Used Gansow 150B Defect for sale (1,158)

Year of construction: 1999, operating hours: 709 h, condition: used, fuel type: electric, battery voltage: 48 V, machine/vehicle number: IC1461, 198275 Serial Number: 150B0000481299 Lhodozt Ez Depfx Ahtjk Battery Details: 48v Brush dont work, no charger

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, fuel type: electric, fuel: electricity, Equipment: second-hand vehicle warranty, IPC GANSOW 1250E SWEEPERS NEW 6V 175Ah GEL BATTERIES (SIAP) (4x) NEW NEOS 24V 20A RECTIFIER NEW, MAIN AIR FILTER 2014 production year New cylindrical brush combined with new side brushes provide excellent sweeping effect Ledpfx Aevunxfshtehk Highly efficient dust extraction turbine and new protective rubbers around the main brush prevent fine dust and dirt from rising after sweeping. The machine has a large waste flap for collecting larger waste. The device after a general, detailed renovation, operating fluids and parts such as bearings, drive belts, protective rubbers and filters have been replaced with new ones. Each device we offer has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Model: IPC GANSOW 1250 E Sweeping width (mm): 700 Sweeping width with two side brushes (mm): 1200 Efficiency with two side brushes (m²/h): 7800 Sweeping speed (km/h): 6 Tank capacity (l): 85 Filter surface (m²): 3.3 Dimensions L x W x H (mm) 1615 mm x 905 mm x 1210 mm Weight of the machine ready to work (kg) ~ 350 INCLUDED: NEW GEL BATTERIES 6V 175Ah (SIAP) (4x) NEW BATTERIES NEOS 24V 20A NEW, MAIN AIR FILTER New roller brush New side brushes New roller rubber guards 85l waste containers KEY FEATURES: Ergonomically designed cockpit and centrally located operator's seat provide good visibility of the cleaned surface IPC GANSOW 1250 E sweeper is a perfect machine for efficient, economical sweeping of multi-level parking lots, warehouses and production buildings as well as outdoor areas Battery power supply provides high flexibility, allowing work also in closed places, buildings, warehouses Large working width (1200mm) ensures high surface efficiency Very legible and intuitive control panel.

Condition: reconditioned (used), Year of construction: 2022, functionality: fully functional, fuel type: electric, empty load weight: 41 kg, Equipment: second-hand vehicle warranty, IPC GANSOW 664 SWEEPING MACHINE NEW SONNENSCHEIN 12V 50Ah GEL BATTERY Manufactured in 2022 A new cylindrical brush combined with a new side brush provide excellent sweeping results. New rubber guards around the main roller ensure dust-free sweeping. High surface coverage of up to 2600 m²/h. The machine is in perfect condition, both visually and technically. The device has undergone a complete, meticulous technical overhaul. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Power supply: battery Lhsdpfsw Dcq Hox Ahtjk Theoretical capacity (m²/h): 2600 Working width (mm): 600 Working width with 1 side brush (mm): 825 Dustbin capacity (l): 45 Filter surface area (m²): 1 Weight ready for use (kg): 41 Dimensions (L x W x H) (mm): 1033 x 815 x 994 INCLUDED: NEW SONNENSCHEIN 12V 50Ah GEL BATTERY NEW cylindrical brush NEW side brush NEW air filter New rubber guards roller Garbage tank

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, operating hours: 14,180 h, load capacity: 1,600 kg, lifting height: 3,140 mm, free lift: 1,500 mm, construction height: 2,140 mm, fork length: 1,000 mm, TECHNICAL DETAILS Load capacity: 1,600 kg Lifting height: 3,140 mm Overall height: 2,140 mm Free lift: 1,500 mm Lhjdpfezvu Apex Ahtek Fork carriage: 2A Fork length: 1,000 mm MACHINE DETAILS Mast: Duplex (2F314) Drive: Electric Transmission: Impulse Battery: 48 V / 475 Ah, year of manufacture 2015 Dimensions & Weight Dimensions (L × W): 2,200 × 1,100 mm Own weight: 3,654 kg Front tires: 18 × 7-8, 40 % Rear tires: 16 × 6-8, 10 % Operating hours: 14,180 h EQUIPMENT Side shifter Note: Tilting function and side shifter are defective.

