Used Fzh Engineering Gmbh Vario Flex for sale (79,424)

Condition: used, Pipe cutting system with optical laser marking detection The FZH Vario Flex is a fully automated pipe cutting system. It is specifically designed for the precise and reliable cutting of stainless steel pipes (e.g., for fuel, brake, air conditioning, or hydraulic lines). The system features optical laser marking detection. The control panel allows the user to select whether the cut is triggered mechanically (e.g., at the back of a union nut) or fully automatically via the optical detection of a laser marking applied to the pipe. Thanks to the integrated rotating 3-jaw cutting head and a micro-spraying unit (minimum quantity lubrication), the process is extremely gentle on the tooling. The pipes remain almost completely dry and free from major contamination. The entire process, from loading to clamping, cutting, and unloading, is highly automated and carried out in a material-saving cycle. Fully integrated labeling & traceability system: The system is designed for modern quality standards (Industry 4.0 / Automotive). After the cutting process, the barcode label is automatically generated, assigned, and printed for complete part traceability (traceability & system logging are directly integrated). Thanks to two separate box output stations (rear-side airlocks with sliding doors), the system automatically switches to the second station when the first box is full. The removal of the finished KLT boxes takes place in parallel with the main processing time without stopping the machine. Advantages of the Vario cutting head series compared to conventional cutting methods Shortest setup times in non-cutting separation Material-saving and free from contamination Chip-free Easy to maintain No coolant or lubricant required Short processing times Cuts all common materials Can be combined with common pipe magazines or from a coil Special designs possible Technical data & capacities Maximum pipe length (feed): 1,000 mm Material specification: Optimized for stainless steel pipes (also with pre-assembled union nuts or crimps) Ndjdpfxszw Ukce Akmsc Sensors & positioning: Optical sensors for automatic detection of laser markings on the workpiece Feeding system: Automatic drum magazine / vertical disc feeder (for manual or automatic loading) Length adjustment: Manually adjustable to different pipe lengths by means of a mechanical handwheel Cutting method: Chip-removing sawing / Rotating cutting head with three-jaw clamping and cutting mechanism (up to 600 rpm) Coolant system: Integrated micro-spraying unit (MMS) for minimum quantity lubrication Control: Siemens SIMATIC HMI industrial PC with TFT monitor, keyboard, and mouse Setup operation: Mobile Siemens teach-in terminal for manual axis configuration and position storage Integrated labeling and barcode printing system Enclosure: Aluminum profile system with safety Makrolon panes Logistics / Output Integrated box unloading station 2 separate box output stations for rear-side removal via protected airlock systems with sliding doors Suitable for standardized KLT containers (600x400 mm and 400x300 mm) Manufacturer: FZH Engineering GmbH Type / Platform: Vario Flex Year of construction: 2017 Material: Stainless steel Cutting head: Vario flex Special features: Pipes with union nuts Diameter Ø 6-76 mm Output length L = 150-1,000 mm Separation based on laser marking Wall thicknesses: 1 to 1.3 mm Condition: The system is in good optical and mechanical condition.

Year of construction: 2025, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: R500, FiberFlow R500 Cooling Die for Sale The FiberFlow R500 Cooling Die is a specially developed solution for structuring alternative proteins in High Moisture Extrusion (HME). The cooling die is designed to produce fibrous protein structures through controlled cooling and optimized flow guidance, making it particularly suitable for applications such as plant-based meat and seafood alternatives, as well as structured convenience products. The FiberFlow R500 is designed for throughput rates of up to 500 kg/h at operating pressures of up to 70 bar. Its annular (ring-shaped) geometry ensures optimal flow distribution, resulting in uniform fiber formation and consistently high product quality. The system features a modular design and is sold as a complete unit consisting of four segments. Particular emphasis has been placed on hygienic design, enabling the system to meet the stringent requirements of the food industry. The construction allows for easy and efficient cleaning. Njdpfey Um Tgex Akmodc The FiberFlow R500 is designed for seamless integration into existing extrusion lines and can be incorporated into continuous production processes without difficulty.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: Hersteller: A·S·T·A Eismann GmbH Food Technology • Typ: DLP • Baujahr: 2017, Manufacturer: A·S·T·A Eismann GmbH Food Technology • Type: DLP • Year of manufacture: 2017 • Machine number: 903758 • Throughput: up to approx. 2,000 l/h • Siemens S7 with touchscreen • Heat recovery and product pump • Feed tank: 100 l • Double jacket: 30 l • Operating pressure tank/double jacket: max. 6/3 bar • Temperature tank/double jacket: max. 90/100 °C Ndedpo Adrqqsfx Akmec • Stainless steel design, CE marking HOMOGENIZER: • Manufacturer: Bertoli S.r.l. • Type: H3007 • Year of manufacture: 2001 • Serial number: 1784 • Capacity: up to approx. 1,200 l/h • 7.5 kW, 380 V, 50 Hz, 15.4 A • Maximum working pressure: 18 MPa or 180 bar

