vector, bitmap, BMP, PLT, CDR, DXT, and AI formats, among others. You can give our managers a call for additional details! Wattsan FL TT characteristics: Working area: 300x300, 110x110, 200x200 mm Laser power: 20-100 W Machine size: 740x400x740 mm Packing size: 820x490x850 mm Weight: 54 kg Guedpfx Aeh Uc Dbonxeb Laser sourse: RAYCUS, JPT (MOPA), IPG, MAX Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 20 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: excellent (used), Catalogue number: 7545 TECHNICAL DATA Track width: 250mm Shaft width: 220mm Max blade diameter: 300mm Blade bore diameter: 60mm Cutting height: 100mm Table width: 650mm Table length: 1460mm – Top: 2 rows of pawls Godpfx Aey Rrhbonxsub Smooth feed roller Blade shaft Smooth feed roller – Bottom: Guide rail Pawls Track 2 feed speed settings + stepless adjustment Central lubrication Feed motor: 1.2kW Main motor: 21kW Extraction outlet diameter: 180mm Overall dimensions (L/W/H): 1700x1450x1500mm Weight: approx. 1800kg – Made in Italy – DTR technical documentation – Robust machine – Used multi-blade saw, in very good condition Net price: 25,900 PLN Net price: 6,160 EUR depending on exchange rate 4.2 EUR (Prices may vary with significant fluctuations)

Condition: excellent (used), I am offering a professional industrial extraction unit / industrial vacuum cleaner from the renowned German brand AL-KO, model POWER UNIT APU 100. Gusdpfx Anoyxtf Rjxjb This unit is designed for extracting dust and contaminants in an industrial environment – ideal for workshops, carpentries, and manufacturing plants. The equipment is in very good technical condition and ready for immediate use. ⚙️ Technical Specifications - Manufacturer: AL-KO (Germany) - Model: POWER UNIT APU 100 - Year of manufacture: 2021 - Power supply: 400V / 50Hz (3-phase) - Motor power: 1.5 kW - Airflow: approx. 865 m³/h - Negative pressure: 2124 Pa - Connection diameter: 100 mm - Speed: 2896 rpm - Protection class: IP54 - Weight: approx. 116 kg ✅ Technical Condition - Complete device - Fully functional, ready for operation - Very good visual condition - No mechanical damage - Used – normal signs of use 📦 Included in the set - AL-KO POWER UNIT APU 100 extraction unit - Complete set as shown in the photos - Documentation (user manual) 🏭 Typical Applications - Carpentry workshops and wood processing plants - Production and workshop environments - Dust and chip extraction - Dust extraction systems

Condition: excellent (used), For sale: professional tool holder from the renowned brand WNT Germany – model B40 ER16M A=100. The holder is equipped with a Centro-P Germany HPC16MS-DI precision collet, ensuring maximum accuracy and clamping stability. The set also includes a VHM drill, making it ready for immediate use on a CNC machine. Condition: very good, the holder is fully functional, no play, with normal signs of use. Premium-class equipment – ideal for professional machining centers where precision and reliability are crucial. Guedpfxow Rr A Ds Anxsb

Condition: excellent (used), For sale: Professional automatic Vickers hardness tester Mitutoyo HV-100, made in Japan, in excellent technical and visual condition. The device is equipped with the AUTOVICK automatic measurement system and the Mitutoyo Vision Unit, enabling fast, repeatable and fully automatic hardness measurements without operator subjectivity. Intended for measurement laboratories, quality control departments, manufacturing plants, automotive, aerospace, and toolmaking sectors. —— Key information • Measurement method: Vickers (HV) Gjdoyc H I Sjpfx Anxeub • Model: HV-100 (series HV-100B / HV-100C / 100D) • Load range: up to 100 kgf • Automatic AUTOVICK system • Integrated Mitutoyo Vision Unit • Automatic impression recognition and HV calculation • Made in Japan • Power supply: 230 V • Stable, heavy-duty laboratory construction —— Technical condition • Device operational and complete • Very good visual condition • Regularly used in an industrial environment • Last technical inspection: 2020 • Ready for immediate operation after connection —— Included in the set • Mitutoyo HV-100 hardness tester • Vision Unit (measuring camera) • AUTOVICK automatic system • Set of weights • Original accessories and holders • Transport cases with equipment • Original Mitutoyo documentation and manuals • Weight: 65 kg

