Used Gidue Combat 2 370 6 Uv Flexo Printing Machine for sale (1,22,167)

Year of construction: 2000, condition: repair required (used), functionality: limited functionality, Plate cylinders: z68, z74, z80, z85, z96, z101, z104, z114, z116, z120, z136 Cliché cylinders: z68, z74, z78, z80, z85, z85, z96, z101, z104, z114, z120, z136 Anilox rollers: 400x3.5, 4 pieces 320x4, 1 piece 280x5, 1 piece 200x6, 1 piece 140x8, 2 pieces 100x10, 1 piece Gapmaster Itsdozqr H Uepfx Agpok 2 rewinders, one of which needs repair.

Condition: excellent (used), Year of construction: 2014, • Substrate width : max 430mm • 8 Flexo Printing Unit • (Fully servo driven: double servo motors on print cylinder and impression roller) • 8 UV dryer • Temperature Control • Driven Chilled Drums • Chilling unit • Front load unwinder with motorized roll lifting • Unwinder with magnetic particle clutch (max. reel diameter 1.000 mm.) • Automatic Web Guide • Video inspection with manual camera movement • Servo Infeed group • 2 Die-cutting stations (male-female die-cutting possible) - servo • 1 Gap Master • Waste matrix rewinder diameter : Snowball 605mm • Servo Outfeed • Organizer (includes crane to remove and store die-cutting tools) • 3 Web break detectors • 3 antistatic bars • Motorized rewinder (max. reel diameter 1.000 mm.) • Local touch screen panel on each printing and die-cutting station • Main touch screen panel (PC MHI) • Direct Internet Connection for remote SW and HW service and upgrades • Automatic pre-register, register and tension control • Vario™ - Servo driven infeed and outfeed (includes 2 active load cells) • GIDUE mark-to-cylinder ARC register control • Servo driven die-cutting units (1 servo motor per unit) Ijdpfx Ajv Tzhqegpjtk • Second pass register control • Print Tutor™ An "intelligent" camera automatically detects print register and pressure marks and performs completely automatic register adjustment, during the set-up and during production. It includes additional servo motor for lateral register adjustment (lenght register adjustment is built in servo driving motor of the print cylinder. • Delame/Relam 2K • Turn bar • Lamination and cold foil • Corona treater • Web Cleaner •

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 2024126, product width (max.): 650 mm, working width: 650 mm, We are offering this very well-maintained, two-color flexographic printing machine, manufactured in 2024. Machine designation: Flexographic printing machine / 2-color / for a web width of up to 650 mm Manufacturer: China Wenzhou Hongyang Machinery Co. Ltd. Model: HYR-650-2 Serial number: 2024126 Year of manufacture: 12/2024 Condition: very good (used) Functionality: fully functional Dismantling and transport must be organized by the buyer at their own expense. Itedpfx Agjzmul Sjpjk If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, number of ink cartridges: 26, color channels: CMYK + White + Varnish, number of print heads: 6, resolution (max.): 1,200 dpi, paper width (max.): 3,200 mm, paper height (max.): 50 mm, total width: 3,200 mm, counter reading (color): 1,328, year of last overhaul: 2025, type of input current: AC, input current: 15 A, input voltage: 240 V, We offer this used Liyu DSJ3204 UV HYBRID Digital Print Machine, year of construction 2022. Model number: DSJ3204 Year of manufacture: 2022 Serial number: M33DB0012C0E0 Net weight: 2400 kg Voltage: 200-240 V Current: 15 A Power consumption: 3300 W Frequency: 50 Hz Country of origin: China €63,900 including dismantling at our location and setup at the buyer's site by manufacturer Liyu Price is subject to negotiation (Transport to the customer and unloading at the customer's site are to be organized and are the responsibility of the customer/buyer.) Liyu Platinum EQ3 LED Hybrid Flatbed and Roll-to-Roll UV Printer Condition: Lightly used and in excellent condition Flatbed and roll-to-roll printing INCLUDES 3 mm aluminum composite panels 3050 mm x 1500 mm approx. 24 pieces INCLUDES 3 mm foam board 3050 mm x 2030 mm approx. 160 pieces Includes 26 unopened 1-liter bottles of UV ink Printed output approx. 1328 m² as of May 6, 2026 The Platinum EQ3 hybrid printing press is a state-of-the-art machine that meets the demands of modern printing. This machine boasts a wide range of features that enable users to complete their tasks more efficiently. The convenient dual-sided material feed accelerates the workflow and saves time and effort. Furthermore, the 4-zone vacuum system ensures that the material is securely held in place – resulting in higher print quality and a reduced risk of material shifting. Collision and safety sensors play a crucial role in workplace safety. They detect potential collisions and protect both the operator and the machine. The Platinum EQ3 Hybrid can print on materials up to 50 mm thick, opening up a broad range of application possibilities. This flexibility allows for the processing of a variety of materials for diverse projects. The automatic material height measurement system facilitates the precise adjustment of material parameters for accurate printing results. This feature not only improves print quality but also reduces material waste. Number of printheads: 6 RICOH GEN6, 6pl Printheads can be upgraded by speed up to 16 printheads. Iodpsy Nl E Refx Agpetk Inks: Currently CMYK, White, Vanish Print resolution: 1200 dpi Print speed (maximum): 180 m²/h Flow height: 50 mm Color gamut: CMYK + White + Light + Luminaire + Varnish Ink types: UV LED Drying system: UV LED Accessories: Includes inks (Cyan x 1, Magenta x 3, Yellow x 1, Black x 3, White x 2, Varnish x 3, Cleaning Solution x 3, each in 1-liter containers) and cleaning wipes. Further pictures and videos available upon request. For greater distances, a viewing can also be conducted via live video.