Condition: good (used), Year of construction: 2020, functionality: fully functional, total length: 9,000 mm, Adhesive application cell with ABB robot IRB 4600-60/2.05. Included in the adhesive application cell: Robot (weight 425 kg, payload 60 kg, year of manufacture 2020) 7th axis + steel structure (unlike in the images, the axis and steel structure have been extended to approximately 9 m) Adhesive application units Protective fences, etc. Not included: Roller shutter doors Njdpezz Agmjfx Akmsdc Fixturing device (available separately) Detailed drawings available upon request.

Year of construction: 2024, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: F50, For sale is a FiberFlow F50 cooling die (year of manufacture 2024) from DIL Engineering GmbH, a specially developed solution for structuring alternative proteins in high-moisture extrusion (HME). The FiberFlow F50 is designed specifically for research and development (R&D) applications, product development, and pilot trials. With a throughput of up to 50 kg/h, it is ideal for developing and optimizing formulations and processes in the field of alternative proteins, for example, for plant-based or hybrid meat and fish alternatives. By precisely cooling the extrudate, fibrous and meat-like product structures can be created. The system has a modular design and can be configured with one or two segments, depending on the requirements. In addition, one or two separate cooling circuits are available, which ensures precise temperature control and, consequently, consistently high product quality. The integration of inline measuring systems is possible and allows for continuous process monitoring and optimization. Ndedpfx Akjzr Hq Rjmoc Particular emphasis was placed on hygienic design, ensuring that the system meets the high requirements of the food industry. Due to the well-thought-out design, cleaning is simple and fast, which is a major advantage, especially in development operations. The FiberFlow F50 can be combined with a wide range of different extruder types and manufacturers. If required, a customer-specific adapter can be manufactured for the mechanical connection to the respective extruder (offered individually depending on the existing extruder). We would be happy to check the technical compatibility with your existing extrusion system in advance.

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, Linear Scale: Gentle and Precise Filling Technology Our linear scale is the ideal solution for simple and precise dosing and filling of products. It combines accuracy with a gentle handling process. Thanks to minimal drop heights, product damage is effectively prevented, ensuring the quality of your goods—even with delicate products. Flexible and Efficient Operating Principle The core of our technology is a straightforward yet highly effective operating principle: Products are conveyed via linear belts or vibrating troughs and precisely dosed into weighing containers. Features: - Easy operation and cleaning - Convenient control via color touchscreen - Memory for various weighing recipes - Precise weighing results thanks to three-stage weighing (coarse / medium / fine), individually programmable - Tool-free format change - Intuitive scale design enables fast conversion and easy cleaning Ndjdswymlyepfx Akmsc - Product-friendly – the reduced drop height protects fragile and sensitive products - Versatile – suitable for both food and non-food applications - Accurate dosing ensures consistent product quality - Robust and hygienic: parts made of stainless steel 304, easy to clean - Compact design and durable construction save space and reduce maintenance With our linear scale, you receive a reliable, precise, and hygienic solution that increases the efficiency of your production processes. Technical Data - Weighing range: 20 g to 2000 g - Accuracy: up to 0.5 g, depending on product - 4.5-liter weighing container - Max. speed: 30 weighings/min (2-head scale) - Material: stainless steel 304 - Connection: 220V / 50Hz / 6A Discover more weighing systems from Impuls Packaging: - Linear scales (1-head, 2-head, 4-head, incl. mixing systems for blending 2–4 products) - Multihead weighers with 10 to 32 heads and mixing systems for up to 8 products (control via the system or remote control through network connection, upgradeable to live camera monitoring) - Multipack systems with up to 36 heads and up to 8 simultaneous discharges - Systems for sticky, frozen, and meat products - Special scales for stick-shaped products (e.g. pretzel sticks) including product alignment - Weighing systems for large products like salads - Fine weighing systems for accuracies up to 0.1 grams - Auger fillers (1-stage or 2-stage weighing) and powder filling (accuracy of 0.3%–1%, including automatic recalibration in conjunction with a weighing system) - and much more.

