Used Galan Ring-Spinning Machine for sale (65,893)

Year of construction: 2003, condition: used, Number of spindles: 5, ring diameter: 200mm, bobbin length: 550mm, compressed air connection: 6-8bar, compressed air consumption: 0.5l/s, voltage: 380V, frequency: 50Hz, connected load: 6kW, CE marking present, an on-site inspection is possible. Hedpfxsz Dkife Alwsu

Year of construction: 1998, condition: used, Ring diameter: 200mm, bobbin length: 550mm, connected load: 13kW, mains connection: 380V, three-phase connection: N + PE, an on-site inspection is possible. Hjdpfx Aoz Dkirslwju

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, center width: 1,400 mm, center height: 400 mm, spindle motor power: 3,000 W, total length: 2,400 mm, spindle speed (min.): 100 rpm, spindle speed (max.): 1,200 rpm, Manual spinning machine make Leifeld Type Plb 300 License plate - Powerful, solid machine - Very good technical machine condition - All functions checked - Electrical controls and operating buttons new - Motor and belt drive new - New paint finish - green Technical data Center height mm 400 Center width mm 1400 Machine bed with offset + bridge mm 200 deep / 350 wide Machine length mm 2400 Spindle motor kW 3 4-speed gearbox Speeds - infinitely variable approx. 1/min 100 - 1200 Spindle holder M 64 Manual steel support - length mm 450 Tailstock - stroke mm 280 Quill - fine adjustment Morse taper MK 3 Machine weight approx. kg 1200 Hjdpfovcfhmox Alwju Special equipment built into the machine - Center height mm 400 - Center width mm 1400 - M-bed with crank + bridge mm 200 deep / 350 wide - Morse taper MK 3 - Stepless spindle speeds in the indexing steps due to frequency-controlled drive motor - Multi-plate clutch and brake - Hollow bored main spindle - Electrical switching Additional equipment - on request - Manual cross support PS 30 / 300 - Cut-off device

Condition: ready for operation (used), Year of construction: 1970, functionality: fully functional, center width: 600 mm, center height: 300 mm, spindle motor power: 3,000 W, spindle speed (min.): 200 rpm, spindle speed (max.): 2,000 rpm, quill stroke: 300 mm, overall weight: 800 kg, input voltage: 400 V, type of input current: three-phase, Hand spinning machine, make Schulte Technical data: Centre height: 300 mm Centre distance: 600 mm Machine length: 1500 mm Hodpfx Aexp Sc Holwou Spindle motor: 3 kW Speeds: 200 – 2000 rpm (stepless adjustment) Spindle mount: M 36 Manual tool rest Tailstock stroke: 300 mm (quill travel via handwheel) Machine weight approx.: 800 kg Machine description: - Powerful, robust spinning machine - Overhauled and ready for operation - Main spindle newly bearing-mounted - New three-phase motor and belt drive - Main spindle with stepless speed control - New electrical control - Newly painted

Condition: new, Year of construction: 2025, number of rollers: 3, shaft diameter: 30 mm, - Shaft diameter: 30 mm - Rotates both clockwise and counterclockwise - Usable horizontally and vertically Hedexgb A Djpfx Alwju - Foot operation - Emergency stop - Documentation - 400 V

Condition: new, number of rollers: 3, shaft diameter: 50 mm, - Shaft diameter 50 mm - Top roller is moved hydraulically - Digital display - Can be used horizontally/vertically - Foot control - Emergency stop - Documentation - 400 V Hsdpfx Aljr Ar Hvewju

Year of construction: 1989, condition: used, functionality: fully functional, Model: Gemini ESCO D6-SR with unwinding reel Year of manufacture: 1989 Max. material diameter: 6.35 mm Max. machining length per stroke: 62 mm Number of rotating tools: 3 (or turret version with 4 positions) Max. tool head speed: up to approx. 7,100 rpm Machine dimensions (machine only): Machine bed, partially, approx. 1,000 × 3,400 mm Operating voltage: 380V 50 Hz Control voltage: 110 V 50Hz Rated power: 3.4 kW Rated current: 6 A Hsdpfsyip E Tex Alwju

