Used Frech Dak 315 for sale (4,610)

Condition: ready for operation (used), Year of construction: 1996, Clamping force: 3150kN, opening force: 10,000daN, closing stroke: 500mm, ejector force/retraction force: 159/82kN, ejector stroke: 120mm, mould height: 300-700mm, platen dimensions: 900x900mm, tie bar spacing: 550x550mm, tie bar diameter: 110mm, injection position: mm, max. injection force: 350kN, injection stroke: 430mm, injection plunger diameter: 50/60/70/80mm, shot volume: 563/811/1103/1441cm³, specific injection pressure: 1783/1238/909/696daN/cm², corresponding projected area: 177/254/347/453cm², max. projected area: 1050cm² at 300daN/cm², operating pressure: 140bar, dry cycle time (DIN 24480): 500, drive motor: 22kW, control: Datacontrol, length: 6900mm, width: 2000mm, height: 2800mm, weight: 14t, operating hours: 77,185h, shot count: at least 1,147,108, however not guaranteed due to a hardware replacement, adjustable opening stroke, with Striko Westofen W455 holding furnace, ABB IRB 2400 (M96/F10) industrial robot, and documentation. An on-site inspection is possible. Hnedpfeza E Rmsx Al Dor

Condition: ready for operation (used), Year of construction: 1989, An aluminum die casting system is available. Clamping force: 2200kN, opening force: 71kN, max. opening stroke: 430mm, mold closure: double toggle lever, pressure chamber: cold chamber, position: horizontal. Filling piston diameter min./max.: 40mm/70mm, pressure chamber filling volume min./max.: 293cm³/898cm³, casting pressure: 1990bar, blast area min./max.: 110cm²/338cm², output: 780 cycles/h. Clamping plate dimensions X/Y: 755mm/755mm, column spacing: 500mm/500mm, mold height min./max.: 250mm/600mm, min. mold dimensions X/Y: 296mm/296mm. Including crucible furnace, blow-out device, automatic dosing unit and 4x control cabinets. Documentation available. Hnodpfxjucfwpe Al Dor

Condition: used, Year of construction: 1999, closing pressure 3150 kN clamping plate 900x900 mm distance between columns 550x550 mm weight of the machine ca. 15,5 t lock stroke 500 mm capacity of ejector 159 kN ejector stroke 120 mm height of form 300-700 mm column diameter 110 mm Hnjdpfxevfhrte Al Dsr casting capacity 158 kN casting plunger stroke 250 mm injection plunger diameter 70,80,90,100 mm casting volume (DIN 24480) 514,791,1105,1455 cm 2 volume cast pressure 410,316,249,201 kp/cm² casting area 768,996,1265,1597 cm 2 Traverse Stroke 300 mm Used Die Casting machine DAM 315 S with Datacontrol for the use of magnesium alloys. Available from used machine stock. The machine is equipped with an electric furnace from Rauch Typ MMO 315E. Without sprayer. Recommendation from the manufacturer is some repair / general overhaul in the overhaul plant. It can be carried out in the scope of agreement.

Year of construction: 1988, condition: used, Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers -Industrial trailer with: 1-axle turntable steering -4 roller conveyors, rollers: Ø 65 x 365 mm -Load capacity: max. 6800 kg -Tires: solid rubber -Trailer hitch Hnsdpfx Alefk Smue Djr -External dimensions: 4760/2730/H585 mm -Own weight: 1100 kg

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, pressing force: 315 t, stroke length: 300 mm, Equipment: CE marking, Table dimensions (x-y/mm)  2150 x 1200 Hnsdpjzi Rbbefx Al Dor Ram dimensions X-Y (mm)  2000 x 1200 Stroke (mm)  300 Slide adjustment (mm)  200 Strokes per minute  5 - 50 Side window dimensions (x-y/mm)  800