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 14,022 h, machine/vehicle number: 2621150, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: VARIOBEND / ASCO, controller model: VARIOBEND Touch Control, working width: 6,400 mm, sheet thickness (max.): 1 mm, sheet thickness steel (max.): 1 mm, sheet thickness stainless steel (max.): 1 mm, sheet thickness aluminum (max.): 2 mm, back gauge adjustment: CNC-controlled, back gauge: 1,300 mm, overall weight: 8,800 kg, total length: 7,200 mm, total width: 2,150 mm, total height: 1,600 mm, input voltage: 400 V, input frequency: 50 Hz, type of input current: AC, year of last overhaul: 2025, Equipment: CE marking, angle stop, centralized greasing system, cone bending device, documentation/manual, emergency stop, foot remote control, We are offering for sale a VARIOBEND CNC sheet metal folding machine, manufactured by ASCO GmbH, Germany. The machine is currently owned by DIMING d.o.o., a company based in Slovenia, specializing in construction and sheet metal works. The machine is designed for precise and efficient sheet metal bending and is particularly suitable for roofing, façade construction and architectural sheet metal fabrication. Ndjdpfsz Sz Txex Akmec Its robust construction and CNC-controlled operation ensure accurate, consistent and repeatable bending results, making it suitable for professional sheet metal processing. We are upgrading our machinery and investing in a newer-generation folding machine. The machine is available for inspection in Slovenia by prior arrangement.

Condition: new, functionality: fully functional, Our state-of-the-art automatic tube filling machine is a versatile all-rounder, specifically designed to optimally support companies with the highest quality requirements. Thanks to its superior build quality and wide application range, it offers intuitive operation to efficiently and reliably optimise your tube filling processes. Powerful drives and a user-friendly colour touchscreen control system enable maximum flexibility for format and product changes, greatly simplifying your tube filling operations. The machine features memory slots for rapid and reproducible setting of all relevant machine parameters. If you are looking to optimise your tube filling processes with strong production performance while maintaining high quality, Impuls Packaging is your ideal partner. System Overview Parameters: Power supply: AC 220V / 50Hz or 110V / 60Hz Power: 4 kW Filling range Ndsdpeyq Hgkofx Akmec ● 2–5 ml ● 5–30 ml ● 10–140 ml ● 30–300 ml (customisable) Tube diameter: 10–50 mm (customisable) Tube length: 30–250 mm (customisable) Hopper volume: 50 L Filling accuracy: ±1 % Capacity: 40–60 tubes/minute Machine dimensions: 2050 × 900 × 1900 mm Net weight: 850 kg

Condition: new, Year of construction: 2022, functionality: fully functional, type of input current: three-phase, power: 50 kW (67.98 HP), input voltage: 400 V, fuel: domestic gas H, overall weight: 2,200 kg, nominal power: 50 kW (67.98 HP), input frequency: 50 Hz, continuous power: 50 kW (67.98 HP), input current: 72 A, Equipment: documentation/manual, For sale: new and unused 2G g box 50plus combined heat and power (CHP) unit from 2022. This is a 2G Energietechnik g box 50plus, configuration as70 4, suitable for simultaneous generation of electricity and heat using natural gas. The unit has never been put into operation and is in new condition. At full load, the CHP unit delivers 50 kW of electrical power and approximately 104 kW of thermal power. The unit is designed for 400 V and 50 Hz and is equipped with a Liebherr G924 natural gas engine and a Leroy Somer LSAH 44.3 generator. Technical specifications: • Manufacturer: 2G Energietechnik GmbH • Type: g box 50plus • Configuration: as70 4 • ID number: H1214 • Year of manufacture: 2022 • Electrical power: 50 kW • Thermal power: approximately 104 kW • Rated voltage: 400 V • Rated frequency: 50 Hz • Rated current: 72 A • Weight of CHP module: approximately 2,200 kg • Fuel: natural gas • Electrical efficiency: approximately 34.5 percent • Thermal efficiency: approximately 71.8 percent • NOx emissions: less than 125 mg per Nm³ • Sound pressure level of CHP: approximately 55 dB(A) at 1 meter The offered package consists not only of the CHP module. The installation also includes two Viessmann boiler bodies, one Viessmann Proflame VM IV 3 gas burner, a separate control cabinet, and various flue gas components, fittings, and related documentation. The original new price of the complete installation was approximately €189,000. The installation comes from a project for which it was ultimately not used. The various main components are from 2022 and have been stored without being put into operation. Due to the size and composition of the installation, we advise interested parties to contact us in advance for further technical information, photos, documentation, and an overview of the components available. An inspection is, of course, possible (location: Winterswijk, Netherlands). Nodpoz Hngmjfx Akmedc Loading onto the buyer's transport vehicle is possible on site.