Year of construction: 1989, condition: not inspected (used), machine/vehicle number: 117-0690-7892 Messemodell, Brief Description: - 2x12 spinning positions - SE9 boxes - Corolab - 1 start-up trolley - SRZ (precision winding) Hjdpfxjw Rldze Alweu - Machine documentation available Last Use (Jan. 2024): - Application-specific product testing of polyester fibers - 0.9 - 1.7 dtex, 32-38 mm cut length - Approx. 45kg/sample to assess running behavior under constant machine settings - Mainly in Nm34, Nm50 - Untested, only for spare parts use! The machine has been dismantled and stored, but can be inspected on site. Pick-up only by buyer in 14727 Premnitz, no shipping. If interested, we look forward to your offer. Written inquiries only, please.

Condition: good (used), Year of construction: 1985, Offer 26046 Technical data: - 2 motor-driven rollers - Manual adjustment of the top roller - Shaft diameter: 30 mm - Shaft rotation: 6 rpm - Roller diameter: 88 – 108 mm - Bending capacity approx.: – flat steel 50 x 8 mm – square profile 20 mm – round pipe 42 mm - Drive: 380 V / 0.55 kW - with: – right / left operation Hsdpfx Aoyh I Afelwou - Tube roller set approx. 16 mm - Weight approx. 150 kg - Space requirement approx. W 650 x H 1300 x D 950 mm

Condition: good (used), Year of construction: 1970, center width: 2,350 mm, center height: 2,400 mm, Max. blank / workpiece over bed:2400 Centre height over bed: 1200mm Distance between centers: 2350mm Length of the gap: 400mm Maximum sheet thickness: 6mm Stroke X-Axis: 1200mm Stroke Y-Axis: 300mm Speedrange: 6 - 675Rpm Power: 40kW Stroke pinole quill: 1200mm Hodextaxwjpfx Alwou Length: 4500mm Width: 3200mm Height: 2500mm Weight: 10200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Storage location: 3128 Manufacturer: BPR (Zopf) Machine number: Type: RS 302 Shaft diameter: 30 mm Hodpozl Dugjfx Alwsu Bending capacity, flat steel: 50 x 10 mm Square: 30 mm Round tube: 60 x 1.5 mm Driven shafts: 2 Stroke, upper shaft: 95 mm Axle distance: 275 mm Rotational speed: 6 rpm Roller diameter: 132 mm Accessories: Upper roller, manually adjustable Roller sets: 1"; 1 ½"; 1 ¼"; one additional set, no. 51 one set of knurling rollers Condition: good Connection: 0.75 kW Weight: approx. 0.2 t Dimensions with base frame: 650 x 500 x 1,300 mm