Year of construction: 1959, condition: used, The machine has various defects and would require an overhaul, defects: no operating manual, no safety valves for the return stroke (no dual-channel design), no safety valves for ram down, in single-stroke operating mode the stroke is automatically completed once the brake is reached, missing cover/door for the control cabinet, selector switch is not secured, there is a continuous-run operating mode which behaves similarly to the single-stroke operating mode, no simultaneity monitoring for ram down, the safety guard on the rear of the press is not electrically interlocked and can remain open during the press stroke, a large amount of oil in the side frame, valve leaking, the machine is operational. On-site inspection is possible. Lsdpfx Aszv T Iwohtehk

Condition: repair required (used), Year of construction: 1998, functionality: limited functionality, turning length: 330 mm, turning diameter: 248 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 190 mm, travel distance Z-axis: 370 mm, The machine’s control system is defective. TECHNICAL DETAILS Turning diameter: 248 mm Turning length: 330 mm Travel distance X-axis: 370 mm Travel distance Z-axis: 190 mm Spindle bore: 45 mm Spindle speed: 6,000 rpm Tailstock quill travel: 120 mm MACHINE DETAILS Transformer: 400 V / 200 V EQUIPMENT Integrated CNC control Machine and control as a closed transport unit Linear guides in the X and Z axes Continuously variable AC main spindle drive Programming for constant cutting speed Integrated cold light Power meter for the main spindle drive Controls for automatic, manual operation and CNC programming Central control panel on the right side of the machine High-dynamic three-phase servo motors for the X and Z axes Backlash-free, pre-tensioned precision lead screws for the X and Z axes Automatic central lubrication with electrical monitoring for bed, cross slide and ball screw drives Coolant system with tank, pump, lines and nozzle Electric 12-station turret system MORI SEIKI with automatic direction logic Direct coolant supply through the turret Fixed hydraulic unit for the power chuck Full enclosure of the working area Front sliding door with large viewing window Electrical connection for chip conveyor prepared Data interface V.24 / RS-232-C Control cabinet Lhjdpezul Utsfx Ahtok Freestanding transformer 400 V / 200 V

Condition: defective spare-parts repository (used), Year of construction: 2013, operating hours: 2,281 h, functionality: not functional, machine/vehicle number: 8000221147, working width: 850 mm, overall weight: 350 kg, tank capacity: 170 l, water tank capacity: 145 l, battery voltage: 36 V, IPC Cleantime 160BT85, Ride-On Scrubber Dryer - Not operational - Faults: Brush motor / Rear wheel / Front wheel (drive) Without brushes / without batteries / without charger Color: green Working width: 850 mm (squeegee width 1010 mm) Solution tank: 145 l Recovery tank: 170 l Brush motor: 2 x 500 W Drive motor: 560 W Weight: 353 kg Various brushes, pad holders, and additional accessories available on request! Key features: - 3 selectable programs for light, medium, and intensive cleaning - SLS system: brush head automatically compensates for uneven floors - Tool-free brush change from operator seat via button press - Solution flow adjusts automatically to driving speed - Continuously variable fresh water supply - Excellent service accessibility to all components - Flashing beacon as standard - Robust, impact-resistant plastic tanks - Large cleaning opening on recovery tank - Tilting tank for easy cleaning - Automatic squeegee lift in reverse Lhedpfoxlqq Uox Ahtjk - Automatic shutdown of brushes and water supply when stationary - 4-way reversible and tool-free squeegee blade replacement - Display with hour meter and diagnostic system - Quiet operation due to high-grade sound insulation

Condition: defective spare-parts repository (used), Year of construction: 1994, functionality: not functional, We are selling an industrial robot, type IRB 1500, with an S3 controller from ABB Robotics, manufactured in 07/1994. The unit is defective/not operational and displays the following error messages (see photos): - 506 Servo error 2 - 536 Motor overload error The robot can be moved slightly intermittently until the error messages reappear. We are selling the robot as a complete package, including the control cabinet, operator panel, and metal frame. Individual parts are not for sale. Lhjdpfx Aozh Uvgohtok Please note that we offer neither a guarantee nor a warranty. Returns after purchase are not possible. After the purchase, the robot can be collected by appointment during our business hours. If required, we will gladly assist with loading. Selling price: €3,250 (negotiable) plus VAT.