Condition: good (used), Used agitator tank with insulation on castors Electric heating does not work! Item number: 10784 Last use: Pharmacy Volume: 300 liters Type: Upright on 4 castors Ndjdpfx Aorl Rtuekmjc Material (wetted parts): 1.4571 / AISI316 Version: with insulation Operating pressure according to type plate: +0.5 bar Max. Max. operating temperature: + 95 °C Tank dimensions: Manhole: 410mm Inner diameter: 700mm Outer diameter: 800mm Height of the feet: 870mm Total height: 1700mm Total width: 870mm Total length: 950mm Cylindrical height: 650mm Materials: Interior: 1.4571 / AISI316 External parts: 1.4301 / AISI304 Equipment: Type plate: Yes Outlet diameter: DN25 Distance drain to floor: 365mm Propeller agitator Empty weight: 184Kg

Condition: used, Year of construction: 2017, operating hours: 30,000 h, 1 Bending and welding system, BMW tension strut, manufacturer: STEPP Fabrikationsautomations GmbH & Co. KG, year of manufacture: 2017, power connection: 400V, 50Hz, 200A, nominal pressure: 6 bar, dimensions (L x W x H): 10m x 6m x 2.6m, weight: approx. 16t, pneumatic components are primarily used for clamping and alignment, hydraulic drive is mainly used for direct processing, such as hole punching, 3 robots, manufacturer: Yaskawa, type: 1x YR-MH00024-A00, 2x YR-MA1440/MH12-A00, for transfer and welding operations, servo drives are used for transfer, control system: Siemens 1516-3, machine hours: 30,000, average utilization: 85%, last documented maintenance: 02/16/2024, system generally operational, rework has been carried out. Ndjdpj Aaw U Tofx Akmjc

Condition: refurbished (used), Year of construction: 2021, operating hours: 45 h, machine/vehicle number: 202021, Multifunctional CAM cutting system in pure waterjet technology - without abrasives (waterjet cutting system / water cutting system). 2 cutting bridge with 2 cutting heads including Z-axis 1 head 2D cut 1 head 2D cut For cutting foam, plastic, technical textiles and other flat, flexible, non-metallic materials Maximum feed-through height: 140 mm Cutting area in X and Y: 28500 mm * 2750 mm Protection class: IP54 incl. used high-pressure pump BFT Ecotron 40.22 (650 operating hours) (Product photo as an example) Ndodjwrn Iyjpfx Akmoc The machine is CE-certified.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, Place: Austria Available immediately Ndsdpfx Akexy Iikomec

Condition: used, Year of construction: 2019, operating hours: 25,600 h, 1 Skoda production line, manufacturer: STEPP GmbH & Co. KG, year of construction: 2019, mains connection: 400V, 50 Hz, nominal pressure: 6 bar, dimensions (L x W x H): 12m x 8m x 2.6m, weight: 16 t, enclosed robot cells, the system is used for the production of hood hinges for Skoda vehicles, raw material is transferred and riveted between different stations, 4 robots, manufacturer: Yaskawa, type: 2x YR-HP20R-B2C, 1x YR-HP20-B00, 1x YR-1-06VX7-A00, machine hours: 25,600, average utilization: 85%, last documented maintenance: 02/12/2025, the system is generally operational, rework has been carried out. Ndodpfe Aaxgdex Akmec

Condition: excellent (used), operating hours: 12,705 h, axle configuration: 4x4, power: 265 kW (360.30 HP), fuel type: diesel, first registration: 06/2008, color: other, tire condition: 80 %, number of seats: 2, gearing type: automatic, Equipment: air conditioning, = Additional options and accessories = - 1 fuel tank - ABS - Armrest - Day Cabin - Hub Reduction - Hydraulics - PTO - Radio - Sper - Thick Axles Nedoz Rzhyjpfx Akmodc = More information = General information Year of construction: 2008 Cab: day Technical information Engine capacity: 7.145 cc Drivetrain Drive: Wheel Axle configuration Brakes: drum brakes Front axle: Differential lock; Steering; Tyre profile: 80%; Reduction: hub reduction Rear axle: Double wheels; Differential lock; Tyre profile: 70%; Reduction: hub reduction Weights Empty weight: 10.000 kg Carrying capacity: 3.350 kg GVW: 13.350 kg Max. towing weight: 40.000 kg Functional Quick coupler system: Yes Condition Technical condition: very good Visual appearance: very good Financial information Ask about the lease options

