Used Fom Industrie Single Head Saw for sale (46,693)

Condition: used, The MG TLG single-head up-cut saw is equipped with a Ø 350 mm blade and a rotating table for cuts at 45°, 90°, and intermediate angles. The machine offers a maximum cutting height of 125 mm. Technical Specifications Blade diameter: 350 mm Table rotation: 45° – 0° – 90° Pneumatic clamps Three-phase motor 220/380 V or single-phase 220 V Motor power: 2 HP (three-phase) / 1.5 HP (single-phase) Cutting speed: 42 m/s Built-in automatic lubrication system Maximum cutting height: 125 mm Movable support turret Dimensions Length: 800 mm Pgodpfxezcfdxs Abpsr Width: 700 mm Height: 1,225 mm Weight: 150 kg

Year of construction: 2021, condition: excellent (used), functionality: fully functional, Year: 2021 - technically efficient, ready to work – after full service - disc diameter: 600 mm - cut from below - cooling installation Psdpfxoy A Htpj Abpjgr - vertical pneumatic clamps - work area lighting - compressed air preparation station

Year of construction: 2025, condition: new, New single head saw with up-feed blade Ø 300mm and manual positioning of vertical axis FOM INDUSTRIE PANDA 300 ECHO Podpfx Aef Nwxwebpegr - Tungsten carbide saw blade Ø 300mm - Hydro-pneumatic feed of saw blade - Spray mist blade lubrication system - Cutting area guard kit - Two vertical vices - Two horizontal vices - Set up for the extraction of chips and fumes

Year of construction: 2025, condition: new, XZ100228 Single head sawing machine Ø 400 mm for aluminium and PVC with manual blade down-feed and pneumatic vices FOM INDUSTIRE SIKA PLUS M Machine in stock Configuration: - Aluminium and PVC cutting machine with CE certification - Tungsten carbide saw blade Ø 400 mm - Manual blade lowering (with lever) with pneumatic servo control to reduce operator stress Pgedpfx Abjpl Tgmepsr - Side support plates on both sides - Blade motor power 2.2 kW - 2850 rpm - Self-braking motor with blade stop in less than 10 sec - Cutting angle from 45°Lh to 45°Rh on vertical axis and 45°Rh to 90° on horizontal axis - Intermediate angles with mechanical stop - Cylinder blocking involuntary head lowering - Double working pressure servo-controlled in low pressure - 1 pneumatic vertical vice - 2 pneumatic horizontal vices - 1 safety servo-valve for each pneumatic horizontal vice - Conical anti-crushing buffers - Worktable and turntable structure in stabilized cast iron - Motor transmission by belt - Saw blade holding spindle Ø 32 mm - Spray mist blade lubrication system - Integral blade guard in rest position - Set up for the extraction of chips and fumes

Year of construction: 2026, condition: new, functionality: fully functional, Standard configuration: ▪   No. 2 carbide tungsten saw blades Ø 600 mm ▪   Integral safety casing for cutting area protection ▪   No. 4 vertical vices ▪   2 Retractable pneumatic intermediate supports ▪   Loading roller conveyor 400 (Useful length 2,2 m) on mobile head ▪   Minimum quantity lubrication (MQL) with pure oil ▪   Greasing gun ▪   Set up for the extraction of chips and fumes ▪   15' touch screen control panel (IP65) on linear guides ▪   PC operator interface ▪   Operating system Windows ® ▪   Real time numerical control ▪   FSTCUT4 software licence ▪   Software management of cutting in minimum and super-minimum mode for special lengths Podpjztr Rrefx Abpegr ▪   Software management of cutting in oversize mode for special lengths ▪   Software management of cutting in trimming mode for cut ends with variable angles ▪   Teleservice for the first 12 months Optional equipment installed on the machine: ▪ PR-29060 Profile lifting kit ▪ PR208207 Third intermediate pneumatic retractable support ▪ PR206695 Chip conveyor belt ▪ PR203359 Label printer ▪ PR203356 Licence for step-by-step cutting software, complete with 1 extra surface on fixed head, horizontal clamps on fixed and mobile head (no. 2), 90° cuts, two-hand control ▪ IV33160 Vacuum cleaner for extraction of chips and fumes

Condition: reconditioned (used), functionality: fully functional, Effective cutting length: 4000 mm Blade diameter: 500 mm Pneumatic tilting of the cutting heads. Pedpfx Abezluiuspsgr

