Used Fliegl Vts 400 Rr for sale (21,028)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 14,300 kg, maximum load weight: 9,700 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space width: 2,520 mm, loading space height: 900 mm, total length: 12,000 mm, total width: 2,550 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Further Information Chassis Steel welded construction Turntable with robust ball bearing Hodpji Ri I Nofx Abhjnp Foldable rear support 2 wheel chocks + holder Aluminum side underrun protection Splash guards at the rear over the entire width Quarter panel fenders in front of the 1st axle Excavator arm recess starting above the rear axles to the rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep, 2 pairs of lashing points of 5 tons each in the excavator arm recess on the side of the longitudinal frame, approx. 300 mm from the front and approx. 200 mm in front of the rear slope 1 storage box recessed in the gooseneck in the floor with a lid, W=720 mm/ L=520 mm / D= 170 mm 1st pair of wheel recesses recessed in the gooseneck in the low-loader wheel well area, sloped for access, length at the bottom approx. 1600 mm, approx. 400 mm deep. Note! Frame in the main beam area is 400 mm higher than the wheel recess. 2nd pair of wheel recesses between the axles recessed in the low-loader in the wheel well area, sloped for access, length at the bottom approx. 600, approx. 300 mm deep. Note! Frame in the main beam area is 300 mm higher than the wheel recess. Wheel recess cover pull-out from the main frame, with wood inserts. Distance from the outer frame, beam to beam, approx. 1280 mm Extensions pull-out to 3,000 mm, foldable at the wheel recess extensions (extension not in the rear slope and not in the wheel recesses at the bottom) Storage compartment for wooden planks in the middle of the loading area or under the loading area, depending on technical feasibility Wooden planks 70 mm for extension to 3000 mm Lashing points, low-loader 1 pair of ring lashing points recessed at the front on the gooseneck, each 5 tons 8 pairs of lashing eyes at the top and on the side recessed in the outer frame, each 10 tons 2 x at the front on the gooseneck 6 x in the low-loader, the first lashing point 250 mm from the front and the last one max. 250 mm from the rear, the distance between the lashing points is no more than 1100 mm 5 pairs of ring lashing points recessed in the outer frame, each 5 tons (can be converted to stake pockets) Coupling system, trailer, turntable Drawbar with tested 50 mm drawbar eye with 8° inclined drawbar eye Axles + Suspension SAF drum brake axles Axle/chassis laser-aligned, reducing tire wear and fuel consumption Air suspension with lifting and lowering valve, can be operated separately at the front and rear Wheels and tires 235/75R17.5 according to manufacturer's choice Steel rims in twin arrangement, factory silver Braking system 2-line compressed air brake system Spring-loaded parking brake Trailer Info Center for displaying vehicle data such as axle load (no calibrated scale) and odometer Axle load detection via EBS-CAN bus signal, for display on the display in the cab, truck must be suitably prepared, no truck installation (no calibrated scale) Vehicle-driving stability system Duomatic connection at the front, with connecting cable to the towing vehicle EBS, Electronic Braking System with EBS plug at the front, with connecting cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrical system 24 Volt, multi-chamber lights in LED with resistor, yellow LED lighting on the side, license plat

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 9,900 kg, maximum load weight: 14,100 kg, overall weight: 24,000 kg, axle configuration: > 3 axles, tire size: 235 / 75 r 17,5, Custom-tailored transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Further information Chassis Steel welded construction Turntable with robust ball bearing, storage box recessed Turntable extension Foldable rear support 2 wheel chocks with holder Aluminum side impact protection Mud flaps at the rear across the entire width Extendable wideners to 3,000 mm (not in rear slope) (However, the track width of the construction machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks in the center of the loading area Wooden planks 70 mm for widening to 3000 mm Tie-down eyes, low-loader type 3 pairs of tie-down points, each rated at 10 tons, integrated in the front of the floor 6 pairs of tie-down anchor plates, top and side in the outer frame, each rated at 10 tons 1 x in the neck area the rest distributed in between with a maximum distance of 1200 mm 1 x rear slope 5 pairs of pocket slots recessed in the outer frame, inside 70 x 40 mm, (can be converted to 5-ton ring tie-down eyes, not included in the scope of supply) Towing device, turntable trailer Tow bar with tested 40 mm towing eye Note! With a 40 mm towing eye, the permissible total weight of the truck must not exceed 18000 kg; otherwise, a 50 mm towing eye is required. Axles + Suspension SAF drum brake axles Axle / chassis laser-aligned, reducing tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load equalization in the front and rear (rocker equalization) Wheels & Tires 235 / 75 R 17.5, according to manufacturer's choice Steel rims in twin arrangement, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle ABS and ALB, with ABS plug at the front, with connecting cable Attention: The trailer may only be pulled by towing vehicles which guarantee the effectiveness of the ABS! Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe plugs at the front, with connecting cable 1 LED rotating beacon with holder, switched via parking light (beacon can be removed) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Front area: steel floor followed by 70 mm softwood floor, steel / diamond plate in the wheel arch area Rear slope with 70 mm softwood floor Hnsdei Ri I Eepfx Abhjp Access Ramps Steel ramps, 2800 mm long, 750 mm wide, laterally movable covered with wood with gas spring support Operating Instructions With an axle load of 10,000 kg, an exemption permit is required, only indivisible loads are possible!!! The stated total weight is technically possible; depending on the cargo, the total weight may not be reached while complying with the permissible axle / support and saddle loads. Country of Registration / Signs Country of Registration: Germany 1 with Dekra inspection and certificate (according to §13 EG - FGV) 24/7 service hotline prepared for license plate holder, two-line Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paint finish Frame: RAL 3002 Carmine Red 10-year warranty against rust-through Tow bar: galv

