Used Gemini Esco Ring Rolling Machine With Decoiler for sale (70,737)

Year of construction: 1989, condition: used, functionality: fully functional, Model Gemini ESCO D6-SR with decoiler Year of manufacture: 1989 Max. material diameter: approx. 9 mm Max. processing length per stroke: approx. 62 mm Number of rotating tools: 3 (or turret version with 4 positions) Max. tool head speed: up to approx. 7,100 rpm Machine dimensions (machine bed only): approx. 1,000 × 3,400 mm Operating voltage: 380V 50 Hz Chjdpfxjyip E Te Alrea Control voltage: 110 V 50Hz Rated power: 3.4 kW Rated current: 6 A

Condition: new, Year of construction: 2026, Ring Rolling Machine Zopf - Model ZB 60 MD - with digital readout - motorized - two working rolls Chedpfjd Eyp Iox Alrea - shaft diameter 30 mm - including standard rolls - with basement - bending capacity round tube up to 48 x 3,2 mm - solid material up to 30 mm - weight around 180 kg - motor 0,75 kw 400 Volt 50 Hz 3 phase

Condition: good (used), Year of construction: 2008, 1 used profile ring rolling machine Make: Profiroll Bad Düben Model: URWA 250 Year of manufacture: 2008 Technical data: Control: SINUMERIK 840 D Rolling force: 800 kN Max. workpiece diameter: 250 mm Workpiece width: 80 mm Spindle diameter: 110 mm Spindle speed: 100–700 rpm Drive power: 110 kW Mandrel diameter: 45–100 mm Length: 2,600 mm Width: 2,600 mm Height: 2,600 mm Weight: 12.5 t Scope of delivery: Centralized lubrication Cedpfsyurx Tex Alroha Infinitely variable speeds Proportional measuring system Linear mandrel guide Mandrel run-out monitoring Process data management Rolling equipment: Feeder: 130–190 mm / W 46–80 mm Magazine: 130–190 mm Measuring head Separate cooling unit Electronic setup assistance Process visualization Ring stopper and turning device for rotating the rolled part

Condition: new, Year of construction: 2026, Ring Rolling Machine MB 50 - with standard roller set - footpedal Chjdpfx Asdkxlkjlroa - two drivn rollers - horizontal and vertical use - bending capacity round tube up to 60 x3,6 mm - angle iron 50x50x6 mm - solid steel 35 mm - main motor 1,5 kw - shaft diameter 50 mm - weight 325 kg - 400 volt 3 phase

Condition: used, Profile ring bending machine with manual crank drive, year of construction approx. 1950 Lower rollers Ø 56 mm with grippy knurling Codpfx Aljxbtx Hsrjha Lower roller width: 115 mm Upper roller Ø 100 mm Upper roller width: 110 mm - Symmetrical roller arrangement with 2 driven lower rollers - Upper roller adjustment 55 mm via threaded spindle - Manual crank drive with 6:1 gear ratio Required space (L x W x H): 440 x 660 x 1000 mm Weight: approx. 200 kg

Condition: new, Year of construction: 2026, Ring Rolling machine Zopf profile bending machine model ZB 100/3 H - three driven shafts - hydraulic adjustment of center roller - digital readout with memory - working position horizontal and vertical - shafts are supported by conical bearings - slide bars - shaft diameter 60 mm - roller diameter 215 mm Cjdpfed Eyz Uex Alrjha - main motor 1,5 kw - hydraulic mtor 1 kw - hydraulic pressure 18 ton - bending capacity flat material up to 80x15 mm on edge - round tube up to 100x2,0 mm - angle iron leg in and out side 70x70x8 mm - weight 800 kg

Condition: new, Year of construction: 2025, Profile Bending Machine ZOPF - Model ZB 110/3 H TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical - digital readout with memory - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable - shaft diameter: 80 mm - roller diameter: 260 mm - shaft rpm: 7 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 2,2 kW - motor for hydraulic: 1,5 kW - hydraulic pressure: 27 to. - adjusting way: 170 mm - weight: 1400 kg Chjdpfx Aedkxibslrsa - dimensions: 980x1430x1600 mm

Condition: new, Year of construction: 2025, Ring Rolling machine ZOPF - model ZB 30/3 MD TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface - manual adjusting of the center roller - working position horizontal and vertical (optional) - digital readout Chsdsdktnvspfx Alroa - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable - shaft diameter: 20 mm - roller diameter: 76-86 mm - shaft rpm: 11 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 0,18 kW - adjusting way: 35 mm - weight: 85 kg - dimensions: 530x420x500 mm