Condition: good (used), Your contacts at our company: Mr. Andre Evering Mr. Marcel Brahms Mr. Simon Blank We offer you a used impact protection barrier for sale. Suitable for a double rack row: 2 x 1,100 mm rack depth + 200 mm rack connector Included in the scope of delivery: Hnedpfxedz Uxqo Al Dsr 01 x Impact protection barrier, used Material color: yellow Overall length: approx. 2,455 mm Overall length without base plate: approx. 2,400 mm Suitable for a double rack row Overall depth: approx. 150 mm Overall height: approx. 315 mm Profile dimensions: U 100 x 50 x 10 mm Material thickness: approx. 8 mm Hole diameter: approx. 13 mm Required floor anchors: 8 pieces Our services at a glance: (Prices upon request) Assembly, installation Please note our general assembly conditions Rack inspection Rack inspection according to DIN EN 15635, carried out in accordance with the requirements of BGR 234, visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: excellent (used), Decoiler FRECH 2 to x 650 mm, coil-inside-diam. 240 - 270 mm, coil-outside-diam. 1500 mm Hnsdpfx Ajzd R Ttsl Dor

Condition: excellent (used), Four-jaw spiral chuck Diameter 315 mm Hnsdpfxjlguy Sj Al Der Chuck height, flange 125 mm Short taper bore, size 6 Taper diameter 106.39 mm Pitch circle diameter for studs 133.4 mm 4 studs, M 12 Accessories: 1 chuck key 1 set of hardened boring jaws 1 set of hardened turning jaws Weight 103 kg Shipping dimensions: W 800 x D 600 x H 550 mm

Condition: new, Year of construction: 2018, pan capacity 420 kg Single-Chamber Meltec Furnace Typ Z20/120C unused as new for DAW20A or DAW20S with stainless steel crucible. Crucible content 420kg/Zn. Melting capacity 120kg/Zn/h Electrical Connection 21,5kW With control cabinet. Hnsdpfetv Rlzox Al Djr

Condition: used, Year of construction: 1994, closing pressure 600 kN clamping plate 460x460 mm distance between columns 300x300 mm weight of the machine ca. 4,5 t lock stroke 230 mm capacity of ejector 40 kN ejector stroke 70 mm height of form 120-350 mm column diameter 56 mm casting capacity 55 kN casting plunger stroke 130 m/m injection plunger diameter 45,50,55 mm casting volume (DIN 24480) 76,121,165 cm 2 volume cast pressure 345,280,231 kp/cm² casting area 174,214,260 cm 2 Traverse Stroke 150 m/m Used Die Casting machine DAW 50 without control and equipment. As a basic machine for general overhaul in the overhaul plant. It can be carried out in the scope of agreement. Hedpfx Aotuxmyel Denr

Condition: used, Year of construction: 1995, closing pressure 2200 kN clamping plate 755x755 mm distance between columns 500x500 mm weight of the machine ca. 8 t lock stroke 430 mm capacity of ejector 110 kN ejector stroke 100 mm height of form 250-600 mm column diameter 85 mm casting capacity 130 kN casting plunger stroke 175 mm injection plunger diameter 70,80,90 mm casting volume (DIN 24480) 450,636,856 cm ³ volume cast pressure 335,260,203 kp/cm² Hnsdsvxlufepfx Al Dor casting area 656,846,1078 cm 2 Traverse Stroke 230 mm Used Die Casting machine DAW 200 S with Datavario control for the use of zinc alloys. Available in accordance Recommendation from the manufacturer is general overhaul in the overhaul plant. It can be carried out in the scope of agreement.

Condition: used, Year of construction: 2007, used electric sprayer Spraymotion 411 E for die casting machines. The device has been tested by the manufacturer for function Included support unit and spray- and blowrail (system SR) Connection 24 pin plug Hnjdpfxetwfkne Al Djr electric driving unit with 400mm stroke length

Condition: repair required (used), Year of construction: 2001, functionality: not functional, FRECH DAK 720-71 RC Die-Casting Machine, used Machine number 440403, clamping force 8,000 kN, clamping stroke 825 mm, ejection force 364 kN, ejection stroke 180 mm, mould height 350 to 1,000 mm, clamping platens 1,300 x 1,300 mm, tie bar spacing 825 mm, tie bar diameter 180 mm, maximum casting force 713 kN, casting stroke 600 mm, casting piston diameter 70 to 120 mm, casting volume 1,539 to 4,523 cm³, operating pressure 160 bar, drive motor 45 kW, equipped with MELTEC AVDF 1200/5000 dosing furnace, year 2017, serial number System sold as a donor for spare parts Hedpfx Alewc Tdze Dsnr Technical details: Dimensions (L x W x H): approx. 8,000 x 7,500 x 3,500 mm Weight: approx. 36,000 kg Year of manufacture: 2001