Condition: good (used), MBO K760E S-KTL/6+ Folding Machine with SBAP 82ME Press Manufactured in 2016. Paper format: 760x1100mm Maximum speed: 180m/min High stack feeding, FP-95 pallet feeder 6 cassettes on the first unit 2 knives 1 side cassette after the knife Additional veneer cassette. Sound insulation on all units MBO SBAP-82ME stacking press Spare parts and documentation included. The machine is in perfect condition, ready to work. Iedpfszlaimex Agpjtk

Year of construction: 2018, condition: excellent (used), functionality: fully functional, We are offering a high-productivity 3D printer designed for industrial serial production. The system was last used with AlSi10Mg aluminum powder. The 3D printer has already been dismantled by the manufacturer. Dismantling and functional reports are available, confirming the machine was operational prior to dismantling. All axes have been professionally secured for transport. The machine can be transported on a standard truck. TruPrint 5000 G4 Serial number S0731C0008 Year of manufacture: 08/2018 Laser operating time Laser 1 "Beam on" time: 5,165 hrs Laser 2 "Beam on" time: 5,096 hrs Laser 3 "Beam on" time: 5,023 hrs Trumpf TruPrint 5000 including Powder Bed Monitoring and Melt Pool Monitoring options Filter system Accessories: 2x Build cylinders 3x Dosing cylinders 1x Overflow container (used) 1x Overflow container (NEW) Manuals 4x Heat exchangers (NEW) 2x Easy Filters (NEW) 3x NTRON SIL02 Oxygen Analyzer + Sensor (NEW) 1x Oxygen sensor (NEW) ...and much more, such as seals, etc. An Armanni CAR.Elev. pallet truck for changing containers is also in stock and can be offered as an optional extra. Isdozpvdzopfx Agpotk Get high-quality 3D components faster The TruPrint 5000—a high-productivity, semi-automated 3D printing system—prepares you for industrial serial production. With features such as optional 500°C preheating and a full-field multilaser configuration utilizing three 500-watt TRUMPF fiber lasers, you are ideally equipped for highly demanding industrial applications. The machine manufactures high-quality components from various metallic materials quickly and reliably, meeting the rigorous quality standards of tool and mold making—including via 3D printing onto preform blanks—as well as those of the aerospace and medical technology sectors. Optionally, the entire process chain—sieving, printing, cooling, and depowdering—can take place in a protective gas atmosphere. Combined with TRUMPF’s external part and powder management systems and monitoring solutions, it is ideally suited for industrial additive serial production. Thanks to the preform option, the TruPrint 5000 supports hybrid component production. In this process, the additive component structures are built directly onto a blank. This innovative option is particularly well-suited for easy handling in tool and mold making. TruPrint 5000 Build volume (cylinder) mm x mm Ø 300 x H 400 Ø 290 x H 390 (Reduced if preheating >200 °C) Processable materials[1] Weldable metals in powder form, e.g., stainless steels, tool steels, aluminum, nickel-based, or titanium alloys Build rate[2] cm³/h 5 – 180 Layer thickness[3] μm 30 – 150 Max. laser power at workpiece (TRUMPF fiber laser) W 3 x 500 Beam diameter[3] μm 100 – 500 Min. measurable oxygen content ppm Up to