Condition: new, Year of construction: 2025, Bending machine ZOPF new - model ZB 80/3 H - with foot pedal - with standard roller set TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical Codpsdkxiyofx Alrsha - digital readout with memory - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable - shaft diameter: 50 mm - roller diameter: 192 mm - shaft rpm: 7,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,5 kW - motor for hydraulic: 0,75 kW - hydraulic pressure: 10 to - adjusting way: 120 mm - weight: 680 kg - dimensions: 900x800x1300 mm

Condition: new, Year of construction: 2025, Ring Rolling machine Zopf Chjdpfx Aljd Ey A Aerja profile bending machine model ZB 100/3 H - with NC control - three driven shafts - hydraulic adjustment of center roller - working position horizontal and vertical - shafts are supported by conical bearings - slide bars - shaft diameter 60 mm - roller diameter 215 mm - main motor 1,5 kw - hydraulic mtor 1 kw - hydraulic pressure 18 ton - bending capacity flat material up to 80x15 mm on edge - round tube up to 100x2,0 mm - angle iron leg in and out side 70x70x8 mm - weight 800 kg NC control unit: two axes controlled touch screen memorize of 1000 programs interpolation

Condition: new, Year of construction: 2025, Bending machine ZB 70/2 M - with foot pedal - with standard roller set - two driven shafts - mecanical adjusting of the center roller - working position horizontal and vertical - shafts are supported by conical bearings - slide bars on the slide Cjdpfxjt Hwfne Alroha -support are exchangeable - shaft diameter: 40 mm - roller diameter: - shaft rpm: 8,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,1 kW - adjusting way: 120 mm - weight: 400 kg - dimensions: 900x600x1100 mm

Condition: used, Roll sets for profile bending machine, 3-roller ring bending machine HERKULES WETZLAR The rollers are suitable for a HERKULES WETZLAR profile bending machine, type BO 238 N. Shaft diameter: 60 mm with an 18 mm keyway. 2 pieces, roller set No. 1, roller diameter 110 mm, roller width = 180 mm. Chedpfx Aljglaq Ierea 2 pieces, roller set No. 2, roller diameter 160 mm, roller width = 40 mm. 3 pieces, roller set No. 3, roller diameter 150 mm, for pipe diameter Ø 33 mm, roller width 87 / 115 mm. - Roller set No. 3 with adapter ring from Ø 93 to Ø 60 mm, without keyway. The machine had 2 driven rollers. Total weight of all rollers: 57 kg. Good condition.

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: Cedpsxdmgvsfx Alreha CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: used, Thread rolling machine UPWS 25. Chedjzd Rf Nepfx Alrsa

Condition: good (used), CMC Italia Gemini Gem 52 Case in gluer Machine in perfect condition, like new. Manufactured by CMC Italia, Italy. This gluing device allows for the application of glue to both sides of the book block. Two gluers, smooth glue thickness adjustment. Chrome rollers, adjustable glue thickness. Very easy to clean. Cjdpfx Alozlggljreha Working width: 520 mm Power supply: 380 V Weight: 250 kg Made in Italy.