Condition: used, Year of construction: 1992, closing pressure 600 kN clamping plate 460x460 mm distance between columns 300x300 mm weight of the machine ca. 4,5 t lock stroke 230 mm capacity of ejector 40 kN ejector stroke 70 mm height of form 120-350 mm column diameter 56 mm casting capacity 55 kN casting plunger stroke 130 m/m injection plunger diameter 45,50,55 mm casting volume (DIN 24480) 76,121,165 cm 2 volume cast pressure 345,280,231 kp/cm² casting area 174,214,260 cm 2 Traverse Stroke 150 m/m Used Die Casting machine DAW 50 with SBC 2 control for the use of zinc alloys. Available from used machine stock. The machine is equipped with an electric furnace from Rauch Typ MO50E and used pneumatic sprayer 401. Hsdpfx Aefrvzvol Donr Recommendation from the manufacturer is some repair in the overhaul plant. It can be carried out in the scope of agreement.

Condition: used, Year of construction: 2017, workpiece weight max. 2000 g Hnsdoy Diaujpfx Al Dsr used weightcontrol WC2000 for die casting machines up to a unit weight of 2000 grams. The device has been checked and repaired by the manufacturer

Condition: used, Year of construction: 2000, closing pressure 900 kN clamping plate 540x540 mm distance between columns 350x350 mm weight of the machine ca. 5,5 t lock stroke 280 mm capacity of ejector 60 kN ejector stroke 70 mm height of form 160-400 mm column diameter 65 mm casting capacity 75 kN casting plunger stroke 130 m/m injection plunger diameter 50,55,60 mm casting volume (DIN 24480) 119, 163, 214 cm 2 volume cast pressure 380, 315, 265 kp/cm² casting area 236, 285, 340 cm 2 Traverse Stroke 150 m/m General overhauled Die Casting machine DAW 80 GO with DataLogic control for the use of zinc alloys. Excerpt from the overhaul: · Upgrade of the machine with new control cabinet and operator panel including new electric machine installation · Renewal of the hydraulic system (blocks and valves) · locking unit overhaul Details available upon request The machine is equipped with the following options: Front door motorized, rear door manual handling Cover for drop through area at the subframe Hanging operating desk with monitor 1.0.2 Cover for drop through area at the subframe with scale / chute 3.2.4 Multi-chamber furnace with pump TOC Hjdpfx Aoyzt D Ejl Dsnr 3.2.1 furnace control cabinet 4.0.1 Hydraulic system for water glycol 6.1.3.1 Wired signal interface for extraction device (DISPO 010) 6.5.2 Equipment package, Remote Service Dialog (RSD) with switch 7.2.2.2 Spraymotion 611 E with servo drive 7.3.1 Lubricant container TD 20 7.4.0.3 Spray rail CR 275 Other options can be offered upon request

Year of construction: 1996, condition: used, functionality: unexamined, machine/vehicle number: Nr. 960104, Spool winding machine DAK Graupner No. 418 Graupner spool winding machine, winding shaft for EI 135/52 Wire 1: 0.3 to 2.0 mm diameter Wire 2: 1.0 to 4.0 mm diameter Hodoyuthcopfx Al Donr

Condition: new, Year of construction: 2025, closing pressure 240 kN clamping plate 380x380 mm distance between columns 250x250 mm weight of the machine ca. 3,0 t lock stroke 180 mm capacity of ejector 28 kN ejector stroke 50 mm height of form 120-300 mm column diameter 45 mm casting capacity 43 kN casting plunger stroke 85 m/m injection plunger diameter 36,40,45 mm casting volume (DIN 24480) 47,63,87 cm ³ volume cast pressure 420,340,270 da/cm² casting area 56,70,88 cm 2 Traverse Stroke 150 m/m Equipment of the machine 1.0.2 Cover for drop through area at the subframe with scale/chute 1.0.3 Cover for small parts in the subframe 1.1.0 Motorized guard in casting direction left 1.4.0 Machine positioning mounting pads 1.5.4 Machine interior illumination 1.11.0 Convenience package energy efficiency 2.0.1.2 Ejector function package "Technology" including SensiEject Hnedpfex Hp E Asx Al Djr 2.6.4 Machine assistance system SensiLock 2.8.0 Hydraulic adjustment of locking unit for shot positioning 3.0.1.2 Casting assistance package Technology including SensiInject 3.2.9 EcoMelTec multi-chamber furnace with pump (surcharge) 3.4.4 Prefilling process 3.4.5 Simplified piston removal 3.4.6 Piston stop during return stroke 3.5.2 Electric nozzle and gooseneck heating (extended version) 3.5.3 Plug-in connections for electric nozzle and gooseneck heating 4.5.0 Shut-off facility for hydraulic locking and injection unit 4.6.1.2 Integrated water circuit 2+4 circuits 5.1.0 Machine control DATADIALOG - Realtime Control (RC) 5.1.5 Maintenance plus package 5.6.0 Special cable lengths 6.1.3.1 Wired signal interface for extraction device (DISPO 010) 6.1.4 Serial interface for 4 heating-cooling circuits ROBAMAT 3.1 6.1.5 Interface for Vacuum unit 6.3.1.1 Hanging operating desk with monitor 6.5.2 Service Package RSD with Switch for each additional machine 7.2.1.2 Spraymotion 411 E with servo drive 7.2.10 Extended spraying program for spraymotion 7.3.1 Lubricant container TD 20 7.4.0.1 Spray rail CR 155