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 8,500 kg, maximum load weight: 15,500 kg, overall weight: 24,000 kg, axle configuration: > 3 axles, loading space width: 2,520 mm, loading space height: 890 mm, total length: 11,940 mm, total width: 2,550 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements. Further Information Low-loader trailer chassis Steel welded construction Turntable with heavy-duty ball bearing Foldable rear support 2 support wedges with holder Aluminum side impact protection Splash guards at the rear over the entire width Quarter panel fenders in front of the 1st axle Extendable widening elements to 3,000 mm (not in rear slope) (However, the track width of the construction machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks in the center of the loading area Wooden planks 70 mm for widening to 3000 mm Tie-down points for low-loader 1 pair of tie-down points on the gooseneck, each 5 tons 9 pairs of tie-down eyes embedded at the top and sides in the outer frame, each 10 tons 2 x at the front on the gooseneck 7 x in the low bed 6 pairs of tie-down holes in the outer frame of the low bed, each with 5 tons. (for securing lashing straps) Coupling device for trailer turntable Drawbar with tested 50 mm drawbar eye Axles + Suspension SAF drum brake axles Axle/chassis laser-aligned to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical incl. Axle load equalization at the front and rear (lever equalization) Wheels and tires 235 / 75 R 17.5 according to the manufacturer's choice Steel rims in twin arrangement, factory silver Braking system 2-line compressed air braking system Spring brake parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 1 LED warning light with holder, switched via side lights (light can be removed) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm 2 x 7-pin fail-safe plugs at the front, with connecting cable Floor Gooseneck at the front with steel/diamond plate Hnedpei Ri Izsfx Abhsp thereafter with 70 mm softwood floor, in the wheel arch area steel/diamond plate Rear slope with 70 mm softwood floor Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally movable covered with wood Hydraulically operated via tractor's auxiliary drive with throttle, operation on the left side Hydraulic connection with quick-release coupling NW 10/3, incl. connecting hose Operating instructions At 10,000 kg axle load, an exemption permit is required, only indivisible loads are possible!!! The stated total weight is technically possible; depending on the cargo, the total weight may not be reached while observing the permissible axle/support and saddle loads. (Poor driving and handling behavior possible due to incorrect load distribution) Country of registration / Signs Country of registration: Germany with Dekra approval and certificate (according to §13 EG - FGV) 24/7 service hotline included prepared for license plate holder, two-line Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Painting Frame DB 7350 Novagrau 10-year warranty against rusting Drawbar galva

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, overall weight: 24,000 kg, axle configuration: > 3 axles, loading space height: 900 mm, total length: 11,940 mm, total width: 2,550 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Additional Information Low-bed semi-trailer chassis Steel welded construction Turntable with heavy-duty ball bearing ring Folding rear outriggers 2 support wedges with holder Aluminum side impact protection Rear splash guards covering the entire width Semi-fender for 1st and 2nd axles with anti-spray splash guards behind each axle, anti-spray splash guards in front of and behind the 3rd and 4th axles Excavator arm recess above the rear axles, extending to the rear, approximately 1800 mm long, approximately 650 mm wide and approximately 150 mm deep, 2 pairs of lashing points of 5 tons each in the excavator arm recess, laterally on the longitudinal frame, approximately 300 mm from the front and approximately 200 mm in front of the rear slope 1 plastic toolbox, with insert, w=620/h=360/d=440 mm, lockable with a padlock (lock not included) 1 storage box recessed in the gooseneck at the bottom with lid, W=720 mm/ L=520 mm / D= 170 mm Extendable widening elements to 3,000 mm (not in the rear slope) (However, the track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Wooden planks 70 mm for widening to 3000 mm Storage compartment for wooden planks under the loading platform Lashing eyes for low-bed trailer (40 lashing options) 1 pair of lashing eyes on the gooseneck, each 5 tons 9 pairs of lashing eyes embedded above and on the side in the outer frame, each 10 tons 2 x at the front on the gooseneck 7 x in the low bed 6 pairs of lashing eyes in the outer frame from the low bed, each 5 tons (for attaching tie-down straps) 3 pairs of folding lashing eyes additionally, each 10 tons 1 x inside next to the main frame at the beginning of the low bed 1 x on the gooseneck (protruding) 1 x behind the last axle, recessed in the floor Coupling device for the trailer turntable Drawbar with tested 50 mm drawbar eye, drawbar eye inclined by 8° / D-value min. 160 kN Axles + Suspension Drum brake axles Parabolic spring suspension with maintenance-free steel-rubber bearing and mechanical axle load equalization at the front and rear (rocker equalization) Wheels and Tires 235 / 75 R 17.5 according to the manufacturer's choice Steel rims in twin arrangement, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle, ABS and ALB, with ABS connector at the front, with connecting cable Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking lights (beacon removable) 2 pairs of warning signs double LED illuminated and extendable to 3,000 mm Floor Gooseneck at the front with steel / checkered plate covering Hnsdpfx Aboi Ri Daohsp followed by 70 mm softwood floor, wheel arch area with steel / checkered plate covering Rear slope with 70 mm softwood floor Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable covered with wood Hydraulically operated via towing vehicle auxiliary drive with throttle, operation on the left-hand side at the front Hydraulic connection with SVK plug NW 10/3, incl. connecting hose Country of Registration / Signs Country of Registration: Germany 24/7 Service Hotline prepared for two-line license plate holder Contour marking with reflective strips ac

