Used Deckel Lkd for sale (698)

Year of construction: 1981, condition: good (used), machine/vehicle number: 2608-0129, Travel for the x-axis - 400 mm Travel for the y-axis 250 mm Travel for the z -axis 340 mm Table Surface area - 600 x 300 mm Turning speed range 40 - 3150 rpm Planetary grinding heads included. With full technical documentation There is no possible drilling and milling - no tooling Transport dimensions: 1.5 x 1.7 x 1.8 m, Weight ; 1300 kg. Pgjdpfxjd Dz Rhj Aahsu

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, machine/vehicle number: 57/2005, travel distance X-axis: 400 mm, travel distance Y-axis: 310 mm, travel distance Z-axis: 305 mm, workpiece diameter (max.): 260 mm, tool length: 900 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 400 mm Travel Y-axis: 310 mm Travel Z-axis: 305 mm Max. workpiece diameter: approx. 260 mm Max. tool length: approx. 900 mm Spindle power: up to 24 kW Tool holder: SK 50 Speed range: up to 12,000 rpm Grinding wheel changer: 8-position Tool changer: 155-position A-axis swivel range: 360° C-axis swivel range: 224° Feed rate: 2,000 mm/min MACHINE DETAILS Control: PMAC Dimensions & Weight Dimensions (L x W x H): 2,900 x 1,800 x 2,015 mm Total weight: 4,000 kg EQUIPMENT 8-position grinding wheel changer for up to 24 grinding wheels 155-position chain loader for automatic operation Workpiece gripper Measuring probe Automatic central lubrication system Direct position measuring system Infinitely variable spindle speed / feed rate control Hydraulic chuck 1 set of hydraulic collets Psdpoxqpitefx Aahogu Additional collets of various diameters for chain loader Grinding wheel holders with spacer rings Documentation Note: The LUST board (inverter drive) is defective and must be replaced.

Condition: ready for operation (used), Year of construction: 1984, functionality: fully functional, turning length: 600 mm, turning diameter: 400 mm, spindle bore: 73 mm, controller model: ELTRO MPULS, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Turning diameter: 400 mm Turning length: 600 mm Swing diameter: 600 mm Pgjdpfx Aexn I Sboahsu Spindle bore: 73 mm MACHINE DETAILS Control model: ELTRO MPULS

Condition: ready for operation (used), Year of construction: 2006, operating hours: 16,421 h, Control Unit Brand HEIDENHAIN Model iTNC530 Main Drive Spindle speed range 18000 Tool taper BT40 Number of axis 5 Movement X-Axis Movement 2500 mm Y-Axis Movement 920 mm Z-Axis Movement 820 mm This 5-axis DECKEL MAHO DMF 250 linear was manufactured in 2006. It features a Heidenhain iTNC530 control, extensive travel capabilities with X2,500mm, Y920mm, Z820mm, and a high-speed spindle at 18,000rpm. The machine includes a BT40 spindle taper, ATC 30 magazine, and full NC rotary capabilities on A, B, and C axes. Consider the opportunity to buy this DECKEL MAHO DMF 250 linear universal machining centre. Contact us for more information about this machine. Application Types Psdpfsxfcqyex Aahogu Milling

Condition: used, Year of construction: 1999, x-travel 800 mm y-travel 700 mm z-travel 600 mm Control Heidenhain Millplus weight of the machine ca. 12,5 t Pgjdpfjxqrh Eox Aaheu

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, DMG UNIVERSAL MACHINE CENTER DMU80P hi-Dyn Year 2001 Pgjdow A Dy Topfx Aahsu X800 Y700 Z 600mm Heidenhain iTNC530 NC Rotary Table Ø900x630mm NC B axis Milling Head Spindle 18,000rpm ATC 180 – HSK-A63 Roto Clear window Spindle thru' coolant 40 bar Cheap sales - 50.000,00 USD

Condition: good (used), Year of construction: 1986, CNC universal milling machine Make DECKEL Type: FP5NC Bj.1986 control DIALOG 4 Traverse paths: X710mm Y600mm Z500mm Clamping table : 1000mm x 550mm Podoxr A A Aepfx Aahsgu Tool clamp: SK40 Feed speed programmable: 2 ... 3600 mm / min Speed: 18 ... 6300 rpm Spindle power: 7.5KW machine in stock.

Condition: not inspected (used), Year of construction: 1999, functionality: unexamined, Controller Millplus Pjdpfx Aoxpx Hljahsgu Table size 1700 x 1400 mm Table load max. 5000 kgs X travel 1800 mm Y travel 2000 mm Z travel 1500 mm B swewerling -7/180 Grad C axis 1/360 degree Spindle speed 10000 rpm Tool holder ISO50 ATC Magazin 60-fold Spindle power 29,4 kW Place required LxW = 4000 x 6000 mm Weight cca 38 tons Features, accessories - Chip conveyor - Coolant tank with high pressure pump - Coolant through spindle - Fast speed head in magazin - MPG - Manuals Others: - The machine is recommended for retrofit or general overhauling Defects: - main spindle run loudly - B axis run lodly - some sensors are missing from magazin The machine must be checked deeply. The disassembling and loading on truck is on lasten of customer.