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Lhjdpfx Ahszizkyjtsk Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: used, mileage: 1,74,540 km, power: 77 kW (104.69 HP), first registration: 07/2017, fuel type: diesel, next inspection (TÜV): 05/2027, color: white, gearing type: mechanical, emission class: euro6, number of seats: 9, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), had accident, immobilizer system, soot filter, * €6,500.00 NET * Transit Custom 2.0 TdCi L1H1, 9 seats, sliding door, ENGINE DEFECT, air conditioning, Euro 6 * 9 seats (3+3+3) * 6-speed transmission * Armrest * Radio/CD * Front airbags * Cruise control * Air conditioning * Start/Stop system * Multifunction steering wheel * Onboard computer * USB * Electric windows Lhsdpfszbgk Dox Ahtjk * Electric mirrors * Sliding door on the right * Central locking * Tire pressure monitoring system * Isofix * ABS * ESP * Parking assist front + rear (PDC) * Fog lights * Wheelbase 293 cm * Unladen weight 1945 kg * Payload 1195 kg * Permissible total weight 3140 kg * Passenger car registration * Vehicle number: ????ENGINE FAILURE - ENGINE DEFECT????? ????ENGINE BROKEN - ENGINE DEFECT????? ????ENGINE DAMAGED???? OPENING HOURS Monday - Friday from 9:00 AM - 5:00 PM (by appointment...) CONTACT INFORMATION Phone: WhatsApp: Email: Delivery and customs license plates (export number) available from us. Errors, typing errors and prior sale are subject to change. Technical specifications and equipment features must be checked separately. The condition according to the contract is only what is inspected on site at the time of purchase and confirmed in writing. Please arrange an appointment...

Condition: like new (used), Year of construction: 2015, operating hours: 9,925 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 55 m/min, controller manufacturer: Heidenhain, controller model: TNC 640, table width: 900 mm, table length: 1,150 mm, table load: 2,000 kg, overall weight: 22,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 9,925 h, coolant supply: 80 bar, tool length: 500 mm, tool diameter: 160 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale: Top-maintained 5-axis simultaneous universal machining center Hermle C52U with a new spindle (replaced in 03/2025) and only 400 hours of operation since replacement! Year of manufacture: 2015 Control unit: Heidenhain TNC 640 Travel paths: X: 1000 mm Y: 1100 mm Lhjdpfsygx Hnox Ahtok Z: 750 mm A: +100°/-130° C: 360° Table load: 2000 kg Clamping surface: 1150 mm x 900 mm Equipment: - Heidenhain TNC 640 control - AVD active vibration damping - ACC active chatter suppression - AFC adaptive feed control - Heavy-duty machining (HDM) - Spindle speed: 18,000 rpm - Spindle interface: HSK-A63 - 60 tool positions - 9-way rotary union - Scraper belt conveyor - A3 Blum tool breakage/tool measurement - 3D touch probe Heidenhain - Electronic thermal compensation - ICS 80 bar with paper band filter - External air blast - Internal air blast - Electronic hand wheel - Hardware kinematic option - Manual cabin door - Automatic cabin roof - Chip rinsing gun ...and much more. The machine is available immediately! The machine is in excellent condition with no defects! All services performed by Hermle! Spindle replacement also carried out by Hermle! Invoice and test protocol available!