Condition: used, empty load weight: 9,980 kg, maximum load weight: 30,020 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 02/2022, loading space length: 10,200 mm, loading space width: 2,520 mm, loading space height: 950 mm, suspension: air, tire size: 235/75R17.5, color: grey, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 4 axles, SAF axles, turntable, air suspension, ABS (anti-lock braking system), extendable to 3m, lashing points, 2-part loading ramps, hydraulic ramps, side aluminum fender, twin tires, wheel recesses. Superstructure: 4-axle low-bed trailer with wheel recesses, excavator arm recess, and hydraulic ramps, in like-new condition! Hodpfx Abozg Ev Ujhenp 4x 10t SAF axles, drum brakes, total weight technically 40,000 kg, loading length of the gooseneck approx. 2800 mm, loading length of the low-bed platform approx. 7400 mm, extendable to 3000 mm, 50 mm drawbar eye, 1st pair of wheel recesses approx. 1600 mm long, 2nd pair of wheel recesses approx. 600 mm, ramp length approx. 3850 mm, ramps are hot-dip galvanized, ramps can be hydraulically shifted sideways. Loading height of the front wheel recess approx. 560 mm! Loading height of the rear wheel recess approx. 650 mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT44001000966, empty load weight: 9,400 kg, maximum load weight: 30,600 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 10/2010, loading space length: 7,145 mm, loading space width: 2,750 mm, loading space height: 900 mm, total length: 12,120 mm, total width: 27,500 mm, total height: 900 mm, suspension: steel, tire size: 235/75 R17,5", color: red, The images shown are archive photos! Permissible / technical gross weight: 24,000 / 40,000 kg Permissible / technical payload approx.: 14,600 / 30,600 kg Permissible / technical axle load: 24,000 / 40,000 kg Unladen weight (basic version) approx.: 9,400 kg +/- manufacturing tolerance Overall length approx.: 12,120 mm Overall width max.: 2,750 mm Neck length approx.: 2,850 mm Low bed platform length in wheel track area incl. rear bevel approx.: 7,145 mm Rear bevel length approx.: 850 mm Frame width approx.: 2,750 mm Loaded bed height in low bed approx.: 900 mm Drawbar height approx.: 950 mm Drawbar length approx.: 1,700 mm Chassis: Low-bed trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holders Aluminum side underrun protection 1 plastic toolbox, Extendable width up to 3,250 mm (not at rear bevel) (track width of machine/vehicles to be transported must not exceed outer frame width of 2,750 mm) Storage compartment for wooden boards in the center of the loading area 70 mm wooden boards for extension to 3,000 mm 2 pairs of stake pockets in the low bed recessed into the longitudinal beams Lashing points low-bed: 2 pairs of lashing eyes on neck, 5 tons each 1 pair of lashing eyes in rear bevel 4 lashing eyes recessed in the middle of the floor 2 pairs of keyhole profiles in wheel track area for insertion of longitudinal guide rails and as additional lashing option 6 pairs of lashing pins recessed in outer low-bed frame, 10 tons each 5 pairs of stake pockets recessed in the outer frame of the low bed 4 additional pairs of 10 ton lashing eyes: - 1x on neck - 3x recessed in low bed floor Trailer towing device, turntable design Drawbar with certified 50 mm towing eye Axles & Suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber mounts and mechanical axle load equalization front and rear (rocker balancing) Wheels and Tires 235/75 R 17.5" Steel twin wheels, factory silver finish Brake System 2-line compressed air brake system Spring-loaded parking brake 2 foolproof couplings at front, with interconnecting lines to tractor ABS and ALB, with ABS socket at front and connection cable Note: The trailer may only be towed by vehicles ensuring proper ABS functionality! Floor Neck area with steel / checker plate covering Followed by 70 mm softwood floor; in wheel arch area steel / checker plate Rear bevel with 70 mm softwood floor Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable, with wooden covering Hydraulically operated via tractor auxiliary drive Operating Notes At 10,000 kg axle load, an exemption permit is required, only indivisible loads permitted! Note! Oversize length and width require a permanent special permit. When applying for an exemption for regulated heavy haulage, an axle load indicator is required for air-suspended vehicles! This applies to any deviation from § 34 StVZO (axle and permissible total weight overrun), which requires an exemption under § 70 StVZO. The specified gross weight is technically possible; depending on the load, the total weight permitted by axle, support, and kingpin loads may not be achieved. (Poor driving or tracking behavior may occur due to improper load distribution) Hsdpfx Aoyxq A Hebhjnp The images shown are archive photos!

