Used Frame Saw With Oscillating Frame for sale (15,119)

Year of construction: 1979, operating hours: 10,968 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: Werk-Nr. 8725, INFORMATION REGARDING SALES AND CONTRACT CONDITIONS: MACHINE CONDITION: This ESTERER frame saw, model LSH 65, was in impeccable operational use until three years ago and remains serviceable. The equipment includes both a stationary control panel in front of the saw frame and a mobile control panel on the tensioning carriage. A hydraulic tensioning device for adjusting the saw blades in horizontal and vertical directions is mounted on the frame. The electric motor drive with gearbox is included in the offer. HANDOVER AND PRICE: Handover will take place after full payment of the purchase price. The price is ex foundation and is payable on-site directly to the seller after conclusion of the contract and prior to dismantling. WARRANTY: The seller assumes no warranty, neither before nor after handover of the machine – sold as seen. The buyer has no right of withdrawal. DISMANTLING: Complete dismantling, including lifting gear, tools, and transportation, is the responsibility of the buyer. Handover of the machine shall take place on-site. Any damage caused to the building during dismantling will be repaired by the buyer or charged separately. The purchase transaction will be mutually confirmed by means of a sales contract. Hnedpfx Aszgr Iqjftot

Condition: used, Year of construction: 1977, Wurster and Dietz GDZ 600 GES Year of construction 1977 Passage: 71 cm stroke: 600 mm with swing frame with water-cooled guides Hedpfx Afjqpdi Uetent with hydraulic saw clamp Jansen with riving knife with saw blades with templates with fence immediately available Location: Austria, near Klagenfurt

Condition: used, Year of construction: 1976, Esterer LSH Sash Saw 1976 - Automatic cantilever adjustment - Hydraulic roller lifting - Swing frame - With templates - With magnetic holder - With Jansen saw tensioner - With Esterer Arta-C riving knife - With drive motor - With saw blades - With intermediate gear Clearance width: 650 mm Clearance height: 90–620 mm Stroke: 500 mm Feed speed: 0–8 m/min Feed power: 3.5 kW Pulleys: 900 mm Total weight: 5.4 t Fits the foundation of the Esterer LD65 sash saw. Has been stationary for around 15 years. Dismantled and stored approx. 3 years ago. Hnodpfxoyhduyo Aftet Annual cut approximately 3,000 solid cubic meters. Very good condition – immediately available – fully functional Location: Austria, near Graz

Condition: used, Frame Saw Esterer LSH Year of Manufacture: 1968 Clearance: 65 cm 500 mm stroke Oscillating frame Automatic overhang adjustment Hydraulic roller lifting With splitter wedge With drive motor With gear transmission With saw blades Hnjdjw Dn S Aopfx Aftet With hydraulic saw tensioner With suspension system With templates With log carriage Weiss HdT-L, Year 1996 (can also be sold separately) The machine has been out of operation for quite some time and should be thoroughly checked and overhauled. Location: Austria, near 8700 Leoben

Condition: excellent (used), functionality: fully functional, Well-maintained W&D gate-type press, model GXW 71 VH. Frame width 710 x 710 mm. Stroke 500 mm. Hedpfezz Iu Aex Aftent Infinitely variable hydraulic feed. Hydraulic cylinder lift with adjustable cylinder pressure. Drive. Saw attachment. Electric remote control. Clamping carriage and wedge with electric adjustment. From a small operation. Also interesting as a source of spare parts.

Condition: good (used), For sale: Wood processing line: Hnedpfxoyhzhho Aftot - FOD DTRA 63 bottom-driven frame saw - 2 units - Log infeed conveyors - cross and longitudinal - Conveyors - Trolleys - Rails Machines are operational and in working condition Basic technical data for the FOD sawmill: Horizontal clearance mm 650 Saw frame stroke mm 520 Clearance between rollers mm 80-570 Minimum log diameter mm 100 Maximum log diameter mm 550 Minimum log length mm 2200 Main shaft rotation speed rpm 300 Feed per main shaft revolution mm/1 rev. 4 - 30 Maximum number of saw blades pcs. 12 Main motor power kW 45 Feed motor power kW 4 Hydraulic unit motor power kW 2.2

Condition: good (used), functionality: fully functional, High-performance band saw / HIGH SPEED FRAME SAW EWD HDN 600 TECHNICAL DATA: Well-maintained, high-performance band saw Frame width: 710 x 735 mm Stroke: 600 mm Speed: 310 rpm Fully hydraulic with automatic overhang adjustment Hydraulic saw tensioner and saw chuck Drive motor and gearbox Hnjdpoz Aqlmefx Aftet Electrical control cabinet with control system Splitting wedge, type AVER, with hydraulic drive In very good condition, (complete overhaul available upon request!) Excellent condition with remotely controlled clamping carriage and 1 band saw EWD LSH as well as one band saw EWD GDZGE 600 in stock!