Condition: used, Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K with MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG and Load Cell TC-LC100KN.G02 (100 kN) The testXpert III 1.6 software serves as control and evaluation software for ZwickRoell materials testing machines. It enables standardized test procedures, logs measurement data, and supports traceability, among other features. Windows 11 Compatibility: ZwickRoell’s testing software (especially testXpert III) supports current Windows platforms, allowing use with Windows 11. Product Description: For sale is a high-quality materials testing system, consisting of: - Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K - MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG - Load Cell TC-LC100KN.G02 (100 kN) The system comes from laboratory usage and was employed for mechanical materials testing at ambient and high temperatures. All devices are used, well-maintained, and fully functional. Technical Highlights – Zwick/Roell Testing Machine Type: BTC-FR100SW.A4K Maximum test force: 100 kN AC drive 4 kW, widened stand design (W) Supply: 400 V / 50–60 Hz / 3Ph+N+PE, power consumption 9 A Working area: Height 1,765 mm, Width 1,030 mm Crosshead speed: 0.0005 – 1000 mm/min Gujdpfxsxt Hn Se Anxsb Positioning accuracy: < 2 µm Noise level: ≤ 70 dB(A) Test force range: 0.4–100% (Class 1) / 2–100% (Class 0.5) according to ISO 7500/1 Power requirement: 5.0 kVA Load frame height: approx. 2.32 m Machine weight: approx. 1,820 kg Load Cell: TC-LC100KN.G02 (IP67, GTM, 100 kN, 20 kg) Technical Highlights – MAYTEC High-Temperature Furnace Maximum temperature: 1200 °C 2 separately controllable heating zones Power: 0.66 kW / 22 A per zone Supply: 30 V / 50 Hz per zone Ideal for high-temperature testing in combination with the Zwick testing machine Load Cell TC-LC100KN.G02 Nominal force: 100 kN Protection rating: IP67 Precise force measurement to ISO 7500/1 Weight: 20 kg, GTM design Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see pictures) Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG Load Cell TC-LC100KN.G02 (100 kN) Connection cables and mounting accessories (if available) (Specifications and technical data may be subject to change and errors.) Further questions can be answered by phone.

Condition: used, empty load weight: 7,375 kg, maximum load weight: 27,625 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 02/2012, loading space length: 13,650 mm, suspension: air, tire size: 385/65R22,5 160J, color: other, gearing type: other, front tire size: 385/65R22,5 160J, rear tire size: 385/65R22,5 160J, driver cabin: other, emission class: none, Equipment: ABS, Stake pockets, , -- Misprints, errors and omissions excepted, sample pictures --, More details under: !, More Details: ! Gjdpfx Ansy Nivtsxoub

Condition: used, empty load weight: 5,300 kg, maximum load weight: 12,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2010, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,900 mm, loading space volume: 52 m³, suspension: air, tire size: 235/75R17,5 ---/141J, color: other, gearing type: other, front tire size: 235/75R17,5 ---/141J, rear tire size: 235/75R17,5 ---/141J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Lashing eyes, , --  Misprints, errors and changes reserved, Sample images --, More details at: !, More details: ! Guedpfxoy Niuij Anxjb

Condition: used, empty load weight: 4,300 kg, maximum load weight: 13,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 02/2019, loading space length: 7,200 mm, suspension: air, tire size: 445/45 R19,5 160J, color: other, gearing type: other, front tire size: 445/45 R19,5 160J, rear tire size: 445/45 R19,5 160J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Guodpfxjy Nitre Anxjb

Condition: good (used), Karl Tranklein EK-100 Corner Cutter Made in Germany. Very good condition. This is a professional, production-grade corner rounding machine. Sturdy cast iron construction and strong pressure ensure precise operation. Replaceable blades. Gedpfx Ansy Ehmijxjub Adjustable margins. One set of blades included. Stack height: 100mm Weight: 130kg Cycles per minute: 50 cycles/min Power supply: 400V Waste is collected in containers. This is the model currently in production.