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 8,500 kg, maximum load weight: 15,500 kg, overall weight: 24,000 kg, axle configuration: > 3 axles, loading space width: 2,520 mm, loading space height: 890 mm, total length: 11,940 mm, total width: 2,550 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Custom-Tailored Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. More Information Chassis Steel welded construction Turntable with heavy-duty ball bearing Foldable rear support 2 outrigger plates with holder Aluminum side impact protection Splash guards at the rear, covering the entire width Semi-elliptical fenders for 1st and 2nd axles with anti-spray splash guards behind each axle, anti-spray splash guards in front of and behind the 3rd and 4th axles Excavator arm recess starting above the rear axles and extending to the rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep, 2 pairs of lashing points, each 5 tons, in the excavator arm recess on the side of the longitudinal frame, approx. 300 mm from the front and approx. 200 mm in front of the rear slope. 1 plastic toolbox with insert, w=620/h=360/d=440 mm, lockable with a padlock (lock not included). 1 storage box recessed into the gooseneck with a cover, W=720 mm / L=520 mm / D=170 mm Extendable widening sections to 3,000 mm Wooden planks, 70 mm, for widening to 3,000 mm Storage compartment for wooden planks under the loading area Lashing points for low-bed trailers (40 lashing options) 1 pair of lashing points on the gooseneck, each 5 tons 9 pairs of lashing eyes recessed on the top and side of the outer frame, each 10 tons 2 x at the front on the gooseneck 7 x in the low bed 6 pairs of lashing points in the outer frame of the low bed, each 5 tons (tie-down strap attachment) 3 pairs of folding lashing points, each 10 tons 1 x inside next to the main frame at the beginning of the low bed 1 x on the gooseneck (overhanging) 1 x behind the last axle, recessed into the floor Coupling device, trailer turntable Tow hitch with tested 50 mm drawbar eye, drawbar eye inclined 8°, D-value min. 160 kN Axles + Suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load equalization at the front and rear (rocker arm equalization) Wheels and Tires 235 / 75 R 17.5, according to the manufacturer's choice Steel rims in twin arrangement, factory silver Braking System 2-line compressed air braking system Spring brake parking brake 2 fail-safe coupling heads at the front, with connecting lines to the tractor unit ABS and ALB, with ABS connector at the front, with connecting cable Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe connectors at the front, with connecting cable 1 LED rotating beacon with holder, switched via parking lights (beacon removable) 2 pairs of warning panels, double LED illuminated and extendable to 3,000 mm Floor Gooseneck at the front with steel/diamond plate covering followed by 70 mm soft wood flooring, steel/diamond plate covering in the wheel arch area Rear slope with 70 mm soft wood flooring Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable covered with wood with spring-assisted support Country of Registration/Signs Country of Registration: Germany 24/7 service hotline prepared for license plate holder, two lines Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Warning sign according to ECE - 70 Paintwork Frame hot-dip galvanized including passivation, 15-year Hodpoi Ri A Ssfx Abhonp

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,810 kg, maximum load weight: 34,190 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 12,660 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis for semi-trailer containers Fine-grained steel welded construction, semi-trailer plate with replaceable kingpins Container mounts: 1 x 40-foot with gooseneck tunnel Transport of filled tank containers is not permitted. Without rear height adjustment and without foldable center supports, transport of containers without a tunnel is not possible. Front container guide, plug-in type 24-ton, 2-speed support jack, single-sided operation, with straight lower section, without thrust compensation Wheel chocks with holders Aluminum side impact protection Galvanized steel underrun protection Half-shell fenders With anti-spray flaps per EC Rear bumper Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured to reduce tire wear and fuel consumption Offset wheelbase mm (combined transport) up to 44-ton gross train weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assist, operated by 3 brakes (start-up assist is functional up to a 30% axle load exceedance and up to a maximum speed of 25 km/h) Brake system 2-line air brake system; color-coded lines for easy servicing. Spring-loaded parking brake EBS, Electronic Braking System with front EBS socket, without connecting cable Warning: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal, for display in the cab; truck must be equipped accordingly; no truck installation required. Wheels and tires 385/55 R22.5, brand selected by the manufacturer Steel rims, factory silver Electrical System 24 volts, multi-chamber lights, LED taillights and brake lights, yellow LED side lighting 2 white front position lights 2 white/red rear lane-marking lights 1 x 15-pin socket at the front, without connecting cable LED work lights on both sides (activated via reverse light) Additional LED work light(s) at the rear, activated via reverse light Operating Instructions The specified gross weight is technically possible; however, depending on the load, the gross weight may not be achieved while complying with the permissible axle, support, and fifth-wheel loads Special permit required if the total train length exceeds 16,500 mm Caution: Transport of filled tank containers is prohibited! Country of registration/plates Germany With DEKRA approval and certificate (per §13 EC - FGV) Prepared for single-line license plate holder Hnsdpfozlkgcox Abhjp Warning sign per ECE - 70 Contour marking with reflective strips per ECE R 048, white on the sides and red at the rear Paint finish Frame DB 7350 Novagrau *10-year warranty against rust-through* or hot-dip galvanized *15-year warranty against rust-through* Support legs black coated Customized transport solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications.