Condition: excellent (used), 1 saw frame in very good condition 710 mm frame width with 8 guide shoes in good condition Hnodpelni Uqsfx Aftst

Year of construction: 1982, condition: ready for operation (used), We offer you frame saws: 1. Frame saw Bogli 71 with infeed and auxiliary car, and distribution device behind the sawmill. Sawmill type: Bogli Marathon 71 Hedpjn I Udxjfx Aftsnt Frame: 710 mm, hydraulic sawmill Hydraulic lifting and lowering of the saw blade 55 kW motor Car with auxiliary car, track gauge 90 cm Distribution device behind the sawmill All as shown in pictures no. 1, 2, 3, 4 Price is negotiable. 2. Saw gate Linck E 28-28 Frame stroke 600 mm All as shown in pictures no. 5, 6, 7, 8 Price is negotiable. 3. Saw gate Linck with a loading car and a distribution device behind the sawmill. Saw frame Linck 71 – Frame width 710 mm – Feed rate 12 m/min – Fully hydraulic: hydraulic shifting of the saws, lowering and lifting of the saw blade Linck hydraulic loading car with additional equipment. Distribution device behind the sawmill (sack, wedge) All as shown in pictures no. 9, 10, 11, 12, 13 Price is negotiable.

Condition: excellent (used), functionality: fully functional, Complete sawing frame for EWD Esterer gate, type HDN 600 or HDS 600 with width adjustment. Includes Jansen double-yoke tensioner. Lightly used. Ideal for keeping spare parts in stock. Hsdpfxjzn Uv Hs Aftont

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, height adjustment type: hydraulic, input voltage: 380 V, passage height: 230 mm, We are offering these two refurbished Wintersteiger DSG 150 ECO frame saws, year of manufacture 2004. Machine type: DSG 150 ECO Voltage: 380 V Power: 11 kW each Hjdsydfgcjpfx Aftsnt Included free of charge is a Tensionmaster for crowning the blades and a set of blades valued at €2,000. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), functionality: fully functional, Hydraulic sharpening machine for band saws. Type Hydromat. Hnsdszdkbkjpfx Aftjt Also ideal as a spare parts machine.

Condition: used, Technical specifications: Max. blade diameter: 300 mm Cutting range: 45° Pneumatic clamping Blade guard Hnedpfxozht Saj Aftjt Pneumatic blade lifting Operating pressure: 6 bar Safety switch Power supply: 400 V Motor power: 2 x 1.5 kW

Year of construction: 1985, condition: used, Mayrhofer tension trailer Year of manufacture: 1985 Track width: 90 cm with auxiliary trailer Hsdpfx Aozl N Ekoftjnt immediately available – fully functional, but should be inspected/overhauled Location: Austria, near St. Pölten

Condition: used, Wide selection of used spare parts in good to very good condition for EWD Esterer HDE 71. Overhang plates, adjustment gearboxes for overhang adjustment, complete feed unit, saw frame, roller shafts with sprockets, hydraulic cylinders for roller lifting, chain housing, etc. Hnjdezht Hwspfx Aftst

Condition: excellent (used), Year of construction: 2016, Cutting Capacity 0° round (tube): 300 mm Cutting Capacity 0° round (solid material): 180 mm Cutting Capacity 0° rectangular horizontal (hollow section): 320 x 290 mm Cutting Capacity 0° bundle (tube): 320 x 160 mm Cutting Capacity -45° round (tube): 300 mm Cutting Capacity -45° round (solid material): 110 mm Cutting Capacity -45° rectangular horizontal (hollow section): 300 x 280 mm Cutting Capacity -60° round (tube): 200 mm Cutting Capacity -60° round (solid material): 80 mm Cutting Capacity -60° rectangular horizontal (hollow section): 190 x 200 mm Cutting Capacity +45° round (tube): 270 mm Cutting Capacity +45° round (solid material): 110 mm Cutting Capacity +45° rectangular horizontal (hollow section): 270 x 200 mm Table height, material feed: 800 mm Main motor: 2.6 kW Cutting speed, stepless: 20 - 100 m/min Saw blade size: 3660 x 27 x 0.9 mm Machine dimensions (L x W x H): approx. 1800 x 950 x 1400 mm Net weight: 585 kg Accessories / Special features: • Semi-automatic swing-frame metal band saw Hjdpfxsxz Dqme Aftsnt • After the cutting cycle is started, the vice clamps automatically – after completion, it returns to its starting position • For mitre cuts from +60° to -45° with frequency inverter • Suitable for cutting stainless steel, tool steel, hollow profiles, and solid materials • Fully hydraulically controlled sawing functions • Saw drive with low-maintenance, oil-lubricated worm gear • Robust three-phase motor • Motor equipped with overload protection • Ball-bearing turntable • Saw arm inclined at 25°, resulting in longer saw blade service life • Saw arm swivels from +60° to -45° • Chip removal brush for optimal saw blade cleaning and maintenance • Frequency inverter: allows stepless adjustment of saw blade speed from 20 - 100 m/min • BRP – Saw band monitoring • Hydraulic vice with manual quick-release for lateral adjustment • Limit switches control upper and lower saw arm positions • No need to set the upper end point • Length stop with scale, left-side removal 3 m • Cut detector • Swivelling control panel • Micro-spray device • 2 x roller conveyors: 3 m discharge left, 6 m feed right • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), functionality: fully functional, Complete saw frame for Esterer Gatter HDE or SS 71. Hnedpfx Asxw Ubneftst