Condition: as good as new (ex-display), Year of construction: 2005, ACCEPTANCE OF SELF feed head is held on the guides of hardened cylindrical surface and additionally treated grinding. Three-phase motor power 3HP 2800 rpm / min. Output frontal saw blades with cutting heads. Feed discs cost of delivery SEMI AUTOMATIC DOUBLE MITRE SAW Technical Data Right head displacement by means hand wheel Reading of the cutting dimension on high precision metric scale with micrometric adjustment Sliding of the moving head by means of ricirculating ball bearings on rectified and tempered guides Radial sliding of the sawing group Podpfx Absb Rnv Sepsgr Full protection of the sawblades by means of safety hoods with automatic closing Pneumatic heads tilting at 90°/+ 45°/-45° Possibilty to mount sawblades Ø 500 - 530 - 550 mm 2,2 Kw (3 HP) 3 phase motors - 2800 r.p.m. Sawblade shaft Ø 30 mm Cutting lenghts 4000/5000/6000 mm Working pressure 7 bar Overall dimensions 524-624-724x139x155 cm Weight 1200 - 1350 - 1500 Kg Standard Equipment Horizontal pneumatic clamps Automatic lubrication by means of nebulizer Air filter Air gun Service spanners Optionals Reading of the cutting dimension on digital display Turning vertical clamps kit Pneumatic central support Manual central support Right head in feed roller conveyor Semi-automatic reduced cut modification c/w in feed roller conveyor Vee notch device for PVC profiles Micro-spray nebulising device Pneumatic support for long bars cover customer Startup type negotiated Description Notes Saw 2 a head for precision cutting of aluminum profiles GAMMA. Precise double miter saw for serial production of blanks at an angle of 90 ° and 45 °. Convenient and safe execution of multiple cutting operations. Automatic positioning of the moving cutting head. Automatic positioning of the moving cutting head. Adjustable stroke discs. The angles of inclination of the cutting head 45 °, 90 °, easy pneumatically. Intermediate angles are adjusted manually using the bumper and angular scale. LENGTH OF CUT = 4000 5220 x 1390 x 1460 mm Weight 1200 kg.

Year of construction: 2007, condition: used, Vertical CNC Machining Centre designed for the machining of aluminium, PVC, steel, and light alloy profiles, ideal for the production of windows, doors, curtain walls, and light metal structures. Technical Specifications: 4 controlled axes Working table: 4,000 mm X-axis travel: 4,270 mm Y-axis travel: 1,040 mm Z-axis travel: 430 mm A-axis rotation: from -15° to +195° FOM electrospindle: 4 kW Spindle speed: 12,000 rpm Tool holder: ISO 30 Pgedpfx Abszlpnlspor Tool magazine: 4-position ISO 30 4 pneumatic clamps with automatic positioning Retractable left pneumatic stop Right pneumatic profile positioning stop Minimum quantity lubrication (MQL) system with pure oil Machine weight: 2,500 kg Applications Ideal for the machining and production of: Aluminium windows and doors Doors and windows Curtain walls Industrial aluminium profiles Aluminium and light alloy fabrication

Year of construction: 2003, condition: reconditioned (used), functionality: fully functional, IDRACAM Software X-axis, travel: 3550 mm Y-axis, travel: 1100 mm Pgodpfx Abezpv A Repjr Z-axis, travel: 425 mm Electro-spindle rotation: 0°/90°/180° Working capacity: X-axis = 3500 mm Y-axis = 540 mm with electro-spindle in the vertical position at 90° Y-axis = 460 mm with electro-spindle in the horizontal position at 0° or 180° Z-axis = 300 mm with electro-spindle in the vertical position at 90° Z-axis = 250 mm with electro-spindle in the horizontal position at 0° or 180° Spindle: ISO 30 - power: 4 kW Rotation speed: 12000 rpm Tool magazine Used machine, CE compliant

Condition: used, Single Head Cutting Saw – FOM Spring 45 A - Available with loading and unloading roller conveyors. Professional single head up-cut saw designed for high-precision cutting of aluminium profiles and light alloys. The FOM Industrie SPRING 45 A is equipped with pneumatic head tilting and hydro-pneumatic blade feed. Main features - Ø 450 mm tungsten carbide blade - Pneumatic head tilting around the horizontal axis - Cutting positions: 20° right 45° right 90° 45° left 20° left - Mechanical stops for intermediate positions with cushioned support, manually adjustable on a wide graduated scale - Hydro-pneumatic blade feed - Direct motor/blade transmission - Full cutting area guarding with automatic closing system Equipment Psdpoy Ukr Tjfx Abpogr Horizontal clamps Vertical clamps 2.2 kW blade motor Integrated safety system Robust structure for continuous professional use Applications Ideal for: window and door manufacturers aluminium processing industrial profile cutting light metal fabrication production of frames and curtain walls