Condition: excellent (used), functionality: fully functional, Swivel spindle milling machine KÖLLE F 45 in very good condition; this machine comes from an assembly company and has been idle for the last few years, as it was no longer needed. Everything functions perfectly. All bearings and guides are in good condition; the machine runs very smoothly. Hsdpfxjzt Ai Eo Alwsu Year of manufacture: 1990 with control panel on top Both fence jaws on the milling fence can be adjusted in depth, with fine adjustment and scale, allowing for planing work, e.g., on a gluing profile. The entire milling fence can also be adjusted in depth using a handwheel and a leadscrew, enabling very precise and fast adjustments. with AIGNER integral fence with spindle locking lever Chips can be removed very effectively with 2 extraction ports, 125 mm on the milling fence and 100 mm on the machine table. with 30 mm spindle, which can be swiveled steplessly from -5 to 45°; the spindle is swiveled electrically with a very precise display; fine adjustment can be made manually with a handwheel. The height adjustment is also electric, and a handwheel is also available for fine adjustment. with right/left rotation We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; shipping to Austria and the rest of the EU is also possible upon request. with a large table opening of 375 mm, which can be reduced by using various rings (this allows for the use of cutters with a very large diameter, and you can also safely mill with small cutters). with 3000, 4000, 5000, 6000, 8000 and 10000 rpm the table is made of heavily ribbed cast iron with 30 mm spindle in the machine; another spindle can also be installed very robust and durable design; the machine was built for heavy-duty milling operations and is suitable for all milling applications. optimal power transmission through belt drive with instruction manual with 3-roller feed system HOL HER, type ET 117 the feed system has right/left rotation and 8 speeds; the feed rollers are individually mounted and are all in new condition. the machine table is 1000 mm deep and 1200 mm wide; it has an extendable support table 1200 mm long. the machine is ready for immediate use. 380 V, 4700 and 5700 W due to the 2 speeds with all necessary safety devices, motor brake, and emergency stop switch; the machine is approved by the German Wood Trade Association (Holz-BG) and has the GS safety mark. the machine weighs approximately 1000 kg with motor protection switch against overload professional-grade machine, not a hardware store reject optimal, simple, fast, and safe operation

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, operating hours: 150 h, excellent condition BIRLIK PBM 35 profile bending machine, pipe bending machine for sale manufacturer BIRLIK Makina type: PBM 35 year of manufacture: 2007 Shaft diameters: 50mm Roll diameters: 155mm Upper roller diameter: 148mm Working speed: 4.5m/min Motor power: 1.5kw Voltage: 3phase 380v 50Hz 3.8A Machine width: 700mm Machine length: 900mm Machine height: 1400mm Machine weight: 375kg Bending capacity: I-steel - flat 120 x 15 (d 750) mm I-steel - on the edge 60 x 10 (d 800) mm Angle steel 50 x 5 (d 1200) mm Round material 35.0 (d 800) mm Max. pipe diameter 70 x 2 (d 1200) mm Square material 50 x 40 x 3 mm Hedexc N Rhjpfx Alwju

Condition: like new (used), Year of construction: 1998, Technical Data: 2 hydraulically adjustable rollers 3 driven rollers Display with digital readout Bending moment: 110 cm/3 Shaft diameter: 180 mm Roller diameter: 460 mm Main motor power: 15 kW Dimensions (L x W x H): approx. 2400 x 2000 x 1600 mm Weight: approx. 7.8 t Accessories: Various tools Condition: Hodsy Rxuzepfx Alwou Very good, almost as new The seller assumes no liability for typing or data transmission errors. The machine complies with its age in terms of appearance, technology, and wear; used machines are sold without any warranty.

Condition: excellent (used), Technical data: 2 rollers, hydraulically adjustable 2 support rollers 3 driven rollers NC control Shaft diameter: 80 mm Shaft length: 160 mm Roller diameter: 224 mm Motor power: 5.5 kW Mobile control panel Dimensions (length x width x height): approx. 1240 x 1460 x 960 mm Weight: approx. 1.4 tons Condition: very good condition, little use The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty. Hodpfozv Ernsx Alweu

Condition: new, Year of construction: 2024, shaft diameter: 80 mm, Profile bending machine AHB 100 - with universal rollers - Three roller drive - Digital display left and right bending axis - Hydraulic lateral rectifier - Hydraulic drive of the bending rollers - Vertical and horizontal operation - built according to CE standards - Bending capacity flat bars max. 12 x 20 mm - Flat bent 200 x 40 mm - U profile inside and outside 180 mm Hjdpfsvaw Eljx Alwou - Angle profile web outside 100x100 mm - Angle profile web inside 90x90 mm - Solid material round 75 mm - INP 140 - Shaft diameter 100 mm - Roller diameter 315 mm - Bending speed 5 m/min. - Motor power 11 KW - Weight 2600 kg - module max Wcm3 -400 Volt 50 Hz. 3 ph. -1950x1600x2100 mm