Year of construction: 2013, condition: excellent (used), functionality: fully functional, 2013 Maximum width: 370 mm 10 colors Rail Combo laminator on rail Web turn bar Chilled drums Chiller 2 die-cutting stations Itedpfx Aew Sw Rpegpek 5 x Hot Air dryers Tooling

Condition: used, Year of construction: 2019, functionality: fully functional, Flexographic printing machine Rotary Print 260 from 2019, Tech-Wash 8 UV colours Manual colour registration Web guiding control One die-cutting station Web width: 250 mm Max. roll diameter on unwinder: 1000 mm Max. roll diameter on rewinder: 1000 mm Max. roll diameter (matrix) on rewinder: 500 mm Machine working speed up to 120 m/min depending on material type Units for web-turning, peel-off, lamination included Itjdexrdb Hepfx Agpsk Comes with 10 anilox rolls, 7 sets of printing cylinders, and 7 magnetic cylinders. Machine is 100% operational and in continuous use.

Condition: ready for operation (used), Year of construction: 2005, A complete 8-color Fischer & Krecke flexographic printing system is available. Number of colors: 8, max. print width: 1250mm, max. material width: 1300mm, repeat print length min./max.: 320mm/800mm, max. mechanical speed: 360m/min, printable materials: PET (min. 12µm)/PP/OPP/LDPE/laminate materials. Inks: solvent-based, drying: thermal oil. Roll diameter: 800mm, core diameter: 76mm/152mm. Including BST Video Web Inspection System Premius, cleaning system Flexpress AutoClean (ACA), viscosity control Bloss Viscolor 1300, automatic roll change and rewind Flying Splice as well as an additional chill roll with a diameter of 460mm. Documentation available. On-site inspection is possible. Itodpfxjvva E Hs Agpjk

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 88462-85, feed length X-axis: 30,000 mm, feed length Y-axis: 30,000 mm, feed length Z-axis: 30,000 mm, travel distance X-axis: 760 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 42,000 rpm, total height: 2,700 mm, total width: 3,000 mm, total length: 5,000 mm, table width: 550 mm, table length: 860 mm, overall weight: 7,000 kg, workpiece weight (max.): 800 kg, controller manufacturer: RÖDERS, controller model: RMS 6 VERSION 4.20, positioning accuracy: 0.005 mm, Equipment: documentation/manual, RÖDERS RFM 760/2 HSC Milling Machine - Includes two EROWA clamping systems - Additional matching accessories - A cooling system and extraction system - Also includes a workbench with fixtures and a 3D measuring probe Itedpfx Agozlfa Djpjk Note: The machine can be transported on a standard truck! Note: The item must be picked up between September 8th and 10th, 2026, on a date to be confirmed. FCA D-63128 Dietzenbach - loaded onto a truck.

Year of construction: 2006, condition: ready for operation (used), A complete bottle washing and filling line is available. 1) Rotary rinsing machine Augenstein RI 1600/48/6, year of manufacture: 2006. 2) Filling machine Deckert Rudolf IFM 420-2, year of manufacture: 2003. 3) Bottle unscrambler Pace Packaging M-400 PR SSD, year of manufacture: 2004. 4) Bottle capping machine Alcoa 6208/360, year of manufacture: 2003. Including cap feeder Augenstein, year of manufacture: 2008. 5) Packaging and labeling line Sleever MSA 5120 LS4, year of manufacture: 2013, labels: shrink sleeve labels, steam consumption: 150kg/h. 6) Weighing and metal detector unit Mettler Toledo XS3, year of manufacture: 2008. Line capacity: 9000bottles/h, bottle volume: 150ml, filling volume: approx. 150cm³, max. bottle diameter: 48.9mm, bottle height: 115.5mm, filling medium density: 1335kg/m³. Documentation available. An on-site inspection is possible. Itodoy I Ac Depfx Agpjk

Condition: used, Year of construction: 2000, The Carint central impression flexographic printing press is designed for printing on PE, PP, OPP, PET films, and paper. The machine features 6 printing units (6+0), a geared drive, and is suitable for a wide range of flexible packaging applications. Material width: 1,280 mm Printing width: 1,250 mm Print repeat: Min: 360 mm / Max: 1,040 mm Mechanical speed: Up to 300 m/min UNWINDER AND REWINDER The machine is equipped with a non-stop turret unwinder and a non-stop turret rewinder. Maximum reel diameter: 800 mm. Expanding shafts: 3" DRYING SYSTEM Electrical drying system. INK SUPPLY 6 pneumatic ink pumps. ACCESSORIES • Motorized longitudinal register • Chamber doctor blade system • 8 Anilox cylinders • 6 Plate cylinders • Video inspection system • Web guides • Banana rollers • Plate cylinder lifting hoist Itjdjzku Nlopfx Agpok • 2 electrical hoists • 2 cylinder storage racks with 6 cylinders of various repeat sizes