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Place: Austria Nodpfjxy Rddsx Akmsdc Available immediately

Condition: good (used), Used pressure vessel with insulation on castors Item number: 10779 Last use: Pharmacy Volume: 300 liters Type: Upright on 4 castors Material (wetted parts): 1.4571 / AISI316 Version: with insulation Operating pressure according to type plate: 0.5 bar Operating pressure sheath: 1.5 bar Max. Max. operating temperature: + 95 °C Tank dimensions: Manhole: 400mm Outer diameter: 830mm Height of rollers: 880mm Total height: 1720mm Nedpjrl Rrtjfx Akmodc Total width: 1090mm Total length: 1090mm Materials Interior: 1.4571 / AISI316 Outer parts: 1.4301 / AISI304 Equipment: Type plate: Yes Spout diameter: 25mm Distance drain to floor: 390mm Empty weight: 184Kg Rolling frame prepared for agitator

Condition: used, 4-roller feed Nedpfjzt S D Eox Akmjdc Storage location:

Condition: good (used), Year of construction: 2004, Deep hole drilling machine TBT Varioflex MD 30-1, serial number 106254-11, manufactured in 2004, 70 kW, SIEMENS SINUMERIK 840D control system, tool changer, chip conveyor, paper band filter system, with extensive drilling toolset, drilling slide stroke 2,200 mm, drilling depth 1,500 mm, weight approximately 15,000 kg. Nedpfxoz Iccfj Akmedc

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, load capacity: 10 kg, arm reach: 1,418 mm, controller manufacturer: FANUC, controller model: R-30iB Plus, input voltage: 230 V, type of input current: AC, repeat accuracy: 0.05 mm, warranty duration: 6 months, Equipment: documentation/manual, Mobile automation cell GEWA "RoboFlex 10", consisting of: - FANUC CRX10iA - R-30iB Plus Controller - Tablet Teach Pendant - BASIC base frame incl. 5 grid positions - without gripper (optionally available) Ndjdpexrknmjfx Akmsc The cell is located with us in the Eifel region and can be inspected under power by appointment. OPTIONAL: Connection of RoboFlex to your machine tool - Configuration of automation interface - Installation and commissioning - Operator training (2h) - Test run and handover to customer We are happy to provide you with an individual offer upon request.

Condition: used, Year of construction: 2019, machine/vehicle number: S4-3044, input voltage: 230 V, type of input current: AC, laser power: 120 W, type of cooling: air, total width: 1,428 mm, total height: 1,050 mm, total length: 952 mm, overall weight: 300 kg, laser wavelength: 10,600 nm, input frequency: 50 Hz, For sale is a used, professional Trotec Speedy 400 CO₂ laser engraving and cutting machine, manufactured in May 2019. The machine is in used condition, commensurate with its age and previous use. Technical data: Manufacturer: Trotec Laser GmbH, Austria Model: Speedy 400 Year of manufacture: May 2019 Serial number: S4-3044 Ndodpfxo Adrb Ne Akmjc Laser type: CO₂ laser Maximum laser power according to the nameplate: 120 W Working area, typical for the model: approx. 1,016 × 610 mm Power connection: 230 V / 50–60 Hz Rated power consumption: 1.9 kW Known operating condition: The machine could be switched on and operated via the integrated control panel. The following functions could be checked: The X and Y axes of the laser head can be moved via the control panel. The height-adjustable work table can be moved via the control panel. The axes and the table could be moved to various positions. The red pilot/positioning laser is visible. The operating and control indicators are active. Important note regarding the laser: The actual condition of the CO₂ laser source is unknown. The operating hours and the remaining available laser power are unknown. A complete engraving or cutting test has not been performed. Scope of supply: The offer includes the Trotec Speedy 400 shown in the pictures, with the existing work table, laser head, and control panel. A separate extraction system, a control PC, and software licenses are not included in the offer.