Condition: good (used), Technical data for the extension plates: Manufacturer: Jung Heinrich Type: MPB Included in the scope of delivery: 02x extension plates, used Overall length: approx. 400 mm Overall width: approx. 129 mm Internal width: approx. 121 mm Suitable for frame profile width: approx. 120 mm Depth: approx. 49 mm Material thickness: approx. 4.00 mm Hole spacing in depth: approx. 100 mm Hole spacing in width x height: approx. 85 x 100 mm Borehole diameter: approx. 10 mm Material color: blue Weight / piece: approx. 2.59 kg Hnodsipt Ddjpfx Abhop Note: No screws or fasteners are included in the scope of delivery.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,500 kg, maximum load weight: 33,500 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 12,660 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements. Chassis, semi-trailer, container Fine-grained steel welded construction, kingpin plate with 2 replaceable kingpins and 2 kingpin positions Container receptacles: 1 x 20 ft in the center without steel/non-slip flooring in the rear area 2 x 20 ft or 1 x 40 ft with gooseneck tunnel without height adjustment at the rear and without folding center supports, transport of containers without a tunnel is not possible. 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without stroke compensation 2 chock blocks with holder Aluminum side underrun protection Galvanized steel rear underrun protection Semi-elliptical fenders with anti-splash flaps according to EC Rear impact protection Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Offset axle spacing mm (combined transport) up to 44 tons gross vehicle weight Air suspension Braking system 2-line compressed air braking system Color-coded line routing for easy maintenance. Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connection line EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be pulled by tractor units that guarantee the effectiveness of the ABS! Hnsdpfoi Riv Nex Abhsp with raise/lower valve Vehicle - Driving Stability System Axle load detection via EBS-CAN bus signal for display on the dashboard in the driver's cab; the truck must be appropriately prepared; no truck installation (no calibrated scale) Wheels and tires 385/55 R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 volts, multi-chamber lights, tail and brake lights in LED, yellow LED lighting on the sides (Note: with certain tractor units, false diagnoses may occur, even if the function is working) 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole non-interchangeable sockets at the front, without connection cable 2 additional LED work lights at the rear, switched via reversing light Operating instructions Note: Transport of filled tank containers is not permitted! Country of registration / signs Germany with DEKRA approval and certificate (according to §13 EC - FGV) prepared for single-row license plate holder Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame DB 7350 Novagrau - 10-year guarantee against rust-through or hot-dip galvanized - 15-year guarantee against rust-through Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,800 kg, maximum load weight: 28,200 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,000 mm, loading space width: 2,480 mm, total length: 13,200 mm, total width: 2,550 mm, total height: 2,645 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized to individual customer requirements. Chassis, Fifth Wheel, and Transport Fine-grained steel welded construction, fifth wheel plate with interchangeable 2" kingpin, mounting position for warning signs at the rear, outer frame with "Load-Lock profile" for lashing straps, 24-ton capacity, two-speed landing gear, single-sided operation, lashing eyes, yellow marked, 2 of which are located at the rear as towing eyes, container locking: 4 pairs of container locking mechanisms embedded in the floor for 2 x 20 ft or 1 x 40 ft containers, pocket recesses embedded in the outer frame, 80 x 80 mm internal dimensions, pocket recesses embedded in the center of the floor, 80 x 80 mm internal dimensions, plug-in crossbars B=80/ D=80/ L=1200 mm, hot-dip galvanized, lashing eyelets embedded in the outer frame, 5 tons each, 2 storage boxes b= approx. 1230 / h= approx. 450 mm, closed and mounted across the entire width in front of the axles, replacing side impact protection, front locking mechanism can be inserted as a pin, lashing/crossbar rails embedded transversely in the floor across the entire width to the outer frame, approx. 100 mm high, with 20 mm round steel rails, top and bottom, distance from top to bottom approx. 60 mm (of the round steel), with angle sheet at the bottom as a closure, open halfway downwards for lashing and inserting crossbars 80 x 80 mm, storage compartment for warning signs, open, as technically possible. Axles and Suspension SAF disc brake axles, "axles/chassis laser-measured" to reduce tire wear and fuel consumption, air suspension, 1st axle automatic lift axle, including forced lowering and start-up assistance, operation "3x brake", 2 driving heights, can be switched over via hand knob: 1 x for saddle height 1120 mm 1 x for saddle height 1200 mm Braking System 2-line compressed air braking system, color-coded lines for easy maintenance, spring-loaded parking brake, 2 non-interchangeable coupling heads at the front, EBS, electronic braking system with EBS socket at the front, with lifting and lowering valve, vehicle - driving stability system Wheels and Tires 385/65 R 22.5", steel rims, factory silver Hedpjzb Iu Dsfx Abhjnp Electrical System 24 Volt, 4 x 3-chamber lights, yellow LED lighting on the sides 2 white position lights at the front in LED 2 white/red marker lights at the rear in LED 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without connection cable Rotating beacon with holder, switched via parking light (light can be removed) 2 pairs of warning signs double LED illuminated, extendable to 4500 mm and removable with plug. With additional holder at the rear Additional 7-pin socket (according to ISO 1724) in the underride guard at the rear Floor Sieve-printed panels approx. 30 mm thick, transverse impact protection with omega inserts, on longitudinal cross members for high point load capacity for forklift axle load up to max. 7100 kg Front Wall / Front Corner Posts 25 mm aluminum hollow profile, 1650 mm high, corner posts steel in volume design Front wall additionally covered with 1250 mm high sieve-printed panel on the inside "Crash blocker", at the bottom inside at approx. 140 mm height with steel ram protection Storage compartment for plug-in crossbars 80 x 80 on the inside of the front wall Painting Frame: Hot-dip galvanized including passivation or pa