Year of construction: 1992, condition: excellent (used), machine/vehicle number: 24, Kom.No.: 551.3852 Colours: 6 Equipment / Additional information: Consists of: • Stacker • Printing machine Ijdjn D E A Tspfx Agpstk • Cup feeding • Stapler Technical data Printing unit type DW 200-230 Plate cylinder diameter 200 mm Max. possible print image width 110 mm Number of print segments 4 pieces Max. cup rim diameter 130 mm Min. cup rim diameter 70 mm (55 mm) Max. print image unwinding (specific plate unwinding) (361 mm) / D 115 Max. cup height 130 mm Min. cup height 35 mm Max. bevel 10 degrees Production speed depending on cup size, quality and raw materials with UV drying up to 24,000 C/h El. connection value (machine, drying and stacking) approx. 35 KVA El. control with Siemens PLC / control station with 2-line display Voltage is 400V, 3 phase, neutral and ground. 50hz is the frequency.

Condition: ready for operation (used), Year of construction: 2014, Printing technology: piezo DOD printheads: Xaar 1001, resolution: 720x360dpi, drying: 1xUV GOZ and 1xUV FOZ Höhnle with 7,2kW, pinning system (LED) after printing unit 1+5, extraction: in the drying unit for cooling the UV lamps and for odor minimization and improvement of sensory conditions, inert gas system: oxygen-reduced curing unit (inert gas system), consumption: under 6m³/h, printing: roll-to-roll, web width: 350mm, print width: 330mm, repeat length: min./max. printable section length 10-1000mm, print tolerance: single spacing +/-0,2mm, cumulative spacing: +/-1,5mm (over one meter), register: register accuracy +/-50μm, max. speed: 48m/min with 4 colors depending on ink coverage, white at 30m/min, speed must be preselected from 18 to 48m/min, print pre-treatment: corona with 1500VA, web cleaning: polymer rollers LC 350, air shafts: for cores with 76mm diameter for unwinding and rewinding, air shaft clamping pneumatic, clamping releasable to allow rotation of the winding mandrel, max. roll diameter for unwinding and rewinding: 610mm, max. roll weight for unwinding and rewinding: 120kg. power consumption: approx. 39kVA/60A, air consumption: 100NL/min, cooling capacity: approx. 60.000BTU/h =18kW, data interface: USB2.0, Ethernet, data format: PDF-X1 or X3 or EPS or AI, length: 4550mm, width: 1750mm, height: 2200mm, weight: approx. 3t. With documentation, chiller unit and inks. The machine is fault-free, complete and ready for operation, and has been serviced regularly. On-site inspection is possible. Itsdpfx Ajxz Ewnegpjk

Condition: ready for operation (used), Year of construction: 2015, A digital Agfa UV large-format hybrid printing system is offered. Print resolution: 720dpi/1440dpi, max. print speed: 53m²/h, ink configuration: CMYK + lc + lm + white, max. media width: 2050mm, max. print width: 2000mm, max. media thickness: 45mm, max. board weight: 10kg/m². Machine dimensions X/Y/Z: approx. 4350mm/1470mm/1600mm, weight: approx. 1800kg. Including 4 nearly new tables for board printing and a workstation. The ink configuration is currently converted for traffic sign ink. Conversion back to standard CMYK is possible. An on-site inspection is possible. Itodpfx Asznc Rljgpok