Condition: like new (used), Year of construction: 2020, As-new drying centrifuge For drying bulk parts For stain-free drying of workpieces after vibratory finishing Continuously variable speed control from 700 to 1100 rpm Adjustable hot air temperature Max. batch weight 5 kg Basket: Ø270 mm x 190 mm Nodpfj Adpugjx Akmedc Timer: 1–60 minutes Heating power: 2.1 kW Voltage: 230 V Dimensions: 70 × 50 × 95 cm (L × W × H)

Year of construction: 2020, condition: like new (used), As-new drying centrifuge For drying bulk parts For stain-free drying of workpieces after vibratory finishing Continuously variable speed control from 700 to 1100 rpm Adjustable hot air temperature Max. batch weight 5 kg Basket: Ø270 mm x 190 mm Timer: 1–60 minutes Heating power: 2.1 kW Voltage: 230 V Nsdpfj Adpt Nex Akmedc Dimensions: 70 × 50 × 95 cm (L × W × H)

Condition: excellent (used), Year of construction: 2013, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 24480, input voltage: 400 V, The Amandus Kahl flat die pellet press, type 37-850, is a robust industrial machine manufactured by the German machine builder Amandus Kahl for the compaction of various materials. Ndodpoz I Tktsfx Akmoc Key technical data (type 37-850) • Die diameter: 850 mm • Roller diameter / width: 350 mm / up to 130 mm • Number of roller rolls: 4 pieces • Roller speed: approx. 2.5 m/s • Drive motor power: 132 (at 1500 min⁻¹)

Condition: excellent (used), Year of construction: 2022, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: SN210551, overall weight: 14,000 kg, type of input current: AC, input voltage: 400 V, power: 400 kW (543.85 HP), Equipment: type plate available, A MIXACO heating/cooling mixer is a combined system consisting of a heating mixer and a downstream cooling mixer, specifically designed for the processing of powders, granules, and compounds (e.g., PVC dry blends, WPC, or masterbatches). Technical specifications – summary (details can be found in the documents): Hot mixer: • Volume: 3500 liters – Usable volume: 2500 liters • Tip speed: 5-50 m/s • Made of duplex steel – 1.4462 stainless steel • Power drive with 400 kW FC controlled Nsdpjz Iww Rofx Akmjdc • Vacuum up to 150 mbar abs. Cold mixer: • Volume: 9000 liters – Usable volume: 7650 liters • Tip speed: 3.5 – 7 m/s • Made of 1.4541 stainless steel • Power drive with 90 kW FC controlled The operating principle is divided into two physically and apparatus-wise separate process phases: 1. The heating mixer phase (heating and homogenizing) • Mechanical friction: In the heating mixer, a modular mixing tool rotates at a high circumferential speed (approx. 10–40 m/s). The intense flow and vortex formation (mixing vortex) causes the particles of the mixture to rub intensely against each other. • Heating: This mechanical friction generates the necessary thermal energy directly in the product, quickly and evenly heating the material to the desired target temperature (sometimes exceeding 100 °C). • Recipe component addition: At the same time, all recipe components, such as additives, dyes, or liquids, are perfectly homogeneously distributed. An integrated aspiration system also ensures the dehumidification of the mixture. 2. The transfer • Once the target temperature defined in the process program is reached, a contoured, dead-space-free outlet opens on the heating mixer. • The hot, homogeneous mixture is transferred with minimal residue and quickly to the cooling mixer, which is located directly below or next to it. The heating mixer is then immediately available for the next batch. 3. The cooling mixer phase (gentle cooling) • Heat exchange: In the cooling mixer (available in vertical or horizontal design), the hot material is passed over cooled surfaces. • Water cooling: A targeted cooling water circuit in the double jacket (bottom and side walls) efficiently removes thermal energy from the dry blend. • Agglomeration prevention: A slow, material-friendly stirring mechanism keeps the mixture in motion until the final storage temperature is reached. This prevents caking (compaction) due to residual heat before the material is transferred to silos or further processing. Summary created with AI. The units can be inspected in operation in the Netherlands. The system for sale was used in the R&D center of UBQ for development purposes. This explains the very good condition for the low number of production hours. We also have a steel structure available for the setup. This is not included in the price. If there is interest, it can be negotiated separately. Currently, the system is located outside of Europe – we need to determine whether direct transport is feasible or whether import to Europe by UBQ is more sensible (which would allow for a sale within Europe with a reverse-charge mechanism).