Condition: used, axle configuration: 2 axles, loading space length: 62,000 mm, loading space width: 24,900 mm, loading space height: 3,800 mm, Year of construction: 2020, Equipment: ABS, = Additional Options and Accessories = - Air suspension, rear - Air suspension, front = Notes = For inquiries regarding the vehicle, please contact Mr. Seidel (at the following telephone number). Fliegl TPS 119 flatbed trailer Air suspension, 40 mm drawbar coupling, Duomatic, GFA axles, Knorr ABS, spring brake, loading ramps, permissible total weight: 11,900 kg, unladen weight: 3,250 kg, payload: 8,650 kg, cargo area dimensions: L 6,200 mm W 2,490 mm H 380 mm, tire tread: 1st axle 10 mm, 2nd axle 10 mm Upon request, we will provide you with a leasing or financing offer. Mr. Seidel (tel. ) will be happy to assist you. Further information can be found on our website. ... Errors, changes and prior sale reserved!!! - = Further Information = Unladen weight: 3,250 kg Payload: 8,650 kg GVW: 11,900 kg Hnedpfx Aey Ada Tjbhjp Last inspection: 2026-07 Please contact Tobias Ebert for further information.

Condition: new, Year of construction: 2025, Working width: 380 mm Working height: 250 mm 1st unit, rotor group: Group of two oscillating rotor brushes, Ø 200 mm, one 1.5 kW motor per brush, variable speed drive 2nd unit, rotor group: Group of two oscillating rotor brushes, Ø 200 mm, one 1.5 kW motor per brush, variable speed drive Both units with oscillation: yes Height adjustment: handwheel Height indicator: mechanical counter Hnjdpfx Asv R U Ifebhjp Feed speed: 1 - 6 m/min Feed motor power: 0.37 kW Vacuum carpet: yes Machine length: 1400 mm Machine width: 900 mm Weight: 500 kg

Condition: used, Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower, fan Hnjdpfeuu U Txox Abhjp -Manufacturer: Haier, fan blower for air conditioning -Type: lKFD-35-1 -Voltage: 220 V / 35 W -Fan wheel: Ø 400 mm -Total dimensions: 400/190/H530 mm -Weight: 3.3 kg

Condition: good (used), Dust extraction blower, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower, fan -Fan: Blower radial fan, double version without drive Hsdpfx Abjx Exnwjhonp -Fan wheel: 2x Ø 400 x 380 mm -Axle length: approx. 1230 mm -Motor power: designed for 0.55 to 7.5 kW -Drive shaft: Ø 30 mm, V-belt pulley 2-groove Ø 235 mm see photos -Number: 2x blowers available Price: per piece -Dimensions: 1470/600/H690 mm -Weight: 65 kg/unit

Condition: used, mileage: 1,02,356 km, power: 115 kW (156.36 HP), first registration: 05/2022, fuel type: diesel, overall weight: 3,500 kg, tire size: 195/75R16C, fuel: diesel, color: white, gearing type: mechanical, emission class: euro6, loading space volume: 14 m³, Equipment: ABS, AdBlue, air conditioning, airbag, central locking, cruise control, onboard computer, power assisted steering, power mirror, tail-lift, Special Features - Cruise control - Air conditioning - Electric windows - Electric mirrors, heated - On-board computer - Radio - Airbags - Power steering - Central locking with remote control - ABS - ASR - Rear view camera - 6 new tires - Multifunction steering wheel - Spare wheel - Carrier DataCOLD 300 temperature data logger Body Refrigerated body by LAMBERET: - Internal dimensions: 3.5 x 2.05 x 1.95 (m) (L x W x H) - Volume: 13.99 m³ - Side door - Interior lighting - Non-slip floor Carrier Pulsor 400 unit: - Evaporator - Standby and night operation 230V - When driving, the unit operates with its own diesel engine Tail lift: Dhollandia DHLM.08 - Load capacity 500kg - Remote control Hodpfx Abjy S Scbehonp For sale is an Iveco Daily 35C16, equipped with a high-quality refrigerated box body from the renowned French manufacturer Lamberet. The body impresses with its robust construction, excellent insulation quality and well-thought-out functionality – ideal for professional refrigerated transport. In addition, the vehicle is equipped with a Carrier DataCOLD 300 temperature data logger, which enables reliable monitoring and documentation of the cooling temperature during transport. The vehicle is ready for registration. German vehicle documents and TÜV (technical inspection) are included in the price. Available in our Langenfeld warehouse! ACR-Juretzki Commercial Vehicle Trading GmbH – Your reliable partner for used commercial vehicles. All vehicles offered by us are owned by ACR-Juretzki Commercial Vehicle Trading GmbH. The presentation is done exclusively with original photos that were taken directly in our company – this guarantees full transparency regarding the actual condition of the vehicle. Before sale, our vehicles undergo a comprehensive refurbishment in our own workshop – including mechanics, bodywork and painting. They are thus optimally prepared for the next technical inspection. We also guarantee the authenticity of the stated mileage. Trust is good – control is better: If desired, the vehicle can be inspected by independent inspection organizations such as TÜV, DEKRA or KÜS – also as part of a remote inspection. Our service offer for you: Delivery of your vehicle to the location of your choice Complete handling of export formalities, including export license plates Individual financing and leasing offers Trade-in of your current vehicle Installation of special equipment according to your wishes Are you looking for something specific? If you cannot find a suitable vehicle for your company in our current stock, please contact us – we will be happy to help you. We are available at any time for technical details, more photos or a personal consultation. All prices quoted are net prices. The content of our website has been created with the utmost care and is regularly updated. Nevertheless, it serves exclusively for general information and does not replace individual advice. The information in the purchase contract is the only valid information. Subject to changes, errors, typos and prior sale.