Condition: used, Year of construction: 2003, x-travel 1.600 mm y-travel 1.250 mm z-travel 1.000 mm size of pallet 1.000 x 1.250 mm control SIN840D power capacity at 40 % load 38,00 KW spindle turning speed - stepless 20 - 10.000 U/min power capacity at 100 % load 25,00 kW max. torque at 40% / 100% load 288 / 187 Nm tool taper SK50 feed X/Y/Z/-axis 20 - 15.000 mm/min rapid traverse X/Y/Z 60,00 m/min B - axis -150° / +80° x 0,001 ° feed B-axis 3600 ° / min C-axis 360 x 0,001 ° Rapid motion C- axis 1 - 3.600 U / min. table load 3000 Kg tool magacine with 240 tool diameter 110 mm wotkpiece diameter with 2 vacant positions 250 mm tool length - max. 650 mm weight of tools max. 15,00 kg total power requirement 75,00 kW weight of the machine ca. 55,00 t dimensions of the machine ca. 12,50 x 8,00 x 4,20 m 5-axis machining center with SIEMENS Sinumerik 840D control electronical handwheel operating mode 4 240-position tool magazine Pgsdexrvi Ajpfx Aahou 4-position pallet storage system TS641 measuring probe BLUM laser coolant system coolant through the spindle chip conveyor coolant cooling

Condition: ready for operation (used), Year of construction: 2001, Main Drive Number of axis 3 Table Pgedpfx Asxpyvbsahju Table load 500 kg Media Chip conveyor Yes Additional Equipment Thru Spindle Coolant Chip Conveyor This 3-axis DECKEL MAHO DMC 63V was manufactured in 2001. It features a working table of 800 x 500 mm, a tool magazine with 25 slots, and a main spindle speed of 8000 rpm. The machine can handle a maximum working load of 500 kg. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMC 63V machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: good (used), Year of construction: 2003, functionality: fully functional, CNC Machining Center DECKEL MAHO DMU 60T RS3 Year of manufacture: 2003 CNC Control: HEIDENHAIN MILL PLUS IT Travel distances: X-axis: 780 mm Y-axis: 560 mm Z-axis: 560 mm Pjdpfx Aaoxr D Dzohsgu Spindle speed: 12,000 rpm Tool holder: SK40 Tool changer: 120 positions Table: Swivelling rotary table Pallets: 5 pallets, each with dimensions 630mm x 500mm Additional equipment: Rotary pallet changer, chip conveyor, 40 bar internal coolant supply, 1500 l coolant tank, Rapid traverse: 26 m/min in X and Y, 20 m/min in Z Feed rate: 20 - 10,000 mm/min Spindle: 20 - 18,000 rpm, drive power 28/19 kW, max. torque 121/82 Nm (Total weight incl. accessories approx. 11 tons)

Condition: good (used), Year of construction: 1996, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, total height: 2,600 mm, total length: 3,100 mm, total width: 2,400 mm, table width: 800 mm, table length: 1,200 mm, rotational speed (max.): 15,000 rpm, overall weight: 10,000 kg, For sale is a 3-axis DECKEL-Maho DMC 100V. The machine is in good condition and ready for immediate use. Technical data: Year of manufacture: 1996 Control: Heidenhain TNC 426 Spindle operating hours: 20,843 X-axis: 1,000 mm Y-axis: 800 mm Pgedpfxjxrty So Aaheu Z-axis: 500 mm Spindle speed range: 15,000 RPM Table load capacity: 1,200 kg Table: 1,200 x 800 mm Tool holder: SK40 Tool positions: 30 Width: 2,400 mm Depth: 3,100 mm Height: 2,600 mm Weight: 10,000 kg Transport and loading can be organized throughout Europe upon request and for an additional charge. Prices are subject to VAT. Inspection possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Buying / Selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For more information or contact options, please visit our website.