Condition: used, Year of construction: 2022, PRODUCT TYPES: • Four side seal pouches • Quad seal pouches • Side seal pouches • Transverse zipper pouches • Gusset pouches • Bottom stick hole pouches • Micro-perforated pouches • Handle hole pouches • Round corner pouches MATERIALS: • LDPE • CPP • MCPP • AL • Nylon • PP • Laminated film structures MAIN TECHNICAL INFORMATION: Material thickness: 60–250 μm Max. web width: 1300 mm Max. roll diameter: 800 mm Core diameter: 3” and 6” Isdpfx Aszf Nk Togpotk Max. pouch width, quad seal: 400 mm Max. pouch length: 1000 mm Eye mark accuracy: ±1 mm Machine speed: 15–65 pcs/min Material speed: 40 m/min Main power: 400V, 50Hz, 3 phase Installed power: 100 kW Machine weight: approx. 18,000 kg Machine size: 33,500 × 4,200 × 1,800 mm POUCH SIZE RANGE: Quad seal / side welded width: 180–400 mm Gusset depth: max. 80 mm Minimum gusset depth: 30 mm Bag length: 360–1000 mm UNWINDING SECTION: • Air shaft unwinding • Magnetic powder brake • Dancing roller tension control • Servo-driven unwind system PERFORATION SYSTEM: • Micro perforation unit • Wheel type perforation • Additional perforation holes • Same type as existing machine configuration FOLDING SYSTEM: • Four side seal / quad bag folding wheel section SEALING AND COOLING SYSTEM: Mechanical press sealing system: Quad seal longitudinal sealing: 2 groups, 1010 mm Quad seal longitudinal cooling: 2 groups, 1010 mm Cross sealing station: 6 sets No. 1: K-seal No. 2: Gusset filling sealing No. 3: Cross seal, 740 mm length / 60 mm width No. 4: Cross seal, 740 mm length / 60 mm width No. 5: Cross seal, 740 mm length / 60 mm width No. 6: Cross cooling, 740 mm length / 60 mm width Additional 5 mm sealing section, upper and bottom PUNCHING SYSTEM: Tear slit / notch puncher 3-hole handle puncher Handle puncher: 20 × 80 mm, 3 sets Hole sizes: • 3 holes Ø20 mm • 20 × 80 mm • 24 × 77 mm Round corner puncher: 2 sets Puncher supports: 3 sets Bottom stick hole puncher: • 12 mm, 8 pcs • 16 mm, 8 pcs Vacuum system for punch waste removal DRIVE SYSTEM: Main motor: 3.5 kW Back draw roller servo: 3.5 kW Front draw roller servo: 3.5 kW Middle draw roller servo: 3.5 kW Longitudinal independent sealing servo: 5 kW × 2 Unwind servo motor: 1.5 kW × 1 / 3.5 kW × 1 Tension control servo: 3.5 kW × 1 Flying knife servo: 1.5 kW × 1 Manipulator sucker drive: 0.75 kW × 1 Finished product carrier counting drive: 0.75 kW × 1 CONTROL SYSTEM: • PLC control • 10” touch screen • Suitable for printed and unprinted bags • 16 temperature control zones • Individual temperature display • Temperature tolerance: ±2°C • High-sensitive eye mark sensor • Adjustable eye mark position STACKING SYSTEM: • Simple type stacking table • Static removal system • Automatic stop when machine stops • Alarm for bag output range: 25–100 bags • Step motor belt control • Belt width: 60 mm • Adjustable batch and belt length SAFETY SYSTEM: • Safety light curtain • Emergency pulling rope • Emergency buttons every 2 meters • Individual emergency control INCLUDED OPTION: ZIPPAK transversal zipper attachment Transversal zipper unwinder and rewinder Innolock / Velcro zipper capability Tooling for 3 zipper sizes: • 180–220 mm • 230–300 mm • 310 mm Micro-perforation holes Bottom stick hole puncher Trim rewinders Chiller

Condition: ready for operation (used), Year of construction: 2001, Number of colors: 8, max. mechanical machine speed: 460m/min, gear pitch: 10mm, print length: 300-1200mm, max. print width with endless sleeve technology: 1270mm, max. print width without endless sleeve technology: 1250mm, max. material width: 1320mm, max. unwind roll diameter: 1000mm, max. rewind roll diameter: 1000mm, sleeve inner diameter: 76mm, sleeve outer diameter: 85mm, max. roll weight: 1,24t, web tension ranges, unwinding without draw: 40-350N, unwinding with draw: 25-350N, rewinding without slitter: 25-450N, rewinding with slitter: 30-450N, draw: 25-450N, suitable materials: LDPE, PP, PA: 20-150µm, HDPE, OPP: 12-100µm, max. laminated films: 120µm, paper: 30-120g/m². Equipment: unwinder, rewinder, control panel, corona treatment, Turboclean ink supply system, numerous printing cylinders, anilox rollers and additional accessories, with documentation. An on-site inspection is possible. Iedpfxszuktus Agpstk

Condition: used, Year of construction: 2000, functionality: unexamined, machine/vehicle number: EE425200, paper weight (max.): 400 g/m², paper width (max.): 720 mm, paper height (max.): 520 mm, input voltage: 380 V, Purchased in working condition and transferred to our warehouse. It is currently not in working condition. Ink and water rollers need to be replaced soon. Simultaneous front and back printing is possible. Very suitable for book printing. Itedpjy Emmzsfx Agpjk