Condition: used, Year of construction: 2010, functionality: fully functional, – Polish manufacture – Very good condition – DTR documentation – Year of manufacture: 2010 – Vibrating trough – Autoreverse TECHNICAL PARAMETERS: – Inlet width: 400 mm – Inlet height: 120 mm – Main motor: 37 kW – Feed motor: 2 x 1.5 kW – 2 knives – Screen: 50 mm x 50 mm – Vibrating feed table (length / width): 4500 / 430 mm – Vibrating trough motor power: 3 kW – Upper toothed feed roll – Lower toothed feed roll – Hydraulic cover for feed rolls – Rotor diameter: 400 mm – Rotor length: 430 mm – Dimensions (L/W/H): 650 x 200 x 190 cm Hsdpfx Aow H Rp Nobhenp – Weight: ~ 2500 kg

Condition: ready for operation (used), functionality: fully functional, The Rhule MGR 400 refrigerated mixer is an industrial solution engineered for mixing, marinating, and vacuum processing of food products. It is utilized in production environments to homogenize mixtures while precisely controlling temperature, making it especially valuable on meat processing lines. This ensures consistent product quality and improved absorption of ingredients. With its combined mixing, vacuum, and cooling system, the Rhule MGR 400 optimizes production performance. Operating under vacuum enhances marinade penetration, while integrated cooling maintains the product’s thermal stability. As a result, it directly contributes to improving material yield and batch consistency. The variable speed mixing arms allow fine-tuned adaptation to different product types. This machine integrates seamlessly into food processing lines, either upstream of packaging or cooking stages. Its large capacity enables significant batch volumes, all while maintaining uniform quality. Additionally, its stainless steel build and closed-system design ensure a high level of hygiene, which is essential for industrial environments. Ultimately, the Rhule MGR 400 refrigerated mixer is tailored for optimized production. It combines technical performance, parameter control, and waste reduction. As a reconditioned machine, it presents a strategic solution for maintaining high productivity while controlling investment costs. Technical specifications: - Vacuum pump - Bowl capacity: 400 L - Usable volume: approx. 300 L - Power supply: 400 V – three-phase Hjdpfx Aboy Ew Snohjnp - Frequency: 50 / 60 Hz - Power: approx. 8.9 kW - Mixing arm speed: up to 25 rpm - Vacuum system: up to 90–95 % - Integrated cooling system (refrigerant type R404A / R452a) - Lifting loader capacity: 400 kg - Dimensions: approx. 2900 × 2800 × 3000 mm - Weight: approx. 1400 kg

Condition: as good as new (ex-display), MIG/MAG welding machine with inverter technology. Three-phase power supply, welding machine. Master Software TERRA PME included. Technical data Hedow Rm Saspfx Abhonp Power Supply: Voltage (50/60 Hz): 3x400V ±15% Maximum input power: 22.9 kVA Maximum input current: 31.1 A Power factor PF: 0.73 Efficiency: 89% Slow-blow fuse: 25 A Open-circuit voltage: 61Vdc IP protection class: IP23S Insulation class: H Power cable: 4x3mm² – 5 m Welding: Setting range: 3–400A Duty cycle MIG/MAG at 40°C: 40% – 400A, 100% – 330A Duty cycle MIG/MAG at 25°C: 100% – 400A Wire diameter: 1.0–1.2 mm (optional 0.6–1.6 mm) Flux-cored wire diameter: 0.9–2.4 mm Aluminum wire diameter: 0.8–1.6 mm Wire feed speed: 0.5–22.0 m/min Wire spool diameter: Ø 200/300 mm Remote control connection: yes