Condition: good (used), Year of construction: 2008, 1 used profile ring rolling machine Make: Profiroll Bad Düben Hsdpfoyurx Tsx Alwju Model: URWA 250 Year of manufacture: 2008 Technical data: Control: SINUMERIK 840 D Rolling force: 800 kN Max. workpiece diameter: 250 mm Workpiece width: 80 mm Spindle diameter: 110 mm Spindle speed: 100–700 rpm Drive power: 110 kW Mandrel diameter: 45–100 mm Length: 2,600 mm Width: 2,600 mm Height: 2,600 mm Weight: 12.5 t Scope of delivery: Centralized lubrication Infinitely variable speeds Proportional measuring system Linear mandrel guide Mandrel run-out monitoring Process data management Rolling equipment: Feeder: 130–190 mm / W 46–80 mm Magazine: 130–190 mm Measuring head Separate cooling unit Electronic setup assistance Process visualization Ring stopper and turning device for rotating the rolled part

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, number of rollers: 3, shaft diameter: 35 mm, rotational speed (max.): 30 rpm, overall weight: 490 kg, power: 1.5 kW (2.04 HP), input voltage: 400 V, input frequency: 50 Hz, warranty duration: 12 months, Equipment: CE marking, documentation/manual, BPR BA 35 CNC Three-roll ring bending machine, hydraulic Technical data: Shaft diameter: 35 mm Roll diameter: on request Shafts made of durable steel, hardened and ground Drive motor: 1.1 kW, 50 Hz Hydraulic pump motor: 3 kW Shaft speed (variable): 0–30 rpm Working position: horizontal and vertical Separate control panel External dimensions: 740 x 1020 x 1110 mm Control panel dimensions: 600 x 710 x 1120 mm Weight: 490 kg Hydraulic adjustment of the side roll Three powered rollers with smooth surface Electronic control BPR Probending CNC Hydraulic cylinder pressing force: 5500 kg Working pressure: 190 bar Accessories included: Rollers for 1" pipe Hjdpfxewwt Hfe Alwou Straightening rollers Operator's key Operating manual

Condition: like new (used), operating hours: 20 h, functionality: fully functional, TECHNICAL DATA Number of spindles: 21 Distance between first and last drill bit: 640 mm Distance between centers of individual spindles: 32 mm Maximum workpiece size: 50 x 915 x 3000 mm Maximum drilling depth: 65 mm Number of pneumatic hold-downs: 2 Working table height of the drilling machine: 860 mm Maximum hold-down height above table: 70 mm Operating pressure: 6–7 bar Air consumption: 10 l/cycle Motor power: 1.5 kW Noise level: 76.1 dB Speed: 2800 rpm Dimensions L/W/H: 1030/1030/1285 mm Weight: 275 kg PRODUCT FEATURES Main features of the machine: - Single-head drilling machine for drilling operations from 0 to 90° - Pneumatically adjustable drilling head angle - Cast-iron stops - Spindles suitable for quick couplings - Patented pneumatic workpiece clamps - Cast-iron worktable - Fast and precise adjustment - Accurate drilling - Made in Italy Hsdpfx Aloy At Ndowsu Standard equipment of the machine: - 2 aluminium measuring scales, each 1.5 m (right and left) with two stops - 5 quick couplings - Wooden transport box for machine protection during transport ADVANTAGES - Drilling vertically/horizontally/at an angle - Multi-spindle drilling machine - New machine - CE certificate - Robust - Professional Net price €2,950.- Machine shipping not included Packaging included Net prices apply to international transactions and EU customers with a valid EU VAT ID No.

Condition: used, Vitap Multi-Spindle Drilling Machine, 27 spindles, left/right spindles, quick-release mounting, spindle spacing 32 mm, drilling in vertical or horizontal position, 4 pneumatic clamps, power supply 380V, 1.85 kW motor, Hedpfoz Hc Niex Alwju Machine ready for operation.