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: C0202166, We offer this used Fom Industrie BLITZ ALVA 500 double miter saw, manufactured in 2011. Manufacturer: Fom Industrie Model: BLITZ ALVA 500 Year of manufacture: 2011 Condition: used Podpfxozh A Tgj Abpjgr Category ID: 804 Type ID: 1498 Machine type: Double miter saw If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Year: 2016 - technically efficient, ready to work - after full service - only 69 hours worked - spindle 2.2 kW - axis movement range: X – 2675 mm, Y – 355 mm, Z – 224 mm - pneumatic rotary table A: -90° / 0° / +90° - 4 pneumatic clamps - magazine for 6 tools - automatic quick tool change system - cooling and lubrication installation - operator panel, Windows 7 with online access - protective cabin - weight 1400 kg, dimensions: 3600 x 1660 x 1900 mm Pgodpfjtq R Saox Abpjr

Year of construction: 2021, condition: as good as new (ex-display), functionality: fully functional, Single-head cutting machine OMC GIOBI 600 with measuring roller conveyor FOM INDUSTRIE ASSOMAK VS 6m and inlet conveyor PORTER 4,2m Year 2021 Condition: ex-demo, like new - Saw blade D 600 mm - Hdro-pneumatic feed - Inclination is pneumatic on both sides, with fixed graduations of 22.5° - 45° - 90°. For intermediate gradations, with manual mechanical stop - 2 vertical and 2 horisontal clamps - Spray mist blade lubrication system - Integral pneumatic protection - ASSOMAK VS 6m: measuring roller conveyor with digital display and manual length stop positioning - Minimum cut 0 mm - Maximum cut 6000 mm - Measurement reading by encoder - Positioning precision ± 0,5 mm - Loading capacity per linear meter: 10 Kg - Width of bar resting surface: 200 mm Podey Erwfepfx Abpsgr - PORTER 4,2m: inlet roller conveyor - Loading capacity per linear meter: 10 Kg - Width of bar resting surface: 200 mm

Condition: new, Year of construction: 2024, XX-11136 End milling machine FOM INDUSTIRE MISTRAL 26A Machine in stock Standard configuration: - End milling angle 45° Rh, 90°, 45° Lh and intermediate angles - Milling tool unit rotation speed 7000 rpm - Max. milling tool size Ø 175 mm - Automatic feed with rapid approach controlled by milling tool unit photocell - Quick change milling tool unit - Milling tool unit balancing system - Milling units magazine with 9 slots Podpfx Abehyuglopjgr - Spray mist blade lubrication system - Carriage stroke: X max= 350 mm - Milling depth: Y max = 65,5 mm - Maximum milling unit height: 125 mm - Working capacity: see attached diagram - Patented system that allows profile positioning without the need for goniometries - Set up for the extraction of chips and fumes - Integral safety casing around work table with opening lock - Double working pressure servo-controlled in low pressure - In set Cutter sleeve for milling units - Horizontal and vertical vices - 8-positions star-shaped length stop

Condition: new, Year of construction: 2025, Single head sawing machine for aluminium FOM INDUSTIRE PANDA 300 ECHO with measuring system DIGISTOP 4m, measuring caliber DIGIBAR 3,3m and inlet conveyor PORTER 4,2m Machine in stock Configuration: Single head saw with up-feed blade Ø 300 mm and manual positioning of vertical axis FOM INDUSTRIE PANDA 300 ECHO: Pedpewh Rlgjfx Abpjgr - Tungsten carbide saw blade Ø 300 mm - Hydro-pneumatic feed of saw blade - Spray mist blade lubrication system - Cutting area guard kit - Two vertical vices - Two horizontal vices - Set up for the extraction of chips and fumes Electronic measuring system DIGISTOP 4m: - Min. cutting length 0 mm, maximum 4000 mm - Friendly software using icons and function keys - Accuracy 0.1 mm - Manual piece execution - Measurement list editor - Editor of measurement received by radio or net - Removal of piece after every cut - Visualization of reference for each measurement - Roller width 200 mm Wireless electronic measuring bar DIGIBAR 3,3m - Minimum measure 140 mm - Maximum measure (without extension) 1600 mm - Maximum measure (with extension) 3300 mm - In set includes two extensions: 1400 mm and 1700 mm - Accuracy 0.1 mm - Weight 2190 gr - Power supply 4 recharg. batt. AAA - Absolute measuring system (no recalibration required) - 2 LCD lines 16 characters - Industrial keyboard 6 keys protected - 2 LED signal for immediate display of the state of instrument - Ergonomic Handle with a simple use button for measurement capture Inlet roller conveyor PORTER 4,2 m: - Loading capacity Kg. 10 per meter - Plastic rollers, width 200 mm - Vertical plastic rollers