Condition: excellent (used), operating hours: 4,019 h, functionality: fully functional, For sale is a machining center from DECKEL MAHO model DMC 63 V. The machine is fully functional and can be inspected by appointment by telephone. Pgodpforrf Eajx Aahsu

Condition: excellent (used), Year of construction: 2003, Machining center Deckel Maho DMU200P - very good condition - Available Immediately - Worldwide Export Control: Heidenhain iTNC530 Travel: X-2000mm, Y-1800mm, 1,100mm clamping surface: 1,700 mm x 1,400 mm Spindle speed: 12,000 rpm Spindle mount: SK50 tool magazine: 60 seats Internal coolant supply (IKZ) and chip removal package: 40 bar chip conveyor: , Pgsdpfx Aajxrgitohou probe: Heidenhain TS642 electric handwheel: Heidenhain operating mode: 4 High-speed spindle attachment: 42,000 rpm automatic swivel milling head: B-axis NC rotary table: C-axis Tool measurement: Blum Laser 3-D Quickset: , Tools: 60 x SK50

Condition: used, Year of construction: 1999, x-travel 800 mm Pgedpfx Aasxrg Ehshju y-travel 650 mm z-travel 550 mm Control Mill Plus auto power on hours ca. 45.000 h turning speed range - main spindle 30.000 min/-1 tool taper HSK 50 E In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: ready for operation (used), Year of construction: 2003, operating hours: 42,368 h, General Data Machine weight 6800 kg Control Unit Brand HEIDENHAIN Model iTNC 530 Main Drive Spindle speed range 12000 Tool taper SK40 Pedpexqtbgsfx Aahjgu Number of axis 3 Movement X-Axis Movement 640 mm Y-Axis Movement 600 mm Z-Axis Movement 500 mm This 3-axis DMG DECKEL MAHO DMC 64 V linear was manufactured in 2003. It features a 640 mm X-axis, 600 mm Y-axis, 500 mm Z-axis, and a table size of 850 x 600 mm. Equipped with a Heidenhain iTNC 530 control unit, SK40 taper, and a tool magazine with 30 tools capacity. Consider the opportunity to buy this DMG DECKEL MAHO DMC 64 V linear vertical machining centre. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2001, - USED - 5-AXIS VERTICAL MACHINING CENTRE WITH ROTARY AND TILTING TABLE X-AXIS TRAVEL: 500 mm Y-AXIS TRAVEL: 400 mm Z-AXIS TRAVEL: 400 mm SPINDLE: 9000 rpm; 13 kW; HSK 63 B-AXIS: -10° +95 ° C-AXIS: 360 ° TABLE SIZE: 700 x 500 mm MAX ADMITTED LOAD: 200 Kg TOOL MAGAZINE: CHAIN-TYPE ; 16 POS CONTROL UNIT: HEIDENHAIN WEIGHT: 3000 Kg OVERALL DIMENSIONS: 2000 x 1520 x 2140 mm ACCESSORIES: SWARF CONVEYOR NOTE: MANUAL 5th AXIS Pedpfx Aaowl R Dqshsgu

Condition: like new (used), Year of construction: 2012, operating hours: 23,252 h, travel distance X-axis: 735 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller manufacturer: 3D-Control Siemens 840D, workpiece diameter (max.): 840 mm, workpiece weight (max.): 600 kg, total height: 2,897 mm, total length: 3,567 mm, total width: 2,615 mm, table width: 650 mm, table length: 650 mm, overall weight: 12,100 kg, spindle speed (min.): 18,000 rpm, tool length: 315 mm, tool weight: 8,000 g, Year of construction: 2012 CNC controller: 3D-Control Siemens 840D Axes X-axis travel mm: 735 Y-axis travel mm: 650 Z-axis travel mm: 560 C-axis degrees: 360º (0,001) A-axis degrees: ±120(0.001) Feed rates m/min: 40 Rapid traverse m/min: 40 Acceleration in the axes m/s2: 6 Milling/turning table nc: Number of pallets: 1 Table dimensions mm: Ø650 Maximum workpiece size (D x H) mm: Ø840x500 Max. workpiece weight kg: 600 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 13/9 (40%ED/cont) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 600 Tool system Tool holder: SK 40 Pjdpfxsxrr I Io Aahogu Tool magazine slots: 30 Tool changer: Double Gripper With free neighboring places mm: 160 Max. Tool Length mm: 315 Max tool weight kg: 8 Chip-to-chip time s: 4.9 Equipment Electronic Handwheel Chip conveyor Rigid table with integrated rotary table Infrared probe Internal cooling lubricant supply Rinsing gun Paper band filter Machine running times Under power: 23252 Spindle Working: 6497 Basic machine dimensions / weight Length mm: 3567 Width mm: 2615 Height mm: 2897 Weight kg: 12100