Condition: used, empty load weight: 6,520 kg, maximum load weight: 23,480 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 05/2019, loading space length: 8,610 mm, suspension: air, tire size: 235/75R17,5 ---/140J, color: other, gearing type: other, front tire size: 235/75R17,5 ---/140J, rear tire size: 235/75R17,5 ---/140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading area length drop deck approx. 6.50 m, loading area length total approx. 8.60 m, loading height approx. 900 mm, , Vehicle is offered on behalf of a bank, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Gedpsy Izthefx Anxjub

Condition: good (used), axle configuration: 3 axles, first registration: 05/2023, loading space length: 13,650 mm, loading space width: 2,490 mm, loading space height: 3,010 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 435/50R19,5, color: other, Year of construction: 2023, Equipment: ABS, = Additional Options and Equipment = - EBS = Notes = Number of axles: 3, Unladen weight: 6,080 kg, Gross weight: 39,000 kg, Chassis type: Complete chassis, Kingpin size: 2 inch, Suspension type: Air suspension, ABS, EBS, Year of body construction: 2023, Side wall material: Tarpaulin, Customs cord, Sliding roof, Axle type: SAF = Further Information = General Information Cab: Day cab Registration number: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual Axle Configuration Tire size: 435/50R19.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire tread left: 5 mm; Tire tread right: 5 mm Axle 2: Tire tread left: 10 mm; Tire tread right: 10 mm Axle 3: Tire tread left: 4 mm; Tire tread right: 4 mm Weights Unladen weight: 6,080 kg Payload: 32,920 kg Gross vehicle weight: 39,000 kg Functional Load platform height: 95 cm Sliding roof: Yes Environment Emission class: Euro 0 Condition Technical condition: Good Optical condition: Good Damage: None = Company Information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European brands, model years, and price ranges. Guedpey N Rnkofx Anxob Why buy from Kleyn Trucks? It's simple! • Large, fast-changing stock • Recognizable quality • Good prices • Proper merchant business • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration plates are arranged quickly • Expert technical services • The safety of “recognizable quality” • And more… Please visit our website for special offers and the complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry via our website. Ask directly about our European warranty package.

Condition: used, empty load weight: 5,100 kg, axle configuration: 3 axles, first registration: 06/2018, Year of construction: 2018, Tare weight: 5100kg, Please find an overview of all vehicles available on our website . Finance required? We offer individual financing solutions, full service contracts and telematic-services. We would be glad to advise you personally. Gusdpfx Ansy Rcdtjxsb

Condition: used, empty load weight: 5,100 kg, axle configuration: 3 axles, first registration: 06/2018, Year of construction: 2018, Tare weight: 5100kg, Please find an overview of all vehicles available on our website . Finance required? We offer individual financing solutions, full service contracts and telematic-services. We would be glad to advise you personally. Godpfjy Rcdmex Anxjub

Condition: like new (used), Generally overhauled Price: 5.500EUR Spiral dough mixer Capacity: 100 kg of flour Gujdpsx N Ed Tefx Anxjb 160/180 kg of dough Diosna Container volume: 260 liters Electrical power: 380V / 50Hz / 3N/PE Two timers Two speeds Rewind option Half cover with safety switch Wheels with brakes

Condition: good (used), axle configuration: 3 axles, first registration: 05/2023, loading space length: 13,600 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,100 mm, suspension: air, tire size: 435/50R19,5, color: other, Year of construction: 2023, Equipment: ABS, = Additional Options and Equipment = - EBS - Lifting roof = Notes = Number of axles: 3, unladen weight: 6,080 kg, gross weight: 39,000 kg, chassis type: complete chassis, chassis material: steel, kingpin size: 2 inch, suspension type: air suspension, ABS, EBS, body year: 2023, customs rope, lifting roof, sliding roof, axle type: SAF = Further Information = General Information Cab type: Day cab Registration number: KLEYN1 Driveline Fuel type: Diesel Transmission Gearbox: Manual Axle Configuration Tire size: 435/50R19.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lift axle; left tire tread: 3 mm; right tire tread: 2 mm Axle 2: left tire tread: 11 mm; right tire tread: 10 mm Axle 3: left tire tread: 11 mm; right tire tread: 10 mm Weights Unladen weight: 6,080 kg Payload: 32,920 kg Gross vehicle weight: 39,000 kg Functionality Sliding roof: Yes Environment Emission class: Euro 0 Condition Technical condition: good Visual condition: good Damage: none = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European brands, model years, and price classes. Why buy at Kleyn Trucks? It’s simple! • Large and fast-changing stock Gujdpfx Anjy Iv Imjxjb • Recognizable quality • Good pricing • Reliable business practices • We speak many languages • We understand our customers • Support for import and transport • (Export) registration plates arranged quickly • Skilled technical services • The security of recognizable quality • And more… Visit our website for special offers and our complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry via our website. Ask directly about our European warranty package.