Condition: new, Year of construction: 2023, Corner crimping machine FOM INDUSTRIE BAIHA L Machine in stock - Max. profile height 200 mm Pgjdpjd E Eimefx Abpor - Hydro-pneumatic drive - Three pneumatic clamps - Min/max height of blade position from 0 to 180 mm - Kit for profile support - Digital counters for profile positioning - No. 2 right tool-holder - No. 2 left tool-holder - No. 2 knives 2 mm thickness - No. 4 tools 5 mm thickness - No. 2 fold-away profile fences

Year of construction: 2025, condition: new, XX100292 New CNC Machining centre with 4 controlled axes FOM INDUSTRIE FMC 470 Pgjdpfx Aoiv Imnjbpor Machine in stock and ready for shipping Standard configuration: - Liquid-cooled electrospindle 7 kW, 20,000 rpm (HSK-F63) - 9 location tool magazine on head (HSK-F63) - No. 2 pairs of pneumatic vices with positioning through the travelling column - No. 2 pairs of low profile jaws for clamping wide profiles - Left pneumatic reference stop - Minimum quantity lubrication (MQL) with pure oil - Central automatic greasing system and device for manual greasing - Chip and waste collection tank in base - Perimeter guard system with automatically opening, front retractable doors - X FLOW (automatic orientation of lubricant nozzles) - Control: POWER-D - Movable control console - 24” display - FST CAM 4 program Optional equipment installed on the machine: - PR202941 Fixed tool magazine for 8 positions in the center on the machine base - PR202962 Device for checking the integrity and measuring tool length - ZR204058 Pendulum mode with multiple workpieces (2 work areas, 4 workpieces) and processing of non-standard lengths with X-PAL: • Two pairs of additional vices with independent positioning • Transformation of std vices into vices with independent positioning • LED bar • Profile positioning software • Software for viewing the progress of the processing cycle • Device for measuring profile length • Second X-FLOW • Right pneumatic reference stop • Pendulum control software • Safety devices for pendulum processing • Tunnel for oversized profile machining • Software to manage oversized machining operations • ''Clock'' time calculation module program - PR202971 Data import software in accordance to FOM protocol and wireless optical bar code and QR code reader - ZP715010 Module for rigid tapping and chase tapping - PR202957 Hinged belt conveyor with ramp - PR203389 Rear chip collection tank - PR202975 Tool set A3/HSK F63 - PR202967 Angle head with vertical disc Ø 230 mm - PR202968 Cone with horizontal disc Ø 250 mm - PR204497 Holder HSKF63 with cutter Ø 200 x 6 mm - PR203072 Software adjustment of the vice pressure 3,5 - 7 bar - ZP714611 License for the office version of FST CAM 4

Condition: like new (used), Year of construction: 2019, functionality: fully functional, 5 axis double head sawing machine FOM INDUSTRIE KEOPE E5 6.6 m Year: 2019 Condition: excellent, as new Technical specifications and equipment installed on the machine (standard and options): - No.2 new FOM carbide tungsten saw blades Ø 600 mm - Minimum cutting capacity between two heads: 470 mm (with heads at 90°) - Maximum cutting capacity between two heads: 6.6 m - No.4 vertical vices and No.2 horizontal (for step-by-step operation) - Micro-drop pure oil blade lubrication system - Set up for the extraction of chips and fumes - Blade motors, three phase 5 HP (3.7 kW) - 230/400 V- 50Hz. Blade rotation speed 2400 RPM - Head rotation between 22.5° and 140° (Y and Z axes) with electronic control (vertical axis) - Internal blade inclination between 90° and 45° (W and U axes) with electronic control (horizontal axis) - Handling of mobile head (X axis) with electronic control - Mobile head max. speed 25 m/min. - Hydraulic saw blade feed (adjustable blade exit speed - quick return) - Profile lifting kit - Loading roller conveyor length 2.2 m, width 400 mm (on mobile head) - No.3 intermediate pneumatic retractable support Pedpfewk R A Dex Abpogr - Chip conveyor belt - Label printer - FSTCut software - Software for special cut-off (beyond measure and super minimum) and profile bevel cut for 45° cuttings - Step-by-step cutting software, complete with 1 extra surface on fixed head, 90° cuts, two-hand control - Vacuum cleaner