Condition: new, Year of construction: 2026, shaft diameter: 80 mm, Profile bending machine AHB 80 - Electro-hydraulic ring/profile bending machine - Hydraulic adjustment of lower rollers - Lower rollers can be adjusted individually - Three driven rollers - Segmented rollers - Digital display - Touchscreen - Hardened rollers and standard rolls - Hydraulically adjustable side straightener Hjdpfx Aeqxcy Hslwou - Can be used horizontally and vertically - Mobile control panel - CE marking / Declaration of Conformity Roller diameter 80 mm, hardened Fully hydraulic Motor 400 Volt 50 Hz 3-phase Weight approx. 1,700 kg Dimensions 1340 x 1390 x 1640 mm

Condition: new, Year of construction: 2025, Bending machine ZB 70/2 M - with foot pedal - with standard roller set - two driven shafts - mecanical adjusting of the center roller - working position horizontal and vertical - shafts are supported by conical bearings - slide bars on the slide -support are exchangeable - shaft diameter: 40 mm - roller diameter: - shaft rpm: 8,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,1 kW Hjdpfx Aljt Hwfnjweu - adjusting way: 120 mm - weight: 400 kg - dimensions: 900x600x1100 mm

Condition: new, Ostas Profile Ring Bending Machine OPK 65 Technical Specifications: • Tool holder, shaft: 60mm • Tool: 175mm Hjdsfig Aiopfx Alwsu • Working speed: 5m/min • Motor: 3kW • Dimensions L-W-H: 900x1250x1200mm • Weight: 1080kg • 3 driven rollers • Hardened standard rollers • Hardened and ground tool holder, shaft • Mobile control panel • Horizontal and vertical working position • Side angle guide rollers • Digital displays (2 pcs.) • Brake motor • Complies with CE standards

Condition: like new (used), functionality: fully functional, Year of construction: 2016, operating hours: 10 h, Includes: Special iron turning tool ATRC 18 Hsdpfx Ast Akxaelwou Special scroll bending tool ATAR 305 Spiral bending device ATSC Demonstration machine, no 10h worked! TECHNICAL DATA Shaft diameter mm. 30 Roller diameter mm. 128 Roller revolutions per minute rpm. 8.5 - 17 Drive motor Kw. 0.75 Main switch with release coil and built-in emergency (CP30 - CP30 R) - Reversing gear and double speed switch are mounted on a separate console (CP30 - CP30 R) - Foot switch Foot switch rotation control L/R with built-in emergency - (CP 30 PR) - Two-speed selector (CP 30 PR) - Mechanical regulation of the upper roller Mechanical regulation of the upper roller with position reading on display - Two traction rollers with ribbed surface Internal machine body made of steel - Steel shafts steel shafts, hardened and ground - Gear wheels made of special special steel with ground teeth - Rollers made of special steel with a hardness of 59/60 HRC - Outer cover in ABS - Working position horizontal (CP 30) Horizontal working position (CP 30) - Horizontal and vertical working position vertical (CP 30 R - CP 30 PR) Weight: CP 30 PR 240 kg. External dimensions mm: CP30 PR Base 680 x 800 - Height 825 ACCESSORIES Straightening rollers with two positions - Universal rollers ( standard ) - Operating key Operating key - Operating instructions

Condition: new, Ring-profile bending machine, Osta OPK 42 Includes standard roll set, steel Motorized ring bending machine Can be used horizontally and vertically, with 2 driven rollers Lower rollers are motor-driven Hsdpfjgw Hmqox Alwou Rollers are hardened Manual feed via the upper roller Left/right rotation via foot pedal Shaft diameter 50 mm Roller diameter (top) 158 mm Roller diameter (bottom) 158 mm Speed 4.4 m/min Motor power 0.75 kW Electrical connection 400 V Complies with CE standards Weight 380 kg Complies with CE standards