Condition: new, Year of construction: 2020, closing pressure 600 kN clamping plate 460x460 mm distance between columns 300x300 mm lock stroke 230 mm ejector stroke 70 mm capacity of ejector 40 kN height of form 120-350 mm Column diameter 56 mm casting capacity 54 kN Injection stroke 130 mm injection piston diameter 45, 50, 55 mm Casting volum 109. 150, 194 cm³ volume cast pressure 339. 274, 226 daN/cm² Casting area 176, 218, 264 cm² weight of the machine ca. 3,5 t Equipment of the machine 1.0.1 Cover for drop through area at the subframe 1.0.2 Cover for drop through area at the subframe with scale/chute 1.1.0 Motorized guard in casting direction left 1.4.0 Machine positioning mounting pads 1.5.4 Machine interior illumination 1.11.0 Convenience package energy efficiency 2.0.1 Ejector assistance packages 2.4.2 Securing of ejector platen 2.6.4 Machine assistance system SensiLock 2.8.0 Hydraulic adjustment of locking unit for shot positioning 3.1.1 Nitrogen pressure control for piston accumulator 3.2.4 Multi-Chamber furnace with pump 3.2.5 Isolated Cover for Crucible Multi-chamber-furnace 3.4.4 Prefilling process 3.4.5 Simplified piston removal 3.4.6 Piston stop during return stroke 3.5.2 Electric nozzle and gooseneck heating (extended version) Hnjdsiu Smbspfx Al Dor 4.5.0 Shut-off facility for hydraulic locking and injection unit 4.6.1.2 Integrated water circuit 2+4 circuits 5.1.0 Machine control DATADIALOG - Realtime Control (RC) 5.1.2 Convenience Package – Casting – 5.2.1 Ejector Pressure graphics in DATADIALOG control 5.4.1 Data logging Scope 5.4.2 Configurable In- and Outputs 5.6.0 Special cable lengths 6.1.3.1 Digital interface for Non-FRECH extractor (Dispo 10) 6.1.4 Serial interface for 4 heating-cooling circuits ROBAMAT 3.1 6.3.1.1 Hanging operating desk with monitor 6.5.2 Service Package RSD with Switch for each additional machine 7.2.2.2 Spraymotion 611 E with servo drive, 1-circuit 7.2.10 Extended spraying program for spraymotion 7.3.1 Lubricant container TD 20 7.4.0.2 Spray rail CR 245 7.12.3 Low noise chute

Condition: used, Year of construction: 1994, functionality: limited functionality, Used Oskar Frech DAW 125 with control cabinet and crucible Hsdpowywn Eefx Al Donr

Condition: new, Year of construction: 2026, operating hours: 818 h, machine/vehicle number: S-MD 315, saw blade diameter: 315 mm, feed length X-axis: 100 mm, feed length Y-axis: 100 mm, feed length Z-axis: 80 mm, sheet thickness aluminum (max.): 100 mm, total height: 100 mm, cutting range round steel at 45°: 80 mm, cutting height (max.): 315 mm, overall weight: 350 kg, input voltage: 380 V, year of last overhaul: 2026, cutting range square steel at 45°: 80 mm, cutting range square steel at 90°: 100 mm, cutting diameter: 315 mm, saw blade bore: 32 mm, power: 380 kW (516.66 HP), Equipment: CE marking, PNEUMATIC DOUBLE VISE PROFILE AND METAL CUTTING MACHINE Hnodpfx Aoy Aw Spjl Dsr