Condition: good (used), MBO K760E S-KTL/6+ Folding Machine with SBAP 82ME Press Manufactured in 2016. Paper format: 760x1100mm Maximum speed: 180m/min High stack feeding, FP-95 pallet feeder 6 cassettes on the first unit 2 knives 1 side cassette after the knife Additional veneer cassette. Sound insulation on all units Chjdpozlaimjfx Alroa MBO SBAP-82ME stacking press Spare parts and documentation included. The machine is in perfect condition, ready to work.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Siemens, controller model: PLC, number of rollers: 4, roller (bottom) diameter: 190 mm, roller (top) diameter: 210 mm, side roll diameter: 170 mm, roller diameter: 210 mm, roller length: 2,050 mm, working width: 2,000 mm, roller height adjustment: 700 mm, working height: 700 mm, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 5 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 15 mm, sheet thickness copper (max.): 15 mm, overall weight: 5,000 kg, total length: 4,600 mm, total width: 1,400 mm, total height: 1,700 mm, power: 5.5 kW (7.48 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, number of digital displays: 1, warranty duration: 24 months, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, W12-8X2000 Four-roller Plate Rolling Machine This machine is equipped with plate end pre-bending and CNC rolling functions. It allows the metal plate to be fed in one single pass, completing pre-bending and roll forming of the workpiece without the need for turning over the plate. Codpfsy Ugtasx Alrjha The upper working roller serves as the main drive roller, while the lower roller and two side rollers are hydraulically driven. Their lifting strokes are controlled by the CNC system, enabling automatic leveling with a synchronous display accuracy of ±0.1 mm. The tilting and resetting of the tilting bearing housing adopts a hydraulic transmission structure, and the upper roller is equipped with a balancing mechanism to facilitate the removal of the finished workpiece. The machine comes with a movable independent control console for flexible repositioning at any time, and is equipped with safety interlock devices to ensure safe and reliable operation. Working Roll Material The working rolls are made of 42CrMo high-strength premium alloy steel, manufactured through forging, rough machining, and quenching & tempering heat treatment, achieving a bulk hardness of HB 240–300. After finish machining, they undergo medium-frequency induction hardening, resulting in a surface hardness of HRC 47–58. The products comply with the JB/ZG4289-86 standard for roll steel, ensuring uniform roll rigidity with a controlled deflection of (1/700–1/1000)L. Note: L refers to the center distance between the two side frames. The entire production process strictly follows the standard manufacturing flow for rolls, fully guaranteeing the comprehensive mechanical properties of the working rolls. Working Roll Rotation & Drive System The upper roll is the driving roll of the four-roller rolling machine. It is fitted with an independent hydraulic motor directly coupled to the heavy-duty gear housing, with no intermediate gear transmission. This is the most energy-efficient drive design. The hydraulic motor is equipped with an instant braking device, enabling accurate positioning of the roll shaft during pre-bending operations. Double-row spherical roller bearing Excellent Self-aligning Performance The outer ring adopts a spherical structure, allowing the inner ring and roller assembly to deflect within an angle of 1.5°~3°. It can automatically compensate for misalignment caused by installation errors and shaft deflection, preventing seizure and abnormal wear. Heavy Load & Impact Resistance Line contact between rollers and raceways enables the bearing to withstand extremely high radial loads as well as bidirectional axial loads, perfectly suited for heavy-duty working conditions of rolling machine rolls. High Durability Made of high-strength bearing steel with quenching and other heat treatments. Combined with a well-designed lubrication system, it ensures long-term stable operation under harsh conditions and greatly reduces downtime for maintenance.

Condition: new, Year of construction: 2026, Metal roof snap lock machine SLP-1 auto with side punching option is the latest project of our company in the direction of equipment for metal roofing production. Snap lock machine SLP-1 auto can produce click-seam panels with fixation holes and punch off side parts of the panels, it makes possible to bend the edge of the panel and join it to the roof elements after. Our machine is equipped with an automation system and make production in a fully automatic mode. This process comes following way: operator of machine put end of metal roll to the pulling rollers of the machine, which moves it to the rolling part of the equipment. At the beginning of the rolling process, two pneumatic punching presses from each side of machine make side cuts of panels. After cutting, the rolling process goes to the next rolling rollers. They gradually form the roofing panel profile and cut out fixation holes with special cutting tool rollers. After rolling, special automatic shear at the end of machine cut off the panel into length with necessary sizes. As machine cuts side parts of panels at the beginning of production process, so it cuts only flat part of panel in the end of production. It makes panel quality better and there are no any deformations as with a profile cutting happens, when guillotine shear has to cut not only flat part but also the lock part of panel. Specifications: Dimensions (mm): rolling machine 3000x1400x900 guillotine shears 400x1120x1130 Weight (kg): rolling machine 643 guillotine shears: 110 Drive power: rolling machine: 1.5 kW, 220V (or 380V on request) guillotine shears: 1.1kW Maximum thickness of sheet metal (mm): 0.6-0.7mm Workpiece Width (mm): 250-700 Rolling speed (m/min): up to 10 Metal roof panel machine SLP-1 auto has an automation system so help to make minimum part of operator works - he just sets necessary number of panels and their length on the computer to produce, and the machine automatically rolls and cuts them. Therefore reducing the influence of the human factor, manufacturing errors are minimum and panels are all the same sizes and ready for further installation. SLP-1 auto click lock roll forming machine has easy width adjustment system, so to change machine from one panel width to another, the operator just needs to turn the adjustment wheel, so the readjustment takes a very short time for such operation. As additional options metal roof panel roll forming machine SLP-1 auto can have: Cutting knife to cut metal from coil at the end of the metal rolling process to reduce the amount of possible waste material; Ribbed panel rolls, to roll narrow or wide ribs in the center of the roofing snap lock panel; Microwave panel module- device to form small bends along the entire width of the roofing panel, making the appearance of the roof more interesting and eye-catching. Chjdpfx Alouzv Tzsrea Metal unwinder (can be floor-standing, manual console, automatic console).