Condition: used, empty load weight: 3,690 kg, maximum load weight: 9,810 kg, overall weight: 13,500 kg, axle configuration: 2 axles, first registration: 09/2019, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, loading space volume: 48 m³, suspension: air, tire size: 285/70R19,5 148J, color: other, gearing type: other, front tire size: 285/70R19,5 148J, rear tire size: 285/70R19,5 148J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Lashing rings, , --  Misprints, errors and changes reserved, Sample pictures --, More details at: !, More details: ! Guodpfx Aey Hhzcsnxjb

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT22702018968, empty load weight: 4,000 kg, maximum load weight: 23,000 kg, overall weight: 27,000 kg, axle configuration: 2 axles, first registration: 02/2016, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R19,5", color: red, Year of construction: 2016, The images shown are archive photos! The vehicle may currently be in use! 2-axle flatbed semi-trailer Type SZS 270 Mega RH 95 Weights and Dimensions: Perm. / technical gross weight: 27,000 kg Perm. / technical payload approx.: 23,000 kg Perm. / technical axle load: 16,000 kg Perm. / technical fifth wheel load: 11,000 kg Unladen weight approx.: 4,000 kg +/- manufacturing tolerance Overall length approx.: 13,850 mm Gjdpfoy Rxmwox Anxjub Maximum overall width: 2,550 mm Overall height approx.: 2,220 mm Platform length approx.: 13,650 mm Platform width approx.: 2,480 mm Fifth wheel height approx.: 950 mm King pin installation measurement approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Vehicle consists of: Chassis: Spedition semi-trailer frame Fine-grain steel welded construction, fifth wheel plate with replaceable 2" king pin Outer frame with "Load-Lock profile" for lashing strap attachment, note: to attach straps when side walls are fitted, the side walls must be opened! 14 pairs of lashing rings, each rated to 2.5 t 24-t, 2-speed landing gear, operated from one side, with straight base, without equalizer Without support legs Wheel chocks with holder Side underrun protection, aluminium Rear underrun protection, steel Quarter-shell mudguards Axles & Suspension: SAF disc brake axles Air suspension Braking system: 2-line compressed air braking system Spring-loaded parking brake 2 fail-safe coupling heads at front, without connecting line EBS, electronic braking system with EBS socket front, without connection cable Attention: The trailer may only be towed by tractors capable of ensuring the ABS functions correctly! With raise & lower valve Vehicle stability system Wheels and Tyres: 385/55 R19.5” – make according to manufacturer’s choice Steel rims, factory silver Electrics: 24 Volt, multi-chamber tail lights, amber LED side marker lamps 2 white position lights at the front with protective bar 2 white/red lane marker lights at the rear 2 x 7-pin fail-safe sockets at front, without connection cable Floor: Anti-slip phenolic plywood floor approx. 30 mm thick, cross joints with Omega insert, on longitudinal beams for high point load capacity, suitable for forklift axle loads up to max. 7,100 kg Note: Floor warping due to weather influences possible! Front bulkhead/corner posts: 25 mm aluminium hollow profile, approx. 1,350 mm high, corner posts made of steel, high volume design, with “holes” for forklift drivers Approval / Markings: Germany With Dekra inspection and certificate 24/7 service hotline Prepared for one-line license plate holder Warning sign according to ECE-70 Conspicuity markings with reflective tape according to ECE R 048; side in white, rear in red Painting: Frame: RAL 3002 carmine red Landing gear: Black coated The images shown are archive photos! The vehicle may currently be in use!