Condition: new, functionality: fully functional, overall weight: 650 kg, The Japa® 315+ with electric drive offers a wide range of functions and high capacity in a compact, mobile unit. We have increased the capacity – the maximum wood diameter is now 31 cm, and the length is 50 cm. Technical specifications: Log diameter: 310 mm Hnodpfxjxx Szhe Al Der Splitting force: 5.6 tons Splitting wedge: 4-way Log length: up to 50 cm Oil capacity: 30 l Motor output S1: 4 kW / 400V Weight: 600 kg Dimensions: 4060 x 1330 x 2580 mm Original photos & honest descriptions. Shipping available upon agreement. Fair prices. Price for basic version, demonstration model – optional equipment extra. ❓If you have any questions, please don't hesitate to contact us – we will respond quickly and courteously!

Condition: good (used), functionality: fully functional, machine/vehicle number: W1V9071331N136811, mileage: 40,171 km, power: 110 kW (149.56 HP), first registration: 03/2021, fuel type: diesel, empty load weight: 2,035 kg, maximum load weight: 1,465 kg, overall weight: 3,500 kg, wheelbase: 3,665 mm, next inspection (TÜV): 06/2027, fuel: diesel, color: white, gearing type: mechanical, emission class: euro6d-temp, number of seats: 2, total length: 6,046 mm, total width: 2,099 mm, total height: 2,293 mm, loading space length: 3,040 mm, loading space width: 2,050 mm, Equipment: ABS, Android Auto, Apple CarPlay, EBS, air conditioning, airbag, car registration, electronic stability program (ESP), full service history, navigation system, non-smoking vehicle, power assisted steering, tire pressure monitoring, truck registration, Special equipment: 9147 Paint color Arctic White MB 9147 A50 Front axle with increased load capacity AI1 Control code rear axle bevel gear 215 AR2 Axle ratio I = 3.923 C6L Multifunction steering wheel Hsdeztzikopfx Al Dsnr CB1 Suspension for comfort and cargo protection CL1 Steering wheel adjustable in inclination and height E1D Digital radio (DAB) E1E Navigation E1G Live Traffic capability E2N Control of Pro features in NTG6 E3M MBUX multimedia system with 7-inch touchscreen ED4 Fleece battery 12 V 92 Ah ES0 Jump start contact EW6 Pre-wiring for Remote Services Plus EX9 3 years of free map data updates EY5 Mercedes-Benz emergency call system EY6 Breakdown management F35 Rear window F61 Interior mirror F68 Exterior mirrors, heated and electrically adjustable FF5 Storage compartment above the windshield FHS Cab FJ4 Storage compartment under the cockpit GD8 6-speed manual transmission ECO Gear H21 Heat-insulating glass all around with band filter on the windshield HH9 Semi-automatic controlled climate control Tempmatic HI1 Climate zone 1 (cold/comfort) IC1 Model series C907/C910 Sprinter IE0 Model series C907 VS30 Rwd IF3 Chassis with cab IG4 Standard IG5 Basic IH6 Head unit ECE/ROW IK0 Complete vehicle IL1 Domestic market (Germany) IL5 Left-hand drive IR4 Wheelbase 3665 mm (BM-defining code) IT4 3.5-ton vehicle J10 Speedometer km/h J55 Seatbelt warning for co-driver's seat J58 Seatbelt warning for driver's seat J65 Outside temperature display JA8 Crosswind assist JG0 Shift point indicator JH3 Communication module (LTE) for digital services JI7 Start-up distance, maintenance interval 60,000 km K13 Main tank 71 liters KP7 Exhaust gas purification SCR generation 4 L Left-hand drive L13 Fog lights with cornering function L72 Electrical system for superstructure interior lighting L94 Omission of parking lights LA2 Headlight assist LB1 Side marker lights LE1 Adaptive brake light LX5 Europe M40 Generator 14V/200A MJ8 ECO start-stop function MT2 Emission class Euro 6D-TEMP N1 Gr.III/N2 MU3 Engine OM654 DE 20 LA 110 kW (150 hp) P02 Steel platform with aluminum side panels P47 Front mud flaps Q11 Longitudinal member reinforcement Q67 Towing eye rear RF5 Tire manufacturer Pirelli (50) RH2 Tires 235/65 R16 C RM1 M + S tires RS3 Steel wheels 6.5 J x 16 RX5 Wheel manufacturer Maxion Wheels S22 Armrest for driver's seat, ISO-fix (child seat attachment system) S25 Armrest for co-driver's seat, center armrest rear (FFO) SA5 Airbag driver SA6 Airbag co-driver SB1 Driver's seat comfort SB2 Co-driver's seat comfort SK2 Seat occupancy recognition driver's seat V3L All-weather floor mats VF7 Fabric Maturin black X30 Registration certificate part 2 X99 Manufacturer Mercedes-Benz AG XC9 COC documents XM1 Noise reduction measure XM4 Acoustic package XN0 Model year G0-II XO5 Digital operating manual XW9 Control code change to WLTP XZ0 Model generation 0, model year 2010 Z1N Approval N1 Z2E Country version EU-EFTA-UK Z3R Premium tire protection (3 years) Z4W Manufacturing location Ludwigsfelde Z75 Bodywork measures additionally