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, Operating hours: approx. 22,800 h Laser on: approx. 40,100 h Voltage: 400 V Frequency: 50 Hz Chjdpfxsyyygko Alrja Power: 3,200 W

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Laser power: 3KW, 6KW, 12KW Standard hardware: waste car, fully automatic butter injection, dual-control workbench, adaptive multi-angle site placement, beam light curtain Optional hardware: fire bricks, high-pressure proportional valve (standard for 6KW and above), safety door lock, Independent laser cabinet, rear exchange table light curtain, rear lifting light barrier, Chsdpewz Ukyefx Alrsa Rear camera, internal camera, monitoring display, radiation-proof glass, upper cover fan, upper cover, partition dust removal

Condition: new, Year of construction: 2026, Automatic Roll Forming Line for Light Gauge Steel Frame Production This automatic roll forming line is designed for manufacturing Light Gauge Steel (LGS) and Cold Formed Steel (CFS) structural profiles used for steel frame houses, modular buildings, commercial buildings and prefabricated construction systems. The production line automatically performs feeding, leveling, punching, roll forming, profile marking and hydraulic cutting according to digital production data. It is an ideal solution for manufacturers of: Light Gauge Steel structures Steel frame houses Prefabricated buildings Modular buildings Tiny houses Commercial steel structures Residential steel framing Cold formed steel construction systems Flexible Machine Configuration The roll forming line can be supplied in two different configurations depending on production requirements. Fixed Profile Machine Designed for manufacturers producing one profile size with maximum productivity and simplified machine setup. Multi-Profile Roll Forming Machine Cedpfezrt Ivox Alrjha An adjustable roll forming system capable of producing several profile widths on one machine by changing the roll forming configuration. This solution provides greater production flexibility while reducing investment costs compared with purchasing multiple dedicated production lines. Complete Automatic Production Process The machine automatically performs the following operations: Coil feeding Strip leveling Servo punching Hole punching Slot punching Service hole punching Roll forming Profile identification marking Hydraulic cutting to length Finished profile discharge The production line is designed to work with professional steel frame design software. The operator imports production data generated from a building design into the machine control system. Based on this information the machine automatically manufactures every structural member including: wall studs tracks floor joists roof trusses rafters beams structural reinforcements Each component is produced with the correct length, punching pattern and identification marking required for final assembly. Automatic Profile Marking Each profile can be automatically marked during production. Typical marking information includes: Profile number Wall identification Member position Assembly reference Project identification Automatic marking significantly simplifies profile sorting and speeds up on-site assembly. Instead of manually identifying every component, installers receive a complete production kit with every profile clearly identified. Automatic Punching System All punching operations are synchronized with the roll forming process to achieve high accuracy and repeatability. Main Advantages Fully automatic production Computer controlled manufacturing Automatic profile marking Servo punching system Hydraulic cutting High dimensional accuracy Reduced material waste Fast production Flexible profile sizes Suitable for custom house projects Reduced manual labour Easy assembly thanks to profile identification Applications Technical Specifications Typical options include: Single-profile roll forming machine Multi-profile adjustable machine Automatic profile marking Servo punching Hydraulic cutting Automatic decoiler Hydraulic decoiler Computer control system Production management software compatibility

Condition: new, Year of construction: 2026, total width: 750 mm, total length: 2,900 mm, total height: 1,160 mm, warranty duration: 12 months, overall weight: 400 kg, Compact roll forming equipment for producing metal rainwater downpipes This portable roll forming machine is designed for the production of rectangular metal downspouts and rainwater downpipes from pre-painted or coated sheet steel. The machine progressively forms a flat metal strip into a finished rectangular profile suitable for residential, commercial and industrial rainwater drainage systems. The dimensions and geometry of the finished downpipe can be manufactured according to the customer’s technical requirements. The roll tooling is designed for a specific rectangular profile, taking into account the required width, height, corner shape, surface pattern, material thickness and connection type. The machine is suitable for manufacturers of: rectangular metal downspouts; rainwater downpipes; roof drainage systems; gutter and downspout components; roofing accessories; façade and sheet-metal products; custom cold-formed metal profiles. Its compact size and relatively low weight make it suitable for small workshops, roofing companies and production sites where a large stationary roll forming line is not required. Custom profile dimensions The finished profile is produced according to the customer’s drawing, sample or technical specification. The machine is therefore supplied as a custom rectangular downspout roll former, configured for the required finished product. The basic production process is: Csdpfx Aljzrnxcorjha Decoiler → Roll forming system → Manual saw cutting Main advantages Compact and portable construction Custom tooling for the required downpipe size Production directly from coated sheet steel Suitable for pre-painted and galvanized material Gradual roll forming with controlled material deformation Low installed motor power Simple operation and maintenance Suitable for small-batch and regular production Finished products can be cut to the required length Reduced dependence on purchased ready-made downpipes Suitable for workshops with limited production space Material The standard configuration is designed for coated sheet steel with a thickness of approximately 0.4–0.5 mm. Depending on the agreed configuration, the machine may process: pre-painted steel; galvanized steel; polymer-coated sheet steel; other thin sheet-metal materials after technical approval. The exact material grade, tensile strength, thickness and coating must be specified before the roll tooling is designed. Technical specifications: Machine type Portable roll forming machine Finished product Rectangular metal downspout / downpipe Profile dimensions According to customer specification Material Coated sheet steel Material thickness Approx. 0.4–0.5 mm Forming speed Approx. 3–8 m/min Main motor power 3 kW Transmission Gear and sprocket drive Auxiliary forming elements Polyurethane wheels Cutting system Manual circular saw Machine dimensions Approx. 2860 × 730 × 1160 mm Machine weight Approx. 400 kg Electrical supply 380 V, 50 Hz, 3-phase* Compact machine design This makes it suitable for: roofing contractors; rainwater system manufacturers; sheet-metal workshops; gutter and downpipe producers; building component manufacturers; small and medium-sized production facilities; companies producing custom roofing accessories. Scope of supply A custom set of roll forming tools will then be designed for the required product.