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: DM2AE437, number of ink cartridges: 6, color channels: CMYK + Weiß + Lack, number of print heads: 3, resolution (max.): 1,200 dpi, paper width (max.): 300 mm, paper height (max.): 420 mm, total length: 1,290 mm, total width: 1,355 mm, total height: 856 mm, counter reading (color): 41, type of input current: AC, input current: 5 A, input voltage: 230 V, Equipment: raster image processor, Title: Mimaki UJF-3042 MkII e (Year: 2022) – Only 41 m²! Incl. Kebab & Pro Starter Package (SURA, UV DTF A+B Films and Stand) Description: For sale is a high-end professional UV printing system: A Mimaki UJF-3042 MkII e (year 2022) including the premium Kebab option. This machine is being sold due to a business closure and is a real rarity on the used market: According to the counter, the unit has only produced a total print output of 41 m². Here you are getting a system in like-new condition at an attractive used price. The printer was meticulously maintained and kept permanently connected to the power supply to ensure proper execution of automatic maintenance and circulation cycles (to prevent nozzle outages). Technical Highlights & Features: - Model: Mimaki UJF-3042 MkII e (current generation) - Year of Manufacture: 2022 - Condition: Like new (only 41 m² total printing volume) - Configuration: CMYK + White + Varnish (LH 100) - Kebab MkII Option: Included (original Mimaki unit for 360° all-round printing on bottles, glasses, etc. – new price approx. €2,700) - Software: RasterLink 7 RIP software included 🎁 EXCLUSIVE FREE PACKAGE (Additional accessories worth approx. €4,000!) Because we are liquidating the entire operation, we are giving away the following professional equipment for pre- and post-processing together with the printer. These components are not sold separately – a real turnkey package for your production start: 1. SURA Instruments Pyrosil GVE 2 HB Professional flame-treating unit for silicatization (surface pre-treatment). Ensures extreme adhesion on glass, metal, ceramic + plastic. Includes torch, gas hose, and approx. 80% remaining adhesion promoters. Current new price: approx. €2,900 net 2. Material Starter Set Includes UV-DTF film set (A+B). Itodpfeyr Aiwex Agpek 3. Sturdy Machine Stand Customized, stable table/stand for the Mimaki. Ensures a secure, stable hold during printing and the optimal ergonomic working height. Pricing & Sale Details: Sale is as a complete package with formal invoice and VAT shown separately. Location & Collection: The machines are located in 33178 Borchen. A current nozzle test can be demonstrated during inspection. If interested or to arrange a viewing appointment, please contact us directly via the messaging function.

Condition: excellent (used), Year of construction: 2020, operating hours: 19,409 h, functionality: fully functional, number of ink cartridges: 8, color channels: CMYK + Primer + Clear + White + White, number of print heads: 2, resolution (max.): 1,200 dpi, paper width (max.): 2,500 mm, paper height (max.): 1,300 mm, total length: 4,400 mm, total width: 2,450 mm, total height: 1,250 mm, counter reading (black): 3,023, year of last overhaul: 2026, type of input current: three-phase, input current: 16 A, input voltage: 400 V, Mimaki JFX200-2513 UV-LED Flatbed Printer (Model 2020) Professional UV-LED flatbed printer from a single owner – in top condition & serviced annually by a specialist company. For sale is a well-maintained Mimaki JFX200-2513 UV-LED flatbed printer from 2020. The machine comes from a single owner and has only been used in a professional environment. It was exclusively used to print on glass using printing stencils. To guarantee maximum operational reliability and perfect print quality, the system has been serviced annually by the renowned specialist company ESC. All print heads are in good condition (see nozzle test). The last check, including the replacement of wear parts, was carried out by a specialist company in July. Technical data & operating hours (values read from the interface): Printing area: 2,500 mm x 1,300 mm (up to 50 mm media height) Operating hours (Use Time): 19,409 h Printed length: Print Length: Only 3,023 m, Print Area is currently only 5142m² UV lamps (LED): 2 UV-LED lamps (Note: Extremely long-lasting UV-LED technology) Printing area: 2,500 mm x 1,300 mm (up to 50 mm media height) Ink configuration & special features: Ink type: Mimaki LUS-120 (Excellent adhesion and flexibility on rigid and flexible media) Color configuration: CMYK + Primer + Clear (Varnish) + White + White Your advantage: The double white configuration provides extremely high opacity and speed when printing undercoat or overcoat. The integrated primer and clear varnish enable smart finishing options (spot varnish/textures) and printing on demanding materials such as glass, metal, or acrylic. Itjdszt Dmrspfx Agpek Accessories & highlights included in the scope of supply: Including a powerful suction fan (vacuum add-on): Keeps even uneven or lightweight sheet materials perfectly flat on the printing table. Transport securing device available: The original transport securing device for safe shipping is fully available. Location & removal: Easy logistics: The hall has a large roller shutter door, which makes the removal for a specialist shipping company or a service company easy and straightforward on the ground floor. Inspection and test print can be arranged at the location. Price is net, plus VAT. Errors and prior sale reserved. This offer is exclusively aimed at commercial businesses and freelancers.