Condition: used, Year of construction: 2008, x-travel 1000 mm y-travel 1000 mm z-travel 1000 mm Control Siemens 840D powerline spindle tunring speed 8.000 U/min drive capacity - main spindle 100/40% ED 32/44 kW Pgedpfsxcp R Uox Aahsu tool taper HSK-A 100 number of tool places 354 Pos. rapid traverse ( x / y / z ) 60 m/min size of pallet 800 x 800 mm In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features: - NC rotary table with pallet carrier - Rotary pallet changer - 40 bar internal coolant supply - Rotating viewing window - Wall-mounted magazine with 300 magazine positions - Rotating wall tool lock, 30 positions (inactive) and 54 positions (active) - Infrared measuring probe - SK 50 mechanical tool breakage detector - Tool identification - 4-color signal lamp Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: ready for operation (used), Year of construction: 2002, Movement X-Axis Movement 700 mm Y-Axis Movement 550 mm Z-Axis Movement 500 mm This 3-axis DECKEL MAHO DMC 70 V was manufactured in 2002. It features a 30-position tool changer, a spindle speed of 18,000 rpm, and a chip conveyor. The control system is a TNC 430. Note: tool keys in Z direction are defective. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMC 70 V machine we have for sale. Contact us for more information about this machine. Application Types Milling Pgjdpjxrwi Defx Aahsu

Condition: ready for operation (used), Year of construction: 2016, Control Unit Model ITNC 530 Main Drive Tool taper SK40 Number of axis 5 Movement X-Axis Movement 735 mm Y-Axis Movement 650 mm Z-Axis Movement 550 mm Pgodpexpyv Ujfx Aahsu Additional Equipment Graphite package options Mist extractor (external) This 5-axis DMG DECKEL MAHO DMU 65 monoBLOCK milling machine was manufactured in 2016. It features a robust X-Y-Z travel of 735mm, 650mm, and 550mm, and is equipped with an SK40 spindle and an ITNC 530 control system. Additionally, it includes a graphite package with an external mist extractor. Ideal for complex machining tasks, the DECKEL MAHO DMU 65 monoBLOCK machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2005, operating hours: 69,995 h, Control Unit Brand HEIDENHAIN TNC 530 Main Drive Number of axis 3 Movement X-Axis Movement 885 mm Pgedpfexn U Ddex Aaheu Y-Axis Movement 600 mm Z-Axis Movement 600 mm Table Table load 600 kg This 3-axis DECKEL MAHO DMC 75 V Linear was manufactured in 2005. It features a travel range of 885 x 600 x 600 mm and a maximum feed speed of 90 m/min. The machine includes a high-capacity coolant system and an efficient scraper belt conveyor for swarf disposal. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMC 75 V machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2000, operating hours: 48,804 h, General Data Measurements width 7000 Measurements depth 5000 mm Machine weight 3400 kg Control Unit Pgodpfx Aasxrwfxshou Brand SIEMENS Model Sinumerik 840D Main Drive Spindle speed range 8000 Number of axis 4 Movement X-Axis Working Feed 60000 mm/min X-Axis Rapid Traverse 60 m/min Y-Axis Working Feed 60000 mm/min Y-Axis Rapid Traverse 60 m/min Z-Axis Working Feed 60000 mm/min Z-Axis Rapid Traverse 60 m/min X-Axis Movement 600 mm Y-Axis Movement 560 mm Z-Axis Movement 560 mm Table Table load 350 kg Tools Slots in storage 90 Max weight 10 kg Max tool diameter 80 mm Max tool length 350 mm Type of tool holder DIN 69871-SK40 Media Chip conveyor Yes Additional Equipment Coolant Type/Content: Emulsion (internal & external) / approx. 1100L Coolant Unit: Knoll with drum filter 30, 40, 50 bar via M-command Machine Accuracy: VDI / DGQ 3441 Renishaw Measuring Probe Tool Breakage Detection Drum filter Pallet Sequential Operation Enclosed Work Area Enclosure Network Connection Technical Documents and Layout Plan available This 4-axis DECKEL MAHO DMC 60H hi-dyn was manufactured in 2000. It features a Siemens Sinumerik 840D control, a spindle speed up to 8000 rpm, and a 90-position tool magazine. The machine includes a pallet changer with 4 storage locations and a rapid traverse rate of 60 m/min. Ideal for high precision horizontal machining. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2005, operating hours: 5,873 h, Control Unit Brand HEIDENHAIN Main Drive Number of axis 5 This 5-axis DMG Deckel Maho DMU 60 monoBlock was manufactured in 2005. It features a B-axis and rotary table attachment, 3D probe, and MillPlus IT CNC control system. With 5873 operating hours and 1397 spindle hours, it also includes a minimum quantity lubrication system. If you are looking to get high-quality milling capabilities, consider the DMG Deckel Maho DMU 60 machine we have for sale. Contact us for more information about this machine. Pgjdjxq Htcepfx Aahou Application Types Milling

Condition: ready for operation (used), Year of construction: 2008, Main Drive Number of axis 5 This 5-axis DMG DECKEL MAHO DMU 70 eVo was manufactured in 2008. Consider the opportunity to buy this DMG DECKEL MAHO DMU 70 eVo universal machining centre. Contact us for more information. Pgodpfjw E Rnpex Aahou Application Types Milling