Condition: used, Year of construction: 1995, material width 300 mm coil weight 1,25 t material thickness 0,4 - 3,5 mm coil internal diameter 320 - 420 mm coil external diameter 1300 mm material cross-cut 750 mm² no. of straightening rolls 11 straightening roll diameter 60 mm number of draw-in rolls 4 roll diameter 60 mm speed 5 - 30 m/min power requirement 5,0 kW Weight 1,4 t Dimensions (WxDxH) 3,3 x 1,85 x 1,7 m Straightening machine (Type 1675-B11-FQ) Cjdozrpu Sopfx Alrjha with infinitely variable drive, driven straightening rolls, manual individual adjustment of the roller cassette, cntralized adjustment of the material width, outlet rolls Decoiler, single (Type 2350 B-FPS) not driven, with pneumatic lag break, hydraulic centralized expansion, pneumatic snubber roll coil loop control via sensor

Condition: used, Year of construction: 1998, material width 100 - 450 mm material thickness 1,0 - 14,0 mm coil weight 10,0 t coil internal diameter 470 - 520 mm coil external diameter 1100 - 2000 mm no. of straightening rolls 12 straightening roll diameter 2x70 / 2x96 / 8x127 mm number of draw-in rolls 2 inlet roll diameter 160 mm min. material width 100 mm speed 15 m/min power requirement 75,0 kW weight of decoiler 6,4 t weight of straightening machine 12,8 t dimensions decoiler (WxDxH) 3,1 x 1,4 x 3,7 mm dimensions straightener (WxDxH) 2,5 x 3,4 x 2,7 mm Straightening machine RMS Vario-12-70/96/127-450 Chodpfx Aezrpr Djlrea with infinitely variable drive, driven straightening rolls, supporting rolls, upper straightening cassette hydraulic liftable, hydraulic threading wedge Decoiler HES 12-650 with infinitely varieble insertion drive, pneumatic lag brake, hydraulic snubber roll (motoric driven), hydraulic centralized expansion hydraulic coil lifting device hydraulic loop bridge coil loop control via ultrasonic cropping shears HSO 150-0450 working direction from left to right as is where is, WITHOUT putting into operation - Video at seller's site before dismantling available

Condition: used, Year of construction: 1997, material width 820 mm coil weight 7,5 t material thickness 0,8 - 5,0 mm coil internal diameter 470 - 520 mm coil external diameter 1600 mm material cross-cut 1600 mm² no. of straightening rolls 7 straightening roll diameter 50 mm number of draw-in rolls 2 speed 0 - 40 m/min Decoiler HH 7500.1 with: - hydraulic expansion and automatic re-tensioning - material centre adjustment - adjustable pneumatic disc brake Chedezrpp Ajpfx Alrsa - counter-holder with quick clamping - circular guard ring - fixed coil loading chair Insertion aid consisting of: - snubber roll (driven) - infeed wedge - hold-down roll Straightening machine BRM 50/820.7 with: - automatic circular oil lubrication of the cardan shafts - torque-dependent overload protection - motoric roller cassette adjustment with digital display - quick-change device of the cardan shafts - quick-change device of the straightening rolls Transfer table + ultrasonic control BÜU-5 with: - loop control via ultrasonic sensor (analogue) - strip sag monitoring (min/max) - strip end monitoring