Condition: like new (used), Year of construction: 2020, operating hours: 1,000 h, functionality: fully functional, punching force: 300 t, overall weight: 18,000 kg, The equipment has been used very little,it is almost like new, and has under 1,000 operating hours. Max. sheet size: 1060×740mm Min. sheet size: 400×360mm Stock range: Paperboard157~2000gsm Corrugated board (E,B LUTE) Iodpfxewhvq Ij Agpjtk Min. gripper edge: 4mm Max. die-cutting size: 1040×730mm Max. pressure: 250tons Max speed: 7500sph Rules height: 23.8mm Main motor capacity: 11kw Total power capacity: 23kw Dimensions (L×W×H): 6000×4200×2400mm Net weight: 18,000kg

Condition: new, Year of construction: 2025, Roll forming metal siding “double façade panel” machine SPM-2 Itodpfxexghngo Agpjk Roll forming metal siding “double façade panel” machine SPM-2 is new design product of our company for façade and wall metal panels forming with the necessary configuration. These double façade panels are very popular in construction business of cladding residential buildings and industrial structures, for the construction of fences of various configurations, gazebos, roofing elements, etc. The SPM-2 metal siding production line is fully automatic and consists of a rolling part of the machine, an automation system and guillotine cutting shears at the machine exit. The line can have as additional parts a manual or automatic uncoiler for metal rolls, depending on the customer's needs. As standard version, this metal siding double façade panels roll forming machine SPM-2 makes a flat panel profile, but with the additional equipment, it is possible to roll panels with a microwave or rib shape profile. To start rolling, it is necessary to install a roll of metal to the decoiler and to put the end of the strip to the first rolling rollers of the equipment and feed it into them. After step by step, to put the metal to the next rollers, adjusting it if necessary. When metal comes to the cutting device of machine you need to feed metal into cutting knives and to make “zero” cut. After such step, equipment can move to automatic operation mode. The control panel of machine has the ability to set the number of tasks and the length of products, single tasks or to work in multitasking mode. After setting up necessary parameters the machine will automatically roll the metal cladding wall panels and cut them into necessary sizes. Thus, the customer will receive final product as quickly as possible and with the highest possible result. The roll forming speed is adjustable and can be up to 10-15 meters per minute. The SPM-2 metal wall cladding panels production line has special tools for punching out fastening holes on the side of the panel. It makes possible for the customer to get more interesting solution options and to offer a wider range of products to the end user. The rolling part of the machine has 18 pairs of forming steps, ensuring high quality of final product. You can get machine with protective cover or without it as per your request preferences. Specifications Material width (mm) 416 The material thickness (mm) 0,4-0,5 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Condition: like new (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: ‭3050223972‬, number of ink cartridges: 4, color channels: CMYK, Backup machine, only approximately 15,000 pages printed, Xerox-certified in March 2026, on-site testing possible. We are selling a Xerox PrimeLink C9265 with a Fiery server, which has been used as a backup machine and is in perfect, fully functional condition. As a funeral home, we print large quantities of memorial cards and high-quality color printing materials daily with our main machine. For this reason, we know what is important: clean skin tones, fine image details, high color accuracy, sharp prints, and reliable processing even with more demanding papers. This PrimeLink has proven itself in these areas: very high-quality printing, excellent color stability, user-friendly operation, and versatile paper handling. This machine is particularly interesting for: • Funeral homes that want to produce memorial cards, sympathy cards, or other sensitive print products in-house • Specialized dealers looking for a young, well-maintained machine with low usage • Printing service providers / agencies that need a reliable color system for high-quality short runs Condition / History • Purchased: July 2025 • Usage: Approximately 15,000 pages • Used as a backup system • No damage, no errors • Inspected by Xerox in March 2026 and found to be fully functional • On-site testing is expressly possible Technical Highlights • Printing, copying, scanning • 65 pages/minute in color and black and white • 2400 × 2400 dpi resolution • Single-pass duplex scanner with 250-sheet document feeder, according to Xerox with a scanning speed of up to 270 images/minute • Processing of coated and uncoated papers • Automatic duplex printing • High color quality thanks to LED array technology and HD EA toner • SIQA image quality adjustment for precise alignment and uniform density on different materials • Integration of Fiery print servers optional / supported; Fiery system included in this offer Equipment according to configuration • Xerox PrimeLink C9265 • Office Controller • Total paper capacity according to existing equipment: 3,260 sheets • 2 trays up to max. A3, 500 sheets each • 1 tray up to max. A4, 870 sheets • 1 tray up to max. A4, 1140 sheets • 250-sheet additional feeder • Scan to PC / USB / E-mail • Searchable PDF, PDF/A, TIFF, JPEG Isdpey Azqvefx Agpjtk Included • Xerox PL C9265 EFI-i 1.0 • Integrated server E600 • AMD GX-424CC processor 2.4 GHz • 2 GB RAM / 500 GB hard drive • Adobe PostScript Level 1, 2, 3 / Adobe PDF / EPS / PCL 6C / TIFF • Versatile output tray for PrimeLink C9265 • OCT Exit Fan Kit • Mounting kit 497K20390 • User Interface 097S04772 • Power Cord 497K18760 Key Data • Price incl. VAT and invoice • Payment by bank transfer • Collection by the buyer • Location: 84034 Landshut Alternatively, lease takeover possible Lease Takeover The machine is currently under a Grenke leasing agreement. We will cover the costs for the lease takeover / fees! The lease data according to the contract: * Leased object: Xerox PrimeLink C9265 * Lessor: Grenke * Monthly lease rate: 349.00 € net * Payment method: quarterly in advance * Remaining term: 50 months (starting in July) The transfer/sale of the lease agreement will, of course, only take place after review and approval by Grenke.