Condition: excellent (used), fuel type: diesel, color: yellow, lifting height: 18,000 mm, mast type: telescopic, Year of construction: 2019, operating hours: 664 h, General Information Year of manufacture: 2019 Technical Details Number of cylinders: 4 Drive: Wheel Unladen weight: 14,300 kg Functionality Mast: Telescopic (3-section) Mast length: 18 m Lifting capacity: 4,000 kg CE certification: yes Condition Technical condition: very good Visual condition: very good DIECI PEGASUS 40.18 400 EX DEMO TELESCOPIC HANDLER YEAR OF MANUFACTURE: 2019 DRIVE: 4X4X4 MAX. LIFTING CAPACITY: 4,000 KG MAX LIFTING CAPACITY AT 15.3 METERS: 500 KG MAX WORKING HEIGHT: 18 METERS EXTRA HYDRAULIC FUNCTIONS 400° ROTATION TYRES: 405/70/20 2X JOYSTICK CONTROL 1X RADIO REMOTE CONTROL CE CERTIFICATE KUBOTA ENGINE TYPE: V3800-T 4 CYLINDERS Hnjdpfx Abjuxrv Tehsp 101 HP WATER COOLING MAX. DRIVING SPEED: 30 KM/H PALLET FORK HOOK TYPE: BUB 2448 OWN WEIGHT: 60 KG MAX. CAPACITY: 4,000 KG LARGE HYDRAULIC WINCH TYPE: BUD 4475 OWN WEIGHT: 410 KG MAX. CAPACITY: 3,000 KG BUCKET VOLUME: 1.20 M3 ONLY 664 DEMO HOURS!!!!! FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPAÑOL WE SPEAK ENGLISH

Condition: excellent (used), Miyachi Unitek HF25 DC Resistance Welding System controller. The unit is fully functional, starts up correctly, the display works, and all functions respond as expected. The screen displays the message “EMERGENCY STOP – OPERATOR ACTIVATED,” which indicates that the emergency stop circuit has been activated – this is not a malfunction of the device. This model is designed for precise control of the DC resistance welding process. It features a clear display, numeric keypad, the ability to program welding parameters, and RS-232 and RS-485 communication interfaces. Power supply: 380–400 V AC, 50/60 Hz. Technical specifications: Hnjdpfx Ajzma Sdsbhsp Manufacturer: Miyachi Unitek Model: HF25 Type: DC Resistance Welding System Power supply: 380–400 V AC, 50/60 Hz Max. output current: 2400 A RMS Max. open-circuit voltage: 10 V Interfaces: RS-232, RS-485 Inputs include: FOOT SWITCH, AIR VALVE DRIVER, VOLTAGE SENSE, WELD HEAD Condition: Fully functional. Visual condition matches the photos – normal signs of use. The power cord has been repaired (insulated area visible in the photos). The repair does not affect the operation of the device, but this information has been included for full transparency of the sale.

Condition: used, empty load weight: 6,520 kg, maximum load weight: 23,480 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 05/2019, loading space length: 8,610 mm, suspension: air, tire size: 235/75R17,5 ---/140J, color: other, gearing type: other, front tire size: 235/75R17,5 ---/140J, rear tire size: 235/75R17,5 ---/140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading area length drop deck approx. 6.50 m, loading area length total approx. 8.60 m, loading height approx. 900 mm, , Vehicle is offered on behalf of a bank, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Hnsdpozl Txnefx Abhjp

Condition: excellent (used), For sale: Bernardo KFM 500 M edge chamfering machine, designed for precise chamfering and deburring of parts made of steel, stainless steel, aluminum, and other metals. This machine is ideal for preparing parts for welding, removing sharp edges, and creating even chamfers. Its robust construction and adjustable chamfering angle ensure accurate and repeatable machining. The machine is sold with the operating manual and a set of cutting blades, as shown in the pictures. Technical data: Manufacturer: Bernardo Country of manufacture: Austria Model: KFM 500 M Hedpfoziww Nex Abhenp Year of manufacture: 07/2019 Machine number: PWA-190707 Type: edge chamfering machine Motor power: 0.55 kW Power supply: 400 V Frequency: 50 Hz Rated current: 1.48 A Recommended protection: C16 Weight: 33 kg Application: The device is designed for: chamfering edges, deburring parts, preparing material for welding, machining steel, stainless steel, and aluminum, creating precise chamfers for welds. Included: Bernardo KFM 500 M chamfering machine, operating manual, set of cutting blades (shown in the pictures), other items shown in the pictures. Condition: The device is used and in good visual condition. Normal signs of wear and tear are visible, consistent with its use. The machine is sold exactly as it is and with all the components shown in the pictures.

Condition: used, empty load weight: 3,690 kg, maximum load weight: 9,810 kg, overall weight: 13,500 kg, axle configuration: 2 axles, first registration: 09/2019, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, loading space volume: 48 m³, suspension: air, tire size: 285/70R19,5 148J, color: other, gearing type: other, front tire size: 285/70R19,5 148J, rear tire size: 285/70R19,5 148J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Lashing rings, , --  Misprints, errors and changes reserved, Sample pictures --, More details at: !, More details: ! Hnodszlim Iopfx Abhjp

Condition: excellent (used), Year of construction: 1979, power: 38 kW (51.67 HP), stroke length: 400 mm, table width: 1,320 mm, table length: 1,000 mm, total height: 6,300 mm, distance between stands: 1,000 mm, ram adjustment: 200 mm, Trimming press ERFURT type PKZ 400/1000 Capacity, ton 400 Hnjdpfelnlpxox Abhjp Stroke 400 mm Table size (left to right) 1000 mm Table size (front to back) 1320 mm Ram (left to right) 800 mm Ram (front to back) 1060 mm Ram adjustment 200 mm Strokes 18 min-1 Shut height 685 mm Upper ejector: power 20 t, stroke 125 mm Driving power 32 kW Driving power overall 38 kW Required space 2550 x 2700 mm Height of machine above floor 6300 mm Weight without bottom ejector 33,8 t Total weight 38,5 t