Condition: defective spare-parts repository (used), Year of construction: 1993, operating hours: 40,042 h, functionality: limited functionality, machine/vehicle number: 1009, turning diameter over cross slide: 345 mm, turning length: 1,000 mm, turning diameter: 550 mm, spindle bore: 80 mm, spindle speed (max.): 3,200 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 285 mm, travel distance Z-axis: 1,070 mm, spindle motor power: 34 W, rapid traverse X-axis: 10 m/min, rapid traverse Z-axis: 15 m/min, rotational speed (min.): 50 rpm, rotational speed (max.): 3,150 rpm, total height: 2,180 mm, total length: 5,755 mm, total width: 2,350 mm, type of input current: AC, overall weight: 7,500 kg, chuck outer diameter: 315 mm, Equipment: rotational speed infinitely variable, Manufacturer: TRAUB Type: TND 550 Year of manufacture: 1993 Operating hours: approx. 40,000 hours Condition: defective / not operational For sale is a TRAUB TND 550, manufactured in 1993. The machine was in use at our facility until recently. Currently, the control system does not start, meaning the machine is not operational at this time. We have not investigated the cause of this issue further. Therefore, no statement can be made as to whether the cause lies in the control system itself, the power supply, or another machine component. The following defects were already known prior to the current failure: Gear shifting not functioning. The machine was permanently in gear 2, with a speed range up to approximately 3,200 rpm. Driven tools not functioning. Tailstock operation is performed via an added toggle switch. The turret moves or shifts only in slow motion. The ball screw of the X-axis causes running noises. Lodpfezd Udisx Ahtshk The running noises of the ball screw of the X-axis have been present since we purchased the machine in 2021. Despite these running noises, the machine was able to reliably produce H7 fits until the current failure. The causes of the aforementioned defects, as well as the current failure, have not been fully investigated. The machine is therefore explicitly sold as defective, non-operational, and in need of repair, and is suitable, for example, for repair, as a source of spare parts, or for reconstruction. Inspection is possible by appointment. Sale in the existing "as is" condition. All information is provided to the best of our knowledge, but without warranty. Sale with exclusion of any warranty for the mentioned and possible further, currently unknown, defects.

Condition: not inspected (used), Bosch Rexroth Type: SCARA SR6, control panel defective Bosch Rexroth articulated-arm robot, turbo SCARA SR6 with control unit Rated load: 2 kg Maximum load (sleeve diameter 20 mm): 5 kg Maximum load (sleeve diameter 25 mm): 8 kg Rated maximum moment of inertia (axis 4): 500 kgcm² Maximum moment of inertia (axis 4): 1000 kgcm² Horizontal force, continuous/maximum: 60/150 N Vertical force, continuous/maximum: 200/300 N Torque (axis 4), rated/maximum: 5/10 Nm Condition: used Lodpfjzh U R Rex Ahtjhk Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Year of construction: 2012, condition: repair required (used), I am selling this machine. The control board of the top-of-the-line printer was recently replaced, and it has otherwise been recently serviced. However, a tape motor is now defective and will no longer be repaired by us. We are offering this Bizerba GLM-I 150, manufactured in 2012, which requires repair. Manufacturer: Bizerba Model: GLM-I 150 Year of manufacture: 2012 Rated voltage: V Mains frequency: Hz Power consumption: kW Current consumption: A Protection class: Weight: kg Lhodpfxozvxrhe Ahtok If you have any questions or require further information, please send us a message or call us.

Year of construction: 2012, condition: ready for operation (used), This FANUC ROBOSHOT S-2000 i 150B was manufactured in 2012. A pristine electrical injection moulding machine, it has never been used, maintaining zero working hours. It features a 52 mm screw diameter. Consider the opportunity to buy this FANUC ROBOSHOT S-2000 i 150B electrical injection moulding machine. Contact us for more information. Application Types Injection Moulding Lodpfx Aex D Rq Eehtshk

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, saw blade diameter: 700 mm, table width: 6,000 mm, OPTIMIZING AND DEFECTING CROSS-CUTTING LINE CURSAL MOD. TRV 2000E 700 SX Line configuration: - Motorized roller conveyor 6000 x 760 mm - Chain feeder with singulator (buffer magazine) for boards from 4500 mm up to 6000 mm, capacity 6 boards - Optimizing and defecting cross-cutting saw Cursal mod. TRV 2000 E 700 SX - Roller feed system - Blade diameter 700 mm - Max feed speed 150 m/min - Cutting section 480 x 65 mm - Cutting section 530 x 30 mm Lodpfxjywdx Se Ahtehk - With chalk defect marking system - Year 2015 - Outfeed conveyor belt 5000 x 600 mm - Bilateral overhead ejector - N. 2 transfer conveyors for semi-finished parts (1 right + 1 left) - N. 2 accumulation roller conveyors (1 right + 1 left)

Condition: used, Year of construction: 2003, Screw compressor, compressor, compressed air unit, stationary compressed air compressor Ljdpfx Ahjhabk Detehk -Handover in its current condition as inspected -defective, not functioning, problem: frequency converter does not communicate with the software -Delivery rate: 3.2-6.9 m³/min -Engine power: 18-24 kW -Structure: encapsulated -Max. pressure: 12.75 bar -Operating hours: 108252 h -Load hours: 30754 h -Year of manufacture: 2003 -Dimensions: 1850/850/H1900 mm -Weight: 592 kg