Condition: used, Year of construction: 2012, Automatic loading table Pgjdpsy Egzxefx Abpjr Milling unit with 10 spindles, also inclined Swing machine FOM Spring 50 blade 500 mm horizontal Automatic unloading table

Condition: used, Double Head Cutting Saw – FOM ALVA 450 B Professional double head saw for cutting aluminium, PVC and light alloy profiles, ideal for window and door production. Year: 2002 Carbide blades Ø 450 mm Three-phase motors 3 HP (2.208 kW) – 2800 rpm – 230/400V – 50 Hz Direct transmission motor – carbide blade Blade shaft Ø 32 mm Head inclination: 90°   45° external   22.5° external   Intermediate angles with mechanical stop and reading on graduated vernier First head fixed Second head mobile: automatic positioning with manual option Positioning speed (automatic) of the mobile head: 12 m/min Positioning accuracy of the mobile head: +/- 0.1 mm Minimum cutting capacity between the two heads: 300 mm (reducible with dedicated program) Maximum cutting capacity between the two heads: 4000 mm Hydro-pneumatic blade feed (adjustable forward speed – rapid return) Electrical panel separated from pneumatic panel Dual operating pressure with low-pressure servo control Air consumption per working cycle: 28 Nl Vertical and horizontal pneumatic clamps Mist lubrication system Prepared for chip and fume extraction Operating pressure: 7 bar (adjustable) Podpfx Aeyyliksbpegr Roller table for mobile head (3 m) Machine in working condition.

Condition: new, Year of construction: 2025, functionality: fully functional, Company Tekstura d.o.o. sales new FOM Industry machines only in Slovenia. Podjxu Uylepfx Abpjgr

Year of construction: 2007, condition: good (used), - Used machine - Saw blade: 400 mm - Saw blade tiltable 0° left to 0° right - Hydropneumatic saw blade feed - Horizontal and vertical clamps - Motor power: 1.8 kW / 400 V - Cutting width: 242 mm - Cutting height: 140 mm - Incl. measuring roller conveyor 4000 mm Pgodpfx Ajy E Itpsbpor - With digital readout and handwheel - Ex-stock, loaded free of charge

Year of construction: 2017, condition: excellent (used), functionality: fully functional, FOM Industrie ARGO 70, a 3-axis CNC machining center for drilling and milling operations on steel or aluminum profiles. TECHNICAL DETAILS X-axis (top side only): 6,780 mm X-axis (top side + heads): 6,630 mm Y and Z axes for machining on the top and back sides: 545 mm x 295 mm Y and Z axes for machining on 3 profile sides: 440 mm x 295 mm Pneumatic rotation: 0°, 90°, 180° Spindle speed: max. 17,000 rpm Profile width: max. 545 mm Bar length: max. 6,780 mm Number of milling spindles for aluminum: 1 Tool changer positions: 12 POSITIONING AND CLAMPING Clamping devices with controlled and independent positioning: 4 Number of pneumatic clamps: 4 Max. number of clamping devices: 8 MACHINE DETAILS Main motor: 6.5 kW Total connected load: 8.3 kW Speed, X-axis: 100 m/min EQUIPMENT - Multiple workpiece capability - Tool clamping system - Pendulum operation - Minimum quantity lubrication - Chip conveyor - Rigid threading - Air cooling Pjdpfxelu E Nas Abpsgr - Tool holder - Tool storage with 12 positions on the head - Operator terminal with PC - 23” screen - 3D visualization for FomCam

Year of construction: 2023, condition: like new (used), 4-axis machining center Usefull lenght: 3200 mm Max section profile: 160x 210 mm a-axis: -15°; +195° Pgedpfx Abey Ec Iuepor 4 pneumatic clamps automatic positioning of clamps 2x endstops motor 5kW/20000 RPM : ISO 30 Centralised automatic lubrication system automatic toolchange with 10 positions ONLY 148 hours

Condition: used, Year of construction: 2008, functionality: fully functional, Single-head welding machine Pjdjzpyfcepfx Abpsgr