Condition: reconditioned (used), Year of construction: 2021, Jumbo roll diameter max. 900 mm Material width max. 380 mm Printing width max. 370 mm Rewind diameter max. 900 mm Machine speed 250 m/min Year of manufacture 2021 Low operating hours Consists of: - All machine components are servo-driven - 2 servo-driven Bobst flexo printing units min/max printing repeat 305-610 mm, UV drying, - Machine design complies with CE standards - 1 die-cutting unit, servo-driven - 1 matrix rewinder, diameter max. 600 mm - 1 turning bar - 1 inline slitting unit - 1 set of documentation Accessories: Iodpfxezn H Rij Agpotk - 4 Anilox cylinders - 10 printing cylinders - 5 die-cutting cylinders

Condition: used, Year of construction: 1995, Colors: 8 Gearless: No Fast Sleeve Change: No 4 motor CNC per printing deck: Yes Computer Supervision: Yes Web Width: 1320 mm Print Width: 1300 mm Min. Print Repeat: 380 mm Max. Print Repeat: 1100 mm Ijdpfx Agexzrx Eepotk Mechanical Speed: 350 m/min Working Speed: Up to 300 m/min Unwinding & Winding: Turret, FLYING SPLICE, Max. Reel Diameter 1000 mm Drying: 2 Zones, 4 Fans, 2 Gas Burners Video Camera: Yes Corona Treatment: No Web Guides: FIFE Viscosity Control: Yes Wash System: Yes, F&K Ceramic Anilox Rollers + Closed Chamber Doctor Blade 1x 80 L/cm, 2x 200 L/cm, 2x 120 L/cm, 4x 200 L/cm, 2x 320 L/cm, 3x 400 L/cm 200 sleeves, repeat between 390 mm and 1090 mm (8 for each repeat: 390, 400, 410, 420, 430, 450, 480, 510, 530, 540, 550, 630, 660, 670, 740, 780, 800, 850, 880, 930, 990, 1030, 1050, 1090 mm + 8 twinlock 740 mm + 8 twinlock 1030 mm) Mandrels for sleeves: 6x360 mm, 6x400 mm, 6x420 mm, 8x460 mm, 8x530 mm, 6x560 mm, 12x620 mm, 8x780 mm, 8x850 mm, 15x990 mm Printing cylinders: 8x380 mm, 8x390 mm, 12x400 mm, 8x410 mm, 8x450 mm, 6x460 mm, 7x470 mm, 4x490 mm, 12x500 mm, 8x510 mm, 12x530 mm, 8x540 twinlock, 6x560 mm, 8x570 mm, 8x580 mm, 8x590 mm, 12x620 mm, 9x640 mm, 12x660 mm, 6x670 mm, 6x730 mm Overall Dimensions: Length = 17 m, Width = 5 m, Height = 6 m Central Drum Diameter: 2280 mm