Condition: excellent (used), functionality: fully functional, mileage: 15,821 km, power: 110 kW (149.56 HP), first registration: 01/2023, fuel type: diesel, empty load weight: 2,800 kg, maximum load weight: 700 kg, overall weight: 3,500 kg, next inspection (TÜV): 03/2027, fuel: diesel, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 3, total length: 6,967 mm, total width: 2,020 mm, total height: 2,916 mm, loading space length: 4,140 mm, loading space width: 1,540 mm, loading space height: 1,800 mm, Year of construction: 2023, number of previous owners: 1, Equipment: ABS, AdBlue, Android Auto, Apple CarPlay, Bluetooth, EBS, USB port, additional headlights, air conditioning, airbag, central locking, cooling unit, cruise control, electric window regulation, electronic stability program (ESP), full service history, hill-start assist, immobilizer system, navigation system, onboard computer, power assisted steering, second-hand vehicle warranty, sliding door, soot filter, tire pressure monitoring, traction control, truck registration, Thermo King V-200 Max Drive/Standby Cooling Interior Features Parking Assistance (Front, Rear, Camera, Self-Steering Systems) Climate Control (Automatic Climate Control) Navigation System Power Steering Cruise Control Partition Wall Central Locking Exterior Features Right Sliding Door Additional Features Full Service History Safety & Environment ABS ESP Particulate Filter Comfort Automatic Climate Control Electric Windows Cruise Control Central Locking Steering Wheel Adjustment Electrically Heated Mirrors Heat-Insulating Glass Reversing Camera Hill Start Assist Tempmatic Air Conditioning Safety Airbag ESP (Electronic Stability Program) Alarm System Electronic Immobilizer Outside Temperature Display Daytime Running Lights Hodpfx Aloztwtfo Dsnr Emergency Call System Crosswind Assist Exterior Self-Steering Parking Assist Vehicle Height Type H2 Vehicle Length Type L3 Interior Cloth Interior Interior Color: Black Center Armrest 3 Seats Armrest(s) Media MBUX Navigation Radio Radio with MP3 Option Bluetooth Connectivity Touchscreen MBUX Multimedia System with 7-inch Touchscreen 3 Years of Free Map Updates Pre-installation for Live Traffic Information Transmission Manual Transmission, 6-Speed Technology ABS Traction Control Power Steering Voice Control Emission Standard Euro 6d Multifunction Steering Wheel Particulate Filter Green Environmental Badge Engine Start-Stop Function General Full Service History Warranty Non-Smoking Vehicle Miscellaneous Registered as Truck Junge Sterne Transporter (Mercedes-Benz Certified Used) New Inspection 270° Rear Doors Fresh Service Vehicle Dual Passenger Seat Stabilizers Heavy-Duty Shock Absorbers Partition Wall Financing Available Right Sliding Door 4x2 Wheel Formula Long Wheelbase CO2 Efficiency Class (weighted): G AdBlue Tank Crosswind Assist Additional Information Breakdown Management Overhead Storage above Windshield High Roof Rear Double Doors, Opening up to Side Wall Front Axle with Increased Load Capacity Approval N1 Panel Van

Condition: used, diameter 400 mm boring diameter / mm - / SMW STP-315 Pneumatic rotary chuck 315 mm Diameter: 315 mm Hodpfxsymf U Se Al Denr