Year of construction: 2004, condition: reconditioned (used), Walter double saw with TRKS 200 feeder double saw blade cutting height 200 mm, engine power 40 kW, chain feeder with drivers with adjustable prism for different diameters. Gear to regulate the speed of feeding the material. Hsdpfxsh R Tvte Aftjnt

Condition: used, Frame saw Pini & Kay FN65 HH Passage width: 650 mm Drive motor: 33 kW with saw blades with suspension with intermediate shaft with splitter wedge Immediately available Hnodpfsxvz Hzjx Aftst Location: Austria, near Graz

Condition: used, Year of construction: 2000, Used, good condition Make: Schneider Type 2406 Year of manufacture: 2000 Machine no. 910 CE-certified Cutting height 250 mm Saw blade tiltable between 90° and 30° (60°) Turntable rotatable 180° Motor power 7500 W, 400 V Saw blade diameter 650 mm Cutting height for rip cuts Continuously adjustable from 0 to 250 mm Cutting width adjustment for rip cuts 650 mm by transverse saw movement Motorized tilting with digital display Movable machine stand Automatic saw feed with two-hand control Laser kerf indicator, cross cut Pneumatic workpiece clamping on the right and left New price approx. €25,000.00 Extraction connection 100 mm Space required approx. 2800 mm x 2800 mm x 2000 mm Weight approx. 900 kg Storage location 97447 Gerolzhofen, free on freight, unpacked Handed over in as-is condition, as seen, without warranty or guarantee Hsdpfx Aswkvw Heftsnt

Year of construction: 1999, condition: excellent (used), functionality: fully functional, EWD gang saw line with edger and stacking system Complete cutting line from gang saw infeed to finished stacked lumber. The system includes automatic gang saw infeed, cutting with a high-performance EWD gang saw, material transfer, automatic edger, and a fully automatic stacking and packaging system. Technical specifications Cutting lengths: 2,500–6,000 mm Frame width: 710 mm Clearance height: 700 mm Saw stroke: 600 mm Gang saw speed: up to 320 rpm EWD H38 gang saw infeed EWD high-performance gang saw, type GDZ/GE 600 Main drive: 160 kW Hydraulic blade tensioning for up to 25 saw blades Heckel extraction and conveying technology Automatic edger, type FR 9 WD, with two movable sawing units Cross-cutting system as well as centering and feed system with pre-measuring Two fully automatic stacking and packaging systems Output up to 24 boards per minute per stacking system Automatic layer formation, spacer insertion, and package transfer Hsdpfxjzvyn Do Aftont

Year of construction: 2004, condition: ready for operation (used), A fully automatic Schüco glazing bead saw is available. Saw blade diameter: 400mm, cutting angle: 45°/90°, motor type: E63SP-2, speed: 2800rpm. On-site inspection is possible. Hjdswu Ez Nopfx Aftsnt

Condition: excellent (used), functionality: fully functional, 2 pieces of gate uprights, heavy-duty design, for Esterer Gatter HDE or SS 71, with cover. Hodpfxsxw Uf Te Aftent

Condition: new, Year of construction: 2026, For sawing, e.g., stainless steel, tool steel, hollow profiles, and solid materials. Two-pole drive motor enables saw blade speeds of 30 and 65 m/min. Monitoring of the saw blade tension electromechanically via microswitches. When the saw arm is raised, the lowering cylinder locks in the upper position via the solenoid valve – additional locking on the cylinder is therefore not required. Saw arm inclined by 25°, resulting in a longer service life of the saw blade. Precise and robust blade guides with adjustable carbide plates. After the cutting process is completed, the saw blade stops automatically in the lower end position. Lowering of the saw arm by gravity or manually. With continuously adjustable, constant saw arm lowering speed via hydraulic cylinder. Dimensions and weights Length approx. 1200 mm Width/Depth approx. 650 mm Height approx. 1800 mm Weight approx. 270 kg Electrical data Connection voltage 400 V Mains frequency 50 Hz Machine data Saw blade speed(s) 30 / 65 m/min Speed stages 2 Saw blade length 2450 mm Saw blade width 27 mm Saw blade thickness 0.9 mm Material feed Table height, material feed 925 mm Cutting ranges 0° round (tube) 220 mm 0° round (solid material) 120 mm 0° rectangular (lying, hollow profile) 230 x 150 mm 0° bundle (tube) 230 x 120 mm -45° round (tube) 160 mm -45° round (solid material) 85 mm -45° rectangular (lying, hollow profile) 160 x 90 mm -60° round (tube) 90 mm -60° round (solid material) 55 mm -60° rectangular (lying, hollow profile) 90 x 90 mm Art. No.: 3680001 Hnsdpfx Asg U Uv Reftot Location: In stock, 54634 Bitburg - immediately available -

Condition: good (used), WD creel type GXW 71, with spherical roller bearing in the main shaft. Suitable for all base plates of GXV and GXW creels. Fully hydraulic. With hydraulic saw tensioner. Ideal as a replacement sash gang or swing replacement. Hnedouql Ilspfx Aftjt