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT22702019232, empty load weight: 4,000 kg, maximum load weight: 23,000 kg, overall weight: 24,000 kg, axle configuration: 2 axles, first registration: 06/2016, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R19,5", color: red, Year of construction: 2016, The images provided are archive photos! The vehicle may currently be in use! 2-Axle Platform Semi-Trailer Type SZS 270 Mega RH 95 Weights and Dimensions: Aggregate load capacity, permissible/technical: 16,000 kg Platform length approx.: 13,650 mm Platform width approx.: 2,480 mm King pin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Chassis/Frame Fine-grained steel welded construction, fifth wheel plate with interchangeable 2" king pin, with “Load-Lock profile” for lashing strap attachment, 14 pairs of lashing rings (2.5 t each), 24t, two-speed landing gear, one-sided operation, wheel chocks with holder, aluminium side underrun protection, hot-dip galvanized steel rear underrun guard, quarter-circle mudguards in front of and behind the axle assembly Axles & Suspension SAF small disc axles with disc brakes, air suspension Braking System 2-line compressed air braking system, spring-loaded parking brake, two fail-safe coupling heads at front, EBS, raising & lowering valve, Electronic Vehicle Stability Control System Note: This trailer may only be towed by tractors that guarantee effective ABS operation! Wheels and Tyres 385/55 R19.5", steel rims, factory silver Electrics 24 Volt, multi-chamber tail lights, yellow side LED lighting, two white front position lights, two white/red lane marker lights at rear, two 7-pin fail-safe sockets at front, without connecting cable Guedpfxey Rxl Hj Anxob Floor Birch plywood panels approx. 30 mm thick, with Omega inserts at cross joints, mounted on longitudinal supports for high point load capacity; suitable for forklift axle loads up to max. 7,100 kg Note: Floor swell due to weather conditions is possible! Front Wall/Corner Posts 25 mm aluminium hollow section, approx. 1,350 mm high, corner posts in steel, volume version, with “holes” for forklift drivers Registration / Signage With Dekra inspection and appraisal, 24/7 service hotline, prepared for single-line license plate holder, warning plate according to ECE-70, contour marking with reflective tape according to ECE R 048, white at sides, red at rear Paintwork Frame RAL 3002 carmine red, landing legs black coated Note: The images provided are archive photos! The vehicle may currently be in use!

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902037035, empty load weight: 4,795 kg, overall weight: 35,000 kg, axle configuration: > 3 axles, first registration: 05/2025, next inspection (TÜV): 09/2026, loading space length: 7,200 mm, loading space width: 2,470 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,040 mm, suspension: air, color: grey, Year of construction: 2025, These images are archive photos! Fine-grain steel welded construction, in basic lightweight design, saddle plate with interchangeable 2" kingpin, Curved front closure (patented) 24 t, 2-speed landing gear, single-sided operation, with semi-circular base and straight connection plate, with lateral displacement balance Wheel chocks with holder Foldable underrun protection Half-shell mudguards Integrated "mudguard holder" with stone-repellent surface With anti-spray mudflaps only on rear axle Tarp rod with holder Tow hook at the rear (not included for Revolution) Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser alignment to reduce tire wear and fuel consumption Axles in off-road specification Air suspension 1st axle, automatic lift axle, including forced lowering and traction aid, activated by "braking 3x" (traction aid functional up to a 30% axle overload and up to a max speed of 25 km/h) "Hot-dip galvanized lift axle mechanism" Gsdpfx Aoy Rrplonxoub Brake system 2-line compressed air brake system Color-coded line routing for easy maintenance Spring-loaded parking brake 2 front, foolproof coupling heads, without connecting line 24 Volt EBS, Electronic Braking System with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that ensure ABS functionality! With lift & lower valve Vehicle stability system Automatic tipping lowering with shut-off valve "TPMS" tire pressure monitoring system, display in the towing vehicle via EBS, without truck installation (the requirement must be met by the truck. Only for standard tires) Wheels and tires 385/65 R22.5" Steel rims Electrics 24 Volt, multi-chamber LED taillights, side yellow LED lighting, LED license plate lighting (Note! Certain towing vehicles may display error messages despite full function) Side yellow LED lighting linked to turn signal, "flashing side marker lights" 2 white LED position lights at the front 2 white/red LED lane marker lights at the rear 2 x 7-pin and 1 x 15-pin foolproof sockets at the front, without connecting cable Additional integrated LED work light recessed at rear, switched via reverse light Hydraulic system Low-pressure cylinder max. 170 bar, actuated hydraulically via truck PTO Bodies Aluminum box body made from high-quality, wear-resistant material Sloped front wall 5 mm thick, with external cylinder mount Side walls made from 30 mm hollow chamber profiles, neatly welded, with bulk material repellent upper rail profile. Interior climbing aid on front wall (not in conjunction with Cramaro) Shovel and broom holder on the outside of the front wall Greenline – conical and aerodynamic body shape "Membrane" rear wall Rear wall as swinging tailgate with "double-joint hinge", mounted externally with double hook latch Rear wall with rubber seal Continuous floor 6 mm thick Standing platform with climbing aid, connection plate for air/electrics and brake with large clearance for optimal handling Roll tarp to be stored on FR-right side, with central locking on FR-left Operating instructions For the transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to prevent damage and rust caused by these materials.