Condition: not inspected (used), Year of construction: 1990, functionality: unexamined, Milling machine Maho MH 500 E2 with Phillips CNC 432 control system. Fixed table, SK 40 spindle mount with hydraulic clamping. 16-position vertical tool changer. The machine has been standing idle for some time and has not been tested. It is being sold as defective. Lhedozvbkmjpfx Ahtek

Condition: used, machine/vehicle number: IC1448, Year of construction: 1998, lifting height: 2,924 mm, fuel type: diesel, mast type: simplex, 5246171 Ljdpfozth T Aox Ahtohk Serial Number: 379J12331112 battery not good, lifts, but not holding, no charger

Year of construction: 2021, condition: used, functionality: fully functional, This is the latest generation of the VarioCooking Center, the iVario Pro L, manufactured in 2021 by the premium manufacturer Rational (successor to the VCC 211). A major inspection was carried out in our in-house workshop, and the iVario L is in excellent condition. The offer does not include any accessories, but they can be purchased separately for an additional charge. The list price for this unit is €19,976 net = €23,771.44 gross. You will receive an invoice with VAT shown. Lhjdpfxozvndtj Ahtjk Service: We will gladly assist you in finding a certified Rational customer service provider throughout Germany. Are you looking for a specific Rational device type? Ask us, we have access to a wide range of used and new equipment. We will be happy to advise you on all device types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our service for you: 6-month warranty on all electrical parts, limited to the replacement of defective parts, without installation and removal costs High-quality branded equipment at fair prices Professional overhaul/inspection & expert cleaning Tested & fully functional - or your money back Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 Technical data: W x D x H: approx. 1030 x 894 x 1078 mm Power connection: V: 400 / kW: 27.3 / Hz: 50 Year of manufacture: 2021 Serial number: E21VK21038052776 Capacity: 100 liters Weight: 216 kg Condition: Used, inspected, fully functional Further details: Integrated 230 V socket Integrated hand shower with automatic retraction and spray dosing High-quality pot base, seamless with rounded corners Core temperature sensor with 6 measuring points 1,200 programs with up to 12 steps each, programmable and nameable Integrated hose shower on the unit Integrated water drain in the pot Temperature unit adjustable in °C or °F Cooking pot can be tilted Lid with integrated water inlet Automatic display of service messages IPX5 splash water protection USB interface for HACCP data output and updates Including base unit with plastic feet Functions: Manual mode (30°C-250°C): adjust liquid temperature, adjust pot base temperature, adjust oil temperature Automatic, liter-accurate water filling device Delta-T cooking Auto Lift: lifting and lowering device (baskets for cooking and frying) Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors Do you have any questions, would you like to receive advice or would you like to see something on site? You can reach us by telephone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (AGB).

Condition: used, Year of construction: 2018, operating hours: 18,996 h, machine/vehicle number: IntNr231654, A high-performance HAAS UMC-750SS 5-axis universal machining center, manufactured in 2018, is for sale. Lhjdpfozv D Emsx Ahtok Technical specifications: Manufacturer: HAAS Automation Model: UMC-750SS Machine type: 5-axis universal machining center / vertical CNC machining center Year of manufacture: 2018 CNC control: HAAS CNC / Next Generation Control Number of axes: 5 Travel ranges: X-axis: 762 mm Y-axis: 508 mm Z-axis: 508 mm Integrated 2-axis trunnion rotary table Table/faceplate diameter: 500 mm B-axis swivel range: -35° to +110° C-axis: 360° C-axis clamping mechanism is defective Maximum table load: 300 kg Main spindle: 15,000 rpm Spindle power: 22.4 kW / 30 hp Inline direct drive Tool holder: SK40 / 40 taper Tool changer: Side-mounted automatic tool changer Capacity: 40+1 tool positions High-Speed Side-Mount Tool Changer Rapid traverse X/Y/Z: up to approx. 30.5 m/min OTS – tool measuring probe The machine can be inspected on-site by appointment. Subject to changes and errors in the technical data and information, as well as prior sale!

Condition: used, Year of construction: 2018, machine/vehicle number: 1743, functionality: fully functional, operating hours: 36,725 h, power: 6 kW (8.16 HP), table width: 2,000 mm, table length: 4,000 mm, total length: 12,000 mm, total width: 3,000 mm, overall weight: 14,250 kg, Condition The machine is in used, fully functional condition and is currently still in operation. No known defects are present. Scope of supply The scope of supply includes: ByTrans loading system for automatic loading and unloading Ledpozhmh Iofx Ahtshk Existing documentation and operating manual Small quantity of wear parts Location and inspection Location: ASCO Anlagenbau Inspection: Possible by appointment Loading: Possible Availability: By agreement

Year of construction: 2002, condition: used, functionality: unexamined, machine/vehicle number: 2123, TECNOMACO ITALIA / FAMAR AP60 Blister Packaging Machine – Year 2002 TECNOMACO ITALIA S.r.l. – FAMAR AP60 Lhsdpfxozvycne Ahtsk Italian Blister Packaging Machine Year: 2002 Professional industrial blister packaging machine designed for the packing of tablets and capsules in PVC/ALU blister packs. The machine is supplied with: -1 size part for tablets -1 size part for PVC/ALU blister packs, Configuration for 10-cell blister packs, Tooling suitable for capsules size “0” -Blister camera control system which costed 12200 eur in 2018 ) for automatic product inspection and verification inside the blister packs. Camera system installed in a dedicated stainless-steel protective enclosure mounted directly on the blistering machine Stainless-steel construction suitable for pharmaceutical and food-supplement production environments.The integrated camera control is designed to perform a product presence and blister inspection check, helping identify missing, incorrectly positioned, or potentially defective products before the blister packs proceed further in the packaging process. The FAMAR AP60 is a robust Italian-built blister packaging solution suitable for pharmaceutical, nutraceutical and food-supplement production, offering a compact and professional solution for PVC/ALU blister packing. Manufacturer: TECNOMACO ITALIA S.r.l. / FAMAR Model: AP60 Country of manufacture: Italy Year: 2002 Blister format included: PVC/ALU, 10 cells Capsule tooling included: Size “0” Additional tooling: One size part for tablets Inspection system: Blister camera control with stainless-steel protective housing Condition: Used industrial equipment. Sold as seen.

Year of construction: 2003, condition: defective spare-parts repository (used), functionality: not functional, Cieffe hardening oven Lhodpfx Aov Dlkkehtjk The heating is partially broken and needs to be repaired. The oven is half disassembled. You are welcome to come by for a viewing by appointment.

Condition: used, mileage: 5,26,029 km, power: 338 kW (459.55 HP), first registration: 12/2018, fuel type: diesel, tire size: 315 / 70 / R22.5, axle configuration: 4x2, wheelbase: 3,900 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,280 mm, total width: 2,550 mm, total height: 4,000 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, fog lights, fridge, power mirror, retarder, second fuel tank, spoiler, General information Model code: #### Cab: XXL Technical information Number of cylinders: 6 Engine capacity: 12.419 cc Transmission Transmission: ZF, 12 gears, Automatic Axle configuration Tyre size: 315 / 70 / R22.5 Make axles: MAN Brakes: disc brakes Front axle: Max. axle load: 7500 kg; Steering; Tyre profile left: 25%; Tyre profile right: 25%; Suspension: leaf suspension Rear axle: Double wheels; Differential lock; Max. axle load: 11500 kg; Tyre profile left inner: 40%; Tyre profile left outer: 40%; Tyre profile right outer: 40%; Tyre profile right outer: 40%; Reduction: single reduction; Suspension: air suspension Weights Empty weight: 7.986 kg Carrying capacity: 12.514 kg GVW: 20.500 kg Interior Interior: grey Number of seats: 2 Condition General condition: average Technical condition: average Visual appearance: average Number of keys: 3 (1 hand transmitter) Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL = Additional options and accessories = - 12 volt socket - Aluminium fuel tank - Armrest - Baggage cover - Car kit - Intarder - Low-noise - Radio, MP3 enabled - Radio/CD player - Remote central locking - Speed limiter - Stability control - Toolbox Lhodozvd Alopfx Ahtok - Webasto